crop-chem-docs/corpus/epa_ppls/524-729.md

# MON 301108 Herbicide

- EPA Reg No: **524-729**
- Registrant: BAYER CROPSCIENCE, LLC
- Signal word: Caution
- Active ingredients: Glyphosate (51.2%)
- Label accepted: 2024-12-13
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000524-00659-20241213.pdf

---
1
December 13, 2024
Gaganpreet Kaur
Senior Registration Manager
Bayer CropScience LP
800 N. Lindbergh Blvd.
St. Louis, MO 63167
Subject: Label Amendment – Reformatting Label and Adding Use Directions for Cotton
with Glytol Technology
 Product Name: MON 301108 Herbicide
 EPA Registration Number: 524-659
 Application Date: 11/30/2020
 Case Number: 605362
Dear Gaganpreet Kaur:
The amended label referred to above, submitted in connection with registration under the
Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This
approval does not affect any conditions that were previously imposed on this registration. You
continue to be subject to existing conditions on your registration and any deadlines connected
with them.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all
previously accepted labeling. You must submit one copy of the final printed labeling before you
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c),
you may distribute or sell this product under the previously approved labeling for 18 months
from the date of this letter. After 18 months, you may only distribute or sell this product if it
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under FIFRA and is subject to review by the
Agency. If the website is false or misleading, the product would be misbranded and unlawful to
sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of
statements EPA may consider false or misleading. In addition, regardless of whether a website
is referenced on your product’s label, claims made on the website may not substantially differ
from those claims approved through the registration process. Therefore, should the Agency find

Page 2 of 2
EPA Reg. No. 524-659
Case No. 605362
or if it is brought to our attention that a website contains false or misleading statements or
claims substantially differing from the EPA approved registration, the website will be referred
to the EPA’s Office of Enforcement and Compliance.
Your release for shipment of the product constitutes acceptance of these conditions. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA section 6.
If you have any questions, please contact Sarah Meadows at 202-566-2828 or at
meadows.sarah@epa.gov.
Sincerely,
Emily Schmid, Product Manager 25
Herbicide Branch
Registration Division (7505P)
Office of Pesticide Programs

Master Label 524-659 Page 1 of 165 Revised June 2021
MASTER LABEL FOR EPA REG. NO. 524-659
Primary Brand Name:
MON 301108 Herbicide
Alternate Brand Names:
Roundup PowerMAX 3 Herbicide
Master Label Table of Contents
I. Directions for Use with Food and Feed Crops 2 - 113
II. Directions for Use on Industrial, Turf and Ornamental Sites 114 - 165
**See each label part for more detailed table of contents**
12/13/2024
524-659

Master Label 524-659 Page 2 of 165 Revised June 2021
I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
GLYPHOSATE GROUP 9 HERBICIDE
[INSERT BRAND NAME] [Logo]
Complete Directions for Use
EPA Reg. No. 524-659
A [Optional text: complete] broad-spectrum postemergence herbicide for weed control in many agricultural
systems
[Alternative product statement: Selective broad-spectrum weed control in Roundup Ready
£ and other listed
glyphosate tolerant crops]
[Alternative product statement: Non-selective, broad-spectrum weed control for many agricultural systems
and farmsteads]
[Optional label text: FOR CHEMICAL SPILL, LEAK , FIRE, OR EXPOSURE, CALL CHEMTREC AT (800)
424-9300]
[Optional label text: For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 hours a day 1-
800-334-7577]
[Optional label text: For PRODUCT USE information Call 1-866-99BAYER (1-866-992-2937]
[Optional statement for limited-geography product distribution: This product is not registered in all states.]
[Alternative or additional statements for limited-geography product distribution: For control of annual and
perennial weeds in [list states and or county-level information, as appropriate, where product is registered
and distributed]. [Optional text: *County Distribution:] [ Optional text: see inside for details.] [ Optional text:
In [list states] this product is distributed in the counties listed below:] [list counties by states]
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [ Optional text: GREEN] STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [ Optional text, if
applicable: EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY £ AND OTHER LISTED
GLYPHOSATE TOLERANT CROPS,] AS SEVERE PLANT INJURY OR DESTRUCTION COULD
RESULT.
[Optional label text: Transorb
£(Logo)]
[Optional label text: Transorb£ II Technology (Logo)]
[Optional label text: Transorb£ PLUS (Logo)]
[Optional label text: Transorb£PLUS Technology (Logo)]
[Optional label text: Trisorb£ (Logo)]
[Optional label text: CROPSHIELD® Formulation]
[Optional label text: CROPSHEILD £ Formula – formulated for listed Roundup Ready £ crops
(CROPSHIELD® Logo)]
[Optional label text: Herbicide for Roundup Ready£ and other listed glyphosate-tolerant crops]
[Optional label text: Roundup£ – Powerful Performance at a Practical Price]

Master Label 524-659 Page 3 of 165 Revised June 2021
[Optional label text: A member of the Roundup £ Family of [Optional text: Agricultural] Herbicides by Bayer
CropScience]
[Optional label statement, if applicable: See attached labeling [Alternative text: See inside] for Complete
Directions for Use [Optional text: in English and Spanish].
[Optional label statement for container labels with attached labeling: See Complete Directions for Use
attached to this label [Alternative text: See attached label booklet] for complete [Optional text, as applicable:
Agricultural [and Non-Agricultural] Use Requirements of the Worker Protection Standard, Directions for Use
[and] Limit of Warranty and Liability] [Optional text: in English and Spanish]
Not all products listed on this label are registered for use in California. Check the registration status of each
product in California before using.
Read the entire label before using this product.
Use only according to label directions.
Read the “LIMIT OF WARRANTY AND LIABILITY” statement [Optional text, if applicable: at the end of this
labeling] [Alternative optional text, if applicable: on side panel] [Alternative optional text, if statement not
included on the container label: at the end of the attached labeling] before buying or using. If terms are not
acceptable, return at once unopened.
[Insert net contents, as appropriate: NET [insert appropriate value or leave blank line for refillable container]
GAL [or other appropriate unit of measure] [Alternative text: NET CONTENTS] [Alternative label statement
for transport vehicles only: NET [Optional: CONTENTS]: See Bill of Lading]
LOT [Insert Lot number or blank space] [Alternative label statement for transport vehicles only: LOT: See
Bill of Lading]
[Optional text for container labels: ATTACH COMPLETE DIRECTIONS FOR USE HERE]
[Optional text for container labels with attached Directions for Use labeling that will be hidden behind the
attached labeling and only become visible if the labeling is removed: COMPLETE DIRECTIONS FOR USE
HAVE BEEN REMOVED]
CONTENTS
1 1.0 INGREDIENTS
2 2.0 IMPORTANT PHONE NUMBERS
3 3.0 PRECAUTIONARY STATEMENTS
 3.1 Hazards to Humans and Domestic Animals
 3.2 Environmental Hazards
 3.3 Physical or Chemical Hazards
4 4.0 STORAGE AND DISPOSAL
5 5.0 PRODUCT INFORMATION
6 6.0 WEED RESISTANCE MANAGEMENT
 6.1 Weed Management Practices
 6.2 Management of Glyphosate-Resistant Biotypes
7 7.0 MIXING
 7.1 Mixing with Water
 7.2 Tank Mixtures
 7.3 Tank-Mixing Procedure

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 4 of 165 Revised June 2021
 7.4 Mixing Spray Solution Concentrations
 7.5 Surfactants [ this section is optional in the final printed label]
 7.6 Ammonium Sulfate
 7.7 Colorants and Dyes
 7.8 Drift Reduction Additives
8 8.0 APPLICATION EQUIPMENT AND TECHNIQUES
 8.1 Spray Drift Management
 8.2 Aerial Application Equipment
 8.3 Ground Application Equipment
 8.4 Handheld Sprayers
 8.5 Selective Application Equipment
 8.6 Injection Systems
 8.7 Controlled Droplet Applicator (CDA)
9 9.0 ANNUAL AND PERENNIAL CROPS
 9.1 Cereal and Grain Crops
 9.2 Corn
 9.3 Cotton
 9.4 Fallow Systems
 9.5 Grain Sorghum (Milo)
 9.6 Herbs and Spices
 9.7 Oilseed Crops
 9.8 Soybean
 9.9 Sugarcane
 9.10 Vegetable Crops
 9.11 Miscellaneous Crops
10 10.0 TREE, VINE, AND SHRUB CROPS
 10.1 Berry and Small Fruit Crops
 10.2 Citrus Fruit Crops
 10.3 Pome Fruit Crops
 10.4 Stone Fruit Crops
 10.5 Tree Nut Crops
 10.6 Tropical and Subtropical Trees and Fruit Crops
 10.7 Vine Crops
 10.8 Miscellaneous Tree Food Crops
 10.9 Non-Food Tree Crops
11 11.0 PASTURE GRASSES, FORAGE LEGUMES AND RANGELAND
 11.1 Alfalfa, Clover, and Other Forage Legumes
 11.2 Conservation Reserve Program (CRP)
 11.3 Grass Seed and Sod Production
 11.4 Pastures
 11.5 Rangeland
12 12.0 ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS
 12.1 Alfalfa with Roundup Ready Technology
 12.2 Canola with Roundup Ready Technology (Spring Varieties)
 12.3 Canola with Roundup Ready Technology (Winter Varieties)
 12.4 Canola with TruFlex Technology (Spring Varieties)
 12.5 Field Corn Hybrids with Roundup Ready 2 Technology
 12.6 Sweet Corn Hybrids with Roundup Ready 2 Technology
 12.7 Field Corn Hybrids with Agrisure GT Technology

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 5 of 165 Revised June 2021
 12.8 Cotton with Roundup Ready Technology
 12.9 Cotton with Roundup Ready Flex Technology and XtendFlex Technology
 12.10 Cotton with GlyTol Technology
 12.11 Soybean with Roundup Ready Technology
 12.12 Soybean with Roundup Ready 2 Yield Technology, Roundup Ready 2 Xtend Technology,
and XtendFlex Technology
 12.13 Soybean with GT27 Technology and Enlist E3 Technology
 12.14 Sugarbeet with Roundup Ready Technology
13 13.0 FARMSTEAD USE
 13.1 Farmstead Weed Control, Trim-and-Edge
 13.2 Greenhouse/Shadehouse
 13.3 Chemical Mowing
 13.4 Cut Stump Application
 13.5 Habitat Management
14 14.0 ANNUAL WEEDS RATE SECTION
 14.1 Annual Weeds Tank Mixtures with 2,4-D, Dicamba, or Tordon 22K
 14.2 Annual Weeds Handheld Sprayers
 14.3 Annual Weeds Tank Mixtures for Fallow and Reduced Tillage Systems
15 15.0 PERENNIAL WEEDS RATE SECTION
16 16.0 WOODY BRUSH, TREES AND VINES RATE SECTION
17 17.0 TANK-MIX PRODUCT INFORMATION [this section printed only if required]
18 18.0 LIMIT OF WARRANTY AND LIABILITY

1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt ................................... 51.2%
OTHER INGREDIENTS: ..................................................................................................................... 48.8%
 100.0%
*Contains 705 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter or 5.88
pounds per U.S. gallon, which is equivalent to 575 grams of the acid, glyphosate, per liter or 4.8 pounds
per U.S. gallon (41.8% by weight).
[Optional label text that will be updated at the time of printing, if necessary:
[Optional label text, if applicable: Other Patents Pending.]
[Optional label text, if applicable: No license granted under any non-U.S. patent(s.]
[Option to insert reference to a Patent Website: For a list of patents, if any, covering this product or its use,
please go to www.monsantotechnology.com.]

EPA Est. [Insert appropriate EPA establishment number: 524-IA-1; 524-LA-1; or Other; or blank space]
[Optional text: (Establishment Number when entered here supersedes all others)]

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 6 of 165 Revised June 2021
[Alternative EPA establishment text: EPA Est. (L) 524-LA-1 or (M) 524-IA-1 Lot number prefix (L) or (M)
indicate appropriate establishment number.] [This lot number relationship with the establishment number
can be expanded or changed to include additional or add new producing sites, as appropriate.]
2.0 IMPORTANT PHONE NUMBERS
For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 hours a day 1-800-334-577
For PRODUCT USE information Call 1-866-99BAYER (1-866-992-2937)
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children
CAUTION
Causes moderate eye irritation. Avoid contact with eyes or clothing.
[Optional label statement, if applicable: See inside [Alternative text: See back panel] for additional] [Optional
text, as applicable: Precautions [and] First Aid]
FIRST AID
IF IN EYES x Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
x Remove contact lenses, if present, after the first 5 minutes then continue rinsing
eye.
x Call a poison control center or doctor for treatment advice.
IF ON SKIN OR
CLOTHING
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15 to 20 minutes.
x Call a poison control center or doctor for treatment advice.
x Have the product container or labeling with you when calling a poison control center or doctor, or going
for treatment.
x For emergency medical treatment information., call toll-free 24 hours a day 1-800-334-7577.
x This product is identified as [INSERT BRAND NAME], EPA Registration No. 524-659.
[Optional text, if applicable: LABEL CONTINUED ON BACK]
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic
animals; however, ingestion of this product or large amounts of freshly sprayed vegetation could result in
temporary gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed, provide
the animal with plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for more than
24 hours.
Personal Protective Equipment (PPE).
Applicators and other handlers must wear: long-sleeved shirt and long pants, socks and shoes.
Follow manufacturer’s instructions for cleaning/maintaining PPE (Personal Protective Equipment). If there
are no instructions for washables, use detergent and hot water. Keep and wash PPE separately from other
laundry.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 7 of 165 Revised June 2021
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be
provided all PPE specified above for “applicators and other handlers” and have such PPE immediately
available for use in an emergency, such as a spill or equipment breakdown.
User Safety Recommendations
Users should:
y Wash hands thoroughly after handling and before eating, drinking, chewing gum, using tobacco, or using
the toilet.
y Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
3.2 Environmental Hazards
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean
high-water mark. Do not contaminate water when cleaning equipment or disposing of equipment wash
waters and rinsate.
3.3 Physical or Chemical Hazards
Spray solutions of this product may be mixed, stored and applied using stainless steel, fiberglass, plastic
or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS. This product or spray solutions of this product react with such containers and tanks to produce
hydrogen gas, which can form a highly combustible gas mixture. This gas mixture could flash or explode if
ignited by open flame, spark, welder’s torch, lighted cigarette or other ignition source and cause serious
personal injury.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product
may only be used in accordance with the Directions for Use on this label or on separately published
supplemental labeling. Supplemental labeling for this product can be obtained from your Authorized Bayer
CropScience Retailer or Representative.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift.
Only protected handlers may be in the area during application. For any requirements specific to your State
or Tribe, consult the agency responsible for pesticide regulation.

Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part
170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by
the Worker Protection Standard.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 8 of 165 Revised June 2021
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours.
For early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, such as plants, soil, or water, wear: coveralls, shoes plus socks
and waterproof gloves.

Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is
used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated areas until spray solution has dried.
[Optional label text for container labels with attached labeling: See complete Directions for Use attached to
this label for complete [Optional text, as applicable: Agricultural [and Non-Agricultural] Use Requirements
of the Worker Protection Standard, Directions for Use [and] Limit of Warranty and Liability] [Optional text, if
applicable: in English and Spanish]
4.0 STORAGE AND DISPOSAL
STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product to
contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination. [Optional label text, if applicable for
separate Directions for Use labeling: See individual container label for additional storage conditions, if
any.]
PESTICIDE DISPOSAL: To avoid wastes, use all material in the container, including rinsate, by
application according to label directions. If wastes cannot be avoided, offer remaining product to a
waste disposal facility or pesticide disposal program. Such programs are often run by state or local
governments or by industry. All disposal must be in accordance with applicable federal, state and local
regulations and procedures.
CONTAINER HANDLING AND DISPOSAL: [Optional label text, if applicable for separate Directions for
Use labeling: See container label attached to the container for container handling and disposal
instructions and refilling limitations.]
[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID CONTAINERS OF LESS THAN 1-GALLON CAPACITY ]
Nonrefillable container. Do not reuse or refill the [this] container.
[Alternative container statement: Nonrefillable container. Do not reuse the container to hold materials other
than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily
hold rinsate or other pesticide-related materials in the container. Contact your state regulatory agency to
determine allowable practices in your state.]
Triple rinse the [this] container promptly after emptying.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 9 of 165 Revised June 2021
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake
for 10 seconds. Pour rinsate into application equipment or mix-tank, or store rinsate for later use or
disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure two more
times.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. [Alternative container disposal statement: Then offer the container
for recycling, if available.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID PLASTIC 2.5-GALLON CONTAINER AND OTHER NONREFILLABLE
CONTAINERS OF GREATER THAN 1 GALLON, BUT EQUAL TO OR LESS THAN 5-GALLON
CAPACITY]
Nonrefillable container. Do not reuse the [this] container to hold materials other than pesticides or dilute
pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other
pesticide-related materials in the [this] container. Contact your state regulatory agency to determine
allowable practices in your state.
[Alternative container statement: Nonrefillable container. Do not reuse or refill the [this] container.]
Triple rinse or pressure rinse (or equivalent) the [this] container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake
for 10 seconds. Pour rinsate into application equipment or mix-tank, or store rinsate for later use or
disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure two more
times.
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle into the side of the container and rinse at about 40 PSI for at least 30 seconds.
Continue to drain for 10 seconds after the flow begins to drip.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. [Alternative container disposal statement: Then offer the container
for recycling, if available.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 10 of 165 Revised June 2021
NONREFILLABLE RIGID PLASTIC 30-GALLO N CONTAINER AND OTHER NONREFILLABLE
CONTAINERS OF GREATER THAN 5-GALLON CAPACITY]
Nonrefillable container. Do not reuse or refill the [this] container.
[Alternative container statement: Nonrefillable container. Do not reuse the [this] container to hold materials
other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state regulatory
agency to determine allowable practices in your state.]
Triple rinse or pressure rinse (or equivalent) the [this] container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank. [Optional
label text: For containers not equipped with pumping systems,] Fill the container ¼ full with water. Replace
and tighten closures. Tip the container on its side and roll it back and forth for 30 seconds, ensuring at
least one complete revolution. Stand the container on its end and tip it back and forth several times. Turn
the container over onto its other end and tip it back and forth several times. Empty the rinsate into
application equipment or mix-tank, or store rinsate for later use or disposal. Repeat this procedure two
more times.
[Alternative or additional triple rinsing instructions for large containers equipped with pumping systems:
[Optional label text: For large containers equipped with pumping systems,] Fill the container about 10
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump
rinsate into application equipment or rinsate collection system. Repeat this procedure two more times.]
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle into the side of the container and rinse at about 40 PSI for at least 30 seconds.
Continue to drain for 10 seconds after the flow begins to drip.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
container collection site or picked up for recycling. [Alternative container disposal statement: Then offer the
container for recycling, if available.]
[Optional container disposal statement: Some container manufacturers offer container recycling. See
additional information regarding manuf acturer recycling programs attached to the [this] container, if
available. If no recycling information is available on the [this] container, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)] to find the nearest recycling location.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Optional container disposal statement: Return Properly Rinsed Container to Bayer CropScience for
Recycling – Call 1-866-99 BAYER (1-866-992-2937)] [ Alternative telephone numbers: 1-800-ROUNDUP
(1-800-768-6387)]
[Optional container disposal statement: IBC EMPTY? – FREE CALL – 1-888-SCHUETZ (1-888-724-8389)
www.schuetz.net/ticket; Schuetz ticket service]
[Optional container disposal statement: FREE IBC PICKUP] [For continental USA and Canada only]
[Optional container disposal statement: RETURNnet SYSTEM – To return empty IBC’s Email or Call –

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 11 of 165 Revised June 2021
www.returnnetsystem.com – 1-888-758-SHIP – United States and Canada (1-888-758-7447 – IBCNA –
Clarkston, Michigan – USA]

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR ALL
REFILLABLE CONTAINERS, EXCEPT TRANSPORT VEHICLES]
Refillable container. Refill the [this] container with pesticide only. Do not reuse the [this] container for any
other purpose.
Cleaning the [this] container before refilling is the responsibility of the individual refilling of the container.
Cleaning the [this] container before final disposal is the responsibility of the person disposing of the
container.
To clean the [this] container before final disposal, empty the remaining contents from the container into
application equipment or mix-tank. Fill the container about 10 percent full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate
collection system. Repeat this procedure two more times.
Then offer the container for recycling, if available.
[Optional container disposal statement: Some container manufacturers offer container recycling. See
additional information regarding manufacturer recycling programs attached to the [this] container, if
available. If no recycling information is available on the container, contact your chemical dealer [Optional
text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone numbers: 1-800-
ROUNDUP (1-800-768-6387)] to find the nearest recycling location.]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Optional container disposal statement: IBC EMPTY? – FREE CALL – 1-888-SCHUETZ (1-888-724-8389)
www.schuetz.net/ticket; Schuetz ticket service]
[Optional container disposal statement: FREE IBC PICKUP] [For continental USA and Canada only]
[Optional container disposal statement: RETURNnet SYSTEM – To return empty IBC’s Email or Call –
www.returnnetsystem.com – 1-888-758-SHIP – United States and Canada (1-888-758-7447 – IBCNA –
Clarkston, Michigan – USA]
[Optional container disposal statement: To obtain information about recycling refillable containers, contact
Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone numbers: 1-800-
ROUNDUP (1-800-768-6387)].
[Optional container disposal statement: Return Properly Rinsed Container to Bayer CropScience for
Recycling – Call 1-866-99BAYER (1-866-992-2937)] [Alternative telephone numbers: 1-800-ROUNDUP (1-
800-768-6387)]

[CONTAINER HANDLING AND DISPOSAL STATEMENT FOR ALL TRANSPORT VEHICLES, AS
DEFINED IN 40 CFR 156.3]
Emptied container retains vapor and product residue. Observe all precautions stated on this label until the
container is cleaned, reconditioned or destroyed. Prior to refilling, inspect carefully for damage such as
cracks, punctures, abr asions, and worn-out threads and closures . Clean thoroughly before reuse for
transportation of a material of different composition or before retiring this transport vehicle from service.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 12 of 165 Revised June 2021
[Additional label statement for transport vehicles only: FOR BULK PESTICIDE TRANSPORT ONLY]
[Additional label statement for transport vehicles only: THIS LABEL FOR USE WITH TRANSPORT
VEHICLES ONLY]

[STORAGE AND DISPOSAL FOR THE NONREFILLABLE SMART-PAK CONTAINER – A COMPOSITE
PACKAGING CONSISTING OF A LIGHTWEIGHT PL ASTIC CONTAINER INSIDE RIGID CARDBOARD
PACKAGING. ONCE IT IS FILLED, THE LIGHTWEIGHT PLASTIC CONTAINER IS NOT STORED,
TRANSPORTED OR SOLD WITHOUT THE OUTER CARDBOARD PACKAGING. ]
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product to
contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination. Do not store the [ this] container
unprotected from the weather, especially precipitation, for extended periods of time. DO NOT REMOVE
THE PLASTIC CONTAINER FROM THE PACKAGE UNTIL IT HAS BEEN EMPTIED AND PROPERLY
RINSED.
PESTICIDE DISPOSAL: To avoid wastes, use all material in the [ this] container, including rinsate, by
application according to label directions. If wastes cannot be avoided, offer remaining product to a waste
disposal facility or pesticide disposal program. Such programs are often run by state or local governments
or by industry. All disposal must be in accordance with applicable federal, state and local regulations and
procedures.
CONTAINER HANDLING AND DISPOSAL: Nonrefillable container. Do not reuse or refill the [ this]
container.
Triple rinse or pressure rinse (or equivalent) the inner plastic container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the inner plastic container ¼ full with water and
recap. Shake for 10 seconds. Pour rinsate into the application equipment or mix-tank, or store rinsate for
later use or disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure
two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle through the bottom of the container, ensuring that you puncture the inner plastic
container, and rinse at about 40 PSI for at least 30 seconds. Continue to drain for 10 seconds after the
flow begins to drip.
After rinsing, open the outer cardboard packaging and remove the inner plastic container.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. Recycle the cardboard separately. [Alternative container disposal
statement: Then offer the outer cardboard packaging and inner plastic container for recycling, if available.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or call 1-866-99BAYER (1-866-992-2937).]
If recycling is not available, dispose of each component in accordance with federal, state and local

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 13 of 165 Revised June 2021
regulations and procedures, which may include puncturing the properly rinsed inner plastic container and
disposing both the outer cardboard packaging and inner plastic container in a sanitary landfill.
[The inner plastic container of the Smart-Pak must be labeled with the following information ]
[INSERT BRAND NAME] [Logo optional]
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt .................................. 51.2%
OTHER INGREDIENTS: .................................................................................................................... 48.8%
 100.0%
*Contains 705 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter or 5.88
pounds per U.S. gallon, which is equivalent to 575 grams of the acid, glyphosate, per liter or 4.8 pounds
per U.S. gallon (41.8% by weight).
Keep out of reach of children
CAUTION
EPA Reg. No. 524-659
UNLESS THIS PLASTIC CONTAINER IS EMPTY AND HAS BEEN PROPERLY RINSED FOR
DISPOSAL, IT IS NOT TO BE REMOVED FROM ITS OUTER CARDBOARD PACKAGING. FOR MORE
INFORMATION, CALL 1-899-99BAYER (1-866-992-2937).
[Optional Smart-Pak container label statements:
- Protect this package from precipitation until emptied and properly rinsed.
- Use the cap to cut the foil seal.
- Invert cap over foil seal and rotate clockwise to cut the foil seal. Remove foil seal.
- East to Handle
- Uses less plastic than ordinary [Alternative text: typical] jugs
- Produces less plastic waster than ordinary [Alternative text: typical] jugs
- Compact Design
- Space Efficient
- Stackable
- Easy to Use
- Easy to Pour
- Easy to Recycle]

5.0 PRODUCT INFORMATION
Product Description: This product is a postemergence, systemic herbicide with no soil residual activity. It
is generally non-selective and gives broad-spectrum control of many annual and perennial weeds, woody
brush, trees and vines. It is formulated as a water-soluble liquid containing surfactant and may be applied
using standard and specialized pesticide application equipment after dilution and thorough mixing with
water or other carrier according to label directions.
[Optional label text: Do not add [Optional label text: surfactants, additives containing surfactants,] buffering
agents or pH adjusting agents to the spray solution when [ INSERT BRAND NAME ] is the only pesticide
being applied unless otherwise directed. See the “MIXING” section of this label for instructions regarding
other additives.]

