crop-chem-docs/corpus/epa_ppls/2935-553.md

# BASE CAMP LV 6

- EPA Reg No: **2935-553**
- Registrant: WILBUR-ELLIS COMPANY LLC
- Signal word: Caution
- Active ingredients: 2,4-D, 2-ethylhexyl ester (86.5%)
- Label accepted: 2016-08-31
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/002935-00553-20160831.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
 
 
 
Notification Label Revisions Requested v.20150904 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 August 31, 2016 
 
Mr. James Yowell 
Wilber-Ellis, c/o Spring Trading Company 
203 Dogwood Trail 
Magnolia, TX 77354-5201 
 
Subject: Notification per PRN 98-10 – To remove adjuvant language 
 Product Name: BaseCamp LV6 
 EPA Registration Number: 2935-553 
 Application Date: 04/03/15 
 Decision Number: 508411 
 
Dear Mr. Yowell: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. The label submitted with the 
application has been stamped “Notification” and will be placed in our records. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide 
Act and is subject to review by the Agency. If the website is false or misleading, the product 
would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 
CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, 
regardless of whether a website is referenced on your product’s label, claims made on the 
website may not substantially differ from those claims approved through the registration process. 
Therefore, should the Agency find or if it is brought to our attention that a website contains false 
or misleading statements or claims substantially differing from the EPA approved registration, 
the website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
If you have any questions, you may contact Karen Samek at (703) 347-8825 or via email at 
samek.karen@epa.gov. 
 
 Sincerely, 
 
 Kathryn Montague, Product Manager 23 
 Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Programs

ACTIVES
Herbicide
WILBUR-ELLIS
BASE CAMP 0
LV 6
LOW VOLATILE HERBICIDE
ACTIVE INGREDIENT:
2-ethylhexyl ester of 2,4-dichlorophenoxyacetic acid* .....................86.5%
OTHER INGREDIENTSf .....................................................................13.5%
TOTAL...................................100.0%
'Equivalent to 57.4% of 2,4-dichlorophenoxyacetic acid or 5.5 Ib./gal. Isomer 
specific by AOAC Method.
■[Contains petroleum distillates.
EPA REG. NO. 2935-553 EPA EST. NO. 228-IL-001
KEEP OUT OF REACH OF CHILDREN 
CAUTION
Si usted no entiende la etiqueta, busque a alguien para que se la explique 
a usted en detalle. (If you do not understand the label, find someone to 
explain it to you in detail.)
FIRST AID
If swallowed: • Immediately call a poison control center or doctor.
• Do not induce vomiting unless told to do so by a 
poison control center or doctor.
• Do not give any liquid to the person.
• Do not give anything by mouth to an unconscious
person.
If on skin or 
clothing:
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15-
20 minutes.
• Call a poison control center or doctor for treatment
advice.
If in eyes: • Hold eye open and rinse slowly and gently with 
water for 15-20 minutes.
• Remove contact lenses, if present, after the first 5 
minutes, then continue rinsing eye.
• Call a poison control center or doctor for treatment
advice.
If inhaled: • Move person to fresh air.
• If person is not breathing, call 911 or an ambulance,
then give artificial respiration, preferably by mouth- 
to-mouth, if possible.
• Call a poison control center or doctor for further
treatment advice.
HOT LINE NUMBER: Have the product container or label with you 
when calling a poison control center or doctor, or going for treatment. 
You may also contact 1 -800-424-9300 for emergency medical treatment 
information.
NOTE TO PHYSICIAN: Contains petroleum distillate. Vomiting 
may cause aspiration pneumonia. If lavage is performed, suggest 
endotracheal and/or esophagoscopic control.
PRECAUTIONARY STATEMENTS 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
CAUTION
Harmful if swallowed, absorbed through skin or inhaled. Causes moderate 
eye irritation. Avoid contact with skin, eyes, or clothing. Prolonged or 
frequently repeated skin contact may cause allergic skin reactions in some 
individuals.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemical-resistant to this product are neoprene or 
nitrile rubber. If you want more options, follow the instructions for Category 
E on an EPA chemical-resistance category selection chart.
All mixers, loaders, applicators, flaggers and other handlers must wear:
• Long-sleeved shirt and long pants
• Shoes plus socks
• Chemical-resistant gloves
• Chemical-resistant apron when applying with any hand-held nozzle or
equipment, mixing or loading, cleaning up spills or equipment, or
otherwise exposed to the concentrate.
See engineering controls for additional requirements.
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such 
instructions for washables exist, use detergent and hot water. Keep and 
wash PPE separately from other laundry. After each day of use, clothing or 
PPE must not be reused until it has been cleaned.
ENGINEERING CONTROLS
Pilots must use an enclosed cockpit that meets the requirements listed in 
the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 
170.240(d)(6)],
When handlers use enclosed cabs or aircraft in a manner that meets 
the requirements listed in the (WPS) for agricultural pesticides [40 CFR 
170.240(d)(4-6)], the handler PPE requirements may be reduced or 
modified as specified in the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum, using tobacco
or using the toilet.
• Remove clothing/PPE immediately if pesticide gets inside. Then
wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product. Wash
the outside of gloves before removing. As soon as possible, wash
thoroughly and change into clean clothing.
2935-553
08/31/2016

