crop-chem-docs/corpus/epa_ppls/279-9589.md

# ALLY EXTRA HERBICIDE

- EPA Reg No: **279-9589**
- Registrant: FMC CORPORATION 
- Signal word: Caution
- Active ingredients: Metsulfuron-methyl (15%); Thifensulfuron (37.5%); Tribenuron-methyl (18.75%)
- Label accepted: 2020-05-01
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-09589-20200501.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
Amended Under Reregistration and Label Amendment v.20150612 
 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 May 1, 2020 
 
Edward Bockrath 
Product Registration Manager 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
Subject: Registration Review Label Mitigation for Thifensulfuron, Tribenuron and 
Metsulfuron- methyl 
 Product Name: ALLY EXTRA HERBICIDE 
 EPA Registration Number: 279-9589 
 Application Date: 08/29/2018 
 Decision Numbers: 561682, 561686 and 561687 
 
Dear Mr. Bockrath: 
 
The Agency, in accordance with the Federal Insecticide, Fungicide and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all of the information submitted with your 
application to support the Registration Review of the above referenced product in connection 
with the Sulfonylurea (SU) Herbicides Interim Decision, and has concluded that your submission 
is acceptable. The agency also completed review of your amended label referred to above, 
submitted in connection with registration under FIFRA, as amended, and has determined the 
label is also acceptable. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
A copy of your label stamped “Accepted” is enclosed. Products shipped after 12 months from the 
date of this amendment must bear the new revised label. Your release for shipment of the 
product bearing the amended label constitutes acceptance of these conditions. If these conditions 
are not complied with, the registration will be subject to cancellation in accordance with FIFRA 
section 6.

Page 2 of 2 
EPA Reg. No. 279-9589 
Decision No. 561682, 561686 and 561687 
 
If you have any questions about this letter, please contact Srijana Shrestha by phone at 703-305-
6471, or via email at Shrestha.srijana@epa.gov
. 
 
Sincerely, 
 
 
 Linda Arrington, Branch Chief 
 Risk Management and Implementation Branch 4 
 Pesticide Re-Evaluation Division 
 Office of Pesticide Programs 
 
 
Enclosure

HERBICIDE
 
 ALLY® 
EXTRA 
For Use on Wheat, Barley, Triticale and Fallow.
Active Ingredients By Weight
Thifensulfuron methyl
Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl) amino]carbonyl]amino]-sulfonyl]-2-thiophenecarboxylate 37.50% 
Tribenuron methyl
Methyl 2-[[[[N-(4-methoxy-6-methyl-1,3,5-triazin-2-yl)methylamino]carbonyl]-amino]sulfonyl]benzoate 18.75%
Metsulfuron methyl
Methyl 2-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino]-sulfonyl]benzoate 15.00%
Other Ingredients 28.75%
TOTAL
Contains 0.1500 lb Metsulfuron Methyl per pound 
Contains 0.3750 lb Thifensulfuron Methyl perpound
EPA Est. No.
100%
Contains 0.1875 lb Tribenuron Methyl perpound Nonrefillable Container OR Refillable Container
EPA Reg. No. 279-9589 Net: Net: 
Sold By
FMC Corporation 
2929 Walnut Street
Philadelphia, PA 19104
METSULFURON METHYL GROUP 2 HERBICIDE
THIFENSULFURON METHYL GROUP 2 HERBICIDE
TRIBENURON METHYL GROUP 2 HERBICIDE
KEEP OUT OF REACH OFCHILDREN
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this l abel, 
find someone to explain it to you in detail.)
FIRST AID
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after
the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin with plenty of water for 15-20 minutes. Call a 
poison control center or doctor for treatment advice.
Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may 
also contact 1-800-331-3148 for emergency medical treatment information.
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION! Causes moderate eye irritation. Harmful if absorbed through skin. Avoid contact with skin, eyes, or clothing. Wash 
thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.
ALLY® EXTRA herbicide is a dry flowable granule that is used for selective postemergence weed control in wheat 
(including durum), barley, triticale and fallow.

May 01, 2020
279-9589

PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:
Long-sleeved shirt and long pants.
Chemical Resistant Gloves made of any waterproof material >14 mls.
Shoes plus socks.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent 
and hot water. Keep and wash PPE separately from other laundry.
ENVIRONMENTAL HAZARDS
Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water 
mark. Do not contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate.
Groundwater Advisory
This chemical has properties and characteristics associated with chemicals detected in groundwater. This chemical may 
leach into groundwater if used in areas where soils are permeable, particularly where the water table is shallow.
Surface Water Advisory
This product may impact surface water quality due to runoff of ra in water. This is especially true for poorly draining soils 
and soils with shallow ground water. This product is clas sified as having high potential for reaching surface water via 
runoff for days after application . A level, well-maintained vegetative buffer strip between areas to which this product is 
applied and surface water features such as ponds, streams, and springs will reduce the potential loading of this product 
from runoff water and sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or 
irrigation is expected to occur within 48 hours.
PESTICIDE HANDLING
• Calibrate sprayers only with clean water away from the wellsite.
• Make scheduled checks of spray equipment.
• Ensure that all operation employees accurately measure pesticides.
• Mix only enough product for the job at hand.
• Avoid overfilling of spray tank.
• Do not discharge excess material on the soil at a single spot in the field, grove, or mixing/loadingstation.
• Avoid storage of pesticides near well sites.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only 
protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the 
agency responsible for pesticide regulation.
Windblown Soil Particles
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion usually have a 
high silt and/or fine to very fine sand fractions and low organic matter content. Other factors which can affect the movement 
of windblown soil include the intensity and direction of prevailing winds, vegetative cover, site slope, rainfall, and drainage 
patterns. Avoid applying this product if prevailing local conditions may be expected to result in off-site movement.
Non-target Organism Advisory
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including
pollinators, in areas adjacent to the treated area. Protect the forage and habitat of non-target organisms by minimizing spray 
drift. For further guidance and instructions on how to minimize spray drift, refer to the Spray Drift Management section of 
this label.
USER SAFETY RECOMMENDATIONS
USERS SHOULD: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.


ALLY® EXTRA herbicide must be used only in accordance with instructions on this label or in supplemental FMC 
publications.
FMC will not be responsible for losses or damages resulting from the use of this product in any manner not specified by FMC.
ALLY EXTRA herbicide is for use on wheat, barley, triticale and fallow in most states, check with your state extension 
service or Department of Agriculture before use, to be certain ALLY EXTRA herbicide is registered in your state. ALLY 
EXTRA herbicide is not registered for use in Alamosa, Conejos, Costilla, Rio Grande, and Saquache counties of Colorado 
unless use is directed otherwise by supplemental labeling.
PRODUCT INFORMATION
ALLY EXTRA herbicide is a dry flowable granule that is used for selective postemergence weed control in wheat (including 
durum), barley, triticale and fallow.
The best control is obtained when ALLY EXTRA herbicide is applied to young, actively growing weeds. The degree and 
duration of control may depend on the following:
• weed spectrum and infestation intensity
• weed size at application
• environmental conditions at and following treatment
ALLY EXTRA herbicide is noncorrosive, nonflammable, nonvolatile, and does not freeze. ALLY EXTRA herbicide should be 
mixed in water and applied as a uniform broadcast spray (See Tank Mixtures and Mixing Instructions sections for use with 
Liquid Nitrogen Fertilizer Solutions).
ENVIRONMENTAL CONDITIONS AND BIOLOGICAL ACTIVITY
ALLY EXTRA herbicide is absorbed through the roots and foliage of plants, rapidly inhibiting the growth of susceptible 
weeds. One to three weeks after postemergence application to weeds (2 to 5 weeks for wild garlic), leaves of susceptible 
plants appear chlorotic, and the growing point subsequently di es. In warm, moist conditions, the expression of herbicide 
symptoms is accelerated; in cold, dry conditions, expression of herbicide symptoms is delayed.
ALLY EXTRA herbicide will provide up to 4 to 6 weeks of residual weed control. Susceptible weeds may germinate and 
emerge a few days after postemergence applications, but growth then ceases and leaves become chlorotic 3- 5 days after 
emergence. Death of leaf tissue and growing point will follow in some species, while others will remain green but stunted and
noncompetitive.
ALLY EXTRA herbicide provides the best control of weeds in vigorously growing crops that shade competitive weeds. 
Weed control in areas of thin crop stand or seeding skips may not provide satisfactory control. However, a crop canopy that is
too dense at application can intercept spray and reduce weed control.
The herbicidal action of ALLY EXTRA herbicide may be less effective on weeds stressed from adverse environmental 
conditions (such as extreme temperatures or moisture), abnormal soil conditions, or cultural practices. In addition, weeds 
hardened-off by drought stress are less susceptible to ALLY EXTRA herbicide.
PRODUCT MEASUREMENT
ALLY EXTRA herbicide can be measured using the ALLY EXTRA herbicide volumetric measuring cylinder included in the 
case. The degree of accuracy of this cylinder varies by ± 7.5%. For more precise measurement, use scales calibrated in 
ounces.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This 
Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and 
handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency 
assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal 
protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product 
that are covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during th e restricted entry interval (REI) of 12 hours. PPE required 
for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with 
anything that has been treated, such as plants, soil, or water, is:
Coveralls.
Chemical Resistant Gloves made of any waterproof material >14 mls. 
Shoes plus socks.


