crop-chem-docs/corpus/epa_ppls/228-615.md

# CLASH SELECTIVE HERBICIDE

- EPA Reg No: **228-615**
- Registrant: NUFARM AMERICAS, INC.
- Signal word: Caution
- Active ingredients: Dicamba, diglycolamine salt (56.8%)
- Label accepted: 2025-08-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000228-00615-20250821.pdf

---
August 21, 2025
Amanda Kaufman
amanda.kaufman@nufarm.com
NUFARM AMERICAS, INC.
Subject: Non-PRIA (Pesticide Registration Improvement Act) Labeling Amendment - Updates
Product Name: CLASH SELECTIVE HERBICIDE
Admin Number: 228-615
EPA Receipt Date: 04/06/2021
Action Case Number: 00480137
Dear Amanda Kaufman:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
This approval does not affect any terms or conditions that were previously imposed on this registration. You
continue to be subject to existing terms or conditions on your registration and any deadlines connected with
them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously
accepted labeling. You must submit one (1) copy of the final printed labeling before you release this product
for shipment with the new labeling. In accordance with 40 CFR § 152.130(c), you may distribute or sell this
product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you
may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling.
“To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR § 152.3.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under FIFRA and is subject to review by EPA. If the website is false or
misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful
under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider
false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims
made on the website may not substantially differ from those claims approved through the registration process.
Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims
substantially differing from statements or claims made in connection with obtaining a FIFRA section 3
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.
Your release for shipment of this product constitutes acceptance of these terms. If these terms are not
complied with, this registration will be subject to cancellation in accordance with FIFRA section 6.

If you have questions, please contact Margaret Golembiewski via email at golembiewski.margaret@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor 
HB, RD
Office of Pesticide Programs
Kable Bo Davis

1 
DICAMBA GROUP 4 HERBICIDE 
CLASH 
Selective Herbicide 
For weed control in asparagus, conservation reserve programs, corn, cotton, fallow croplands, 
general farmstead (noncropland), sorghum, grass grown for seed, hay, proso millet, pasture, 
rangeland, oats, barley, wheat, triticale, soybean, sugarcane, and sod turf. 
Also for selective broadleaf weed and brush control on noncrop lands in the following uses: 
rights-of-way (including roadways, utility, railroad, highway, pipeline, and rights-of-way that run 
through pasture and rangeland), utility facilities (including substations, pipelines, tankfarms, 
pumping stations, parking and storage areas, non-irrigated ditchbanks, and fencerows), fencerows, 
natural areas (including wildlife management areas, wildlife openings, wildlife habitats, recreation 
areas, campgrounds, trailheads and trails)and forest site preparation. Also for use on established 
turf grasses (including golf courses) and lawns. 
ACTIVE INGREDIENT: 
Diglycolamine salt of 3,6-dichloro-o-anisic acid*....................................................................................................................... 56.8% 
OTHER INGREDIENTS: .............................................................................................................................................................. 43.2% 
TOTAL:…………………………………………………………………………………………………………………………………….……100% 
*Contains 38.5% 3,6-dichloro-o-anisic acid (4 pounds acid equivalent per gallon or 480 grams per liter).
SEE INSIDE BOOKLET FOR FIRST AID AND ADDITIONAL PRECAUTIONARY STATEMENTS 
For Chemical Spill, Leak, Fire, or Exposure, Call CHEMTREC (800) 424-9300 
For Medical Emergencies Only, Call (877) 325-1840 
 
 
KEEP OUT OF REACH OF CHILDREN 
CAUTION – PRECAUCION 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. 
(If you do not understand the label, find someone to explain it to you in detail.) 
EPA REG. NO. 228-615 MANUFACTURED FOR 
EPA EST. NO. NUFARM AMERICAS INC. 
150 HARVESTER DRIVE 
NET CONTENTS: BURR RIDGE, IL 60527 
000228-000615.xxxMaster 
08/21/2025
228-615

2 
PRECAUTIONARY STATEMENT 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION – PRECAUCION 
Causes moderate eye irritation. Harmful if swallowed or absorbed through skin. Avoid contact with skin, eyes or clothing. 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE): 
 
Some materials that are chemical-resistant to this product are nitrile rubber and butyl rubber. If you want more options, 
follow the instructions for Category C on an EPA chemical resistance category selection chart. 
All mixers, loaders, and applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Shoes plus socks, and 
• Chemical-resistant gloves (except for applicators using groundboom equipment, pilots and flaggers). 
 
Follow manufacturer's instructions for cleaning/maintaining PPE. If not such instructions for washables exist, use detergent and hot 
water. Keep and wash PPE separately from other laundry. 
 
See engineering controls for additional requirements. 
 
Engineering Control Statement: 
 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker 
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d) (4-6)], the handler PPE (personal protective equipment) 
requirements may be reduced or modified as specified in the WPS. Pilots must use cockpits in a manner that meets the 
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6). 
 
 
 
 
 
 
 
 
 
 
 
FIRST AID 
IF SWALLOWED ⚫ Call a poison control center or doctor immediately for treatment advice. 
⚫ Have person sip a glass of water if able to swallow. 
⚫ Do not induce vomiting unless told to do so by the poison control center or doctor. 
⚫ Do not give anything by mouth to an unconscious person. 
IF ON SKIN 
OR CLOTHING 
⚫ Take off contaminated clothing. 
⚫ Rinse skin immediately with plenty of water for 15 to 20 minutes. 
⚫ Call a poison control center or doctor for treatment advice. 
IF IN EYES ⚫ Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. 
⚫ Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. 
⚫ Call a poison control center or doctor for treatment advice. 
HOT LINE NUMBER 
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. 
You may also contact 1-877-325-1840 for emergency medical treatment information. 
 
ENVIRONMENTAL HAZARDS 
Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Do 
not contaminate water when disposing of equipment washwaters. Apply this product only as directed on the label. 
 
This chemical is known to leach through soil into ground water under certain conditions as a result of agricultural use. Use of this 
chemical in areas where soils are permeable, particularly where the water table is shallow, may result in ground water contamination. 
 
Ground and Surface Water Protection 
 
Point source contamination: To prevent point source contamination, do not mix, load this pesticide product within 50 feet of wells 
(including abandoned wells and drainage wells), sink holes, perennial or intermittent streams and rivers, and natural or impo unded 
lakes and reservoirs. Do not apply pesticide product within 50 feet of wells. This setback does not apply to properly capped or plugged 
abandoned wells and does not apply to impervious pad or properly diked mixing/loading areas as described below. 
 
Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impe rvious 
pad constructed to withstand the weight of the heaviest load that may be on or move across the pad. The pad must be self-contained 
to prevent surface water flow over or from the pad. The pad capacity must be maintained at 110% that of the largest pesticide container 
USER SAFETY RECOMMENDATIONS 
Users Should: 
⚫ Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. 
⚫ Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
⚫ Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, 
wash thoroughly and change into clean clothing.

3 
or application equipment used on the pad and have sufficient capacity to contain all product spills, equipment or container l eaks, 
equipment wash waters, and rainwater that may fall on the pad. The containment capacity does not apply to vehicles delivering 
pesticide shipments to the mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and 
operational containment. 
 
Care must be taken when using this product to prevent: a) back siphoning into wells, b) spills or c) improper dis posal of excess 
pesticide, spray mixtures or rinsates. Check valves or antisiphoning devices must be used on all mixing equipment. 
 
Movement by surface runoff or through soil : Do not apply under conditions which favor runoff. Do not apply to impervious 
substrates such as paved or highly com pacted surfaces in areas with high potential for ground water contamination. Ground water 
contamination may occur in areas where soils are permeable or coarse and ground water is near the surface. Do not apply to soils 
classified as sand with less than 3% organic matter and where ground water depth is shallow. To minimize the possibility of g round 
water contamination, carefully follow application rate instructions as affected by soil type in the Product Information section of this 
label. 
 
Movement by water erosion of treated soil : Do not apply or incorporate this product through any type of irri gation equipment nor 
by flood or furrow irrigation. Ensure treated areas have received at least one -half inch rainfall (or irrigation) before using tailwater for 
subsequent irrigation of other fields. 
 
Endangered Species Concerns: The use of any pesticide in a manner that may kill or oth erwise harm an endangered species or 
adversely modify their habitat is a violation of federal law. 
 
DIRECTIONS FOR USE 
 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protect ed handlers 
may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide 
regulation. 
 
Unless otherwise directed in supplemental labeling, all applicable directions, restrictions, precautions and Warranty Disclaimer 
and Limitation of Liability are to be followed. This labeling must be in the user's possession during application. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NON-AGRICULTURAL USE REQUIREMENTS 
 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard fo r 
Agricultural Pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, 
forests, nurseries, or greenhouses. 
Entry Restrictions for Non-WPS Uses: Do not enter or allow others to enter until the sprays have dried. 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard (WPS), 40 CFR part 170. This 
standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses and 
handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. 
It also contains specific instructions and exceptions pertaining to the statement of this label about personal protective equipment 
(PPE) and restricted-entry interval (REI). The requirements in this box only apply to users of this product that are covered by the 
WPS. 
Do not enter or allow worker entry into treated areas during the REI of 24 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contac t 
with anything that has been treated, such as plants , soil or water is: coveralls worn over short -sleeved shirt and short pants, 
chemical-resistant footwear plus socks, chemical-resistant gloves made of any waterproof material, chemical-resistant headgear 
for overhead exposure, and protective eyewear..

4 
MANDATORY SPRAY DRIFT MANAGEMENT 
Aerial Applications: 
• Do not release spray at a height greater than 10 ft above the vegetative canopy, unless a greater application height is 
necessary for pilot safety. 
• Applicators are required to use a medium or coarser droplet size (ASABE S572). 
• If the windspeed is 10 miles per hour or less, applicators must use ½ swath displacement upwind at the downwind edge of 
the field. When the windspeed is between 11 -15 miles per hour, applicators must use ¾ swath displacement upwind at the 
downwind edge of the field. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the windspeed is greater than 10 mph, the boom 
length must be 65% or less of the wingspan for fixed -wing aircraft and 75% or less of the rotor diameter for helicopters. 
Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter 
for helicopters 
• Do not apply during temperature inversions 
 
Ground Boom Applications: 
• User must only apply with the release height recommended by the manufacturer, but no more than 4 feet above the ground or 
crop canopy. 
• Applicators are required to select the nozzle and pressure that deliver a medium or coarser droplet size (ASABE S572). 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions. 
Boomless Ground Applications: 
• Applicators are required to select the nozzle and pressure that deliver a medium or coarser droplet size (ASABE S572) for a ll 
applications. 
• Do not apply when wind speeds exceed 15 miles per hour at the application site. 
• Do not apply during temperature inversions 
 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. 
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While 
applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under 
unfavorable environmental conditions. 
 
Controlling Droplet Size – Ground Boom 
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical 
spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. 
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. 
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce 
drift. 
 
Controlling Droplet Size – Aircraft 
• Adjust Nozzles – Follow nozzle manufacturers recommendations for setting up nozzles. 
• Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
 
RELEASE HEIGHT- Aircraft 
Higher release heights increase the potential for spray drift. When applying aerially to crops, do not release spray at a height greater 
than 10 ft above the crop canopy, unless a greater application height is necessary for pilot safety. 
 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields ar e not 
interfering with the uniform deposition of the spray on the target area.

5 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature wi th 
altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicate d by 
ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves 
laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapid ly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
 
Boomless Ground Applications: 
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
 
Handheld Technology Applications: 
Take precautions to minimize spray drift. 
 
PRODUCT INFORMATION 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS LABEL MAY RESULT IN POOR WEED 
CONTROL, CROP INJURY, OR ILLEGAL RESIDUES. 
 
This product is a water -soluble formulation intended for control and suppression of many annual, biennial, and perennial broadleaf 
weeds, as well as woody brush and vines listed in Table 1, General Weed List, Including ALS- and Triazine-Resistant Biotypes. 
This product may be used for control of these weeds in asparagus, corn, cot ton, conservation reserve programs, fallow cropland, 
grass grown for seed, hay, proso millet, pasture, rangeland, gen eral farmstead (noncropland), small grains, sorghum, soy bean, 
sugarcane, and turf. This product may also be used on rights -of-way (including roadways, utility, railroad, highway, pipeline, and 
rights-of-way that run through pasture and rangeland), utility facilities (including substations, pipelines, tankfarms, pumping stations, 
parking and storage areas, non-irrigated ditchbanks, and fencerows), fencerows, natural areas (including wildlife management areas, 
wildlife openings, wildlife habitats, recreation areas, campgrounds, trailheads and trails) and forest site preparation. 
 
Mode of Action: This product is readily absorbed by plants through shoot and root uptake, translocates throughout the plant's system, 
and accumulates in areas of active growth. This product inter feres with the plant's growth hormones (auxins) resulting in death of 
many broadleaf weeds. 
 
RESISTANCE-MANAGEMENT RECOMMENDATIONS 
This product has a low probability of selecting for resistant weed biotypes. 
 
For resistance management, Clash is a Group 4 herbicide. Any weed population may contain or develop plants naturally resistan t to 
Clash and other Group 4 herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly 
in the same field. Appropriate resistance-management strategies should be followed. 
 
