crop-chem-docs/corpus/epa_ppls/279-3471.md

# F9070-1 HERBICIDE

- EPA Reg No: **279-3471**
- Registrant: FMC CORPORATION 
- Signal word: Caution
- Active ingredients: Carfentrazone-ethyl (21.3%)
- Label accepted: 2024-02-21
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-03471-20240221.pdf

---
February 21, 2024 
 
Cristina Rodríguez 
Manager, Sr. Product Registrations 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
Subject: Label Amendment - Registration Review Mitigation for carfentrazone-ethyl 
 Product Name: F9070-1 Herbicide 
 EPA Registration Number: 279-3471 
 Application Date: June 15, 2023 
Decision Number: 595066 
 
Dear Cristina Rodríguez: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), 
as amended, has completed reviewing all the information submitted with your application to 
support the Registration Review of the above referenced product in connection with the 
carfentrazone-ethyl Interim Decision, and has concluded that your submission is acceptable. 
The label referred to above, submitted in connection with registration under FIFRA, as 
amended, is acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the 
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In 
addition, regardless of whether a website is referenced on your product’s label, claims made on 
the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website 
contains false or misleading statements or claims substantially differing from the EPA approved 
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance 
Assurance. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes 
all previously accepted labeling. You must submit one copy of the final printed labeling

Page 2 of 2 
EPA Reg. No. 279-3471 
Decision No. 595066 
 
before you release the product for shipment with the new labeling. In accordance with 
40 CFR 152.130(c), you may distribute or sell this product under the previously 
approved labeling for 12 months from the date of this letter. After 12 months, you may 
only distribute or sell this product if it bears this new revised labeling or subsequently 
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its 
implementing regulation at 40 CFR 152.3. 
 
If you have any questions about this letter, please contact Concepción Rodríguez by phone at 
202-566-0820, or via email at concepcion.rodriguez@epa.gov. 
 
 Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
 
 
ENCLOSURE: Stamped label

Feb 21, 2024
279-3471

2 
PRECAUTIONARY STATEMENTS 
Hazards to Humans (and Domestic Animals) 
Caution 
Harmful if swallowed, absorbed through the skin or inhaled. Causes moderate eye irritation. Avoid breathing 
vapors. Avoid contact with eyes, skin or clothing. 
 
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear : long-sleeved shirt and long pants, chemical resistant gloves, 
and shoes plus socks. 
 
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this 
product. Do not reuse them. Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such 
instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
 
User Safety Recommendations: 
Users should: 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. 
Users should remove PPE immediately after handling this product. Wash the outsides of gloves before 
removing. As soon as possible, wash thoroughly and change into clean clothing. 
• Users should wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. 
 
ENVIRONMENTAL HAZARDS 
Carfentrazone-ethyl is very toxic to algae and moderately toxic to fish. Do not apply directly to water, to 
areas where surface water is present or to intertidal areas below the high water mark, except as specified 
on this label. Do not contaminate water when disposing of equipment wash. 
 
Fish Advisory Statement: This product may be hazardous to aquatic organisms, particularly in clear, 
shallow water bodies that are adjacent to treated areas. Transport to water by runoff or spray drift of this 
product in areas where surface water is present, or intertidal areas below the mean high water mark, should 
be avoided. Do not contaminate water when disposing of equipment wash water or rinsate. 
 
For ground water: 
Residues of this chemical have properties and characteristics associated with chemicals detected 
in ground water. Residues of this chemical may leach into ground water if the chemical is used in 
areas where soils are permeable, particularly where the water table is shallow. 
 
For surface water: 
This product may impact surface water quality due to runoff of rain water. This is especially true 
for poorly draining soils and soils with shallow gr ound water. This product is classified as having 
high potential for reaching surface water via runoff for several months or more after application. A 
level, well-maintained vegetative buffer strip between areas to which this product is applied and 
surface water features such as ponds, streams, and springs will reduce the potential loading of 
carfentrazone-ethyl residues from runoff water and sediment. Runoff of this product will be 
reduced by avoiding applications when rainfall is forecasted to occur within 48 hours. 
 
Non-target Organism Advisory Statement: This product is toxic to plants and may adversely impact the 
forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. 
Protect the forage and habitat of non-target organisms by minimizing spray drift. 
 
Physical/Chemical Hazards 
Do not use or store near heat or open flame.

3 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
 
Use Restrictions: 
Only use for sites, pests, and application methods specified on this labeling. 
Do not apply this product through any type of irrigation system. 
 
Do not apply this product in a way that will contact workers or other persons, either directly or through drift. 
Only protected handlers may be in the area during application. For any requirements specific to your State 
or Tribe, consult the agency responsible for pesticide regulation. 
 
Endangered Species: 
It is a Federal offense to use any pesticide in a manner that results in the death of an endangered species. 
Use of this product may pose a hazard to endangered or threatened species. When using this product, you 
must follow the measures contained in the Endangered Species Protection Bulletin for the county in which 
you are applying the product. To obtain Bulletins, no more than six months before using this product, consult 
http://www.epa.gov/espp/ or call 1-800-447-3813. You must use the Bulletin valid for the month in which 
you will apply the product. 
 
WEED RESISTANCE MANAGEMENT 
For resistance management, F9070-1 is a Group 14 herbicide. Any weed population may contain or develop 
plants naturally resistant to F9070-1 and other Group 14 herbicides. The resistant biotypes may dominate 
the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance 
management strategies should be followed. 
 
