crop-chem-docs/corpus/epa_ppls/524-473.md

# MON 58425

- EPA Reg No: **524-473**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Warning
- Active ingredients: Acetochlor (75.9%)
- Label accepted: 2013-01-04
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00473-20130104.pdf

---
, , I/
( ' ' C:v A?
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
WASHINGTON, D.C. 20460
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION
Annette Kirk JAN 0 4 2013
Monsanto Company
1300 I St. NW, Suite 450 East
Washington, DC 20005
Subject: Notification per PR Notice 98-10 -Add NY State Restriction and Optional Label
Statements
MON 58425 Herbicide
EPA Reg. No. 524-473
Application Dated - December 3, 2012
Dear Ms. Kirk: '
The Agency is in receipt of your Application for Pesticide Notification under Pesticide
Registration Notice (PRN) 98-10 for the subject product.
The Registration Division (RD) has conducted a review of this request for its applicability
under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10. The
label submitted with the application has been date-stamped "Notification" and will be placed in
our records.
If you have any questions regarding this letter, please contact me at (703) 347-0257 or
rudick.maRgie@epa.gov.
Sincerely,
Maggie Rudick, Product Team 25
Herbicide'Branch
Registration Division (7505P)

Please read instructions on reverse before completing form. Form Approved. OMB'No. 2070-0060. Approval Expires 2-28-95 '37
o EPA United States
Environmental Protection Agency
Washington, DC 20460
Registration
/\| Amendment
Other
OPP Identifier Number
Application for Pesticide - Section i
1. Company/Product Number
Monsanto Company / 524-473
4. Company/Product (Name)
Monsanto Company
MON 58425 herbicide / Harness Herbicide (alternate
brand name) •
2. EPA Product Manager
Kable B. Davis, Team Lead
PM#
25
3. Proposed Classification
|/\ None | ] Restricted
5. Name and Address of Applicant (Include ZIP Code)
Monsanto Company
1300 I (Eye) Street, NW - Suite 450 East
Washington, DC 20005
Check if this is a new address
6 Expedited Review. In accordance with FIFRA Section 3(c)(3) (b)(i), my
product is similar or identical in composition and labeling to:
EPA Reg. No.
Product Name
Section - II
Amendment - Explain below.
Resubmission in response to Agency letter dated
Notification - Explain below.
Final printed labels in response to Agency letter dated:.
"Me Too" Application. )
Other - Explain below.
Explanation: Use additional page(s) if necessary. (For section I and Section II.) PRIA address: REGULATORY.AFFAIRS@MONSANTO.COM
(no PRIA fee required) -
Notification of new Mater Labeling for MON 58425 Herbicide (EPA Reg. No. 524-473) to include prohibition statement
for two counties in NY, and to add in minor contain label optional statement referencing the main label booklet.
Section - III
1. Material This Product Will Be Packaged In:
Child-Resistant Packaging
Yes*
No
* Certification must
be submitted
Unit Packaging
I I Yes
No
If 'Yes" No. per
Unit Packaging wgt. Container
Water Soluble Packaging
Yes
I No
If 'Yes"
Package wgt.
No. per
Container
2. Type of Container
Fl Metal
| | Plastic
I | Glass
I I Paper
I I Other (Specify)
3. Location of Net Contents Information
I I Label I I Container
4. Size(s) Retail Container
6. Manner in Which Label is Affixed to Product I I Lithograph
| I Paper glued
• | I Stenciled
5. Location of Label Directions c
D C e c e ' c
On Label c
I | On Labeling accompanying'prodtict
Other l c r
c c c c c c
Section - IV
1. Contact Point (Complete items directly below for identification of individual to be contacted, if necessary, to process this application.)
Name
Daniel J. Jenkins
Title
U.S. Agency Regulatory
Affairs Manager
fefephone Wo. (Include Area Code)
(2/D'2)c383-2851
Certification
/ certify that the statements I have made on this form and all attachments thereto are true, accurate and complete.
I acknowledge that any knowingly false or misleading statement may be punishable by fine or imprisonment or
both under applicable law.
2. Signature
4. Typed Name
Annette M. Kirk
3. Title
Regulatory Affairs Manager
5. Date
December 3, 2012
6e Date "Application
Received
(Stamped)
EPA Form 8570-1 (Rev. 3-94) Previous editions are obsolete. White - EPA File Copy (original) Yellow - Applicant Copy

MONSANTO
imagine
'37
MONSANTO COMPANY
1300 I STREET, NW
SUITE 450 EAST
WASHINGTON, DISTRICT OF COLUMBIA 20005
http://www.monsanto.com
HAND DELIVERED
Decembers, 2012
Annette M. Kirk
Regulatory Affairs Manager
(314)694-8890
Document Processing Desk (NOTTF)
Office of Pesticide Programs
U.S. Environmental Protection Agency
One Potomac Yard
2777 South Crystal Drive, Room S4900
Arlington, VA 22202-4501
Attention: Mr. Kable B. Davis, Team Lead 25
Subject: Notification of new Master Labeling for
MON 58425 Herbicide (EPA Reg. No. 524-473)
i e c c c
et c c
CtCf
<"• c r. c r r
c c cc. r
f. c r c ( c
r- e
t r. r , ,
° r c r c
Dear Mr. Davis:
Monsanto is herein notifying new Master Labeling for MON 58425 Herbicide, EPA Reg. No. 524-473.
This new version supersedes the version previous approved on August 24, 2011.
The minor differences in this version of the Master Labeling include the following:
1) At the request of the New York Department of Environmental Conservation, we have
prohibition statement for two counties in the State of New York
2) The addition of two minor optional container label statements referencing the main label bookl
' . ' 7
This notification is consistent with the provisions of PR Notice 98-10 and EPA regulations at 40 CFR
152.46, and no other changes have been made to the labeling or the confidential statement of formula of
this product. I understand that it is a violation of 18 U.S.C. Soc. 1001 to willfully make any false
statement to EPA. I further understand that if this notification is not consistent with the terms of PR
Notice 98-10 and 40 CFR 152.46, this product may be in violation of FIFRA and I may be subject to
enforcement action and penalties under sections 12 and 14 of FIFRA.
In addition to a hardcopy of the Master Labeling for your file, also included on the enclosed CD are pdf
files of the following documents:
• Cover letter
• 8570-1 Application form
• Revised Master Labeling

f
If you have any questions regarding this submission or require any additional information, please contact
Dan Jenkins in our Washington D.C. office at (202) 383-2851 or by email at
daniel.j.ienkins@monsanto.com, or me directly at (314) 694-8890, or by e-mail at
annette.m.kirk@monsanto.com.
Sincerely,
Annette M. Kirk
Regulatory Affairs Manager
cc: Daniel J. Jenkins / Monsanto DC Office
c c c e c c
(. C C
t. c c
I I. < C I
(. I
c <
c c c c c
December 3, 2012, EPA Reg. No. 524-473 Monsanto Company Page 2 of 2

c 5,
MASTER LABEL FOR EPA REG. NO. 524-473
Registered Brand Names:
MON 58425 (primary)
Alternate Brands:
HARNESS® Herbicide
Confidence® Herbicide
4 20J3
Main Label for Crop Uses
C C C C C C
c c cc c e
C G G C C C
C C
c c
c c
c c c c c
c c c c
C- C (,
c c c
c c
C -C
Reg. No. 524-473 Notified: 04-Dec-2012 Page 1 of 33

r • ' r <*/^ ( 737
[insert Print Plate No.]
[Insert Brand Name]® Herbicide by Monsanto
[Insert Brand Name] is an emulsifiable herbicide for weed control in Field Corn, Production Seed
Corn, Silage Corn, Sweet Corn, Popcorn, Miscanthus and other non-food perennial bioenergy
crops.
Roundup Ready Plus™
Weed Management Solutions
ACTIVE INGREDIENT:
*Acetochlor 75.9%
OTHER INGREDIENTS 24.1%
100.0%
'Contains 839 grams/liter or 7.0 pounds/gallon of 2-chloro-N-ethoxymethyl-N-(2-ethyl-6-
• methylphenyl)acetamide.
U.S. Patent No. 5,225,570. Other patents pending. No license is granted under any non-U.S. patents.
GROUP T<15•i > ,., HERBICIDE
Complete Directions for Use
EPA Reg. No. 524-473
[insert date]
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State
c c c c c c
[container label optional statements]
Carefully follow detailed instructions in label booklet.
See label booklet for complete Directions for Use
c c c.c c c
c c c
C C C C C C
C C C C
ec
Use only according to label instructions.
Read the entire label before using this product
c c c
( C I
i. I. L
Read "LIMIT OF WARRANTY AND LIABILITY" before buying or using. If terms are not acceptable, return
at once unopened.
[container label option]
Read "LIMIT OF WARRANTY AND LIABILITY", which appears in the label booklet, before buying or
using. If terms are not acceptable, return at once unopened.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 2 of 33

si
THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT
FOR REFORMULATION. SEE INDIVIDUAL CONTAINER LABEL FOR REPACKAGING LIMITATIONS.
[Refutable Container Label Statement:]
THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT
FOR REFORMULATION. IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A
MONSANTO REPACKAGING OR TOLL REPACKAGING AGREEMENT.
[Non-refillable Container Label Statement:]
THIS IS AN END-USE PRODUCT. MONSANTO DOES NOT INTEND AND HAS NOT REGISTERED IT
FOR REFORMULATION OR REPACKAGING.
Alternate language for Confidence brand:
THIS IS AN END-USE PRODUCT. THE REGISTRANT DOES NOT INTEND AND HAS NOT
REGISTERED IT FOR REFORMULATION. SEE INDIVIDUAL CONTAINER LABEL FOR
REPACKAGING LIMITATIONS.
[Refutable Container Label Statement]
THIS IS AN END-USE PRODUCT. THE REGISTRANT DOES NOT INTEND AND HAS NOT
REGISTERED IT FOR REFORMULATION. IT IS INTENDED THAT REPACKAGING BE ONLY IN
ACCORDANCE WITH A MONSANTO REPACKAGING OR TOLL REPACKAGING AGREEMENT.
[Non-refillable Container Label Statement]
THIS IS AN END-USE PRODUCT. THE REGISTRANT DOES NOT INTEND AND HAS NOT
REGISTERED IT FOR REFORMULATION OR REPACKAGING.
CONTENTS
PRODUCT INFORMATION
1 1.0 INGREDIENTS
2 2.0 IMPORTANT PHONE NUMBERS
3 3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
3.2 Environmental Hazards
DIRECTIONS FOR USE
4 4.0 STORAGE AND DISPOSAL
5 5.0 PRODUCT INFORMATION
5.1 Use Restrictions
c c
c c
c c c c c c
c c c .
c c c
c c c c c c
6 6.0 WEED RESISTANCE MANAGEMENT
7 7.0 SOIL TEXTURE
8 8.0 MIXING, SPRAYING AND HANDLING INSTRUCTIONS
8.1 Equipment Cleaning & Repair
8.2 Sprayer Compatibility
Reg. No. 524-473 Notified: 04-Dec-2012 Page 3 of 33