To delay herbicide resistance take one or more of the following steps: 
 
• Rotate the use of this product or other Group 4 herbicides within a growing season sequence or among growing seasons with 
different herbicide groups that control the same weeds in a field. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in targe t weed 
species is available, use the less resistance -prone partner at a rate that will control the target weed(s) equally as well a s the more 
resistance-prone partner. Consult your local extension service or certified crop advisor if you are unsure as to which active ingredient 
is currently less prone to resistance. • Adopt an integrated weed -management program for herbicide use that includes scouting and 
uses historical information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control methods), 
cultural (e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), 
biological (weed-competitive crops or varieties) and other management practices. 
• Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of poss ible 
herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose Page 8 of 18 applied, 
especially if control is achieved on adjacent weeds; (2) a spreading patch of non -controlled plants of a particular weed species; (3) 
surviving plants mixed with controlled individuals of the same species. If resistance is suspected, prevent w eed seed production in 
the affected area by an alternative herbicide from a different group or by a mechanical method such as hoeing or tillage. Pre vent 
movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when movi ng between fields, and 
planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and swi tch to 
another management strategy or herbicide with a different mode of action, if available.

6 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance -management and/or integrated 
weed-management recommendations for specific crops and weed biotypes. 
• For further information or to report suspected resistance, contact (company representatives) at (toll-free number) or at (Internet site). 
 
Suspected herbicide-resistant weeds may be identified by these indicators: 
 
• Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved 
on adjacent weeds; 
• A spreading patch of non-controlled plants of a particular weed species; and 
• Surviving plants mixed with controlled individuals of the same species. 
 
Cleaning Spray Equipment : Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner, 
according to the manufacturer's directions, and then triple rinsing the equipment before and after applying this product.

7 
TABLE 1 
GENERAL WEED LIST 
(INCLUDING ALS– AND TRIAZINE-RESISTANT BIOTYPES) 
 
Annuals Annuals Cont. Perennials Woody Species 
Alkanet Pigweed, Prostrate, Redroot Alfalfa1 Alder 
Amaranth, Palmer, Powell, 
Spiny 
(Carelessweed), Rough, 
Smooth, Tumble 
Artichoke, Jerusalem 
Aster, Spiny, Whiteheath 
Ash 
Aspen 
Aster, Slender Pineappleweed Bedstraw, Smooth Basswood 
Bedstraw, Catchweed Poorjoe Bindweed, Field, Hedge Beech 
Beggarweed, Florida Poppy, Red-horned Blueweed, Texas Birch 
Broomweed, Common Puncturevine Bursage, Woollyleaf1 (Bur Blackberry2 
Buckwheat, Tartary, Wild Purslane, Common Ragweed, Povertyweed) Blackgum2 
Buffalobur Pusley, Florida Buttercup, Tall Cedar2 
Burclover, California Radish, Wild Campion, Bladder Cherry 
Burcucumber Ragweed, Common, Giant Chickweed, Field, Mouseear Chinquapin 
Buttercup, Corn, Creeping, 
Roughseed, Western Field 
(Buffaloweed), Lance-Leaf 
Rocket, London, Yellow 
Chicory1 
Clover1, Hop 
Cottonwood 
Creosotebush2 
Carpetweed Rubberweed, Bitter (Bitterweed) Dandelion1 Cucumbertree 
Catchfly, Nightflowering Salsify Dock1, Broadleaf (Bitterdock), Dewberry2 
Chamomile, Corn Senna, Coffee, Curly Dogwood2 
Chervil, Bur Sesbania, Hemp Dogbane, Hemp Elm add Gallberry 
Chickweed, Common Shepherdspurse Dogfennel1 (Cypressweed) Grape 
Clovers Sicklepod Fern, Bracken Hawthorn (Thornapple)2 
Cockle, Corn, Cow, White Sida, Prickly (Teaweed) Garlic, Wild Hemlock 
Cocklebur, Common Smartweed, Green, Goldenrod, Canada, Missouri Hickory 
Copperleaf, Hophornbeam Pennsylvania Goldenweed, Common Honeylocust 
Cornflower (Bachelor Button) Sneezeweed, Bitter Hawkweed Honeysuckle 
Croton, Tropic, Woolly Sowthistle, Annual, Spiny Henbane, Black1 Hornbeam 
Daisy, English Spanish Needles Horsenettle, Carolina Huckleberry 
Dragonhead, American Spikeweed, Common Ironweed add Ivy, Ground Huisache 
Eveningprimrose, Cutleaf Spurge, Prostrate, Leafy Knapweed, Black, Diffuse, Ivy, Poison 
Falseflax, Smallseed Spurry, Corn Russian1, Spotted Kudzu 
Fleabane, Annual Starbur, Bristly Milkweed, Common, Climbing Locust, Black 
Flixweed Starwort, Little Honeyvine, Western Whorled Maple 
Fumitory Sumpweed, Rough Nettle, Stinging Mesquite 
Goosefoot, Nettleleaf Sunflower, Common (Wild), Nightshade, Silverleaf (White Oak 
Hempnettle Volunteer Horsenettle) Oak, Poison 
Henbit Thistle, Russian Onion, Wild Olive, Russian 
Jacobs-Ladder Velvetleaf Plantain, Broadleaf, Buckhorn Persimmon, Eastern 
Jimsonweed Waterhemp Pokeweed Pine 
Knawel (German Moss) Waterprimrose, Winged Ragweed, Western Plum, Sand (Wild Plum)2 
Knotweed, Prostrate Wormwood Redvine Poplar 
Kochia Sericea Lespedeza Rabbitbrush 
Ladysthumb Biennials Smartweed, Swamp Redcedar, Eastern2 
Lambsquarters, Common Burdock, Common Snakeweed, Broom Rose', McCartney, Multiflora 
Lettuce, Miners, Prickly Carrot, Wild (Queen Anne's Sorrel1, Red (Sheep Sorrel) Sagebrush, Fringed2 
Mallow, Common, Venice Lace) Sowthistle1, Perennial Sassafras 
Marestail (Horseweed) Cockle, White Spurge, Leafy Serviceberry 
Mayweed Add Medic, black Eveningprimrose, Common Sundrop, Halfshrub Eveningprimrose Spicebush 
Morningglory, Ivyleaf, Tall Geranium, Carolina Thistle, Canada, Scotch Spruce 
Mustard, Black, Blue, Tansy, Gromwell Toadflax, Dalmatian Sumac 
Treacle, Tumble, Wild, 
Yellowtops 
Knapweed, Diffuse, Spotted 
Mallow, Dwarf 
Tropical Soda Apple 
Trumpetcreeper (Buckvine) 
Sweetgum2 
Sycamore 
Nightshade, Black, Cutleaf, Plantain, Bracted Vetch add Violet, Wild Tarbush Add Wax Myrtle 
Pennycress, Field (Fanweed, 
Frenchweed, Stinkweed) 
Ragwort, Tansy 
Starthistle, Yellow 
Waterhemlock, Spotted 
Waterprimrose, Creeping 
Willow 
Witchhazel 
Pepperweed, Virginia Sweetclover Woodsorrel1, Creeping, Yellow Yaupon2 
(Peppergrass) Teasel Wormwood, Louisiana, Common Yucca2 
 Thistle, Bull, Milk, Musk, 
Plumeless 
Yankeeweed 
Yarrow, Common1 
1 Noted perennials may be controlled using lower rates of this product than those specified for other listed perennial weeds. 
2 Growth suppression only.

8 
APPLICATION INSTRUCTIONS 
 
This product can be applied to actively growing weeds as aerial, broadcast, band, or spot spray applications using water or sprayable 
fertilizer as a carrier. For product application rates for control or suppression by weed type and growth stage, see Table 2, PRODUCT 
APPLICATION RATES FOR CONTROL OR SUPPRESSION BY WEED TYPE AND GROWTH STAGE. For crop-specific application 
timing and other details, refer to the CROP-SPECIFIC INFORMATION section. 
 
To avoid uneven spray coverage, this product should not be applied during periods of gusty wind or when wind is in excess of 15 
mph. 
 
Avoid off-target movement. Use extreme care when applying this product to prevent injury to desirable plants and shrubs. 
 
Cultivation: Do not cultivate within 7 days after applying this product. 
 
Sensitive Crop Precautions: This product may cause injury to desirable trees and plants, particularly beans, cotton, flowers, fruit 
trees, grapes, ornamentals, peas, potatoes, soybeans, sunflowers, tobacco, tomatoes, and other broadleaf plants when con tacting 
their roots, stems, or foliage. These plants are most sensitive to this product during their development or growing stage. 
 
Recommendations to Avoid Herbicide Drift 
 
• Use coarse sprays (volume median diameter of 400 microns or more) to avoid potential herbicide drift. Select nozzles that 
are designed to produce minimal amounts of fine spray particles (less than 200 microns). Examples of nozzles designed to 
produce coarse sprays via ground applications are Delavan® Raindrops, Spraying Systems XR (excluding 110° tips) flat 
fans, Turbo Teejets®, Turbo Floodjets®, or large capacity flood nozzles such as D10, TK10, or greater capacity tips. 
 
• Keep the spray pressure at or below 20 psi and the spray volume at or above 20 gallons per acre (for ground broadcast 
applications), unless otherwise required by the manufacturer of drift-reducing nozzles. Consult your spray nozzle supplier 
concerning the choice of drift-reducing nozzles. 
 
• Agriculturally approved drift-reducing additives may be used. 
 
Aerial Application Methods and Equipment 
 
Water Volume: Use 1 - 10 gallons of water per acre (2 - 20 gallons of diluted spray per treated acre for preharvest uses). Use the 
higher spray volume when treating dense or tall vegetation. 
 
Application Equipment: Select nozzles designed to pro duce minimal amounts of fine spray particles. Make aerial applications at 
the lowest safe height to reduce exposing the spray to evaporation and wind. 
 
The applicator must follow the most restrictive use cautions to avoid drift hazards, including those found in this labeling, as well as 
state and local regulations and ordinances. 
 
Do not use aerial equipment if spray particles can be carried by the wind into areas where sensitive crops or plants are growing or 
when temperature inversions exist. 
 
Ground Application (Banding) 
 
When applying this product by banding, determine the amount of herbicide and water volume needed using the following formula: 
 
Bandwidth in inches x Broadcast rate per acre = Banding herbicide rate per acre 
Row width in inches 
 
Bandwidth in inches x Broadcast volume per acre = Banding water volume per acre 
Row width in inches 
 
Ground Application (Broadcast) 
 
Water Volume: Use 3 - 50 gallons of spray solution per broadcast acre for optimal performance. Use the higher spray volume when 
treating dense or tall vegetation. 
 
Application Equipment: Select nozzles designed to pro duce minimal amounts of fine spray particles. Spray with nozzles as 
close to the weeds as is practical for good weed coverage. 
 
Ground Application (Wipers) : This product may be applied through wiper applica tion equipment to control or suppress actively 
growing broadleaf weeds, brush, and vines. Use a solution contain ing 1 part of this product to 1 part water. Do not contact desirable 
vegetation with herbicide solution. Wiper application may be made to crops (including pastures) and non-cropland areas described in 
this label with the exception of cotton, sorghum, and soybean.

9 
SPRAY EQUIPMENT 
Procedure for Cleaning Spray Equipment 
The steps listed below are suggested for thorough cleaning of spray equipment following applications of this product. 
1. Hose down thoroughly the inside as well as outside surfaces of equipment while filling the spray tank half full of water. Flu sh by 
operating sprayer until the system is purged of the rinse water. 
2. Fill tank with water while adding 1 quart of household ammonia for every 25 gals of water. Operate the pump to circulate the 
ammonia solution th rough the sprayer system for 15 to 20 minutes and discharge a small amount of the ammonia solution 
through the boom and nozzles. Let the solution stand for several hours, preferably overnight. 
3. Flush the solution out of the spray tank through the boom. 
4. Remove the nozzles and screens and flush the system with two full tanks of water. The steps listed below are suggested for 
thorough cleaning of spray equipment used to apply this product as a tank mix with wettable powders (WP), emulsifiable 
concentrates (EC), or other types of water-dispersible formulations. This product tank mixes with water-dispersible formulations 
require the use of a water/detergent rinse. 
5. Complete step 1. 
6. Fill tank with water while adding 2 lbs. of detergent for every 40 gals. of water. Operate the pump to circulate the detergent solution 
through the sprayer system for 5 to 10 minutes and discharge a small amount of the solution through the boom and nozzles. Let the 
solution stand for several hours, preferably overnight. 
7. Flush the detergent solution out of the spray tank through the boom. 
8. Repeat step 1, and follow with steps 2, 3, and 4. 
 
TABLE 2 
PRODUCT APPLICATION RATES FOR CONTROL OR SUPPRESSION 
BY WEED TYPE AND GROWTH STAGE 
 
Use rate limitations are given in the CROP-SPECIFIC INFORMATION section. 
 