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 14 of 165 Revised June 2021
[Optional label text: No additional surfactant is needed in the spray solution. This includes additives
containing surfactants, buffering agents or pH adjusting agents when [INSERT BRAND NAME] is the only
pesticide used unless otherwise directed.]
Mechanism of Action: Glyphosate works by targeting an enzyme that is essential for plant growth.
No Soil Activity: This product binds tightly to soil particles and does not provide residual weed control.
Weeds must be emerged at the time of application to be controlled by foliar application of this product.
Weed seeds in the soil will not be affected by this product and will continue to germinate. Unattached plant
rhizomes and rootstocks beneath the soil surface will also not be affected by this product.
Biological Degradation: Degradation of this product is primarily a biological process carried out by soil
microbes.
Stage of Weeds: Annual weeds are easiest to control when they are small. Performance of this product
on most perennial weeds is best when applied at late growth stages approaching maturity. Refer to the
“ANNUAL WEEDS RATE SECTION,” “PERENNIAL WE EDS RATE SECTION” and “WOODY BRUSH,
TREES AND VINES RATE SECTION” for more information on the control of specific weeds.
Cultural Considerations: Reduced weed control could result when this product is applied to annual or
perennial weeds that have been mowed, grazed or cut, and have not been allowed to re-grow prior to
application. Always use a higher product application rate within the given range when weed growth is heavy
or dense, or when weeds are growing in an undisturbed (non-cultivated) area. Reduced weed control could
also result when this product is applied to weeds that show signs of disease or insect damage, are covered
with dust, or are surviving under poor growing conditions.
Spray Coverage: For best results with this product, spray coverage must be uniform and complete. Do
not spray foliage to the point of runoff.
Rainfastness: Rainfall within 4 hours of application could wash this product off of the foliage and a second
application might then be needed to achieve acceptable weed control. Refer to specific use sections of this
label for additional information on the minimum intervals required before re-application of this product.
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the
root system. Visible effects are a gradual wilting and yellowing of the plant that advances to complete
browning of aboveground growth and deterioration of underground plant parts. Effects are visible on most
annual weeds within 2 to 4 days, but on most perennial weeds, effects might not be visible for 7 or more
days after application. Extremely cool or cloudy weather following application could slow activity of this
product and delay development of visual symptoms.
Maximum Application Rates: The maximum application or use rates stated throughout this label are given
in units of volume (fluid ounces or quarts) of this product per acre. However, the maximum allowable
application rates apply to this product combined with the use of any and all other herbicides containing the
active ingredient glyphosate, whether applied separately or in a tank mixture, on a basis of total pounds of
glyphosate (acid equivalents) per acre. If more than one glyphosate-containing product is applied to the
same site within the same year, you must ensure that the total use of glyphosate (pounds acid equivalents)
does not exceed the maximum allowed. See the “INGREDIENTS” section of this label for necessary product
information.
Unless otherwise specified on this label, the combined total application of this product on a site must not
exceed 5.0 quarts (6 pounds of glyphosate acid) per acre per year. For applications on non-crop sites, or
on tree, vine or shrub crop production sites, the combined total application of this product must not exceed
6.75 quarts (8 pounds of glyphosate acid) per acre per year.
Unless otherwise specified on this label in the sections that follow, the maximum single application rate of
this product is 3.125 quarts (3.75 pounds of glyphosate acid) per acre when applied using ground
application equipment and 40 fluid ounces (1.5 pounds of glyphosate acid) per acre when applied using

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 15 of 165 Revised June 2021
aerial application equipment. Unless otherwise specified on this label, multiple applications of this product
made be made onto a site up to the maximum annual application rates defined above. Allow a minimum
of 14 days between applications.
The following table provides the glyphosate application rate (pounds of glyphosate acid equivalents per
acre) when this product is applied at the application rates indicated (fluid ounces or quarts of this product
per acre).
Application Rate of
[INSERT BRAND NAME]
(amount of product per acre)
Application Rate of
Glyphosate Acid Equivalent (ae)
(pounds of ae per acre)
4 fluid ounces 0.15
8 fluid ounces 0.30
10 fluid ounces 0.375
15 fluid ounces 0.56
18 fluid ounces 0.675
20 fluid ounces 0.75
30 fluid ounces 1.125
40 fluid ounces 1.5
60 fluid ounces 2.25
80 fluid ounces 3.0
3.125 quarts 3.75
3.75 quarts 4.5
5 quarts 6.0
6.75 quarts 8.1
To determine the glyphosate acid equivalents (pounds of glyphosate ae per acre) for application rates of
[INSERT BRAND NAME] not listed here, multiply the application rate (fluid ounces per acre) by 0.0375.
Application Rate (fluid ounces per acre) x 0.0375 = Pounds of Glyphosate (ae) per acre
6.0 WEED RESISTANCE MANAGEMENT
GLYPHOSATE GROUP 9 HERBICIDE
Glyphosate, the active ingredient in this product, is a Group 9 herbicide based on the mechanism of action
classification system of the Weed Science Society of America. Any weed population can contain plants that
are naturally resistant to Group 9 herbicides. Weeds resistant to Group 9 herbicides can be effectively
managed by using another herbicide from a different Group (either alone or in a mixture according to label
directions), by using other cultural or mechanical methods of weed control, or a combination of the two.
Consult your local company representative, state cooperative extension agent, professional consultant or
other qualified authority to determine appropriate actions for controlling specific resistant weeds.
6.1 Weed Management Practices
Resistant populations arise when rare individual plants are uncontrolled by a normal dose of a given
herbicide under normal environmental conditions. In the absence of other control measures these
individuals survive, produce seed, and eventually become the dominant biotype in the field through

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 16 of 165 Revised June 2021
continuous selection. The best means of reducing this selection is to use diverse weed control practices
such as multiple herbicides with different mechanisms of action, and often in combination with various
mechanical and cultural practices.
Suspected herbicide resistance can be identified by these factors:
x Failure to control a weed species normally controlled by the herbicide at the dose applied, especially
when control is achieved on adjacent weeds
x A spreading patch of non-controlled plants of a particular species
x Surviving plants mixed with controlled individuals of the same species
To minimize the occurrence of herbicide-resistant biotypes, including those resistant to glyphosate,
implement the following weed management practice options that are practical to your situation. These
management practices are applicable to reduce the spread of suspected and confirmed resistant biotypes
(managing existing resistant biotypes) and to reduce the potential for selecting for resistance in new species
(proactive resistance management).
x Use a diversified approach toward weed management focused on preventing weed seed production and
reducing the number of weed seeds in the soil.
x Plant crops into fields that are as weed-free as possible and then keep them as weed-free as possible.
x Plant crop seed that is as weed-free as possible.
x Scout fields routinely, before and after herbicide application.
x Use multiple herbicide mechanisms of action that are effective against the most troublesome weeds on
your field and against those with known resistance.
x Apply herbicides at application rates listed on the label when weeds are within the size range indicated
on the label.
x Emphasize cultural practices that suppress weeds by using crop competitiveness.
x Use mechanical and biological weed management practices, where appropriate.
Manage weed seed at harvest and after harvest to prevent a buildup of the weed seedbank.
6.2 Management of Glyphosate-Resistant Biotypes
Appropriate testing is needed to determine if a weed is resistant to glyphosate. Call 1-866-99BAYER (1-
866-992-2937) [Alternative telephone numbers: 1-800-ROUNDUP (1-800-768-6387)] or contact your Bayer
CropScience representative to report any incidence of non-performance of this product against a particular
weed species.
To determine if resistance in any particular weed biotype has been confirmed in your area or for additional
information on glyphosate-resistant biotypes, go to www.weedscience.org.

It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information
on the spread and dispersal of resistant biotypes. Contact your local sales representative, crop advisor, or
extension agent to find out if suspected resistant weeds to this MOA have been found in your region. Do
not assume that each listed weed is being controlled by this mechanism of action.
Glyphosate-resistant weeds can be controlled or managed by applying this product in combination with
residual preemergence herbicides and/or other postemergence herbicides labeled for control of the
targeted weed on the site of application. For more information, see the “ANNUAL WEEDS RATE SECTION”
and “PERENNIAL WEEDS RATE SECTION” of this label.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 17 of 165 Revised June 2021
Since the occurrence of resistant weeds is difficult to detect prior to use, to the extent consistent with
applicable law, Bayer CropScience accepts no liability for any losses that result from the failure of this
product to control resistant weeds.
7.0 MIXING
Spray solutions of this product may be mixed, stored and applied using clean stainless steel, fiberglass,
plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS.
Eliminate any risk of siphoning the contents of the tank back into the carrier source while mixing. Use
approved anti-back-siphoning devices where required by State or local regulations.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.
Clean sprayer parts promptly after using this product by thoroughly flushing with water.
7.1 Mixing with Water
PERFORMANCE OF THIS PRODUCT CAN BE SIGN IFICANTLY REDUCED IF WATER CONTAINING
SOIL SEDIMENT IS USED AS CARRIER. DO NOT MIX THIS PRODUCT WITH WATER FROM PONDS
OR DITCHES THAT IS VISIBLY MUDDY OR MURKY.
This product mixes readily with water. Mix spray solutions of this product as follows. Begin filling the mixing
tank or spray tank with clean water. Add the required amount of this product near the end of the filling
process and mix gently. Foaming of the spray solution can occur during mixing. To prevent or minimize
foaming, mix gently, terminate bypass and return lines at the bottom of the tank, and, if necessary, add an
appropriate anti-foam or defoaming agent to the spray solution.
7.2 Tank Mixtures
This product does not provide residual weed control. This product may be tank-mixed with other herbicides
to provide residual weed control in the soil, a broader weed control spectrum, or an alternate mechanism
of action.
Some tank-mix products have the potential to cause crop injury under certain conditions, at certain growth
stages, and/or under other circumstances. Read the label of all products to be used in the tank mixture
prior to use to determine the potential for crop injury.
Tank mixtures with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers could result
in reduced weed control or crop injury. Bayer CropScience has not tested all tank-mix product formulations
for compatibility, antagonism or reduction in product performance. To the extent consistent with applicable
law, buyer and all users are responsible for any and all loss or damage in connection with the use or
handling of mixtures of this product with herbicides or other materials.
When a tank-mix with a generic active ingredient, such as 2,4-D, atrazine, dicamba, diuron, pendimethalin,
or any other product or material, is listed on this label, it is the responsibility of the pesticide user to ensure
that the intended use is included on the label of each product added to the mix.
Refer to all individual product labels, supplemental labeling and Fact Sheets for all products in the tank
mixture, and observe all precautions and limitations on the label, including any application timing
restrictions, soil restrictions, minimum re-cropping intervals and/or crop rotation restrictions. Users must
follow the most restrictive directions for use and precautionary statements for each product in the tank
mixture.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 18 of 165 Revised June 2021
For optimal overall weed control, apply tank mixtures with this product at a minimum spray volume rate of
10 gallons per acre.
7.3 Tank-Mixing Procedure
Always predetermine the compatibility of all tank-mix products together in the carrier by mixing small
proportional quantities in advance.
Mix only the quantity of spray solution that will be applied that day. Application of tank-mix solutions that
are allowed to stand overnight could result in reduced weed control.
Prepare tank mixtures of this product as follows:
1. Place a 20- to 35-mesh screen or wetting basket over the filling port of the tank.
2. Through the screen, fill the tank one-half full with water and start gentle agitation.
3. If ammonium sulfate is to be used, add it slowly through the screen into the tank and continue adding
water into the tank through the screen. If dry ammonium sulfate is being used, ensure that it is
completely dissolved in the tank before adding other products.
4. If a wettable powder is used, prepare a slurry of it with water and add it SLOWLY through the screen
into the tank while continuing gentle agitation.
5. If a flowable formulation is used, premix one part flowable with one part water and add the diluted
mixture SLOWLY through the screen into the tank while continuing gentle agitation.
6. If an emulsifiable concentrate formulation is used, premix one part emulsifiable concentrate with two
parts water and add the diluted mixture SLOWLY through the screen into the tank while continuing
gentle agitation.
7. Continue filling the tank with water through the screen and add the required amount of this product near
the end of the filling process.
8. [ Optional label statement: If a nonionic surfactant is used, add it to the tank before completing the filling
process.]
9. Add individual tank-mix components to the tank in the following order: wettable powders, flowables,
emulsifiable concentrates, drift reduction additives, water soluble liquids (this product) [ Optional text: ,
surfactant].
Maintain gentle agitation at all times until the contents of the tank are sprayed out. If the spray mixture is
allowed to settle, agitate thoroughly to re-suspend the mixture before resuming application.
Keep by-pass and return lines on or near the bottom of the tank to minimize foaming.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.

7.4 Mixing Spray Solution Concentrations
All reference throughout this label to concentration of this product in a spray solution is on a percentage-
of-volume basis.
Prepare the desired volume of spray solution at a given concentration by mixing the amount of this product
indicated in the following table in water.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 19 of 165 Revised June 2021
Desired Volume of
Spray Solution
Amount of [INSERT BRAND NAME]
to Achieve Indicated Concentration in Spray Volume
(percent by volume)
0.3% 0.6% 0.9% 1.3% 3.1% 6.2%
1 gallon 0.4 fl oz 0.8 fl oz 1.2 fl oz 1.7 fl oz 4 fl oz 8 fl oz
25 gallons 10 fl oz 0.6 qt 0.9 qt 1.3 qt 3.1 qt 6.2 qt
100 gallons 1.2 qt 2.4 qt 3.6 qt 1.3 gal 3.1 gal 6.2 gal
2 tablespoons = 1 fluid ounce (fl oz)
For filling backpack and pump-up sprayers, consider mixing the appropriate amount of this product with
water in a larger container and then filling the sprayer from the larger container.
7.5 Surfactants [this section is optional in the final printed label]
Although not always required, nonionic surfactants that are labeled for use with herbicides may be added
to spray solutions of this product. Do not reduce application rates or concentration of this product when
applying in spray solutions containing additional surfactant.
[Optional text: Additional surfactant can increase the performance of this product at water carrier volumes
above 30 gallons per acre or at application rates below 15 fluid ounces of product per acre.
 [Optional text: Use a surfactant concentration of 0.25 to 0.5 percent (1 to 2 quarts per 100 gallons of spray
solution) when adding surfactant that contains at least 70 percent active ingredient, or a 1-percent
surfactant concentration (4 quarts per 100 gallons of spray solution) when adding surfactant that contains
less than 70 percent active ingredient.]
Read and follow the directions for use and observe all precautionary statements and other information on
the surfactant label.
[Optional text: DO NOT add buffering agents or pH adjusting agents to the spray solution when [ INSERT
BRAND NAME] is the only pesticide product being applied.]
DO NOT ADD ADDITIONAL SURFACTANT OR A DDITIVES CONTAINING SURFACTANT TO THIS
PRODUCT FOR PREHARVEST APPLICATION TO COTTON [Optional text only if use in glyphosate-
tolerant crops is included on the final printed labeling: OR ANY POSTEMERGENCE (IN-CROP)
APPLICATION TO COTT ON WITH ROUNDUP READY, ROUNDUP READY FLEX, XTENDFLEX, OR
ANY OTHER GLYPHOSATE-TOLERANT COTTON TECHNOLOGY.
7.6 Ammonium Sulfate
Unless otherwise directed, the addition of 1 to 2 percent dry ammonium sulfate by weight (8.5 to 17 pounds
per 100 gallons of water), could increase the performance of this product on annual and perennial weeds,
particularly under hard water conditions, drought conditions or when tank-mixed with certain residual
herbicides. An equivalent amount of a liquid formulation of ammonium sulfate may also be used. Ensure
that dry ammonium sulfate is completely dissolved in the spray tank before adding herbicides. Thoroughly
rinse the spray system with clean water promptly after use to reduce corrosion.
When using ammonium sulfate, apply this product at rates or spray solution concentrations as directed on
this label; lower application rates or concentration could result in reduced performance.
7.7 Colorants and Dyes
Colorants and marking dyes may be added to spray solutions of this product; however, they can reduce the
performance of this product. Use colorants and dyes according to the manufacturer’s directions.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 20 of 165 Revised June 2021
7.8 Drift Reduction Additives
Drift reduction additives may be used with all application equipment types, except wiper applicators, sponge
bars and controlled droplet applicators (CDA). However, use of drift reduction additives can affect spray
coverage, which could reduce the performance of this product. When a drift reduction additive is used,
read and follow all directions for use, precautions, limitations and other information on the product label.
8.0 APPLICATION EQUIPMENT AND TECHNIQUES
This product may be applied using the following equipment:
Aerial Application Equipmentfixed-wing and helicopter
Ground Application Equipment boom or boomless systems, pull-type sprayers, floaters, pick-up
sprayers, spray coupes and other ground broadcast application equipment
Handheld Sprayers backpack sprayers, pump-up pressure sprayers, handguns, handwands,
mistblowers*, lances and other handheld and motorized spray equipment used to direct the spray onto
undesirable foliage
* This product is not registered in California or Arizona for use in mistblowers.
Selective Application Equipmentshielded and hooded sprayers, wiper applicator, sponge bar
Injection Systemsaerial or ground injection sprayers
Controlled Droplet Applicator (CDA) handheld or boom-mounted applicators that produce a spray
pattern consisting of a narrow range of droplet sizes
APPLY THIS PRODUCT USING PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE
OF ACCURATELY DELIVERING DESIRED VOLUMES.
Do not apply this product through any type of irrigation system.
8.1 Spray Drift Management
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [ Optional text: GREEN] STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [ Optional text, if
applicable: EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY
® AND OTHER LISTED
GLYPHOSATE TOLERANT CROPS,] AS SEVERE PLANT INJURY OR DESTRUCTION COULD
RESULT.
Do not allow the herbicide solution to mist, drip, drift, or splash onto desirable vegetation, as small quantities
of this product can cause severe damage or destruction to the crop, plants, or other vegetation on which
application was not intended.
AVOID DRIFT. USE EXTREME CARE TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS
WHEN APPLYING THIS PRODUCT.
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many
equipment- and weather-related factors determines the potential for spray drift. The applicator and grower
are responsible for considering all these factors when making decisions regarding the application of this
product.
The likelihood of injury occurring as the result of spray drift while applying this product increases when
winds are gusty, as wind velocity increases, when wind direction is constantly changing or when there are
other meteorological conditions that favor spray drift. When spraying, avoid combinations of pressure and
nozzle type that will result in splatter or generation of fine particles (mist) that are likely to drift.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 21 of 165 Revised June 2021
TO PREVENT INJURY TO ADJACENT DESIRABL E VEGETATION, APPROPRIATE BUFFERS MUST
BE MAINTAINED.
AVOID APPLYING THIS PRODUCT AT EXCESSIVE SPEED OR SPRAYER PRESSURE.
8.2 Aerial Application Equipment
Unless otherwise prohibited, all broadcast applications of this product described on this label may be made
using aerial application equipment where appropriate, provided that the applicator complies with the
precautions and restrictions specified on this label or on separate supplemental labeling published for this
product.
DO NOT APPLY THIS PRODUCT USING AERIAL APPLICATION EQUIPM ENT EXCEPT UNDER
CONDITIONS SPECIFIED ON THIS LABEL OR ON SEPARATELY PUBLISHED SUPPLEMENTAL
LABELING FOR THIS PRODUCT.
FOR SPECIFIC USE INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS RELATED TO THE
AERIAL APPLICATION OF THIS PRODUCT IN ARKANSAS AND CALIFORNIA, OR SPECIFIC
COUNTIES THEREIN, REFER TO THE LIMITATIONS ON AERIAL APPLICATION IN THAT STATE OR
COUNTY PRESENTED IN THIS SECTION.
Unless otherwise directed, the maximum single application rate of this product is 40 fluid ounces per acre
when using aerial application equipment. Apply this product at the appropriate rate in 3 to 15 gallons of
water per acre unless otherwise directed on this label or on separate supplemental labeling for this product.
Refer to the individual use sections of this label for application rates, spray volumes and additional
directions for use.
Drift control reduction additives may be used.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking
devices.
Aircraft Maintenance
Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this
product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO
UNCOATED STEEL SURFACES COULD RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic coating (paint) that
meets aerospace specification MIL-C-38413 can help prevent corrosion.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to minimize off-target drift movement during
aerial application. [ Optional label text, if applicable: These requirements do not apply to forestry
applications.]
1. The distance of the outermost nozzles on the boom must not exceed 3/4 the length of the wingspan or
rotor.
2. Nozzles must always point backward, parallel with the air stream and never be pointed downwards
more than 45 degrees. Where states have more stringent regulations, they must be followed.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets. The best drift management
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets
reduces drift potential, but will not prevent drift if the application is made improperly or under unfavorable
environmental conditions, such as in windy, high temperature with low humidity, and/or inversion conditions
as described below.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 22 of 165 Revised June 2021
Controlling Droplet Size
x Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the higher
rated flows produce larger droplets.
x Pressure: Operate sprayer at a pressure towards the lower end of the range listed for the nozzle.
Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow rates
are needed, use higher flow rate nozzles instead of increasing the pressure.
x Number of nozzles: Use the minimum number of nozzles that provide uniform coverage.
x Nozzle orientation: Orienting nozzles so that the spray is released backwards, parallel to the air
stream, will produce larger droplets than other orientations. Significant deflection from the horizontal
will reduce droplet size and increase drift potential.
x Nozzle type: Use a nozzle type that is designed for the intended application. With most nozzle types,
narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles
oriented straight back produce larger droplets than other nozzle types.
x Boom length: For some use patterns, reducing the effective boom length to less than 3/4 of the
wingspan or rotor length could further reduce drift without reducing swath width.

x Application height: Application must be made at a height of 10 feet or less above the top of the largest
plants unless a greater height is required for aircraft safety. Making the application at the lowest height
that is safe reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When an application is made with a crosswind present, the swath will be displaced downwind. Therefore,
on the upwind and downwind edges of the field, the applicator must compensate for this displacement by
adjusting the path of the aircraft upwind. Increase the swath adjustment distance with increasing drift
potential (higher wind, smaller droplets, etc.).
Wind
Drift potential is lowest at wind speeds of between 2 and 10 miles per hour. However, many factors,
including droplet size and equipment type, determine drift potential at any given wind speed. Avoid
application when wind speeds are below 2 miles per hour due to variable wind direction and high inversion
potential. NOTE: Local terrain can influence wind patterns. Every applicator must be familiar with local wind
patterns and how they affect drift.
Temperature and Humidity
When making an application in low relative humidity, set application equipment to produce larger droplets
to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry.
Temperature Inversion
Do not apply this product using either aerial or ground broadcast application equipment during a
temperature inversion as drift potential is high under these conditions. Temperature inversions restrict
vertical air mixing, which causes small droplets to remain suspended in a concentrated cloud. This cloud
can move in unpredictable directions due to the light variable winds common during inversions.
Temperature inversions are characterized by increasing temperatures with altitude and are common on
nights with limited cloud cover and light to no wind. They begin to form as the sun sets and often continue
into the morning. Their presence can be indicated by ground fog; however, if fog is not present, inversions
can also be identified by the movement of smoke from a ground source or an aircraft smoke generator.
Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an
inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 23 of 165 Revised June 2021
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies
of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., when
wind is blowing away from a sensitive area).
Avoid direct application to any body of water.
State Specific Limitations on Aerial Application [The following section is optional to be used only if
required by the States indicated.]
LIMITATIONS ON AERIAL APPLICATION IN CALIFORNIA ONLY
DO NOT apply this product using aerial application equipment in residential areas.
AVOID DRIFT – DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION
THAT FAVORS DRIFT. DRIFT OF THIS PR ODUCT ONTO ANY VEGETATION TO WHICH
APPLICATION WAS NOT INTENDED CAN CAUSE DAMAGE. TO PREVENT INJURY TO ADJACENT
DESIRABLE VEGETATION, USE PROPER AERIAL APPLICATION EQUIPMENT FITTED WITH
APPROPRIATE NOZZLES AND MAINTAIN ADEQUATE BUFFERS.
Follow the directions below when making an aerial application near non-target crops, desirable annual
vegetation, or desirable perennial vegetation after bud break and before total leaf drop.
1. Do not apply this product within 100 feet of all desirable vegetation or non-target crops.
2. If winds are blowing up to 5 miles per hour TOWARD desirable vegetation or non-target crops, do
not apply this product within 500 feet of the desirable vegetation or crops.
3. If winds are blowing between 5 and 10 miles per hour TOWARD desirable vegetation or non-target
crops, a buffer zone greater than 500 feet might be needed to protect the desirable vegetation or
crops.
4. Do not apply this product using aerial application equipment when winds are blowing in excess of
10 miles per hour.
5. Do not apply this product using aerial application equipment when inversion conditions exist.
When tank-mixing this product with 2,4-D, only 2,4-D amine formulations may be applied in California
using aerial application equipment. Tank mixtures of this product with 2,4-D amine formulations may
be applied by air in California in fallow fields and in reduced tillage systems, and for alfalfa and pasture
renovation applications only.
This product, when tank-mixed with dicamba, may not be applied by air in California.
ADDITIONAL LIMITATIONS ON AERIAL APPLICATION
IN FRESNO COUNTY, CALIFORNIA ONLY
Always read and follow the label directions and precautionary statements for all products used in the
aerial application.
The following information applies only from February 15 through March 31 within the following
boundaries of Fresno County, California:
 North: Fresno County line
 South: Fresno County line
 East: State Highway 99
 West: Fresno County line

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 24 of 165 Revised June 2021
Observe the following directions to minimize off-site movement during aerial application of this product.
Minimization of off-site movement is the responsibility of the grower, Pest Control Advisor and aerial
applicator.
Written Directions
Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural
Commissioner 24 hours prior to the application. These written directions MUST state the proximity of
surrounding crops and that conditions of each manufacturer’s product label and this label have been
satisfied.
Aerial Applicator Training and Equipment
Aerial application of this product is limited to pilots who have successfully completed a Fresno County
Agricultural Commissioner and California Department of Pesticide Regulation approved training
program for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified
at a Fresno County Agricultural Commissioner approved fly-in. Test and calibrate spray equipment at
intervals sufficient to ensure that proper rates of herbicides and adjuvants are being applied during
commercial use. Applicator must document such calibrations and testing. Demonstration of
performance at Fresno County Agricultural Commissioner approved fly-ins constitutes such
documentation, or other written records showing calculations and measurements of flight and spray
parameters acceptable to the Fresno County Agricultural Commissioner.
Application at Night – Do not apply this product by air earlier than 30 minutes prior to sunrise and/or
later than 30 minutes after sunset without prior permission from the Fresno County Agricultural
Commissioner.
For additional information on the proper aerial application of this product in Fresno County, call 1-866-
99BAYER (1-866-992-2937).
LIMITATIONS ON AERIAL APPLICATION IN ARKANSAS ONLY
AVOID DRIFT. DO NOT APPLY INTO STILL AIR WHERE THERE IS A TEMPERATURE INVERSION
LAYER LOW ENOUGH FOR FINE SPRAY PARTICLES TO BECOME SUSPENDED AND MOVE
OUTSIDE THE TARGET AREA WHEN THE INVERSION LAYER MOVES. DO NOT APPLY WHEN
WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION THAT FAVORS DRIFT. DRIFT IS LIKELY
TO CAUSE DAMAGE TO ANY VEGETATION CONTACTED. TO PREVENT INJURY TO ADJACENT
DESIRABLE VEGETATION, APPROPRIATE BUFFER ZONES MUST BE MAINTAINED.
Apply this product at the appropriate rate in 3 to 15 gallons of water per acre.
Use sufficient carrier volume and appropriate equipment set-up to form droplets large enough to avoid
drift potential. Coarse droplets in the 300 to 500 (VMD) micron range have a lower drift potential.
Applications are typically to be made with the nozzle release point at 8 to 15 feet above the top of the
target plants unless a greater height is required for aircraft safety.
The distance of the outermost nozzles on the boom must not exceed 75 percent of the length of the
wingspan or rotor. In many cases, reducing this distance to 65 percent of the length of the wingspan or
rotor will improve drift control without affecting the swath width.
Nozzles must always discharge backward parallel with the air stream and never discharge downwards
more than 45 degrees on fixed wing aircraft or forward of the prevailing airflow on rotary winged aircraft.
Avoid the use of nozzles with wide-angle discharge.
Do not apply this product when winds are in excess of 10 miles per hour.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 25 of 165 Revised June 2021
Do not apply when there is a low-level inversion where fine spray particles could be suspended in still
air and move outside the target area when the inversion layer moves. These conditions can occur when
wind speeds are less than 2 miles per hour.
Follow the directions below when an aerial application is made near non-target crops or other desirable
vegetation:
1. Do not apply this product within 100 feet of non-target crops or any desirable vegetation.
2. If winds are blowing up to 5 miles per hour TOWARD non-target crops or desirable vegetation, do
not apply this product within 500 feet upwind of the desirable vegetation or crop.
3. If winds are blowing between 5 and 10 miles per hour TOWARD non-target crops or desirable
vegetation, a buffer zone greater than 500 feet might be needed to protect the crop or desirable
vegetation.