RATE CONVERSION CHART FOR ALLY EXTRA HERBICIDE
Ounces of 
ALLY EXTRA herbicide/A
Pounds of 
ALLY EXTRA herbicide /A Active Ingredient
Pounds of Active 
Ingredient/A
0.2 0.0125
Thifensulfuron methyl 0.0047
Tribenuron methyl 0.0023 
Metsulfuron methyl 0.0019
0.21 0.0131
Thifensulfuron methyl 0.0049
Tribenuron methyl 0.0020
Metsulfuron methyl 0.0027
0.3 0.0188
Thifensulfuron methyl 0.0070
Tribenuron methyl 0.0035
Metsulfuron methyl 0.0028
0.31 0.0194
Thifensulfuron methyl 0.0073
Tribenuron methyl 0.0036
Metsulfuron methyl 0.0029
0.4 0.025
Thifensulfuron methyl 0.0094
Tribenuron methyl 0.0047 
Metsulfuron methyl 0.0038 
LABELLED USES
ALLY EXTRA herbicide provides selective postemergence control of certain broadleaf weeds in wheat (including durum), 
barley, triticale, and fallow.
Fallow 
Application and Use Rate Information
Use Rates (oz of
ALLY Extra 
herbicide per acre)
Active 
Ingredient
Pounds of Active Ingredient 
per acre
Apply in the spring or fall when the majority of 
weeds have emerged and are actively growing.
Apply 0.2 to 0.4 oz/A of ALLY EXTRA 
herbicide to fallow fields.
ALLY EXTRA herbicide should be applied 
in combination with other suitable registered 
fallow herbicides (See TANK MIXTURES 
for additional information)
0.2 to 0.4
Thifensulfuron 
methyl
0.0047 to 0.0094
Tribenuron 
methyl
0.0023 to 0.0047 
Metsulfuron 
methyl
0.0019 to 0.0038
RESTRICTIONS in Fallow: 
• ALLY EXTRA herbicide is only registered for use on wheat, barley, triticale and fallow. DO NOT use on any other crop.
• DO NOT use less than 0.2 oz/A ALLY EXTRA herbicide.
• DO NOT apply more than 0.4 oz/A of ALLY EXTRA herbicide in a single application (maximum active ingredient per
single application is 0.0094 lb/A thifensulfuron methyl, 0.0047 lb/A tribenuron methyl, and 0.0038 lb/A metsulfuron
methyl).
• DO NOT apply more than 0.4 oz/A of ALLY EXTRA herbicide per year (maximum active ingredient per year of product is
0.0094 lb/A thifensulfuron methyl, 0.0047 lb/A tribenuron methyl, and 0.0038 lb/A metsulfuron methyl).


TANK MIXTURES IN FALLOW
ALLY EXTRA herbicide may be used as a fallow treatment an d should be tank mixed with other herbicides that are 
registered for use in fallow. Read and follow all manufacturers’ label instructions for the companion herbicide. If those 
instructions conflict with this label, DO NOT tank mix the herbicide with ALLY EXTRA herbicide.
Wheat (Including Durum), Barley, and Triticale 
Application and Use Rate Information
Use Rates (oz of 
ALLY Extra 
herbicide per acre)
Active 
Ingredient
Pounds of Active 
Ingredient per acre
Apply ALLY EXTRA herbicide at the rate of 
0.2 to 0.4 oz/A to wheat, barley, triticale or 
fallow.
Use 0.4 oz/A of ALLY EXTRA herbicide for 
heavy infestation of the weeds listed under 
Weeds Partially Controlled when application 
timing and environmental conditions are 
marginal (refer to Biological Activity and 
Environmental Conditions section of this 
label for best performance).
Use 0.2 to 0.3 oz/A of ALLY EXTRA 
herbicide for light infestation of the weeds 
listed under Weeds Controlled. Conditions at 
application should be optimum for effective 
treatment of these weeds.
Note: See Tank Mix Section for additional info 
on required combinations when used at less 
than 0.4 oz/A.
0.2 to 0.4
Thifensulfuron 
methyl 0.0047 to 0.0094
Tribenuron 
methyl 0.0023 to 0.0047 
Metsulfuron 
methyl 0.0019 to 0.0038
RESTRICTIONS in Wheat (including durum), Barley, and Triticale:
• ALLY EXTRA herbicide is only registered for use on wheat, barley, triticale and fallow. DO NOT use on any
other crop.
• DO NOT apply to wheat, barley, or triticale crops undersown with legumes and grasses, because injury to the
forages will result.
• DO NOT harvest sooner than 45 days after the last application of ALLY EXTRA herbicide.
• DO NOT use less than 0.2 oz/A ALLY EXTRA herbicide.
• DO NOT apply more than 0.4 oz/A of ALLY EXTRA herbicide in a single application (maximum active
ingredient per single application is 0.0094 lb/A thifensulfuron methyl, 0.0047 lb/A tribenuron methyl, and 0.0038
lb/A metsulfuron methyl).
• DO NOT apply more than 0.4 oz/A of ALLY EXTRA herbicide per year (maximum active ingredient per year
of product is 0.0094 lb/A thifensulfuron methyl, 0.0047 lb/A tribenuron methyl, and 0.0038 lb/A metsulfuron
methyl).
• PHI is 7 days for forage, 30 days for hay, and 45 days for wheat, barley and triticale.
PRECAUTIONS in Wheat (including durum), Barley, and Triticale:
Carefully observe all sprayer cleanup instructions both prior to and after using this product, as spray tank residue may damage 
crops other than wheat, barley, or triticale.
ALLY EXTRA herbicide should not be applied to wheat, barley or triticale that is stressed by severe weather conditions, 
drought, low fertility, water-saturated soil, disease, or insect damage, as crop injury may result. Risk of injury is greatest when 
crop is in the 2 to 5- leaf stage. Severe winter stress, drought, disease, or insect damage following application also may result 
in crop injury.
Varieties of wheat (including durum), barley and triticale may differ in their response to various herbicides. FMC 
recommends that you first consult your state experiment station, university, or extension agent as to sensitivity to any 
herbicide. If no information is available, limit the initial use of ALLY EXTRA herbicide to a small area.


APPLICATION TIMING
Fallow
- Apply in the spring or fall when the majority of weeds have emerged and are actively growing.
Wheat (except Durum and Wampum varieties of Spring Wheat), Barley and Triticale
- DO NOT harvest sooner than 45 days after the last application of ALLY EXTRA herbicide.
- Make applications after the crop is in the 2-leaf stage, but before the flag leaf is visible.
Durum and Wampum Variety Spring Wheat
- Make applications after the crop is tillering but before boot. Applications to durum and wampum varieties should be
made in combination with 2,4-D.
- Weed control may be reduced if rainfall or snowfall occurs soon after application. Six hours of dry weather are needed
to allow ALLY EXTRA herbicide to be sufficiently absorbed by weed foliage.
- If applied to irrigated wheat, barley or triticale the first post-treatment irrigation should be delayed for at least 6 hours
after treatment and should not exceed 1 in. of water.
- DO NOT apply ALLY EXTRA herbicide to stressed crops, as this may cause crop injury. To reduce the potential of
crop injury, tank mix ALLY EXTRA herbicide with 2,4-D (ester formulations perform best-see TANK MIXTURES)
and apply after the crop is in the tillering stage of growth.
- Rainfall immediately after treatment can wash ALLY EXTRA herbicide off of weed foliage, resulting in reduced weed
control. DO NOT apply ALLY EXTRA herbicide when rainfall is threatening.
- Add a FMC-recommended, nonionic surfactant having at least 80% active ingredient strength at 0.125 to 0.25% v/v
(1 pt to 1 qt per 100 gal of spray solution).
- Antifoaming agents may be needed. Consult your Ag dealer, applicator, or FMC representative for a listing of
recommended surfactants.
WEEDS CONTROLLED
ALLY EXTRA herbicide effectively controls the following weeds when used according to label directions:
Annual knawel 
Annual sowthistle 
Black mustard 
Blue/Purple mustard * 
Broadleaf dock
Bur buttercup (testiculate)
Bushy wallflower/
Treacle mustard 
Canada thistle* 
Carolina geranium 
Clasping pepperweed
Coast fiddleneck (tarweed) 
Common buckwheat 
Common chickweed 
Common cocklebur 
Common mallow 
Common Purslane 
Common radish
Common ragweed 
Common sunflower * 
Conical Catchfly 
Corn chamomile
Corn gromwell * 
Corn spurry 
Cowcockle
Cress (mouse-ear)
Curly dock
Cutleaf eveningprimrose 
False chamomile
Field chickweed
Field pennycress (fanweed) 
Filaree (redstem, Texas) 
Flixweed *
Groundsel (common) 
Henbit
Kochia‡
Knotweed (prostrate) * 
Lambsquarter (common, slimleaf) 
London rocket
Marshelder 
Mayweed chamomile 
Miners lettuce
Narrowleaf lambsquarters 
Nightflowering catchfly 
Pennsylvania smartweed 
Pigweed (prostrate, redroot,
smooth, tumble) 
Pineappleweed 
Plains coreopsis
Prickly lettuce‡ 
Redmaids 
Russian thistle ‡
Scentless chamomile /mayweed 
Shepherd's-purse
Smallflower buttercup 
Smallseed falseflax 
Smartweed (green,
ladysthumb, pale) 
Snow Speedwell 
Sticky chickweed
Stinking mayweed /dogfennel
Swinecress 
Tansymustard * 
Tarweed fiddleneck
Tumble/ Jim Hill mustard 
Volunteer lentils 
Volunteer peas
Volunteer sunflower 
Waterpod
Wild buckwheat * 
Wild chamomile 
Wild garlic * 
Wild mustard 
Wild radish *