Base Camp® LV6, page 2 of 1 1
ENVIRONMENTAL HAZARDS PRODUCT INFORMATION
This pesticide may be toxic to fish and aquatic invertebrates. Do not apply 
directly to water, or to areas where surface water is present, or to intertidal 
areas below the mean high water mark. Drift and runoff may be hazardous 
to aquatic organisms in water adjacent to treated areas. Do not contaminate 
water when disposing of equipment washwaters or rinsate. Apply this 
product only as directed on label.
This chemical has properties and characteristics associated with chemicals 
detected in groundwater. The use of this chemical in areas where soils 
are permeable, particularly where the water table is shallow, may result in 
groundwater contamination. Application around a cistern or well may result 
in contamination of drinking water or groundwater.
Most cases of groundwater contamination involving phenoxy herbicides 
such as 2,4-D have been associated with mixing/loading and disposal sites. 
Caution should be exercised when handling 2,4-D pesticides at such sites 
to prevent contamination of groundwater supplies. Use of closed systems 
for mixing or transferring this pesticide will reduce the probability of spills. 
Placement of the mixing/loading equipment on an impervious pad to contain 
spills will help prevent groundwater contamination.
PHYSICAL AND CHEMICAL HAZARDS
Do not use or store near heat or open flame.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent 
with its labeling.
Do not apply this product in a way that will contact workers or other persons, 
either directly or through drift. Only protected handlers may be in the area 
during application. For any requirements specific to your State or Tribe, 
consult the agency responsible for pesticide regulation.
Do not apply this product through any type of irrigation system.
Use of this product in certain portions of California, Oregon, and Washington 
is subject to the January 22, 2004 Order for injunctive relief in Washington 
Toxics Coalition, et. Al. v. EP, C01— 132C, (W.D. WA). For further 
information, please refer to http://www.eoa.aov/esDD/wtc.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the 
Worker Protection Standard, 40 CFR Part 170. This Standard contains 
requirements for the protection of agricultural workers on farms, forests, 
nurseries, and greenhouses, and handlers of agricultural pesticides. 
It contains requirements for training, decontamination, notification, 
and emergency assistance. It also contains specific instructions 
and exceptions pertaining to the statements on this label about 
personal protective equipment (PPE) and restricted entry interval. The 
requirements in this box only apply to uses of this product that are 
covered by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted 
entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permitted under the 
Worker Protection Standard and that involves contact with anything that 
has been treated, such as plants, soil, or water, is:
• Coveralls
• Chemical-resistant gloves made of any waterproof material
• Shoes plus socks
• Protective eyewear
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT 
within the scope of the Worker Protection Standard for agricultural 
pesticides (40 CFR Part 170). The WPS applies when this product 
is used to produce agricultural plants on farms, forests, nurseries, or 
greenhouses.
Do not allow people (or pets) to enter the treated area until sprays 
have dried.
The performance of Base Camp® LV 6 may be affected by local 
conditions, crop varieties, and application method. User should consult 
local extension service, agricultural experiment station or university weed 
specialists, and state regulatory agencies for recommendations in your 
area.
Best results are obtained when Base Camp LV 6 is applied to young 
succulent weeds that are actively growing. The lower specified rates will 
be satisfactory on susceptible annual weeds. For perennial weeds and 
conditions found in very dry areas of the western states, where control is 
difficult, the higher specified rates should be used.
When Base Camp LV 6 is used for weed control in crops, the growth 
stage of the crop must be considered.
Some plants and weeds, especially woody varieties, are difficult to control 
and may require repeat applications.
Apply 1 to 5 gallons of total spray by air or 5 to 25 gallons by ground 
equipment unless otherwise directed. In either case, use the same 
amount of 2,4-D per acre, as specified in the ensuing use rates.
For crop uses, do not mix with oil, ourfoctanto or other adjuvants unlcoo 
speeiftoaiiy reeommendod. Such combinations tank mixing Base Camp 
LV 6 with oil, surfactants or other adjuvants may reduce the herbicide's 
selectivity and could result in crop damage.
Many states have regulations concerning aerial application of
2,4-D formulations. Consult local regulatory authorities before making 
applications. Although this product is a low volatile formulation, 
temperatures above 90°F may release vapors that can result in damage 
to susceptible crops growing nearby.
Base Camp LV 6 should not be allowed to come into contact with 
desirable, susceptible plants such as beans, cotton, fruit trees, grapes, 
legumes, ornamentals, peas, tomatoes, and other vegetables.
Base Camp LV 6 should not be used in greenhouses. Excessive amounts 
of this product in the soil may temporarily inhibit seed germination and all 
plant growth.
If stored below freezing, efficacy is not affected if product is warmed to 
40°F and agitated before using.
Spray equipment that is used to apply any 2,4 D products should not be 
used for any other purpose until thoroughly cleaned.
Spray Preparation:
Add the specified amount of Base Camp LV 6 to approximately one-half 
the volume of water to be used for spraying. Agitate well, then add the 
remainder of the water. Continue agitation during application until spray 
tank is empty.
TANK MIXING PRECAUTIONS:
• Read carefully and follow all applicable use directions, precautions 
and limitations on the respective product labels.
• Do not exceed the specified label use rates. Do not tank mix with 
another pesticide product that contains the same active ingredient as 
this product unless the label of either tank mix partner specifies the 
maximum dosage that may be used.