To delay herbicide resistance take one or more of the following steps: 
 
• Rotate the use of F9070-1 or other Group 14 herbicides within a growing season sequence or among 
growing seasons with different herbicide groups that control the same weeds in a field. 
 
• Use tank mixtures with herbicides from a different group if such use is permitted; where information on 
resistance in target weed species is available, use the less resistance-prone partner at a rate that will control 
the target weed(s) equally as well as the more resistance prone partner. Consult your local extension 
service or certified crop advisor if you are unsure as to which active ingredient is currently less prone to 
resistance. 
 
• Adopt an integrated weed-management program for herbicide use that includes scouting and uses 
historical information related to herbicide use and crop rotation, and that considers tillage (or other 
mechanical control methods), cultural (e.g., higher crop seeding rates; precision fertilizer application 
method and timing to favor the crop and not the weeds), biological (weed competitive crops or varieties) 
and other management practices. 
 
• Scout after herbicide application to monitor weed populations for early signs of resistance development. 
Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled 
by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading 
patch of non-controlled plants of a particular weed species; (3) surviving plants mixed with controlled 
individuals of the same species. If resistance is suspected, prevent weed seed production in the affected 
area by an alternative herbicide from a different group or by a mechanical method such as hoeing or tillage. 
Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment 
when moving between fields, and planting clean seed.

4 
• If a weed pest population continues to progress after treatment with this product, discontinue use of this 
product, and switch to another management strategy or herbicide with a different mode of action, if 
available. 
• Contact your local extension specialist or certified crop advisors for additional pesticide resistance-
management and/or integrated weed-management recommendations for specific crops and weed biotypes. 
 
• For further information or to report suspected resistance, contact FMC Corporation at 1-800-331-3148 . 
 
 
SPRAY DRIFT 
 
Aerial Applications: 
x For aerial applications, the distance of the outer most nozzles on the boom must not exceed 
75% of the length of the wingspan or 90% of rotor diameter. To further reduce drift, use on half 
of the length of the wingspan or rotor diameter at the edge of the field. 
x Applicators must only spray when wind speed is 10 miles per hour or less. 
x Applicators must not spray during temperature inversions. 
x For aerial applications, the release height must be no higher than 10 feet from the top of the 
crop canopy, unless a greater application height is required for pilot safety. 
x For aerial applications, select nozzle and pressure that produce medium to coarse spray 
droplets as indicated in nozzle manufacturer’s catalogues and in accordance with ASABE 
Standard 572.1. 
 
Ground Boom Applications: 
x For ground boom applications, apply with the nozzle height no more than 4 feet above the 
ground or crop canopy. For all other ground applications, the nozzle must be no more than 4 
feet from the target vegetation. 
x For ground applications, select nozzle and pressure that produce medium to coarse spray 
droplets as indicated in nozzle manufacturer’s catalogues and in accordance with ASABE 
Standard 572.1. 
 
 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR 
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective equipment (PPE), and 
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered 
by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 
12 hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and 
that involves contact with anything that has been treated, such as plants, soil, or water, is: Coveralls, 
waterproof gloves, and shoes plus socks. 
 
Non-Agricultural Use Requirements 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product 
is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. 
Re-entry Statement: Do not allow people (other than applicator) or pets on treatment area during 
application. Do not enter treatment area until spray has dried.

5 
STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage and disposal. 
Pesticide Storage 
Not for use or storage in or around the home. 
Keep out of reach of children and animals. Store in original containers only. Store in a cool, dry place 
and avoid excess heat. Carefully open containers. After partial use, replace lids and close tightly. Do not 
put formulated or dilute material into food or drink containers. Do not contaminate other pesticides, 
fertilizers, water, food, or feed by inappropriate storage or disposal. 
In case of spill, avoid contact, isolate area and keep out unprotected persons and animals. Confine spills. 
Call CHEMTREC (Transportation and spills): (800) 424-9300. 
To confine spill: Dike surrounding area, sweep up spillage. Dispose of in accordance with information 
given under Pesticide Disposal. Wash spill area with water, absorb with sand, cat litter or commercial 
clay, sweep up and dispose of in an approved manner. Place damaged container in a larger holding 
container. Identify contents per required hazardous waste labeling regulations. 
Pesticide Disposal 
Waste resulting from the use of this product may be disposed of at an approved waste disposal facility. 
Container Handling 
Nonrefillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) 
promptly after emptying. Triple rinse as follows: (For containers greater than 5 gallons) Empty the 
remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. 
Replace and tighten closures. Tip container on its side and roll It back and forth, ensuring at least one 
complete revolution, for 30 seconds. Stand the container on its end and tip It back and forth several 
times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times. (For containers 5 gallons or less) Empty the remaining 
contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. 
Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application 
equipment or a mix tank or store rlnsate for later use or disposal. Drain for 10 seconds after the flow 
begins to drip. Repeat this procedure two more limes. Triple rinse (or equivalent). Then offer for 
recycling if available, or reconditioning. or puncture and dispose of in a sanitary landfill, or incineration, 
or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. 
Returnable/Refillable Containers - Refill this container with pesticide only. Do not reuse this container 
for any other purpose. Cleaning the container before final disposal Is the responsibility of the person 
disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the 
container before final disposal, empty the remaining contents into application equipment or mix tank. 
Fill the container about 10% full with water. Agitate vigorously or recirculate water with the pump for 2 
minutes. Pour or pump rinsate into application equipment or rinsate collection system .Repeat this 
rinsing procedure two more times. If unable to return or refill, offer for recycling if available, or 
reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state 
and local authorities, by burning. If burned, stay out of smoke. 
 