WEEDS PARTIALLY CONTROLLED**
ALLY EXTRA herbicide partially controls the following weeds when used according to label directions:
Catchweed bedstraw 
Mallow (little)
Nightshade (cutleaf, hairy) 
Sowthistle (annual) *
Tall waterhemp
Vetch* (common, hairy)
* See the Specific Weed Problems section of this label for more information.
**Partial control: A visual reduction of weed population as we ll as a significant loss of vigor. For better results, use the hi ghest labeled rate
of ALLY EXTRA herbicide and include a tank mix partner such as 2,4-D, MCPA, bromoxynil (including Buctril® herbicide, Bronate®
herbicide or Bronate Advanced™ herbicide) or dicamba (including Banvel® herbicide/ Clarity® herbicide), refer to the Tank Mixtur es 
section of this label.
‡ Naturally occurring resistant biotypes of kochia, prickly lettuce and Russian thistle are known to occur. See the Tank Mixtures and Specific 
Weed Problems sections of this label for additional details.
TANK MIXTURES
ALLY EXTRA herbicide may be tank mixed with other suitable registered herbicides to control weeds listed as partially 
controlled, weeds resistant to ALLY EXTRA herbicide or weeds not listed under Weeds Controlled. Read and follow all 
manufacturers label instructions for the companion herbicide. If those instructions conflict with this label, DO NOT tank mix 
the herbicide with ALLY EXTRA herbicide.
ALLY EXTRA herbicide can also be mixed with registered fungi cides, insecticides, or liquid fertilizer for use on wheat, 
barley and triticale.
To provide best results, ALLY EXTRA herbicide should be tank mixed with another broadleaf herbicide. For best results, use 
2,4-D, or MCPA (preferably ester formulations). See below for use rates of 2,4-D or MCPA.
With 2,4-D (amine or ester) or MCPA (amine or ester)
ALLY EXTRA herbicide can be tank mixed with 2,4-D and MCPA (preferably ester formulations) herbicides for use on 
wheat, barley, triticale and fallow. For best results, add 2,4-D or MCPA herbicides to the tank at 1/8 to 3/8 lb active ingredient 
per acre.
In tank mixes containing 1/8 lb active ingredient 2,4-D or MCPA per acre, add 1 to 2 pt of non-ionic surfactant per 100 gal of 
spray solution; in tank mixes containing 1/4 to 3/8 lb active ingredient 2,4-D or MCPA per acre, add 1 pt of non-ionic 
surfactant per 100 gal of spray solution. Higher rates of 2,4-D or MCPA may be used, but DO NOT exceed the highest rate 
allowed by those respective labels.
Always mix ALLY EXTRA herbicide in water prior to adding 2,4-D or MCPA and add the surfactant last. Read and follow 
all label instructions on timing, precautions, and warnings for these herbicides before using these tank mixtures.
With 2,4-D or MCPA (amine or ester) and dicamba (including Banvel® herbicide/Clarity® herbicide)
ALLY EXTRA herbicide may be applied in a 3-way tank mix with formulations of dicamba (including Banvel® herbicide/ 
Clarity® herbicide) and 2,4-D or MCPA. Observe all applicable directions, restrictions and precautions on labels of all 
products used.
Make applications of ALLY EXTRA herbicide + 1.0-1.5 oz active dicamba (including Banvel® herbicide/ Clarity®
herbicide) + 1/4 to 3/8 lb active ingredient of 2,4-D or MC PA (ester or amine) per acre. Use higher rates when weed 
infestation is heavy. Add 1-2 pt of nonionic surfactant to the 3-way mixture, where necessary, as deemed by local guidance. 
Use of additional nonionic surfactant may not be needed with the higher phenoxy rates and ester phenoxy formulations. 
Consult the specific 2,4-D or MCPA and dicamba labels, or local guidance for more information.
Apply this 3-way combination to winter wheat after the crop is tillering and prior to jointing (first node). In Spring Wheat 
(including Durum), apply after the crop is tillering and before it exceeds the 5-leaf stage.
DO NOT apply this 3-way mixture at high rates more than once a year or more than twice per year at the low rates.
With Bromoxynil containing products (including Buctril® herbicide, Bronate® herbicide or Bronate Advance™ herbicide)
ALLY EXTRA herbicide may be tank mixed with bromoxynil containing herbicides registered for use on wheat, barley, 
triticale or fallow. For best results, add bromoxynil-containing herbicides to the tank at 3 to 6 oz active ingredient per acre 
(including Bronate® herbicide at 3/4 - 1 1/2 pt per acre).
Tank mixes of ALLY EXTRA herbicide plus bromoxynil may result in reduced control of Canada thistle.
Read and follow all label instructions on timing, precautions, and warnings for these herbicides before using these tank 
mixtures. Follow the most restrictive labeling.
With fluroxypyr containing products (including “STARANE®” brands) 
For improved control of Kochia (2-4” tall) ALLY EXTRA herbicide may be tank mixed with fluroxypyr containing products.
Refer to the FMC herbicide label and the “Starane®” branded product labels for information regarding use restrictions, 
labeled crops, rotational cropping intervals, sprayer cleanup, use precautions and other information. The most restrictive 
provisions on either label will apply. DO NOT use the tank mix if any restriction on the labels conflict with instructions on th e 
FMC herbicide label.
2,4-D and MCPA herbicides (preferably ester formulations) may be tank mixed with ALLY EXTRA herbicide plus 
fluroxypyr, consult local guidance and the Tank Mixtures section of this label for additional information.


With Maverick® herbicide
ALLY EXTRA herbicide can be tank mixed with Maverick® herbicide for improved control of weeds in wheat.
Refer to the Maverick® label for information regarding use restrictions, labeled crops, rotational cropping intervals, sprayer 
cleanup, use precautions and other information. The most restrictive provisions on either label will apply. DO NOT use the 
tank mix if any restrictions on the Maverick® herbicide label conflict with instructions on the FMC herbicide label.
With Aim® herbicide
ALLY EXTRA herbicide can be tank mixed with Aim® herbicide for improved control of weeds in wheat, barley and triticale.
Refer to the Aim® herbicide label for information regarding us e restrictions, labeled crops, rotational cropping intervals, 
sprayer cleanup, use precautions and other information. The most restrictive provisions on either label will apply. DO NOT
use the tank mix if any restrictions on the Aim® herbicide label conflict with instructions on the FMC herbicide label.
With Stinger® herbicide or Curtail® herbicide or Curtail® M herbicide or WideMatch® herbicide 
ALLY EXTRA herbicide can be tank mixed with Stinger® herbicide, Curtail® herbicide, Curtail® M herbicide, or 
WideMatch® herbicide for improved control of weeds in wheat, ba rley and triticale. Refer to the Stinger® herbicide, Curtail® 
herbicide, Curtail® M herbicide, and WideMatch® herbicide labels for information regarding use restrictions, labeled crops, 
rotational cropping intervals, sprayer cleanup, use precautions and other information. The most restrictive provisions on eithe r 
label will apply. DO NOT use the tank mix if any restrictions on the Stinger® herbicide or Curtail® herbicide or Curtail® M 
herbicide or WideMatch® herbicide labels conflict with instructions on the FMC herbicide label.
With Puma® 1EC herbicide
ALLY EXTRA herbicide can be tank mixed with Puma® 1EC herbicide for improved control of weeds in wheat, barley and 
triticale. Refer to the Puma® 1EC herbicide label for information regarding use restrictions, labeled crops, rotational cropping 
intervals, sprayer cleanup, use precautions and other information. The most restrictive provisions on either label will apply. 
DO NOT use the tank mix if any restrictions on the Puma® 1EC herbicide label conflict with instructions on the FMC 
herbicide label.
With Discover® NG herbicide
ALLY EXTRA herbicide can be tank mixed with Discover® NG herbicide for improved control of weeds in spring wheat. 
Refer to the Discover® NG herbicide label for information regarding use restrictions, labeled crops, rotational cropping 
intervals, sprayer cleanup, use precautions and other information. The most restrictive provisions on either label will apply. 
DO NOT use the tank mix if any restrictions on the Discover® NG herbicide label conflict with instructions on the FMC 
herbicide label.
With “Everest®” branded herbicides
ALLY EXTRA herbicide can be tank mixed with “Everest®” branded herbicides for improved control of weeds in spring 
wheat. Refer to the “Everest®” branded product label for information regarding use restrictions, labeled crops, rotational 
cropping intervals, sprayer cleanup, use precautions and other information. The most restrictive provisions on either label will 
apply. DO NOT use the tank mix if any restrictions on the “Everest®” branded product label conflict with instructions on the 
FMC herbicide label.
With Other Herbicides
ALLY EXTRA herbicide may be tank mixed with other suitable registered cereal or fallow herbicides to control weeds listed 
as suppressed, weeds resistant to ALLY EXTRA herbicide, or weeds not listed under Weeds Controlled. Read and follow all 
manufacturer’s label instructions for the companion herbicide. If those instructions conflict with this label, DO NOT tank mix
the herbicide with ALLY EXTRA herbicide. Tank mixes of ALLY EXTRA herbicide plus metribuzin may result in reduced 
control of wild garlic.
DO NOT tank mix ALLY EXTRA herbicide with Hoelon® 3EC herbicide, because grass control may be reduced.
With Fungicides
ALLY EXTRA herbicide may be tank mixed or used sequentially with fungicides registered for use on cereal crops.
With Insecticides
ALLY EXTRA herbicide may be tank mixed or used sequentiall y with insecticides registered for use on cereal crops. 
However, under certain conditions (drought stress, or if the crop is in the 2-4 leaf stage), tank mixes or sequential applicati ons 
of ALLY EXTRA herbicide with organophosphate insecticides may produce temporary crop yellowing or, in severe cases, 
crop injury. The potential for crop injury is greatest when wide fluctuations in day/night temperatures occur just prior to or
soon after application. Test these mixtures in a small area before treating large areas.
DO NOT apply ALLY EXTRA herbicide within 60 days of crop emergence where an organophosphate insecticide has been 
applied as an in-furrow treatment, because crop injury may result.
DO NOT use ALLY EXTRA herbicide plus malathion containing products, as crop injury may result.