Base Camp® LV6, page 3 of 1 1
Use in Liquid Nitrogen Fertilizer:
Base Camp LV 6 may be combined with liquid nitrogen fertilizer suitable for 
foliar application on corn, grass, pastures, or small grains in one operation. 
Use Base Camp LV 6 according to directions on this label for those crops. 
Use liquid nitrogen fertilizer at rates recommended by supplier or Extension 
Service Specialist. Mix the Base Camp LV 6 and fertilizer according to the 
following instructions:
Fill the spray tank approximately one-half full with the liquid nitrogen 
fertilizer. Add the Base Camp LV 6 while agitating the tank. Add the 
remainder of the fertilizer while continuing to agitate. Apply immediately, 
maintaining agitation during application until tank is empty. DO NOT APPLY 
DURING COLD (NEAR FREEZING) WEATHER. Spray mixture must be 
used immediately and must not be stored.
Note: If adequate and continuous agitation is not maintained, separation of 
the spray mixture and/or clogging of the nozzles is likely to occur.
SPRAYER CLEAN OUT
To avoid injury to desirable plants, equipment used to apply
Base Camp LV 6 should be thoroughly cleaned before re-use or applying
other chemicals.
• Rinse and flush application equipment thoroughly after use at least 
three times with water. Dispose of all rinse water by application to 
treatment area or apply to non-cropland area away from water 
supplies.
• During the second rinse, add 1 quart of household ammonia for every 
25 gallons of water. Circulate the solution through entire system so 
that all internal surfaces are contacted (15-20 minutes). Let the 
solutions stand for several hours, preferably overnight.
■ Flush the solution out of the spray tank through the boom.
• Rinse the system twice with clean water, recirculating and draining 
each time.
• Remove the nozzles and screens and clean separately.
• If equipment is to be used to apply another pesticide or agricultural 
chemical to a 2,4-D susceptible crop, additional steps may be required 
to remove all traces of 2,4-D including cleaning of disassembled parts 
and replacement of hoses or other fittings that may contain absorbed
2,4-D.
SPRAY DRIFT MANAGEMENT
A variety of factors including weather conditions (e.g., wind direction, wind 
speed, temperature, relative humidity) and method of application (e.g., 
ground, aerial, airblast, chemigation) can influence pesticide drift. The 
applicator must evaluate all factors and make appropriate adjustments 
when applying this product.
Droplet Size
When applying sprays that contain 2,4-D as the sole active ingredient, 
or when applying sprays that contain 2,4-D mixed with active ingredients 
that require a coarse or coarser spray, apply only as a coarse or coarser 
spray (ASAE standard 572) or a volume mean diameter of 385 microns or 
greater for spinning atomizer nozzles.
When applying sprays that contain 2,4-D mixed with other active ingredients 
that require a medium or more fine spray, apply only as a medium or 
coarser spray (ASAE standard 572) or a volume mean diameter of 300 
microns or greater for spinning atomizer nozzles.
Wind Speed
Do not apply at wind speeds greater than 15 mph. Only apply this product 
if the wind direction favors on-target deposition and there are not sensitive 
areas (including, but not limited to, residential areas, bodies of water, 
known habitat for non-target species, non-target crops) within 250 feet 
downwind. If applying a medium spray, leave one swath unsprayed at the 
downwind edge of the treated field.
Temperature Inversions
If applying at wind speeds less than 3 mph, the applicator must determine 
if: a) conditions of temperature inversion exist or b) stable atmospheric 
conditions exist at or below nozzle height. Do not make applications into 
areas of temperature inversions or stable atmospheric conditions.
2,4-D esters may volatize during conditions of low humidity and high 
temperatures. Do not apply during conditions of low humidity and high 
temperatures.
Susceptible Plants
Do not apply under circumstances where spray drift may occur to food, 
forage, or other plantings that might be damaged or crops thereof rendered 
unfit for sale, use or consumption. Susceptible crops include, but are 
not limited to cotton, okra, flowers, grapes (in growing stage), fruit trees 
(foliage), soybeans (vegetative stage), ornamentals, sunflowers, tomatoes, 
beans, and other vegetables, or tobacco. Small amounts of spray drift that 
might not be visible may injure susceptible broadleaf plants.
Other State and Local Requirements
Applicators must follow all state and local pesticide drift requirements 
regarding application of 2,4-D herbicides. Where states have more 
stringent regulations, they must be observed.
Equipment
All aerial equipment and ground application equipment must be properly 
maintained and calibrated using appropriate carriers or surrogates.
For aerial equipment, the boom length must not exceed 75% of the 
wingspan or 90% of the rotor blade diameter.
Release spray at the lowest height consistent with efficacy and flight 
safety. Do not release spray at a height greater than 10 feet above the 
crop canopy unless a greater height is required for aircraft safety. This 
requirement does not apply to forestry or rights-of-way applications.
When applications are made in a crosswind, the swath will be displaced 
downwind. The applicator must compensate for this by adjusting the path 
of the aircraft upwind.
For ground boom application, do not apply with a nozzle height greater 
than 4 feet above the crop canopy.
Use low-pressure sprays to minimize drift. Where states have regulations 
that specify minimum spray volumes, they should be observed.
APPLICATION INSTRUCTIONS
Spray volume: Apply with calibrated air or ground equipment using 
sufficient spray volume to provide adequate coverage of target weeds or 
as otherwise directed in specific use directions. For broadcast application, 
apply the specified rate of Base Camp LV 6 in a spray volume of 2 or 
more gallons per acre by air and 10 or more gallons per acre for ground 
equipment. In general, spray volume should be increased as crop canopy, 
height and weed density increase in order to obtain adequate spray 
coverage. Do not apply less than 2 gallons total spray volume per acre.
Use Rates: Generally, lower rates in specified rate ranges will be 
satisfactory for more sensitive weeds species, when weeds are small, and 
when environmental conditions are favorable for rapid growth. Use higher 
rates in the specified rate range for less sensitive species and under less 
favorable growing conditions. For orop aeee.-de not mix w ith emuioifiobie 
oi! or other adjuvants unless specifically recommended on this iabci. Deep- 
rooted perennial weeds such as Canada thistle, field bindweed and many 
woody plants usually require repeated applications for effective control.
Spot Treatments: To prevent misapplication, spot treatments should be 
applied with a calibrated boom or with hand sprayers using a fixed spray 
volume per 1,000 sq. ft. as indicated below.
Hand-Held Sprayers: Hand-held sprayers may be used for spot 
applications of Base Camp LV 6. Care should be taken to apply the spray 
uniformly and at a rate equivalent to a broadcast application. Application 
rates in the table are based on the application rate for an area of 1,000 sq. 
ft. Mix the amount of Base Camp LV 6 (fl. oz. or ml) corresponding to the 
desired broadcast rate in 1 to 3 gallons of spray. To calculate the amount of 
Base Camp LV 6 required for larger areas, multiply the table value (fl. oz. 
or ml) by the thousands of sq. ft. to be treated. An area of 1,000 sq. ft. is 
approximately 10.5 x 10.5 yards (strides) in size.

Perennial Weeds (cont.)
Base Camp® LV 6, page 4 of 1 1
Rate Conversion Table for Spot Treatment:
Label Broadcast Rate (pt/acre)
1/3 1/2 2/3 1 1-1/3 2 2-2/3 5-1/3
Equivalent Amount of Base Camp LV 6 per 1000 sq. ft.
1/8 
fl. oz.’
1/5 
fl. oz.
1/4 
fl. oz.
3/8 
fl. oz.
1/2 
fl. oz.
3/4 
fl. oz.
1
fl. oz.
2
fl. oz.
(3.7 ml) (5.9 ml) (7.4 ml) (11 ml) (15 ml) (22 ml) (30 ml) (60 ml)
tConversion factors: 1 pt. = 16 fl. oz.; 1 fl oz = 29.6 (30) ml
USE SITES
bullnettle (1 )(2 ) 
carrot, wild ( 1) 
catnip 
chicory 
clover, red 
coffeeweed 
cress, hoary<’• 
dandelion 
dock| 1 ) 
dogbane ( 1)
onion, wild ( 1 >
pennywort
plantain
ragwort, tansy (1 > 
sowthistle, perennial 
thistle, Canada <1)<2) 
vervain <1) 
wormwood
(1 )Difficult-to-Control Weeds: These weeds are only partially controlled and 
may require repeat applications and/or use of the higher specified rate of 
Base Camp LV 6 even under ideal conditions of application.
Base Camp LV 6 is used to control broadleaf weeds in cereal crops, corn, 
and sorghum; weeds and brush in rangeland, pastures, rights-of-way, and 
other listed non-crop uses.
WEEDS CONTROLLED
Annua! or Biennial Weeds
beggartick( 1)
bittercress, small-flowered( 2 ) 
bitterweed
broomweed, common <1) 
burdock, common 
buttercup, small-flowered <1)(2) 
carpetweed 
cinquefoil, common121 
cinquefoil, rough <2) 
cocklebur, common 
coffeeweed 
copperleaf, Virginia121 
croton, Texas 
croton, woolly 
fixweed 
galinsoga
geranium, Carolina< z| 
hemp, wild
horseweed (marestail)< 2) 
jewelweed 
jimsonweed 
knotweed 1,1 
kochia
lambsquarter, common 
lettuce, prickly ( 1 ) ( 2 > 
lettuce, wild 
lupines
mallow, little ( 1 ) 
mallow, Venice ( 11 
marshelder 
morningglory, annual 
morningglory, ivy 
morningglory, woolly
Perennial Weeds
alfalfa <1><2>
artichoke, Jerusalem( 1 ) 
aster, many-flower|1 )
Austrian fieldcress |1 ) 
bindweed (hedge, field and Ei 
blue lettuce 
blueweed, Texas 
broomweed
<2) Base Camp LV 6 may not be used to control this weed species in the 
state of California.
CROPS
CEREAL GRAINS (Wheat, Barley, Millet, Oats, Rye)
(Not Underseeded with Legumes)
CROP/APPLICATION
TIMING
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Wheat, Barley, Millet, 
Rye
Annual and biennial 
Broadleaf weeds
Perennial broadleaf 
weeds
1/3 to 1-1/31 
2/3 to 1-1/3 t
Apply after crop is fully 
tillered and before boot 
stage of growth (usually 
4 to 8 inches tall) but not 
forming joints in the 
stem. Do not apply 
before tillering or from 
early boot through the 
milk stage of growth.
Oats
(Spring Seeded)
(Fall Seeded Southern)
1/3
1/2 to 1 f
Apply after crop is fully 
tillered and before boot 
stage of growth (usually 
4 to 8 inches tall) and 
weeds are small. Do not 
apply before tillering or 
from early boot through 
the milk stage of growth. 
Do not apply during or 
immediately following 
cold weather.
Preharvest application 
(all cereals)
2/3 Apply using air or ground 
equipment to control 
weeds that could 
interfere with harvest, or 
to suppress perennial 
weeds. Apply when grain 
is in dough stage. Do not 
apply from early boot 
through the milk stage of 
growth.
t Use the lower rate in the rate range if small annual or biennial weeds 
are the major problem. Use the higher rate if perennial weeds or annual 
or biennial weeds are present which are considered to be hard-to-kill as 
determined by local experience. Higher rates increase the risk of crop 
injury and should be used only where weed control justifies such risk. Do 
not apply Base Camp LV 6 at the crop seedling stage of growth. Consult 
state agricultural experiment station or extension service weed specialists 
for recommendations or suggestions to fit local conditions.
mousetail( 2 )
mustards (except blue mustard) 
parsnip, wild 
pennycress (fanweed) 
pepperweed (Lepidium spp.) (,K2> 
pigweed (Amaranthus spp .)l’> 
poorjoe
primrose, common 
purslane, common ( 2 ) 
pusley, Florida 
radish, wild 
ragweed, common 
ragweed, giant 
rape, wild 
rocket, yellow 
salsify, common <1) 
salsify, western ( 11 
shepherdspurse 
sicklepod
smartweed (annual species) (1 ) ( 2 >
sneezeweed, bitter
sowthistle, annual
sowthistle, spiny
spanishneedle
sunflower
sweetclover
tansymustard
thistle, bull
thistle, musk <11
thistle, Russian (tumbleweed)|1 )
velvetleaf
vetch
eveningprimrose, cutleaf(2 )
garlic, wild
goldenrod
hawkweed, orange 111 
< 1 ) ( 2 ) heaiall
ironweed, western ( 2 ) 
ivy, ground( 1 )
nettles (including stinging)( 1 )