PRODUCT INFORMATION 
F9070-1 is an emulsion oil in water formulation. F9070-1 is to be mixed with water, liquid fertilizer or 
mixtures of water and liquid fertilizer and adjuvants and applied to labeled crops as a harvest aid and to 
defoliate/desiccate labeled crops. 
Weed control is optimized when the product is applied to actively growing weeds. F9070-1 is a contact 
herbicide. Within a few hours following application, the foliage of susceptible weeds show signs of 
desiccation. 
Extremes in environmental conditions such as temperature, moisture, soil conditions, and cultural practices 
may affect the activity of F9070-1. Herbicide symptoms may be accelerated under moist conditions. Weed 
control may be reduced when weeds are hardened off by drought and become less susceptible to F9070-
1.

6 
TANK MIXTURES (See specific crop application instructions for additional tank mixture restrictins and 
information) 
 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each 
product in the tank mixture. 
 
F9070-1 may be tank-mixed with other registered harvest aid products. Refer to this and other product’s 
labels for mixing instructions, precautions, and restrictions. Follow the most restrictive instructions for each 
tank mix partner. When preparing a new tank mix conduct an appropriate compatibility test by mixing 
proportional amounts of all spray ingredients in a test vessel (jar) prior to tank mixing with other products. 
Shake the mixture vigorously and allow it to stand for five to ten minutes. Rapid precipitation of the 
ingredients and failure to re-suspend when shaken indicates that the mixture is incompatible and should 
not be applied. Provided the jar test indicates the mixture to be compatible, prepare the tank mixture as 
follows: Fill the tank one fourth full with water. With the agitator operating, add the recommended amounts 
of ingredients using the following order: dry granules first, and liquid suspensions (flowables) second. As 
the agitation continues and the tank is filled with water add emulsifiable concentrate products third followed 
by the addition of water soluble products. 
 
ADJUVANT USE REQUIREMENTS 
The use of a quality spray adjuvant is required for optimum performance. Refer to the individual crop 
sections of this label for specific adjuvant type and use rates. 
 
ON-FARM TESTING 
Not all varieties or cultivars of labeled crops have been fully evaluated under all environmental and soil 
conditions. Consult with your local seed company for additional information. 
It may also be beneficial to conduct small on-farm trials under actual conditions with specific varieties or 
cultivars before treating large acreage. 
 
MIXING INFORMATION 
Mixing and Loading Instructions 
Start by filling the tank with ¾ of the desired volume of clean water and, with agitation, add the proper 
amount of F9070-1. Complete filling the spray tank to the desired volume. Maintain sufficient agitation to 
keep materials in solution during both mixing and application and until the spray tank has been emptied. 
For tank mixtures, follow your local extension guidelines for mixing order. General guidelines are: add dry 
materials first and agitate until mixed; then EW or water soluble liquids; then EC formulations; then, add 
adjuvants last. Ensure the compatibility of other products and/or liquid fertilizers with F9070-1 before mixing 
them together in the spray tank. 
 
Mixing Precautions 
Avoid the overnight storage of F9070-1 spray mixtures. If spray solution is stored overnight or longer, 
thoroughly agitate spray mixture before applying the solution. Premixing F9070-1 spray solutions in nurse 
tanks is not recommended. Maintain continuous and adequate spray solution agitation until all the spray 
solution has been used. Do not use with tank additives that alter the pH of the spray solution below pH 5 or 
above pH 8. Buffer spray solution to alter the pH range as appropriate. 
 
SPRAY EQUIPMENT CLEAN-OUT 
Many new pesticides are very active at low rates, especially to sensitive crops. Residues left in mixing 
equipment, spray tanks, hoses, spray booms and nozzles can cause crop effects if they are not properly 
cleaned. As soon as possible after spraying F9070-1 and before using the sprayer equipment for any other 
applications, the sprayer equipment must be thoroughly cleaned using the following procedure. In addition, 
users must take appropriate steps to ensure proper equipment clean-out for any other products mixed with 
F9070-1 as required on the other product labels. More complete cleaning can be achieved if the spray 
system is cleaned immediately following the application.

7 
1. Drain sprayer tank, hoses, spray boom and spray nozzles. Use a high-pressure detergent wash to 
remove physical sediment and residues from the inside of the sprayer tank and thoroughly rinse. Then, 
thoroughly flush sprayer hoses, spray boom and spray nozzles with a clean water rinse. Remove and clean 
spray tips and all filters and screens (tank, spray hose and spray tips) separately in the ammonia solution 
of Step 2. 
 
2. Next, prepare a sprayer cleaning solution by adding three gallons of ammonia (containing at least 3% 
active) per 100 gallons of clean water. Prepare sufficient cleaning solution to allow the operation of the 
spray system for a minimum of 15 minutes to thoroughly flush hoses, spray boom and spray nozzles. 
 
3. Convenient and thorough cleaning of the sprayer can be achieved if the ammonia solution or fresh water 
is left in the spray tank, hoses, spray booms and spray nozzles overnight or during storage. 
 
4. Before using the sprayer, completely drain the sprayer system. Rinse the tank with clean water and 
flush through the hoses, spray boom, and spray nozzles with clean water. 
 
5. Properly dispose of all cleaning solution and rinsate in accordance with Federal, State, and local 
regulations and guidelines. 
 
Do not apply sprayer cleaning solutions or rinsate to sensitive crops. 
 