With Liquid Nitrogen Fertilizer Solution
Liquid nitrogen fertilizer solutions (e.g., 28-0-0, 32-0-0) may be used as a carrier in place of water. Run a tank mix 
compatibility test before mixing ALLY EXTRA herbicide in fertilizer solution.
ALLY EXTRA herbicide must first be slurried with water and then added to liquid nitrogen solutions. Ensure that the agitator 
is running while the ALLY EXTRA herbicide is added. Use of this mixture may result in temporary crop yellowing and 
stunting.
If using low rates of liquid nitrogen fertilizer in the spray solution (less than 50% of the spray solution volume), the additi on 
of surfactant is necessary. Add surfactant at 1/2 pt -1 qt pe r 100 gal of spray solution (0.06 -0.25% v/v) based on local 
guidance.
When using high rates of liquid nitrogen fertilizer in the spray solution, adding surfactant increases the risk of crop injury. If 
2,4-D or MCPA is included with ALLY EXTRA herbicide and fertilizer mixture, ester formulations tend to be more 
compatible (See manufacturer’s label). Additional surfactant may not be needed when using ALLY EXTRA herbicide in tank 
mix with 2,4-D ester or MCPA ester and liquid nitrogen fertilizer solutions. Consult your agricultural dealer, consultant, fiel d 
advisor, or FMC representative for specific instructions before adding an adjuvant to these tank mixtures.
Note: In certain areas east of the Mississippi river unacceptable crop response may occur with use of straight or dilute nitrog en 
fertilizer carrier solutions wher e cold temperatures or widely fluctuating day/night temperatures exist. In these areas consult 
your agricultural dealer, consultant, field advisor, or FMC re presentative for specific instructions before using nitrogen 
fertilizer carrier solutions.
DO NOT use low rates of liquid fertilizer as a substitute for a surfactant. 
DO NOT use with liquid fertilizer solutions with a pH less than 3.0.
SPECIFIC WEED PROBLEMS
Note: Thorough spray coverage of all weed species listed below is very important.
Blue Mustard and Tansymustard: For best results, use 0.3-0.4 oz/A and apply ALLY EXTRA herbicide in tank mixtures 
with 2,4-D or MCPA postemergence to mustards, but before bloom (refer to Tank Mixtures section of this label for 
additional details).
Flixweed: For best results, use 0.3-0.4 oz/A and apply ALLY EXTRA herbicide in tank mixtures with 2,4-D or MCPA 
postemergence, but before bloom (refer to Tank Mixtures section of this label for additional details).
Canada Thistle: For best results, use 0.4 oz/A and apply ALLY EXTRA herbicide plus 2,4-D, or MCPA, or dicamba 
(including Banvel® herbicide/ Clarity® herbicide) (refer to Tank Mixtures for additional details) in the spring after the 
majority of thistles have emerged and are small (rosette stage to 6” elongating stems) and actively growing. The application 
will inhibit the ability of emerged thistles to compete with the crop.
Sowthistle: For best results, use 0.4 oz/A and apply either ALLY EXTRA herbicide plus surfactant or ALLY EXTRA plus 
2,4-D or MCPA (refer to Tank Mixtures section of this label for additional details) in the spring after the majority of 
sowthistles have emerged and are small (rosette stage to 6” elongating stems) and actively growing.
Corn Gromwell: For best results, use 0.3-0.4 oz/A and apply ALLY EXTRA herbicide when weeds are actively growing, 
are no larger than 2” tall, and when crop canopy will allow thorough coverage. Tank mixing 2,4-D, MCPA, or bromoxynil 
containing products (including Buctril® herbicide, Bronate® herbicide, or Bronate Advanced™ herbicide) with ALLY 
EXTRA herbicide usually improves results (refer to Tank Mixtures section of this label for additional details).
Sunflower (common/volunteer): For best results, use 0.4 oz/A and apply either ALLY EXTRA herbicide plus surfactant or 
ALLY EXTRA herbicide plus 2,4-D or MCPA (refer to Tank Mixt ures section of this label for additional details) after the 
majority of sunflowers have emerged, are 2” to 4” tall and are actively growing. Use spray volumes of at least 3 gal by air.
Prostrate Knotweed: For best results, use 0.4 oz/A and apply ALLY EXTRA herbicide when weeds are actively growing, 
are no larger than 2” tall, and when crop canopy will allow thorough coverage. Tank mixing 2,4-D or MCPA (refer to Tank 
Mixtures section of this label for additional details) with ALLY EXTRA herbicide usually improves results.
Wild Buckwheat: For best results, use 0.3-0.4 oz/A and apply ALLY EXTRA herbicide plus 2,4-D, MCPA, or bromoxynil 
containing products (including Buctril® herbicide, Bronate® herbicide, or Bronate Advanced™ herbicide) when plants have 
no more than three true leaves (not counting the cotyledons). If plants are not actively growing, delay treatment until 
environmental conditions favor active weed growth (refer to Tank Mixtures section of this label for additional details).
Vetch (common and hairy): For best results, use 0.4 oz/A and apply ALLY EXTRA herbicide when vetch is less than 6” in 
length. For severe infestations of vetch, or when vetch is greater than 6” in length, use ALLY EXTRA herbicide in 
combination with 2,4- D, or MCPA (refer to Tank Mixtures section of this label for additional details).
Wild garlic: For best results, use 0.4 oz/A and apply ALLY EXTRA herbicide when wild garlic plants are less than 12” tall 
with 2” to 4” of new growth. Plants hardened-off by cold weather and/or drought stress may be more difficult to control. 
Thorough spray coverage of all garlic plants is essential. Typical symptoms of dying garlic plants may not be noticeable for 2
to 5 weeks.
Control will be improved by using ALLY EXTRA herbicide in combination with 2,4-D or MCPA (refer to Tank Mixtures 
section of this label for additional details).

Wild radish: For best results, use 0.4 oz/A applied in the fall to wild radish rosettes less than 6” in diameter and before 
plants harden-off. Alternatively, ALLY EXTRA herbicide can be applied in the spring for control of wild radish. Control will 
be improved by using ALLY EXTRA herbicide in combination with 2,4-D or MCPA (refer to Tank Mixtures section of this 
label for additional details) when wild radish rosettes are less than 6” in diameter. Applications made later than 30 days afte r 
weed emergence, either in the fall or spring, will result in partial control.
Kochia, Russian thistle, Prickly lettuce: Naturally occurring resistant biotypes of these weeds are known to occur. For best 
results, use ALLY EXTRA herbicide in a tank mix with fluoxypyr containing products, bromoxynil containing products 
(including Buctril® herbicide, Bronate® herbicide, or Bronate Advanced™ herbicide) or dicamba (including Banvel®
herbicide/ Clarity® herbicide) and/or 2,4-D (refer to Tank Mixtures section of this label for additional details). ALLY 
EXTRA herbicide should be applied in the spring when kochia, Russian thistle, and prickly lettuce are less than 2” tall or 2” 
across and are actively growing.
SPRAY ADJUVANTS
Include a spray adjuvant with applications of ALLY EXTRA herbicide in addition, an ammonium nitrogen fertilizer may be 
used.
Consult your Ag dealer or applicator, local FMC fact sheets, technical bulletins, and service policies prior to using an adjuvant 
system. If another herbicide is tank mixed with ALLY EXTRA herbicide, select adjuvants authorized for use with both 
products. Products must contain only EPA-exempt ingredients (40CFR 1001).
Nonionic Surfactant (NIS)
żApply 0.06 to 0.50% volume/volume (1/2 pt to 4 pt per 100 gal of spray solution).
żSurfactant products must contain at least 60% nonionic surfactant with a hydrophilic/lipophilic balance (HLB) greater than
12.– See the Tank Mixtures section of this label for additional information.
Petroleum Crop Oil Concentrate (COC) or Modified Seed Oil (MSO)
żApply at 1% volume/volume (1 gal per 100 gal spray solution) or 2% volume/volume under arid conditions.
żOil adjuvants must contain at least 80% high quality, petroleum (mineral) or modified vegetable seed oil with at least 15%
surfactant emulsifiers.
Special Adjuvant Types
żCombination adjuvant products may be used at doses that provide the required amount of NIS, COC, MSO and/or
ammonium nitrogen fertilizer. Consult product literature for use rates and restrictions.
żIn addition to the adjuvants specified above, other adjuvant types may be used if they provide the same functionality and
have been evaluated and approved by FMC product management. Consult separate FMC technical bulletins for detailed
information before using adjuvant types not specified on this label.
Ammonium Nitrogen Fertilizer
żUse 2 qt/acre of a high-quality urea ammonium nitrate (UAN), such as 28%N or 32%N, or 2 lb/acre of a spray-grade
ammonium sulfate (AMS). Use 4 qt/acre UAN or 4 lb/acre AMS under arid conditions.
GROUND APPLICATION
 For optimum spray distribution and thorough coverage, use flat-fan or low-volume flood nozzles.
For flat-fan nozzles, use a spray volume of at least 5 gal per acre (GPA).
For flood nozzles on 30” spacing, use flood nozzles no larger than TK10 (or the equivalent), a pressure of at least 30 psi and
a spray volume of at least 10 GPA only. For 40” nozzle spacing, use at least 13 GPA; for 60” spacing use at least 20 GPA. It 
is essential to overlap the nozzles 100% for all spacings.
“Raindrop RA” nozzles are not recommended for ALLY EXTRA herbicide applications, becaus e weed control performance 
may be reduced.
Use screens that are 50-mesh or larger.
AERIAL APPLICATION
• Use nozzle types and arrangements that provide optimum spray distribution and maximum coverage at 1 to 5 GPA.
• Use at least 3 GPA in Idaho, Oregon, Washington, or Utah.
• DO NOT apply ALLY EXTRA herbicide by air in the state of New York.
When applying ALLY EXTRA herbicide by air in areas near sens itive crops, use solid-stream nozzles oriented straight back. 
Adjust swath to avoid spray drift damage to downwind sensitive crops and/or ground equipment to treat border edge of field. 
See the Spray Drift Management section of this label.
For aerial application in Washington, follow the directions in the Spray Drift Management Section of this label and the 
following Washington state restrictions:
Applications of ALLY EXTRA herbicide must be made in equipment that meets the most restrictive Washington Agricultural 
Codes (WAC) for the prevention of herbicide drift for the respective county.
DO NOT apply in equipment that does not meet these WAC standards.


SEQUENTIAL APPLICATIONS
ALLY EXTRA herbicide can be applied either before or after applications of other products registered for use in wheat, 
barley, triticale or fallow. Read and follow all label instructions on timing, precautions, and warnings for these herbicides 
before using these in sequence with ALLY EXTRA herbicide. If those instructions conflict with this label, DO NOT use that 
product in sequence with ALLY EXTRA herbicide.
• DO NOT use any metsulfuron methyl-containing product as a sequential treatment with ALLY EXTRA herbicide.
• If using HARMONY® EXTRA XP herbicide as a sequential treatment with ALLY EXTRA herbicide, DO NOT exceed
0.7 oz/A of HARMONY® EXTRA XP herbicide per year.
• If using HARMONY® EXTRA SG herbicide (with TotalSol® soluble granules) as a sequential treatment with ALLY
EXTRA herbicide, DO NOT exceed 1.0 oz/A of HARMONY® EXTRA SG herbicide per year.
• If using EXPRESS® XP herbicide as a sequential treatment with ALLY EXTRA herbicide, DO NOT exceed 0.25 oz/A of
EXPRESS® XP herbicide per year.
• If using EXPRESS® herbicide (with TotalSol® soluble granules) as a sequential treatment with ALLY EXTRA herbicide,
DO NOT exceed 0.375 oz/A of EXPRESS® herbicide per year.
CROP ROTATION
Before using ALLY EXTRA herbicide carefully consider your crop rotation plans and options. For rotational flexibility, DO 
NOT treat all of your acres at the same time.
Minimum Rotational Intervals
Minimum rotation intervals* are determined by the rate of breakdown of ALLY EXTRA herbicide applied. ALLY EXTRA 
herbicide breakdown in the soil is affected by soil pH, presence of soil microorganisms, soil temperature, and soil moisture.
Low soil pH, high soil temperature, and high soil moisture increase ALLY EXTRA herbicide breakdown in soil, while high 
soil pH, low soil temperature, and low soil moisture slow ALLY EXTRA herbicide breakdown.
Of these 3 factors, only soil pH remains relatively constant. Soil temperature, and to a greater extent, soil moisture, can var y 
significantly from year to year and from area to area. For this reason, soil temperatures and soil moisture should be monitored 
regularly when considering crop rotations.
* The minimum rotation interval represents the period of time from the last application to the anticipated date of the next
planting. Minimum rotation intervals must be extended 1 crop season if drought conditions prevail after application
and before the rotational crop is planted.
Soil pH Limitations
ALLY EXTRA herbicide should not be used on soils having a pH above 7.9, because extended soil residual activity could 
extend crop rotation intervals beyond normal. Under certain conditions, ALLY EXTRA herbicide could remain in the soil for 
34 months or more, injuring wheat, barley or triticale. In addition, other crops planted in high-pH soils can be extremely 
sensitive to low concentrations of ALLY EXTRA herbicide.
Checking Soil pH
Before using ALLY EXTRA herbicide, determine the soil pH of the areas of intended use. To obtain a representative pH 
value for the test area, take several 0” to 4” samples from different areas of the field and analyze them separately. Consult 
local extension publications for additional information on recommended soil sampling procedures.