8.3 Ground Application Equipment
Apply this product at an appropriate rate specified on this label in 3 to 40 gallons of water per acre when
making a broadcast application using ground application equipment, unless otherwise directed on this label
or on separate supplemental labeling or Fact Sheets published for this product. As the weed density
increases, increase the spray volume towards the upper end of this range to ensure complete coverage.
Use nozzles that will avoid generating a fine mist. For best performance of this product when using ground
application equipment, use flat-fan nozzles. Check spray pattern for uniform distribution of spray droplets.
8.4 Handheld Sprayers
When using a handheld sprayer, apply spray solutions of this product uniformly and completely to the
foliage of target weeds using a coarse droplet spectrum and a spray-to-wet technique; do not spray to the
point of runoff. For the appropriate concentration of this product in the spray solution and timing of
application to control certain weeds, woody brush, trees and vines, refer to the “ANNUAL WEEDS RATE
SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY BRUSH, TREES AND VINES RATE
SECTION” of this label.
Spot application of this product for weed control in a cropping system using a handheld sprayer may be
made only when specifically directed on this label or on separate supplemental labeling for this product.
The crop sprayed with this product will be killed along with the weeds. Take care not to spray or allow
spray to drift outside the target area in order to avoid unwanted crop destruction.
8.5 Selective App lication Equipment
Selective application equipment allows this product to be applied to weeds growing near the crop or other
desirable vegetation without killing the desirable vegetation. Selective application equipment must be
capable of preventing all contact of the herbicide solution with the crop or other desirable vegetation and
operated without spray mist escape, leakage or dripping of the herbicide solution.
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION. Contact of this product with
desirable vegetation could result in unwanted plant damage or destruction. To the extent consistent with
applicable law, such damage shall be the sole responsibility of the applicator.
Shielded and Hooded Sprayers
A shielded sprayer directs the herbicide solution to the target weeds while using an impervious material, or
shield, to protect nearby desirable vegetation from coming into contact with the herbicide spray. To provide
maximum protection for desirable vegetation, keep shield properly adjusted and use nozzles that provide
uniform coverage within the application area.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 26 of 165 Revised June 2021
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully enclosed, including the top,
sides, front and back, thereby shielding the crop or other desirable vegetation from the spray solution.
This product may be diluted in water and applied using a shielded or hooded sprayer to weeds listed on
this label growing on any terrestrial non-crop site described on this label and in between rows of plants (row
middles) in any cropping system listed on this label.
Properly adjust the hood to protect desirable vegetation. Ensure that the hood is capable of completely
enclosing the spray pattern. If necessary when applying around crops grown on raised beds, extend the
front and rear flaps of the hooded sprayer downward to reach the ground in deep furrows
A hooded sprayer must be configured and operated in a manner that minimizes bouncing and avoids raising
the hood up off the ground surface at any time. If the hood is raised, spray particles can escape and come
into contact with the crop, causing damage to or destruction of the crop or other desirable vegetation. Avoid
operating this equipment on rough or sloping terrain where the spray hood is likely to rise up off the ground
surface.
Use hoods designed to minimize excessive dripping or runoff down the inside of the hood, such as a single,
low pressure, low-drift, flat-fan nozzle with an 80 to 95-degree spray angle positioned at the top center of
the hood, with a spray volume of 20 to 30 gallons per acre.
The following procedures will help reduce the potential for crop injury when using a hooded sprayer:
x Operate the sprayer with the hood on the ground or skimming across the ground surface.
x Leave at least an 8-inch untreated strip over the drill row. (For example, if the crop row width is 38
inches, make the maximum width of the spray hood 30 inches.)
x Operate at a ground speed of no greater than 5 miles per hour to minimize bouncing of the hooded
sprayer.
x Apply when wind speed is 10 miles per hour or less.
x Use low-drift nozzles that will provide uniform coverage within the application area.
Injury to a crop or other desirable vegetation can occur when application is made to foliage of weeds that
come into direct contact with the crop or desirable vegetation. Do not apply this product when leaves of
desirable vegetation are growing in direct contact with weeds. Droplets, mist, foam or splatter of the
herbicide solution settling onto desirable vegetation can result in discoloration, stunting or destruction.
Wiper Applicator
A wiper applicator is a device that physically wipes this product or solutions of this product directly onto the
target weed or cut stump. Any handheld device that is capable of physically wiping this product or solutions
of this product directly onto the target weed or cut stump, such as a paint brush, may be used.
Wiper applicators may be used over the top of food or feed crops ONLY if specifically permitted for use
over that crop by this label or by separately published supplemental labeling for this product.
A mechanical wiper applicator, such as a rope wick or sponge bar that can be driven through a field over
the top of a crop or other desirable vegetation to control weeds that are taller than the desirable vegetation,
must be designed, maintained and operated to prevent the herbicide solution from coming into contact with
desirable vegetation. Droplets, mist, foam or splatter of the herbicide solution settling onto desirable
vegetation can result in discoloration, stunting or destruction.
 Avoid leakage or dripping onto desirable
vegetation. To protect the crop or other desirable vegetation, adjust the height of the applicator to ensure
that the wiper contact point is a minimum of 2 inches above the desirable vegetation.
Weeds that do not come into contact with the herbicide solution will not be affected. Better results can also
occur when weeds are a minimum of 6 inches above the desirable vegetation. Poor contact can also occur

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 27 of 165 Revised June 2021
when weeds are growing in dense clumps, when operating in an area of severe weed infestation, or when
weed height varies dramatically. In these situations, more than one application of this product might be
necessary.
For optimal results, operate wiper applicators at a ground speed of no greater than 5 miles per hour.
Performance in areas of heavy weed infestation can be improved by reducing speed, which will provide
more time for re-saturation of the wiper with the herb icide solution and more contact time of the wiper with
the weed. Better weed control using a wiper applicator can be obtained when two applications are made
travelling in opposite directions in the field.
Keep wiper surfaces clean.
Be aware that on sloping ground the herbicide solution can migrate to one side, causing dripping on the
lower end and drying of the wiper on the upper end of the applicator.
Do not apply this product using a wiper applicator when weeds are wet.
Do not add surfactant to the herbicide solution when using a wiper applicator.
With Rope Wick and Sponge Bar Applicators , apply solutions ranging from 33 to 75 percent of this
product in water.
With Panel Applicators, apply solutions ranging from 33 to 100 percent (undiluted) of this product in water.
Mix only the amount of this product that will be used during a 1-day period, as reduced product performance
can result from the use of solutions held in storage.
Clean wiper parts promptly after using this product by thoroughly flushing with water.
8.6 Injection Systems
This product may be used in aerial and ground injection spray systems as a liquid concentrate or diluted
prior to injecting into the spray stream. Do not mix this concentrated product with the undiluted concentrate
of other products for use in injection systems, unless otherwise directed.
8.7 Controlled Droplet Applicator (CDA)
The amount of this product applied per acre using a controlled droplet applicator (CDA) must be no less
than the rate specified on this label for application using conventional broadcast application equipment.
A controlled droplet applicator produces a spray pattern that is not easily visible. Use extreme care to avoid
spray or drift from contacting the foliage or any other green tissue of desirable vegetation, as plant damage
or destruction could result.
9.0 ANNUAL AND PERENNIAL CROPS
THIS SECTION PROVIDES DIRECTIONS FOR USE OF THIS PRODUCT THAT APPLY TO ALL CROPS
LISTED IN THE FOLLOWING SECTIONS. SEE THE INDIVIDUAL CROP SECTIONS FOR SPECIFIC USE
INSTRUCTIONS, PREHARVEST INTERVALS, AND ADDITIONAL PRECAUTIONS AND
RESTRICTIONS.
[Optional label text to be used only if Roundup Ready crops are included on the final printed label: See the
“ROUNDUP READY AND OTHER GLYPHOSATE TOLERANT CROPS” section of this label, or separately
published supplemental labeling for this product, for directions for use in Roundup Ready and other
glyphosate-tolerant crops listed on this label.]
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Preplant; At-Planting; Preemergence;
Hooded Sprayer in Row Middles; Shielded Sprayer in Row Middles; Wiper Application in Row Middles;
Post-Harvest

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 28 of 165 Revised June 2021
USE INSTRUCTIONS: This product may be applied durin g fallow intervals preceding planting, prior to
planting or transplanting, at-planting, or preemergence to annual and perennial crops listed on this label,
except where specifically limited. For any crop not listed on this label, application must be made a minimum
of 30 days prior to planting. Unless otherwise directed, apply this product according to the rates listed in
the “ANNUAL WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY BRUSH,
TREES AND VINES RATE SECTION” of this label. Application rates specified on this label for hard-to-
control weeds, or those specified on separate supplemental labeling for this product, supersede the rates
in the “ANNUAL WEEDS RATE SECTION,” “PERENNIAL WEEDS RATE SECTION” and “WOODY
BRUSH, TREES AND VINES RATE SECTION” of this label. Additional information on hard-to-control
weeds can be found on Fact Sheets published for this product.
Application of this product may be repeated as needed up to a maximum of 5 quarts per acre per year.
Refer to specific use sections of this label for additional information on minimum intervals required before
re-application of this product.
Hooded and shielded sprayers and wiper applicators capable of preventing all contact of the herbicide
solution with the crop may be used in mulched or unmulched row middles after crop establishment. Wiper
applicators may be used over the top of crops to control tall weeds only when specifically directed in the
individual crop sections that follow. Crop injury is possible with these methods of application. Refer to the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label for information regarding the
potential for crop injury using selective application equipment.
Spot application of this product for weed control in a cropping system may be made only when specifically
directed in the individual crop sections that follow.
Unless otherwise prohibited, all applications of this product described in the sections that follow may be
made using aerial application equipment where appropriate, provided that the applicator complies with the
precautions and restrictions specified on this label and on all supplemental labeling published for this
product. Refer to the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label for information
on aerial application and procedures for avoiding spray drift that could cause injury to any vegetation not
intended for application. Use of appropriate buffers will help prevent injury to adjacent vegetation.
TANK MIXTURES: This product may be tank-mixed with other herbicides to provide residual weed control,
a broader weed control spectrum or an alternate mechanism of action. Always read and follow label
directions for all products in the tank mixture. It is the responsibility of the pesticide user to ensure that the
intended use is included on the label of all products added to a tank mixture. Use all products according to
rates and timing specified on the label. Some tank-mix products have the potential to cause crop injury.
Read the label for all products in the tank mixture prior to use to determine the potential for crop injury.
Always predetermine the compatibility of tank-mix products together in the carrier by mixing small
proportional quantities in advance. Mixing other products with this herbicide in the spray tank can cause
incompatibility, antagonism, or a reduction in the efficacy of this product. Bayer CropScience has not tested
all product formulations for compatibility or performance in a tank-mix with this product. To the extent
consistent with applicable law, buyer and all users are responsible for any and all loss or damage in
connection with the use or handling of mixtures of this product with herbicides or other materials. See the
“MIXING” section of this label for more information on tank mixtures.
PRECAUTIONS: Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed roots
(including those emerging from plastic mulch), or fruit of crops, as severe crop injury or destruction could
result. Transplant seedlings coming into contact with weeds that are still wet with a spray solution of this
product could result in significant crop injury. When making preemergence applications, application must
be made before crop emergence to avoid severe crop injury. Broadcast application of this product at
emergence will result in injury or death of emerged seedlings. Apply before seed germination in coarse
sandy soils to further minimize the risk of crop injury. In crops where spot application is allowed, the crop
sprayed with this product will be killed along with the weeds. Take care not to spray or allow spray to drift

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 29 of 165 Revised June 2021
outside the target area in order to avoid unwanted crop destruction. See the “APPLICATION EQUIPMENT
AND TECHNIQUES” section of this label for additional information.
Preharvest application on crops grown for seed could result in a reduction in germination or vigor. To the
extent consistent with applicable law, buyer and all users are responsible for such loss or damage in
connection with the preharvest use of this product on any crop grown for seed.
RESTRICTIONS: Before using this product, read and follow the Maximum Application Rate information in
“PRODUCT INFORMATION” section of this label. Observe these and all other maximum application rates
stated throughout this label. Maximum application rates apply to the use of this product combined with the
use of any and all other herbicides containing glyphosate as the active ingredient, whether applied
separately or as mixtures. Calculate the application rates (glyphosate acid equivalents) and ensure that the
total use of this and other glyphosate-containing products does not exceed the stated maximum rate.
Unless otherwise directed for an individual crop listed in this section of this label, the maximum single
application rate of this product using ground application equipment is 3.125 quarts (100 fluid ounces; 3.75
pounds glyphosate acid equivalent) per acre and 40 fluid ounces (1.50 pounds glyphosate acid equivalent)
per acre using aerial application equipment. For Preplant applications prior to planting crops listed in this
section, do not exceed an application rate of 3.125 quarts (100 fluid ounces; 3.75 pounds glyphosate acid
equivalent) per acre or the maximum Preplant application rate stated on this label for a specific crop within
30 days of planting. Post-harvest and fallow applications of this product must be made a minimum of 30
days prior to the planting of any crop not listed on this label.
Unless otherwise directed for an individual crop listed in this section of this label, multiple applications of
this product may be made up to the maximum amount of this product that may be applied. Allow a minimum
of 14 days and a significant amount of vegetation regrowth between applications.
Do not exceed a combined total application of 5 quarts of this product (6 pounds glyphosate acid equivalent)
per acre per year.
Unless otherwise directed on this label, application using selective equipment, including wiper applicators
and hooded sprayers, must be made a minimum of 14 days prior to harvest.
Do not harvest or feed vegetation from an area for 8 weeks following broadcast postemergence application,
unless otherwise directed.
In crops where spot application is allowed, do not apply this product to more than 10 percent of the total
field to be harvested, unless otherwise directed.
When applying this product as a tank mixture with one or more products, refer to each individual tank-mix
product label for restrictions and apply the mixture in accordance with the most restrictive statements for
each product in the tank.
9.1 Cereal and Grain Crops
LABELED CROPS: Barley; Buckwheat; Millet (pearl, proso); Oats; Rice; Rye; Quinoa; Teff; Teosinte;
Triticale; Wheat (all types); Wild Rice
TYPES OF APPLICATION: Those listed in Section 9.0, plus Red Rice Control Prior to Planting Rice; Spot
Treatment (except rice); Control of Barnyardgrass in Rice Using Renovation Treatment (California only);
Wiper Applicator (feed barley and wheat only); Preharvest (feed barley and wheat only)
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after the planting of cereal crops, but
prior to crop emergence.
Red Rice Control Prior to Planting Rice

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 30 of 165 Revised June 2021
USE INSTRUCTIONS: Flush fields prior to application to obtain uniform germination and stand of red rice
and then apply 30 fluid ounces of this product in 5 to 10 gallons of water per acre when the majority of the
red rice plants are at the 2-leaf stage and no more than 4 inches tall. Red rice plants with less than 2 true
leaves might only be partially controlled. Avoid spraying during conditions of low humidity, as reduced
control of red rice could result.
RESTRICTIONS: Do not apply this product to rice fields or levees when fields contain floodwater. Do not
flood fields for a minimum of 8 days following application.
Spot Application (Except Rice)
USE INSTRUCTIONS: This product may be applied as a spot application in cereal crops, except rice. Apply
before heading in small grains.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total field area to be harvested.
Control of Barnyardgrass in Rice Using Renovation Treatment (California Only)
THIS APPLICATION FOR USE IN CALIFORNIA ONLY
USE INSTRUCTIONS: This product may be applied as a renovation treatment in rice crops to control
barnyardgrass ( Echinochola crus-galli ) infestations using ground broadcast application equipment or a
handheld sprayer. Renovation is defined as an herbicide application that will result in crop and weed
destruction in an entire field or contiguous area within a field.
RESTRICTIONS: Rice straw and stubble from the application area plus an additional 25 feet on all sides
of the area may not be used for animal bedding, grazing, or any other feed purpose. DO NOT make this
application using aerial application equipment.
Wiper Application (Wheat and Feed Barley Only)
USE INSTRUCTIONS: This product may be applied over the top of wheat and feed barley using a wiper
applicator to control tall weeds. To control common rye or cereal rye, apply after weeds have headed and
achieved maximum growth. See additional instructions on the use of wiper applicators in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 35 days between application and harvest. Do not use roller
applicator.
Preharvest (Wheat and Feed Barley Only)
USE INSTRUCTIONS: This product provides weed control when applied prior to harvest of wheat and feed
barley. Apply up to 22 fluid ounces of this product in 10 to 20 gallons of water per acre when using ground
application equipment and in 3 to 10 gallons of water per acre when using aerial application equipment.
For wheat, apply after the hard-dough stage when grain moisture is 30 percent or less. For feed barley,
make application after the hard-dough stage when grain moisture is 20 percent or less. Stubble may be
grazed immediately after harvest.
RESTRICTIONS: Do not apply more than 20 fluid ounces of this product per acre for preharvest application.
Allow a minimum of 7 days between application and harvest or grazing.
Post-Harvest
USE INSTRUCTIONS: This product may be applied up to 3.125 quarts per acre as a single ground
broadcast application for weed control after harvest of cereal crops. Higher application rates might be
needed to control large weeds that were growing in the field at the time of harvest. Tank mixtures with 2,4-
D or dicamba may be used. Ensure that the product used is labeled for weed control following harvest of
cereal crops. Read and follow label directions for all products in the tank mixture.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 31 of 165 Revised June 2021
RESTRICTIONS: Do not exceed a total combined application rate of 5 quarts of this per acre per year.
Allow a minimum of 7 days between application and harvest or feeding of vegetation within the application
area. Application must be made a minimum of 30 days prior to the planting of any crop not listed on this
label.
9.2 Corn
TYPES OF CORN: Field corn; Popcorn; Seed corn; Silage corn; Sweet corn
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application; Preharvest
[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with field corn hybrids with Roundup Ready 2 Technology (including Roundup Ready
Corn 2 and field corn products displaying the Roundup Ready 2 Technology logo), with sweet corn hybrids
with Roundup Ready 2 Technology (including Roundup Ready Sweet Corn and sweet corn products
displaying the Roundup Ready 2 Technology logo), and field corn hybrids with Agrisure GT Technology
see the “ROUNDUP READY AND OTHER GLYPHOSATE TOLERANT CROPS” section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix before, during or after planting
corn, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application prior to the planting or the emergence of the type of corn being grown. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix. Apply these
tank mixtures in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen solution per acre. [ Optional text,
only required if the product information is not included in the list below: For more information on the products
listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr;
dimethenamid; dimethenamid-P; flufenacet; flumetsulam; flumiclorac pentyl ester; fluthiacet-
methyl; isoxaflutole; linuron; mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; rimsulfuron; saflufenacil; tembotrione; thiencarbazone-methyl
Axiom DF (EPA Reg. No. 264-766; metribuzin, flufenacet); Balance Flexx (EPA Reg. No. 264-
1067; isoxaflutole); Capreno (EPA Reg. No. 264-1063; tembotrione, thiencarbazone-methyl );
Corvus (EPA Reg. No. 264-1066; isoxaflutole, thiencarbazone-methyl); Degree Xtra (EPA Reg.
No. 524-511; acetochlor, atrazine ); DiFlexx (EPA Reg. No. 264-1173; dicamba); DiFlexx DUO
(EPA Reg. No. 264-1184; dicamba, tembotrione); Harness (EPA Reg. No. 524-473; acetochlor);
Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine); Harness Xtra 5.6L (EPA Reg. No.
524-485; acetochlor, atrazine); Harness MAX (EPA Reg. No. 524-636; acetochlor, mesotrione);
TripleFLEX II (EPA Reg. No. 524-614; acetochlor, clopyralid, flumetsulam)
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Anthem; Anthem Maxx; Anthem Flex; Anthem
ATZ; Aim EC; Aim EW; Axiom DF; Balance Flexx; Banvel; Banvel 480; Bicep II MAGNUM; Bicep
II MAGNUM FC; Bicep Lite II MAGNUM; Callisto; Capreno; Cinch; Cinch ATZ; Cinch ATZ Lite;
Clarity; Corvus; Degree Xtra; DiFlexx; DiFlexx DUO; Distinct; Dual MAGNUM; Dual II MAGNUM;
FulTime; FulTime NXT; Guardsman MAX; Harness; Harness Xtra; Harness Xtra 5.6L; Harness
MAX; Hornet WDG Broadleaf Blend; Keystone; Keystone LA; Keystone LA NXT; Keystone NXT;
Leadoff; Linex 4L; Lorox DF; Marksman; Me-Too-Lachlor II; Outlook; Prowl 3.3 EC; Prowl H2O;

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 32 of 165 Revised June 2021
Python WDG; Resicore; Resolve DF; Resolve Q; Resolve SG; Resource; Shark EW; Shark H2O;
Sharpen Powered by Kixor;Stalwart; Stalwart C; Stalwart Xtra; Surpass EC; Surpass NXT;
TopNotch; TripleFLEX II; Verdict powered by Kixor; Zidua
For hard-to-control annual weeds such as fall panicum, barnyardgrass, crabgrass, shattercane and
broadleaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply 20 fluid
ounces of this product per acre in these tank mixtures. For other annual weeds listed on this label, apply
15 to 20 fluid ounces of this product per acre when weeds are less than 6 inches tall and 20 to 30 fluid
ounces per acre when weeds are over 6 inches tall. When using a nitrogen solution as the carrier, higher
application rates might be needed for acceptable weed control.
RESTRICTIONS: Application of 2,4-D or dicamba must be made a minimum of 7 days prior to planting
corn.
In Southern states, do not mix this product in nitrogen solutions for application to hard-to-control grasses,
such as barnyardgrass, fall panicum, broadleaf signalgrass, annual ryegrass and any perennial weeds.
This area includes Illinois and Indiana south of Route 50, Alabama, Arkansas, Delaware, Florida, Georgia,
Kentucky, Louisiana, Maryland, Mississippi, New Jersey, North Carolina, Oklahoma, South Carolina,
Tennessee, Texas, Virginia and West Virginia.
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for weed control in between
rows of corn. Only hooded sprayers that completely enclose the spray pattern may be used. See additional
instructions on the use of hooded sprayers in the “APPLICATION EQUIPMENT AND TECHNIQUES”
section of this label.
RESTRICTIONS: Corn must be at least 12 inches tall, measured without extending leaves. Do not apply
more than 20 fluid ounces of this product per acre for each hooded sprayer application and no more than
60 fluid ounces per acre per year total.
Spot Application
USE INSTRUCTIONS: This product may be applied as a spot application prior to silking of corn.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total field area to be harvested.
Preharvest
USE INSTRUCTIONS: Up to 60 fluid ounces of this pr oduct per acre may be applied just prior to corn
harvest using ground application equipment, or up to 40 fluid ounces per acre using aerial application
equipment, when kernel-fill is complete and the corn is physiologically mature (black layer formed) and
grain moisture is 35 percent or less.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Post-Harvest
USE INSTRUCTIONS: This product may be applied up to 3.125 quarts per acre as a single ground
broadcast application for weed control after harvest of corn. Higher rates might be needed to control large
weeds that were growing in the field at the time of harvest. Tank mixtures with 2,4-D or dicamba may be
used. Ensure that the product used is labeled for post-harvest application in corn. Read and follow label
directions for all products in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest or feeding of vegetation
within the application area. Application of this product must be made a minimum of 30 days prior to planting
any crop not listed on this label. Do not exceed a total combined application rate of 5 quarts of this product
per acre per year.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 33 of 165 Revised June 2021
9.3 Cotton
TYPES OF APPLICATION: Those listed in Section 9.0, plus Selective Equipment Application; Spot
Application; Preharvest
[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with cotton with Roundup Ready Technology, cotton with Roundup Ready Flex
Technology, and cotton with GlyTol Technology, see the “ROUNDUP READY AND OTHER
GLYPHOSATE-TOLERANT CROPS” section of this label.]
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton, but prior to crop
emergence.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may also be tank-mixed with products containing one or more of the active ingredients
listed below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence.
Ensure that the product used is labeled for application prior to planting or the emergence of cotton. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products used in the tank mixture. Users
must follow the most restrictive directions for use and precautionary statements of each product in the tank
mixture. Apply these tank mixtures in 10 to 20 gallons of water per acre. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen; metolachlor; s-metolachlor;
norflurazon; pendimethalin; prometyrn; pyrithiobac-sodium; saflufenacil
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Direx 4L; Dual MAGNUM; Dual II MAGNUM;
Karmex DF; Prowl 3.3 EC; Prowl H2O; Reflex; Sharpen Powered by Kixor; Stalwart; Staple LX;
Valor SX; Warrant; Warrant Ultra]
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied using a hooded or shielded sprayer, or over the top of
cotton using a wiper applicator to control tall weeds. See additional instructions on the use of this selective
equipment in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Spot Application
USE INSTRUCTIONS: This product may be applied as a spot application to targeted weeds in cotton prior
to boll opening.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total field area to be harvested.
Preharvest
USE INSTRUCTIONS: This product provides weed control and cotton re-growth inhibition when applied
prior to harvest. For weed control, apply at rates given in the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label. For cotton re-growth inhibition, apply 15 to 40 fluid