Do not store the sprayer overnight or for any extended period of time with F9070-1 spray solution remaining 
in the tank, spray lines, spray boom plumbing, spray nozzles or strainers. 
 
If the sprayer has been stored or idle, purge the spray boom and nozzles with clean water before beginning 
any application. 
 
Should small quantities of F9070-1 remain in inadequately cleaned mixing, loading and/or spray equipment, 
they may be released during subsequent applications potentially causing effects to certain crops and other 
vegetation. FMC accepts no liability for any effects due to inadequately cleaned equipment. 
 
APPLICATION METHODS 
GROUND APPLICATION 
Use ground sprayers designed, calibrated and operated to deliver uniform spray droplets to the targeted 
plant or plant parts. Adjust sprayer nozzles to achieve uniform plant coverage. Overlaps and slower ground 
speeds (caused by continuing to spray while starting, stopping or turning) may result in higher application 
rates and possible crop response. 
 
Spray Buffer for Ground Application 
Spray buffer zones for ground applications, listed in chart below, are required near desirable perennial 
vegetation or crops before blossom and after total leaf drop, and/or near other desirable or annual crops. 
 
Buffers For Ground Application 
 F9070-1 USE RATE 
(lbs ai/A) 
Low Spray Boom 
Buffer (ft.) 
High Spray Boom 
Buffer (ft.) 
0.024 20 33 
0.031 26 46 
 
Broadcast Boom Sprayers 
Use a broadcast boom sprayer equipped with the appropriate nozzles, spray tips and screens and adjusted 
to provide optimum spray distribution and coverage at the appropriate operating pressures. Use nozzles 
that produce minimal amounts of fine spray droplets. Do not exceed 30 psi spray pressure unless otherwise 
required by the manufacturer of drift reducing nozzles. Apply a minimum of 10 gallons of finished spray per 
acre. Use higher spray volumes when there is a dense weed population or crop canopy. Adjust sprayers to 
position spray tips no lower than 12-18 inches above the crop or weed canopy depending on the nozzle

8 
specification. Operate the sprayer to avoid the application of high herbicide rates directly over the rows or 
into the whorl of treated crop plants. 
 
AERIAL APPLICATION 
Use nozzle types and arrangements that will provide optimum coverage while producing a minimal amount 
of fine droplets. Apply at a minimum of 5 gallons of finished spray per acre. Spray volumes greater than 5 
gpa may be needed for harvest aid and defoliation treatments, or for dense weed populations or with heavy 
crop canopies. 
 
SPRAY DRIFT MANAGEMENT 
AVOIDING SPRAY DRIFT AT THE APPLICATION SITE IS THE RESPONSIBILITY OF THE 
APPLICATOR AND THE GROWER. 
 
F9070-1 is a contact PPO herbicide. Avoid any drift conditions that would allow the product to contact 
desirable vegetation. F9070-1 is not volatile, however; mist from spray drift may cause injury to sensitive 
plants. 
 
The interaction of equipment and weather related factors determine the potential for spray drift. The 
applicator and the grower are responsible for considering all these factors when making decisions. 
 
The following drift management requirements must be followed to avoid off-target movement from 
applications to agricultural field crops. These requirements do not apply to forestry applications, public 
health uses, or to applications of dry materials. Where states have more stringent regulations, they must 
be observed. 
 
Where states have more stringent regulations, they must be observed. 
 
Information On Droplet Size 
The most effective way to reduce drift potential is to apply large droplets. The optimum drift management 
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets 
reduces drift potential, but will not prevent drift when applications are made improperly, or under 
unfavorable environmental conditions (See Wind, Temperature and Humidity, and Temperature 
Inversions). 
 
All aerial and ground application equipment must be properly maintained and calibrated using appropriate 
carriers. 
 
For all non-aerial applications, wind speed must be measured adjacent to the application site, on the 
upwind side, immediately prior to application. 
 
 
Controlling Spray Droplet Size 
 
Volume - Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with higher rated 
flows usually produce larger droplets. 
 
Pressure - Do not use pressures greater than that specified by the nozzle manufacturer. For many nozzle 
types, lower pressure produces larger droplets. When higher flow rates are needed, use higher flow rate 
nozzles instead of increasing pressure. 
 
Number of Nozzles - Use the minimum number of nozzles that provide uniform coverage. 
 
Nozzle Orientation – For aerial application, orient nozzles so that the spray is released parallel to the 
airstream. A parallel orientation results in larger droplets than other orientations and reduces air turbulence 
and the production of small droplets. Significant deflection from horizontal will reduce droplet size and 
increase drift potential.

9 
Nozzle Type - Use a nozzle type that is designed for the intended application. With most nozzle types, 
narrower spray angles produce larger droplets. Consider using low drift nozzles. For aerial applications, 
solid stream nozzles oriented straight back produce the largest droplets and potentially the least drift. 
 
Boom Length - For some aerial use patterns, reducing the effective boom length to less than 3/4 of the 
wingspan or rotor length may further reduce drift without reducing swath width. 
 
Application Height – Making applications at the lowest height that is safe reduces exposure of spray 
droplets to evaporation and wind movement. Aerial applications should not be made at a height greater 
than 10 feet above the top of the target plants unless a greater height is required for aircraft safety. 
 
Swath Adjustment - Swath adjustment distance must increase, with increasing drift potential (higher wind, 
smaller drops, etc.). 
 