All Areas - Following Use of ALLY EXTRA herbicide at 0.21 to 0.4 Ounces Per Acre
Crop Soil pH
Minimum Cumulative 
Precipitation
(inches)
Minimum Rotation Interval 
(months)
Winter wheat, spring wheat 
and Triticale
7.9 or lower No restrictions 1
Durum wheat, barley, 
spring/winter oat
7.9 or lower No restrictions 10
Rotation Intervals For Crops in Non-Irrigated Land Following Use of ALLY EXTRA herbicide at 
0.21 to 0.4 Ounces Per Acre on Wheat, Barley, Triticale or Fallow
Location
Crop Soil pH
Minimum 
Cumulative 
Precipitation
(inches)
Minimum 
Rotation 
Interval
(months)
State County or Area
Colorado Statewide Grain sorghum 7.9 or lower No restrictions 4
Flax, Safflower 7.9 or lower No restrictions 22
Generally N of I-70 Field corn 7.9 or lower 15 12
Statewide STS Soybean 7.9 or lower No restrictions 4
IR Corn 7.9 or lower No restrictions 4
Proso millet 7.9 or lower No restrictions 4
Idaho Southern Idaho Flax, Safflower 7.9 or lower No restrictions 22
Statewide Peas, Lentils, 
Canola
6.8 or lower 18 10
Peas 6.9 to 7.9 18 15
Lentils 6.9 to 7.9 18 34
Canola 6.9 to 7.9 18 22
Condiment mustard 7.3 or lower 10 10
Chickpeas 
(Garbanzo beans)
7.3 or lower 10 10
Condiment mustard 7.4 or higher 28 34
Chickpeas 
(Garbanzo beans)
7.4 or higher 28 34
Kansas Statewide STS Soybean 7.9 or lower No restrictions 4
IR Corn 7.9 or lower No restrictions 4
Proso millet 7.9 or lower No restrictions 4
Grain sorghum 7.9 or lower No restrictions 4
Flax, Safflower 7.9 or lower No restrictions 22
Central and 
Western Kansas 
(West of
the Flint Hills)
Field corn 7.9 or lower 15 12
Western Kansas
W. of Hwy. 183
Soybeans 7.5 or lower
7.6–7.9
22
33
22
34
Central Kansas; 
generally E. of 
Hwy. 183 and W. 
of the Flinthills
Soybeans 7.9 or lower 15 12
Montana Statewide Grain sorghum,
Proso millet,
Field corn
7.9 or lower 22 22
Alfalfa (hay only) 7.6–7.9 No restrictions 34
7.5 or lower No restrictions 22
Flax, Safflower 7.9 or lower No restrictions 22
Continued on next page


Rotation Intervals For Crops in Non-Irrigated Land (continued)
Following Use of ALLY EXTRA herbicide at 0.21 to 0.4 Ounces Per Acre on Wheat, Barley, Triticale or 
Fallow
Location
Crop Soil pH
Minimum 
Cumulative 
Precipitation
(inches)
Minimum 
Rotation 
Interval
(months)
State County or Area
Nebraska Statewide STS Soybean 7.9 or lower No restrictions 4
IR Corn 7.9 or lower No restrictions 4
Proso millet 7.9 or lower No restrictions 4
Grain sorghum 7.9 or lower No restrictions 4
Flax, Safflower 7.9 or lower No restrictions 22
Generally W. of 
Hwy. 77 and E. of 
the Panhandle
Field corn 7.9 or lower 15 12
Soybeans 7.5 or lower 22 22
7.6-7.9 33 34
New Mexico Statewide Grain sorghum, 
Proso millet
7.9 or lower No restrictions 10
Flax, Safflower 7.9 or lower No restrictions 22
Eastern New Mexico Cotton (dryland only) 7.9 or lower 30 22
North Dakota W. of Hwy. 1 Grain sorghum, 
Proso millet, 
Field corn,
Dry beans, 
Flax, Safflower
7.9 or lower 22 22
E. of Hwy. 1 Grain sorghum, 
Proso millet, 
Field corn,
Dry beans, 
Flax, Safflower
7.9 or lower 34 34
Oklahoma Statewide STS So ybean 7.9 or lower No restrictions 4
IR Corn 7.9 or lower No restrictions 4
Proso millet 7.9 or lower No restrictions 4
Grain sorghum 7.9 or lower No restrictions 4
Flax, Safflower 7.9 or lower No restrictions 22
Field corn 7.9 or lower 15 12
Panhandle Cotton (dryland only) 7.9 or lower 30 22
E. of the Panhandle Cotton (dryland only) 7.9 or lower 25 14
Oregon Statewide Peas 
Lentils 
Canola
6.8 or lower 18 10
Peas 6.9 to 7.9 18 15
Lentils 6.9 to 7.9 18 34
Canola 6.9 to 7.9 18 22
Condiment mustard 7.3 or lower 10 10
Chickpeas 
(Garbanzo beans)
7.3 or lower 10 10
Condiment mustard 7.4 or higher 28 34
Chickpeas 
(Garbanzo beans)
7.4 or higher 28 34
South Dakota Statewide Flax, 
Safflower
7.9 or lower No restrictions 22
S. of Hwy. 212 &
E. of the Missouri
River, & S. of Hwy. 
34 & W. of
Missouri River
Grain sorghum, 
Proso millet
7.9 or lower 13 12
Generally E. of 
Missouri River & S. 
of Hwy. 14, & W. 
of MissouriRiver
Field corn 7.9 or lower 15 12
Continued on next page


Rotation Intervals For Crops in Non-Irrigated Land (continued)
Following Use of ALLY EXTRA herbicide at 0.21 to 0. 4 Ounces Per Acre on Wheat, Barley, Triticale or 
Fallow
Location
Crop Soil pH
Minimum 
Cumulative 
Precipitation 
(inches)
Minimum 
Rotation 
Interval 
(months)State County or Area
Texas Statewide STS Soybeans 7.9 or lower No restrictions 4
IR Corn 7.9 or lower No restrictions 4
Proso millet 7.9 or lower No restrictions 4
Grain sorghum 7.9 or lower No restrictions 4
Flax, Safflower 7.9 or lower No restrictions 22
Panhandle Field corn 7.9 or lower 15 12
Cotton (dryland only) 7.9 or lower 30 22
N. Central Texas* Field corn 7.9 or lower 15 12
Cotton (dryland only) 7.9 or lower 25 14
* The counties of N. Central Texas are: Archer, Baylor, Bell, Bosque, Bowie, Callahan, Camp, Cass,
Clay, Collin, Cooke, Coryell, Dallas, Delta, Denton , Eastland, Ellis, Falls, Fannin, Foard, Franklin,
Grayson, Hardeman, Haskell, Hill, Hood, Hopkins, Hunt, Jack, Johnson, Kaufman, Knox, Lamar,
Limestone, McLennan, Milam, Montague, Morris, Nafarro, Palo Pinto, Parker, Rains, Red River,
Robertson, Rockwall, Shackelford, Somervell, Stephens, Tarrent, Throckmorton, Titus, Upshur, Van 
Zandt, Wilbarger, Wichita, Williamson, Wise, Wood, Young.
Utah Statewide Flax, Safflower 7.9 or lower No restrictions 22
Washington Statewide Condiment mustard 7.3 or lower 10 10
Chickpeas
(Garbanzo beans)
7.3 or lower 10 10
Condiment mustard 7.4 or higher 28 34
Chickpeas 
(Garbanzo beans)
7.4 or higher 28 34
Peas 
Lentils
Canola
6.8 or lower 18 10
Peas 6.9 to 7.9 18 15
Lentils 6.9 to 7.9 18 34
Canola 6.9 to 7.9 18 22
Wyoming Statewide Flax, Safflower 7.9 or lower No restrictions 22
Southern Wyoming Grain sorghum, 
Proso millet
7.9 or lower No restrictions 10
Southern Wyoming 
(Goshen, Laramie, 
and Platte counties 
only)
Field corn 7.9 or lower 15 12
Northern Wyoming Grain sorghum, 
Proso millet, 
Field corn
7.9 or lower 22 22
Rotation Intervals for crops not covered above - The minimum rotation interval is 34 months with at least 28” of 
cumulative precipitation during the period:
• to any major field crop not listed (See the Rotation Intervals table)
• if the soil pH is not in the specified range
• if the use rate applied is not specified in the table
• or if the minimum cumulative precipitation has not occurred since application.
To rotate to a major field crop at an interval shorter than specified, a field bioassay must be successfully completed to that
crop. A field bioassay must be successfully completed before rotation to any minor crops (as determined by the USDA 
criteria). See section on Field Bioassay for further information.