Base Camp® LV 6, page 5 of 1 1 
CEREAL GRAIN RESTRICTIONS:
Postemergence:
• Do not make more than one application per crop cycle.
• Do not apply more than 29.0 fluid ounces per acre per application.
Preharvest:
• Do not make more than one application per crop cycle.
• Do not apply more than 11.6 fluid ounces per acre per application.
PreHarvest Interval is 14 days.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
1.75 pounds of a.e. per acre per year.
CORN
(Field Corn, Popcorn and Sweet Corn)
APPLICATION 
TIMING/STAGE 
OF GROWTH
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Preplant 2/3 to 1-1/3 General: For best results,
(Burndown) growth conditions should 
be favorable for active
Preemergence weed growth. Use the high
(Field corn, rate in rate range for less
popcorn, and sweet susceptible weeds, cover
corn) crops such as alfalfa, weeds 
in advanced stages of 
development, or under less 
favorable growth conditions. 
Preplant: Apply 7 to 14 
days before planting corn to 
control emerged broadleaf 
weed seedling or existing 
cover crops.
Preemergence: Apply 
any time after planting, 
but before corn emerges 
to control broadleaf weed 
seedlings or existing cover 
crops. Do not use on light 
sandy soils.
Postemergence Apply when weeds are small
(Field corn, and corn is less than 8
popcorn, and sweet inches tall (to top of
corn) canopy). If corn is more
Annual broadleaf than 8 inches tall, use drop
weeds 1/3 to 2/3 nozzles to keep spray off
Crop up to 8 foliage. Treat perennial
inches tall weeds when they are in bud 
to bloom stage.
Crop 8 inches tall 2/3 Do not tank mix with
to tasseling atrazine, oil or other
(directed spray adjuvants.
only) Do not apply from tasseling
Perennial 2/3 to hard dough stage.
broadleaf weeds Note: Corn treated with 
2,4-D may become 
temporarily brittle. Wind or 
cultivation may cause stem 
breakage during the period 
of time that corn is brittle. 
Sweet Com: To minimize 
potential for crop injury, 
use only lowest rate in rate 
range.
Preharvest up to 2 Apply after corn is in hard
(Field com and dough (or denting) stage.
popcorn only) Do not apply to sweet corn.
• Preplant or preemergence applications to light sandy soil are not 
recommended.
• Corn hybrids vary in tolerance to 2,4-D. Some are easily injured. Apply 
only to varieties known to be tolerant to 2,4-D. Consult the seed 
company or your agricultural experiment station or extension service 
weed specialist for this information.
• Note: Corn treated with 2,4-D may exhibit stem brittleness for 8-10 
days following application. During this period, the crop is more 
susceptible to stem breakage from cultivation or wind.
CORN RESTRICTIONS:
Preplant or Preemergence:
• Do not make more than one application per crop cycle.
• Do not apply more than 23.2 fluid ounces per acre per application. 
Postemergence:
• Do not make more than one application per crop cycle.
• Do not apply more than 11.6 fluid ounces per acre per application.
Minimum spray interval between applications for sweet corn is 21 days.
Do not use treated crop as fodder for 7 days following application. 
Preharvest (Field and Popcorn Only):
• Do not make more than one application per crop cycle.
• Do not apply more than 34.8 fluid ounces per acre per application.
• Corn (Field and Pop): PreHarvest Interval is 7 days.
• Corn (Sweet): Preharvest Interval is 45 days.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
3.0 pounds of a.e. per acre per year for field and popcorn. Do not exceed a 
combined total of 1.5 pounds of a.e. per acre for sweet corn.
SORGHUM
(Grain Sorghum (Milo) and Forage Sorghum)
APPLICATION 
TIMING/STAGE 
OF GROWTH
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Postemergencet 
Crop 6 - 8 inches tall
Crop 8 - 1 5 inches tall 
(directed spray only)
1/3 to 2/3 
1/2 to 2/3
Apply when sorghum is 
6 to 15 inches tall. If 
sorghum is more than 8 
inches tall (top of 
canopy), use drop 
nozzles to keep spray off 
foliage.
Do not use with oil or 
other adjuvants.
Do not treat during boot, 
flowering or dough stage.
Precautions:
• Note: Temporary crop injury can be expected under conditions of high 
soil moisture and high air temperatures. If it is necessary to apply 
Base Camp LV 6 under these conditions, do not use more than 1/2 
pint per acre.
• Sorghum hybrids vary in tolerance to 2,4-D. Some are easily injured. 
Apply only to varieties known to be tolerant to 2,4-D. Consult the seed 
company or your agricultural experiment station or extension service 
weed specialist for this information.