Weed Type and Stage Rate Per Acre (fl. oz.) Weed Type and Stage Rate Per Acre (fl. oz.) 
 Annual1 
Small, actively growing 
Established weed growth 
 
 8 - 16 
 16 - 24 
Perennial 
Top growth suppression 
Top growth control and root suppression 
Noted perennials (Footnote 1 in Table 1) 
Other perennials3 
 
 8 - 16 
 16 - 32 
 32 
 32 
Biennial 
Rosette diameter 1 - 3" 
Rosette diameter 3" or more 
Bolting 
 
 8 - 16 
 16 - 32 
 32 
Woody Brush & Vines 
Top growth suppression 
Top growth control 2, 3 
Stems and stem suppression3 
 
 16 - 32 
 32 
 32 
 
1 Rates below 8 fluid ounces per acre may provide control or suppression but should typically be applied with other herbicides that 
are effective on the same species and biotype. 
2 Species noted in Table 2 will require tank mixes for adequate control. 
3 Do not broadcast apply more than 32 fluid ounces (1 lb. ae Dicamba) per acre per application. Do not apply more than 64 fluid 
ounces (2 lbs ae Dicamba) per acre per year. Use the higher level of listed rate ranges when treating dense vegetative growth 
or perennial weeds with well established root growth. 
 
ADDITIVES 
To improve postemergence weed control, agriculturally approved surfactants, sprayable fertilizers (urea ammonium nitrate, or 
ammonium sulfate), or crop oil concentrate may be added, particularly in dry growing conditions. (Refer to Table 3, Additive Rate Per 
Acre.) 
 
Nitrogen Source 
 
• Urea ammonium nitrate (UAN): Use 2 - 4 quarts of UAN (commonly referred to as 28%, 30%, or 3 2% nitrogen solution) 
per acre. Do not use brass or aluminum nozzles when spraying UAN. 
• Ammonium sulfate (AMS): AMS at 2.5 pounds per acre may be substituted for UAN. Use high -quality AMS (spray grade) 
to avoid plugging of nozzles. Other sources of nitrogen are not as effective as those men tioned. Nufarm Americas Inc. does 
not recommend applying AMS, if applied in less than 10 gallons per acre because of potential problems with precipitation in 
reduced volumes. Use AMS only if it has been demonstrated to be successful in local experience. 
 
Nonionic Surfactant: The standard label instructions are 1 pint of an 80% active nonionic spray surfactant per 100 gallons of water. 
For certain weeds, a higher spray surfactant rate is advised. 
 
Oil Concentrate: A crop oil concentrate must contain either a petroleum or vegetable oil base and must meet all of the following 
criteria: 
 
• be nonphytotoxic, 
• contain only EPA-exempt ingredients, 
• provide good mixing quality in the jar test, and 
• be successful in local experience.

10 
The exact composition of suitable products will vary; however, vegetable and petroleum oil concentrates should contain emulsifiers to 
provide good mixing quality. Highly refined vegetable oils have proven more satisfactory than unrefined vegetable oils. For additional 
information, see COMPATIBILITY TEST FOR MIX COMPONENTS. 
 
Adjuvants containing crop oil concentrates may be used in preplant, preemergence, and preharvest application, as well as in pastures 
and noncropland. Do not use crop oil concentrate for postemergence in -crop applications unless specifically allowed in the CROP-
SPECIFIC INFORMATION section of this label. 
TABLE 3 
ADDITIVE RATE PER ACRE 
 
Additive Rate Per Acre 
Nonionic Surfactant 1 - 2 pints per 100 gallons 
AMS 
UAN Solution 
Crop Oil Concentrate 
 2.5 pounds 
 2 - 4 quarts 
 1 quart* 
*See manufacturer's label for specific rate instructions 
COMPATIBILITY TEST FOR MIX COMPONENTS 
 
Before mixing components, always perform a compatibility jar test. 
 
For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes, adjust accordingly. Only use water 
from the intended source at the source temperature. 
 
Add components in the sequence indicated in the MIXING ORDER using 2 teaspoons for each pound or 1 teaspoon for each pint of 
label rate per acre. 
 
Always cap the jar and invert 10 cycles between component additions. 
 
Before full-scale mixing of this product with other pesticides, fertilizers, secondary plant nutrients, adjuvants, surfactants or oils, y ou 
must determine the compatibility of the proposed mixture. Use proportionate quantities of each ingredient and mix in a small container. 
Always mix one product thoroughly with the diluent before adding another product. If no incompatibility is evident after 30 m inutes, 
the mixture is generally compatible for spraying. To evaluate potential short term effects of applying the mixture, test the tank mix 
combination on a few plants or a small area before larger-scale treatments. Wait at least 2 to 3 days for problems to become apparent. 
IMPORTANT: MIXING WITH OTHER SUBSTANCES MAY INCREASE THE RISK OF MIXING INCOMPATIBILITIES, REDUCED 
EFFECTIVENESS AND/OR CAUSE CROP INJURY OR LOSS. ANY LIABILITY FOR LOSS, INJURY OR DAMAGE RESULTING 
FROM A MIXTURE NOT SPECIFIED ON THIS LABEL OR IN MANUFACTU RER’S SUPPLEMENTAL LABELING DISTRIBUTED 
FOR THIS PRODUCT IS SPECIFICALLY DISCLAIMED BY MANUFACTURER. 
 
MIXING ORDER 
 
1. Water. Begin by agitating a thoroughly clean sprayer tank three-quarters full of clean water. 
2. Agitation. Maintain constant agitation throughout mixing and application. 
3. Inductor. If an inductor is used, rinse it thoroughly after each component has been added. 
4. Products in PVA bags. Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all water -
soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing. 
5. Water-dispersible products (dry flowables, wettable powders, suspension concentrates, or suspoemulsions). 
6. Water-soluble products (such as this product). 
7. Emulsifiable concentrates (such as oil concentrate when applicable). 
8. Water-soluble additives (such as AMS or UAN when applicable). 
9. Remaining quantity of water. 
 
Maintain constant agitation during application. 
 
PRODUCT TANK MIXING INFORMATION 
It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow th e applicable 
restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture. 
 
TANK MIXES 
Unless otherwise prohibited on this label or the label of an intended tank mix product, this product may be applied in combination with 
any pesticide registered for the same crop, timing, and method of application. Observe the most restrictive label statements of various 
tank mix products used. 
IMPORTANT: PESTICIDE TANK MIXES MAY INCREASE THE RISK OF MIXING INCOMPATIBILITIES, REDUCED 
EFFECTIVENESS AND/OR CAUSE CROP INJURY OR LOSS. ANY LIABILITY FOR LOSS, INJURY OR DAMAGE RESULTING 
FROM A TANK MIXTURE NOT SPECIFIED ON THIS LABEL OR IN MANUFACTURER ’S SUPPLEMENTAL LABELING 
DISTRIBUTED FOR THIS PRODUCT IS SPECIFICALLY DISCLAIMED BY MANUFACTURER.

11 
See CROP-SPECIFIC INFORMATION section for more details. Read and follow the applicable RESTRICTIONS AND 
LIMITATIONS and DIRCTIONS FOR USE on all products involved in tank mixing. The most restrictive labeling applies to tank 
mixes. 
 
This product may also be used in tank mixtures with foliar applied insecticides including synthetic pyrethroids insecticides. Do not 
apply this product in tank mixtures with chlopyrifos . 
 
Physical incompatibility, reduced weed control, or crop injury may result from mixing this product with other pesticides (fungicides, 
herbicides, insecticides, or miticides), additives, or fertilizers. Nufarm Americas Inc. does not recommend using tank mixes other 
than those listed on Nufarm Americas Inc. labeling. Local agricultural authorities may be a source of information when using other 
than Nufarm Americas Inc. recommended tank mixes. 
 
RESTRICTIONS AND LIMITATIONS 
 
Maximum yearly use rate: Refer to Table 4, Crop-Specific Restrictions and Limitations for crop-specific maximum yearly use 
rates. Do not exceed 64 fluid ounces of this product (2 pounds acid equivalent) per acre, per year. 
 
Preharvest Interval (PHI): Refer to the CROP-SPECIFIC INFORMATION section for preharvest intervals. 
 
Restricted-Entry Interval (REI): 24 hours 
 
Crop Rotational Restrictions: The interval between application and planting rotational crop is given below. Always exclude counting 
days when the ground is frozen. Planting at intervals less than specified below may result in crop injury. Moisture is essential for the 
degradation of this herbicide in soil. If dry weather prevails, use cultivation to allow herbicide contact with moist soil. 
 
Planting/replanting restrictions for this product’s applications of 24 fluid ounces per acre or less: No rotational cropping 
restrictions apply at 120 days or more following application. Additionally, for annual crop uses in this label including corn, cotton, 
sorghum, and soybean, follow the preplant use directions in the CROP-SPECIFIC INFORMATION section. For barley, oat, 
wheat, and other grass seedings, the interval between application and planting is 15 days per 8 fluid ounces per acre applied 
east of the Mississippi River 
and 22 days per 8 fluid ounces per acre west of the Mississippi River. 
 
Planting/replanting restrictions for applications of more than 24 fluid ounces and up to 64 fluid ounces of this product 
per acre: Corn, sorghum, cotton (east of the Rocky Mountains) and all other crops grown in areas with 30" or more of annual 
rainfall may be planted 120 days or more after application. Barley, oat, wheat, and other grass seedings, may be planted if t he 
interval from application to planting is 30 days per 16 fluid ounces per acre east of the Mississippi River and 45 days per 16 fluid 
ounces per acre west of the Mississippi River. For all other crops in areas with less than 30" of annual rainfall, the interval 
between application and planting is 180 days or more. 
 
Rainfast period: Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce the effectiveness of this 
product. 
 
Stress: Do not apply to crops under stress due to lack of moisture, hail damage, flooding, herbicide injury, mechanical injury, insects, 
or widely fluctuating temperatures as injury may result. 
Do not apply through any type of irrigation equipment. Do not treat irrigation ditches or water used for crop irrigation or domestic 
purposes.

12 
TABLE 4 
CROP-SPECIFIC RESTRICTIONS 
Crop 
Maximum Rate Per 
Acre Per Application 
fl. oz. (lbs a.e.) 
Maximum In-Crop Rate 
Per Acre Per Year 
fl. oz. (lbs. a.e.) 
Livestock 
Grazing or 
Feeding 
Aircraft 
Application 
Allowed 
Asparagus 16 (0.5) 16 (0.5) Yes Yes 
Barley: Fall 
 Spring 
8 (0.25) 
8 (0.25) 
12 (0.375) 
11 (0.344) 
Yes Yes 
Corn 16 (0.5) 24 (0.75) Yes2 Yes 
Cotton 8 (0.25) 8 (0.25) Yes Yes 
Fallow Ground 32 (1) 32 (1) Yes Yes 
Grass grown for seed 32 (1) 64 (2) Yes Yes 
Proso Millet 4 (0.125) 4 (0.125) Yes Yes 
Pastureland 32 (1) 32 (1) Yes Yes 
Conservation Reserve 
Program (CRP) 32 (1) 64 (2) Yes Yes 
Oats 4 (0.125) 4 (0.125) Yes Yes 
Sorghum 8 (0.25) 16 (0.5) Yes Yes 
Soybean 32 (1) 64 (2) Yes Yes 
Sugarcane 32 (1) 64 (2) Yes Yes 
Turf 32 (1) 32 (1) Yes Yes 
Triticale 4 (0.125) 4 (0.125) Yes Yes 
Wheat 8 (0.25) 16 (0.5) Yes Yes 
1. Refer to the CROP-SPECIFIC INFORMATION section for more details. 
2. Once the crop reaches the ensilage (milk) stage or later in maturity.

13 
CROP-SPECIFIC DIRECTIONS 
ASPARAGUS 
 
Apply this product to emerged and actively growing weeds in 40 - 60 gallons of diluted spray per treated acre immediately after cutting 
the field, but at least 24 hours before the next cutting. 
 
If spray contacts emerged spears, crooking (twisting) of some spears may result. If such crooking occurs, discard affected spears. 
 
Asparagus Rates: Apply 8 - 16 fluid ounces of this product to control annual sowthistle, black mustard, Canada and Russian 
thistle, and redroot pigweed, (carelessweed). 
 
Apply 16 fluid ounces of this product to control common chickweed, field bindweed, nettleleaf goosefoot, and wild radish. 
 
Asparagus Tank Mixes 
Apply 8 - 16 fluid ounces of this product with glyphosate or 2,4-D to improve control of Canada thistle and field bindweed. 
 
Asparagus Use Restrictions 
• Maximum Single Application Rate: DO NOT exceed a total of 16 fluid ounces (0.50 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 16 fluid ounces (0.50 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: Up to 2 (application rate dependent). 
• Retreatment Interval: 14 days 
• Preharvest Interval (PHI): 24 hours 
• DO NOT use in the Coachella Valley of California 
 
Between Crop Applications 
 
Preplant Directions (Postharvest, Fallow, Crop Stubble, Set -Aside) For Broadleaf Weed Control: This product can be applied 
either postharvest in the fall, spring, or summer during the fallow period or to crop stubble/set -aside acres. Apply this product as a 
broadcast or spot treatment to emerged and actively growing weeds after crop harvest (postharvest) and before a killing frost or in the 
fallow cropland or crop stubble the following spring or summer. 
 
See Crop-Rotational Restrictions in the RESTRICTIONS AND LIMITATIONS section for the specified interval between application 
and planting to prevent crop injury. 
 