Drift Reduction Technology (DRT) - The EPA Drift Reduction Technology (DRT) Program was 
developed to encourage the manufacture, marketing, and use of spray technologies scientifically verified 
to significantly reduce pesticide drift. The use of DRTs should result in significantly less pesticide from 
spray applications drifting and being deposited in areas not targeted by those applications, compared to 
spray technologies that do not meet the minimum DRT standard. EPA-verified drift reduction technologies 
(DRTs) and their ratings will be added to the following webpage as they become available: 
https://www.epa.gov/reducing-pesticide-drift/epa-verified-and-rated-driftreduction-technologies 
 
Wind - Drift potential is lowest between winds speeds of 3 to 10 mph. However, many factors, including 
droplet size and equipment type determine drift potential at any given wind speed. Applications shall be 
avoided below 3 mph due to variable wind direction and high inversion potential. Do not apply F9070-1 
when wind speed exceeds 10 mph. NOTE: Local terrain can influence wind patterns. Every applicator 
shall be familiar with local wind patterns and how they affect spray drift. 
 
Temperature and Humidity - When making applications in low relative humidity, set up equipment to 
produce larger droplets to compensate for evaporation. Droplet evaporation is most severe when 
conditions are both hot and dry. 
 
Temperature Inversions – Do not apply F9070-1 during a temperature inversion because the drift potential 
is high. Temperature inversions restrict vertical air mixing, which causes small suspended droplets to 
remain in a concentrated cloud. This cloud can move in unpredictable directions due to the light variable 
winds common during inversions. Temperature inversions are characterized by increasing temperatures 
with altitude and are common on nights with limited cloud cover and light to no wind. They begin to form 
as the sun sets and often continue into the following morning. Their presence can be indicated by ground 
fog. However, if fog is not present, inversions can also be identified by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. 
 
Shielded Sprayers - Shielding the boom or individual nozzles can reduce the effects of wind. However, it 
is the responsibility of the applicator to verify that the shields are preventing drift and not interfering with 
uniform deposition of the product. 
 
Sensitive Areas – F9070-1 shall only be applied when the wind is blowing away from adjacent sensitive 
areas (e.g. residential areas, bodies of water, known habitats for threatened or endangered species and 
non-target crops).

10 
ALLOWABLE F9070-1 USE INFORMATION 
Refer to the crop section of this label for specific harvest aid product use directions. 
Table 1: 
Maximum Allowable F9070-1 Use Per Acre Per Season for crops 
Total Allowed carfentrazone-ethyl Use Per Season * 
Crop 
 
Maximum Rate 
F9070-1 
(fl oz/A) 
Per Season 
Maximum Rate 
(lb ai/A) 
Per Season 
Corn 2.0 0.031 
Cotton, harvest aid only 3.2 0.05 
Peanut 6.1 0.096 
Potato 11.6 0.181 
Rice, harvest aid only (Non California Rice) 1.5 0.023 
Small Grains 2.0 0.031 
Sorghum 1.0 0.016 
Soybeans 1.5 0.023 
Sugarcane 6.1 0.096 
*The total allowable usage of carfentrazone-ethyl includes all applications made to the field per 
calendar year. This includes fallow treatments, burndown treatments and all in-season treatments, 
including harvest aid. 
 
PREHARVEST INTERVALS 
Refer to the crop section of this label for specific product use directions. 
Table 2: 
Preharvest Intervals (PHI) or Maximum Growth Stage for F9070-1 Applications 
Crop 
 
PHI 
(Days Before Harvest) 
or Growth Stage 
Corn: field, popcorn, sweet corn grown for seed (harvest aid) 3 
Cotton (harvest aid) 7 
Peanut 7 
Potato 7 
Rice (harvest aid) Non California Rice 3 
Small Grains (harvest aid) 3 
Sorghum (harvest aid) 3 
Soybean (harvest aid) 3 
Sugarcane 7 
Wheat 3 
 
CROP ROTATIONAL RESTRICTIONS 
Following an application of F9070-1, a treated field may be rotated to any crop listed on Table 2 at 
any time. All other crops may be planted after 12 months. 
 
Up to 12 months following application to cotton and potato, the subsequent planted crop may only be a 
registered crop.

11 
 
HARVEST AID (WEED CONTROL) 
Timing and Method of Application 
 
Apply F9070-1 to cotton, corn (field corn, popcorn, sweet corn grown for seed), peanuts, potato, soybeans, 
sugarcane and the grain/forage crops (barley, millet, oats, rice, sorghum, triticale, wheat), to defoliate and/or 
desiccate troublesome broadleaf weeds e.g. morningglories, pigweeds and velvetleaf that may be present 
at harvest. Apply F9070-1 alone or as a tank mixture with other harvest aids. Further harvest aid 
instructions or desiccation recommendations can be found in the specific crop sections where appropriate. 
 
Applications shall be made when the crop is mature and the grain has begun to dry down, or according to 
Extension Service guidelines in the use area. 
 
Coverage is essential for satisfactory performance. 
 
Precaution 
If applied as a tank mixture, refer to the other product’s label for restrictions on tank mixing, and observe 
all label precautions, instructions and rotational cropping restrictions. 
 
CORN (field, sweet and popcorn) 
Timing and Method of Application 
 
Harvest Aid Application 
Apply F9070-1 as a broadcast spray at a rate of 1.0-2.0 fl oz/A (0.016 – 0.031 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Apply F9070-1 alone or as a tank mixture with other corn harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 2.0 fl oz/A (0.031 lb ai/A of carfentrazone-ethyl) per season for weed control or as 
a harvest aid treatment. 
Do not feed or graze corn stove for 14 days following treatment. 
 