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 34 of 165 Revised June 2021
ounces of this product per acre. Make preharvest application only after sufficient bolls have developed to
produce the desired yield. Application made prior to this time could affect maximum yield potential.
TANK MIXTURES: This product may be tank-mixed with DEF 6 (EPA Reg. No. 264-730; tribufos), Folex 6
EC (EPA Reg. No. 5481-504; tribufos), or Ginstar EC (EPA Reg. No. 264-634; thidiazuron, diuron ), to
enhance cotton leaf-drop. Read and follow label directions for all products used in the tank mixture.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest. DO NOT ADD ADDITIONAL
SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR PREHARVEST
APPLICATION TO COTTON.
9.4 Fallow Systems
This product may be applied during the fallow period prior to planting or emergence of any crop listed on
this label. Application must be made a minimum of 30 days prior to the planting of any crop not listed on
this label.
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Aid-to-Tillage
Chemical Fallow
USE INSTRUCTIONS: This product may be used as a substitute for tillage to control annual weeds in fallow
fields. Broadcast or spot application will also control or suppress many perennial weeds in fallow fields.
Tank-mix this product with 2,4-D or dicamba for a broader weed control spectrum. Application of up to 40
fluid ounces of this product per acre may be made onto fallow fields using aerial application equipment
where there is sufficient buffer to prevent injury due to drift onto adjacent crops.
PRECAUTIONS: Some crop injury could occur if dicamba is applied within 45 days of planting.
Preplant Fallow Beds
USE INSTRUCTIONS: This product will control weed s listed in the “ANNUAL WEEDS RATE SECTION,”
“PERENNIAL WEEDS RATE SECTION” and “WOODY BRUSH, TREES AND VINES RATE SECTION” of
this label prior to planting.
TANK MIXTURES: Apply 8 fluid ounces of this product per acre in a tank-mix with an appropriate rate of
Goal 2XL (EPA Reg. No. 62719-424; oxyfluorfen) to control the following weeds up to the maximum height
or length indicated: 3 inches for common cheeseweed, chickweed, groundsel; 6 inches for London rocket,
shepherd’s-purse.
Apply 10 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Goal 2XL to control
the following weeds up to the maximum height or length indicated: 6 inches for common cheeseweed,
groundsel, marestail (Conyza canadensis); 12 inches for chickweed, London rocket, shepherd’s-purse.
Aid-to-Tillage
USE INSTRUCTIONS: This product may be used in conjunction with tillage practices in fallow systems, or
prior to the planting of crops listed on this label (preplant), to control downy brome, cheat, volunteer wheat,
tansy mustard and foxtail. Apply 8 fluid ounces of this product in 3 to 10 gallons of water per acre before
weeds are 6 inches in height. Application must be followed by conventional tillage no later than 15 days
after application and before re-growth occurs. Allow a minimum of 1 day after application before tillage.
PRECAUTIONS: Tank mixtures with residual herbicides could result in reduced performance of this
product.
9.5 Grain Sorghum (Milo)
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application; Wiper Application;
Preharvest

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 35 of 165 Revised June 2021
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting grain sorghum, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [ Optional text:, or one or more of the products listed,] and applied prior to crop
emergence. Ensure that the product used is labeled for application prior to planting or emergence of grain
sorghum. It is the responsibility of the pesticide user to ensure that the intended use is included on the label
of all products added to a tank mixture. Read and follow label directions for all products used in the mix.
Users must follow the most restrictive directions for use and precautionary statements of each product in
the tank mixture. Apply these tank mixtures in 10 to 20 gallons of water or 10 to 60 gallons of nitrogen
solution per acre. [Optional text, only required if the product information is not included in the list below: For
more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of
this label.]
[Active ingredients and products to be added to the final printed label for tank-mixing may be
selected from the following list:
acetochlor; atrazine; metolachlor; s-metolachlor; saflufenacil
Warrant (EPA Reg. No. 524-591; acetochlor)
Bicep II MAGNUM; Bicep II MAGNUM FC; Bicep Lite II MAGNUM; Degree Xtra; Dual MAGNUM;
Dual II MAGNUM; Sharpen Powered by Kixor; Warrant]
For hard-to-control annual weeds, such as fall panicum, barnyardgrass, crabgrass, shattercane and
broadleaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply 20 fluid
ounces of this product per acre in a tank mixture with one or more of the products listed here.
For control of other annual weeds listed on this label, apply 15 to 20 fluid ounces of this product per acre
when weeds are less than 6 inches tall and 20 to 30 fluid ounces per acre when weeds are over 6 inches
tall. When using a nitrogen solution as the carrier, the application rate might need to be increased to achieve
acceptable weed control.
Spot Application, Wiper Application
USE INSTRUCTIONS: This product may be applied as a targeted spot application in grain sorghum before
heading. This product may also be applied over the top of grain sorghum using a wiper applicator to control
or suppress tall weeds growing above the crop canopy. See additional instructions on the use of wiper
applicators in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: For spot application, do not apply this product to more than 10 percent of the total field
area to be harvested. When applied using a wiper applicator, allow a minimum of 40 days between
application and harvest. Do not use a roller applicator. Do not feed or graze grain sorghum fodder or ensile
vegetation collected from within the application area.
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied using a hooded sprayer for weed control in between
rows of grain sorghum. Make application before grain sorghum sends tillers between the drill rows. If tillers
are sprayed with this herbicide, the main plant could be damaged or destroyed. Contact of this product in
any manner with any vegetation to which application is not intended could cause damage. Only hooded
sprayers that completely enclose the spray pattern may be used. See additional instructions on the use of
hooded sprayers in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 36 of 165 Revised June 2021
RESTRICTIONS: Grain sorghum must be at least 12 inches tall, measured without extending leaves. Do
not graze or feed grain sorghum forage or fodder following application of this product using a hooded
sprayer. Do not apply more than 20 fluid ounces of this product per acre per hooded sprayer application
and no more than 60 fluid ounces per acre per year total.
Preharvest
USE INSTRUCTIONS: Up to 40 fluid ounces of this product per acre may be applied after sorghum grain
has reached 30 percent moisture or less. As with other herbicides that cause sudden plant death, avoid
preharvest application of this product on grain sorghum (milo) infected with charcoal rot as lodging can
occur.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest of grain sorghum. Preharvest
application of this product on grain sorghum (milo) is not registered for use in California.
Post-Harvest
USE INSTRUCTIONS: This product may be applied up to 3.125 quarts per acre for weed control after
harvest of grain sorghum. Higher application rates might be needed to control large weeds that were
growing in the field at the time of harvest. Tank mixtures with 2,4-D or dicamba may be used. Ensure that
the product used is labeled for post-harvest application in grain sorghum (milo). Read and follow label
directions for all products in the tank mixture.
This product may be applied to grain sorghum stubble following harvest to control or suppress re-growth.
Apply 20 fluid ounces of this product per acre for control or 15 fluid ounces per acre for suppression.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest or feeding of vegetation
within the application area. Application must be made a minimum of 30 days prior to the planting of any
crop not listed on this label. Do not exceed a total combined application rate of 5 quarts of this product per
acre per year.
9.6 Herbs and Spices
LABELED CROPS: Allspice; Angelica; Star anise; Annatto (seed); Balm; Basil; Borage; Burnet; Camomile;
Caper buds; Caraway; Black caraway; Cardamom; Cassia bark; Cassia buds; Catnip; Celery seed; Chervil
(dried); Chive; Chinese chive; Cinnamon; Clary; Clove buds; Coriander leaf (cilantro or Chinese parsley);
Coriander seed (cilantro); Costmary; Culantro (leaf); Culantro (seed); Cumin; Curry (leaf); Dill (dillweed);
Dill (seed); Epazote; Fennel seed (common and Florence); Fenugreek; White ginger flower; Grains of
paradise; Horehound; Hyssop; Juniper berry; Lavender; Lemongrass; Lovage (leaf and seed); Mace;
Marigold; Marjoram (including oregano); Mexican oregano; Mioga flower; Mustard (seed); Nasturtium;
Nutmeg; Parsley (dried); Pennyroyal; Pepper (black and white); Pepper leaves; Peppermint; Perilla; Poppy
(seed); Rosemary; Rue; Saffron; Sage; Savory (summer and winter); Spearmint; Stevia leaves; Sweet bay;
Tansy; Tarragon; Thyme; Vanilla; Wintergreen; Woodruff; Wormwood
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application (peppermint, spearmint);
Wiper Application (peppermint, spearmint)
PRECAUTIONS: This product could cause crop injury when applied prior to transplanting or direct-seeding
crops into plastic mulch. Remove residual product from the plastic prior to planting with a single 0.5-inch
application of water, either by natural rainfall or by irrigation. Ensure that the wash water flushes off the
plastic mulch and does not enter the transplant holes. Application made at crop emergence will result in
injury or death of emerged seedlings.
Spot Application, Wiper Application (Peppermint and Spearmint Only)
USE INSTRUCTIONS: This product may be applied as a targeted spot application in peppermint and
spearmint or over the top of peppermint and spearmint using a wiper applicator to control tall weeds.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 37 of 165 Revised June 2021
Application may be repeated in the same area at 30-day intervals. See additional instructions on the use of
wiper applicators in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest. For spot application, do not
apply this product to more than 10 percent of the total field area to be harvested.
9.7 Oilseed Crops
LABELED CROPS: Borage; Buffalo gourd; Calendula; Canola; Castor oil plant; Chinese tallowtree;
Crambe; Cuphea; Echium; Euphorbia; Evening primrose; Flax; Gold of pleasure; Hare’s ear mustard;
Jojoba; Lesquerella; Meadowfoam; Milkweed; Mustard; Niger seed; Oil radish; Poppy; Rape; Rose hip;
Safflower; Sesame; Stokes aster; Sunflower; Sweet rocket; Tallowwood; Tea oil plant; Vernonia
[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with canola with Roundup Ready Technology and canola with TruFlex Technology, see
the “ROUNDUP READY AND OTHER GLYPHOSATE TOLERANT CROPS” section of this label.
TYPES OF APPLICATION: Those listed in Section 9.0, plus Preharvest (except buffalo gourd)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product for use in
safflower, sunflower and all other oilseed crops listed in this section, if a preharvest application is to be
made. If a preharvest application is NOT to be made, the maximum application rate of this product for all
preemergence, selective equipment and post-harvest applications in any oilseed crop listed in this section
is limited only by the maximum of 5 quarts per acre per year. If a preharvest application is intended to be
made to any crop listed in this section, except buffalo gourd, the maximum combined total of all
preemergence and selective equipment applications is limited as indicated in the following table. See the
“PRODUCT INFORMATION” section of this label for more information on Maximum Application Rates.
Maximum Application Rates if a Preharvest Application is Made
Safflower
Combined total for all Preemergence and Selective Equipment
applications 60 fluid ounces per acre
Preharvest application 60 fluid ounces per acre
Sunflower
Combined total for all Preemergence and Selective Equipment
applications 20 fluid ounces per acre
Preharvest application 20 fluid ounces per acre
All Other Oilseed Crops Listed (Except Buffalo Gourd)
Combined total for all Preemergence and Selective Equipment
applications 40 fluid ounces per acre
Preharvest application 30 fluid ounces per acre
RESTRICTIONS: Do not exceed a total application rate of 5 quarts of this product per acre per year.
Preharvest application is not permitted on buffalo gourd.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting oilseed crops listed in
this section, but must be applied prior to crop emergence. Observe the maximum application rates listed at
the beginning of this section.
TANK MIXTURES: For sunflower, a tank mixture with pendimethalin may be applied before, during or after
planting into conventionally tilled soil, a cover crop, established sod or previous crop residue.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 38 of 165 Revised June 2021
RESTRICTIONS: See the use instructions at the beginning of this section for important information on
maximum application rates for preemergence and selective equipment applications of this product.
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied using a wiper applicator or shielded sprayer between
crop rows once the crop is established. Observe the maximum application rates listed at the beginning of
this section. See additional instructions on the use of wiper applicators and hooded sprayers in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
Preharvest (Except Buffalo Gourd)
USE INSTRUCTIONS: This product provides weed control and serves as a harvest aid when applied to a
physiologically mature oilseed crop listed in this section. For safflower, up to 60 fluid ounces of this product
may be applied per acre when seed has lost its opaque character, approximately 20 to 30 days after the
end of flowering of the secondary branches. For sunflower, up to 20 fluid ounces of this product per acre
may be applied when the backsides of sunflower heads are yellow and bracts are turning brown, and seed
moisture content is less than 35 percent. For all other oilseed crops listed in this section (except buffalo
gourd), up to 30 fluid ounces of this product per acre may be applied prior to harvest.
RESTRICTIONS: DO NOT MAKE A PREHARVEST APPLICATION if you have exceeded the maximum
application rates for the combined total of all preemergence and selective equipment applications listed in
the table at the beginning of this section. Make only 1 preharvest application of this product and allow a
minimum of 7 days between application and harvest or feeding to livestock. Application must be made a
minimum of 30 days prior to the planting of any crop not listed on this label. Preharvest application is not
allowed on buffalo gourd or on canola with Roundup Ready Technology, canola with TruFlex Technology
or other listed glyphosate-tolerant canola crops.
Post-Harvest
USE INSTRUCTIONS: This product may be applied at up to 3.125 quarts per acre for weed control after
harvest of oilseed crops. Higher application rates might be needed for control of large weeds that were
growing in the field at the time of harvest. Tank mixtures with 2,4-D or dicamba may be used. Ensure that
the product used is labeled for post-harvest application in the crop harvested. Read and follow label
directions for all products in the tank mixture.
RESTRICTIONS: Do not exceed a total application rate of 5 quarts of this product per acre per year. Allow
a minimum of 7 days between application of this product and harvest or feeding of vegetation within the
application area. Application must be made a minimum of 30 days prior to the planting of any crop not
listed on this label.
9.8 Soybean
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application; Selective Equipment
Application; Preharvest
[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with soybean with Roundup Ready Technology, soybean with Roundup Ready 2 Yield
Technology, soybean with GT27 Technology and soybean with Enlist E3 Technology, see the “ROUNDUP
READY AND OTHER GLYPHOSATE TOLERANT CROPS section of this label.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied at up to 3.125 quarts per acre alone or in a tank mixture
before, during or after planting soybean, but prior to crop emergence.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may also be tank-mixed with products containing one or more of the active ingredients

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 39 of 165 Revised June 2021
listed below [ Optional text: , or one or more of the products listed,] and applied prior to planting or the
emergence of soybean. Ensure that the product used is labeled for application prior to planting or the
emergence of soybean. It is the responsibility of the pesticide user to ensure that the intended use is
included on the label of all products added to the mix. Read and follow label directions for all products
added to the mix. Users must follow the most restrictive directions for use and precautionary statements of
each product in the tank mixture. Apply these tank mixtures in 10 to 20 gallons of water per acre. [Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]

[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone; cloransulam-methyl;
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl
ester; flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron;
metolachlor; s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin
 Axiom DF (EPA Reg. No. 264-766; metribuzin, flufenacet ); Warrant (EPA Reg. No. 524-591;
acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor, fomesafen)
Aim EC; Aim EW; Anthem; Anthem Maxx; Anthem Flex; Assure II; Authority Assist; Authority Elite;
Authority First DF; Authority MAXX; Authority MTZ DF; Authority Supreme; Authority XL; Axiom
DF; Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX; Classic; Cobra;
Command 3ME; Dual MAGNUM; Dual II MAGNUM; Enlite; Envive; Fierce; Fierce MTZ; Fierce XLT;
FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF; Mauler; Me-Too-Lachlor; Optill Powered by Kixor;
Outlook; Phoenix; Prefix; Prowl 3.3 EC; Prowl H2O; Pursuit; Python WDG; Reflex; Resource;
Select 2 EC; Select Max Herbicide with Inside Technology; Sharpen Powered by Kixor; Spartan
4F; Sonic; Treflan 4L; Treflan 4 EC; TriCor 4F; TriCor DF; Valor SX; Valor XLT; Verdict powered
by Kixor; Warrant; Warrant Ultra; Zidua; Zidua SC; Zidua PRO Powered by Kixor]
For hard-to-control annual weeds, such as fall panicum, barnyardgrass, crabgrass, shattercane and
broadleaf signalgrass up to 2 inches tall, and Pennsylvania smartweed up to 6 inches tall, apply 20 fluid
ounces of this product per acre in a tank mixture with one of the products listed. For other annual weeds
listed on this label, apply 15 to 20 fluid ounces of this product per acre when weeds are less than 6 inches
tall and 20 to 30 fluid ounces per acre when weeds are over 6 inches tall.
Spot Application
USE INSTRUCTIONS: This product may be applied as a spot treatment prior to initial pod set in soybean.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total field area to be harvested.
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied in soybean using a shielded applicator, hooded
sprayer, wiper applicator or sponge bar. See additional instructions on the use of selective equipment in
the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest.
Preharvest
USE INSTRUCTIONS: This product may be applied to soybean prior to harvest after pods have set and
lost all green color. Apply at rates given in the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 40 of 165 Revised June 2021
WEEDS RATE SECTION” of this label. Take care to avoid excessive seed shatter loss due to ground
application equipment.
RESTRICTIONS: Do not apply more than 3.125 quarts of this product per acre for preharvest application
using ground application equipment or more than 40 fluid ounces per acre when using aerial application
equipment. Allow a minimum of 7 days between application and harvest of soybean. If the preharvest
application rate is greater than 20 fluid ounces per acre, do not graze or harvest hay or fodder within the
application area for livestock feed within 25 days of application. If the application rate is 20 fluid ounces per
acre or less, the grazing restriction is reduced to 14 days after application.
9.9 Sugarcane
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied in or around sugarcane fields, or in fields prior to the
emergence of plant cane.
RESTRICTIONS: Do not apply to vegetation in or around ditches, canals or ponds containing water to be
used for irrigation.
Spot Application
USE INSTRUCTIONS: This product may be applied as a spot application in sugarcane. For control of
volunteer or diseased sugarcane, apply a 1-percent solution of this product in water using a handheld
sprayer and a spray-to-wet technique. Better control of volunteer or diseased sugarcane can be obtained
when this product is applied when there are at least 7 new leaves on the targeted cane. Avoid contact of
this herbicide with healthy sugarcane plants as severe damage or destruction could result.
RESTRICTIONS: Do not feed or graze sugarcane foliage within the application area.
Selective Equipment Application
USE INSTRUCTIONS: This product may be applied usi ng a hooded sprayer for weed control in between
rows of sugarcane. See additional instructions on the use of hooded sprayers in the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label.
PRECAUTIONS: Do not allow weeds within the application area to come into contact with the crop.
Fallow Application
USE INSTRUCTIONS: This product may be used as a replac ement for tillage in fields that are lying fallow
between sugarcane crops. This product may also be used to remove the last stubble of ratoon cane by
applying 2.5 to 3.125 quarts of this product in 10 to 40 gallons of water per acre to new growth having at
least 7 new leaves. Allow a minimum of 7 days after application before tillage. Aerial application of up to 60
fluid ounces per acre may be made onto fallow sites where there is sufficient buffer to prevent drift onto
adjacent crops. Tank mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled
for this application in sugarcane. Read and follow label directions for all products in the tank mixture.
9.9.1 Sugarcane Ripening
USE INSTRUCTIONS: This product may be used as a foliar-applied plant growth regulator to hasten
ripening and extend the period of high sucrose level in both low- and high-tonnage sugarcane. Most
of the sucrose increase is concentrated in the top nodes of the cane stalk. To maximize sugar recovery
where topping is practiced at harvest, top at the base of the fourth leaf. Consult your state sugarcane
authority or local Bayer CropScience representative regarding the degree of sucrose response that can
be anticipated prior to application of this product.
As a result of leaf desiccation, improved trash burn can be expected.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 41 of 165 Revised June 2021
Apply this product at the following rates and timing according to the State in which the sugarcane is
grown. Use a higher application rate within the given range when applying to sugarcane under adverse
ripening conditions or to less responsive varieties.
FLORIDA – Apply 4 to 10 fluid ounces of this product per acre 3 to 5 weeks before harvest of LAST
RATOON CANE ONLY.
HAWAII – Apply 8 to 18 fluid ounces of this product per acre 4 to 10 weeks before harvest.
LOUISIANA – Apply 4 to 10 fluid ounces of this product per acre 3 to 7 weeks before harvest of
RATOON CANE ONLY.
PUERTO RICO – Apply 4 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON
CANE ONLY.
TEXAS – Apply 4 to 10 fluid ounces of this product per acre 3 to 5 weeks before harvest of RATOON
CANE ONLY.
PRECAUTIONS: Application of this product could init iate development of shooting eyes. This product
might not increase the sucrose content of sugarcane under conditions of good natural ripening. Within
2 to 3 weeks after application, this product could produce a slight yellowing to a pronounced browning
and drying of leaves, and a shortening of upper internodes. Spindle death could occur.
Rainfall within 6 hours after application could reduce the effectiveness of this product.
Application to sugarcane grown for seed could result in a reduction in germination or vigor. To the
extent consistent with applicable law, buyer and all users are responsible for any and all loss or damage
in connection with the preharvest use of this product on sugarcane grown for seed.
RESTRICTIONS: Do not feed or graze sugarcane forage following application.
 Do not plant
subsequent crops within 30 days after application of this product other than the following: alfalfa or
other forage legumes, beans (all types), corn (all types), cotton, melons (all types), pasture grasses,
peanuts, potatoes (Irish or sweet), sorghum (milo), soybean, squash (all types) or wheat.
Do not apply for enhanced ripening to any crops other than sugarcane. Use of this product in any
manner not consistent with this label could result in injury to persons, animals or crops, or have other
unintended consequences.
9.10 Vegetable Crops
THIS SECTION PROVIDES DIRECTIONS FOR USE THAT APPLY TO ALL VEGETABLE CROPS LISTED
IN THE FOLLOWING SECTIONS. SEE THE IN DIVIDUAL CROP SECTIONS FOR SPECIFIC
DIRECTIONS FOR USE, PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS.
TYPES OF APPLICATION: Chemical Fallow; Preplant Fallow Beds; Preplant; At-Planting; Preemergence;
Prior to Transplanting Vegetables; Hooded Sprayer in Row Middles; Shielded Sprayer in Row Middles;
Wiper Application in Row Middles; Directed Application (non-bearing ginseng only); Wiper Application
(carrot, rutabaga, sweet potato); Post-Harvest
PRECAUTIONS: This product could cause crop injury when applied prior to transplanting or direct-seeding
crops into plastic mulch. Remove residual product from the plastic with a single 0.5-inch application of
water, either by natural rainfall or by irrigation, prior to planting. Ensure that the wash water flushes off the
plastic mulch and does not enter the transplant holes. Application of this product at crop emergence will
result in injury or death to emerged seedlings.
Avoid contact of this herbicide with foliage, green shoots or stems, bark, exposed roots (including those
emerging from the plastic mulch), or fruit of crops, as severe crop injury or destruction could result.
Transplanted seedlings coming into contact with weeds that are still wet with a spray solution of this product
could result in significant crop injury.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 42 of 165 Revised June 2021
Preemergence application must be made before the crop emerges from the soil to avoid severe crop injury.
Apply before seed germination in coarse sandy soils to further minimize the risk of crop injury. In crops with
vines, make hooded sprayer, shielded sprayer and wiper applications in row middles prior to vine
development, otherwise severe crop injury or destruction could result.
RESTRICTIONS: Unless otherwise directed, application using selective equipment, including wiper
applicators and hooded sprayers, must be made a minimum of 14 days prior to harvest. Post-harvest and
fallow applications must be made a minimum of 30 days prior to the planting of any crop not listed on this
label. See additional use instructions in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of
this label.
9.10.1 Brassica Vegetables
LABELED CROPS: Broccoli; Chinese broccoli (gai lon); Broccoli raab (rapini); Brussels sprouts;
Cabbage; Chinese cabbage (bok choy); Chinese cabbage (napa); Chinese mustard cabbage (gai
choy); Cauliflower; Cavalo broccolo; Collards; Kale; Kohlrabi; Mizuna; Mustard greens; Mustard
spinach; Rape greens
9.10.2 Bulb Vegetables
LABELED CROPS: All cultivars, varieties and/or hybrids of Chive (including Chinese); Daylily; Elegans
hosta; Fritillaria; Garlic (including great-headed, serpent); Kurrat; Leek (including lady’s, wild); Onion
(including Beltsville bunching, bulb, Chinese, fresh, green, macrostem, pearl, potato, tree, Welsh);
Shallot
9.10.3 Cucurbit Vegetables and Fruits
LABELED CROPS: Chayote (fruit); Chinese waxgourd (Chinese preserving melon); Citron melon;
Cucumber; Gherkin; Edible gourd (includes hyotan, cucuzza, hechima, Chinese okra); Melons (all);
Momordica spp (includes balsam apple, balsam pear, bittermelon, Chinese cucumber); Muskmelon
(includes cantaloupe, casaba, crenshaw melon, golden pershaw melon, honeydew melon, honey ball
melon, mango melon, Persian melon, pineapple melon, Santa Claus melon, snake melon); Pumpkin;
Summer squash (includes crookneck squash, scallop squash, straightneck squash, vegetable marrow,
zucchini); Winter squash (includes butternut squash, calabaza, hubbard squash, acorn squash,
spaghetti squash); Watermelon
RESTRICTIONS: For cantaloupe, casaba melon, crenshaw melon, cucumber, gherkin, gourds,
honeydew melon, honey ball melon, mango melon, melons (all), muskmelon, Persian melon, pumpkin,
squash (summer, winter), and watermelon, allow a minimum of 3 days between application and
planting.
9.10.4 Leafy Vegetables
LABELED CROPS: Amaranth (Chinese spinach); Arugula (roquette); Beet greens; Cardoon; Celery;
Chinese celery; Celtuce; Chaya; Chervil; Edible-leaved chrysanthemum; Garland chrysanthemum;
Corn salad; Cress (garden, upland); Dandelion; Dock (sorrel); Dokudami; Endive (escarole); Florence
fennel; Gow kee; Lettuce (head, leaf); Orach; Parsley; Purslane (garden, winter); Radicchio (red
chicory); Rhubarb; Spinach; New Zealand spinach; Vine spinach; Swiss chard; Watercress (upland);
Water spinach
RESTRICTIONS: For watercress, allow a minimum of 3 days between application and seeding. Do not
apply this product during the period between seeding and emergence.
9.10.5 Fruiting Vegetables
LABELED CROPS: All cultivars, varieties and/or hybrids of Eggplant (including African, pea, scarlet);
Cocona; Garden huckleberry; Goji berry; Groundcherry ( Physalis spp); Martinynia; Naranjilla; Okra;