Rotation Intervals For Crops in Non-Irrigated Land Following Use of ALLY EXTRA herbicide up
to 0.3 Ounces Per Acre on Wheat, Barley, Triticale or Fallow in the states of Colorado, Kansas,
Nebraska, New Mexico, Oklahoma, South Dakota, Texas and Wyoming
Crop Soil pH Minimum Cumulative 
Precipitation (inches)
Minimum Rotation 
Interval (months)
Sunflower 7.9 or lower No restrictions 10
Rotation Intervals for crops not covered above (up to 0.3 ounces per acre) - The minimum rotation interval is 34 months 
with at least 28” of cumulative precipitation during the period:
• to any major field crop not listed (See the Rotation Intervals table)
• if the soil pH is not in the specified range
• if the use rate applied is not specified in the table
• or if the minimum cumulative precipitation has not occurred since application.
To rotate to a major field crop at an interval shorter than specified, a field bioassay must be successfully completed to that 
crop. A field bioassay must be successfully completed before rotation to any minor crops (as determined by the USDA 
criteria). See section on Field Bioassay for further information.
Rotation Intervals For Crops in Non-Irrigated Land
Following Use of ALLY EXTRA herbicide at 0.31 to 0.4 Ounces Per Acre on Wheat, Barley, 
Triticale or Fallow
Location
Crop Soil pH
Minimum 
Cumulative 
Precipitation 
(inches)
Minimum
Rotation 
Interval 
(months)State County or Area
Colorado 
Idaho 
Kansas 
Montana 
Nebraska 
New Mexico 
Oklahoma
South Dakota 
Texas
Utah 
Wyoming
Statewide Sunflower 7.9 or lower No restrictions 22
North Dakota W. of Hwy. 1 Sunflower 7.9 or lower 22 22
E. of Hwy. 1 Sunflower 7.9 or lower 34 34
Rotation Intervals for crops not covered above (0.31 to 0.4 ounces per acre) - The minimum rotation interval is 34 
months with at least 28” of cumulative precipitation during the period:
• to any major field crop not listed (See the Rotation Intervals table)
• if the soil pH is not in the specified range
• if the use rate applied is not specified in the table
• or if the minimum cumulative precipitation has not occurred since application.
To rotate to a major field crop at an interval shorter than specified, a field bioassay must be successfully completed to that 
crop. A field bioassay must be successfully completed before rotation to any minor crops (as determined by the USDA 
criteria). See section on Field Bioassay for further information.


Rotation Intervals For Crops in Non-Irrigated Land
Following Use of ALLY EXTRA herbicide at 0.2 Ounces Per Acre on Wheat, Barley Triticale or 
Fallow
Crop Soil pH Minimum Cumulative 
Precipitation (inches)
Minimum Rotation 
Interval (months)
Sorghum, Grain 7.9 or lower No restrictions 4
Cotton 7.9 or lower No restrictions 10
Safflower 7.9 or lower No restrictions 10
Peas, Dry /Green 6.8 or lower No restrictions 10
6.9 to 7.9 No restrictions 22
Lentils 6.8 or lower No restrictions 10
6.9 to 7.9 No restrictions 22
Alfalfa 6.8 or lower No restrictions 10
6.9 to 7.9 No restrictions 22
Beans, Dry 6.8 or lower No restrictions 10
6.9 to 7.9 No restrictions 22
Sunflower 7.9 or lower No restrictions 10
Rotation Intervals for crops not covered above (0.2 ounces per acre) - The minimum rotation interval is 22 months with 
at least 18” of cumulative precipitation during the period:
• to any major field crop not listed (See the Rotation Intervals table)
• if the soil pH is not in the specified range
• if the use rate applied is not specified in the table
• or if the minimum cumulative precipitation has not occurred since application.
To rotate to a major field crop at an interval shorter than specified, a field bioassay must be successfully completed to that 
crop. A field bioassay must be successfully completed before rotation to any minor crops (as determined by the USDA 
criteria). See section on Field Bioassay for further information.
FIELD BIOASSAY
A field bioassay is necessary if crops other than wheat, barley or those listed on this label are to be planted on land previously 
treated with ALLY EXTRA herbicide. To conduct a field bioassay, grow test strips of the crop or crops you plan to grow the 
following year in fields previously treated with ALLY EXTRA herbicide. Crop response to the bioassay will indicate whether 
or not to rotate to the crop(s) grown in the test strips.
If a field bioassay is planned, check with your local FMC representative for information detailing field bioassay procedure.
GRAZING
Allow at least 7 days between application and grazing of treated forage. In addition, allow at least 7 days between application
and feeding of forage from treated areas to livestock. Allow at least 30 days between application and feeding of hay from 
treated areas to livestock. Harvested straw may be used for bedding and/or feed. Allow at least 45 days between application 
and harvesting of grain.
MIXING INSTRUCTIONS
1. Fill the tank 1/4 to 1/3 full of water.
2. While agitating, add the required amount of ALLY EXTRA herbicide.
3. Continue agitation until the ALLY EXTRA herbicide is fully dispersed, at least 5 minutes.
4. Once the ALLY EXTRA herbicide is fully dispersed, maintain agitation and continue filling tank with water. ALLY
EXTRA herbicide should be thoroughly mixed with water before adding any other material.
5. As the tank is filling, add tank mix partners (if desired) then add the required volume of surfactant. Always add surfactant
last. Antifoaming agents may be used. DO NOT use with spray additives that alter the pH of the spray solution below pH
5.0 or above pH 9.0 as rapid product degradation can occur. Spray solutions of pH 6.0 - 8.0 allow for optimum stability of
ALLY EXTRA herbicide.
6. If the mixture is not continuously agitated, settling will occur. If settling occurs, thoroughly reagitate beforeusing.
7. Apply ALLY EXTRA herbicide spray mixture within 24 hours of mixing to avoid product degradation.
8. If ALLY EXTRA herbicide and a tank mix partner are to be applied in multiple loads, pre-slurry the ALLY EXTRA
herbicide in clean water prior to adding to the tank. This will prevent the tank mix partner from interfering with the
dispersion of ALLY EXTRA herbicide.


SPRAY EQUIPMENT
For specific application equipment, refer to the manufacturer’s instructions for additional information on GPA, pressure, 
speed, nozzle types and arrangements, nozzle heights above the target canopy, etc.
Be sure to calibrate air or ground equipment properly before application. Select a spray volume and delivery system that will
ensure thorough coverage and a uniform spray pattern with minimum drift. Use higher spray volumes to obtain better 
coverage when crop canopy is dense. Avoid swath overlapping, and shut off spray booms while starting, turning, slowing, or 
stopping, to avoid injury to the crop.
DO NOT make applications using equipment and/or spray volumes or during weather conditions that might cause spray to 
drift onto nontarget sites. For additional information on spray drift refer to Spray Drift Management section of label.
Continuous agitation is required to keep ALLY EXTRA herbicide in suspension.
SPRAYER CLEANUP
The spray equipment must be cleaned before ALLY EXTRA herb icide is sprayed. Follow the cleanup procedures specified 
on the labels of the previously applied products. If no directions are provided, follow the six steps outlined in the After 
Spraying ALLY EXTRA herbicide section of this label.
AT THE END OF THE DAY
It is recommended that during periods when multiple loads of ALLY EXTRA herbicide are applied, at the end of each day of 
spraying the interior of the tank be rinsed with fresh water and then partially filled, and the boom and hoses flushed. This wi ll 
prevent the buildup of dried pesticide deposits which can accumulate in the application equipment.
AFTER SPRAYING ALLY EXTRA HERBICIDE AND BEFORE SPRAYING CROPS OTHER THAN 
WHEAT, BARLEY OR TRITICALE
To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment immediately following 
applications of ALLY EXTRA herbicide as follows:
1. Drain tank; thoroughly rinse spray tanks, boom, and hoses with clean water. Loosen and physically remove any visible
deposits.
2. Fill the tank with clean water and 1 gal of household ammonia* (contains 3% active ingredient) for every 100 gal of water.
Flush the hoses, boom, and nozzles with the cleaning solution. Then add more water to completely fill the tank. Circulate
the cleaning solution through the tank and hoses for at least 15 min. Flush the hoses, boom, and nozzles again with the
cleaning solution, and then drain the tank.
3. Remove the nozzles and screens and clean separately in a bucket containing cleaning agent and water.
4. Repeat step 2.
5. Rinse the tank, boom, and hoses with clean water.
6. If only ammonia is used as a cleaner, the rinsate solution may be applied back to the crop(s) specified on this label. DO
NOT exceed the maximum labeled use rate. If other cleaners are used, consult the cleaner label for rinsate disposal
instructions. If no instructions are given, dispose of the rinsate on site or at an approved waste disposal facility.
* Equivalent amounts of an alternate-strength ammonia solution or an FMC-approved cleaner can be used in the cleanout procedure. Carefully read
and follow the individual cleaner instructions. Consult your Ag dealer, applicator, or FMC representative for a listing of approved cleaners.
Notes:
1. CAUTION: DO NOT use chlorine bleach with ammonia because dangerous gases will form. DO NOT clean equipment in
an enclosed area.
2. Steam-cleaning aerial spray tanks is recommended prior to performing the above cleanout procedure to facilitate th e
removal of any caked deposits.
3. When ALLY EXTRA herbicide is tank mixed with other pesticides, cleanout procedures for each product should be
examined and the most rigorous procedure should be followed.
4. In addition to this cleanout procedure, all pre-cleanout guidelines on subsequently applied products should be followed as
per the individual product labels.
5. Where routine spraying practices include shared equipment frequently being switched between applications of ALLY
EXTRA herbicide and applications of other pesticides to ALLY EXTRA herbicide-sensitive crops during the same spray
season, it is recommended that a sprayer be dedicated to ALLY EXTRA herbicide to further reduce the chance of crop
injury.


SPRAY DRIFT MANAGEMENT ADVISORIES
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
IMPORTANCE OF DROPLET SIZE
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. 
While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made 
improperly or under unfavorable environmental conditions.
Controlling Droplet Size – Ground Boom
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical
spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate.
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size.
• Spray Nozzle - Use a spray nozzle that is designed for the in tended application. Consider using nozzles designed to reduce
drift.
Controlling Droplet Size – Aircraft
• Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to reduce fine droplets,
nozzles should be oriented parallel with the airflow in flight.
BOOM HEIGHT – Ground Boom
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage. For ground 
equipment, the boom should remain level with the crop and have minimal bounce.
RELEASE HEIGHT - Aircraft
Higher release heights increase the potential for spray drift. When applying aerially to crops, DO NOT release spray at a heigh t 
greater than 10 ft above the crop canopy, unless a greater application height is necessary for pilot safety.
SHIELDED SPRAYERS
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are
not interfering with the uniform deposition of the spray on the target area.
MANDATORY SPRAY DRIFT MANAGEMENT
Ground Boom Applications:
• Apply with the nozzle height recommended by the manufacturer, but no more than 3 feet above the ground or crop
canopy.
• For applications prior to the emergence of crops and target weeds, applicators are required to use a Coarse or coarser
droplet size (ASABE S572.1).
• For all other applications, applicators are required to use a Medium or coarser droplet size (ASABES572.1).
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.
Boom-less Ground Applications: 
• Applicators are required to use a Medium or coarser droplet size (ASABE S572.1) for all applications.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.
Aerial Applications:
• DO NOT release spray at a height greater than 10 feet above the vegetative canopy, unless a greater application height is
necessary for pilot safety.
• For applications prior to the emergence of crops and target weeds, applicators are required to use a Coarse or coarser
droplet size (ASABE S572.1).
• For all other applications, applicators are required to use a Medium or coarser droplet size (ASABES572.1).
• The boom length must not exceed 65% of the wingspan for airplanes or 75% of the rotor blade diameter for helicopters.
• Applicators must use one-half swath displacement upwind at the downwind edge of the field.
• Nozzles must be oriented so the spray is directed toward the back of the aircraft.
• DO NOT apply when wind speeds exceed 10 miles per hour at the application site.
• DO NOT apply during temperature inversions.