37
8.3 Standard Sprayable Fluid Fertilizer Compatibility Test
9 9.0 APPLICATION SYSTEMS
9.1 Ground Broadcast Treatment
9.2 Ground Band Treatment
9.3 Application with Dry Bulk Fertilizer
9.3.1 Pneumatic (Compressed Air) Application (this product alone)
10 10.0 APPLICATION TIMING AND METHODS
10.1 Early Preplant Surface Application
10.2 Preplant Incorporation Application
10.3 Preemergence Surface Application
10.4 Postemergence Surface Application
10.5 Cultivation Information
11 11.0 WEEDS CONTROLLED
11.1 Annual Grasses
11.2 Annual Broadleaves
12 12.0 CONSERVATION OR MINIMUM TILLAGE SYSTEMS
12.1 At-Planting Applications
12.2 Control or Suppression of Emerged Weeds
12.2.1 Roundup Agricultural Herbicides
12.2.2 Gramoxone Brand Herbicides
12.2.3 2,4-D
12.3 Early Preplant Application
12.3.1 [Insert Brand Name] Herbicide
12.3.2 [Insert Brand Name] plus Atrazine
13 13.0 CONVENTIONAL TILLAGE
13.1 [Insert Brand Name] Herbicide/
13.2 [Insert Brand Name] plus Roundup Agricultural Herbicides on Corn Containing Roundup c
Ready 2 Technology including Roundup Ready Corn 2
13.3 [INSERT BRAND NAME] Tank-Mixtures for Preemergence Use in Corn
13.4 [INSERT BRAND NAME] Tank-Mixtures for Postemergence Use in Corp c < c c cC <-' f
C L (I
14 14.0 MISCANTHUS AND OTHER NON-FOOD PERENNIAL BIOENERGY CROPSC C (. f ( <
(. c
15 15.0 FALL APPLICATIONS
16 16.0 LIMIT OF WARRANTY AND LIABILITY
PRODUCT INFORMATION
1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Acetochlor 75.9%
OTHER INGREDIENTS '. : 24.1%
100.0%
*Contairis 839 grams/liter or 7.0 pounds/gallon of 2-chloro-N-ethoxymethyl-N-(2-ethyl-6-
methylphenyl)acetamide.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 4 of 33

r
U.S. Patent No. 5,225,570. Other patents pending. No license is granted under any non-U.S. patents.
EPA ESTABLISHMENT NUMBER:
NET CONTENTS:
2.0 IMPORTANT PHONE NUMBERS
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
CALL TOLL-FREE, •_• .
| 1-800-332-3111
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
ASSISTANCE, CALL COLLECT, DAY OR NIGHT, '
(314)-694-4000
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children.
WARNING! AVISO!Si listed no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
not understand the label, find someone to explain it to you in detail.)
CAUSES SUBSTANTIAL BUT TEMPORARY EYE AND SKIN IRRITATION.
HARMFUL IF SWALLOWED OR INHALED.
MAY CAUSE ALLERGIC SKIN REACTION. . .
Avoid contact with skin, eyes or clothing.
Avoid breathing vapor or spray mist.
Wash thoroughly with soap and water after handling.
c c c c c c
c c
c c
FIRST AID: Call a poison control center or doctor for treatment advice. tocccc " ""
IF IN EYES
IF ON SKIN OR
CLOTHING
IF
SWALLOWED
IF INHALED
• Hold eye open and rinse slowly and gently with water for 1 5-20<rninutos.
• Remove contact lenses, if present, after the first 5 minutes, theiic«5r'itjriue rinsing
eye. ; . <:ccc c cc< c c <|
C 0 0 0 C '1 C <
• Take off contaminated clothing. c c «
• Rinse skin immediately with plenty of water for 15-20 minutes. ° cooco.
• Sensitized persons should avoid further contact and reuse of contaminated c
clothing. £% '• L C C
• Call poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• Do not induce vomiting unless told to do so by the poison control center or
doctor.
• Do not give anything by mouth to an unconscious person.
• Move person to fresh air.
• If person is not breathing, call 91 1 or an ambulance, then give artificial
respiration, preferably by mouth-to-mouth, if possible.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 5 of 33

r r <°/C C /37
Have the product container or label with you when calling a poison control center or doctor, or going
for treatment.
You may also contact (314) 694-4000, collect day or night, for emergency medical treatment
information.
This product is identified as [Insert Brand Name] Herbicide, EPA Registration No. 524-473.
Personal Protective Equipment (PPE):
Some of the materials that are chemical-resistant to this product are listed below. If you want more
options, follow the instructions for Category A on an EPA chemical-resistance category selection chart.
Applicators and other handlers must wear: coveralls over short-sleeved shirt and short pants,
chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride,
chemical-resistant footwear plus socks, protective eyewear, chemical-resistant headgear for overhead
exposure and chemical-resistant apron when cleaning equipment, mixing, or loading.
Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this
product. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no
instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other
laundry.
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in
the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler
PPE requirements may be reduced or modified as specified in the WPS.
User Safety Recommendations:
Users should: • .
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product. Wash the outside of gloves before^ <; (
removing. As soon as possible, wash thoroughly and change into clean clothing. <>''' °i
3.2 Environmental Hazards
.
This product is toxic to fish. Do not apply directly to water, or to areas where surfacec.wrfercis present or
to intertidal areas below the mean high water mark. Do not contaminate water when disposing of
equipment washwaters. ic<cc ':<-cc '<. • ( C
c c i:
This chemical demonstrates the properties and characteristics associated with chemiealsctietected in c
ground water. The use of this chemical in areas where soils are permeable, particularly where thfc'ground
water is shallow, may result in ground water contamination. <.<.<. >. L C
I. <- I
Acetochlor has properties that may result in surface water contamination via dissolved runoff and runoff
erosion. Practices should be followed to minimize the potential for dissolved runoff and/or runoff erosion.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product
can only be used in accordance with the Directions for Use on this label or in separately published
Monsanto Supplemental Labeling.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 6 of 33

c. II,
'SI
[alternate for Confidence brand: This product can only be used in accordance with the Directions for Use
on this label or in separately published Supplemental Labeling.]
Do not apply this product in a way that will contact workers or other persons, either directly or through
drift. Only protected handlers may be in the area during application. For any requirements specific to your
State or Tribe, consult the agency responsible for pesticide regulations.
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State.
Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered
by the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted entry interval'(REI) of 12 hours.
Exception: if the product is soil-injected or soil-incorporated, the Worker Protection Standard, under
certain circumstances, allows workers to enter the treated area if there will be no contact with anything
that has been treated.
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
that involves contact with anything that has been treated, such as plants, soil, or water, are: coveralls
over short-sleeved shirt and short pants, chemical-resistant gloves made of any waterproof material,
chemical-resistant footwear plus socks, protective eyewear, and chemical-resistant headgear for
overhead exposure. c <cceecj
4.0 Storage and Disposal
Do not contaminate water, food, or feed by storage and disposal.
c ce o c c
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, arcd t L
veterinary supplies. Keep container closed to prevent spills and contamination. c c c c cc c
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container, including
application in accordance with label directions. If wastes cannot be avoided, offer remaining
product to a waste disposal facility or pesticide disposal program. Such programs are often run
by state or local governments or by industry. All disposal must be in accordance with applicable
federal, state and local regulations and procedures.
[Alternate PESTICIDE DISPOSAL statement for transport vehicles only. To avoid wastes, empty
as much product from this transport vehicle as possible for repackaging or use in accordance with
label directions. If wastes cannot be avoided, offer remaining product or rinsate to a waste
disposal facility or pesticide disposal program. All disposal must be in accordance with applicable
federal, state, and local regulations and procedures.]
CONTAINER HANDLING AND DISPOSAL: See container label for container handling and
disposal instructions and refilling limitations.
c. c c c
c c c
c-c i-
c c c c t c
c
cc c(- C C
Reg. No. 524-473 Notified: 04-Dec-2012 Page 7 of 33