Rates and Timings: Apply 4 - 32 fluid ounces of this product per acre. Refer to Table 2 to determine use rates for specific targeted 
weed species. For best performance, apply this product when annual weeds are less than 6" tall, when biennial weeds are in the 
rosette stage and to perennial weed regrowth in late summer or fall following a mowing or tillage treatment. The most effective control 
of upright perennial broadleaf weeds such as Ca nada thistle and Jerusalem artichoke occurs if this product is applied when the 
majority of weeds have at least 4” - 6" of regrowth or for weeds such as field bindweed and hedge bindweed that are in or beyond the 
full bloom stage. 
 
Avoid disturbing treated areas following application. Treatments may not kill weeds that develop from seed or underground plant parts 
such as rhizomes or bulblets, after the effective period for this product. For seedling control, a follow -up program or other cultural 
practices could be instituted. For small grain in-crop uses of this product, refer to the small grain section for details. 
 
Between Crop Tank Mixes 
Apply 4 - 16 fluid ounces of this product per acre for control of annual weeds, or 16 - 32 fluid ounces of this product per acre for control 
of biennial and perennial weeds in a tank -mixture with products containing one or more of the following herbicidal active ingredients: 
2,4-D, atrazine, chlorsulfuron, metsulfuron -methyl, clopyralid, glyphosate, metribuzin, paraquat, picloram, pronamide, quinclorac, 
triasulfuron. 
 
CORN (FIELD, POP, SEED, AND SILAGE) 
Preplant and Preemergence Application in No Tillage Corn 
 
Rates: Apply 16 fluid ounces of this product per acre on medium- or fine-textured soils containing 2.5% or greater organic matter. Use 
8 fluid ounces of this product per acre on coarse soils (sand, loamy san d, and sandy loam) or medi um- and fine-textured soils with 
less than 2.5% organic matter. 
 
Timing: This product can be applied to emerged weeds before, during, or after planting a corn crop. When planting into a legume 
sod (e.g. alfalfa or clover), apply this product after 4” - 6" of regrowth has occurred. 
 
Preemergence Application In Conventional Or Reduced Tillage Corn 
 
Rates: Apply 16 fluid ounces of this product per treated acre to medium - or fine-textured soils that contain 2.5% organ ic matter or 
more. Do not apply to coarse-textured soils (sand, loamy sand, or sandy loam) or any soil with less than 2.5% organic matter until 
after corn emergence (see Early Postemergence uses below). 
 
Timing: This product may be applied after planting and prior to corn emergence. Preemergence application of this product does not 
require mechanical incorporation to become active. A shallow mechanical incorporation is recommend ed if the application is not 
followed by adequate rainfall or sprinkler irrigation. Avoid tillage equipment (e.g. drags, har rows) that concentrate treated soil over 
seed furrow, as seed damage could result.

14 
Preemergence control of cocklebur, jimsonweed, and velvetleaf may be reduced if conditions such as low temperature or lack of soil 
moisture cause delayed or deep germination of weeds. 
 
Early Postemergence Application in All Tillage Systems 
 
Rates: Apply 16 fluid ounces of this product per treated acre. Reduce the rate to 8 fluid ounces of this product per treated acre for 
corn grown on coarse-textured soils (sand, loamy sand, and sandy loam). 
 
Timing: Apply between corn emergence and the 5 -leaf stage or 8" tall, whichever occurs first. Refer to Late Postemergence 
Application if the sixth true leaf is emerging from whorl or the corn is greater than 8" tall. 
 
Late Postemergence Application 
 
Rate: Apply 8 fluid ounces of this product per treated acre. 
 
Timing: Apply this product from 8 - 36" tall corn or 15 days before tassel emergence, whichever comes first. For best performance, 
apply when weeds are less than 3" tall. 
 
Apply directed spray when corn leaves prevent proper spray coverage, sensitive crops are growing nearby, or tank mixing with 2 ,4-
D. Do not apply this product when soybeans are growing nearby if any of these conditions exist: 
 
• Corn is more than 24" tall 
• Soybean are more than 10" tall 
• Soybean have begun to bloom 
 
Corn Tank Mixes or Sequential Uses 
When using tank mix or sequential applications with this product, always follow the companion product label to determine specific use 
rates by soil types, weed species, and weed or crop growth stage. In addition, follow precau tions and restrictions including state and 
local use restrictions that may apply to specific products. 
 
Apply this product prior to, in tank mix with, or after one or more of the following herbicide active ingredients: 2,4-D2, acetochlor, 
atrazine, alachlor, bentazon, clopyralid, dicamba3, dimethenamid-P, flufenacet, flumetsulam, glufosinate (only on glufosinate-
tolerant corn hybrids), glyphosate (only on glyphosate tolerant corn hybrids), halosulfuron, imazethapyr plus imazapyr (only on 
imidazolinone tolerant corn hybrids), metolachlor, metribuzin, nicosulfuron1, paraquat, pendimethalin, primisulfuron-methyl1, 
prosulfuron, simazine, s-metolachlor. 
 
1When tank -mixing, applications immediately following extreme day or night temperature fluctuations, or when daytime 
temperatures are below 50°F, may result in decreased weed control or crop injury. Delay application until temperature warms 
and plants resume normal growth. 
 
2To provide maximum crop safety after corn emergence, use this tank mix only after corn is greater than 8 inches tall, when 
application can be made with drop pipes that direct spray beneath corn leaves and away from the corn’s whorl. The maximum 
rate of 2,4-D recommended in tank mix is 0.125 lbs. ae per acre. 
 
3Tank mixes containing dicamba must not exceed a combined rate of 0.5 lbs. a.e. dicamba per acre (0.25 lbs. a.e. on coarse-
textured soils or when corn is >8 inches tall). Sequential applications of these products must be separated by a minimum of 2 
weeks, unless the combined rate is <0.5 lbs. of dicamba a.e. and corn is ≤8 inches. Sequential uses must not exceed a combined 
total of 0.75lbs. dicamba a.e. per acre for in-crop use. 
 
Corn Use Precautions 
• Avoid direct contact of this product with corn seed. Delay application of this product if corn seeds are less than 1.5 inches 
below the soil surface until corn has emerged. 
• Applications to corn during periods of rapid growth may result in temporary leaning. Corn will usually become erect within 
3 to 7 days. To avoid breakage, delay cultivation until after corn is growing normally. 
• Avoid using crop oil concentrates after crop emerges as crop injury may result. Use crop oil concentrates only in dry 
conditions when corn is less than 5 inches tall and when applying this product alone or in tank-mixture with atrazine. 
• Use of sprayable fluid fertilizer as the carrier is not recommended for applications made after corn emergence. 
 
Corn Use Restrictions 
• DO NOT apply sweet corn. This product is not registered for use on sweet corn. 
• Do not apply this product to seed corn or popcorn without first verifying with your local seed corn company (supplier) the 
selectivity of this product on your inbred line or variety of popcorn. This precaution will help avoid potential injury of sensitive 
varieties. 
• Maximum Single Application Rate: DO NOT exceed the rates specified for the application timing and soil type. 
• Maximum Annual Application Rate: DO NOT exceed a total of 24 fluid ounces (0.75 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications: Up to 2 (application rate dependent). 
• Minimum Retreatment Interval: 14 days 
• Preharvest (PHI)/Grazing Interval: Corn may be harvested or grazed for feed once the crop has reached the ensilage 
(milk) stage or later in maturity.

15 
COTTON 
 
Preplant Application: Apply up to 8 fluid ounces of this product per acre to control emerged broadleaf weeds prior to planting 
cotton in conventional or conservation tillage systems. 
 
For best performance, apply this product when weeds are in the 2 - 4 leaf stage and rosettes are less than 2" across. 
 
Following application of this product and a minimum accumulation of 1" of rainfall or overhead irrigation, a waiting interval of 21 days 
is required per 8 fluid ounces per acre or less. These intervals must be observed prior to planting cotton. 
 
Cotton Tank Mixes 
For control of grasses or additional broadleaf weeds, this product may be tank mixed with glyphosate, paraquat, or prometryn. 
 
Cotton Use Restrictions 
 
• Maximum Single Application Rate: DO NOT exceed a total of 8 fluid ounces (0.25 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 8 fluid ounces (0.25 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: Up to 2 (application rate dependent). 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): N/A 
• DO NOT apply preplant to cotton west of the Rocky Mountains. 
• DO NOT make preplant applications to cotton in geographic areas with average annual rainfall less than 25 inches. 
• If applying a spring preplant treatment following application of a fall preplant (postharvest) treatment, then the combinatio n 
of both treatments may not exceed 64 fluid ounces per acre. 
 
GRASS GROWN FOR SEED 
 
Apply 8 - 16 fluid ounces of this product per treated acre on seedling grass after the crop reaches the 3 - 5 leaf stage. Apply up to 32 
fluid ounces of this product on well-established perennial grass. For best performance, apply this product when weeds are in the 2 - 
4 leaf stage and rosettes are less than 2" across. Use the higher level of listed rate ranges when treating more mature weeds or dense 
vegetative growth. 
 
To suppress annual grasses such as brome (downy and ripgut), rattail fescue, and windgrass, apply up to 32 fluid ounces of this 
product per treated acre in the fall or late summer after harvest and burning of established grass seed crops. Applications should be 
made immediately following the first irrigation when the soil is moist and before weeds have more than 2 leaves. 
 
Grass Seed Tank Mixes 
This product may be applied in tank mixes with one or more of the following herbicide active ingredients 2,4-D amine or ester, 
bromoxynil, clopyralid, MCPA amine, diuron, clopyralid, metribuzin, tribenuron. 
 
Grass Grown for Seed Use Restrictions 
• Maximum Single Application Rate: DO NOT exceed a total of 32 fluid ounces (1.0 lbs. a.e.) per application for established 
grass or 16 fluid ounces (0.5 lbs. a.e.) per application for seedling grass. 
• Maximum Annual Application Rate: DO NOT exceed a total of 64 fluid ounces (2.0 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): N/A 
• Refer to TABLE 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for 
restrictions pertinent to grass seed areas that are grazed or cut for hay. 
• DO NOT apply this product after the grass seed crop begins to joint. 
 
PROSO MILLET 
 
For use only within Colorado, Nebraska, North Dakota, South Dakota, and Wyoming. 
 
This product combined with 2,4-D will provide control or suppression of the annual broadleaf weeds listed in Table 1. 
 
Apply 4 ounces of this product with 0.375 lbs. a.e. of 2,4-D. Apply the tank mix of this product + 2,4-D as a broadcast or spot treatment 
to emerged and actively growing weeds and when proso millet is in the 2 - 5 leaf stage. Use direc tions for 2,4-D products vary with 
manufacturers. Refer to a 2,4-D product with labeling consistent with the crop stage timing for this product. Some types of proso millet 
may be affected adversely by a tank mix of this product + 2,4-D.

16 
Proso Millet Use Restrictions 
 
• Maximum Single Application Rate: DO NOT exceed a total of 4 fluid ounces (0.125 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed 4 fluid ounces (0.125 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 1 
• Minimum Retreatment Interval: N/A 
• Preharvest Interval (PHI): N/A 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for 
restrictions pertinent to proso millet areas that are grazed or cut for hay. 
• DO NOT apply unless possible proso millet crop injury will be acceptable. 
 
SMALL GRAINS NOT UNDERSEEDED TO LEGUMES (Fall- and Spring-Seeded Barley, Oat, Triticale and 
Wheat) 
 
Combinations with listed tank mix partners will pro vide control or suppression of the annual broadleaf weeds listed in Table 1. For 
improved control of listed weeds, tank mix this product with one or more of the herbicides listed. This product used in a tank mix with 
other herbicides offers the best spectrum of weed control and herbicide tolerant or resistant weed management. Refer to the s pecific 
crop section for this product’s application rate and timing. 
 
For applications prior to weed emergence or when sul fonylurea-resistant weeds are present or suspected, tank mix a minimum of 3 
fluid ounces of this product per treated acre with a non-sulfonylurea herbicide such as 2,4-D or MCPA. Tank mixing this product with 
these products will offer more consistent control of sulfonylurea-resistant weeds. 
 
Additives: When tank mixing this product with sulfonylurea herbicides ( metsulfuron, triasulfuron, tribenuron, thifensulfuron , 
prosulfuron), use 1 - 4 pints of an agriculturally approved surfactant (containing at least 80% active ingredient) per 100 gallons of 
spray or not more than 0.25 - 0.5% by volume. Use the highest rate of sur factant when using the lower rate ranges of the tank mix 
or when treating more mature and difficult to control weeds or dense vegetative growth. 
 
Refer to the specific crop sections below for use rates. When treating difficult to control weeds such as kochia, wild buckwh eat, cow 
cockle, prostrate knotweed, Russian thistle, and prickly lettuce or when dense vegetative growth occurs, use the 3 - 4 fluid ounces of 
this product per acre. 
 
Timings: Apply this product before, during, or after planting small grains. See specific small grain crop uses below for maximum crop 
stage. For best performance, apply this product when weeds are in the 2 - 3 leaf stage and rosettes are less than 2" across. Applying 
this product to small grains during periods of rapid growth may result in crop leaning. This condition is temporary and will not reduce 
crop yields. 
 
Applications to small grains may be made with aerial appli cations with 1 gallon of water or more per acre. Where dense foliage is 
present, 2 - 3 gallons of water per acre should be used. 
 
Restrictions for small grain areas that are grazed or cut for hay are indicated in Table 8 in the PASTURE, HAY, RANGELAND, AND 
GENERAL FARMSTEAD section of this label. 
 