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 43 of 165 Revised June 2021
Pepino; Pepper (includes bell pepper, chili pepper, cooking pepper, pimento, sweet pepper); Roselle;
Sunberry; Tomatillo; Tomato
RESTRICTIONS: Allow a minimum of 3 days between application and planting. For tomato and
tomatillo, do not apply this product using a hooded or shielded sprayer in row-middles because of the
potential for crop injury.
9.10.6 Legume Vegetables (Succulent or Dried)
LABELED CROPS: Bean ( Lupinus: includes grain lupin, sweet lupin, white lupin, white sweet lupin);
Bean (Phaseolus: includes field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean,
snap bean, tepary bean, wax bean); Bean ( Vigna: includes adzuki bean, asparagus bean, blackeyed
pea, catjang, Chinese longbean, cowpea, crowder pea, moth bean, mung bean, rice bean, southern
pea, urd bean, yardlong bean); Broad bean (fava); Chickpea (garbanzo); Guar; Jackbean; Lablab bean;
Lentil; Pea (Pisum: includes dwarf pea, edible-podded pea, English pea, field pea, garden pea, green
pea, snowpea, sugar snap pea); Pigeon pea; Soybean (immature seed); Sword bean
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application (dry varieties only);
Preharvest (dry varieties only)
Spot Application (Dry Varieties Only)
USE INSTRUCTIONS: This product may be applied as a targeted spot application to control
troublesome weeds such as Canada thistle, quackgrass, mayweed (dog fennel) and milkweed in any
dry legume variety listed in this section, except cowpeas or field (feed) peas. Up to 20 fluid ounces of
this product per acre may be applied in dry beans, or up to 60 fluid ounces per acre in dry peas, lentils
and chickpeas, in 10 to 20 gallons of water using ground application equipment, or apply a 2-percent
solution using a handheld sprayer. For maximum performance, apply this product when these weeds
are at or beyond the bud stage of growth.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest. Only one spot
application may be made per year. Do not combine spot application with a preharvest broadcast
application on the same crop area. Allow a minimum of 30 days between application and the planting
of any crop not listed in this label. Do not feed vines and hay from the application area to livestock. Do
not apply this product as a spot application in cowpeas or field (feed) peas, since these are considered
to be grown only as livestock feed.
Preharvest (Dry Varieties Only)
USE INSTRUCTIONS: This product may be applied over the top of any dry legume variety listed in
this section prior to harvest, except cowpeas or field (feed) peas. Up to 20 fluid ounces of this product
per acre may be applied in dry beans, or up to 60 fluid ounces per acre in dry peas, lentils, and
chickpeas, in 3 to 20 gallons of water per acre at the hard dough stage of the legume seed (30 percent
grain moisture or less). Preharvest application is not recommended for legumes grown for seed, as a
reduction in germination or vigor may occur.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest. Only one preharvest
application may be made per year. Do not combine a preharvest application with a spot application on
the same crop area. Allow a minimum of 30 days between application and the planting of any crop not
listed on this label. Do not feed vines and hay from the application area to livestock. Do not make a
preharvest application of this product in cowpeas or field (feed) peas, since these are considered to be
grown only as livestock feed.
9.10.7 Root and Tuber Vegetables
LABELED CROPS: Arracacha; Arrowroot; Chinese artichoke; Jerusalem artichoke; Beet (garden);
Burdock; Canna; Carrot; Cassava (bitter and sweet); Celeriac; Chayote (root); Chervil (turnip-rooted);

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 44 of 165 Revised June 2021
Chicory; Chufa; Dasheen (taro); Galangal; Ginger; Ginseng; Horseradish; Leren; Kava (turnip-rooted);
Parsley (turnip-rooted); Parsnip; Potato; Radish; Oriental radish; Rutabaga; Salsify; Black salsify;
Spanish salsify; Skirret; Sweet potato; Tanier; Turmeric; Turnip; Wasabi; Yacon; Yam bean; True yam
TYPES OF APPLICATION: Those listed in Section 9.0, plus Directed Application (non-bearing
ginseng); Wiper Application (carrot, rutabaga, sweet potato)
Directed Application in Ginseng (Non-Bearing Only)
USE INSTRUCTIONS: This product may be applied for weed control in established non-bearing
ginseng using a boom sprayer, CDA, shielded sprayer, wiper applicator, handheld or backpack wand,
lance, or orchard gun. See additional use instructions in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label.
PRECAUTIONS: Control the application so as not to allow any contact of this product with the ginseng
plant. Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation could
result in discoloration, stunting or destruction.
RESTRICTIONS: Application must be made a minimum of one year prior to ginseng harvest.
Wiper Application (Carrot, Rutabaga and Sweet Potato Only)
USE INSTRUCTIONS: A 33-percent solution of this product by volume in water may be applied using
a wiper applicator over the top of carrot, rutabaga and sweet potato for the control of tall weeds. See
additional use instructions for wiper applicators in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label.
RESTRICTIONS: For carrot, a maximum of two wiper or sponge bar applications may be made a
minimum of 60 days prior to harvest following the first application and 7 days prior to harvest following
the second application or if only one wiper application is made over the top of the carrot crop. For
rutabaga, allow a minimum of 14 days between application and harvest. For sweet potato, a maximum
of five wiper or sponge bar applications may be made with a minimum of 14 days between applications
and a minimum of 7 days prior to harvest.

9.11 Miscellaneous Crops
LABELED CROPS: Aloe vera; Asparagus; Bamboo shoots; Globe artichoke; Okra, Peanut; Pineapple;
Sugarbeet
TYPES OF APPLICATION: Those listed in Section 9.0, plus Spot Application (asparagus)

[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with sugarbeet with Roundup Ready Technology, see the “ROUNDUP READY AND
OTHER GLYPHOSATE-TOLERANT CROPS” section of this label.]
PRECAUTIONS: Preemergence application must be made before the crop emerges from the soil to avoid
severe crop injury. Apply before seed germination in coarse sandy soils to further minimize the risk of crop
injury. In crops with vines, apply this product in row middles using a hooded sprayer, shielded sprayer or
wiper applicator prior to vine development, otherwise severe crop injury or destruction could result.
Spot Weed Control, Site Preparation
USE INSTRUCTIONS: This product may be applied for spot weed control and site preparation prior to
planting or transplanting crops listed in this section.
PRECAUTIONS: This product could cause crop injury when applied prior to transplanting or direct-seeding
crops into plastic mulch. Remove residual product from the plastic prior to planting with a single 0.5-inch

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 45 of 165 Revised June 2021
application of water, either by natural rainfall or by irrigation. Ensure that the wash water flushes off the
plastic mulch and does not enter transplant holes.
RESTRICTIONS: Allow a minimum of 21 days between residual product removal and transplanting. Do not
apply this product within 7 days prior to emergence of the first asparagus spears. Do not feed or graze
pineapple forage from within the application area.
Spot Application (Asparagus)
USE INSTRUCTIONS: This product may be applied immediately after cutting asparagus, but prior to the
emergence of new spears.
RESTRICTIONS: Do not apply this product to more than 10 percent of the total field area to be harvested.
Do not harvest asparagus within 5 days of a spot application.
Post-Harvest in Asparagus
USE INSTRUCTIONS: This product may be applied for weed control after the last harvest of asparagus
and all spears have been removed. If spears are allowed to re-grow, delay application until ferns have
developed and make the application as a directed or shielded spray in order to avoid contact of this product
with ferns, stems or spears. See additional use instructions in the “APPLICATION EQUIPMENT AND
TECHNIQUES” section of this label.
PRECAUTIONS: Direct contact of this product with asparagus could result in serious crop injury.
10.0 TREE, VINE AND SHRUB CROPS
THIS SECTION PROVIDES DIRECTIONS FOR USE THAT APPLY TO ALL TREE, VINE, AND SHRUB
CROPS LISTED IN THE FOLLOWING SECTIONS. SEE THE INDIVIDUAL CROP SECTIONS FOR
SPECIFIC DIRECTIONS FOR USE, PREHARVEST INTERVALS, PRECAUTIONS AND RESTRICTIONS.
TYPES OF APPLICATION: Preplant (site preparation); Broadcast Spray; Selective Equipment Application
(shielded sprayer, wiper applicator), Directed Spray and Spot Application in Middles (between rows of trees,
vines or bushes) and Strips (within rows of trees, vines or bushes); Site Weed Control; Perennial Grass
Suppression; Cut Stump Application
USE INSTRUCTIONS: Unless specifically prohibited in the individual crop sections that follow, this product
may be applied using a boom sprayer, controlled droplet applicator (CDA), shielded sprayer, wiper
applicator, handheld or backpack sprayer, lance or orchard gun, in middles (between rows of trees, vines
or bushes) and strips (within rows of trees, vines or bushes), for weed control or perennial grass
suppression in established tree fruit and nut groves, orchards and vineyards. It may also be used for site
preparation prior to planting or transplanting these crops.
Apply 10 fluid ounces to 3.125 quarts of this product per acre as directed in the “ANNUAL WEEDS RATE
SECTION” and “PERENNIAL WEEDS RATE SECTION” of this label.
 Use a higher application rate within
a given range when weeds are stressed, growing in dense populations or greater than 12 inches tall.
Application may be repeated as needed up to a maximum of 6.75 quarts of this product (8 pounds of
glyphosate acid) per acre per year. Allow a minimum of 14 days between applications.
PRECAUTIONS: Use extreme care to avoid contact of this herbicide solution, spray, drift or mist with
foliage or green bark of trunk, branches, suckers, fruit or other parts of desirable trees, canes and vines.
Avoid application when recent pruning wounds or other mechanical injury have occurred. Contact of this
product with other than matured brown bark could result in serious crop damage or destruction. Only
shielded or directed sprayers may be used in crops where the potential for crop contact is high, and then
only where there is sufficient clearance. For application in strips (within rows of trees), only selective
equipment (directed spray, hooded sprayer, shielded sprayer, or wiper applicator) may be used in order to
minimize the potential for overspray or drift of this product onto the crop. For berry crops, hooded sprayers

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 46 of 165 Revised June 2021
must be fully enclosed including top, sides, front and back. Only wiper applicators or shielded sprayers
capable of preventing all contact of this product with the crop may be used. See additional use instructions
and precautions in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: Before using this product, read and follow the Maximum Application Rate information in
the “PRODUCT INFORMATION” section of this label. Observe these and all other maximum application
rates stated throughout this label. Maximum application rates apply to the use of this product combined
with the use of any and all other herbicides containing glyphosate as the active ingredient, whether applied
separately or as mixtures. Calculate the application rates (glyphosate acid equivalent) and ensure that the
total use of this and other glyphosate-containing products does not exceed the stated maximum rate. Allow
a minimum of 3 days between application and transplanting.
Middles and Strips Management
USE INSTRUCTIONS: This product will control or suppress annual and perennial weeds and ground covers
growing between rows (middles) and within rows (strips) of tree, vine and shrub crops listed on this label.
If weeds are under drought stress, irrigate prior to application. Reduced weed control could result if weeds
have been recently mowed at the time of application.
TANK MIXTURES: A tank mixture of this product plus Goal 2XL (EPA Reg. No. 62719-424; oxyfluorfen)
may be applied for annual weed control between rows and within rows of a variety of tree, vine, and shrub
crops when weeds are stressed or growing in dense populations. Application of 10 to 20 fluid ounces of
this product per acre plus an appropriate rate of Goal 2XL will control annual weeds with a maximum height
or length of 6 inches, including crabgrass, common groundsel, junglerice, common lambsquarters, redroot
pigweed, London rocket, common ryegrass, shepherd’s-purse, annual sowthistle, filaree (suppression
only), horseweed/marestail, stinging nettle and common purslane (suppression only). This tank-mix will
also control common cheeseweed (malva) or hairy fleabane with a maximum height or length of 3 inches.
This product may also be applied to row middles and strips in tank mixtures with products containing one
or more of the active ingredients listed below [Optional text:, or one or more of the products listed].
[Active ingredients and products to be added to the final printed label for tank-mixing may be
selected from the following list:
2,4-D; bromacil; clethodim; diuron; fluazifop-p-butyl; flumioxazin; glufosinate-ammonium;
indaziflam; napropamide; norflurazon; oryzalin; oxyfluorfen; pendimethalin; penoxsulam; pyraflufen
ethyl; rimsulfuron; saflufenacil; sethoxydim; thiazopyr
Alion (EPA Reg. No. 264-1106; indaziflam); Rely 280 (EPA Reg. No. 264-829; glufosinate-
ammonium)
Alion; Chateau Herbicide SW; Devrinol 2-XT; Devrinol 50-DF; Devrinol 50-DF Ornamental; Devrinol
DF-XT; Devrinol DF-XT Ornamental; Direx 4L; Dri-Clean; Fusilade II Turf & Ornamental; Fusilade
DX; Goal 2XL; GoalTender; Karmex DF; Matrix FNV; Matrix SG; Orchard Master Broadleaf;
Orchard Master CA; Pindar GT; Poast; Poast Plus; Prowl 3.3 EC; Prowl H2O; Princep 4L; Princep
Caliber 90; Princep Liquid; Rely 280Select 2 EC; Select Max Herbicide with Inside Technology;
Surflan AS Agricultural; Surflan AS Specialty; Surflan Flex; Surflan XL 2G; Treevix Powered by
Kixor; Venue; Visor Broadcrop
Ensure that the product used is labeled for application within the crop being grown and at the maturity stage
of the trees (bearing or non-bearing). It is the responsibility of the pesticide user to ensure that the intended
use is included on the label of all products added to a tank mixture. Read and follow label directions for all
products added to the mix. Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture. [Optional text, only required if the product information is not

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 47 of 165 Revised June 2021
included in the list below: For more information on the products listed, see the “TANK-MIX PRODUCT
INFORMATION” section of this label.]
RESTRICTIONS: Do not apply these tank mixtures in Puerto Rico.
Perennial Grass Suppression
This product will suppress perennial grasses such as bahiagrass, bermudagrass, tall fescue, orchardgrass,
Kentucky bluegrass and quackgrass that are grown as ground covers in tree, vine and shrub crops.
For suppression of tall fescue, fine fescue, orchardgrass and quackgrass, apply 4 fluid ounces of this
product in 10 to 20 gallons of water per acre.
For suppression of Kentucky bluegrass covers, apply 4 fluid ounces of this product per acre. Do not add
ammonium sulfate to the spray mix.
For maximum performance, mow cool-season grass covers in the spring to even their height and then apply
this product 3 to 4 days after mowing.
For suppression of vegetative growth and seedhead inhibition of bahiagrass for approximately 45 days,
apply 4 fluid ounces of this product in 10 to 25 gallons of water per acre 1 to 2 weeks after full green-up or
after mowing to a uniform height of 3 to 4 inches prior to seedhead emergence. For suppression for up to
120 days, apply 2.5 fluid ounces of this product per acre, followed by an application of 1.25 to 2.5 fluid
ounces per acre about 45 days later. Make no more than two applications per year.
For burndown of bermudagrass, apply 20 to 40 fluid ounces of this product in 3 to 20 gallons of water per
acre. Make this application only if reduction of the bermudagrass stand can be tolerated. When burndown
is needed prior to harvest, make the application a minimum of 21 days prior to harvest to allow sufficient
time for burndown to occur.
For suppression of bermudagrass, apply 4 to 10 fluid ounces of this product per acre east of the Rocky
Mountains and 10 fluid ounces west of the Rocky Mountains in a total spray volume of 3 to 20 gallons per
acre no sooner than 1 to 2 weeks after full green-up. If the bermudagrass is mowed prior to application,
maintain a minimum of 3 inches in height. Sequential applications may be made when re-growth occurs
and bermudagrass injury and stand r eduction can be tolerated. East of the Rocky Mountains, apply 4 to 6
fluid ounces of this product per acre in shaded conditions or where a lesser degree of suppression is
desired.
Cut Stump Application
Application of this product to a freshly cut tree stump may be made during site preparation or site renovation
to control re-growth and re-sprouting of stumps of many tree species, some of which are listed below.
Citrus Trees: Calamondin; Chironja; Citron; Citrus hybrids; Grapefruit; Kumquat; Lemon; Lime; Mandarin
(tangerine); Orange (all); Pummelo; Tangelo (ugli); Tangor
Fruit Trees: Apple; Apricot; Cherry (sweet, sour); Crabapple; Loquat; Mayhaw; Nectarine; Olive; Peach;
Pear; Plum/Prune (all); Quince
Nut Trees: Almond; Beechnut; Brazil nut; Butternut; Cashew; Chestnut; Chinquapin; Filbert (hazelnut);
Hickory nut; Macadamia; Pecan; Pistachio; Walnut (black, English)
USE INSTRUCTIONS: Cut the tree close to the soil surface and immediately apply a 50- to 100-percent
(undiluted) solution of this product to the freshly cut surface using application equipment capable of covering
the entire cambium. A delay in application could result in reduced performance. For optimal performance
on tree stumps, cut the tree during period of active growth and full leaf expansion and apply this product.
PRECAUTIONS: DO NOT MAKE A CUT STUMP APPLICATION WHEN THE ROOTS OF ADJACENT
DESIRABLE TREES MIGHT BE GRAFTED TO THE ROOTS OF THE CUT STUMP, AS INJURY COULD

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 48 of 165 Revised June 2021
OCCUR IN THE ADJACENT TREES. Some sprouts, st ems or trees can share a common root system.
Adjacent trees having a similar age, height and spacing could be an indicator of a shared root system.
Whether grafted or shared, injury is likely to occur to adjacent stems or trees when this product is applied
to one or more trees sharing a common root system.
10.1 Berry and Small Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Amur River grape; Aronia berry; Bayberry;
Bearberry; Bilberry; Blackberry (including Andean blackberry, arctic blackberry, bingleberry, black satin
berry, boysenberry, brombeere, California blackberry, Cherokee blackberry, chesterberry, Cheyenne
blackberry, common blackberry, coryberry, darrowberry, dewberry, Dirksen thornless berry, evergreen
blackberry, Himalayaberry, hullberry, lavacaberry, loganberry, lowberry, Lucretiaberry, mammoth
blackberry, marionberry, mora, mures de ronce, nectarberry, Northern dewberry, olallieberry, Oregon
evergreen berry, phenomenalberry, rangeberry, ravenberry, rossberry, Shawnee blackberry, Southern
dewberry, tayberry, youngberry, zarzamora); Blueberry (highbush, lowbush); Buffaloberry; Che; Chilean
guava; Chokecherry; Cloudberry; Cranberry (including highbush); Currant (black, Buffalo, red, native);
Elderberry; European barberry; Gooseberry; Grape; Honeysuckle (edible); Huckleberry; Jostaberry;
Juneberry (Saskatoon berry); Kiwifruit (fuzzy, hardy); Ligonberry; Maypop; Mountain pepper berries;
Mulberry; Muntries; Partridgeberry; Phalsa; Pincherry; Raspberry (black, red, wild); Riberry; Salal;
Schisandra berry; Sea buckthorn; Serviceberry; Strawberry
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: To avoid damage, spray solutions of this product must not be allowed to come into contact
with desirable vegetation, including green shoots, canes or foliage. In the northeast and Great Lakes
regions, apply this product in grape vineyards prior to the end of the bloom stage in order to avoid crop
injury, or apply using a shielded sprayer or wiper applicator. USE THIS PRODUCT WITH EXTREME CARE
AROUND RASPBERRY, AS SERIOUS CROP DAMAGE CAN OCCUR IF THIS PRODUCT COMES INTO
CONTACT WITH ANY PART OF THE VINE. To the extent consistent with applicable law, grower assumes
all responsibility for crop losses resulting from misapplication of this product.
RESTRICTIONS: Allow a minimum of 3 days between application of this product and transplanting. Allow
a minimum of 30 days between application and harvest of cranberries or the planting of any crop not listed
on this label. Allow a minimum of 14 days between application and harvest for all other berry and small
fruit crops listed here. Do not apply this product using selective equipment in kiwifruit.
Spot Application
USE INSTRUCTIONS: Spot application using a handheld sprayer or other appropriate application
equipment listed in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label may be
used to control weeds in berry and small fruit crops listed in this section.
For control of weeds growing in dry ditches (interior and perimeter) of cranberry production areas, drop
water level to remove standing water in ditches and apply a 1- to 2-percent solution of this product with a
handheld sprayer to adequately wet the vegetation only; do not spray to the point of runoff. To achieve
maximum weed control in dry ditches, apply this product within 1 day after water drawdown to ensure
application to actively growing weeds and allow a minimum of 2 days after application before reintroduction
of water.
RESTRICTIONS: Allow a minimum of 30 days between spot application and harvest of cranberries. Do not
apply directly to water. Use nozzles that produce medium- to large-sized droplets to minimize spray drift
and avoid crop injury.
Post-Harvest Application in Cranberry Bogs
USE INSTRUCTIONS: This product may be applied for weed control after the harvest of berries and small
fruits listed in this section. In cranberry bogs, apply this product after cranberry vines are dormant (after

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 49 of 165 Revised June 2021
they have turned red) using a handheld sprayer, wiper applicator, or any other appropriate application
equipment listed in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label. With a
handheld sprayer, apply a 0.3- to 0.6-percent solution of this product to adequately wet the vegetation only;
do not spray to the point of runoff. With a handheld boom sprayer, apply 40 to 80 fluid ounces of this product
per acre.
PRECAUTIONS: Even though vines appear dormant, contact of this product with desirable vegetation could
result in damage or severe plant injury. Cranberry plants that are directly sprayed could be killed.
RESTRICTIONS: Apply this product only after cranberries have been harvested. Do not apply to more than
10 percent of the total bog. Allow a minimum of 6 months between post-harvest application and the next
harvest of cranberries. Do not apply using aerial application equipment. Do not apply directly to water.
10.2 Citrus Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Calamondin; Chironja; Citron; Citrus Hybrids;
Grapefruit (including Japanese summer); Kumquat; Lemon; Lime (including Australian desert lime,
Australian finger lime, Australian round lime, Brown river finger lime, Mount white, New Guinea wild, Russell
river, sweet, and Tahiti); Mandarin (including Mediterranean, Satsuma); Orange (all); Pummelo; Tangelo;
Tangerine (Mandarin); Tangor; Uniq Fruit (ugli)
TYPES OF APPLICATION: Those listed in Section 10.0
USE INSTRUCTIONS: The following use instructions pertain to application in Florida and Texas only.
For burndown or control of the weeds listed below, apply this product at the specified rate in 3 to 30 gallons
of water per acre. Where weed foliage is dense, use 10 to 30 gallons of water per acre.
To control goatweed, apply 40 to 60 fluid ounces of this product in 20 to 30 gallons of water per acre when
target plants are actively growing. Apply 40 fluid ounces per acre when target plants are less than 8 inches
tall and 60 fluid ounces per acre when plants are greater than 8 inches tall. If goatweed is greater than 8
inches tall, the addition of Krovar I DF (EPA Reg. No. 5481-635; bromacil, diuron) or Karmex DF (EPA Reg.
No. 66222-51; diuron) [Alternative text: bromacil and/or diuron] to the application mixture could improve
weed control. Refer to the individual product labels for specific crops, rates, geographic restrictions and
precautionary statements.
Weed Species
 Level of Perennial Weed Control at
Various Application Rates
 (amount of this product per acre)
20 fl oz 40 fl oz 60 fl oz 3.125 quarts
Bermudagrass B -- PC C
Guinea grass
Texas and Florida Ridge
Florida Flatwoods

B
–

C
B

C
C

C
C
Para grass B C C C
Torpedograss S -- PC C
S = Suppression, PC = Partial Control, B = Burndown, C = Control
RESTRICTIONS: Allow a minimum of 1 day between application and harvest in citrus fruit crops. For citron
groves, apply as directed spray only.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 50 of 165 Revised June 2021
10.3 Pome Fruit Crops
LABELED CROPS: All cultivars, varieties and/or hybrids of Apple; Azarole; Crabapple; Loquat; Mayhaw;
Medlar; Pear (including Asian pear); Quince (including Chinese and Japanese quince); Tejocote
TYPES OF APPLICATION: Those listed in Section 10.0
RESTRICTIONS: Allow a minimum of 1 day between application and harvest of pome fruit.
10.4 Stone Fruit Crops
LABELED CROPS: Apricot; Cherry (sweet, tart); Nectarine; Olive; Peach; Plum/Prune (all types); Plumcot
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: Avoid application near trees with recent pruning wounds or other mechanical injury. Apply
only near trees that have been planted in the orchard for a minimum of 2 years. ENSURE THAT NO PART
OF A PEACH TREE COMES INTO CONTACT WITH OVERSPRAY OR DRIFT OF THIS PRODUCT.
RESTRICTIONS: Allow a minimum of 17 days between application and harvest of stone fruit. In olive
groves, apply this product as a directed spray only. Remove suckers and low-hanging limbs a minimum of
10 days prior to application.
10.5 Tree Nut Crops
LABELED CROPS: Almond; Beechnut; Betelnut; Brazil nut; Butternut; Cashew; Chestnut; Chinquapin;
Coconut; Filbert (hazelnut); Hickory nut; Macadamia; Pecan; Pine nut; Pistachio; Walnut (black, English)
TYPES OF APPLICATION: Those listed in Section 10.0
RESTRICTIONS: Allow a minimum of 3 days between application and harvest of tree nuts, except coconut.
Allow a minimum of 14 days between application and harvest of coconut.
10.6 Tropical and Subtropical Trees and Fruit Crops
LABELED CROPS: Ambarella; Atemoya; Avocado; Banana; Barbados cherry (acerola); Biriba; Blimbe;
Breadfruit; Cacao (cocoa) bean; Canistel; Carambola (starfruit); Cherimoya; Coffee; Custard apple; Dates;
Durian; Feijoa; Figs; Governor’s plum; Guava; Ilama; Imbe; Imbu; Jaboticaba; Jackfruit; Longan; Lychee;
Mamey apple; Mango; Mangosteen; Marmaladebox (genip); Mountain papaya; Noni (Indian mulberry);
Papaya; Pawpaw; Plantain; Persimmon; Pomegranate; Pulasan; Rambutan; Rose apple; Sapodilla; Sapote
(black, mamey, white); Spanish lime; Soursop; Star apple; Sugar apple; Surinam cherry; Tamarind; Tea;
Ti; Wax jambu
TYPES OF APPLICATION: Those listed in Section 10.0 and as a Bananacide (banana only).
RESTRICTIONS: Allow a minimum of 1 day between application and harvest in banana, coffee, guava,
papaya, and plantain crops. Allow a minimum of 14 days between application and harvest of all other
tropical or subtropical tree fruit listed here. In coffee and banana, delay application a minimum of 3 months
after transplanting to allow the new plants to become established.
Bananacide (Banana Only)
USE INSTRUCTIONS: This product may be used to destroy banana plants infected with the Banana
Bunchy Top Virus, as well as non-infected banana plants, in order to establish a disease-free buffer around
a plantation. Remove all fruit from the plants within the area prior to treatment. Inject 0.04 fluid ounce (1
milliliter) of this concentrated product (undiluted) for every 2 to 3 inches of pseudostem diameter of the
banana plant to be controlled. Make the injection at least one foot above the ground, except for very small
plants, which can be injected vertically into the top. Any subsequent re-growth must also be destroyed.
Mechanically destroy all plants and mats (or units) within a 4-foot radius around a treated mat.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 51 of 165 Revised June 2021
For control of the Banana Bunchy Top Virus, it is critical that the grower follow a strict control program
involving monitoring for diseased plants, spraying to control the aphid vector, and destruction of all infected
mats (or units). An infected plant might not show symptoms of the Banana Bunchy Top Virus for up to 125
days; therefore, it is critical that the entire mat (or unit) containing the diseased plant be destroyed
immediately.
RESTRICTIONS: Do not apply more than 0.5 fluid ounce (15 milliliters) of this product per mat (or unit). Do
not harvest any fruit or plant material from treated mats (or units) following injection. Do not allow livestock
to consume treated plant material. Following transplant of new banana plants into treated areas, allow
plants to become established for a minimum of 3 months before applying this product for weed control.
10.7 Vine Crops
LABELED CROPS: Hops; Passion fruit
TYPES OF APPLICATION: Those listed in Section 10.0