c '31
[OPTIONAL CONTAINER AND DISPOSAL STATEMENTS AND REFILLING LIMITATIONS FOR
CONTAINER LABELS]
FOR NONREFILLABLE RIGID PLASTIC 2.5-GALLON CONTAINERS AND OTHER CONTAINERS OF
GREATER THAN 1-GALLON BUT EQUAL TO OR LESS THAN 5-GALLON CAPACITY: Nonrefillable
container. Do not reuse this container to hold materials other than pesticides or dilute pesticides
(rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other pesticide-
related materials in the container. Contact your state regulatory agency to determine allowable practices
in your state.
[Alternate container statement Nonrefillable container. Do not reuse or refill this container.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain
for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10
seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal.
Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. To find the nearest site, contact your chemical dealer or Monsanto at 1-
800-768-6387. If recycling is not available, dispose of in accordance with federal, state, and local
regulations and procedures, which may include puncturing the properly rinsed container and disposing in
a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state, and local regulations and procedures, which
may include .puncturing the properly rinsed container and disposing in a sanitary landfill.]
FOR NONREFILLABLE RIGID PLASTIC 30-GALLON CONTAINERS AND OTHER CONTAINERS OF
GREATER THAN 5-GALLON CAPACITY: Nonrefillable container. Do not reuse or refill this container.
[Alternate container statement Nonrefillable container. Do not reuse this container to hold materials
other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state
regulatory agency to determine allowable practices in your state.]
Triple rinse or pressure rinse (or equivalent) this container promptly after emptying.
Triple rinse as follows: Empty the'remaining contents into application equipment or a mix tank. Fill the
container 1/4 full with water. Replace and tighen closures. Tip container on its side and roll it back and
forth, ensuring at least one revolution, for 30 seconds. Stand the container on its end and tip it back and
forth several times. Turn the container over onto its other end and tip it back and forth several times.
Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain
for 10 seconds after the flow begins to drip. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and
continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over
application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
Reg. No. 524-473 Notified: 04-Dec-2012 Page 8 of 33

r '37
nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10
seconds after the flow begins to drip.
Once properly rinsed, some agricultural plastic pesticide containers can be taken to a container collection
site or picked up for recycling. To find the nearest site, contact your chemical dealer or Monsanto at 1-
800-768-6387. If recycling is not available, dispose of in accordance with federal, state, and local
regulations and procedures, which may include puncturing the properly rinsed container and disposing in
a sanitary landfill.
[Alternate container disposal statement: Then offer this container for recycling, if available. If recycling is
not available, dispose of in accordance with federal, state, and local regulations and procedures, which
may include puncturing the properly rinsed container and disposing in a sanitary landfill.]
FOR ALL REFILLABLE CONTAINERS, EXCEPT TRANSPORT CONTAINERS : Refillable container.
Refill this container with pesticide only. Do not reuse this container for any other purpose.
Cleaning this container before refilling is the responsibility of the refiller. Cleaning this container before
final disposal is the responsibility of the person disposing of the container.
To clean this container before final disposal, empty the remaining contents from this container into
application equipment or a tank mix. Fill the container about 10 percent full with water. Agitate vigorously
or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or
rinsate collection system. Repeat this rinsing procedure two more times. Then offer this container for
recycling, if available. To obtain information about recycling refillable containers, contact Monsanto
Company at 1-800-768-6837.
[Optional container label statement Return properly rinsed container to Monsanto for recycling. Contact
Monsanto at 1-800-768-6387.]
FOR ALL TRANSPORT CONTAINERS AS DEFINED IN 40 CFR 156.3: Emptied container retains vapor
and product residue. Observe all precautions stated on this label until the container is cleaned,
reconditioned, or destroyed. Prior to refilling, inspect carefully for damage such as cracks, punctures,
abrasions, and worn-out threads and closures. Clean thoroughly before reuse for transportation of a
material of different composition or before retiring this transport vehicle from service.
5.0 PRODUCT INFORMATION
This product is for control of yellow nutsedge and the annual grasses and broadleaf weeds listed in the
"WEEDS CONTROLLED" section of this label. This product alone will not control emerged seedlings.
This product may be applied either as a surface application before or after planting, or after crop
emergence. This product may also be shallowly incorporated prior to planting to blend the herbicide
treatment into the upper 1 to 2 inches of soil. Except for minimum or conservation tillage systems, the
seedbed should be fine, firm and free of clods and trash.
Read and carefully observe precautionary statements and all other information appearing on the labeling
of all products used in mixtures and sequential treatments. Use according to the most restrictive label
directions in the mixture. .
5.1 Use Restrictions
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State.
Reg. No: 524-473 Notified: 04-Dec-2012 Page 9 of 33

r to
This chemical demonstrates the properties and characteristics associated with chemicals detected in
ground water. The use of this chemical in areas where soils are permeable, particularly where the ground
water is shallow, may result in ground water contamination. On the following, soil types, do not apply this
product within 50 feet of any well where the depth to ground water is 30 feet or less: sands with less than
3 percent organic matter; loamy sands with less than 2 percent organic matter; or sandy loams with less
than 1 percent organic matter. See the figure for additional clarification.
Restriction does not apply for areas
'more than 50 leet from a well.
The acetochlor soil restriction is as follows:
On the following soil types, do not apply acetochlor within
50 feet of any well where the depth to ground water is
30 feet or less:
• sands with less than 3 percent organic matter;
• loamy sands with less than 2 percent organic matter; or
• sandy loams with less than 1 percent organic matter.
well > n 50 foot setback
Restriction does not
apply if ground water
is more than 30 (
below land surface
•«• water table
This product may not be mixed or loaded within SGMeet of any wells (including abandoned wells and
drainage wells), sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes
and reservoirs. This setback does not apply to properly capped or plugged abandoned wells and does
not apply to impervious pad or properly diked mixing/loading areas.
Operations that involve mixing, loading, rinsing, or washing of this product into or from pesticide handling
or application equipment or containers within 50 feet of any well are prohibited unless conducted on an
impervious pad constructed to withstand the weight of the heaviest load that may be positioned on or
moved across the pad. Such a pad shall be designed and maintained to contain any product spills or
equipment leaks, container or equipment rinse or washwater, and rainwater that may fall on pad. Surface
water shall not be allowed to either flow over or from the pad, which means the pad must be self-
contained. The pad shall be sloped to facilitate material removal. An unroofed pad shall be of sufficient
capacity to contain a minimum of 110 percent of the capacity of the largest pesticide container or
application equipment on the pad. A pad that is covered by a roof of sufficient size to completely exclude
Reg. No. 524-473 Notified: 04-Dec-2012 Page 10 of 33

'37
precipitation from contact with the pad shall have a minimum containment capacity of 100 percent of the
capacity of the largest pesticide container or application equipment on the pad. Containment capacities
as described above shall be maintained at all times. The above specified minimum containment
capacities do not apply to vehicles when delivering pesticide shipments to the mixing/loading site. States
may have in effect additional requirements regarding wellhead setbacks and operational containment.
Do not flood irrigate to apply or incorporate this product.
Product must be used in a manner which will prevent back siphoning into wells, spills or improper
disposal of excess pesticide, spray mixtures or rinsates.
Do not apply this product through any type of irrigation system, unless otherwise directed by approved
supplemental labeling in possession of the user at the time of application.
Disposal of excess pesticide, spray mixtures or rinsate should be according to label use instructions or
according to the State Pesticide or Environmental Control Agency or the Hazardous Waste representative
at the nearest EPA regional office.
Do not apply under conditions which favor runoff or wind erosion of soil containing this product to non-
target areas. To prevent off-site movement due to runoff or wind erosion:
Avoid treating powdery dry or light sandy soils when conditions are favorable for wind erosion.
Under these conditions, the soil surface should first be settled by rainfall or irrigation. •
Do not apply to impervious substrates such as paved or highly compacted surfaces or frozen
or snow covered soils.
Do not use tailwater from the first flood or furrow irrigation of treated fields to treat non-target crops
unless at least 1/2 inch of rainfall has occurred between application and the first irrigation.
Do not apply this product using aerial application equipment, unless otherwise directed by approved
- supplemental labeling in possession of the user at the time of application..
Do not apply when wind conditions favor drift to non-target sites. To minimize spray drift to non-target
areas:
Use low-pressure application equipment capable of producing a large droplet spray. Do not
use nozzles that produce a fine droplet spray. Minimize drift by using sufficient spray volume .
to ensure adequate coverage with large droplet size sprays.
Keep ground driven spray boom as low as possible above the target surface.
Make application when the wind velocity favors on-target product deposition (approximately 3 to 10
miles per hour). Do not apply when wind velocity exceeds 15 miles per hour. Avoid application when
gusts approach 15 miles per hour.
Low humidity and high temperatures increase the likelihood of spray drift to sensitive areas. Avoid
spraying during conditions of low humidity and/or high temperatures. Do not apply during inversion
conditions.
Use of this product not consistent with this label may result in injury to persons, animals or crops, or other.
unintended consequences. .
Flush sprayer with clean water after use.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 11 of 33

•He,
'37
ROTATIONAL CROPS:
1) If a crop treated with this product is lost, field corn, seed corn, silage corn, popcorn sweet corn, or milo
(sorghum) may be replanted immediately. When planting milo (sorghum), only use seed properly treated
with seed protectant or safener. Do not exceed a total of 3.0 pounds per acre of active ingredient if
additional product is applied.
2) Nongrass animal feeds such as alfalfa, clover, kudzu, lespedeza, lupin, lanfojn, trefoil, and Vetch spp.
may be planted 9 months after application. Wheat may be planted 4 months after application.
3) Rotate the next season to the following crops: soybeans, corn (all types), cotton, milo (sorghum),
tobacco, sugar beets,Sunflowers, potatoes, barley, buckwheat,, millet (pearl and proso), oats, rye,
teonsinte triticale, wild rice, dried shelled bean group Lupinus spp. (including grain lupin, sweet lupin and
white lupin); Phaseolius spp. (includes field bean, kidney bean, lima bean (dry), navy bean, pinto bean,
tepary bean, bean); Vigna spp. (includes adzuki bean, blackeyed pea, catjang, cowpea, Crowder pea,
moth bean, mung bean, rice bean, southern pea and urd bean); broad bean (dry) chickpea, guar, lablab
bean, lentil, pea (Pisumspp., includes field pea); pigeon pea.
ROTATION TO NON-FOOD WINTER COVER CROPS
Following harvest of food crops treated with [INSERT BRAND NAME], only non-food or non-feed winter
cover crops (with the exception of wheat) may be planted. Do not graze or harvest rotational cover crops
for food or animal feed for 18 months following the last application of [INSERT BRAND NAME]. This
prohibition does not apply to wheat, which may be planted 4 months following the last application of
[INSERT BRAND NAME], or to nongrass animal feeds, which may be planted 9 months after the last
application of [INSERT BRAND NAME].
6.0 WEED RESISTANCE MANAGEMENT
GROUP 15 HERBICIDE
Acetochlor, the active ingredient in this product, is a Group 15 herbicide based on the mode of action
classification system of the Weed Science Society of America. Any weed population can contain plants
naturally resistant to Group 15 herbicides.' Weed species resistant to Group 15 herbicides may be
effectively managed utilizing another herbicide from a different Group, or by using other cultural or
mechanical practices.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 12 of 33