Base Camp® LV 6, page 6 of 1 1
SOYBEANS
For Use in Crop Residue Management Systems 
(Preplant Burndown Application Only)
APPLICATION
TIMING
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Preplant (Burndown) 1/2 to 2/3 Apply not less than 7 
days before planting 
soybeans. See Use 
Restrictions below.
2/3 to 1-1/3 Apply not less than 15 
days before planting 
soybeans.
See Use Precautions 
and Restrictions 
below.
General Use Directions: Use Base Camp LV 6 to control 
emerged broadleaf weeds or existing cover crops. For best 
results, apply when weeds are small and actively growing. Use 
the higher rate in the respective rate range for larger weeds and 
when perennials are present. Compatible crop oil concentrates, 
agricultural surfactants and fluid fertilizers approved for use on 
growing crops may be added to spray mixtures to increase the 
herbicidal effectiveness on certain weeds. Read and follow all 
directions and precautions on this label and on the label of each 
product added to the spray mixture.
SOYBEAN RESTRICTIONS:
Preplant (2 application option):
• Do not apply more than 11.6 fluid ounces per acre per preplant 
application.
• Do not apply within 7 days of planting soybeans.
Preplant (single application option):
• Do not apply more than 23.2 fluid ounces per acre.
• Do not apply within 15 days of planting soybeans.
Do not use on sandy soils with less than 1% organic matter.
Do not replant fields treated with Base Camp LV 6 in the same growing 
season with crops other than those labeled for use with Base Camp LV 6.
Livestock Feeding Restrictions: Do not feed hay, forage or fodder. Restrict 
livestock from grazing treated fields. Do not allow livestock to feed or graze 
on treated cover crops.
In fields previously treated with Base Camp LV 6, plant soybean seed as 
deep as practical or at least 1 inch deep. Adjust the planter, if necessary, to 
ensure that planted seed is completely covered.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
1.0 pounds of a.e. per acre per crop cycle.
ORNAMENTAL TURF
(Excluding Grasses Grown For Seed or Sod Farms)
(Includes lawns, golf courses, cemeteries and parks, airfields, roadsides, 
and vacant lots)
Use Requirements for Ornamental Turf Areas: When this product is 
applied to ornamental turf areas, follow PPE and reentry instructions 
in the “Non-agricultural Use Requirements” section of this label.
TREATMENT
SITE(APPLICATION
TIMING)
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Ornamental turf 
(Postemergence)
Apply when weeds 
are small and actively 
growing. For best
Seedling grass (five- 
leaf stage or later)
1/2 to 2/3 results, apply when 
soil moisture is 
adequate for active
Well-established
grasses
1-1/3 to 2 weed growth. 
Deep-rooted 
perennial weeds such
Biennial and 
perennial broadleaf 
weeds
2 as bindweed and 
Canada thistle 
may require repeat 
applications.
Do not apply to newly 
seeded grasses until 
well established (five- 
leaf stage or later) 
and then use a 
maximum of 2/3 pints 
per acre. Cool season 
grasses are tolerant 
of higher rates.
PRECAUTIONS:
• Do not use on creeping grasses such as bentgrass except for spot 
treatment
• Do not use on susceptible southern grasses such as St. Augustine.
• Do not use on dichondra or other herbaceous ground covers; legumes 
may be damaged or killed.
• Reseeding: Delay reseeding at least 30 days following application. 
Preferably, for spring applications reseed in the fall and for fall 
applications, reseed in the spring.
ORNAMENTAL TURFGFtASS RESTRICTIONS:
• Do not apply more than 34.8 fluid ounces per acre per application.
• Do not make more than 2 applications per year.
• Minimum spray interval between broadcast applications is 30 days.
• If grazing or haying is anticipated, do not apply more than 2 pints per 
acre per application. Do not harvest grass for hay from treated areas 
for 7 days after application.

Base Camp® LV 6, page 7 of 1 1
GRASSES GROWN FOR SEED OR SOD FARMS
Agricultural Use Requirements: When used in grass grown for seed or 
sod farms, follow PPE and reentry instructions in the “Agricultural Use 
Requirement” section of this label.
TREATMENT SITE 
(APPLICATION 
TIMING)
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Grasses grown for 
seed
(Postemergence Use) 
Seedling grass 
(five-leaf stage or 
later)
Well-established
grasses
1/2 to 2/3 
2/3 to 2-2/3
Apply when weeds are 
small and actively growing. 
For best results, apply 
when soil moisture is 
adequate for active weed 
growth.Do not apply to 
newly seeded grasses until 
well established (five-leaf 
stage or later) and then use 
a maximum of 2/3 pints per 
acre. Cool season grasses 
are tolerant of higher rates. 
Do not apply to grass in 
the early boot through milk 
stage if seed production is 
desired.When grass is well 
established, higher rates of 
up to 2-2/3 pints per acre 
may be applied for control 
of hard-to-kill annual or 
perennial weeds. 
Deep-rooted perennials 
such as bindweed and 
Canada thistle may require 
repeat applications. Avoid 
mowing sod farms for 1 
to 2 days before or after 
application.
Delay irrigation until the 
day following application.
Sod Farms 
(Postemergence) 1/3 to 2-2/3
PRECAUTIONS:
• Do not use on creeping grasses such as bentgrass except for spot 
treatment.
• Do not use on susceptible southern grasses such as St. Augustine.
• Do not use on dichondra or other herbaceous ground covers; legumes 
may be damaged or killed.
• Reseeding: Delay reseeding at least 30 days following application. 
Preferably, with spring application reseed in the fall and with fall 
applications, reseed in the spring.
Grasses Grown for Seed or Sod Restrictions:
• Do not make more than 2 applications per year.
• Do not apply more than 46.4 fluid ounces per acre per application.
• Minimum of 21 days between applications.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
4.0 pounds of a.e. per acre per year (excluding spot treatments).
FALLOW LAND AND CROP STUBBLE
Fallow land is idle land, postharvest to crops or between crops.
TYPE OF WEEDS Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Annual broadleaf 
weeds
2/3 to 1-1/3 Use a lower rate in the rate 
range when weeds are small 
(2 to 3 inches tall) and 
actively growing. Use a 
higher rate in the rate range 
when weeds are larger and 
under less favorable growth 
conditions.
Biennial broadleaf 
weeds
1-1/3 to 2-2/3 Apply when musk thistles or 
other biennial species are in 
the seedling to rosette stage 
and before development of 
flower stalks.The lower rate 
can be used in the spring 
during the rosette stage. Use 
the highest rate in the fall or 
after flower stalks have 
developed.
Perennial broadleaf 
weeds
1-1/3 to 2-2/3 Apply when perennial weeds 
are in bud to early bloom 
stage or while in good 
vegetative growth.
Wild gariic and onion 
in crop stubble
2-2/3 Apply to new regrowth of wild 
garlic or onion that occurs in 
the fall after harvest of other 
crops.
Precaution: For best weed control results, do not cultivate for at least 2 
weeks after application or until top growth is dead.
FALLOW LAND RESTRICTIONS:
• Do not make more than two applications per year.
• Do not apply more than 2-2/3 pints per acre per application.
• Minimum spray interval between applications is 30 days.
• Plant only labeled crops within 30 days following last application.
• If grass is to be cut for hay, Agricultural Use Requirements for the 
Worker Protection Standard are applicable.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
4.0 pounds of a.e. per acre per year.