USE INSTRUCTIONS: Apply this product for weed control only when green shoots, canes or foliage are
not in the spray zone.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest of these vine crops.
10.8 Miscellaneous Tree Food Crops
LABELED CROPS: Cactus (all, including prickly pear and dragon fruit); Palm
TYPES OF APPLICATION: Those listed in Section 10.0
10.9 Non-Food Tree Crops
LABELED CROPS: Pine; Poplar; Eucalyptus; Christmas trees; all other non-food tree crops
TYPES OF APPLICATION: Those listed in Section 10.0
PRECAUTIONS: Avoid contact of spray, drift or mist of this product with foliage or green bark of established
Christmas trees and other pine trees. Desirable plants can be protected from the spray solution by using
shields or coverings of impermeable materials.
RESTRICTIONS: DO NOT apply this product as a broadcast application over the top of plantations or tree
crops.
Site Preparation
USE INSTRUCTIONS: This product may be used for weed control prior to planting non-food tree crops.
PRECAUTIONS: Protect non-target plants from being sprayed with this product during site preparation
application.
Directed Spray, Spot Application, Wiper Application
USE INSTRUCTIONS: This product may be applied as a post-directed spray or spot application, or applied
using a wiper applicator, around established Christmas trees, eucalyptus, poplar, and all other non-food
tree crops.
11.0 PASTURE GRASSES, FORAGE LEGUMES AND RANGELAND
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE
SECTION” of this label for application rates of this product for specific weeds. When applied as directed,
this product will control those annual and perennial grasses and broadleaf weeds listed. Application rates
specified on this label for hard-to-control weeds, or those specified on separate supplemental labeling for
this product, supersede rates listed in the “ANNUAL WEEDS RATE SECTION,” “PERENNIAL WEEDS

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 52 of 165 Revised June 2021
RATE SECTION” and “WOODY BRUSH, TREES AND VINE S RATE SECTION” of this label. Additional
information on hard-to-control weeds can be found on Fact Sheets published for this product.
RESTRICTIONS: Before using this product, read and follow the Maximum Application Rate information in
the “PRODUCT INFORMATION” section of this label. Observe these and all other maximum application
rates stated throughout this label. Maximum application rates apply to the use of this product combined
with the use of any and all other herbicides containing the active ingredient glyphosate, whether applied
separately or as mixtures. Calculate the application rates (glyphosate acid equivalent) and ensure that the
total use of this and other glyphosate-containing products does not exceed the stated maximum rate.
11.1 Alfalfa, Clover, and Other Forage Legumes
LABELED CROPS: Alfalfa; Clover; Kenaf; Kudzu; Lespedeza; Leucaena; Lupin; Sainfoin; Trefoil; Velvet
bean; Vetch (all types)
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Spot Application; Wiper Application;
Preharvest (except kenaf and leucaena); Stand Removal

[Optional label text to be used only if Roundup Ready crops are included on the final printed label: For
directions for use with alfalfa with Roundup Ready Technology, see the “ROUNDUP READY AND
OTHER GLYPHOSATE-TOLERANTCROPS” section of this label.]
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting crops listed in this
section, but prior to crop emergence.
RESTRICTIONS: Remove domestic livestock before application.
Spot Application, Wiper Application
USE INSTRUCTIONS: This product may be applied as a targeted spot application or over the top of crops
listed in this section using a wiper applicator. See additional instructions on the use of wiper applicators in
the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label. Application may be repeated
in the same area at 30-day intervals.
RESTRICTIONS: Make spot and wiper applications only in areas where the movement of domestic
livestock can be controlled. Remove domestic livestock before application and wait a minimum of 3 days
after application before grazing livestock or harvesting. Do not apply this product to more than 10 percent
of the total field area at any one time.
Weed Control in Dormant Alfalfa
USE INSTRUCTIONS: This product will control or suppress many weeds, including quackgrass, downy
brome and cheatgrass in dormant alfalfa. Apply 5 to 8 fluid ounces of this product per acre in the spring
when alfalfa is dormant, after spring temperatures have warmed enough to encourage weed growth, but
prior to initiation of trifoliate leaf expansion of the alfalfa crop. Application made after expansion of the first
trifoliate leaf will cause growth reduction and reduced crop yield.
PRECAUTIONS: Improper application of this product to alfalfa can cause crop injury. Do not use this
product on dormant alfalfa if a slight yield reduction in the first cutting cannot be tolerated. Slight
discoloration of the alfalfa crop could occur, but will re-green and resume growth under moist soil conditions
as effects of this product wear off.
RESTRICTIONS: Do not add ammonium sulfate to spray solutions of this product for application to dormant
alfalfa. Do not make more than one application per year. Allow a minimum of 36 hours after application
before grazing livestock or harvesting.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 53 of 165 Revised June 2021
Preharvest (Except Kenaf and Leucaena), Stand Removal
USE INSTRUCTIONS: This product may be applied as a broadcast application prior to harvest (except in
kenaf and leucaena) in declining stands, or in any stand where severe crop injury or destruction is
acceptable, or to remove an established stand of any forage legumes listed in this section. Application may
be made at any time of the year to control annual and perennial weeds, including quackgrass. For
quackgrass control, apply in the spring, late-summer or fall when quackgrass is actively growing. For
complete control of quackgrass, application must be followed by deep tillage. If the crop is to be harvested
or grazed by livestock, up to 40 fluid ounces of this product per acre may be applied in alfalfa and up to 30
fluid ounces per acre in all other legumes listed in this section. For complete removal of established stands
of clover, it might be necessary to use a higher application rate, as listed in the “PERENNIAL WEEDS
RATE SECTION” of this label.
PRECAUTIONS: This application can destroy an alfalfa stand and severely injure or destroy other legume
crops listed, such as clover. Preharvest application on alfalfa grown for seed could result in a reduction in
germination or vigor. To the extent consistent with applicable law, buyer and all users are responsible for
such loss or damage in connection with the preharvest use of this product on alfalfa grown for seed.
RESTRICTIONS: Make only one application to an existing crop stand per year. Remove domestic livestock
before application. Foliage within the application area can be harvested and fed to livestock according to
the application rates and intervals defined in the following table. If applying at a rate greater than those
listed here, do not harvest foliage for livestock feed or allow livestock to graze within the application area.
Crop
Maximum Single Preharvest
Application Rate
(per acre)
Minimum Interval Between
Application and Harvest or
Livestock Grazing
Alfalfa 40 fluid ounces 36 hours
All other legumes listed 30 fluid ounces 3 days
Crops listed on this label may be planted into the application area at any time; all other crops may be planted
30 days after application.
11.2 Conservation Reserve Program (CRP)
TYPES OF APPLICATION: Postemergence Weed Control in Dormant CRP Grasses; Wiper Application;
Renovation (rotating out of CRP); Site Preparation
Postemergence Weed Control in Dormant CRP Grasses, Wiper Application
USE INSTRUCTIONS: Apply this product to suppress competitive growth and seed production of
undesirable vegetation on CRP land. Application may be made using a wiper applicator to control tall
weeds, or as a broadcast application or spot application to dormant CRP grasses. For selective weed
control using broadcast application equipment, apply 4 to 8 fluid ounces of this product per acre in early-
spring before desirable CRP grasses, such as crested and tall wheatgrass, break dormancy and initiate
green growth. Late-fall application may be made after desirable perennial grasses have reached dormancy.
PRECAUTIONS: Some stunting of CRP perennial grasses will occur if broadcast application is made when
plants are not dormant.
RESTRICTIONS: Do not apply more than 60 fluid ounces of this product per acre per year onto CRP land.
No waiting period is required between application and grazing or harvesting for feed.
Renovation (Rotating Out of CRP), Site Preparation
USE INSTRUCTIONS: This product may be used to prepare CRP land for crop production. Refer to
Federal, State or local use guides for CRP renovation information.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 54 of 165 Revised June 2021
RESTRICTIONS: Crops listed on this label may be planted into the area at any time; all other crops may
be planted 30 days after application.
11.3 Grass Seed and Sod Production
LABELED CROPS: Any grass ( Gramineae family) except Corn, Sorghum, Sugarcane and those listed in
the “CEREAL AND GRAIN CROPS” section of this label
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Renovation; Removal of Established
Stands; Site Preparation; Shielded Sprayer; Wiper Application; Spot Application; Creating Rows in Annual
Ryegrass
Preplant, At-Planting, Preemergence, Renovation, Removal of Established Stand, Site Preparation
USE INSTRUCTIONS: This product controls most existing vegetation for purposes of renovating turf or
forage grass seed production areas, or for establishing turfgrass grown for sod. This product may be used
to destroy undesirable grass vegetation when production fields are converted to alternate species or crops.
Do not disturb soil or underground plant parts before application and delay tillage or renovation techniques,
including vertical mowing, coring and slicing, for a minimum of 7 days after application to allow for herbicide
translocation into underground plant parts.
Apply before, during, or after planting, or for renovation purposes. Where existing vegetation is growing
under mowed turfgrass management, apply this product after omitting at least one regular mowing to allow
sufficient growth for good interception of the herbicide spray. For maximum control of existing vegetation,
delay planting until determining if any re-growth of underground plant parts will occur. Where repeat
applications are necessary, sufficient re-growth must be attained prior to application. For optimal weed
control in warm-season grasses, such as bermudagrass, summer or fall application of this product is best.
Broadcast application of this product may be used to control sod remnants or other unwanted vegetation
after sod is harvested. Application rates of up to 3.125 quarts per acre may be used to totally remove an
established stand of hard-to-kill grass species.
RESTRICTIONS: If application rate is 60 fluid ounces of this product per acre or less, no waiting period
between application and feeding or livestock grazing is required. If the rate is greater than 60 fluid ounces
per acre, remove domestic livestock before application and wait 8 weeks after application before grazing
or harvesting. Crops listed on this label may be planted into the area at any time; all other crops may be
planted 30 days after application.
Selective Equipment Application
USE INSTRUCTIONS: Apply 20 to 60 fluid ounces of this product in 10 to 20 gallons of water per acre
using a shielded sprayer to control weeds between grass seed rows. Uniform planting in straight rows will
aid shielded sprayer application. Best results can be obtained when the grass seed crop is small enough
to easily pass by the protective shields. See additional instructions on the use of shielded sprayers in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
PRECAUTIONS: Any contact of this product on any vegetation to which application is not intended could
cause damage.
Wiper Application
USE INSTRUCTIONS: This product may be applied over the top of desirable grasses using a wiper
applicator for the control of tall weeds. See additional instructions on the use of wiper applicators in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
PRECAUTIONS: Droplets, mist, foam or splatter of the herbicide solution settling onto desirable vegetation
could result in discoloration, stunting or destruction.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 55 of 165 Revised June 2021
Spot Application
USE INSTRUCTIONS: Apply a 0. 9-percent solution of this product using a handheld sprayer to control
weeds within established vegetation prior to heading of grasses grown for seed or to control sod remnants
or other unwanted vegetation after sod is harvested.
PRECAUTIONS: This product will kill the desirable grasses along with the weeds. Take care not to spray
or allow spray to drift outside the target area in order to avoid unwanted crop destruction.
Creating Rows in Annual Ryegrass
USE INSTRUCTIONS: Use low-pressure nozzles or drop nozzles designed to target the application over a
narrow band. Set nozzle height to establish the desired row spacing and apply 10 to 20 fluid ounces of this
product per acre. Best results can be obtained when application is made before ryegrass reaches 6 inches
in height. Use a higher application rate within this range when ryegrass is greater than 6 inches in height.
PRECAUTIONS: Take care not to spray or allow spray to drift outside target area in order to avoid unwanted
crop destruction. To the extent consistent with applicable law, grower assumes all responsibility for crop
losses resulting from misapplication of this product.
11.4 Pastures
LABELED CROPS: Bahiagrass; Bermudagrass; Bluegrass; Brome; Fescue; Guinea grass; Kikuyu grass;
Orchardgrass; Pangola grass; Ryegrass; Timothy; Wheatgrass and any grass ( Gramineae family) except
Corn, Sorghum, Sugarcane and those listed in the “CEREAL AND GRAIN CROPS” section of this label.
TYPES OF APPLICATION: Preplant; Preemergence; Pasture Renovation; Spot Application; Wiper
Application; Postemergence Weed Control (broadcast application)
Preplant, Preemergence, Pasture Renovation
USE INSTRUCTIONS: This product may be applied for weed control prior to planting or emergence of
forage grasses. This product may also be applied to control perennial pasture species listed on this label
prior to re-planting.
RESTRICTIONS: If application rates total 60 fluid ounces of this product per acre or less, no waiting period
between application and feeding or livestock grazing is required. If the rate is greater than 60 fluid ounces
per acre, remove domestic livestock before application and wait 8 weeks after application before grazing
or harvesting. Crops listed on this label may be planted into the area at any time; all other crops may be
planted 30 days after application.
Spot Application, Wiper Application
USE INSTRUCTIONS: This product may be applied in past ures as a targeted spot application or over the
top of desirable grasses using a wiper applicator to control tall weeds. To achieve maximum performance,
remove domestic livestock before application and wait a minimum of 7 days after application before grazing
livestock or harvesting for feed. See additional instructions on the use of wiper applicators in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: For spot application or use with a wiper applicator at rates of 60 fluid ounces per acre or
less, this product may be applied over the entire pasture or any portion of it. At rates above 60 fluid ounces
per acre, this product may be applied over no more than 10 percent of the total pasture at any one time.
Application may be repeated in the same area at 30-day intervals.
Postemergence Weed Control (Broadcast Application)
USE INSTRUCTIONS: This product may be applied to pastures to suppress competitive growth and seed
production of annual weeds and other undesirable vegetation. For selective weed control using broadcast
application equipment, apply 8 to 10 fluid ounces of this product per acre in early-spring before desirable

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 56 of 165 Revised June 2021
perennial grasses break dormancy and initiate green growth. Late-fall application may be made after
desirable perennial grasses have reached dormancy.
PRECAUTIONS: Some stunting of perennial grasses will occur if broadcast application is made when
plants are not dormant. Higher application rates may be used for hard-to-control weeds; however, higher
rates will cause stand reduction.
RESTRICTIONS: No waiting period is required between application and grazing or harvesting for feed. Do
not apply more than 60 fluid ounces of this product per acre per year onto pasture grasses except for
renovation use as described on this label. If replanting is needed due to severe stand reduction, wait a
minimum of 30 days after application before planting any crop not listed on this label.
11.5 Rangeland
TYPES OF APPLICATION: Postemergence
USE INSTRUCTIONS: This product will control or suppress many annual weeds growing in perennial cool-
and warm-season grass rangeland.
 Slight discoloration of the desirable grasses could occur, but will re-
green and resume growing under moist soil conditions as effects of this product wear off.
Preventing seed production is critical to the control of invasive annual grassy weeds on rangeland. Yearly
application of this product can be used to eliminate viable weed seeds in the soil after they germinate.
Delay grazing of the area after application to allow desirable perennials to grow, flower and re-seed the
area.
Apply 8 to 10 fluid ounces of this product per acre to control or suppress many weeds, including downy
brome, cheatgrass, cereal rye and jointed goatgrass on rangeland. Apply when most mature brome plants
are in early-flower and before the plants, including seedheads, turn color. Allowing for secondary weed
flushes to occur after spring rains further depletes the seed reserve and encourages perennial grass
conversion on weedy sites. Apply this product in the fall in areas where spring moisture is normally limited
and fall germination allows for good weed growth and weed seed depletion.
For control of medusahead, apply 10 fluid ounces of this product per acre at the 3-leaf stage. Delaying
application beyond this stage will result in reduced or unacceptable control. Controlled burning prior to
application can be useful in eliminating the thatch layer produced by slow decaying culms. Allow new growth
to occur before applying this product after a burn. Yearly application of this product is necessary to eliminate
the seedbank and allow desirable perennial grasses to re-establish in medusahead-dominated rangeland.
RESTRICTIONS: Do not apply more than 60 fluid ounces of this product per acre per year on rangeland.
Do not add ammonium sulfate to the spray mixture when applying this product on rangeland grasses. No
waiting period between application and feeding or livestock grazing is required.
12.0 ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS
ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS CONTAIN A PATENTED GENE
THAT PROVIDES TOLERANCE TO GLYPHOSATE, THE ACTIVE INGREDIENT IN THIS PRODUCT.
THIS PRODUCT WILL CAUSE SEVERE CROP INJURY OR DESTRUCTION AND YIELD LOSS IF
APPLIED TO CROPS THAT ARE NOT GLYPHOSATE TOLERANT. AVOID CONTACT OF THIS
PRODUCT WITH FOLIAGE, GREEN STEMS, OR FRUIT OF CROPS OR ANY DESIRABLE PLANTS
THAT DO NOT CONTAIN A GLYPHOSATE-TOLERANCE GENE, AS SEVERE PLANT INJURY OR
DESTRUCTION WILL RESULT. Information on Roundup Ready crops can be obtained from your seed
supplier or Bayer CropScience representative. Roundup Ready crops must be purchased from an
authorized licensed seed supplier. For information on other brands of glyphosate-tolerant crops, contact
the appropriate company representative.
The directions for use in the sections that follow, or those published separately on supplemental labeling
for this product, include all applications of this product that may be made onto a specified Roundup Ready

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 57 of 165 Revised June 2021
or other glyphosate-tolerant crop during the complete cropping season. DO NOT combine these directions
for use with the directions for use with the same crops listed in the “ANNUAL AND PERENNIAL CROPS”
and “PASTURE GRASSES, FORAGE LEGUMES AND RANGELAND” sections of this label, which are
intended for crops that do not contain a glyphosate-tolerance gene.
Roundup Ready seed and the method of selectively controlling weeds in a Roundup Ready crop are
protected under several U.S. Patents, including 5,352,605 and 5,633,435. [ This list will be updated at the
time of printing, if necessary. ] [ Alternative text : Roundup Ready seed and the method of selectively
controlling weeds in a Roundup Ready crop are protected under several U.S. Patents. For a list of patents,
go to www.monsantotechnology.com.]
A license to use Roundup Ready seed must be obtained prior to planting. Bayer CropScience retains
ownership of the gene and process technologies, and the Purchaser of the seed receives the right to use
the licensed genes and technologies subject to the limited use license conditions. Seed containing a
Roundup Ready trait cannot be used for research and demonstration, reverse engineering or in connection
with herbicide registration. Progeny seed containing a Roundup Ready trait may not be saved for replanting
or transferred to others for replanting. Contact your Authorized Bayer CropScience Retailer for information
on obtaining a limited use license.
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE
SECTION” of this label for application rates for specific weeds. When applied as directed, this product will
control the annual and perennial grasses and broadleaf weeds listed. Observe the maximum application
rates and crop stage timings specified for individual Roundup Ready and other glyphosate-tolerant crops
in the sections that follow.
Sprayer Preparation: It is important that sprayer and mixing equipment be clean and free of pesticide
residue before being used to apply this product over the top of Roundup Ready or other listed glyphosate
tolerant crops. Follow the cleaning procedures specified on the label of the product(s) previously used.
THOROUGHLY CLEAN THE SPRAY TANK AND ALL LINES AND FILTERS TO ELIMINATE POTENTIAL
CONTAMINATION FROM OTHER HERBICIDES PRIOR TO MIXING AND APPLYING THIS PRODUCT.
ATTENTION: AVOID DRIFT. USE EXTREME CARE WHEN APPLYING THIS PRODUCT TO PREVENT
INJURY TO DESIRABLE PLANTS AND CROPS THAT DO NOT CONTAIN A GLYPHOSATE-
TOLERANCE GENE.
Ground broadcast application – Apply this product in 5 to 20 gallons of spray solution per acre, unless
otherwise directed. Select proper nozzles and spray pressure settings to avoid generating a fine mist. For
best performance of this product when using ground application equipment, use flat-fan nozzles. Check for
even distribution of spray droplets.
Aerial application – Unless otherwise prohibited, all applications of this product described in this section
may be made using aerial application equipment, where appropriate, provided that the applicator complies
with the precautions and restrictions specified on this label and on all supplemental labeling published
separately for this product. Apply this product in 3 to 15 gallons of water per acre. See the “APPLICATION
EQUIPMENT AND TECHNIQUES” section of this label for important information on aerial application and
procedures for avoiding spray drift that could cause injury to any vegetation not intended for application.
Use of appropriate buffer zones will help prevent injury to adjacent vegetation.
See the “MIX ING” and “APPLICATION EQUIPMENT AND TECHNIQUES” sections of this label for
additional directions and restrictions on the application of this product.
TANK MIXTURES: Tank mixtures of this product with other herbicides, insecticides, fungicides,
micronutrients or foliar fertilizers could result in reduced weed control or crop injury when applied over the
top of Roundup Ready and other glyphosate-tolerant crops. Read the label of all products used in the tank
mixture prior to use to determine the potential for crop injury. Always read and follow label directions for all
products in the tank mixture. Use all products according to rates and timing specified on the product label.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 58 of 165 Revised June 2021
Always predetermine the compatibility of tank-mix products together in the carrier by mixing small
proportional quantities in advance. Bayer CropScience has not tested this product with all tank-mix product
formulations for compatibility, antagonism or performance. To the extent consistent with applicable law,
buyer and all users are responsible for any and all loss or damage in connection with the use or handling
of mixtures of this product with herbicides or other materials that are not specifically listed on this label or
on separate supplemental labeling or Fact Sheets for this product. See the “MIXING” section of this label
for more information on tank mixtures.
[Optional label text: Unless otherwise directed, nonionic surfactant may be added to the spray solution for
application to Roundup Ready and other glyphosate-tolerant crops. The addition of certain surfactants to a
spray solution of this product could result in some crop response including leaf speckling or leaf necrosis
due to the surfactant. Refer to the individual Roundup Ready or other listed glyphosate tolerant crop
sections that follow, or to separate supplemental labeling, for additional precautions or restrictions on the
use of surfactants. Refer to the “MIXING” section of this label for additional information on the use of
surfactants with this product.]
Ammonium sulfate may be added to spray solutions of this product for application to Roundup Ready and
other glyphosate-tolerant crops. Refer to the “MIXING” section of this label for instructions on the use of
ammonium sulfate.
The following use directions are based on a clean start at planting by using a burndown application or tillage
to control existing weeds before crop emergence. In no-till and stale seedbed systems, apply this product
as a preplant burndown application to control existing weeds prior to crop emergence. Some weeds, such
as black nightshade, broadleaf signalgrass, sicklepod, Texas panicum, sandbur, annual morning glory,
woolly cupgrass, shattercane, wild proso millet, burcucumber, and giant ragweed with multiple germination
times, or suppressed (stunted) weeds, might need a second application of this product for complete control.
Make second application after some re-growth has occurred and a minimum of 10 days after a previous
application of this product.
Application rates of this product specified on this label for hard-to-control weeds, or those specified on
separate supplemental labeling for this product, supersede rates in the “ANNUAL WEEDS RATE
SECTION” and “PERENNIAL WEEDS RATE SECTION” of this label. Additional information on hard-to-
control weeds can be found on Fact Sheets published for this product.
RESTRICTIONS: Before using this product, read and follow the Maximum Application Rate information in
the “PRODUCT INFORMATION section of this label. Observe these and all other maximum application
rates stated throughout this label. Maximum application rates apply to the use of this product combined
with the use of any and all other herbicides containing glyphosate, whether applied separately or as
mixtures. Calculate the application rates (glyphosate acid equivalent) and ensure that the total use of this
and other glyphosate-containing products does not exceed the stated maximum rate. When applying this
product as a tank mixture with one or more products, refer to each individual tank-mix product label for
restrictions and apply the tank mixture in accordance with the most restrictive statements for each product
in the tank.
12.1 Alfalfa with Roundup Ready Technology
The directions for use of this product provided in this section are specific to alfalfa containing events J101
and J163, which includes Alfalfa with Roundup Ready Technology.
TYPES OF APPLICATION: Preplant; At-planting; Preemergence; Postemergence (In-crop)
USE INTRUCTIONS: Refer to the following table for the maximum application rates of this product.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 59 of 165 Revised June 2021
Maximum Application Rates
Combined total per year for all applications, including Preplant
during year of establishment 5 quarts per acre
Preplant, At-planting and Preemergence single application 40 fluid ounces per acre
Combined total per year for In-crop applications on newly
established and established stands 124 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting alfalfa with Roundup
Ready Technology.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of alfalfa with Roundup Ready Technology
(in-crop) from emergence until 5 days prior to cutting. To maximize crop yield and quality potential of the
forage and hay, apply this product after weeds have emerged, but before alfalfa growth or re-growth
interferes with spray coverage of the target weeds.
Refer to the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE SECTION” of this label
for application rates for specific weeds. When applied as directed, this product will control the annual and
perennial grasses and broadleaf weeds listed. This product will also suppress or control the parasitic weed
dodder (Cuscuta spp.) in alfalfa with Roundup Ready Technology. More than one application might be
necessary for complete control.
PRECAUTIONS: Freezing or near freezing conditions, or large temperature swings, within 5 days after
application of this product to alfalfa with Roundup Ready Technology could result in a limited, temporary
crop response.
New Stand Establishment (Seeding Year) – Due to the biology and breeding constraints of alfalfa, up to
10 percent of the seedlings might not contain a Roundup Ready gene and will not survive after the first
application of this product. To eliminate the undesirable effects of stand gaps created by this loss of plants,
make a single application of at least 20 fluid ounces of this product per acre at or before the 4-trifoliate
growth stage. Refer to the following table for application rates during stand establishment (seeding year).
NEW STAND ESTABLISHMENT (Seeding Year)
Application Rates
Prior to First Cutting
From emergence up to 4 trifoliate leaves 20 to 40 fluid ounces per acre
From 5 trifoliate leaves up to 5 days before first cutting Up to 40 fluid ounces per acre
After First Cutting
In-crop application, per cutting, up to 5 days before cutting Up to 40 fluid ounces per acre
TANK MIXTURES: Up to 40 fluid ounces of this product per acre may be applied postemergence (in-crop)
over the top of alfalfa with Roundup Ready Technology in the seeding year in a tank-mix with products
containing one or more of the active ingredients listed below [Optional text:, or one or more of the products
listed,] after weeds have emerged, but before alfalfa growth or re-growth interferes with spray coverage of