TEMPERATURE AND HUMIDITY
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
TEMPERATURE INVERSIONS
Drift potential is high during a temperature inversion. Temper ature inversions are characterized by increasing temperature 
with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be 
indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that 
layers and moves laterally in a concentrated cloud (under lo w wind conditions) indicates an inversion, while smoke that 
moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.
WIND
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.
Handheld Technology Applications:
• Take precautions to minimize spray drift.
Boom-less Ground Applications
• Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.
SENSITIVE AREAS
The pesticide may only be applied when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies of 
water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g. when wind is blowing away 
from the sensitive areas).
DRIFT CONTROL ADDITIVES
Using product compatible drift control additives can reduce drift potential. When a drift control additive is used, read and 
carefully observe cautionary statements and all other information on the additive’s label. If using an additive that increases
viscosity, ensure that the nozzles and other application equipment will function properly with a viscous spray solution. 
Preferred drift control additives have been certified by the Chemical Producers and Distributors Association (CPDA).
WEED RESISTANCE MANAGEMENT
ALLY EXTRA herbicide, which contains the active ingredients Metsulfuron methyl, Thifensulfuron methyl and Tribenuron 
methyl, is a group 2 herbicide based on the mode of action classification system of the Weed Science Society ofAmerica.
Proactively implementing diversified weed control strategies to minimize selection for weed populations resistant to one or 
more herbicides is a best practice. A diversified weed management program may include the use of multiple herbicides with 
different sites of action and overlapping weed spectrum with or without tillage operations and/or other cultural practices. 
Research has demonstrated that using the labeled rate and directions for use is important to delay the selection for resistance.
The continued effectiveness of this product depends on the successful implementation of a weed resistance management 
program.
To aid in the prevention of developing weeds resistant to this product, users should:
• Scout fields before application to ensure herbicides and rates will be appropriate for the weed species and weed sizes
present.
• Start with a clean field, using either a burndown herbicide application or tillage.
• Control weeds early when they are relatively small (less than 4 inches).
• Apply full rates of ALLY EXTRA herbicide for the most difficult to control weed in the field at the specified time (correct
weed size) to minimize weed escapes.
• Scout fields after application to detect weed escapes or shifts in control of weedspecies.
• Control weed escapes before they reproduce by seed or proliferate vegetatively.
• Report any incidence of non-performance of this product ag ainst a particular weed to your FMC representative, local
retailer, or county extension agent.
• Contact your FMC representative, crop advisor, or extension agent to find out if suspected resistant weeds to these MOAs
have been found in your region. DO NOT assume that each listed weed is being controlled by multiple sites of action.
Products with multiple active ingredients are intended to broaden the spectrum of weeds that are controlled. Some weeds
may be controlled by only one of the active ingredient in this product.
• If resistance is suspected, treat weed escapes with an herb icide having a site of action other than Group 2 and/or use
nonchemical methods to remove escapes, as practical, with the goal of preventing further seed production.
• Suspected herbicide-resistant weeds may be identified by these indicators:
- Failure to control a weed species normal ly controlled by the herbicide at the dose applied, especially if control is
achieved on adjacent weeds;
- A spreading patch of non-controlled plants of a particular weed species; and
- Surviving plants mixed with controlled individuals of the same species.


Additionally, users should follow as many of the following herbicide resistance management practices as is practical:
• Use a broad spectrum soil-applied herbicide with other sites of action as a foundation in a weed control program.
• Utilize sequential applications of herbicides with alternative sites ofaction.
• Rotate the use of this product with non-Group 2 herbicides.
• Avoid making more than two applications of ALLY EXTRA herbicide and any other Group 2 herbicides within a single
growing season unless mixed with an herbicide with a different site of action with an overlapping spectrum for the
difficult-to- control weeds.
• Incorporate non-chemical weed control practices, such as mech anical cultivation, crop rotation, cover crops and weed-free
crop seeds, as part of an integrated weed control program.
• Use good agronomic principles that enhance crop development and crop competitiveness.
• Thoroughly clean plant residues from equipment before leaving fields suspected to contain resistant weeds.
• Manage weeds in and around fields, during and after harvest to reduce weed seedproduction.
INTEGRATED PEST MANAGEMENT
FMC recommends the use of Integrated Pest Management (IPM) programs to control pests. This product may be used as part 
of an Integrated Pest Management (IPM) program which can include biological, cultural, and genetic practices aimed at 
preventing economic pest damage. Application of this product should be based on IPM principles and practices including 
field scouting or other detection methods, correct target pest identification, population monitoring, and treating when target
pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional 
consultants or other qualified authorities to determine appropriate action treatment threshold levels for treating specific 
pest/crop systems in your area.
RESTRICTIONS AND PRECAUTIONS
• ALLY EXTRA herbicide is only registered on wheat, barley, triticale and fallow. DO NOT use on any othercrop.
• DO NOT apply this product through any type of irrigation equipment or to irrigated land where tailwater will be used
to irrigate crops other than wheat, barley or triticale.
• Varieties of wheat (including durum), barley and triticale may differ in their response to various herbicides. FMC
recommends that you first consult your state experiment station, university, or extension agent as to sensitivity to any
herbicide. If no information is available, limit the initial use of ALLY EXTRA herbicide to a small area.
• Under certain conditions such as heavy rainfall, prolonged cold weather, or wide fluctuations in day/night temperatures
prior to or soon after ALLY EXTRA herbicide application, temporary discoloration and/or crop injury may occur. To
reduce the potential of crop injury, tank mix ALLY EXTRA herbicide with 2,4-D (ester formulations perform best–see the
Tank Mixtures section of this label) and apply after the crop is in the tillering stage of growth.
• ALLY EXTRA herbicide should not be applied to wheat, barley or triticale that is stressed by severe weather conditions,
drought, low fertility, water-saturated soil, disease, or insect damage, as crop injury may result. Risk of injury is greatest
when crop is in the 2 to 5- leaf stage. Severe winter stress, drought, disease, or insect damage following application also
may result in crop injury.
• DO NOT apply to wheat, barley or triticale undersown with legu mes and grasses, because injury to the forages will result.
• For ground applications applied when dry, dusty field conditions exist, control of weeds in wheel track areas may be
reduced. The addition of 2,4-D or MCPA may improve weed control under these conditions.
• Injury to or loss of desirable trees or vegetation may result from failure to observe the following:
- DO NOT apply, drain or flush equipment on or near desirable trees or other plants or on areas where their roots may
extend, or in locations where the chemical may be washed or moved into contact with their roots.
- DO NOT use on lawns, walks, driveways, tennis courts, or similar areas. Prevent drift of spray to desirable plants.
• Injury to or loss of adjacent sensitive crops and vegeta tion may result from failure to observe the following:
- Take all necessary precautions to avoid all direct or indirect contact (such as spray drift) with non-target plants or
areas.
- Carefully observe all sprayer cleanup instructions both prior to and after using this product, as spray tank residue
may damage crops other than wheat, barley or triticale.


When using ALLY EXTRA herbicide in tank mixes or sequential applications with other products containing metsulfuron 
methyl, thifensulfuron methyl, and/or tribenuron methyl, DO NOT exceed the following limits:
Use Area Application 
Timing
Maximum 
Product 
oz/A per 
Single 
Application
Active 
Ingredient
Maximum 
AI oz/A per 
Single 
Application
Maximum AI 
oz/A per 
Cropping 
Cycle & per 
Year
For All 
Applications 
Maximum AI 
oz/A per 
Year
Max # of 
Cropping 
Cycles
Maximum Number 
of Applications per 
Cropping Cycle & 
Year
Pre-Harvest 
Interval, Days
Fallow
Spring or fall 
when the 
majority of 
weeds have 
emerged and 
are actively 
growing.
Post harvest, 
fallow, spring 
or fall.
0.40
Metsulfuron 
Methyl 0.06 0.06 0.06
12 N A
Thifensulfuron 
Methyl 0.15 0.15 0.75
Tribenuron 
Methyl 0.075 0.075 0.50
Wheat, 
barley, 
triticale
After 2-leaf 
stage but 
before flag 
leaf is visible
0.40
Metsulfuron 
Methyl 0.06 0.06 0.06
12
Allow at least 7 days 
between application 
and grazing of treated 
forage. In addition, 
allow at least 7 days 
between application 
and feeding of forage 
from treated areas to 
livestock. Allow at 
least 30 days between 
application and 
feeding of hay from 
treated areas to 
livestock. Harvested 
straw may be used for 
bedding and/or feed. 
Allow at least 45 days 
between application 
and harvesting of 
grain.
Thifensulfuron 
Methyl 0.15 0.15 0.75
Tribenuron
Methyl 0.075 0.075 0.50
Durum and 
Wampum
Variety 
Spring 
Wheat
After tillering
but before
boot.
0.40
Metsulfuron 
Methyl 0.06 0.06 0.06
12
Allow at least 7 days 
between application 
and grazing of treated 
forage. In addition, 
allow at least 7 days 
between application 
and feeding of forage 
from treated areas to 
livestock. Allow at 
least 30 days between 
application and 
feeding of hay from 
treated areas to 
livestock. Harvested 
straw may be used for 
bedding and/or feed. 
Allow at least 45 days 
between application 
and harvesting of 
grain.
Thifensulfuron 
Methyl 0.15 0.15 0.75
Tribenuron 
Methyl
0.075 0.075 0.50