Base Camp® LV 6, page 8 of 1 1
RANGELAND, ESTABLISHED GRASS PASTURES
Including Perennial Grasslands Not In Agricultural Production Such As
Conservation Reserve Program Acres
TARGET WEEDS OR 
WOODY PLANTS
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Annual broadleaf 
weeds
Biennial and 
perennial broadleaf 
weeds
1-1/3
1-1/3 - 2-2/3
For best results, apply 
when weeds are small and 
growing actively before 
the bud stage. Apply when 
musk thistles or other 
biennial species are in the 
seedling to rosette stage 
and before flower stalks 
appear. Refer to the 
“Weeds Controlled” 
section for a listing of 
susceptible weed species 
and weeds that may be 
only partially controlled 
and require repeat 
applications and/or 
use of higher specified 
rates, even under ideal 
conditions of application.
Spot Treatment to 
control broadleaf 
weeds
See instructions 
for "Spot 
Treatment”
Note: To control broadleaf 
weeds in small areas with 
a hand sprayer, use an 
application rate equivalent 
to the broadcast rate 
specified for this treatment 
site and spray to 
thoroughly wet all foliage. 
See rate conversion table 
and instructions for "Spot 
Treatment” and use of 
hand-held sprayers under 
“Application’’.
Tree Injection 
Application
See instructions for tree 
injection application in 
“Forestry Uses” section.
Wild garlic and wild 
onion
2-2/3 Make three applications 
(fall-spring-fall or spring- 
fall-spring) starting in late 
fall or early spring.
Broadleaf weed 
control in newly 
sprigged coastal 
bermudagrass
1-1/3-2-2/3 Applications may be made 
either preemergence or 
postemergence. Follow 
“Specific Use Directions” 
for annual, biennial and 
perennial broadleaf weed 
control, above.
Sand shinnery oak 
Sand sagebrush
1-1/3 Sand shinnery oak: Apply 
by aircraft between 
May 15 and June 15.
Sand sagebrush: Apply 
by ground or aircraft when 
foliage is fully expanded 
and plants are actively 
growing.Use a 1:4 oil- 
water emulsion as carrier 
and a spray volume of 3 
to 5 gallons per acre. 
Retreatment may be 
needed.
TARGET WEEDS OR 
WOODY PLANTS
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Big sagebrush 
Rabbitbrush
Chamise, manzanita, 
buckbrush, coastal 
sage, coyotebrush, 
and chaparral 
species.
Up to 2-2/3
Apply by ground or 
aircraft when foliage 
is fully expanded and 
plants are actively 
growing. Use water or 
1:4 oil-water emulsion 
as carrier and a spray 
volume of 5 to 10 
gallons per acre. 
Retreatment may be 
needed.
Southern wild rose 
Broadcast application
Spot Treatment
Up to 2-2/3
46.4 fl. oz. per 100 
gal. of spray
Broadcast: Apply in a 
spray volume of 5 or 
more gallons per acre 
by aircraft or 10 or 
more gallons per acre 
by ground equipment. 
Spot Treatment:
Apply when foliage 
is well developed. 
Thorough coverage 
is required. Use 2/3 
gallon of
Base Camp LV 6 plus 
4 to 8 fluid ounces of 
an agricultural 
surfactant per 100 
gallons of water. Two 
or more treatments 
may be required.
Do not exceed 2/3 
gal. per acre per 
application.
CRP Acres For program lands such as CRP, consult 
program rules to determine whether grass or 
hay may be used. The more restrictive 
requirements of the program rules or this label 
must be followed.
Precautions:
• Do not use on bentgrass, alfalfa, clover, or other legumes.
• Do not use on newly seeded areas until grass is well established.
• Do not use from early boot to milk stage where grass seed production 
is desired.
RANGELAND & PASTURE RESTRICTIONS:
Livestock Feeding Restrictions:
• Do not graze dairy animals on treated areas within 7 days after 
application.
• Do not graze meat animals on treated areas within 3 days before 
slaughter.
• Do not cut forage for hay within 7 days of application.
• For government program grasslands, follow program grazing 
restrictions if more restrictive than those given above.
When tank mixing with products that contain 2,4-D, do not exceed a 
combined total of 4.0 pounds of a.e. per acre per year.