c c 7*7
General principles of herbicide resistance management
1. Apply integrated weed management practices. Use multiple herbicide modes-of-action
with overlapping weed spectrums in rotation, sequences, or mixtures.
2. Use the full specified herbicide rate and proper application timing for the hardest to
control weed species present in the field.
3. Scout fields after herbicide application to ensure control has been achieved. Avoid
allowing weeds to reproduce by seed or to proliferate vegetatively.
4. Monitor site and clean equipment between sites.
For annual cropping situations also consider the following:
• Start with a clean field and control weeds early by using a burndown treatment or tillage
in combination with a preemergence residual herbicide as appropriate.
• Use cultural practices such as cultivation and crop rotation, where appropriate.
• Use good agronomic principles that enhance crop competitiveness
• Use new commercial seed that is as free of weed seed as possible.
Report any incidence of repeated non-performance of this product on a particular weed to your
Monsanto representative, local retailer, or county extension agent.
7.0 SOIL TEXTURE
Applicators should evaluate soil conditions carefully to assure that they choose the correct label rate. The
.specified use rates of this product and the other herbicides labeled for use in tank mixtures with this
product vary with soil texture. Unless soil texture is specifically named/rate tables throughout this label
refer to only three soil textural groups: coarse, medium and fine. The following is a complete listing of soil
textures included in each of these three soil textural groups:
SOIL TEXTURAL GROUP
COARSE
MEDIUM
FINE
SOIL TEXTURE
sand, loamy sand, sandy loam
loam, silt loam, silt, sandy clay loam
silty clay loam, clay loam, sandy clay, silty clay, clay
Refer to the above table to determine the corresponding soil textural group for the soil to be treated.
8.0 MIXING, SPRAYING AND HANDLING INSTRUCTIONS
NOTE: Direct contact or exposure to this product or spray mixtures of this product should be minimized.
The following instructions for transfer, mixing, cleaning or repairing equipment should be followed in order
to minimize this exposure. Review the protective clothing requirements as listed in the
"PRECAUTIONARY STATEMENTS" section of this label and do not use this product until you have the
necessary protective clothing.
2.5 Gallon Containers
Reg. No. 524-473 Notified: 04-Dec-2012 Page 13 of 33

r ls
Open pouring from these containers can result in exposure from splashing or spilling. Special care in
lifting and pouring is strongly recommended.
Bulk Containers
Open pouring from these containers can result in exposure from splashing or spilling and is not
recommended. This product should be transferred from these containers to the mix or spray tank using
pumps or transfer probes. The probe or pump should not be removed from the container or disconnected
until the container is emptied or rinsed. Use the pump or probe system to rinse the empty container and
transfer the rinsate directly to the mix or spray tank.
8.1 Equipment Cleaning and Repair
Cleaning and repair of transfer systems and application equipment is a source of exposure to this
product. Care should be taken to minimize exposure during cleaning and repair to transfer systems
application equipment. Whenever possible, these systems or equipment should be rinsed before being
cleaned or repaired.
When repairs must be made during transfer or application, the equipment should be shut down, and
special care taken to avoid contact with the pesticide.
8.2 Sprayer Compatibility
Always predetermine the compatibility of this product or labeled mixtures of this product with water carrier
or sprayable fluid fertilizer carrier by mixing small proportional quantities in advance. See the
"STANDARD SPRAYABLE FLUID FERTILIZER COMPATIBILITY TEST" section in this label to
determine the compatibility of this product and the labeled tank mixtures specified for use with sprayable
fluid fertilizer carrier.
Mix this product or labeled tank mixture of this product with the appropriate carrier as follows:
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
2. Through the screen, fill the sprayer tank one-half full with appropriate carrier.
3. If a compatibility agent is necessary to improve mixing or to prevent the formation of undesirable and
unsprayable gels or precipitates, while agitating add it to the carrier already in the tank. Use only
compatibility agents cleared by FDA for this use. Read and follow all directions for use, cautionary
statements and all other information appearing on the selected compatibility agent label. Check for
adequate agitation.
4. If a wettable powder or dry flowable formulation is used, make slurry with water, and add it slowly
through the screen into the tank. Continue agitation.
5. If a flowable formation is used, add slowly through screen into the tank. Mixing and compatibility may
be improved when flowable is premixed one part flowable with one part water and added slowly to
the tank in diluted form.
6. Add this product slowly through the screen into the tank. Mixing and compatibility may be improved
when this product is prediluted with two parts of water and added to the tank in diluted form.
7. Complete filling the sprayer tank with carrier. If a Roundup® agricultural herbicide or a Gramoxone
brand herbicide is used, add the required amount near the end of the filling process. Remove hose
from tank immediately after filling to avoid siphoning back into the water source.
Maintain good agitation at all times until the contents of the tank are sprayed.
NOTE: If spray mixture is allowed to settle at any time, thorough agitation is required to resuspend the
mixture before spraying is resumed.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 14 of 33

r
Keep bypass line on or near bottom of tank to minimize foaming. Screen size in nozzle or line strainers
should be no finer than 50-mesh. Carefully select proper nozzle to avoid spraying a fine mist. Check for
even distribution of spray droplets. For best results with ground application, use flat-fan or whirl-chamber
nozzle. To reduce loss of chemical due to drift of a fine mist, apply at pressures less than 40 psi.
8.3 Standard Sprayable Fluid Fertilizer Compatibility Test
Herbicides may not always mix evenly throughout a sprayable fluid fertilizer or the components may
separate too quickly to make their combined use of practical value. This may be due to certain
characteristics of the different fluid fertilizers. A simple test using small quantities of the components is
suggested to provide compatibility potential. The test follows:
A. Materials Required For A Compatibility Test
1. Two one-quart jars with lid or stopper (marked "with" and "without").
2. TEAspoons (for a more exacting test, a five to ten mNliliter (ml) pipette or graduated cylinder is
desirable).
3. Sprayable fluid fertilizer to be tested.
4. The herbicide chemicals to be mixed.
5. A compatibility agent (the purpose of the adjuvant is to help keep the fertilizer and crop protection
chemical in suspension, if this assistance is needed).
B. Procedure
1. Add one pint of the sprayable fluid fertilizer that will be used or other herbicide carrier to each jar
marked "with" and "without".
Add One Pint Liquid Fertilizer
To Two Quart Jars!
WITH . WITHOUT
2. To the jar marked "with", add 1/4 TEAspoon or 1.2 milliliters of a suitable compatibility agent; shake
gently for five to ten seconds to mix. (1/4 TEAspoon in one pint is the equivalent of two pints per
100 gallons of liquid fertilizer.)
To Jar Marked 'With"
Add Compatibility Agent
And Shake to Mix
WITH WITHOUT
3. To each jar add the appropriate amount of herbicide(s). If more than one is used, add them
separately with the wettable powders or dry flowables added first, flowables second and liquid last.
Shake gently five to ten seconds after each addition.
Add Herbicide(s) To Both Jars
And Shake to Mix
WITH WITHOUT
Reg. No. 524-473 Notified: 04-Dec-2012 Page 15 of 33

9-0
HERBICIDE
Wettable
Powders
or
Dry Flowables
RATE/ACRE
1 pound
2 pounds
3 pounds
4 pounds
5 pounds
1 =
=
= '
-
•=
Amount to be
Added per Pint of
Sprayable Fluid Fertilizer
(Assuming Volume is 25 gallons/Acre)
Level
TEAspoons
1.5
3.0
4.5
6.0
7.5
HERBICIDE
Emulsifiable
Concentrates or
Flowables or
Liquids or
Solutions
-
RATE/ACRE
1 pint
1 quart
2 quarts
3 quarts
1 gallon
5 quarts
=
=
—
—
—
=
Level
TEAspoons
0.5
1.0
2.0
3.0
4.0
5.0
or
or
or
or
or
or
MILLILITERS
2.4
4.7
9.5
14.2
19.0
23.8
This compatibility test is designed for 25 gallons of spray per acre with the maximum labeled rate of
herbicide. For changes in spray volume" or herbicide rate, make appropriate changes in the ingredients of
the test. Regardless of spray volume, the amount of compatibility agent should be equal to two or three
pints (two pints = 1/4 TEAspoon or 1.2 milliliters, three pints = 3/8 TEAspoon or 1.8 milliliters per pint of
sprayable fluid fertilizer) per 100 gallons of liquid fertilizer.
C. Observations and Decisions
1. If the herbicide(s) and the sprayable fluid fertilizer are compatible.
2. If a compatibility agent is necessary.
Five minutes after the final addition and mixing, observe both jars for the formation of large flakes, sludge,
gels or other precipitates. Observe if the herbicide(s) cannot be physically mixed with the liquid fertilizer
but remains as small oily particles in the solution.
If incompatibility in any form described above occurs in the jar "with" the compatibility agent added, the
liquid fertilizer and the herbicide(s) should not be used together in the same spray tank.
If incompatibility as described above occurs in the jar "without" the adjuvant but not in the jar "with"
adjuvant, the use of a compatibility adjuvant is recommended.
Both jars should be allowed to stand and be observed periodically for one-half hour. If the separate layers
of liquid fertilizer and additives can be resuspended by shaking, commercial application is possible. An
emulsifiable concentrate normally will go to the top after standing; wettable powders will either settle to
the bottom of the tank or jar, or float to the top, depending upon the density of the fertilizers.
If the herbicide(s) is compatible with fluid fertilizer in the foregoing test without having to use a
compatibility agent, fluid fertilizer may be used for the premixing. If it is not compatible without the
compatibility agent, the herbicide(s) should be premixed with water before adding to the spray tank.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 16 of 33