COTTON 
Timing and Method of Application 
 
Managed Maturity Application for Cotton 
Apply F9070-1 as an aid to remove undesirable top growth and reduce unproductive terminal growth. Use 
alone or as a tank mixture with other cotton insecticides and herbicides. Read all product labels and follow 
all directions and precautions when tank mixing with this product. 
 
Timing 
Apply F9070-1 when cotton is actively growing and the plants have 15% to 25% open bolls; with applications 
at 20% open bolls being optimum. When using the Cotman monitoring program, apply F9070-1 at NAWF5, 
plus 450 – 650 heat units. Avoid Managed Maturity treatments to fields, or areas of fields, that are stressed. 
 
F9070-1 Use Rates 
Apply F9070-1 as a broadcast spray at 1/4 fl oz/A (0.004lb ai/A) to 1/2 fl oz/A (0.008 lb ai/A), targeting 3/8 
fl oz/A (0.006 lb ai/A) in spray volume adequate to obtain upper canopy coverage of the plant foliage. In

12 
situations of extremely lush growth, apply up to 1/2 fl oz/A (0.008 lb ai/A). Make applications using a 
minimum of 10 gallons of finished spray per acre for ground application and a minimum of 5 gallons per 
acre by air. Good upper canopy coverage is essential for optimum performance. Use a quality crop oil 
concentrate (COC) at the recommended rate of 1% v/v. 
 
Defoliation / Harvest Aid Application 
Apply F9070-1 as a harvest aid to defoliate and desiccate cotton and troublesome weeds that may be 
present at harvest. Apply F9070-1 alone or as a tank mixture with other cotton harvest aids. 
Use a quality spray adjuvant e.g. nonionic surfactant (NIS) or crop oil concentrate (COC) at the 
recommended rates. Use NIS adjuvants during warmer periods with COC being the better choice for 
applications during cooler periods. 
Make application when 60 to 70 percent of the bolls are open, or according to the State Agricultural 
Extension Service guidelines in the use area. 
Apply F9070-1 up to 1.6 fl oz/A (up to 0.025 lb ai/A) in spray volume sufficient to provide complete coverage 
of cotton foliage. Use a minimum of 10 gallons of finished spray per acre for ground application and 5 
gallons per acre for aerial application. Coverage is essential for good defoliation. Repeat application if 
necessary to remove remaining foliage or control regrowth. Do not apply more than 3.2 fl oz/A (0.05 lb 
ai/A) total as a harvest aid. Dense cotton canopy, large plant size, and environmental conditions not 
conducive to complete plant coverage may reduce initial application performance and increase the need 
for a second application. 
 
Apply F9070-1 alone, as a tank mix, or as a sequential application alone or tank mixed with other registered 
cotton harvest aid products. 
 
Refer to the other product’s label for restrictions on tank mixing, and observe all label precautions, 
instructions and rotational cropping restrictions. 
 
Restrictions 
Do not apply within 7 days of harvest. 
Do not apply more than 3.2 fl oz/A (0.05 lb ai/A) total for managed maturity and/or as a harvest aid. 
 
PEANUT 
Timing and method of application 
 
Harvest Aid Application 
Apply F9070-1 a rate of 1.0-2.0 fl oz/A (0.016 – 0.031 lb ai/A) in spray volume sufficient to provide complete 
coverage of foliage to defoliate and desiccate troublesome weeds that may be present at harvest. Use a 
minimum of 10 gallons of finished spray per acre by ground and 5 gallons per acre by air. For optimum 
desiccation, make applications 7-10 days prior to harvest. Apply F9070-1 alone or as a tank mixture with 
other peanut harvest aids. 
For up to 12 months following harvest-aid application, the subsequent planted crop may only be a registered 
crop. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a nonionic surfactant (NIS) or crop oil concentrate (COC). Use a 
quality nonionic surfactant (NIS) containing at least 80% active at 0.25% v/v (2 pints NIS per 100 gallons) 
or a crop oil concentrate (COC) at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil 
(MSO). The use of a high quality sprayable liquid nitrogen fertilizer at 2 to 4 % v/v or ammonium sulfate 
(AMS) used at 2 to 4 pounds per acre in addition to the NIS, or MSO or COC is allowed. 
 
Restrictions 
Do not apply within 7-days of harvest. 
Do not apply more than 2.0 fl oz/A (0.031 lb ai/A) per season as a harvest aid treatment. 
Do not apply more than one harvest aid treatment per season. 
Do not apply more than 6.1 fl oz/A (0.096 lb ai/A of carfentrazone-ethyl from all sources) per season. 
Do not feed immature peanut plant or peanut hay to livestock.

13 
Crop Rotation Restriction: After an application of this product to peanuts, you may only rotate the field to a 
carfentrazone-ethyl registered crop. 
 
POTATO 
Timing and method of application 
 
Apply F9070-1 alone or in a tank mix combination with other herbicides and insecticides as a harvest aid 
to desiccate potatoes and those susceptible weeds that may be present. 
 
Harvest Aid Desiccation Application 
Apply F9070-1 as a broadcast spray at a rate of 3.2 to 5.8 fl oz/A (0.05 to 0.09 lb ai/A) per acre or 2.0 – 
5.8 fl oz/A with other registered potato desiccants. Apply F9070-1 foliar to potatoes in the later stages of 
senescence for desiccation of potato foliage and vines. F9070-1 will also desiccate late season susceptible 
broadleaf weeds to aid in tuber harvest. Adequate desiccation is generally achieved within 14 days after 
the initial treatment is applied. If the potato crop is in the active vegetative growth stage when desiccation 
is initiated, two applications may be required to provide desiccation of leaf and stem tissue. Dense potato 
canopy, large plant size, and environmental conditions not conducive to product absorption or activity will 
reduce initial application efficacy and increase the need for a second application. If a second application is 
necessary, apply at 7 to 14 days after the first application. Thorough coverage of the potato plant to be 
desiccated is essential. Use a sufficient volume of water to obtain thorough coverage of the potato leaves 
and vines. 
 