Base Camp® LV 6, page 9 of 1 1
For susceptible annual and biennial broadleaf weeds do not exceed 23.2 
fluid ounces per acre per application.
For moderately susceptible biennial and perennial broadleaf weeds and 
woody plants, do not exceed 46.4 fluid ounces per acre per application. 
For spot treatment do not exceed 46.4 fluid ounces per acre.
Do not make more than 2 applications per year.
Minimum spray interval between applications is 30 days.
If grass is to be cut for hay, Agricultural Use Requirements for the Worker 
Protection Standard apply.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
4.0 pounds of a.e. per acre per year.
POTATOES
Fresh Market Only
APPLICATION 
TIMING/STAGE 
OF GROWTH
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Postemergence 1/10 pt
(1.6 fl. oz.)/acre
Make first application when 
potatoes are in the pre-bud 
stage (about 7 to 10 inches 
high) and make a second 
application about 10 to 14 days 
later.
POTATO RESTRICTIONS:
• Preharvest Interval: Do not harvest within 45 days of application.
• Do not apply more than 0.07 lbs a.e. (1/10 pint per acre) of 
Base Camp LV 6 per application.
• Do not exceed two applications per crop.
• A minimum of 10 days between applications is required.
• Do not apply more than 0.14 lbs a.e. (1/5 pint per acre) of 
Base Camp LV 6 per growing season.
TREATMENT 
SITE METHOD 
OF APPLICATION
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Spot Treatment 
to control 
broadleaf weeds
See Instructions 
for "Spot 
Treatment”
Note: To control broadleaf 
weeds in small areas with a 
hand sprayer, apply a use rate 
equivalent to the broadcast rate 
specified for this treatment site 
and spray to thoroughly wet all 
foliage. See rate conversion 
table and instructions for 
“Spot Treatment” and use of 
hand-held sprayers under 
“Application”
Tree Injection 
Application
See instructions for tree 
injection in "Forestry Uses” 
section.
Southern wild 
rose
Broadcast
application
Spot Treatment
Up to 2-2/3
2/3 gal. per 100 
gal. of spray
Broadcast: Apply in a spray 
volume of 5 or more gallons per 
acre by aircraft or 10 or more 
gallons per acre by ground 
equipment. Apply when foliage 
is well developed. Thorough 
coverage is required. Use 2/3 
gallons of Base Camp LV 6 
plus 4 to 8 fluid ounces of an 
agricultural surfactant per 100 
gallons of water. Two or more 
treatments may be required.
Precautions:
•Do not apply to newly seeded areas until grass is well established. 
•Bentgrass, St. Augustine, clover, legumes and dichondra may be 
severely injured or killed by this treatment.
NON-CROPLAND AREAS
Fencerows, Hedgerows, Roadsides, Right-Of-Way, Utility Power Lines, 
Railroads, and Airports
TREATMENT 
SITE METHOD 
OF APPLICATION
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Annual broadleaf 
weeds
Biennial and 
perennial 
broadleaf weeds 
and susceptible 
woody plants
1 1/3-2-2/3 Apply when annual weeds are 
small and growing actively 
before the bud stage. Biennial 
and perennial weeds should 
Up to 2-2/3 be rosette to bud stage, but 
not flowering at the time of 
application. For difficult to 
control perennial broadleaf 
weeds and woody species, 
tank mix up to 23.2 fluid 
ounces of Base Camp LV 6 
plus 1 to 4 qts. of 
Garlon® 3A herbicide per acre. 
Oil or wetting agent may be 
added to the spray, if needed 
for increased effectiveness. 
For ground application: (high 
volume) apply a total spray 
volume of 100 to 400 gallons 
per acre; (low volume) apply a 
total spray volume of 10 to 
100 gallons per acre.
For helicopter: Apply a total 
spray volume of 5 to 30 
gallons per acre.
NON-CROPLAND RESTRICTIONS:
Postemergence (annual and perennial weeds):
• Do not make more than 2 applications per year.
• Do not apply more than 46.4 fluid ounces per acre per application.
• Minimum spray interval between applications is 30 days. 
Postemergence (woody plants):
• Do not make more than 1 application per year.
■ Do not apply more than 92.8 fluid ounces per acre per application.
Applications to non-cropland areas do not include treatment of commercial 
timber or other plants being grown for sale or other commercial use, or for 
commercial seed production, or for research purposes.
Base Camp LV 6 contains 0.7 pounds a.e. of 2,4-D per pint. When tank 
mixing with products that contain 2,4-D, do not exceed a combined total of 
4.0 pounds of a.e. per acre per year.

Base Camp® LV 6, page 10 of 1 1
FORESTRY USES
Forest site preparation, forest roadsides, brush control, established 
conifer release (including Christmas trees and reforestation areas)
TREATMENT 
SITE METHOD 
OF APPLICATION
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Annual Weeds 1-1/3 to 2-2/3 Apply when weeds are small 
and growing actively before 
the bud stage. Apply when 
biennial and perennial species
Biennial and 
perennial 
broadleaf weeds 
and susceptible 
woody plants
2-2/3 to 5-2/3 are in the seedling to rosette 
stage and before flower stalks 
appear. For difficult to control 
perennial broadleaf weeds 
and woody species, use up 
to 2-2/3 qt of Base Camp LV6 
and 1 to 4 qts. of Garlon 3A 
herbicide per acre. For conifer 
release, make application in 
early spring before budbreak 
of conifers when weeds are 
small and actively growing.
Spot Treatment to See instructions Note: To control broadleaf
control broadleaf for "Spot weeds in small areas with a
weeds Treatment” hand sprayer, apply a use 
rate equivalent to the specified 
broadcast rate and spray to 
thoroughly wet all foliage.
See rate conversion table and 
instructions for “Spot 
Treatment” and use of 
hand-held sprayers under 
“Application”.
Conifer Release: 
Species such 
as white pine, 
ponderosa 
pine, jack pine, 
red pine, black 
spruce, white 
spruce, red 
spruce, and 
balsam fir
2 to 4 To control competing 
hardwood species such as 
alder, aspen, birch, hazel, and 
willow, apply from mild to late 
summer when growth of 
conifer trees has hardened 
off and woody plants are still 
actively growing. Apply with 
ground or air equipment, using 
sufficient spray volume to 
ensure complete coverage. 
Because this treatment may 
cause occasional conifer 
injury, do not apply if such 
injury cannot be tolerated.
Directed 5-2/3 pints per Apply when brush or weeds
Spray: Conifer 
plantations 
including pine
100 gal. are actively growing by 
directing the spray so as to 
avoid contact with conifer 
foliage and injurious amounts 
of spray. Apply in oil, oil-water, 
or water carrier in a spray 
volume of 10 to 100 gallons 
per acre.
TREATMENT 
SITE METHOD 
OF APPLICATION
Base Camp LV 6 
(PT/ACRE)
SPECIFIC USE 
DIRECTIONS
Basal Spray 
(May also 
be used in 
rangeland, 
pastures, and 
non-cropland)
11-1/3 pints per 
100 gal.
or
1.75 fl oz/gal. 
of water
Thoroughly wet the base and 
root collar of all stems until 
the spray begins to 
accumulate around the root 
collar at the ground line. 
Wetting stems with the 
mixture may also aid in 
control.
Surface of Cut 
Stumps (May 
also be used 
in rangeland, 
pastures, and 
noncropland)
Apply as soon as possible 
after cutting trees. Thoroughly 
soak the entire stump with the 
2,4-D mixture including cut 
surface, bark and exposed 
roots.
Frill and Girdle 
(May also be 
used inrangeland, 
pastures,and 
noncropland)
Cut frills (overlapping 
V-shaped notched cut 
downward through the bark in 
a continuous ring around the 
base of the tree) using an axe 
or other suitable tool. Saturate 
the freshly cut frills with the 
2,4-D mixture.
Tree Injection 
Application (May 
also be used 
in rangeland, 
pastures, and 
noncropland)
(1 to 1.4 ml per 
injection site)
To control and prevent 
resprouting of unwanted 
hardwood trees such as elm, 
hickory, oak, and sweetgum 
in forests and other non-crop 
areas, apply by injecting at a 
rate of 1 ml of undiluted Base 
Camp LV 6 per inch of trunk 
diameter as measured at 
breast height (DBH), 
approximately 4.5 ft. above 
the ground. Injection sites, 
however, should be as close 
to the root collar as possible, 
and the injection bit must 
penetrate the inner bark. 
Applications may be made 
throughout the year, but for 
best results apply between 
May 15 and October 15. 
Maples should not be treated 
during the spring sap flow. For 
hard to control species such 
as ash, maple, and dogwood 
use 1.4 ml of undiluted 
Base Camp LV 6 per injection 
site or double the number of 
0.7 ml injections.
Note: No Worker Protection 
Standard worker entry 
restrictions or worker 
notification requirements 
apply when this product is 
directly injected into 
agricultural plants.
Precautions:
• Do not allow sprays to contact conifer shoot growth (current year's 
new growth) or injury may occur.
• Do not apply to nursery seedbeds.
• For conifer release, do not use on plantations where pine or larch are 
among the desired species.