'37
9.0 APPLICATION SYSTEMS
9.1 Ground Broadcast Treatment
Apply this product and the labeled tank mixtures in 10 or more gallons of solution per acre using
broadcast boom equipment. The carrier may be either water or sprayable fluid fertilizer as specified for
the crop to be treated in the "DIRECTIONS FOR USE" section of this label. Do not apply during periods of
gusty winds, when winds are in excess of 15 miles per hour or when other conditions favoring drift exist.
9.2 Ground Band Treatment
Apply a broadcast equivalent rate and volume per acre. To determine these:
Band width
in inches
Row width
in inches
X
Broadcast RATE
per acre
Band RATE
per acre
Band width
in inches
Row width
in inches
X
Broadcast VOLUME
per acre' =
IBANHgATE
per acre
9.3 Application With Dry Bulk Fertilizer
The herbicide-fertilizer impregnation process must be completed only by commercial fertilizer or chemical
dealerships properly equipped for this procedure. Dry bulk fertilizer may be impregnated with this product
or the tank mixtures of this product plus atrazine on corn. This product and these tank mixtures must be
applied with 200 to 450 pounds of dry bulk fertilizer per acre and shallowly incorporated within 14 days
prior to planting. On medium- and fine-textured soils in areas where soil incorporation is not planned, i.e.,
reduced tillage situations or in some conventional tillage situations, applications can be made up to 30
days before planting to allow moisture to move the herbicide-fertilizer mixture into the soil. On coarse-
textured soils, applications can be made up to 14 days prior to planting. The herbicide must be applied
as specified in this label for the crop, weed and soil type treated. Refer to the table for broadcast rate per
acre to determine the application rate per acre for the herbicide treatment to be applied.
The following table provides a reference to determine the amount of LIQUID herbicide to be mixed per ton
of dry bulk fertilizer for a range of herbicide recommendations for fertilizer rates per acre:
Quarts of Liquid Herbicide/Acre
Fertilizer Rate
(Pounds/ Acre)
200
250
300
350
400
450
Acres Covered
(per ton)
10.0
8.0
6.7
5.7
5.0
4.5
(Pints of Herbicide/Ton Dry Bulk Fertilizer)
2.0 2.25 2.75
(pints) (pints) (pints)
20.0
16.0
13.4
11.4 •
10.0
9.0
22.5
18.0
15.0
12.8
11-.3
10.1
27.5
22.0
18.4
15.7
13.8
12.4
Reg. No. 524-473 Notified: 04-Dec-20'12 Page 17 of 33

To determine the amount of herbicide needed for rates not included in the preceding table, use the
following formula:
Herbicide Rate
Pints/Acre X 2000
Pounds Fertilizer/Acre
= Pints of Herbicide
per Ton of Dry Bulk Fertilizer
Mix and blend the dry fertilizer and herbicide mixture in a closed rotary drum-type mixture allowing
sufficient time to ensure uniform coverage. Use at least one ton of dry fertilizer per mixing.operation.
Inject the herbicide into the drum over a minimum of a 2-minute period and allow at least 2 additional
minutes mixing time to ensure uniformity. The nozzle used to spray the herbicide treatment must be
placed inside the mixer to provide uniform spray coverage of the tumbling fertilizer.
If the dry fertilizer used has inadequate absorptive capacity, use a higher absorptive material such as
Agsorb or Micro-Cel, to provide a free-flowing mixture.
The following table provides a partial list of dry fertilizers which may be impregnated with this product or
tank mixtures of this product with other herbicides.
FERTILIZER
Ammonium sulfate
(21-0-0)
Ammonium phosphate-sulfate
(16-20-0)
Diammonium phosphate
(18-46-0)
Potassium chloride
(0-0-60)
Potassium sulfate
(0-0-52)
Single super-phosphate
(0-20-0)
Treble super-phosphate
(0-46-0)
*Urea
(46-0-0)
[INSERT
BRAND
NAME]
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
[INSERT BRAND
NAME] + ATRAZINE
Yes
Yes
Yes
Yes
Yes
No
No
Yes
*Some ureas may be phytotoxic when applied on corn. Use only ureas known to be safe to corn.
NOTE: DO NOT impregnate this product or tank mixtures of this product with other herbicides on
fertilizers containing ammonium nitrate, potassium nitrate or sodium nitrate.
Spread the herbicide-dry fertilizer mixture uniformly with a properly calibrated applicator: dribble,
pneumatic (air flow) or spin. When using spin applicators, fertilizers impregnated with this product or tank
mixtures of this product with other herbicides must be spread at half-rate and overlapped 100 percent to
obtain full rate and uniform distribution. Non-uniform spreading of the fertilizer-herbicide mixture may
result in unsatisfactory weed control or crop injury.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 18 of 33

/37
9.3.1 Pneumatic (Compressed Air) Application (this product alone)
High humidity, high urea concentrations, low fertilizer use rates, and dusty fertilizer may cause herbicide-
fertilizer mixture to build up or plug the distributor head, air tubes, or deflector plates. To minimize
buildup, premix this product with Exxon Aromatic 200 at a rate of 1 to 4 pints per gallon of this product.
Aromatic 200. may be used in either fertilizer blender or through direct injection systems. Drying agents
should not be used when using Aromatic 200.
NOTES: Mixtures of this product and Aromatic 200 must be used on dry fertilizer only. Poor results or
crop injury may result if these mixtures are used in water or liquid fertilizer solutions for spraying
applications. When impregnating this product in a blender before application, a drier mixture can be
attained by substituting a drying agent for Aromatic 200. The use of Agsorb or a drying agent of 6/30
particle size are recommended. >
10.0 APPLICATION TIMING AND METHODS
10.1 Early Preplan! Surface Application
This product and some labeled tank mixtures of this product may be applied in no-till and other
conservation tillage systems before weeds emerge and up to 45 days before planting field corn or silage
corn. Split applications can be made 30 to 45 days prior to planting with 60 percent of the specified
broadcast rate applied initially and the remaining 40 percent applied at planting. Applications made less
than 30 days prior to planting can be made either as a split or as a single application. If weeds are
present at the time of application, apply this product in a tank mixture with an appropriate contact
herbicide. Observe directions for use, precautions and restrictions on the label of the contact herbicide.
During the planting operation, be careful not to move untreated soil to the surface or move treated soil out
of the row, as weed control may be reduced.
10.2 Preplant Incorporation Application
This product and many of the labeled tank mixtures may be mixed into the soil using shallow
incorporation equipment any time within 14 days prior to planting. Apply the specified treatment rate to
the soil surface as a broadcast application. Either existing soil moisture or subsequent precipitation or
irrigation is required to bring incorporated herbicide treatments into contact with germinating weed
seedlings. If weeds emerge after treatment, rotary hoe or shallowly cultivate immediately to improve
performance.
Shallowly incorporate the treatment into the upper 1 to 2 inches of the soil. Equipment should be operated
at manufacturer's designed speed for incorporation to ensure adequate mixing and distribution of the
herbicide treatment in the soil. Equipment design including any drag attachments must be adequate to
avoid soil ridging which may result in streaked or reduced weed control. Equipment should be set to work
the soil NO DEEPER THAN 4 INCHES. Soil conditions, including moisture content and crop residue
levels, must be suitable to allow thorough and uniform mixing.
10.3 Preemergence Surface Application
This product and all labeled tank mixtures may be applied to the soil surface after planting and prior to
either crop or weed emergence. Apply within 5 days of last preplant tillage. If weeds emerge after
treatment, or if treatment is applied more than 5 days after last preplant tillage, rotary hoe or shallowly
cultivate immediately to improve performance. Precipitation or overhead sprinkler irrigation is required
after application to move the herbicide treatment into the weed germination zone. The amount of
precipitation or overhead sprinkler irrigation required depends on existing soil mixture, soil type and
percent organic matter content, but 1/4 to 3/4 inch is normally adequate. Performance is improved when
Reg. No. 524-473 Notified: 04-Dec-2012 ' Page 19 of 33

r c
moisture is received within 7 days after application and prior to weed emergence. High intensity or
excessive rainfall or excessive irrigation after application may reduce control.
10.4 Postemergence Surface Application
This product and certain tank mixtures may be applied postemergence until corn reaches 11 inches in
height. Application must be made prior to weed seedling emergence or in a tank-mixture that controls
emerged weeds. Read and follow all restrictions and directions on tank-mix product labels. Refer to the
specific treatment intended in the "DIRECTIONS FOR USE" section of the label to determine if
postemergence applications to corn are recommended and determine the proper weed and corn growth
stage limitations. Precipitation or overhead sprinkler irrigation is required after application to move the
herbicide treatment into the weed germination zone to control unemerged weeds. The amount of
precipitation or irrigation required depends on existing soil moisture, soil type and percent organic matter
content, but 1/4 to 3/4 inch is normally adequate. If weeds emerge after treatment, rotary hoe or
shallowly cultivate to improve performance.
DO NOT apply postemergence to sweet corn.
DO NOT make postemergence surface applications using sprayable fluid fertilizer as the carrier because
severe crop injury may occur.
10.5 Cultivation Information
Delay cultivation after application for as long as possible unless weeds or grasses emerge. Shallowly
cultivate or rotary hoe immediately if weeds or grasses emerge. If cultivation is necessary because of soil
crusting or compaction, set equipment shallow and minimize lateral soil movement to avoid dilution or
displacement of the herbicide treatment. If a band application is used and weeds have emerged in the
treated band, set cultivator to throw soil into the row covering the band
11.0 WEEDS CONTROLLED
When applied as directed under conditions described, this product alone will CONTROL the following
weeds:
11.1 Annual Grasses
When applied as directed under conditions described, this product and tank mixtures of this product will
control or reduce competition from the weeds listed.
NOTE: C = Control R = Reduced Competition
Barnyardgrass •
Echinocloa crus-galli
Crabgrass
Digitaria ischaemum
Digitaria sanguinalis
Crowfootgrass
Dactyloctenium aegyptium
[INSERT
BRAND
NAME]
C
C
C
[INSERT BRAND NAME]
plus
ATRAZINE
C
C
C
BANVEL
OR
CLARITY
C
C
C
PRINCEP
C
C
C
PURSUIT
C .
C
C
Reg. No. 524-473 Notified:04-Dec-2012 Page 20 of 33