SMALL GRAINS: BARLEY (Fall- and Spring-Seeded) 
 
Early Season Applications: Apply 2 - 4 fluid ounces of this product to fall-seeded barley prior to the jointing stage. Apply 2 - 3 fluid 
ounces of this product before spring-seeded barley exceeds the 4-leaf stage. 
 
Note: For spring barley varieties that are seeded during the winter months or later, follow the rates and timings given for spring -
seeded barley. 
Do not tank mix this product with 2,4-D in early season applications on spring-seeded barley. 
Preharvest Applications: This product can be used to control weeds that may interfere with harvest of fall - and spring-seeded 
barley. Apply 8 fluid ounces of this product per acre as a broadcast or spot treatment to annual broadleaf weeds when barley is in the 
hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if applica tion can be 
made when weeds are actively growing, but before weeds canopy. 
For control of additional broadleaf weeds or grasses, this product may be tank mixed with other herbicides, such as 2,4-D, that are 
labeled for preharvest uses in barley. 
 
Barley Tank Mixes 
 
This product may be applied in tank mixes with products containing the following herbicide active ingredients: 2,4 -D Amine or 2,4-D 
Ester2, Bromoxynil, Chlorsulfuron1, MCPA amine or MCPA ester, metribuzin, metsulfuron-methyl1, thifensulfuron1, tribenuron-
methyl1, triasulfuron1 
 
1DO NOT use low rates of Sulfonylureas on mature weeds or on dense vegetative growth. 
2Use in tank-mix for fall-seeded barley only.

17 
Barley Use Restrictions 
• Maximum Single Application Rate: DO NOT exceed the rates specified in the use instruction for the application timing. 
• Maximum Annual Application Rate: 
o Fall-Seeded: DO NOT exceed a total of 12 fluid ounces (0.375 lbs. a.e.) per acre p crop year. 
o Spring-Seeded: DO NOT exceed a total of 11 fluid ounces (0.344 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): 7 days 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for 
restrictions pertinent to small grain areas that are grazed or cut for hay. 
• DO NOT use preharvest treated barley for seed unless a germination test is performed on the seed with an acceptable 
result of 95% germination or better. 
• DO NOT tank-mix this product with 2,4-D in early season applications on spring-seeded barley. 
• DO NOT make preharvest applications in California. 
 
SMALL GRAINS: OAT (Fall- and Spring-Seeded) 
 
Early Season Applications: Apply 2 - 4 fluid ounces of this product per acre to fall-seeded oat prior to the jointing stage. Apply 2 - 
4 fluid ounces of this product before spring-seeded oat exceeds the 5-leaf stage. 
 
This product may be tank mixed with MCPA amine or ester for applications in oat. 
 
Oat Use Restrictions 
 
• Maximum Single Application Rate: DO NOT exceed a total of 4 fluid ounces (0.125 lbs. a.e.) per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 4 fluid ounces (0.125 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 1 
• Minimum Retreatment Interval: N/A 
• Preharvest Interval (PHI) grain: 7 days 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for restrictions 
pertinent to small grain areas that are grazed or cut for hay. 
• DO NOT tank mix this product with 2,4-D on oats. 
 
SMALL GRAINS: TRITICALE (Fall- and Spring-Seeded) 
 
Early Season Applications: Apply 2 - 4 fluid ounces of this product to triticale. Early season applications to fall-seeded triticale must 
be made prior to the jointing stage. 
 
Early season applications to spring-seeded triticale must be made before triticale reaches the 6-leaf stage. 
 
Triticale Tank Mixes: For best performance, this product should be used in tank mix combination with bromoxynil herbicide. 
 
Triticale Use Restrictions 
 
• Maximum Single Application Rate: DO NOT exceed a total of 4 fluid ounces (0.125 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 4 fluid ounces (0.125 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 1 
• Minimum Retreatment Interval: N/A 
• Preharvest Interval (PHI): 7 days 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for restrictions 
pertinent to small grain areas that are grazed or cut for hay. 
 
SMALL GRAINS: WHEAT (Fall- and Spring-Seeded) 
 
Early Season Applications: Apply 2 - 4 fluid ounces of this product to wheat unless using one of the fall -seeded wheat specific 
programs below. Early season applications to fall-seeded wheat must be made prior to the jointing stage. 
 
Early season applications to spring-seeded wheat must be made before wheat exceeds the 6-leaf stage. 
 
Early developing wheat varieties such as TAM 107, Madison, or Wakefield must receive application between early tillering and the 
jointing stage. Care should be taken in staging these varieties to be certain that the application occurs prior to the jointi ng stage. 
 
To improve control of Russian thistle, flixweed, gromwell, or mayweed, add 2,4 -D amine or ester to a tank mix with one of the 
following herbicides: metsulfuron, triasulfuron, tribenuron, thifensulfuron, or prosulfuron. 
 
Specific Use Programs for Fall-Seeded Wheat Only: This product may be used at 6 fluid ounces on fall-seeded wheat in Western 
Oregon as a spring application only. In Colorado, Kansas, New Mexico, Oklahoma, and Texas, up to 8 fluid ounces of this product 
may be applied on fall -seeded wheat after it exceeds the 3 -leaf stage for suppression of perennial weeds, such as field bindweed. 
Applications may be made in the fall following a frost but before a killing freeze. This product may be tank mixed with 2,4-D amine at

18 
8 fluid ounces after wheat begins to tiller. Periods of extend ed stress such as cold and wet weather may enhance the possibility of 
crop injury. For fall applications only, do not use if the potential for crop injury is not acceptable. 
 
Preharvest Applications: This product can be used to control weeds that may interfere with harvest of wheat. Apply 8 fluid ounces 
this product per acre as a broadcast or spot treatment to annual broadleaf weeds when wheat is in the hard dough stage and the 
green color is gone from the nodes (joints) of the stem. Best results will be obtained if application can be made when weeds are 
actively growing but before weeds canopy. 
 
A waiting interval of 7 days is required before harvest. Do not use preharvest-treated wheat for seed unless a germination test is 
performed on the seed with an acceptable result of 95% germination or better. 
 
For control of additional broadleaf weeds or grasses, this product may be tank mixed with other herbicides such as metsulfuron, 
glyphosate, and 2,4-D. 
 
Wheat Tank Mixes 
This product may be applied in tank mixes with products containing the following herbicidal active ingredients: 2,4-D amine2, 2,4-D 
ester2, bromoxynil, clethodim4, clopyralid, chlorsulfuron1, MCPA, metsulfuron-methyl1, diuron3, glyphosate5, MCPA amine2, MCPA 
ester2, metribuzin3, prosulfuron1, thifensulfuron1,tribenuron1, triasulfuron1. 
 
1DO NOT use low rates of Sulfonylureas on mature weeds or on dense vegetative growth. 
2Up to 1 pound a.e. of these may be used on fall-seeded wheat if crop injury is acceptable. 
3 Tank-mixes with Diuron and Metribuzin are for use in Fall-seeded Wheat only. 
4DO NOT use this product in tank-mixture with Clethodim on Durum Wheat. If wild oats is the target weed, DO NOT use this product 
in tank-mixture with Fenoxaprop-ethyl + MCPA + 2,4-D. 
5 A tank-mix of up to 4 fl. ozs. of this product with Glyphosate for use as a pre-plant application to small grains may be applied with no 
waiting period prior to planting. 
 
Wheat Use Restrictions 
• Maximum Single Application Rate: DO NOT exceed the rates specified in the use instruction for the application timing and 
geography. 
• Maximum Annual Application Rate: DO NOT exceed a total of 16 fluid ounces (0.50 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): 7 days 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for restrictions 
pertinent to small grain areas that are grazed or cut for hay. 
• DO NOT use pre -harvest treated wheat for seed unless a less a germination test is performed on the seed with an 
acceptable result of 95% germination or better. 
• DO NOT make pre-harvest applications in California. 
 
SORGHUM 
 
This product may be applied preplant, postemer gence, or preharvest in sorghum to control man y annual broadleaf weeds and to 
reduce competition from established perennial broadleaf weeds, as well as control their seedlings. 
 
Preplant Application: Up to 8 fluid ounces of this product may be applied per acre if applied at least 15 days before sorghum 
planting. 
 
Postemergence Application: Up to 8 fluid ounces of this product per acre may be applied after sorghum is in the spike stage (all 
sorghum emerged) but before sorghum is 15" tall. For best performance, apply this product when the sorghum crop is in the 3 - 5 leaf 
stage and weeds are small (less than 3" tall). Use drop pipes (drop nozzles) if sorghum is taller than 8". Keep the spray off the sorghum 
leaves and out of the whorl to reduce the likelihood of crop injury and to improve spray coverage of weed foliage. Applying this product 
to sorghum during periods of rapid growth may result in temporary leaning of plants or rolling of leaves. These effects are u sually 
outgrown within 10 - 14 days. 
 
Preharvest Uses in Texas and Oklahoma Only: Up to 8 fluid ounces of this product per acre may be applied for weed suppression 
any time after the sorghum has reached the soft dough stage. An agriculturally approved surfactant may be used to improve 
performance. For aerial applications, use at least 2 gallons of water-based carrier per treated acre.. 
 
Split Application: This product may be applied in split applications: preplant fol lowed by postemergence or preharvest; or 
postemergence followed by preharvest.. 
 
Sorghum Tank Mixes and Sequential Treatment 
This product may be applied prior to, in a tank mix with, or after one or more of the following herbicide active ingredients 2,4-D, 
atrazine, bentazon, bromoxynil, dimethenamid-P, glyphosate, halosulfuron, metolachlor, paraquat, prosulfuron, quinclorac, s-
metolachlor.

19 
Sorghum Use Restrictions 
 
• Maximum Single Application Rate: DO NOT exceed a total of 8 fluid ounces (0.25 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 16 fluid ounces (0.50 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI) grain: 30 days 
• Preharvest Interval (PHI) forage: 20 days 
• Preharvest Interval (PHI) fodder: 30 days 
• DO NOT graze or feed treated sorghum forage or silage prior to mature grain stage. 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for restrictions 
pertinent to sorghum areas that are grazed or cut for hay. 
• DO NOT apply this product to sorghum grown for seed production. 
 
SOYBEAN 
 
Preplant Applications: Apply 4 - 16 fluid ounces of this product per acre to control emerged broadleaf weeds prior to planting 
soybeans. 
 
Do not exceed 16 fluid ounces of this product per acre in a spring application prior to planting soybeans. 
 
Following application of this product and a minimum accumulation of 1" rainfall or overhead irrigation, a waiting interval of 14 days is 
required for 8 fluid ounces per acre or less, and 28 days for 16 fluid ounces per acre. These intervals must be observed prio r to 
planting soybeans or crop injury may occur. 
 
Do not preplant applications of this product to soybeans in geographic areas with average annual rainfall less than 25". 
 
Preharvest Applications: This product can be used to control many annual and perennial broadleaf weeds and control or suppress 
many biennial and perennial broadleaf weeds in soybean prior to harvest (refer to Table 1). Apply 8 - 32 fluid ounces of this product 
per acre as a broadcast or spot treatment to emerged and actively growing weeds after soybean pods have reached mature brown 
color and at least 75% leaf drop has occurred. 
 
Treatments may not kill weeds that develop from seed or underground plant parts, such as rhizomes or bulblets, after the effe ctive 
period for this product. For seedling control, a follow-up program or other cultural practice could be instituted. 
 
Soybean Tank Mixes 
Preplant Tank Mixes: This product may be tank mixed with other herbi cides registered for early preplant use in soybeans includ ing 
burndown herbicides such as glyphosate and 2,4-D or residual herbicides 
 
Preharvest Tank Mixes: This product may be tank mixed with other herbicides regis tered for preharvest use in soybeans such as 
glyphosate and paraquat.. 
 
Soybean Use Restrictions 
 
• Maximum Single Application Rates: 
o Preplant: DO NOT exceed a total of 16 fluid ounces (0.50 lbs. a.e.) per acre per application. 
o Preharvest: DO NOT exceed a total of 32 fluid ounces (1.0 lbs. a.e.) per acreper application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 64 fluid ounces (2.0 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): 7 days 
• DO NOT feed soybean fodder or hay following a preharvest application of this product. 
• DO NOT use preharvest-treated soybean for seed unless a germination test is performed on the seed with an acceptable 
result of 95% germination or better. 
• DO NOT make preplant applications to soybeans in geographic areas with average annual rainfall less than 25 inches. 
• DO NOT make preharvest applications in California. 
 
SUGARCANE 
 
Apply this product for control of annual, biennial, or perennial broadleaf weeds listed in Table 1. Apply 8 - 24 fluid ounces of this 
product per acre for control of annual weeds, 16 - 32 fluid ounces for control of biennial weeds, and 32 fluid ounces for control or 
suppression of perennial weeds. 
 
Use the higher level of listed rate ranges when treating dense vegetative growth. 
 
Timing: This product may be applied to sugarcane any time after weeds have emerged, but before the close-in stage of sugarcane. 
Applications of 32 fluid ounces of this product per acre made over the top of actively growing sugarcane may result in crop injury. 
 
When possible, direct the spray beneath the sugarcane canopy to minimize the likelihood of crop injury. Using directed sprays will 
also help maximize the spray coverage of weed foliage.