Base Camp® LV 6, page 1 1 of 1 1
FORESTRY RESTRICTIONS:
• Do not make more than one broadcast application per year.
• Do not apply more than 5-2/3 pints per acre per broadcast application.
Basal Spray Cut Surface - Stumps and Frill:
• Limited to one basal spray or cut surface application per year.
• Do not apply more than 8 lbs a.e. per 100 gallons of spray solution.
Injection:
• Limited to one injection application per year.
• Do not apply more than 1.4 ml of undiluted formulation per injection
site.
STORAGE AND DISPOSAL
Do not contaminate water, food or feed by storage or disposal. 
PESTICIDE STORAGE: Open dumping is prohibited. Do not store 
this product near fertilizers, seeds, insecticides, or fungicides. Do not 
store near heat or open flame. Redose all partially used containers 
by thoroughly tightening screw cap. Absorb any spill with a suitable 
clay absorbent and dispose of waste as indicated under “Pesticide 
Disposal.”
For safety and prevention of unauthorized use, all pesticides should be 
stored in locked facilities.
To prevent accidental misuse, different pesticides should be stored in 
separate areas with enough distance between the pesticides to provide 
clear identification.
Opened, partially used pesticides should be stored in original labeled 
containers when possible. When transfer to another container is 
necessary due to leakage or damage, carefully mark and identify 
contents of the new container.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal 
of excess pesticide, spray mixture, or rinsate is a violation of federal law 
and may contaminate groundwater. If these wastes cannot be disposed 
of by use according to label instructions, contact your state Pesticide or 
Environmental Control Agency or the Hazardous Waste Representative 
at the nearest EPA Regional Office for guidance.
CONTAINER DISPOSAL: Non-refillable containers (2.5 gallons, 30 
gallons and 55 gallons): Do not reuse or refill this container. Offer 
for recycling, if available. Triple rinse or pressure rinse container (or 
equivalent) promptly after emptying.
(Non-refillable <5 gallons): Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank and drain 
for 10 seconds after the flow begins to drip. F ill the container 'A full with 
water and recap. Shake for 10 seconds. Pour rinsate into application 
equipment or a mix tank or store rinsate for later use or disposal. Drain 
for 10 seconds after the flow begins to drip. Repeat this procedure two 
more times.
(Non-refillable >5 gallons): Triple rinse as follows: Empty the 
remaining contents into application equipment or a mix tank. Fill the 
container 'A full with water. Replace and tighten closures. Tip container 
on its side and roll it back and forth, ensuring at least one complete 
revolution, for 30 seconds. Stand the container on its end and tip it 
back and forth several times. Turn the container over onto its other 
end and tip it back and forth several times. Empty the rinsate into 
application equipment or a mix tank or store rinsate for later use or 
disposal. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and continue to drain for 10 
seconds after the flow begins to drip. Hold container upside down over 
application equipment or mix tank or collect rinsate for later use or 
disposal. Insert pressure rinsing nozzle in the side of the container and 
rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after 
the flow begins to drip.
STORAGE AND DISPOSALfcont.)
Refillable container (15 gallons, 30 gallons, 120 gallons and 
greater or bulk): Refill this container with pesticide only. Do not reuse 
this container for any other purpose. Cleaning the container before final 
disposal is the responsibility of the person disposing of the container. 
Cleaning before refilling is the responsibility of the refiller.
To clean the container before final disposal, empty the remaining 
contents from the container into application equipment or mix tank. Fill 
the container about 10 percent full with water. Agitate vigorously or 
recirculate water with the pump for 2 minutes. Pour or pump rinsate into 
application equipment or rinsate collection system. Repeat this rinsing 
process two more times.
______________________________________
Conditions of Sale and Limitation of Warranty and Liability:
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation 
of Warranty and Liability before buying or using the product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will 
be refunded.
ALL STATEMENTS MADE HEREIN ARE SUBJECT TO APPLICABLE LAW, 
AND TO THE EXTENT THERE IS ANY INCONSISTENCY OR CONTENTION, 
APPLICABLE LAW SHALL GOVERN.
The Directions for Use of the product must be followed carefully. It is impossible 
to eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness, or other unintended consequences may result because of many 
different factors including, without limitation, manner of use or application, weather, 
combination with other products, or crop conditions. All such risks shall be assumed 
by Buyer and User, and Buyer and User agree to hold Manufacturer and Seller 
harmless from any claims relating to such factors.
Seller warrants that this product conforms to the chemical description on the 
label. EXCEPT FOR THIS WARRANTY, THE PRODUCT IS FURNISHED “AS-IS,” 
AND NEITHER SELLER NOR MANUFACTURER MAKES ANY OTHER 
WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE SELECTION, 
PURCHASE OR USE OF THIS PRODUCT; SELLER AND MANUFACTURER 
SPECIFICALLY DISCLAIM ANY WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE BEYOND WHAT IS STATED ON THE 
LABEL. Buyer and User accept all risks arising from any use of this product, 
including without limitation, uses contrary to label instructions, or under 
conditions not reasonably foreseeable to (or beyond the control of) Seller or 
Manufacturer.
Neither Manufacturer nor Seller shall be liable for any incidental, consequential or 
special damages resulting from the use or handling of this product. THE EXCLUSIVE 
REMEDY OF THE BUYER OR USER, AND THE EXCLUSIVE LIABILITY OF 
MANUFACTURER AND SELLER, FOR ANY AND ALL CLAIMS, LOSSES, INJURIES 
OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, 
CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) 
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE 
RETURN OF THE PURCHASE PRICE OF THIS PRODUCT OR, AT THE ELECTION 
OF MANUFACTURER OR SELLER, THE REPLACEMENT OF THE PRODUCT. 
These Conditions of Sale and Limitation of Warranty and Liability shall be interpreted, 
unless otherwise required by the law of the state of purchase, in accordance with the 
laws of the State of California, excluding its conflicts of laws rules, and may not be 
amended by any oral or written agreement.
WILBUR-ELLIS® Logo, Ideas to Grow With® and Base Camp® are 
registered trademarks, and Actives Tri-Droplet™ Logo is a trademark of 
Wilbur-Ellis Company.
Garlon® is a registered trademark of Dow AgroSciences.
In Case of Emergency, Call CHEMTREC: (800) 424-9300
F-400214
040215
Manufactured for:
WILBUR-ELLIS COMPANY
PO BOX 16458 
FRESNO CA 93755
Batch Code
NET CONTENTS: 2.5 gallons