Cupgrass, prairie
Eriochloa contracta
Cupgrass, woolly1
Eriochloa villosa
Foxtail, giant
Setaria faberi
Foxtail: green, robust
purple, robust white
Setaria viridis
Foxtail, yellow
Setaria lutescens
Goosegrass
Eleusine indica
Johnsongrass, seedling
Sorghum halepense
Millet, foxtail
Setaria italica
Millet, proso*1
Panicum miliaceum
Oats, wild
Avena fatua
Panicum, brpwntop
Panicum fasciculatum
Pancium, fall
Panicum dichotomiflorum
Panicum, Texas
Panicum texanum
Rice, red
Oryza saliva
Sandbur; Grassbur
Cenchrus incertus
Shattercane; Wild cane^
Sorghum bicolor
Signalgrass, broadleaf
Brachiaria platyphylla
Sprangletop, red
Leptochloa filiformis
Wheat, volunteer
Triticum aestivum
Witchgrass
Panicum capillare
C
C
C
C
C
C
R
R
R
R
C
R
C
R
R
C
C
R
C
C
C
C
C
C
C
R
R
R
C
C
R
C
R
R /
C
C
C
C
C
C
C
C
C
C
R
R
R
R
C
R
•
•
•
C
C
R
C
C
C
C
C
C
C
R
R
R
C
C
R
C
R
R
C
C
C
C
C
C
C
C
C
C
C
R
R
R
C
R
C
R
R
C
C
R
C
Use 3 to 3.4 pints per acre of this product applied alone or in tank-mix combinations for best results.
Control can be erratic especially under dry weather conditions. Control escaped weeds with
cultivation or application of an appropriate EPA-registered postemergence herbicide. Contact the
local Monsanto [retailer] representative for details regarding a complete woolly cupgrass
management program.
Use 3 to 3.4 pints per acre of this product to reduce competition from this weed.
11.2 Annual Broadleaves
NOTE: C = Control R = Reduced Competition
Reg. No. 524-473 Notified: 04-Dec-2012 Page 21 of 33

r. '3T
Beggarweed, Florida
Desmodium tortuosum
Carpetweed
Mollugo verticillata
Cocklebur1
Xanthium strumarium
Galinsoga
Galinsoga spp.
Groundcherry, annual
Physalis spp.
Groundcherry, cutleaf
Physalis angulata
Henbit
Lamium amplexicaule
Jimsonweed "
Datura stramonium
Kochia^
Kochia scoparia
Lambsquarters"
Chenopodium album
Morningglory:1
Tall Ipomoea purpurea
Pitted Ipomoea lacunosa
Ivyleaf Ipomoea hederacea
Entireleaf Ipomoea hederacea
var. intergriuscula
Smallflower
Jacquemontia tamnifolia
Mustard
Brassica spp.
Nightshade,
black Solanum nigrum
hairy Solanum sarrachoides
Pigweed; Carelessweed*
Amaranthus spp.
Purslane
Portulaca oleracea
Pusley, Florida
Richardia scabra
Ragweed, common1*
Ambrosia artemisiifolia
Ragweed, giant1
Ambrosia trifida
Sicklepod
Cassia obtusifolia
Sida, prickly; Teaweed
Sida spinosa
Smartweed
[INSERT
BAND
NAME]
R
C
•
C
•
R
C
R
R
C
•
•
C
C
C
.C
C
•
•
R
R
. [INSERT BRAND NAME]
plus
ATRAZINE
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
BANVEL OR
CLARITY
•
C
C
C
•
C
C
•
•
C
R
C
C
C
C
C
C
C
•
•
C
PRINCEP
•
C
R
C
•
C
C
R
C
C
C
C
C
C
C
C
C
C
R
C
C
PURSUIT
R
C
R
C
•
R
C
C
C
C
R
C
C
C
C
C
C
R
•
C
C
Reg. No. 524-473 Notified: 04-Dec-2012 Page 22 of 33

c '3*7
Polygonum pensylvanicum
Polygonum persicaria
Starbur, bristly
Acanthospermum hispidum
Sunflower, common1'"
Helianthus annuus
Velvetleaf; Buttonweed'*'"
Abutilon theophrasti
Waterhemp
Amaranthus tuberculatus
SEDGE
Nutsedge, yellow9
Cyperus esculentus
R
•
R
C
C
C
C
C
C
C
•
R
C
C
•
R
R
R
C
C
•
C
C
c
c
1 Use a minimum of 1.5 quarts atrazine 4L per acre in tank mixture combinations to control this weed.
Control can be erratic especially under dry weather conditions. Control escaped weeds with
cultivation or application of an appropriate EPA-registered postemergence herbicide.
^ If triazine-resistant biotypes are suspected, tank mixtures with triazine herbicides may.require a post
sequential application of a non-triazine herbicide for control.
3 Use the higher rate in the application raterange for [Insert Brand Name] herbicide alone and in tank
mixtures with triazine herbicides if triazine-resistant biotypes are suspected.
4 Use a minimum of 1.5 quarts atrazine per acre in tank-mixture combinations to control this weed. In
areas restricted to 1 pound atrazine per acre (1 quart atrazine 4L) or where less atrazine per acre is
desired, on medium- and fine-textured soils, use 2.75 pints of [Insert Brand Name] herbicide in a tank
mixture with 1 quart atrazine 4L per acre for control of this weed. Control can be erratic especially
under dry weather conditions. Control escaped weeds with cultivation or application of an appropriate
EPA-registered postemergence herbicide.
^ Use 2.5 to 3.4 pints per acre of this product applied alone or in tank mixtures and apply preplant
incorporated only for control on medium and fine-textured soils.
° When using a tank mixture of [Insert Brand Name] herbicide plus Pursuit, these weeds are more
consistently controlled by preplant incorporated treatments.
12.0 CONSERVATION OR MINIMUM TILLAGE SYSTEMS
NOTE:x Each section of this label provides treatment rates for this product and tank mixtures including this
product. Applications, which are not consistent with recommendations in this label, may result in
unsatisfactory weed control, injury to crops, persons or animals, or other unintended consequences.
Refer to specific product labels for crop rotation restrictions and cautionary statements of all products
used in these tank mixtures, including precautions on soil pH sensitive varieties, minimum re-cropping
interval and rotational guidelines.
Use the higher rates in the application rateranges in areas of heavy weed infestation or where otherwise
specified. If emerged weeds exist at planting, the application of a contact herbicide or tillage is
recommended when possible to eliminate existing weeds. Do not apply when conditions favor drift.
Detailed information regarding "APPLICATION SYSTEMS" and "APPLICATION TIMING AND
METHODS" should be carefully reviewed in conjunction with the information in this section. If the specific
information in this section differs from the "PRODUCT INFORMATION", the specific information should
control.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 23 of 33

The tank-mix recommendations in the "CONVENTIONAL TILLAGE" section of this label may also be
followed when using "CONSERVATION OR MINIMUM TILLAGE SYSTEMS". Follow all label
precautions; directions and restrictions of tank-mix partners.
12.1 At-Planting Applications
When applied as directed under the conditions described, the specified tank mixtures control many
emerged annual weeds, suppress many emerged perennial weeds and give preemergence control of
many annual grasses and weeds when corn will be planted directly into a cover crop, established sod or
in previous crop residues. These tank mixtures will not control regrowth from perennial weeds.
Refer to specific product labels for crop rotation restrictions and cautionary statements of all products
used in these tank mixtures. For mixing instructions, see the "MIXING SPRAYING, AND HANDLING
INSTRUCTIONS" section of this label.
This product and tank mixtures with atrazine, Princep, Pursuit or atrazine plus Princep can be tank mixed
with Roundup agricultural herbicides, Gramoxone brand herbicides and/or 2,4-D.
Apply these tank mixtures with a Roundup agricultural herbicide or 2,4-D (amine or low volatile ester) in
10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre, or these tank mixtures with a
Gramoxone brand herbicide in 20 to 60 gallons of water or clear liquid fertilizer per acre immediately
before, during or after planting, but BEFORE .CROP EMERGENCE. As density of stubble, crop residue
or weeds increase, spray gallonage and rate should be increased within the application rate ranges to
ensure complete coverage. In the absence of emerged vegetation, delete the Roundup agricultural
herbicide, Gramoxone brand herbicide or 2,4-D portion of these tank mixtures.
Approved Application Systems
Ground: Broadcast boom
12.2 Control Or Suppression Of Emerged Weeds
ATTENTION: AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THESE TANK
MIXTURES TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS. Do not allow spray mist to
drift since even minute quantities of spray can cause severe damage or destruction to nearby crops,
plants or other areas on which treatment is not intended. Do not apply when winds are gusty or in excess
of 5 miles per hour or when other conditions, including lesser wind velocities, will allow drift to occur.
When spraying, avoid combinations of pressure and nozzle type that will result in fine particles (mist)
which are more likely to drift.
12.2.1 Roundup Agricultural Herbicides
Annual Weeds
Apply Roundup agricultural herbicides, in these tank mixtures at the proper rate for the weed per the
label instructions.
Perennial Weeds
At normal application rates in minimum tillage systems, perennial weeds may not be at the proper
stage of growth for control. Use of full labeled rates of Roundup agricultural herbicides, in the
mixtures above and under these conditions will provide top kill and reduce competition from
emerged perennial grasses and broadleaf weeds.
DO NOT USE THIS MIXTURE FOR BERMUDAGRASS OR JOHNSONGRASS CONTROL.
Reg. No. 524-473 Notified: 04-Dec-2012 ' Page 24 of 33