20 
 
Sugarcane Tank Mixes 
This product may be tank mixed with other products registered for use in sugarcane such as asulam, atrazine, ametryn, and 2,4-D. 
 
Sugarcane Use Restrictions 
 
• Maximum Single Application Rates: 
o Annual Weeds: DO NOT exceed a total of 24 fluid ounces (0.75 lbs. a.e.) per application. 
o Biennial & Perennial Weeds: DO NOT exceed a total of 32 fluid ounces (1.0 lbs. a.e.) per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 64 fluid ounces (2.0 lbs. a.e.) acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval (PHI): 87 days 
• Refer to Table 8 in the PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD section of this label for restrictions 
pertinent to sugarcane areas that are grazed or cut for hay. 
 
PASTURE, HAY, RANGELAND, AND GENERAL FARMSTEAD (Noncropland) 
 
This product is recommended for use on pasture, hay, rangeland, and general farmstead (non-cropland) (including fencerows and 
non-irrigation ditchbanks) for control or suppression of broadleaf weed and brush species listed in Table 1. 
 
This product may also be applied to non -cropland areas to con trol broadleaf weeds in noxious weed control programs, districts, or 
areas including broadcast or spot treatment of roadsides and highways, utilities, railroad, and pipeline rights -of-way. Noxious weeds 
must be recognized at the state level, but programs may be administered at state, county, or other level. 
 
Uses described in this section also pertain to small grains (forage sorghum, rye, sudangrass, or wheat) grown for pasture use only . 
Some perennial weeds may be controlled with lower rates of either this product or this product plus 2,4-D (refer to Table 2). 
 
Rates and Timings: Refer to Table 2 for rate selection based on targeted weed or brush species. Some weed species will require 
tank mixes for adequate control. 
 
Newly seeded areas may be severely injured if more than 16 fluid ounces of this product is applied per acre. 
 
Established grass crops growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides ar e 
applied. Bentgrass, carpetgrass, buffalograss, and St. Augustinegrass may be injured if more than 16 fluid ounces of this pro duct is 
applied per acre. Usually colonial bentgrasses are more tolerant than creeping types. Velvetgrasses are most easily injured. 
Treatments will kill or injure alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes. 
 
Use Restrictions 
• DO NOT use this product on residential areas. 
• Maximum Single Application Rate: 
o Small Grains Grown for Forage/Fodder/Hay/Pasture: DO NOT exceed a total of 16 fluid ounces (0.5 lbs. a.e.) 
per acre per application. 
o Pasture/Rangeland: DO NOT exceed a total of 32 fluid ounces (1.0 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: 
o Small Grains Grown for Forage/Fodder/Hay/Pasture: DO NOT exceed a total of 16 fluid ounces (0.5 lbs. a.e.) 
per acre per crop year. 
o Pasture/Rangeland: DO NOT exceed 32 fluid ounces (1.0 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 1 
• Minimum Retreatment Interval: N/A 
• Rates above 32 fluid ounces (1.0 lbs. a.e.) are for spot treatment only. DO NOT apply ≥32 fluid ounces per acre by 
broadcast spray. 
• Preharvest interval (PHI): 
o Grass grown for hay: 7 days. 
o Timing restrictions for grazing or harvesting hay from treated fields are listed in TABLE 8. 
o There are no grazing restrictions for animals other than lactating daily animals. 
 
TABLE 8 
 TIMING RESTRICTIONS FOR LACTATING DAIRY ANIMALS FOLLOWING TREATMENT 
 
Rate per 
Treated Acre 
(fl. oz.) 
Days Before 
Grazing 
(days) 
Days Before Hay 
Harvest 
(days) 
Up to 16 
Up to 32 
Up to 64 
7 
21 
40 
37 
51 
70

21 
This product can be applied using water, oil in water emulsions including invert systems, or sprayable fluid fertilizer as a carrier (refer 
to the COMPATIBILITY TEST FOR MIX COMPONENTS section). 
 
To prepare oil in water emulsions, half -fill spray tank with water, then add the appropriate amount of emulsifier. With continuous 
agitation, slowly add the herbicide and then the oil (such as diesel oil or fuel oil) or a premix of oil plus additional emul sifier to spray 
tank. Complete filling of spray tank with water. Maintain vigorous agitation during spray operation to prevent oil and water from forming 
separate layers. This product may be applied broadcast using either ground or aerial application equipment. 
 
Aerial Application 
 
• Spray Volume: Use 2 - 40 gallons of diluted spray per treated acre in a water-based carrier. 
 
Ground Application 
 
• Spray Volume: Use 3 - 600 gallons of diluted spray per treated acre. The volume of spray applied will depend on the height, 
density, and type of weeds or brush being treated and on the type of equipment being used. 
• Spot Treatments: This product may be applied to individual clumps or small areas of undesirable vegetation using handgun or 
similar types of application equipment. Apply diluted sprays to allow complete wetting (up to runoff) of foliage and stems. 
 
CUT SURFACE TREATMENT 
 
 This product may be applied as a cut surface treatment for control of unwanted trees and prevention of sprouts of cut trees. 
 
Rate: Mix 1 part of this product with 1 - 3 parts water to create the application solution. Use the lower dilution rate when treating 
difficult-to-control species. 
 
• For Frill or Girdle Treatments: Make a continuous cut or a series of overlapping cuts using an axe to girdle tree trunk. Spray 
or paint the cut surface with the solution. 
• For Stump Treatments: Spray or paint freshly cut surface with the water mix. The area adjacent to the bark should be 
thoroughly wet. 
 
Note: For more rapid foliar effects, 2,4-D may be added to the solution. 
 
APPLICATION FOR CONTROL OF DORMANT MULTIFLORA ROSE 
 
This product can be applied when plants are dormant as an undiluted spot treatment directly to the soil or as a Lo -Oil basal bark 
treatment using an oil-water emulsion solution. 
 
• Spot treatments: Spot treatment applications of this product should be applied directly to the soil as close as possible to t he 
root crown but within 6 - 8" of the crown. On sloping terrain, apply this product to the uphill side of the crown. The use rate of 
this product depends on the canopy diameter of the multiflora rose. 
• Examples: Use 0.25, 1.0, or 2.35 fluid ounces of this product respectively, for 5, 10, or 15 feet canopy diameters. 
• Lo-Oil basal bark treatments: For Lo -Oil basal bark treatments, apply this product to the basal stem region from the ground 
line to a height of 12 - 18". Spray until runoff, with special emphasis on covering the root crown. For best results, apply this 
product when plants are dormant. 
 
To prepare approximately 2 gallons of a Lo-Oil spray solution: 
 
1. Combine 1.5 gallons of water, 1 ounce of emulsifier, 16 fluid ounces of this product, and 2.5 pints of No. 2 diesel fuel. 
2. Adjust the amounts of materials used proportionately to the amount of final spray solution desired. 
 
Dormant Multiflora Rose Application Restrictions: 
• DO NOT apply when snow or water prevents applying this product to the soil. 
• DO NOT apply after budbreak or when plants are showing signs of active growth when using Lo-Oil application to basal 
bark. 
• DO NOT exceed 8 gallons of spray solution mix applied per acre per year when using Lo-Oil application to basal bark.

22 
Pasture Tank Mixes 
This product may be applied in tank mixes with one or more of the following herbicides: metsulfuron-methyl, triasulfuron, triclopyr, 
2,4-D, clopyralid, paraquat, glyphosate, picloram. 
CONSERVATION RESERVE PROGRAM (CRP) 
 
This product is recommended for use on both newly seeded and established grasses grown in Conservation Reserve or federal Set-
Aside Programs. Treatments of this product will injure or may kill alfalfa, clovers, lespedeza, wild winter peas, vetch, and other 
legumes. 
 
Newly Seeded Areas: This product may be applied either preplant or postemergence to newly seeded grasses or small grains such 
as barley, oats, rye, sudangrass, wheat, or other grain species grown as a cover crop. Postemergence applications may be made 
after seedling grasses exceed the 3-leaf stage. Rates of this product greater than 16 fluid ounces per treated acre may severely injure 
newly seeded grasses. 
 
Preplant applications may injure new seedings if the interval between application and grass planting is less than 45 days per 16 fluid 
ounces of this product applied per treated acre west of the Mississippi River or 20 days per 16 fluid ounces applied eas t of the 
Mississippi River. 
 
Established Grass Stands: Established grass stands are perennial grasses planted one or more seasons prior to treatment. Certain 
species (bentgrass, carpetgrass, smooth brome, buffalograss, or St. Augustinegrass) may be injured when treated with more than 16 
fluid ounces of this product per treated acre. 
 
When applied at instructed rates, this product will control many annual and biennial weeds and provide control or suppression of 
many perennial weeds. 
 
Rates and Timings: Apply 4 - 32 fluid ounces of this product per acre. Refer to Table 2 for rates based on target weed species. 
This product may be tank mixed or applied sequentially with other prod ucts labeled for use in Conservation Reserve Programs such 
as atrazine, glyphosate, paraquat, or 2,4-D. 
 
CRP Use Restrictions 
• Maximum Single Application Rate: DO NOT exceed a total of 32 fluid ounces (1.0 lbs. a.e.) per acre per application. 
• Maximum Annual Application Rate: DO NOT exceed a total of 64 fluid ounces (2.0 lbs. a.e.) per acre per crop year. 
• Maximum Number of Applications per Year: 2 
• Minimum Retreatment Interval: 7 days 
• Preharvest Interval: N/A 
 
RIGHTS-OF-WAY, UTILITY, INDUSTRIAL AREAS, FENCEROWS AND OTHER NONCROP AREAS 
This product is recommended for use on general farmstead weed and brush control and for use on noncrop land areas such as 
rights of-way (such as roadways, rest areas, utility, railroad, highway, pipeline, and rights -of-way that run through pasture and 
rangeland); utility facilities (such as substations, pipelines, tankfarms, pumping stations, parking and storage areas, fencerows and non-
irrigated ditchbanks); brush control for forest site preparation or maintenance, conservation lands including natural are as (including 
wildlife management areas, wildlife openings, wildlife habitats, recreation areas, campgrounds, trailheads and trails), wildlife openings 
and other conservation lands. 
Observe all Precautions on this label. Read and follow the Mixing and Application section. 
General Farmstead 
This product can be used on or around farms and farmstead for control of many broadleaf weeds and brush in noncrop land areas 
only. 
Rights-of-Way 
This product can be used to control many broadleaf weeds on rights-of-way. This use includes applications to roadside, roadway and 
highways; to areas along utilities such as cable and powerlines; railroad track and embankment; highways, highway medians, br idge 
abutments, pipelines, and rights-of-way that run through pasture and rangeland. Use controlled application techniques that minimize 
the risk of off-target movement. 
 
Utility and Industrial Areas 
This product can be used to control many broadleaf weeds and brush in noncrop areas on or surrounding substations, pipelines, 
tankfarms, pump stations, production facilities, and bareground situations. It may also be used on parking and storage areas (refer to 
Best Stewardship Practices to avoid direct runoff from impervious surfaces). 
Fencerows 
This product can be used to control many broadleaf weeds and brush in fencerows. 
Mixing and Application 
Read and observe Management of Off -Site Movement recommendations in this label. This product can be applied using water, oil 
in water emulsions including invert systems, or, sprayable fluid fertilizer as a carrier. A compatibility test (see Compatibility Test section) 
should be made prior to tank mixing. 
To prepare oil in water emulsions, half -fill spray tank with water, then add the appropriate amount of emulsifier. With continuous 
agitation, slowly add the herbicide and then the herbicidal oil or a pre-mix of oil plus additional emulsifier to spray tank. Complete filling 
of spray tank with water. Maintain vigorous agitation during spray operation to prevent oil and water from forming separate l ayers.

23 
This product may be applied broadcast using either ground or aerial application equipment. When using ground equipment, apply low 
or high volume sprays between 3 to 600 gals. of diluted spray per treated acre. Volume of spray applied will depend on the height, density, 
and type of weeds or brush being treated and on the type of equipment being used. When using aerial equipment, apply 5 to 40 gals. 
of diluted spray per treated acre. 
This product may be applied to individual clumps or small areas (spot treatment) of undesirable vegetation using handgun or similar 
types of application equipment. Apply diluted sprays to allow complete wetting (up to runoff) of foliage and stems. 
Herbicide adjuvants or other spray additives (emulsifiers, spreader stickers, surfactants, wetting agents, drift control agen ts, or 
penetrants) may be used for wetting, penetration, or drift control. Spray additives must be agriculturally approved when used in pasture 
applications. If spray additives are used, read and follow all use recommendations and precautions on product label. 
Weeds and Brush Controlled 
When applied at instructed rates, will give control of many annual, biennial, and perennial broadleaf weeds, and many woody brush 
and vine species commonly found in noncrop-land areas. (Refer to General Weed List.) Noted (*) perennial weeds may be controlled 
with lower rates of either this product or this product plus tank mix combinations. See RATES AND TIMING below. 
 