Ground Application 
Apply F9070-1 in at least 20 gallons of water per acre. Vary the spray volume and spray pressure as 
indicated by the density of the potato canopy and vines to assure thorough spray coverage. Increase the 
spray volume and pressure if the potato canopy is dense or under cool, cloudy or dry conditions. Increased 
spray volumes will enhance performance. 
 
Aerial Application 
Apply F9070-1 with aerial equipment using 5 to 10 gallons of water per acre, using higher volumes when 
potato canopies and vines are dense. Adjust the nozzles to provide a uniform pattern and a droplet size of 
350 to 450 microns. 
 
Adjuvant Requirements 
A nonionic surfactant (NIS), methylated seed oil (MSO) or crop oil concentrate (COC) or other suitable 
surfactant mixture is required. Use a nonionic surfactant (NIS) at 0.25% v/v (2 pints per 100 gallons of 
spray solution) having at least 80% active ingredient, or a methylated seed oil, or crop oil concentrate 
(COC)(petroleum or seed oil) at 1 to 2 v/v (1 to 2 gallons per 100 gallons of spray solution. The use of a 
high quality sprayable liquid nitrogen fertilizer at 2 to 4 % v/v (2 to 4 gallons per 100 gallons spray solution) 
or ammonium sulfate (AMS) used at the rate of 2 to 4 pounds per acre in addition to the nonionic surfactant 
methylated seed oil or crop oil is allowed. 
Adjuvant rates should increase as spray volumes exceed 20 gallons per acre. 
 
Tank Mixtures 
Apply F9070-1 as a tank mix or as a sequential application with other potato desiccants. Refer to the other 
product’s label for restrictions on tankmixing, and observe all label precautions, instructions and rotational 
cropping restrictions. 
 
Restrictions 
Do not apply more than 11.6 fl oz/A of F9070-1 (0,18 lb ai/A) per crop season as a desiccant. 
Do not apply within 7 days of harvest. 
Do not apply when conditions that favor drift or wind is above 10 mph.

14 
RICE 
(For Rice Grown in the Southern United States only) 
Timing and Method of Application:. 
 
Harvest Aid Application: 
Apply F9070-1 as a broadcast spray at a rate of 1.0-1.6 fl oz/A (0.016 – 0.023 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Harvest aid treatment applications may be made no earlier than soft dough up to the 3 day PHI. 
Apply F9070-1 alone or as a tank mixture with other small rice harvest aids. 
 
When used as directed, F9070-1 will provide control of listed weeds. 
Table 3. 
Arrowhead, annual Morningglory spp. 
Jointvetch, Indian Sesbania, hemp 
Jointvetch, northern 
 
Suppression of listed weeds up to 4 inches. 
Alligatorweed Ducksalad 
Ammannia, purple Flatsedge, rice 
Dayflower, spreading Texasweed 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 1.6 fl oz/A (0.023 lb ai/A of carfentrazone-ethyl) per season as a harvest aid 
treatment. 
Do not apply when conditions that favor drift or wind is above 10 mph. 
 
SMALL GRAIN (barley, millet, oats, triticale) 
Timing and Method of Application 
 
Harvest Aid Application 
Apply F9070-1 as a broadcast spray at a rate of 1.0-2.0 fl oz/A (0.016 – 0.031 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Apply F9070-1 alone or as a tank mixture with other small grain harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 2.0 fl oz/A (0.031 lb ai/A of carfentrazone-ethyl) per season for weed control or as 
a harvest aid treatment.

15 
SORGHUM (Grain and Forage) 
Timing and Method of Application 
 
Harvest Aid Application 
Apply F9070-1 as a broadcast spray at a rate of 1.0 fl oz/A (0.016 lb ai/A) in spray volume sufficient to 
provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre by ground 
and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to harvest. 
Apply F9070-1 alone or as a tank mixture with other sorghum harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 1.0 fl oz/A (0.016 lb ai/A of carfentrazone-ethyl) per season for weed control or as 
a harvest aid treatment. 
Do not make foliar broadcast applications of F9070-1 to forage or sorghum grown for seed. 
Do not apply when conditions that favor drift or wind is above 10 mph. 
 
SOYBEAN 
Timing and Method of Application 
 
Harvest Aid Application 
Apply F9070-1 as a broadcast spray at a rate of 1.0-1.5 fl oz/A (0.016 – 0.023 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Apply F9070-1 alone or as a tank mixture with other soybean harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 1.5 fl oz/A (0.023 lb ai/A of carfentrazone-ethyl from all sources) per season for 
weed control or as a harvest aid treatment. 
Do not feed treated soybean forage or soybean hay to livestock. 
 