Ammonium Sulfate
The addition of ammonium sulfate in the spray solution may increase the performance of Roundup
agricultural herbicide tank mixtures on emerged annual weeds under adverse growing conditions.
When using ammonium sulfate, add 2 percent dry ammonium sulfate by weight or 17 pounds per
100 gallons of water. Ammonium sulfate should be added to the water in the spray tank and
completely dissolved prior to adding the herbicide or surfactant. Do not mix ammonium sulfate in
fluid fertilizer solutions. The equivalent rate of ammonium sulfate in a liquid formulation may also be
used.
If ammonium sulfate is added directly to the spray tank, add slowly with agitation. Adding too quickly
may clog outlet lines. Nozzle tip plugging may result from the use of low quality ammonium sulfate.
To determine quality, perform a jar test by adding 1/3 cup of ammonium sulfate to 1 gallon of water
and agitate for one minute. If undissolved sediment is observed, pre-dissolve the ammonium sulfate
in water and filter prior to adding to the spray tank.
Surfactants
Nonionic surfactants that are labeled for use with herbicides may be used with some Roundup
agricultural herbicides. Check specific label for restrictions. Do not reduce rates of Roundup
agricultural herbicides when adding surfactant. Use 0.5 percent surfactant concentration (2 quarts
per 100 gallons of spray solution) when using surfactants that contain at least 50 percent active
ingredient or a 1 percent surfactant concentration (4 quarts per 100 gallons of spray solution) for
those surfactants containing less than 50 percent active ingredient. Read and carefully observe
surfactant cautionary statements and other information appearing on the surfactant label.
12.2.2 Gramoxone Brand Herbicides
When used as directed, Gramoxone brand herbicides in a labeled tank mixture controls many
emerged annual weeds and suppresses many emerged perennial weeds.
Broadcast Treatment
Apply Gramoxone brand herbicides in the specified tank mixtures immediately before, during or after
planting but BEFORE CROP EMERGENCE. Use the application rates and timing of application
listed in the specific product label. As density of stubble, crop residue or weeds increases, spray
gallonage should be increased within the application rate range for complete coverage. Add a
nonionic spreader surfactant (approved for use on crops) containing at least 75 percent surfactant
active agent at 8 ounces per 100 gallons of diluted spray. REFER TO THE SPECIFIC
GRAMOXONE BRAND HERBICIDE LABEL FOR ADDITIONAL PRECAUTIONARY STATEMENTS.
12.2.3 2,4-D
When used as directed, 2,4-D in labeled tank mixtures controls many emerged annual and perennial
broadleaf weeds. For emerged weeds controlled, see the "WEEDS CONTROLLED" section of the
label for 2,4-D.
Broadcast Treatment
Apply 1 to 2 pints of 2,4-D (amine or low volatile ester) in the specified tank mixtures. Applications
should be made 7 to 14 days before planting or 3 to 5 days after planting but BEFORE CORN
EMERGES. As density of stubble, crop residue or weeds increase, spray gallonage should be
increased within the application rate range for complete coverage.
Reg. No. 524-473 Notified: 04-Dec-2012 • Page 25 of 33

— ,<-- <--
C (. 37
DO NOT use 2,4-D on light, sandy soils, or where soil moisture is inadequate for normal weed
growth. Observe all precautions and limitations on the 2,4-D label booklet.
12.3 Early Preplant Application
If emerged weeds are present at the time of treatment, a Roundup agricultural herbicide, Gramoxone
brand herbicide or 2,4-D should be added to this product according to the directions for use on their
respective product labels. If unsatisfactory weed control occurs (due to excessively dry or excessively wet
conditions) following the earlier application, a postemergence application of an appropriate labeled grass
and/or broadleaf weed herbicide may be used. If a postemergence treatment includes the herbicide used
early preplant, do not exceed the labeled rate for corn on a given soil texture. Observe all precautions and
limitations on the labels for [Insert Brand Name] herbicide, Roundup agricultural herbicides, Gramoxone
brand herbicide, 2,4-D and other postemergence herbicides before use of these products.
DO NOT apply tank mixtures containing a Roundup agricultural herbicide, Gramoxone brand herbicide or
other contact herbicides by air.
12.3.1 [Insert Brand Name] Herbicide
This product, when applied in a single application or split application will provide preemergence control or
reduced competition of the annual grasses and broadleaf weeds listed in the "WEEDS CONTROLLED"
section of this label. If weeds are emerged at time of application, apply a labeled contact herbicide with
this product. Observe the directions for use, precautions and restrictions on the label of the contact
herbicide.
Approved Application Systems
Ground: Broadcast boom
Dry Bulk Fertilizer Impregnation
Approved Application Methods
Single application
Application of this product should be made less than 30 days before planting but prior to weed
emergence.
NOTE: Application on coarse soils should not be made more than two weeks prior to planting.
Split Application
Apply 60 percent of the application rate as a split application prior to weed emergence and no more than
45 days prior to planting and the remaining 40 percent at or immediately following planting but before
crop emergence.
See the following table for specified broadcast rates per acre for single and split applications.
Application Rates
SOILTEXTURAL
GROUP
Coarse
Medium
Fine
Broadcast Rate Per Acre
[INSERT BRAND NAME]
(pints)
1 .50 to 2.00
2.25 to 2.75
2.75 to 3.00
Reg. No. 524-473 . Notified: 04-Dec-2012 Page 26 of 33

3',
'37
In order to provide broad-spectrum weed control, both single and split applications of this product must be
followed with a planned postemergence application of a labeled broadleaf and/or grass herbicide.
Observe the directions for use, precautions and restrictions on the label of the postemergence herbicide
before use of these products.
If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when
possible to eliminate existing weeds.
12.3.2 [Insert Brand Name] plus Atrazine
This tank mixture, when applied in a single application (alone or in a 3-way combination with Princep),
split application or as a sequential application to Princep in early preplant programs, will provide
preemergence control or reduced competition of annual grasses and broadleaf weeds listed in the
"WEEDS CONTROLLED" section of this label.
DO NOT graze treated area or feed treated forage to livestock for 60 days following application of this
tank mixture. . • . .
The maximum atrazine broadcast application rates for corn:
• If no atrazine was applied prior to corn emergence, apply a maximum of 2 pounds active ingredient
per acre broadcast. If a postemergence treatment is required following an earlier herbicide
application, the total atrazine applied may not exceed 2.5 pounds active ingredient per acre per
calendar year.
• Apply a maximum of 2.0 pounds active ingredient per acre as a single preemergence application
on soils that are not highly erodible or on highly erodible soils (as defined by the Natural
Resources Conservation Service) if at least 30 percent of the soil is covered with plant residues, or
• Apply a maximum of 1.6 pounds active ingredient per acre as a single preemergence application
on highly erodible soils (as defined by the Natural Resources Conservation Service) if less than 30
percent of the surface is covered with plant residues; or 2.0 pounds active ingredient per acre if
only applied postemergence.
CORN, SOYBEANS* OR MILO (SORGHUM) can be planted the year following use of this mixture.
* There is a possibility of injury due to carryover of atrazine if soybeans are planted the following year.
DO NOT plant soybeans the year following use of this tank mixture on furrow-irrigated corn.
Approved Application Systems
Ground: Broadcast boom
Dry Bulk Fertilizer Impregnation
Single application
Application of this product should be made less than 30 days before planting but prior to weed
emergence'.
NOTE: Application on coarse soils should not be made more than two weeks prior to planting.
Split application
Apply 60 percent of the application rate as a split application prior to weed emergence and no more than
45 days prior to planting and the remaining 40 percent at or immediately following planting but before
crop emergence. '
See the following table for specified broadcast rates per acre for single and split applications.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 27 of 33

c '37
Application Rates
SOIL TEXTURAL
GROUP
Coarse
Medium
Fine
BROADCAST RATE PER ACRE
[INSERT BRAND
NAME] *
(pints)
1.75
1.75 to 2.25
2.00 to 2.50
+
ATRAZINE 4L **
(quarts)
1 .25 to 1 .5
1.50 to 2.0
1.50 to 2.0
* Use the higher rates in the application rate ranges in areas of heavy weed infestation.
** Use rates listed in this label when using atrazine 4L. Use equivalent rates when using atrazine 90
percent dry flowable formulations. One quart of atrazine 4L equals 1.1 pounds of atrazine 90 percent
dry flowable.
If emerged weeds exist at planting, the application of a contact herbicide or tillage is recommended when
possible to eliminate existing weeds.
12.3.3 [Insert Brand Name] plus Atrazine following Princep I
Sequential Application
Apply 1 to 1.25 quarts per acre of Princep prior to weed emergence and no more than 45 days prior to
planting. At or immediately following planting, but before crop emergence, apply this tank mixture.
NOTE: LAND TREATED WITH PRINCEP SHOULD NOT BE PLANTED TO ANY CROP OTHER THAN
CORN FOR ONE YEAR FOLLOWING TREATMENT AS CROP INJURY MAY OCCUR. AFTER
HARVEST OF TREATED CROP, PLOW AND THOROUGHLY TILL THE SOIL IN THE FALL OR
SPRING TO MINIMIZE POSSIBLE INJURY TO SPRING SEEDED ROTATIONAL CROPS.
Following application of Princep, see the following table for application rates.
Application Rates
SOIL TEXTURAL
GROUP
Coarse
Medium
Fine
BROADCAST RATE PER ACRE
[INSERT BRAND
NAME] *
(pints)
1.75
2.25
2.25 to 2.5
+
ATRAZINE 4L **
(quarts)
1.25
1.50
1.50 to 2.0
Use the higher rates in the application rate ranges in areas of heavy weed infestation.
** Use rates listed in this label when using atrazine 4L. Use equivalent rates when using atrazine 90
percent dry flowable formulations. One quart of atrazine 4L equals 1.1 pounds of atrazine 90
percent dry flowable.
13.0 CONVENTIONAL TILLAGE
NOTE: Each section of this label provides specified treatment rates for this product and tank mixtures
including this product. Applications that are not consistent with recommendations in this label may result
in unsatisfactory weed,control, injury to crops, persons or animals, or other unintended consequences.
Refer to specific product labels for crop rotation restrictions and cautionary statements of all products
Reg. No. 524-473 Notified: 04-Dec-2012 Page 28 of 33