IDENTIFICATION INFORMATION FOR PRODUCTS REFERENCED IN THIS LABEL
IDENTIFICATION FOR PRODUCTS REFERENCED IN THIS LABEL 
REGISTERED PRODUCTS REFERENCED IN THIS LABEL FOR TANK MIXTURES 
OR MENTIONED FOR OTHER REASONS 
Product Name Active Ingredient(s) EPA Registration Number
Discover® NG Herbicide Clodinafop-propargyl 100-1173
Buctril® Herbicide Bromoxynil 264-437
Bronate® Herbicide Bromoxynil + MCPA 264-438
Hoelon® 3EC Herbicide Diclofop-methyl 264-641
Puma® 1EC Herbicide Fenoxaprop-p-ethyl 264-666
Bronate Advanced™ Herbicide Bromoxynil + MCPA 264-690
Clarity® Herbicide Dicamba 7969-137
Colt® + Sword® Herbicide 
(Starane® + Sword Herbicide, 
Starane® + MCPA Herbicide) 
Fluroxypyr + MCPA 34704-1011
Maverick® Herbicide Sulfosulfuron 59639-223
Curtail® Herbicide 2,4-D + Clopyralid 62719-48
Stinger® Herbicide Clopyralid 62719-73
Curtail® M Herbicide Clopyralid + MCPA 62719-86
WideMatch® Herbicide Clopyralid + Fluroxypyr 62719-512
Starane® NXT Herbicide Bromoxynil + Fluroxypyr 62719-557
Starane® Ultra Herbicide Fluroxypyr 62719-577
Starane® Flex Herbicide Florasulam + Fluroxypyr 62719-604
Banvel® Herbicide Dicamba 66330-276
Everest® 2.0 Herbicide Flucarbazone-sodium 66330-391
Banvel® 480 Herbicide Dicamba 66330-421
Everest® 3.0 Herbicide Flucarbazone-sodium 66330-429
Everest® 3.0 AG Flucarbazone-sodium 66330-433


STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal.
Pesticide Storage: Store product in original container only.
Pesticide Disposal: Do not contaminate water, food, or feed by disposal. Wastes resulting from the use of this product 
must be disposed of on site or at an approved waste disposal facility.
Container Handling: Refer to the Net Co ntents section of this product’s labe ling for the applicable “Nonrefillable 
Container” or “Refillable Container” designation.
Nonrefillable Plastic and Metal Containers (Capacity Equal to or Less Than 50 Pounds): Nonrefillable container. Do 
not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: 
Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water and recap. 
Shake for 10 seconds. Pour rinsate into ap plication equipment or a mix tank or stor e rinsate for later use or disposal. Drain
for 10 seconds after the flow begins to drip. Repeat this pro cedure two more times. Then, for Plastic Containers, offer for 
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by 
state and local ordinances. For Metal Containers, offer for r ecycling if available or reconditioning if appropriate, or 
puncture and dispose of in a sanitary landfill, or by other procedures approved by state and local authorities.
Nonrefillable Plastic and Metal Containers (Capacity Greater Than 50 Pounds): Nonrefillable container. Do not reuse 
or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten 
closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. 
Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it 
back and forth several times. Empty the rinsate into applicatio n equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times. Then, for Plas tic Containers, offer for recycling if available or puncture 
and dispose of in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local ordinances. For 
Metal Containers, offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary 
landfill, or by other procedures approved by state and local authorities.
Nonrefillable Plastic and Metal Containers, e.g., Intermedia te Bulk Containers [IBC] (Size or Shape Too Large to 
be Tipped, Rolled or Turned Upside Down): Nonrefillable container. Do not reuse or refill this container. Clean 
container promptly after emptying the contents from this cont ainer into application equipment or mix tank and before final 
disposal using the following pressure rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the 
container and ensure that the water spray thoroughly covers the top, bottom and all sides inside the container. The nozzle 
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or spray volume. If the 
manufacturer’s instructions are not available, pressure rinse the container for at least 60 seconds using a minimum pressure 
of 30 PSI with a minimum rinse volume of 10% of the container volume. Drain, pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for Plastic 
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal 
Containers, offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfil l, 
or by other procedures approved by state and local authorities.
Nonrefillable Paper or Plastic Bags, Fiber Sacks including Fl exible Intermediate Bulk Containers (FIBC) or Fiber 
Drums With Liners: Nonrefillable container. Do not reuse or refill this container. Completely empty paper or plastic bag, 
fiber sack or drum liner by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into 
application or manufacturing equipment. Then offer for recycling if available or dispose of empty paper or plastic bag, 
fiber sack or fiber drum and liner in a sanitary landfill, or by incineration. Do not burn, unless allowed by state and local 
ordinances.
Refillable Fiber Drums With Liners: Refillable container (fiber drum only). Refilling Fiber Drum: Refill this fiber drum 
with ALLY EXTRA herbicide containing thifensulfuron methyl, tribenuron methyl and metsulfuron methyl only. Do not 
reuse this fiber drum for any other purpose. Cleaning before refilling is the responsibility of the refiller. Completely empty
liner by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into application or manufacturing 
equipment. Disposing of Fiber Drum and/or Liner: Do not reuse this fiber drum for any other purpose other than refilling 
(see preceding). Cleaning the container (liner and/or fiber drum) before final disposal is the responsibility of the person 
disposing of the container. Offer the liner for recycling if available or dispose of liner in a sanitary landfill, or by 
incineration. Do not burn, unless allowed by state and local ordinances. If drum is contaminated and cannot be reused, 
dispose of it in the manner required for its liner. To clean the fiber drum before final disposal, completely empty the fiber
drum by shaking and tapping sides and bottom to loosen clinging particles. Empty residue into application or 
manufacturing equipment. Then offer the fiber drum for recycling if available or dispose of in a sanitary landfill, or by 
incineration. Do not burn, unless allowed by state and local ordinances.
All Other Refillable Containers: Refillable container. Refilling Container: Refill this container with ALLY EXTRA 
herbicide containing thifensulfuron methyl, tribenuron methyl and metsulfuron methyl only. Do not reuse this container for 
any other purpose. Cleaning before refilling is the responsibility of the refiller. Prior to refilling, inspect carefully for 
damage such as cracks, punctures, abrasions, worn out threads and closure devices. If damage is found, do not use the 
container, contact FMC at the number below for instructions. Check for leaks after refilling and before transporting. If leaks 
are found, do not reuse or transport container, contact FMC at the number below for instructions.
Disposing of Container: Do not reuse this container for any other purpose other than refilling (see preceding). Cleaning the 
container before final disposal is the responsibility of the pers on disposing of the container. To clean the container before 
final disposal, use the following pressure rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into
the container and ensure that the water spray thoroughly covers the top, bottom and all sides inside the container. The 
nozzle manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or spray


NOTICE TO BUYER: Purchase of this material does not confer any rights under patents of countries outside of the United 
States.
FMC, Ally®, Aim®, Express®, Harmony®, and TotalSol® are trademarks of FMC Corporation or an affiliate. 
“Maverick” is a registered trademark of Valent U.S.A. LLC 
“Clarity” is a registered trademark of BASF Corporation 
“Buctril”, “Bronate”, “Bronate Advanced”, “Hoelon”, and “Puma” are registered trademarks of Bayer Crop Science 
“Starane”, “Stinger”, “Curtail”, “Curtail M”, and “Widematch” are registered trademarks of Corteva Agriscience United States 
“Colt + Sword” is a registered trademark of UAP Loveland Products Inc. 
“Discover” is a registered trademark of Syngenta Crop Protection LLC 
“Banvel” and “Everest” are registered trademarks of Arysta LifeScience North America LLC 
“Raindrop RA” is a registered trademark of Delavan 
D - 4021 120319
volume. If the manufacturer’s instructions are not available, pressure rinse the container for at least 60 seconds using a 
minimum pressure of 30 PSI with a minimum rinse volume of 10% of the container volume. Drain, pour or pump rinsate 
into application equipment or rinsate collection system. Repeat this pressure rinsing procedure two more times. Then, for 
Plastic Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. Do 
not burn, unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or 
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures approved by state and 
local authorities.
Outer Foil Pouches of Wat er Soluble Packets (WSP): Nonrefillable container. Do not reuse or refill this container. 
Offer for recycling if available or, dispose of the empty outer foil pouch in the trash as long as WSP is unbroken. If the 
outer pouch contacts the formulated product in any way, the pouch must be triple rinsed with clean water. Add the rinsate 
to the spray tank and dispose of the outer pouch as described previously.
Do not transport if this container is damaged or leaking. If th e container is damaged, leaking or obsolete, or in the event of
a major spill, fire or other emergency, contact CHEMTREC (Transportation and Spills) at 1-800-424-9300, day ornight.


CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY
Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or 
using this product. If the terms are not acceptable, return the product at once, unopened, and the purchase price will be refunded.
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all risks inherently associated with 
the use of this product. Crop injury, ineffectiveness, or other unintended consequences may result because of such factors as
manner of use or application, weather or crop conditions beyond the control of FMC or Seller. To the extent consistent with 
applicable law, all such risks shall be assumed by Buyer and User, and, to the extent consistent with applicable law, Buyer and
User agree to hold FMC and Seller harmless for any claims relating to such factors.
Seller warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes 
stated on the Directions for Use when used in accordance with the directions under normal conditions of use. TO THE 
EXTENT CONSISTENT WITH APPLICABLE LAW, FMC MAKES NO WARRANTIES OF MERCHANTABILITY 
OR OF FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRESS OR IMPLIED WARRANTIES 
WITH RESPECT TO THE SELECTION, PURCHASE, OR USE OF THIS PRODUCT. Any warranties, express or
implied, having been made are inapplicable if this product has been used contrary to label instructions, or under 
abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the control of) Seller or FMC, and, to 
the extent permitted by applicable law, Buyer assumes the risk of any such use.
To the extent consistent with applicable law, FMC or Seller shall not be liable for any incidental, consequential or special 
damages resulting from the use or handling of this product. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, 
THE EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND SELLER 
FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF 
WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE 
OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT 
THE ELECTION OF FMC OR SELLER, THE REPLACEMENT OF THE PRODUCT.
This Condition of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.
FMC Corporation, 2929 Walnut Street, Philadelphia, PA 19104
© 2001-2019 FMC Corporation. All rights reserved.