Table 9: RATES AND TIMING 
Application rates and timings of this product are given below. Use the higher level of listed rate ranges when treating dense or tall 
vegetative growth. 
Weed Stage 
and Type 
Amount of Product Per 
Acre 
fl. oz. (lbs. a.e.) 
Gallons of Spray 
Mixture Per Acre* 
Spray Concentration for 
Use with Low Volume 
Application**** 
(%vol/vol) 
Annual 
Small, Actively Growing 8 to 16 (0.25 – 0.5) 25 to 50 3 
Established Weed Growth 16 to 24 (0.5 – 0.75) 50 to 75 3 
Biennial* - Rosette diameter 
Less than 3” 8 to 16 (0.25 – 0.5) 25 to 50 3 to 4 
3” or more 16 to 32 (0.5 – 1.0) 50 to 100 3 to 4 
Bolting 32 (1.0) 100 to 150 3 to 4 
Perennial 
Suppression or top growth control 8 to 16 (0.25 – 0.5) 50 to 100 4 
Noted ( *) Perennials 32 (1.0) 100 to 200 4 
Other Perennials 32 (1.0) 200 5 
Woody Brush and Vines*** 
Top Growth 8 to 32 (0.25 – 1.0) 50 to 200 5 
Stems and Roots 32 (1.0) 200 5 
 
* For best performance, make application when biennial weeds are in the rosette stage. 
** Assuming typical application rate of 1 quart. of this product/100 gals. 
*** Tank mixes may be required for optimal control. Refer to General Weed List. 
**** Low volume rates must not exceed 64 fl. oz.of this product maximum per acre per year (5% volume/volume = 10 gals. 
maximum solution per acre per year). 
 
FOREST SITE PREPARATION 
 
Product Information 
This product may be used for control of undesirable conifers as well as many broadleaf weeds, vines, brambles, hardwood brush, and 
trees in forest site preparation. This product may be applied as broadcast foliar sprays from ground or aerial equipment. This product 
is absorbed through the leaf surfaces quickly after spraying and will also be absorbed from the soil by the roots. Translocation through 
the leaves, stems, and roots provides control of undesirable young conifer and broadleaf species. Woody plants, brush, and trees may 
not display the full extent of herbicide efficacy until several months following treatment. This product provides application flexibility for 
extended windows of application and tank mix options (refer to Mixing and Application Procedures and Tank Mix Options). 
Mixing and Application Instructions 
Ground Operated Spray Equipment 
Thoroughly mix and apply the specified amount of this product ( 32 fl. oz. per acre maximum) in a minimum of 15 gals. of water per 
acre. Spray solution should uniformly cover undesirable foliage for best results. A suitable nonionic surfactant should be added to the 
spray solution to enhance foliage wetting, spreading, and solution absorption. Drift control and foam reducing agents may be added 
at specified rates, if needed. Spray pattern indicator agents may also be added at specified rates, if desired. DO NOT spray under windy 
or gusty conditions. Maintain proper buffer zone to ensure drift does not reach off -target vegetation. 
Aerial Spray Equipment 
Thoroughly mix the specified amount of this product (32 fl. oz. per acre maximum) in a minimum of 10 gals. of water per acre and 
uniformly apply with properly calibrated aerial equipment. A suitable nonionic surfactant should be added to the spray solution to

24 
enhance wetting, spreading, and solution absorption. All precautions should be taken to minimize or eliminate spray drift. Drift control 
and foam control agents may be added at specified rates, if needed. 
Tank Mix Options 
For extended range of species control, tank mix this product with other forest site preparation products such as imazapyr, glyphosate, 
sulfometuron, and triclopyr. Observe all precautions and restrictions on the product labels. Always follow the most restrictive label 
in a tank mix. 
TURF AND LAWNS 
Including Golf Course (Fairways, Aprons, Tees, and Rough), Parks, Recreational areas, Lawn care application, Sod farms. 
IMPORTANT: Observe all Precautions on this label. Read and follow Mixing and Application Procedures. 
Established grass stands growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides a re 
applied. To avoid injury to newly seeded grasses, application of this product should be delayed until after second mowing. Furthermore, 
application rates in excess of 16 fl. oz. . (0.5 lb. a.e.) per treated acre may cause noticeable stunting or discoloration of sensitive grass 
species such as bentgrass, carpetgrass, buffalograss, and St. Augustinegrass. 
In areas where roots of sensitive plants extend, do not apply in excess of 4 fl. oz. (0.125 lbs. a.e.) of this product per treated acre 
oncoarse-textured (sandy-type) soils, or in excess of 8 fl. oz. (0.25 lbs. a.e.) per treated acre on fine-textured (clay-type) soils. Do 
not make repeat applications in these areas for 30 days and until previous applications of this product have been activated in the 
soil by rain or irrigation. 
Weeds Controlled 
When applied at specified rates, will give control of many annual, biennial, and noted (*) perennial broadleaf weeds commonly found in 
turf. This product will also give growth suppression of many other listed perennial broadleaf weeds and woody brush and vine species, 
refer to Table 1. Refer to Table 2 or Table 10 for rates based on targeted weed or brush species and growth stage. Some weed 
species will require tank mixes for adequate control 
 
Mixing and Application 
Apply 30 to 200 gals. of diluted spray per tre ated acre (3 quarts. to 4-1/4 gals. on 1 ,000 sq. ft.), depending on density or height of 
weeds treated and on the type of equipment used. 
Rates and Timings 
Use the higher level of listed rate ranges when treating dense vegetative growth. 
 
Table 10: TURF AND LAWN BROADCAST APPLICATION RATES 
 
 
Weed Stage and Type Fl. oz. Per Teaspoon Per 
 Treated Acre (lbs a.e.) 1,000 Square Feet 
Annual 
Small, actively growing 8 to 16(0.25 – 0.5) 1 to 2-1/4 
Established weed growth 16 to 24 (0.5 -0.75) 2-1/4 to 3-1/4 
Biennial* - Rosette diameter 
Less than 3 inches 8 to 16 (0.25 – 0.5) 1 to 2-1/4 
3 inches or more 16 to 32 (0.5 – 1.0) 2-1/4 to 4-1/2 
Perennial, Woody Brush and Vines 16 to 32 (0.5 – 1.0) 2-1/4 to 4-1/2 
*For best performance, make application when biennial weeds are in the rosette stage. 
 
For best performance, apply when weeds are emerged and actively growing. 
Tank Mix Treatments 
READ AND FOLLOW THE LABEL OF EACH TANK MIX PRODUCT USED FOR PRECAUTIONARY STATEMENTS, DIRECTIONS 
FOR USE, APPLICATION RATES AND TIMINGS, AND OTHER RESTRICTIONS. Consult product labels for rate recommendations 
for tank mix partners. OBSERVE ALL PRECAUTIONS AND RESTRICTIONS ON THE PRODUCT LABELS. ALWAYS FOLLOW THE 
MOST RESTRICTIVE LABEL IN A TANK MIX. 
Tank mix treatments of this product may be made with 2,4-D, MCPA, MCPP, triclopyr, clopyralid or bromoxynil for control of additional 
weeds listed on the tank mix product label. 
Use the higher level of the listed rate ranges when treating established weeds..

25 
Noncrop Areas Restrictions 
Turf and Lawns DO NOT exceed 32 fl. oz. (1 lb. a.e.) of this product per treated acre during the growing season. 
Maximum Number of Applications: Up to 4 (application rate dependent). 
 
Noncrop areas (rights-of-ways, utility, industrial areas, fencerows), : DO NOT exceed a total of 64 fl. oz.(2 lbs. a.e.) of this product 
per treated acre during a year. 
Maximum Number of Applications: Up to 2 (application rate dependent).

26 
PESTS IN THIS LABEL 
 
Common Name Scientific Name Common Name Scientific Name 
Annuals: Annuals (continued): 
Alkanet Lithospermum arvense Pennycress, Field (Fanweed, Thlaspi arvense 
Amaranth, Palmer Amaranthus palmeri Frenchweed, Stinkweed) 
 Powell Amaranthus powellii Pepperweed, Virginia Lepidium virginicum 
 Spiny Amaranthus spinosus (Peppergrass) 
Aster, Slender Aster subulatus Pigweed, Prostrate Amaranthus blitoides 
Bedstraw, Catchweed Galium aparine Redroot Amaranthus retroflexus 
Beggarweed, Florida Desmodium tortuosum (Carelessweed) 
Broomweed, Common Gutierezia dracunculoides Smooth Amaranthus hybridus 
Buckwheat, Tartary Fagopyrum tatarium Tumble Amaranthus albus 
 Wild Polygonum convolulus Pineappleweed Matricaria matricarioides 
Buffalobur Solanum rostratum Poorjoe Diodia teres 
Burclover, California Medicago polymorpha Puncturevine Tribulus terrestris 
Burcucumber Sicyos angulatus Purslane, Common Portulaca oleracea 
Buttercup, Corn Ranunculus arvensis Pusley, Florida Richardia scabra 
 Creeping Ranunculus repens Radish, Wild Raphanus raphanistrum 
 Roughseed Ranunculus muricatus Ragweed, Common Ambrosia artemisiifolia 
 Western Field Ranunculus occidentalis Giant (Buffaloweed) Ambrosia trifida 
Carpetweed Mullugo verticillata Lance-Leaf Ambrosia bidentata 
Catchfly, Nightflowering Silene noctiflorum Ragwort, Tansy Senecia jacobea 
Chamomile, Corn Anthemis arvensis Rocket, London Sisymbrium irio 
Chervil, Bur Anthriscus caucalis Yellow Barbarea vulgaris 
Chickweed, Common Stellaria media Rubberweed, Bitter Hymenoxys oderata 
Clovers Trifolium spp. Salsify Tragopogon porrifolius 
Cockle, Corn Agrostemma githago Sesbania, Hemp Sesbania exaltata 
 Cow Vaccaria pyramidata Shepherdspurse Capsella bursa-pastoris 
 White Melandrium album Sicklepod Cassia obtusifolia 
Cocklebur, Common Xanthium strumarium Sida, Prickly (Teaweed) Sida spinosa 
Copperleaf, Hophornbeam Acalypha ostryifolia Smartweed, Green Polygonum scabrum 
Cornflower (Bachelor Button) Centaurea cyanus Pennsylvania Polygonum pensylvanicum 
Croton, Tropic Croton glandiola Sneezeweed, Bitter Helenium amurum 
 Woolly Croton capitatus Sowthistle, Annual Sonchus oleraceus 
Daisy, English Bellis perennis Spiny Sonchus asper 
Dragonhead, American Dracocephalum parvffiorum Spikeweed, Common Hemizonia pungens 
Eveningprimrose, Cutleaf Oenothera laciniata Spurge, Prostrate Euphorbia humistrata 
Falseflax, Smallseed Camelina microcarpa Spurry, Corn Spergula arvensis 
Fleabane, Annual Erigeron annuus Starbur, Bristly Acanthospermum hispidum 
Flixweed Descurainia sophia Starwort, Little Stellaria graminea 
Fumitory Fumaria officinalis Sumpweed, Rough Iva cilliata 
Goosefoot, Nettleleaf Chenopodium murale Sunflower, Common (Wild) Helianthus annuus 
Hempnettle Galeopsis tetrahit Thistle, Russian Salsola iberica 
Henbit Lamium amplexicaule Velvetleaf Abutilon theophrasti 
Jacob's Ladder Polemonium caeruleum Waterhemp, Common Amaranthus rudis 
Jimsonweed Datura stramonium Tall Amaranthus tuberculatus 
Knawel (German Moss) Scleranthus annuus Waterprimrose, Winged Ludwigia decurrens 
Knotweed, Prostrate Polygonum aviculare Wormwood Artemisia annua 
Kochia Kochia scoparia Biennials: 
Ladysthumb Polygonum persicaria Burdock, Common Arctium minus 
Lambsquarters, Common Chenopodium album Carrot, Wild (Queen Anne's Daucus carota 
Lettuce, Miners Claytonia perfoliata Lace) 
 Prickly Lactuca serriola Cockle, White Melandrium album 
Mallow, Common Malva neglecta Eveningprimrose, Common Oenothera biennis 
 Venice Hibiscus trionum Geranium, Carolina Geranium carolinianum 
Marestail (Horseweed) Hippurus vulgaris Gromwell Lithospermum spp. 
Mayweed Anthemis cotula Knapweed, Diffuse Cantaurea diffusa 
Morningglory, Ivyleaf 1pomea hederacea Spotted Cantaurea maculosa 
 Tall Ipomea purpurea Mallow, Dwarf Malva borealis 
Mustard, Black Brassica nigra Plantain, Bracted Plantago aristata 
 Blue Chorispora tenella Ragwort, Tansy Senecio jacobaea 
 Tansy Descurainia pinnata Starthistle, Yellow Centaurea solstitialis 
 Treacle Erysimum repandum Sweetclover Melilotus spp. 
 Tumble Sisymbriumm altissimum Teasel Dipsacus sativus 
 Wild Sinapis arvensis Thistle, Bull Cirsium vulgare 
Nightshade, Black Solanum nigrum Musk Carduus nutans 
 Cutleaf Solanum triflorum Plumeless Carduus acanthoides

27 
PESTS IN THIS LABEL (continued) 
 
 
 