used in these tank mixtures, including precautions on soil pH sensitive varieties, minimum re-cropping
interval and rotational guidelines.
Use the higher rates in the application rate ranges in areas of heavy weed infestation or where otherwise
specified. If emerged weeds exist at planting, the application of a contact herbicide or tillage is
recommended when possible to eliminate existing weeds. Do not apply when conditions favor drift.
Detailed information regarding "APPLICATION SYSTEMS" and "APPLICATION TIMINGS AND
METHODS" should be carefully reviewed in conjunction with the information in this section. If the specific
information in this section differs from the "PRODUCT INFORMATION", the specific information should
control.
13.1 [Insert Brand Name] Herbicide
Apply this product in water or sprayable fluid fertilizer solution.
Approved Application Systems
Ground: Broadcast boom; banded
Dry Bulk Fertilizer Impregnation
Approved Application Methods
Preplant Incorporated; Preemergence Surface
Postemergence Surface
Apply this product prior to weed emergence and before corn reaches 11 inches in height. Do not exceed
3.4 pints per acre. Weeds emerged at the time of application are not controlled by this product. If weeds
are emerged at application, shallowly cultivate or rotary hoe to improve performance. DO NOT make
postemergence surface applications using sprayable fluid fertilizer as the carrier because severe crop
injury may occur.
Application Rates
SOIL TEXTURAL
GROUP
Coarse
Medium
Fine
BROADCAST RATE PER ACRE (pints) *
Less than 3%
organic matter
1 .25 to 1 .75
1.75 to 2.25
1 .75 to 2.25
3 % or more
organic matter **
1.75
1.75 to 2.25
2.25 to 2.75
* Use the higher rate in the application rate range in areas of heavy weed infestation.
** On soils with 6 to 10 percent organic matter use 2.5 to 3.4 pints/acre. On soils with more than 10
percent organic matter, use 3.4 pints per acre.
13.2 [Insert Brand Name] plus Roundup Agricultural Herbicides on Corn Containing Roundup
Ready 2 Technology including Roundup Ready Corn 2
This program may be used preemergence and postemergence to corn containing Roundup Ready 2
Technology including Roundup Ready Corn'2 from seedling emergence until the corn reaches 11 inches
in height. Refer to the Roundup agricultural herbicide labels for specific weeds controlled postemergence.
Reg. No. 524-473 Notified: 04-Dec-2012 Page 29 of 33

r '37
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS TANK-MIX TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS WHICH DO NOT CONTAIN A GLYPHOSATE
TOLERANCE GENE. -
Approved Application Systems
Ground: Broadcast boom
Approved Application Methods
Preemergence Surface
Sequential Program
This product may be applied preemergence to corn containing Roundup Ready 2 Technology including
Roundup Ready Corn 2 at the ROUNDUP READY RATE of 1.5 pints per acre in a planned
preemergence followed by Roundup agricultural herbicide postemergence sequential program.
Postemergence Surface
This product may be applied postemergence to corn containing Roundup Ready 2 Technology including
Roundup Ready Corn 2 from seedling emergence until the corn is 11 inches in height. The ROUNDUP
READY RATE for this product is 1.5 pints per acre. Labeled use rates for this tank-mix are defined in the
table below. Use the higher rate on larger weeds and where heavy weed infestations exist. This tank mix
should be applied when weeds are 2 to 4 inches in height and before the weed height and/or density
become competitive with the crop.
For difficult to control weeds such as fall panicum, barnyardgrass, crabgrass, shattercane, broadleaf
sjgnalgrass and Pennsylvania smartweed use the higher rate of Roundup Agricultural herbicides labeled
rates.
ROUNDUP READY RATE - [Insert Brand Name] at 1.5 pints per acre.
SOIL TEXTURAL GROUP
Coarse
Medium
Fine
BROADCAST RATE PER ACRE*
HARNESS
HERBICIDE +
(pints)
1.0 to 1.75
1.0 to 2.25
1.0 to 2.75
ROUNDUP
AGRICULTURAL HERBICIDES
Per Labeled Rate
Per Labeled Rate
Per Labeled Rate
13.3 [INSERT BRAND NAME] Tank-Mixtures for Preemergence Use in Corn
This product may be tank-mixed with the following products for preemergence use in corn.
Ensure that the specific product being used in the tank mixture is registered for application
preemergence to corn. Read and follow label directions of all products in the tank mixture. The
most restrictive label directions apply.
[Insert active ingredient(s) or brand name of product(s) containing the following active
ingredient(s) that, at the time of printing, are registered for use preemergence in com:
2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr, flumetsulam, flumiclorac
pentyl ester, glyphosate, isoxaflutole, linuron, mesotrione, metribuzin, pendimethalin, rimsulfuron
Aim, Aim EC, Axiom, Balance, Banvel, Callisto, Clarity, Define, Distinct, Epic, Hornet, Linex,
Lorox, Marksman, Prowl, Python, Python II, Resource, Shark]
Reg. No. 524-473 Notified: 04-Dec-2012 Page 30 of 33

r
13.4 [INSERT BRAND NAME] Tank-Mixtures for Postemergence Use in Corn
This product may be tank-mixed with the following products for postemergence use in corn.
Ensure that the specific product being used in the tank mixture is registered for application
postemergence (in-crop) to corn. Read and follow label directions of all products in the tank
mixture. The most restrictive label directions apply. .
[Insert active ingredient(s) or brand name of product(s) containing the following active
ingredient(s) that, at the time of printing, are registered for use postemergence to corn:
2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr, flumetsulam, flumiclorac
pentyl ester, glyphosate, isoxaflutole, linuron, mesotrione, metribuzin, pendimethalin, rimsulfuron
Aim, Aim -EC, Axiom, Balance, Banvel, Callisto, Clarity, Define, Distinct, Epic, Hornet, Linex,
Lorox, Marksman, Prowl, Python, Python II, Resource, Shark]
14.0 MISCANTHUS AND OTHER NON-FOOD PERENNIAL BIOENERGY CROPS
For weed control in Miscanthus and other non-food perennial bioenergy crops, apply [INSERT BRAND
NAME] at 1.3-1.7 pints per acre after the crop has been transplanted or after fully emerged to a height of
at least 2-3 inches.
Up to two applications of [INSERT BRAND NAME] may be made each year. The total amount of this
product applied each year must not exceed 3.4 pints per acre.
RESTRICTIONS:
Do not allow the Miscanthus or other non-food perennial bioenergy crop treated with [INSERT BRAND
NAME] to be grazed or used as animal feed.
15.0 FALL APPLICATIONS
Geographic Restriction on Fall Applications: only in Iowa, Minnesota, North Dakota. South Dakota.
Wisconsin, north of Route 91 in Nebraska and north of Route 136 in Illinois
Following soybean harvest, apply to soybean stubble after September 30, when the sustained soil
temperature at 4-inch depth is less that 55°F, but before ground freezes. Use on medium- and fine-
textured soils with greater than 2.5% organic matter. Only corn may be planted the following spring.
Ground may be tilled before or after application. Do not exceed 2-inch incorporation depth if tilled after
application. ^
If a spring application is made, the total rate of the fall plus spring .application must not exceed the
maximum labeled rate for corn grown on that soil.
16.0 LIMIT OF WARRANTY AND LIABILITY
This Company warrants that this product conforms to the chemical description on the label and is
reasonably fit for the purposes set forth in the Complete Directions for Use label booklet ("Directions")
when used in accordance with those Directions under the conditions described therein. TO THE EXTENT
CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY OR IMPLIED
Reg. No. 524-473 Notified: 04-Dec-2012 Page 31 of 33

cv 37
WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. This
warranty is also subject to the conditions and limitations stated herein.
To the extent consistent with applicable law, buyer and all users shall promptly notify this Company of any
claims whether based in contract, negligence, strict liability, other tort or otherwise.
Buyer and all users are responsible for all loss or damage from use or handling which results from
conditions beyond the control of this Company to the extent consistent with applicable |aw, including, but
not limited to, incompatibility with products other than those set forth in the Directions, unusual weather,
weather conditions which are outside the range considered normal at the application site and for the time
period when the product is applied, as well as weather conditions which are outside the application
ranges set forth in the Directions, application in any manner not explicitly set forth in the Directions,
moisture conditions outside the moisture range specified in the Directions, or the presence of products
other than those set forth in the Directions in or on the soil, crop or treated vegetation.
This Company does not warrant any product reformulated or repackaged from this product except in
accordance with this Company's stewardship requirements and with express written permission from this
Company.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY,
OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER
FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY
OR ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Buyer and all users are deemed to have accepted the terms of this LIMIT OF WARRANTY AND
LIABILITY which may not be varied by any verbal or written agreement.
[Insert Brand Name], Roundup, and Roundup Ready are trademarks of Monsanto Technology LLC.
[AgriSolutions is a trademark of Agriliance LLC.]
All other trademarks are the property of their respective owners.
EPA Reg. No. 524-473
In case of emergency involving this product,
Call Collect, day or night, (314)694-4000.
Packed For:
MONSANTO COMPANY
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI 63167
®[date]
Reg. No. 524-473 Notified: 04-Dec-2012 Page 32 of 33

Changes in this Notification submission:
Included New York county restriction statement
Included options container label statements referring to main label booklet
Reg. No. 524-473 Notified: 04-Dec-2012 ' Page 33 of 33