SUGARCANE 
Timing and method of application 
 
Harvest Aid Application: 
 
Apply F9070-1 as a broadcast spray at a rate of 1.0-2.0 fl oz/A (0.016 – 0.031 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Apply F9070-1 alone or as a tank mixture with other sugarcane harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a nonionic surfactant (NIS) or crop oil concentrate (COC). Use a 
quality nonionic surfactant (NIS) containing at least 80% active at 0.25% v/v (2 pints NIS per 100 gallons) 
or a crop oil concentrate (COC) at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil

16 
(MSO). The use of a high quality sprayable liquid nitrogen fertilizer at 2 to 4 % v/v or ammonium sulfate 
(AMS) used at 2 to 4 pounds per acre in addition to the NIS, or MSO or COC is allowed. 
 
Restrictions 
Do not apply within 7-days of harvest. 
Do not apply more than 2.0 fl oz/A (0.031 lb ai/A) per season as a harvest aid treatment. 
Do not apply more than one harvest aid treatment per season. 
Do not apply more than 6.1 fl oz/A (0.096 lb ai/A of carfentrazone-ethyl from all sources) per season. 
 
WHEAT 
Timing and Method of Application 
 
Harvest Aid Application 
 
Apply F9070-1 as a broadcast spray at a rate of 1.0-2.0 fl oz/A (0.016 – 0.031 lb ai/A) in spray volume 
sufficient to provide complete coverage of foliage. Use a minimum of 10 gallons of finished spray per acre 
by ground and 5 gallons per acre by air. For optimum desiccation, make applications 7-10 days prior to 
harvest. Apply F9070-1 alone or as a tank mixture with other small grain harvest aids. 
 
Adjuvant Requirements 
Control is enhanced with the addition of a crop oil concentrate (COC). Use a crop oil concentrate (COC) 
at 1% v/v (one gallon COC per 100 gallons), or a methylated seed oil (MSO). The use of ammonium sulfate 
(AMS) at 2 to 4 pounds per acre in addition to the COC or MSO is allowed. 
 
Restrictions 
Do not apply within 3-days of harvest. 
Do not apply more than 2.0 fl oz/A (0.031 lb ai/A of carfentrazone-ethyl from all sources) per season for 
weed control or as a harvest aid treatment. 
Do not apply when conditions favoring drift exist. 
 
 
TERMS OF SALE OR USE AND LIMITATION OF WARRANTY AND LIABILITY 
Terms of Sale and/or Use 
On purchase of this product buyer and user agree to the terms and conditions as follow. 
 
Packaging 
Distributors/Dealers/Retailers shall sell in original packages only. 
 
Warranty 
FMC warrants that this product conforms to the chemical description on the label and is reasonably fit for 
the purposes stated in the Directions for Use section when used in accordance with the directions under 
normal conditions of use. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, FMC MAKES NO 
WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY 
OTHER EXPRESS OR IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR 
USE OF THIS PRODUCT. Any warranties, express or implied, having been made are inapplicable if this 
product has been used contrary to label instructions, or under abnormal conditions, or under conditions not 
reasonable foreseeable to (or beyond the control of seller or FMC), and buyer assumes the risk of any such 
use. 
 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risk 
inherently associated with the use of this product. Crop injury, ineffectiveness, or other unintended 
consequences may result because of such factors as manner of use or application, weather or crop 
conditions beyond the control of FMC of Seller. To the extent consistent with applicable law, all such risks 
shall be assumed by Buyer and User, and Buyer and User agree to hold FMC and Seller harmless for any 
claims relating to such factors.

17 
Use of Product 
FMC’s recommendations for the use of this product are based upon tests believed to be reliable. The use 
of this product being beyond the control of the manufacturer, no guarantee, expressed or implied is made 
as to the effects of such or the results to be obtained if not used in accordance with directions or established 
safe practice. 
 
DISCLAIMER 
FMC Corporation intends that F9070-1 be distributed only to end users and/or growers (and/or applicators 
acting on the behalf of growers), who agree to the terms and conditions as stated herewith and further 
agree to a waiver and release from any and all liability by the user and/or grower of FMC for failure to 
perform and/or crop damage resulting from the use of F9070-1 as recommended on the labeled crops 
under those specific sections of this label. If such terms and conditions are unacceptable, FMC requests 
the return at once of all products in unopened original containers. FMC considers the user to have accepted 
such terms and conditions upon the use of F9070-1. 
 
F9070-1, when used as directed, may result in crop injury, crop loss or crop damage. FMC recommends 
that the user and/or grower test F9070-1 in order to determine its suitability for the intended use. FMC 
makes F9070-1 available to the user and/or grower solely to the extent that the benefit and utility, in the 
sole opinion of the user and/or grower, outweigh the extent of potential injury associated with the use of 
F9070-1. The decision to use, or not to use, F9070-1 must be made by each individual user and/or grower 
on the basis of possible crop injury from F9070-1, the severity of weed infestations, the cost of alternative 
weed control measures and other factors. Because of the risk of crop damage, all such use is at the user 
and/or grower’s risk. 
 
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, FMC OR SELLER SHALL NOT BE LIABLE 
FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM THE USE OF 
OR HANDLING OF THIS PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND 
SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED 
ON BREACH OF WARRANTY, CONTRACT, NEGL IGENCE, TORT, STRICT LIABILITY OR 
OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR AT THE ELECTION OF FMC OR SELLER, 
THE REPLACEMENT OF THE PRODUCT. 
 
These TERMS OF SALE OF SALE OR USE AND LIMITATION OF WARRANTY AND LIABILITY may 
not be amended by any oral or written agreement. 
 
 
LABEL TRACKING INFORMATION 
Label Code: D-4842 111523 
 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
215-299-6000 
 
FMC is a trademark of FMC Corporation 
 
 
© 2023 FMC Corporation. All rights reserved.