Common Name Scientific Name Common Name Scientific Name 
Perennials: Woody Species: 
Alfalfa Medicago sativa Alder Alnus spp. 
Artichoke, Jerusalem Helianthus tuberosus Ash Fraxinus spp. 
Aster, Spiny Aster spinosus Aspen Populus spp. 
 Whiteheath Aster pilosus Basswood Tilia americana 
Bedstraw, Smooth Gallium mollugo Beech Fagus spp. 
Bindweed, Field Convolvulus arvensis Birch Betula spp. 
 Hedge Calystegia sepium Blackberry Rubus spp. 
Blueweed, Texas Helianthus ciliaris Blackgum Nyssa spp. 
Bursage, Woollyleaf, Ambrosia grayi Cedar Cedrus spp. 
(Bur Ragweed, Povertyweed) Cherry Prunus spp. 
Buttercup, Tall Ranunculus acris Chinquapin Chrysolepis chrysophylla 
Campion, Bladder Silene vulgaris Cottonwood Populus deltoides 
Chickweed, Field Cerastium arvense Creosotebush Larrea tridentata 
Mouseear Cerastium vulgatum Cucumbertree Magnolia acuminata 
Chicory Cichorium intybus Dewberry Rubus caesius 
Clover, Hop Trifoleum aureum Dogwood Corpus spp. 
Dandelion Taraxacum officinale Elm Ulmus spp. 
Dock, Broadleaf (Bitterdock) Rumex obtusifolius Grape Vitus spp. 
Curly Rumex crispus Hawthorn (Thornapple) Crataegus spp. 
Dogbane, Hemp Apocynum cannabinum Hemlock Tsuga spp. 
Dogfennel (Cypressweed) Eupatorium capillifolium Hickory Carya spp. 
Fern, Bracken Pteridium aquilinum Honeylocust Gleditsia triacanthos 
Garlic, Wild Allium vineale Honeysuckle Lonicera spp. 
Goldenrod, Canada Solidago canadensis Hornbeam Carpinus spp. 
 Missouri Solidago missouriensis Huckleberry Vaccinium arboreum 
Goldenweed, Common Isocoma coronopifolia Huisache Acacia farnesiana 
Hawkweed Hieracium spp. Ivy, Poison Rhus radicans 
Henbane, Black Hyoscyamus niger Kudzu Pueraria lobata 
Horsenettle, Carolina Solanum caroliniense Locust, Black Robinia pseudoacacia 
Ironweed Vemonia spp. Maple Acer spp. 
Knapweed, Black Centaurea nigra Mesquite Prosopis ruscifolia 
 Russian Centaurea repens Oak Quercus spp. 
Milkweed, Common Asclepias syriaca Oak, Poison Rhus toxicodendron 
 Honeyvine Ampelamus albidus Olive, Russian Eleaegnus angustifolia 
 Western Whorled Asclepias subverticillata Persimmon, Eastern Diospyros virginiana 
Nettle, Stinging Urtica dioica Pine Pinus spp. 
Nightshade, Silverleaf (White Solanum elaeagnifolium Plum, Sand (Wild Plum) Prunus amygdalis 
Horsenettle) Poplar Populus spp. 
Onion, Wild Allium canadense Rabbitbrush Chtysothamnus pulchellus 
Plantain, Broadleaf Plantago major Redcedar, Eastern Juniperus virginiana 
 Buckhorn Plantago lanceolata Rose, McCartney Rosa bracteata 
Pokeweed Phytolacea americana Multiflora Rosa multifiorum 
Ragweed, Western Ambrosia psilstachya Sagebrush, Fringed Artemisia frigida 
Redvine Brunnichia ovata Sassafras Sassafras albidum 
Sericea Lespedeza Lespedeza cuneata Serviceberry Amelanchier sanguinea 
Smartweed, Swamp Polygonum coccineum Spicebush Lindera benzoin 
Snakeweed, Broom Gutierezia sarothrae Spruce Picea spp. 
Sorrel, Red (Sheep Sorrel) Rumex acetosella Sumac Rhus spp. 
Sowthistle, Perennial Sonchus arvensis Sweetgum Liquidamber styraciflua 
Spurge, Leafy Euphorbia esula Sycamore Platanus occidentalis 
Sundrops Oenothera perrenis Tarbush Flourensia cernua 
Thistle, Canada Cirsium arvense Willow Salix spp. 
 Scotc
h 
Onopordum acanthium Witchhazel Hamamelis macrophylla 
Toadflax, Dalmatian Linaria genistrata Yaupon Ilex spp. 
Tropical Soda Apple Solanum viarum Yucca Yucca spp. 
Trumpetcreeper (Buckvine) Campsis radicans 
Vetch Vicia spp. 
Waterhemlock, Spotted Cicuta maculata 
Waterprimrose, Creeping Ludwigia peploides 
Woodsorrel, Creeping Oxalis corniculata 
 Yellow Oxalis stricta 
Wormwood Absinth Artemesia absinthium 
 Louisiana Artemesia ludoviciana 
Yankeeweed Eupatorium compositifolium 
Yarrow, Common Achillea millefolium

28 
CROPS 
 
This product can be used on the following: 
• Asparagus 
• Corn (Not registered for use on Sweet Corn) 
• Cotton 
• Fallow Systems (Between Crop Applications) 
• Grass Grown for Seed 
• Proso Millet 
• Small Grains (Barley, Oat, Triticale and Wheat) 
• Sorghum 
• Soybean 
• Sugarcane 
• Conservation Reserve Program (CRP) 
• Pastures, Rangeland, General Farmstead 
• Rights-of-way, Utility, Industrial Areas, Fencerows, and Other Noncrop 
• Cut Surface Tree Treatments 
• Dormant Applications for Control of Multiflora Rose 
• Forest Site Preparation 
• Turf: (Sod, lawns, and golf courses) 
 
Look inside for complete RESTRICTIONS AND LIMITATIONS and APPLICATION INSTRUCTIONS. 
 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal, Open dumping is prohibited. This product may not be mixed, loaded, 
or used within 50 feet of all wells including abandoned wells, drainage wells, and sinkholes. 
PESTICIDE STORAGE: Groundwater contamination may be reduced by diking and flooring of permanent liquid bulk storage sites 
with an impermeable material. Store in original container in a well-ventilated area separately from fertilizer, feed, and foodstuffs. Avoid 
cross-contamination with other pesticides. 
PESTICIDE DISPOSAL: Wastes resulting from this product may be disposed of on site or at an approved waste disposal facility. 
Pesticide, spray mixture, or rinsate that cannot be used according to label instructions must be disposed of according to federal, state 
or local procedures under Subtitle C of the Resource Conservation and Recovery Act. Improper disposal of excess pesticide, spray 
mix, or rinsate is a violation of federal law. 
CONTAINER DISPOSAL: 
[Note to Reviewer: The following statement will be included on all Final Printed Labels bearing multiple Container Disposal (Container 
Handling) statements] “NOTE: This product is available in multiple containers. Refer to the Net Contents section of this products 
labeling for the applicable “Nonrefillable” or “Refillable” designation. Follow the container disposal [handling] instruction s below that 
apply to your container type / size. 
[Note to Reviewer: The bracketed section headers will be included when multiple container types / sizes are listed on the lab el.] 
[Nonrefillable Containers 5 Gallons or Less: ] Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and 
recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 
seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture 
and dispose of in a sanitary landfill, or by other procedures approved by State and local authorities. Plastic containers are also 
disposable by i ncineration, or, if allowed by State and local authorities, by burning. If burned stay out of smoke. 
[Nonrefillable containers larger than 5 gallons: ] Nonrefillable container. Do not reuse or refill this container. Offer for recycling if 
available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining 
contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container 
on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end 
and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty 
the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. 
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds 
after the flow begins to drip. Hold container upside down over application equipment or mix tank and continue to drain for 10 
seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later 
use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain 
for 10 seconds after the flow begins to drip. 
[Refillable containers larger than 5 gallons: ] Refillable container. Refill this container with pesticide only. Do not reuse this 
container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining 
contents from this container into application equipment or a mix tank. Fill the container about 10% full with water and, if possible, 
spray all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate 
into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. 
Or 
[Refillable Container:] Refill this container with pesticide only. Do not reuse this container for any other purpose. Close all openings 
and replace all caps. Contact Nufarm’s Customer Service Department at 1 -800-345-3330 to arrange for return of the empty refillable 
container.

29 
WARRANTY DISCLAIMER 
The directions for use of this product must be followed carefully. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, (1) THE GOODS 
DELIVERED TO YOU ARE FURNISHED “AS IS” BY MANUFACTURER OR SELLER AND (2) MANUFACTURER AND SELLER MAKE NO 
WARRANTIES, GUARANTEES, OR REPRESENTATIONS OF ANY KIND TO BUYER OR USER, EITHER EXPRESS OR IMPLIED, OR BY USAGE 
OF TRADE, STATUTORY OR OTHERWISE, WITH REGARD TO THE PRODUCT SOLD, INCLUDING, BUT NOT LIMITED TO MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPO SE, USE, OR ELIGIBILITY OF THE PRODUCT FOR ANY PARTICULAR TRADE USAGE. UNINTENDED 
CONSEQUENCES, INCLUDING BUT NOT LIMITED TO INEFFECTIVENESS, MAY RESULT BECAUSE OF SUCH FACTORS AS THE PRESENCE 
OR ABSENCE OF OTHER MATERIALS USED IN COMBINATION WITH THE GOODS, OR THE MANNER OF USE OR APPLICATION, INCLUDING 
WEATHER, ALL OF WHIC H ARE BEYOND THE CONTROL OF MANUFACTURER OR SELLER AND ASSUMED BY BUYER OR USER. THIS 
WRITING CONTAINS ALL OF THE REPRESENTATIONS AND AGREEMENTS BETWEEN BUYER, MANUFACTURER AND SELLER, AND NO 
PERSON OR AGENT OF MANUFACTURER OR SELLER HAS ANY AUTHORITY TO M AKE ANY REPRESENTATION OR WARRANTY OR 
AGREEMENT RELATING IN ANY WAY TO THESE GOODS. 
 
LIMITATION OF LIABILITY 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL MANUFACTURER OR SELLER BE LIABLE FOR SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THEIR NATURE OF PENALTIES RELATING TO THE GOODS SOLD, 
INCLUDING USE, APPLICATION, HANDLING, AND DISPOSAL. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, MANUFACTURER OR 
SELLER SHALL NOT BE LIABLE TO BUYER OR USER BY WAY OF INDEMNIFICATION TO BUYER OR TO CUSTOMERS OF BUYER, IF ANY, OR 
FOR ANY DAMAGES OR SUMS OF MONEY, CLAIMS OR DEMANDS WHATSOEVER , RESULTING FROM OR BY REASON OF, OR RISING OUT 
OF THE MISUSE, OR FAILURE TO FOLLOW LABEL WARNINGS OR INSTRUCTIONS FOR USE, OF THE GOODS SOLD BY MANUFACTURER OR 
SELLER TO BUYER. ALL SUCH RISKS SHALL BE ASSUMED BY THE BUYER, USER, OR ITS CUSTOMERS. TO THE EXTENT CONSISTENT WITH 
APPLICABLE LAW, BUYER'S OR USER'S EXCLUSIVE REMEDY, AND MANUFACTURER'S OR SELLER'S TOTAL LIABILITY SHALL BE FOR 
DAMAGES NOT EXCEEDING THE COST OF THE PRODUCT. 
 
If you DO NOT agree with or DO NOT accept any of directions for use, the warranty disclaimers, or limitations on liability, DO NOT use the 
product, and return it unopened to the Seller, and the purchase price will be refunded. 
(RVxxx1) 
 
Banvel, Banvel SGF, Basagran, Clarity, CLEARFIELD °, Frontier, Guardsman, Laddok, Lightning, Marksman, Paramount, Prowl, and 
Outlook are registered trademarks of BASF. 
Accent, Ally, Bladex, Express, Extrazine, Harmony, and Karmex, are registered trademarks of E. I. du Pont de Nemours & Company. 
Amber, Beacon, Bicep II Magnum, Caparol, Cyclone, DoublePlay, Dual II Magnum, Evik, Exceed, Gramoxone, Peak, Princep, 
Spirit, Surpass, Topnotch, Touchdown, and Warrior are registered trademarks of Syngenta Group Company. 
Axiom, Bronate, Buctril, Liberty, Liberty Link, and Sencor are registered trademarks of Bayer CropScience. 
Crossbow, Curtail, FirstRate, Garlon, Kerb, Lorsban, Stinger, and Tordon are registered trademarks and Hornet is a trademark of 
Dow AgroSciences LLC. 
Bullet, Fallow Master, Harness, Landmaster, Lariat, Lasso, Ramrod, Roundup Ultra, and Roundup Ready are registered trademarks 
and Degree, Degree Xtra, and Field Master are trademarks of Monsanto Company. 
Permit and Eradicane, are registered trademarks of Gowan co. 
 Furadan and Pounce are registered trademarks of FMC Corp. Moxy is a trademark of AgriNance LLC. 
Turbo Teejet and Turbo Floodjet are registered trademarks of Spraying Systems, Inc. 
Delavan is a registered trademark of Garlock International, Inc. 
Sutan is a registered trademark of Tri Ag Inc. 
Ambush is a registered trademark of AMVAC Chemical Corp. 
Asulox is a registered trademark of United Phosphorus 
Razor®, Razor® Pro, Garrison®, Credit® and Credit® Extra, Maestro®, and Maestro® MA, Cutback®, Purestand®, Tahoe®, Kaiso®, 
Diablo®, GlyKamba® Spyder®, Victory®, Trooper® 22K, Candor®, Treaty® and Treaty® Extra are registered trademarks of Nufarm 
Americas Inc.