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 60 of 165 Revised June 2021
the target weeds. Ensure that the product used in the tank-mix is labeled for application postemergence
(in-crop) to alfalfa. It is the responsibility of the pesticide user to ensure that the intended use is included
on the label of all products added to the tank mixture. Read and follow label directions for all products added
to the mix. Users must follow the most restrictive directions for use and precautionary statements of each
product in the tank mixture. [Optional text, only required if the product information is not included in the list
below: For more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION”
section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; imazamox; imazethapyr; sethoxydim; quizalofop-p-ethyl
Warrant (EPA Reg. No. 524-591; acetochlor)
Assure II; Poast; Poast Plus; Pursuit; Raptor; Select 2 EC; Select Max Herbicide with Inside
Technology; Warrant]
[Optional statement: Pursuit (EPA Reg. No. 241-310; imazethapyr) or Raptor (EPA Reg. No. 241-
379; imazamox) applied to seedling alfalfa could result in a temporary reduction in growth. Do not
include crop oil concentrate or methylated seed oil in tank mixtures of this product with Pursuit or
Raptor as unsatisfactory crop injury could result.]
Established Stands (Non-seeding Year) – Refer to the following table for directions and application rates
for in-crop application to established stands of alfalfa (non-seeding year).
ESTABLISHED STANDS (Non-seeding Year)
Application Rates
In-crop application, per cutting, up to 5 days before cutting Up to 40 fluid ounces per acre
TANK MIXTURES: This product may be applied postemergence (in-crop) over the top of established
stands of alfalfa with Roundup Ready Technology in tank mixtures described below according to the
growing condition of the crop. Ensure that the product used is labeled for application postemergence (in-
crop) to alfalfa. It is the responsibility of the pesticide user to ensure that the intended use is included on
the label of all products added to the tank mixture. Read and follow label directions for all products added
to the mix. Users must follow the most restrictive directions for use and precautionary statements of each
product in the tank mixture. [Optional text, only required if the product information is not included in the list
below: For more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION”
section of this label.]
Actively growing alfalfa: For control of emerged annual grasses and broadleaf weeds when alfalfa is
actively growing, this product may be applied at up to 40 fluid ounces per acre in a tank mixture with
products containing one or more of the active ingredients listed below [Optional text:, or one or more of the
products listed].
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; imazamox; imazethapyr; sethoxydim; quizalofop-p-ethyl
Warrant (EPA Reg. No. 524-591; acetochlor
Assure II; Poast; Poast Plus; Pursuit; Raptor; Select 2 EC; Select Max Herbicide with Inside
Technology; Warrant]

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 61 of 165 Revised June 2021
[Optional statement: Do not include crop oil concentrate or methylated seed oil in tank mixtures of
this product with Pursuit or Raptor as unsatisfactory crop injury could result.]
Dormant Alfalfa: For control of emerged annual grasses and broadleaf weeds when alfalfa is dormant,
this product may be applied at up to 40 fluid ounces per acre in a tank mixture with products containing one
or more of active ingredients listed below [Optional text:, or one or more of the products listed,] when daily
temperatures remain above freezing.
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
imazamox; imazethapyr; metribuzin; pronamide; propyzamide
Kerb 50-W; Kerb SC; Raptor; TriCor 4F; TriCor DF]
[Optional statement: Do not include crop oil concentrate or methylated seed oil in tank mixtures of
this product with Pursuit or Raptor as unsatisfactory crop injury could result.]
PRECAUTIONS: Where alfalfa with Roundup Ready Technology is grown with a companion or cover crop,
or is over-seeded with a second species, in-crop (over-the-top) application of this product will eliminate the
non-Roundup Ready (non-glyphosate-tolerant) species.
RESTRICTIONS: Do not exceed 40 fluid ounces per acre for any single in-crop application of this product.
Sequential applications of this product must be a minimum of 7 days apart. The combined total per year
for all in-crop applications in both newly established (seeding year) and established stands (non-seeding
year) must not exceed 124 fluid ounces per acre. Do not apply to frozen or snow-covered ground. Remove
domestic livestock before application and wait a minimum of 5 days after application before grazing, or
cutting or feeding of forage and hay.
12.2 Canola with Roundup Ready Technology (Spring Varieties)
The directions for use of this product provided in this section are specific to canola containing Event RT73,
which includes Canola with Roundup Ready Technology.
For directions for use of this product on canola with TruFlex Technology, refer to that section of this label.
DO NOT combine these directions for use on canola with Roundup Ready Technology with the directions
for use on canola with TruFlex Technology.
Spring canola with Roundup Ready Technology is defined as those canola varieties with Roundup Ready
Technology that are seeded in the spring and harvested in the fall and do not enter a winter dormancy
period.
TYPES OF APPLICATION : Preplant; At-Planting; Preemergence; Postemergence (In-crop);
Postemergence (In-crop) in Hybrid Seed Production Only
USE INSTRUCTIONS: Refer to the following table for the maximum application rates for this product with
spring varieties of canola with Roundup Ready Technology.
Maximum Application Rates
Total for all Preplant, At-Planting, Preemergence applications 40 fluid ounces per acre
Total for all In-crop applications from emergence to 6-leaf stage 20 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 62 of 165 Revised June 2021
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting spring canola with
Roundup Ready Technology.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 40 fluid ounces per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied postem ergence (in-crop) to spring varieties of canola
with Roundup Ready Technology from emergence through the 6-leaf stage of development, unless
otherwise directed. Application made during bolting or flowering could result in crop injury and yield loss.
To maximize yield potential, eliminate competing weeds early.
Single Application – Apply 10 to 15 fluid ounces of this product per acre no later than the 6-leaf stage for
the control of annual weeds. Avoid overlapping applications as this could result in temporary yellowing,
delayed flowering, and/or growth reduction. Similar crop injury could result when more than 10 fluid ounces
per acre is applied after the 4-leaf stage.
Sequential Application – Apply 10 fluid ounces of this product per acre to 1- to 3-leaf canola followed by
a sequential application at a minimum interval of 10 days, but no later than the 6-leaf stage. Sequential
application works better for control of early emerging annual and perennial weeds, such as Canada thistle
and quackgrass, or whenever more than one application is needed for adequate weed control.
RESTRICTIONS: No more than two in-crop (over-the-top) broadcast applications may be made from crop
emergence through the 6-leaf stage of development and the total in-crop application must not exceed 20
fluid ounces of this product per acre. Allow a minimum of 60 days between application and canola harvest.
Postemergence (In-crop) in Hybrid Seed Production Only
THIS POSTEMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA SEED PRODUCTION
OF BOTH SPRING AND WINTER VARIETIES. DO NOT MAKE THIS APPLICATION ON CANOLA
GROWN FOR FOOD OR FEED.
This product may be applied at a rate of between 10 and 20 fluid ounces per acre from emergence until
pollination is complete or near completion for the control of non-glyphosate-tolerant canola pollen parental
line(s) in hybrid canola seed production fields containing both canola with Roundup Ready Technology

line(s) and non-glyphosate tolerant line(s). Sequential applications may be made for the control of non-
glyphosate-tolerant pollen parental lines up to a maximum total application rate of 20 fluid ounces per acre.
RESTRICTIONS: Allow a minimum of 5 days between sequential applications. Maximum total application
rate of this product for ALL postemergence (in-crop) applications in hybrid canola seed production fields,
including application for weed control and control of non-glyphosate-tolerant canola, is 20 fluid ounces per
acre.
12.3 Canola with Roundup Ready Technology (Winter Varieties)
The directions for use of this product provided in this section are specific to canola containing Event RT73,
which includes Canola with Roundup Ready Technology.
For directions for use of this product on canola with TruFlex Technology, refer to that section of this label.
DO NOT combine these directions for use on canola with Roundup Ready Technology with the directions
for use on canola with TruFlex Technology.
Winter canola with Roundup Ready Technology is defined as those canola varieties with Roundup Ready
Technology that are seeded in early-fall and harvested the following spring or summer. Winter canola
varieties are intended to enter a cold period dormancy in the winter.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 63 of 165 Revised June 2021
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for the maximum application rates of this product with
winter varieties of canola with Roundup Ready Technology.
Maximum Application Rates
Total for all Preplant, At-Planting, Preemergence applications 40 fluid ounces per acre
Total for all In-crop applications from emergence to canopy closure
or prior to bolting in the spring 40 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting winter canola with
Roundup Ready Technology.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 40 fluid ounces per acre.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied postemergence (in-crop) to winter varieties of canola
with Roundup Ready Technology from emergence to canopy closure in the fall and prior to bolting in the
spring. Application made during or after bolting could result in crop injury and yield loss. To maximize yield
potential, eliminate competing weeds early.
Some weeds with multiple germination times, or suppressed (stunted) weeds, or weeds that have
overwintered, might need a sequential application of this product for control. Make the second application
after some re-growth has occurred and a minimum of 60 days after the initial application of this product.
Single Application – Apply 15 to 20 fluid ounces of this product per acre in the fall when weeds are small
and actively growing. Use a higher application rate within this range when weed densities are high, when
weeds have overwintered or when weeds become large and well established. Application of more than 15
fluid ounces per acre prior to the 6-leaf stage could result in reduced crop growth in the fall. Avoid spray
overlaps as this could result in temporary yellowing and/or growth reduction.
Sequential Application – Apply 10 to 20 fluid ounces of this product per acre to 2-leaf or larger canola in
the fall, followed by a second application at the same rate and at a minimum interval of 60 days, but before
bolting in the spring. Sequential application works best for control of early-emerging annual weeds and
winter emerging weeds, such as downy brome, jointed goatgrass and ryegrass, and for weeds that have
overwintered. This product will control or suppress most perennial weeds. For some perennial weeds, a
sequential application might be needed to reduce competition with the crop.
RESTRICTIONS: No more than two over-the-top broadcast applications may be made from crop
emergence up to the onset of bolting, and the total in-crop application must not exceed 40 fluid ounces of
this product per acre. Allow a minimum of 60 days between application and harvest of canola grain. No
waiting period is required between application and open grazing of livestock.
12.4 Canola with TruFlex Technology (Spring Varieties)
The directions for use of this product provided in this section are specific to canola containing Event MON
88302, which includes Canola with Roundup Ready Technology.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 64 of 165 Revised June 2021
Spring canola with TruFlex Technology is defined as those varieties of canola with TruFlex Technology that
are seeded in the spring and harvested in the fall and do not enter a period of winter dormancy.
The directions for use provided in this section are specific to and may only be used with varieties
designated as canola with TruFlex Technology. Applications described in this section made over the
top of canola that is not designated as canola with TruFlex Technology could cause serious crop injury and
reduced yields. DO NOT combine these directions for use with those in the “Canola with Roundup Ready
Technology (Spring Varieties)” section of this label or with any other directions for use on canola on labeling
for this or any other glyphosate-containing product. Drift of this product from an application made to canola
with TruFlex Technology onto adjacent fields of canola with Roundup Ready Technology could cause
extensive crop injury.
TYPES OF APPLICATION : Preplant; At-Planting; Preemergence; Postemergence (In-crop);
Postemergence (In-crop) in Hybrid Seed Production Only
USE INSTRUCTIONS: Refer to the following table for the maximum application rates of this product with
spring varieties of canola with TruFlex Technology.
Maximum Application Rates
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from emergence through harvest 40 fluid ounces per acre
Total for all In-crop applications from emergence through the 6-leaf
stage 40 fluid ounces per acre
Total for all In-crop applications from the 6-leaf stage through first-
flower 20 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: Up to 3.125 quarts of this product may be applied before, during or after planting
spring varieties of canola with TruFlex Technology.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied postem ergence (in-crop) to spring varieties of canola
with TruFlex Technology from emergence through the first-flower stage of development. To maximize yield
potential, eliminate competing weeds early.
For control of Canada thistle and morning glory, apply 40 fluid ounces of this product per acre no later than
the 6-leaf stage of canola development. For control of wild buckwheat over 2 inches in size, make sequential
applications of 20 fluid ounces followed by 20 fluid ounces of this product per acre. For control of other
annual weeds, apply up to 40 fluid ounces of this product per acre no later than the 6-leaf stage or up to 20
fluid ounces after the 6-leaf stage through first-flower.
RESTRICTIONS: No more than two in-crop (over-the-top) broadcast applications may be made from crop
emergence through the first-flower stage of canola development and the total in-crop application must not

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 65 of 165 Revised June 2021
exceed 40 fluid ounces of this product per acre. No more than 20 fluid ounces of this product may be applied
in-crop after the 6-leaf stage.
Postemergence (In-crop) in Hybrid Seed Production Only [This section is optional on the final printed
label]
THIS POSTEMERGENCE APPLICATION IS FOR USE ONLY IN HYBRID CANOLA SEED PRODUCTION
OF BOTH SPRING AND WINTER VARIETIES. DO NOT MAKE THIS APPLICATION ON CANOLA
GROWN FOR FOOD OR FEED.
This product may be applied at a rate of between 10 and 20 fluid ounces per acre from emergence until
pollination is complete or near completion for the control of non-glyphosate-tolerant canola pollen parental
line(s) in hybrid canola seed production fields containing both canola with Roundup Ready or TruFlex
Technology line(s) and non-glyphosate-tolerant line(s). Sequential applications may be made for the control
of non-glyphosate-tolerant pollen parental lines up to a maximum total application rate of 20 fluid ounces
per acre.
RESTRICTIONS: Allow a minimum of 5 days between sequential applications. Maximum total application
rate of this product for ALL postemergence (in-crop) applications in hybrid canola seed production fields,
including application for weed control and control of non-glyphosate-tolerant canola, is 20 fluid ounces per
acre.
12.5 Field Corn Hybrids with Roundup Ready 2 Technology
The directions for use of this product provided in this section are specific to field corn hybrids containing
Event NK603, MON 88017 or MON 87411, which includes Roundup Ready Corn 2, field corn hybrids with
Roundup Ready 2 Technology, and field corn seed products displaying the Roundup Ready 2 Technology
logo.
The directions for use in this section refer only to FIELD CORN hybrids with Roundup Ready 2 Technology.
For directions for use on SWEET CORN hybrids that contain Roundup Ready 2 Technology, see the “Sweet
Corn Hybrids with Roundup Ready 2 Technology” section of this label.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Spot
Application; Preharvest; Post-Harvest; Postemergence (In-crop) for Tassel Control in Roundup
Hybridization Systems Only
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with field
corn hybrids with Roundup Ready 2 Technology
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Maximum single In-crop application rate up to 48-inch corn 30 fluid ounces per acre
Total for all In-crop applications from emergence through 48-inch corn 60 fluid ounces per acre
Maximum Preharvest application rate after maximum kernel fill is
complete and the crop is physiologically mature (black layer formation)
until 7 days before harvest*
20 fluid ounces per acre
*See RESTRICTIONS section for Preharvest application
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 66 of 165 Revised June 2021
PRECAUTIONS: The use of the in-crop (over-the-top) application rates described in this section on other
than field corn hybrids with Roundup Ready 2 Technology could cause crop injury and reduced yields.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting field corn hybrids with Roundup Ready 2 Technology.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application prior to emergence of field corn. It is the responsibility of the pesticide user to
ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr;
dimethenamid; dimethenamid-P; flufenacet; flumetsulam; flumiclorac pentyl ester; fluthiacet-
methyl; isoxaflutole; linuron; mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; rimsulfuron; saflufenacil; tembotrione; thiencarbazone-methyl
Axiom DF (EPA Reg. No. 264-766; metribuzin, flufenacet); Balance Flexx (EPA Reg. No. 264-
1067; isoxaflutole); Capreno (EPA Reg. No. 264-1063; tembotrione, thiencarbazone-methyl );
Corvus (EPA Reg. No. 264-1066; isoxaflutole, thiencarbazone-methyl); Degree Xtra (EPA Reg.
No. 524-511; acetochlor, atrazine ); DiFlexx (EPA Reg. No. 264-1173; dicamba); DiFlexx DUO
(EPA Reg. No. 264-1184; dicamba, tembotrione); Harness (EPA Reg. No. 524-473; acetochlor);
Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine); Harness Xtra 5.6L (EPA Reg. No.
524-485; acetochlor, atrazine); Harness MAX (EPA Reg. No. 524-636; acetochlor, mesotrione);
TripleFLEX II (EPA Reg. No. 524-614; acetochlor, clopyralid, flumetsulam)
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Anthem; Anthem Maxx; Anthem Flex; Anthem
ATZ; Aim EC; Aim EW;Axiom DF; Balance Flexx; Banvel; Banvel 480; Bicep II MAGNUM; Bicep II
MAGNUM FC; Bicep Lite II MAGNUM; Callisto; Capreno; Cinch; Cinch ATZ; Cinch ATZ Lite;
Clarity; Corvus; Degree Xtra; DiFlexx; DiFlexx DUO; Distinct; Dual MAGNUM; Dual II MAGNUM;
FulTime; FulTime NXT; Guardsman MAX; Harness; Harness Xtra; Harness Xtra 5.6L; Harness
MAX; Hornet WDG Broadleaf Blend; Keystone; Keystone LA; Keystone LA NXT; Keystone NXT;
Leadoff; Linex 4L; Lorox DF; Marksman; Me-Too-Lachlor II; Outlook; Prowl 3.3 EC; Prowl H2O;
Python WDG; Resicore; Resolve DF; Resolve Q; Resolve SG; Resource; Shark EW; Shark H2O;
Sharpen Powered by Kixor; Stalwart; Stalwart C; Stalwart Xtra; Surpass EC; Surpass NXT;
TopNotch; TripleFLEX II; Verdict powered by Kixor; Zidua]
For maximum weed control, make a postemergence (in-crop) application of this product following the use
of a preemergence residual product listed above.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season. Application of 2,4-D or dicamba
must be made a minimum of 7 days prior to planting corn.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix over the top of field corn hybrids
with Roundup Ready 2 Technology from emergence through the V8 stage (8 leaves with collars), or until

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 67 of 165 Revised June 2021
corn plant height reaches 30 inches (freestanding), whichever comes first, unless otherwise directed. Use
drop nozzles for optimum spray coverage and weed control when corn plant height is 24 to 30 inches.
When corn plants are 30 to 48 inches tall (freestanding), apply this product using only ground application
equipment fitted with drop nozzles aligned to avoid spraying into the whorls of the corn plants. Maximum
single in-crop application rate of this product up to 48-inch field corn is 30 fluid ounces per acre. Total in-
crop application of this product from corn plant emergence through 48 inches in height must not exceed 60
fluid ounces per acre.
When applied as directed, this product will control annual grasses and broadleaf weeds listed on this label.
Many perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications
of this product. Make a postemergence application of 15 to 20 fluid ounces of this product per acre before
weeds exceed 4 inches in height (before they become competitive with the crop). Repeat this application
before new flushes of weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below, [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application postemergence (in-crop) to field corn. Read and follow label directions for all
products added to the mix. Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture. [Optional text, only required if the product information is not
included in the list below: For more information on the products listed below, see the “TANK-MIX PRODUCT
INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr;
flumetsulam; flumiclorac pentyl ester; halosulfuron-methyl; isoxaflutole; mesotrione; nicosulfuron;
rimsulfuron; tembotrione; thiencarbazone-methyl; thifensulfuron methyl; topramezone
Capreno (EPA Reg. No. 264-1063; tembotrione, thiencarbazone-methyl); Corvus (EPA Reg. No.
264-1066; isoxaflutole, thiencarbazone-methyl); Degree Xtra (EPA Reg. No. 524-511; acetochlor,
atrazine); DiFlexx (EPA Reg. No. 264-1173; dicamba); DiFlexx DUO (EPA Reg. No. 264-1184;
dicamba, tembotrione); Harness (EPA Reg. No. 524-473; acetochlor); Harness MAX (EPA Reg.
No. 524-636; acetochlor, mesotrione); Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine);
Harness Xtra 5.6L (EPA Reg. No. 524-485; acetochlor, atrazine); Laudis (EPA Reg. No. 264-860;
tembotrione); TripleFLEX II (EPA Reg. No. 524-614; acetochlor, clopyralid, flumetsulam); Warrant
(EPA Reg. No. 524-591; acetochlor)
Acuron; Acuron Flexi; Aim EC; Aim EW; Banvel; Banvel 480; Basis; Basis Blend; Callisto; Callisto
Xtra; Capreno; Clarity; Corvus; Degree Xtra; DiFlexx; DiFlexx DUO; Distinct; Harness; Harness
MAX; Harness Xtra; Harness Xtra 5.6L; Hornet WDG Broadleaf Blend; Impact; ImpactZ; Laudis;
Marksman; Realm Q; Resicore; Resolve DF; Resolve Q; Resolve SG; Resource; Shark EW; Shark
H2O; Status; Stinger; TripleFLEX II; Warrant]
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this product. Allow a
minimum of 50 days between application of this product and harvest of corn forage or grain.
Preharvest
USE INSTRUCTIONS: Up to 20 fluid ounces of this product per acre may be applied for annual and
perennial weed control prior to harvest when kernel fill is complete and the corn is physiologically mature
(black layer formed) and grain moisture is 35 percent or less.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 68 of 165 Revised June 2021
RESTRICTIONS: A preharvest application may be made only if the combined total of previously applied
over-the-top or drop nozzle applications does not exceed 40 fluid ounces of this product per acre. Allow a
minimum of 7 days between application and harvest or feeding of corn stover or grain.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after crop harvest. Higher application
rates might be needed for control of large weeds that were growing in the field at the time of harvest. Tank
mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled for post-harvest
application in field corn. Read and follow label directions for all products added to the mix.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest or the feeding of vegetation
within the application area. Application must be made a minimum of 30 days prior to the planting of any
crop not listed on this label.
Postemergence (In-crop) for Tassel Control in Roundup Hybridization Systems Only [This section is
optional on the final printed label]
THIS APPLICATION IS FOR USE ONLY IN S EED PRODUCTION OF CORN HYBRIDS USING THE
ROUNDUP HYBRIDIZATION SYSTEM (RHS). DO NOT MAKE THIS APPLICATION ON CORN GROWN
FOR FOOD OR FEED.
The RHS designation indicates that the corn contains Bayer CropScience proprietary gene technology that
allows for tassel-only susceptibility to this product. Use of this product on corn hybrids or inbreds that are
not designated as RHS or as corn containing Roundup Ready 2 Technology could result in severe crop
injury and yield loss.

USE INSTRUCTIONS: This product may be applied at rates of between 10 and 30 fluid ounces per acre
as an over-the-top broadcast application for tassel control in RHS-based seed corn production fields from
the V8 stage until either the V13 stage or 100 GDU (Growing Degree Units) before flowering.
RESTRICTIONS: Make no more than two applications of this product for tassel control. The maximum total
application rate of this product for tassel control is 60 fluid ounces. The maximum combined total amount
of this product that may be applied per year for both weed control and tassel control is 5 quarts per acre.

12.6 Sweet Corn Hybrids with Roundup Ready 2 Technology
The directions for use of this product provided in this section are specific to sweet corn hybrids containing
Event MON 88017, which includes sweet corn hybrids with Roundup Ready 2 Technology and sweet corn
seed products displaying the Roundup Ready 2 Technology logo.
The directions for use in this section apply only to SWEET CORN hybrids with Roundup Ready 2
Technology. For directions for use on FIELD CORN hybrids that contain Roundup Ready 2 Technology,
see the “Field Corn Hybrids with Roundup Ready 2 Technology” section of this label.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with sweet
corn hybrids with Roundup Ready 2 Technology.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Maximum single In-crop application rate up to 48-inch sweet corn 40 fluid ounces per acre
Total for all In-crop applications from emergence through 48-inch
sweet corn 124 fluid ounces per acre

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 69 of 165 Revised June 2021
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
PRECAUTIONS: The use of the in-crop (over-the-top) applications described in this section on other than
sweet corn hybrids with Roundup Ready 2 Technology could cause crop injury and reduced yields.

Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting sweet corn hybrids with Roundup Ready 2 Technology.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] for maximum weed control.
Ensure that the product used is labeled for application prior to emergence of sweet corn. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank
mixture. Apply these tank mixtures in 10 to 20 gallons of water or in 10 to 60 gallons of nitrogen solution
per acre. [Optional text, only required if the product information is not included in the list below: For more
information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this
label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; atrazine; bicylopyrone; carfentrazone-ethyl; dimethenamid-p; mesotrione; metolachlor;
s-metolachlor
Degree Xtra (EPA Reg. No. 524-511; acetochlor, atrazine ); Harness (EPA Reg. No. 524-473;
acetochlor); Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine); Harness Xtra 5.6L (EPA
Reg. No. 524-485; acetochlor, atrazine)
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Aim EC; Aim EW; Bicep II MAGNUM; Bicep II
MAGNUM FC; Bicep Lite II MAGNUM; Cinch; Cinch ATZ; Degree Xtra; Dual MAGNUM; Dual II
Magnum; FulTime; Guardsman MAX; Harness; Harness Xtra; Harness Xtra 5.6L; Keystone;
Keystone LA; Keystone LA NXT; Keystone NXT; Me-Too-Lachlor II; Outlook; TopNotch]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: Apply this product alone or in a tank mixture over the top of sweet corn hybrids with
Roundup Ready 2 Technology from emergence through the V8 stage (8 leaves with collars), or until sweet
corn plant height reaches 30 inches (freestanding), whichever comes first. Use drop nozzles for optimum
spray coverage and weed control when sweet corn plant height is 24 to 30 inches. When sweet corn plants
are 30 to 48 inches tall (freestanding), apply this product using only ground application equipment fitted
with drop nozzles aligned to avoid spraying into the whorls of the sweet corn plants. Avoid spraying if the
crop has reached the reproductive stage. Maximum single in-crop application rate of this product up to 48-
inch sweet corn is 40 fluid ounces per acre. Total in-crop application of this product from emergence
through 48 inches in height must not exceed 124 fluid ounces per acre per growing season.
When applied as directed, this product will control annual grasses and broadleaf weeds listed on this label.
Many perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 70 of 165 Revised June 2021
of this product. Apply 15 to 20 fluid ounces of this product per acre before weeds exceed 4 inches in height
or before they become competitive with the crop. If new flushes of weeds occur, a sequential application of
15 to 20 fluid ounces per acre may be made before weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application postemergence (in-crop) to sweet corn. It is the responsibility of the pesticide user
to ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
atrazine; carfentrazone-ethyl; mesotrione; tembotrione; topramezone
Laudis (EPA Reg. No. 264-860; tembotrione)
AAtrex 4L; AAtrex Nine-O; Aim EC; Aim EW; Callisto; Callisto Xtra; Impact; Laudis]
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this product. Do not apply
atrazine in a tank-mix with this product when sweet corn plants are greater than 12 inches tall. Allow a
minimum of 30 days between application of this product and harvest of sweet corn forage or grain.
12.7 Field Corn Hybrids with Agrisure GT Technology
The directions for use of this product provided in this section are specific to field corn hybrids containing
Event GA21, which includes field corn hybrids with Agrisure GT Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Spot
Application; Preharvest; Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with field
corn hybrids with Agrisure GT Technology
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Maximum single In-crop application rate up to 48-inch corn 20 fluid ounces per acre
Total for all In-crop applications from emergence through 48-inch corn 40 fluid ounces per acre
Maximum Preharvest application rate after maximum kernel fill is
complete and the crop is physiologically mature (black layer formation)
until 7 days before harvest*
20 fluid ounces per acre
*See RESTRICTIONS section for Preharvest application
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
PRECAUTIONS: The use of the in-crop (over-the-top) rates described in this section on other than field
corn hybrids with Agrisure GT Technology could cause crop injury and reduced yields.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 71 of 165 Revised June 2021
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied alone or in a tank mixture before, during or after
planting field corn hybrids with Agrisure GT Technology.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below, [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application prior to emergence of field corn. It is the responsibility of the pesticide user to
ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. Apply these tank mixtures in 10 to
20 gallons of water, or 10 to 60 gallons of nitrogen solution, per acre. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr;
dimethenamid; dimethenamid-P; flufenacet; flumetsulam; flumiclorac pentyl ester; fluthiacet-
methyl; isoxaflutole; linuron; mesotrione; metolachlor; s-metolachlor; metribuzin; pendimethalin;
pyroxasulfone; rimsulfuron; saflufenacil; tembotrione; thiencarbazone-methyl
Axiom DF (EPA Reg. No. 264-766; metribuzin, flufenacet); Balance Flexx (EPA Reg. No. 264-
1067; isoxaflutole); Capreno (EPA Reg. No. 264-1063; tembotrione, thiencarbazone-methyl );
Corvus (EPA Reg. No. 264-1066; isoxaflutole, thiencarbazone-methyl); Degree Xtra (EPA Reg.
No. 524-511; acetochlor, atrazine ); DiFlexx (EPA Reg. No. 264-1173; dicamba); DiFlexx DUO
(EPA Reg. No. 264-1184; dicamba, tembotrione); Harness (EPA Reg. No. 524-473; acetochlor);
Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine); Harness Xtra 5.6L (EPA Reg. No.
524-485; acetochlor, atrazine); Harness MAX (EPA Reg. No. 524-636; acetochlor, mesotrione);
TripleFLEX II (EPA Reg. No. 524-614; acetochlor, clopyralid, flumetsulam)
AAtrex 4L; AAtrex Nine-O; Acuron; Acuron Flexi; Anthem; Anthem Maxx; Anthem Flex; Anthem
ATZ; Aim EC; Aim EW; Axiom DF; Balance Flexx; Banvel; Banvel 480; Bicep II MAGNUM; Bicep
II MAGNUM FC; Bicep Lite II MAGNUM; Callisto; Capreno; Cinch; Cinch ATZ; Cinch ATZ Lite;
Clarity; Corvus; Degree Xtra; DiFlexx; DiFlexx DUO; Distinct; Dual MAGNUM; Dual II MAGNUM;
FulTime; FulTime NXT; Guardsman MAX; Harness; Harness Xtra; Harness Xtra 5.6L; Harness
MAX; Hornet WDG Broadleaf Blend; Keystone; Keystone LA; Keystone LA NXT; Keystone NXT;
Leadoff; Linex 4L; Lorox DF; Marksman; Me-Too-Lachlor II; Outlook; Prowl 3.3 EC; Prowl H2O;
Python WDG; Resicore; Resolve DF; Resolve Q; Resolve SG; Resource; Shark EW; Shark H2O;
Sharpen Powered by Kixor; Stalwart; Stalwart C; Stalwart Xtra; Surpass EC; Surpass NXT;
TopNotch; TripleFLEX II; Verdict powered by Kixor; Zidua
For maximum weed control, make a postemergence (in-crop) application of this product following the use
of a preemergence residual product listed above.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season. Application of 2,4-D or dicamba
must be made a minimum of 7 days prior to planting corn.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied alone or in a tank-mix over the top of field corn hybrids
with Agrisure GT Technology from emergence through the V8 stage (8 leaves with collars), or until corn
plant height reaches 30 inches (freestanding), whichever comes first, unless otherwise directed. Maximum

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 72 of 165 Revised June 2021
single in-crop application rate of this product is 20 fluid ounces per acre. Total in-crop application of this
product from corn plant emergence through V8 stage or 30 inches in height must not exceed 40 fluid ounces
per acre.
When applied as directed, this product will control annual grasses and broadleaf weeds listed on this label.
Many perennial grasses and broadleaf weeds will be controlled or suppressed with one or more applications
of this product. Make a postemergence application of 15 to 20 fluid ounces of this product per acre before
weeds exceed 4 inches in height (before they become competitive with the crop). Repeat this application
before new flushes of weeds exceed 4 inches in height.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below, [Optional text:, or one or more of the products listed]. Ensure that the product used
is labeled for application prior to emergence of field corn. It is the responsibility of the pesticide user to
ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; acetochlor; atrazine; bicyclopyrone; carfentrazone-ethyl; clopyralid; dicamba; diflufenzopyr;
flumetsulam; flumiclorac pentyl ester; halosulfuron-methyl; isoxaflutole; mesotrione; nicosulfuron;
rimsulfuron; tembotrione; thiencarbazone-methyl; thifensulfuron methyl; topramezone
Capreno (EPA Reg. No. 264-1063; tembotrione, thiencarbazone-methyl); Corvus (EPA Reg. No.
264-1066; isoxaflutole, thiencarbazone-methyl); Degree Xtra (EPA Reg. No. 524-511; acetochlor,
atrazine); DiFlexx (EPA Reg. No. 264-1173; dicamba); DiFlexx DUO (EPA Reg. No. 264-1184;
dicamba, tembotrione); Harness (EPA Reg. No. 524-473; acetochlor); Harness MAX (EPA Reg.
No. 524-636; acetochlor, mesotrione); Harness Xtra (EPA Reg. No. 524-480; acetochlor, atrazine);
Harness Xtra 5.6L (EPA Reg. No. 524-485; acetochlor, atrazine); Laudis (EPA Reg. No. 264-860;
tembotrione); TripleFLEX II (EPA Reg. No. 524-614; acetochlor, clopyralid, flumetsulam); Warrant
(EPA Reg. No. 524-591; acetochlor)
Acuron; Acuron Flexi; Aim EC; Aim EW; Banvel; Banvel 480; Basis; Basis Blend; Callisto; Callisto
Xtra; Capreno; Clarity; Corvus; Degree Xtra; DiFlexx; DiFlexx DUO; Distinct; Harness; Harness
MAX; Harness Xtra; Harness Xtra 5.6L; Hornet WDG Broadleaf Blend; Impact; ImpactZ; Laudis;
Marksman; Realm Q; Resicore; Resolve DF; Resolve Q; Resolve SG; Resource; Shark EW; Shark
H2O; Status; Stinger; TripleFLEX II; Warrant]
PRECAUTIONS: In-crop applications of this product made alone or with the addition of other crop chemical
products could result in crop response. Contact your seed trait provider for more information.
RESTRICTIONS: Allow a minimum of 10 days between in-crop applications of this product. Allow a
minimum of 50 days between application of this product and harvest of corn forage or grain.
Preharvest
USE INSTRUCTIONS: Up to 20 fluid ounces of this product per acre may be applied for annual and
perennial weed control prior to harvest when kernel fill is complete and the corn is physiologically mature
(black layer formed) and grain moisture is 35 percent or less.
RESTRICTIONS: A preharvest application may be made only if the combined total of previously applied
over-the-top or drop nozzle applications does not exceed 40 fluid ounces of this product per acre. Allow a
minimum of 7 days between application and harvest or feeding of corn stover or grain.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 73 of 165 Revised June 2021
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after crop harvest. Higher application
rates might be needed for control of large weeds that were growing in the field at the time of harvest. Tank
mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled for post-harvest
application in field corn. Read and follow label directions for all products added to the mix.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest or the feeding of vegetation
within the application area. Application must be made a minimum of 30 days prior to the planting of any
crop not listed on this label.
12.8 Cotton with Roundup Ready Technology
The directions for use of this product provided in this section are specific to cotton containing Event MON
1445, which includes cotton with Roundup Ready Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Selective
Equipment Application (In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with cotton
with Roundup Ready Technology.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking to layby 2.5 quarts per acre
Maximum Preharvest application rate 40 fluid ounces per acre
Combined total for all In-crop applications from emergence through
harvest 3.75 quarts per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton with Roundup
Ready Technology.

TANK MIXTURES: This product may be tank-mixed with 2,4-D and/or dicamba and applied prior to planting
only. This product may be tank-mixed with products containing one or more of the active ingredients listed
below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to the emergence of cotton. It is the responsibility of
the pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen; metolachlor; s-metolachlor;
norflurazon; pendimethalin; prometyrn; pyrithiobac-sodium; saflufenacil

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 74 of 165 Revised June 2021
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Direx 4L; Dual MAGNUM; Dual II MAGNUM;
Karmex DF; Prowl 3.3 EC; Prowl H2O; Reflex; Sharpen Powered by Kixor; Stalwart; Staple LX;
Valor SX; Warrant; Warrant Ultra]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of cotton with Roundup Ready Technology
(in-crop) at rates of up to 20 fluid ounces per acre per application from cracking until the 4-leaf (node) stage
of development (until the fifth true leaf reaches the size of a quarter). NO MORE THAN TWO OVER-THE-
TOP BROADCAST APPLICATIONS MAY BE MADE FROM CROP EMERGENCE THROUGH THE 4-
LEAF (NODE) STAGE OF DEVELOPMENT. SEQUENTIAL OVER-THE-TOP OR POST-DIRECTED
APPLICATIONS OF THIS PRO DUCT IN-CROP MUST BE A MI NIMUM OF 10 DAYS APART AND
COTTON MUST HAVE AT LEAST TWO NODES OF INCREMENTAL GROWTH BETWEEN
APPLICATIONS. Over-the-top application made after the 4-leaf (node) stage of development could result
in boll loss, delayed maturity and/or yield loss.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [ Optional text:, or one or more of the products listed,] and applied over the top of
cotton with Roundup Ready Technology up to the 4-leaf stage. Ensure that the product used is labeled for
application postemergence (in-crop) to cotton. It is the responsibility of the pesticide user to ensure that the
intended use is included on the label of all products added to a tank mixture. Read and follow label directions
for all products added to the mix. Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture. [Optional text, only required if the product information is not
included in the list below: For more information on the products listed below, see the “TANK-MIX PRODUCT
INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; fluazifop-p-butyl; metolachlor; s-metolachlor; monosodium acid
methanearsonate; pyrithiobac-sodium; quizalofop-p-ethyl; sethoxydim; trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor)
Assure II; Dual MAGNUM; Dual II MAGNUM; Envoke; Fusilade DX; MSMA 6 Plus; MSMA 6.6;
Poast; Poast Plus; Select 2 EC; Select Max Herbicide with Inside Technology; Stalwart; Staple LX;
Warrant]
[Optional text: Staple LX (EPA Reg. No. 352-613; pyrithiobac-sodium) could cause leaf yellowing
and/or leaf crinkling when applied postemergence (in-crop) to cotton with Roundup Ready
Technology.]
[Optional text: [Dual MAGNUM (EPA Reg. No. 100-816; s-metolachlor), Dual II MAGNUM (EPA
Reg. No. 100-818; s-metolachlor), and Stalwart (EPA Reg. No. 60063-24; metolachlor)] applied
over the top of cotton with Roundup Ready Technology could cause leaf injury in the form of
necrotic spotting.]
Salvage Treatment – Application of up to 20 fluid ounces of this product per acre either as an over-the-top
application or as a post-directed application sprayed higher on the cotton plants and onto the targeted

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 75 of 165 Revised June 2021
weeds may be made after the 4-leaf stage of development only when weeds threaten to cause the loss of
the crop.
IN THE STATE OF ARIZONA ONLY, up to 30 fluid ounces of this product may be applied per acre either
as an over-the-top application or a post-directed application for salvage treatment.
NOTE: SALVAGE TREATMENT WILL RESULT IN SIGNIFICANT BOLL LOSS, DELAYED MATURITY
AND/OR YIELD LOSS. NO MORE THAN ONE SALVAGE TREATMENT MAY BE MADE PER GROWING
SEASON.
RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from
cracking to layby combined is 2.5 quarts per acre per season. Allow a minimum of 7 days between
application and harvest of cotton. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES
CONTAINING SURFACTANT TO THIS PRODUCT (OTHER THAN THOSE CONTAINED IN ANY TANK-
MIX PRODUCT) FOR OVER-THE-TOP APPLICA TION TO COTTON WITH ROUNDUP READY
TECHNOLOGY.
Selective Equipment Application (In-crop)
USE INSTRUCTIONS: This product may be applied usin g precision post-directed or hooded sprayers at
rates of up to 20 fluid ounces per acre per application to cotton with Roundup Ready Technology through
layby. At this crop stage, use post-directed application equipment to direct the spray towards the base of
the cotton plants, avoiding contact of the herbicide spray with the leaves of the plant. To minimize contact,
maintain a low sprayer pressure (less than 30 pounds per square inch) and place nozzles in a low position
directing a horizontal spray pattern under the leaves of the cotton plant and onto targeted weeds in the row.
For optimal control, apply this product while weeds are small (less than 3 inches in height).
 See additional
use instructions in the “APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] for in-crop application using
precision post-directed or hooded sprayers. Ensure that the product used is labeled for application
postemergence (in-crop) to cotton. It is the responsibility of the pesticide user to ensure that the intended
use is included on the label of all products added to a tank mixture. Read and follow label directions for all
products added to the mix. Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture. [Optional text, only required if the product information is not
included in the list below: For more information on the products listed below, see the “TANK-MIX PRODUCT
INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron; fomesafen; linuron; metolachlor;
monosodium acid methanearsonate; pendimethalin; prometyrn; pyrithiobac-sodium;
trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Aim EC; Aim EW; Caparol 4L; Cotoran 4L; Direx 4L; Envoke; MSMA 6 Plus; MSMA 6.6; Prowl 3.3
EC; Prowl H2O; Staple LX; Valor SX; Warrant; Warrant Ultra]
[Optional text: Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) to cotton with Roundup Ready Technology.]
RESTRICTIONS: Maximum quantity of this product that may be applied for all in-crop applications from
cracking to layby combined is 2.5 quarts per acre per season. Allow a minimum of 7 days between

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 76 of 165 Revised June 2021
application and harvest of cotton. NO MORE TH AN TWO APPLICATIONS OF THIS PRODUCT MAY BE
MADE FROM THE 5-LEAF STAGE THROUGH LAYBY. SEQUENTIAL OVER-THE-TOP OR POST-
DIRECTED IN-CROP APPLICATIONS OF THIS PRODUCT MUST BE A MINIMUM OF 10 DAYS APART
AND COTTON MUST HAVE AT LEAST TWO NO DES OF INCREMENTAL GROWTH BETWEEN
APPLICATIONS.
Preharvest
USE INSTRUCTIONS: Up to 40 fluid ounces of this product per acre may be applied for annual and
perennial weed control prior to crop harvest after 20 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to cotton with Roundup
Ready Technology.
PRECAUTIONS: Application of this product for preharvest weed control to cotton grown for seed could
result in a reduction in germination or vigor. To the extent consistent with applicable law, buyer and all users
are responsible for such loss or damage in connection with the preharvest use of this product on cotton
with Roundup Ready Technology grown for seed.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton. DO NOT ADD
ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS PRODUCT FOR
PREHARVEST APPLICATION TO COTTON WITH ROUNDUP READY TECHNOLOGY.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF CO TTON WITH ROUNDUP READY TECHNOLOGY.
HOWEVER, DUE TO THE SENSITIVITY OF CO TTON FRUITING TO VARIOUS ENVIRONMENTAL
CONDITIONS, AGRONOMIC PRACTICES AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE
ALL RISKS ASSOCIATED WITH THIS PRODUCT , EVEN WHEN APPLICATIONS ARE MADE IN
ACCORDANCE WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT
IN BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS.
12.9 Cotton with Roundup Ready Flex Technology and XtendFlex Technology
The directions for use of this product provided in this section are specific to cotton containing Event MON
88913, which includes cotton with Roundup Ready Flex Technology and cotton with XtendFlex Technology.
The directions for use of this product provided in this section are specific to and may only be used
with varieties designated as cotton with Roundup Ready Flex or XtendFlex Technology. Applications
described in this section made over the top of cotton other than cotton with Roundup Ready Flex or
XtendFlex Technology will cause crop injury and reduced yields. DO NOT combine the directions for use
in this section with those in the “Cotton with Roundup Ready Technology” or “Cotton with GlyTol
Technology” section of this label. Drift of this product from an application made to cotton with Roundup
Ready Flex or XtendFlex Technology onto adjacent fields of post 4-leaf (node) cotton with Roundup Ready
Technology or cotton with GlyTol Technology could cause extensive crop injury, including boll loss, delayed
maturity and/or yield loss.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with cotton
with Roundup Ready Flex or XtendFlex Technology.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking to 60 percent open bolls 3.75 quarts per acre

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 77 of 165 Revised June 2021
Maximum Application Rates
Total for all In-crop applications between layby and 60 percent open bolls 40 fluid ounces per acre
Total for all In-crop applications from 60 percent open bolls to 7 days prior
to harvest 40 fluid ounces per acre
Total for all In-crop applications from emergence through harvest 3.75 quarts per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton with Roundup
Ready Flex Technology.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may be tank-mixed with products containing one or more of the active ingredients listed
below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to emergence of cotton. It is the responsibility of the
pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen; metolachlor; s-metolachlor;
norflurazon; pendimethalin; prometyrn; pyrithiobac-sodium; saflufenacil
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Caparol 4L; Command 3ME; Cotoran 4L; Cotton Pro; Direx 4L; Dual MAGNUM; Dual II MAGNUM;
Karmex DF; Prowl 3.3 EC; Prowl H2O; Reflex; Sharpen Powered by Kixor; Stalwart; Staple LX;
Valor SX; Warrant; Warrant Ultra]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to control annual grasses and broadleaf weeds listed
on this label in cotton with Roundup Ready Flex or XtendFlex Technology. To maximize yield potential,
eliminate competing weeds early. Many perennial weeds will be controlled or suppressed with one or more
applications of this product. Make an initial application of 20 fluid ounces per acre to control or suppress 1-
to 3-inch-tall annual grasses and broadleaf weeds. This product may be applied postemergence to cotton
with Roundup Ready Flex or XtendFlex Technology using ground application equipment at rates up to 30
fluid ounces per acre per application. In addition to broadcast application, post-directed spray equipment
may be used to achieve more thorough weed coverage.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 78 of 165 Revised June 2021
IN THE STATES OF ARIZONA, NEW MEXICO AND TEXAS (WEST OF I-35) ONLY, up to 40 fluid ounces
of this product per acre may be applied per postemergence application using ground application equipment.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] and applied postemergence
(in-crop) over the top of cotton with Roundup Ready Flex or XtendFlex Technology.
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; fluazifop-p-butyl; metolachlor; s-metolachlor; monosodium acid
methanearsonate; pyrithiobac-sodium; quizalofop-p-ethyl; sethoxydim; trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor)
Assure II; Dual MAGNUM; Dual II MAGNUM; Envoke; Fusilade DX; MSMA 6 Plus; MSMA 6.6;
Poast; Poast Plus; Select 2 EC; Select Max Herbicide with Inside Technology; Stalwart; Staple LX;
Warrant]
[Optional text: Staple LX (EPA Reg. No. 352-613; pyrithiobac-sodium) could cause leaf yellowing
and/or leaf crinkling when applied postemergence (in-crop) in cotton with Roundup Ready Flex or
XtendFlex Technology.]
[Optional text: [Dual MAGNUM (EPA Reg. No. 100-816; s-metolachlor), Dual II MAGNUM (EPA
Reg. No. 100-818; s-metolachlor), and Stalwart (EPA Reg. No. 60063-24; metolachlor)] applied
over the top of cotton with Roundup Ready Flex or XtendFlex Technology could cause leaf injury
in the form of necrotic spotting.]
This product may be tank-mixed with products containing one or more of the active ingredients listed below
[Optional text:, or one or more of the products listed,] for in-crop application using precision post-directed
or hooded sprayers.
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron; fomesafen; linuron; metolachlor;
monosodium acid methanearsonate; pendimethalin; prometyrn; pyrithiobac-sodium;
trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Aim EC; Aim EW; Caparol 4L; Cotoran 4L; Direx 4L; Envoke; MSMA 6 Plus; MSMA 6.6; Prowl 3.3
EC; Prowl H2O; Staple LX; Valor SX; Warrant; Warrant Ultra]
[Optional text: Staple LX could cause leaf yellowing and/or leaf crinkling when applied
postemergence (in-crop) in cotton with Roundup Ready Flex or XtendFlex Technology.]
Ensure that the product used is labeled for application postemergence (in-crop) to cotton. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank
mixture. [Optional text, only required if the product information is not included in the list below: For more
information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this
label.]

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 79 of 165 Revised June 2021
RESTRICTIONS: The maximum single, in-crop application rate of this product to cotton with Roundup
Ready Flex or XtendFlex Technology using ground application equipment is 30 fluid ounces per acre,
except in Arizona, New Mexico, and west Texas (west of I-35 only), where up to 40 fluid ounces per acre
may be applied in a single application using ground application equipment. In-crop application rates
above 20 fluid ounces per acre made alone or with the addition of other crop chemical products
containing surfactant could cause a crop response including leaf speckling or leaf necrosis. Do not
exceed a maximum single, in-crop application rate of 20 fluid ounces of this product per acre when using
aerial application equipment, except in Arizona, New Mexico and west Texas (west of I-35 only), where up
to 30 fluid ounces may be applied as a single application using aerial application equipment. Between
layby and 60 percent open bolls, the maximum combined total application rate of this product is 40 fluid
ounces per acre. The combined total for all applications of this product made from crop emergence to 60
percent open bolls must not exceed 3.75 quarts per acre.
DO NOT ADD ADDITONAL SURFACTANT OR ADDI TIVES CONTAINING SURFACTANT TO THIS
PRODUCT FOR OVER-THE-TOP APPLICATION TO COTTON WITH ROUNDUP READY FLEX OR
XTENDFLEX TECHNOLOGY.
Preharvest
USE INSTRUCTIONS: Up to 40 fluid ounces of this product per acre may be applied to cotton with
Roundup Ready Flex or XtendFlex Technology for annual and perennial weed control prior to harvest after
60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to cotton with Roundup
Ready Flex or XtendFlex Technology.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton with Roundup
Ready Flex Technology. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING
SURFACTANT TO THIS PRODUCT FOR PREHARVEST APPLICATION TO COTTON WITH ROUNDUP
READY FLEX OR XTENDFLEX TECHNOLOGY.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF COTTON WITH ROUNDUP READY FLEX OR XTENDFLEX

TECHNOLOGY. HOWEVER, DUE TO THE SENSITIV ITY OF COTTON FRUITING TO VARIOUS
ENVIRONMENTAL CONDITIONS, AGRONOMIC PRACTICES AND OTHER FACTORS, IT IS
IMPOSSIBLE TO ELIMINATE ALL RISKS ASSO CIATED WITH THIS PRODUCT, EVEN WHEN
APPLICATIONS ARE MADE IN ACCORDANCE WITH THE LABEL DIRECTIONS. IN SOME CASES,
THESE FACTORS CAN RESULT IN BOLL LOSS, DELAYED MATURITY AND/OR YIELD LOSS.
12.10 Cotton with GlyTol Technology
The directions for use of this product provided in this section are specific to cotton containing Event
GHB614, which includes Cotton with GlyTol Technology.
The directions for use of this product provided in this section are specific to and may only be used
with varieties designated as cotton with GlyTol Technology. Applications described in this section
made over the top of cotton other than cotton with GlyTol Technology will cause crop injury and reduced
yields. DO NOT combine the directions for use in this section with those in the “Cotton with Roundup Ready
Technology” or “Cotton with Roundup Ready Flex Technology” section of this label. Drift of this product
from an application made to cotton with GlyTol Technology onto adjacent fields of post 4-leaf (node) cotton
with Roundup Ready Technology could cause extensive crop injury, including boll loss, delayed maturity
and/or yield loss.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with cotton
with GlyTol Technology.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 80 of 165 Revised June 2021
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking to 60 percent open bolls 3.75 quarts per acre
Total for all In-crop applications between layby and 60 percent open bolls 40 fluid ounces per acre
Total for all In-crop applications from 60 percent open bolls to 7 days prior
to harvest 40 fluid ounces per acre
Total for all In-crop applications from emergence through harvest 3.75 quarts per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton with GlyTol
Technology.

TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may be tank-mixed with one or more products containing the active ingredients listed
below, [Optional text: or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to emergence of cotton. It is the responsibility of the
pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products included on the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen; metolachlor; s-metolachlor;
norflurazon; pendimethalin; prometyrn; pyrithiobac-sodium; saflufenacil
Warrant Herbicide (EPA Reg. No. 524-591; acetochlor); Warrant Ultra Herbicide (EPA Reg. No.
524-620; acetochlor, fomesafen)]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to control annual grasses and broadleaf weeds listed
on this label in cotton with GlyTol Technology. To maximize yield potential, eliminate competing weeds
early. Many perennial weeds will be controlled or suppressed with one or more applications of this product.
Use an initial application rate of 20 fluid ounces per acre to control or suppress 1- to 3-inch tall annual
grasses and broadleaf weeds. This product may be applied postemergence to cotton with GlyTol
Technology using ground application equipment at rates up to 30 fluid ounces per acre per application. In
addition to broadcast application, post-directed spray equipment may be used to achieve more thorough
weed coverage.
IN THE STATES OF ARIZONA, NEW MEXICO, AND TEXAS (WEST OF I-35) ONLY, up to 40 fluid ounces
of this product per acre may be applied per postemergence application using ground application equipment.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 81 of 165 Revised June 2021
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below, or one or more of the products listed, and applied postemergence (in-crop) over
the top of cotton with GlyTol Technology.
[Active ingredients and products included on the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; fluazifop-p-butyl; metolachlor; s-metolachlor; monosodium acid
methanearsonate; pyrithiobac-sodium; quizalofop-p-ethyl; sethoxydim; trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor)]
This product may be tank-mixed with products containing one or more of the active ingredients listed below,
[Optional text: or one or more of the products listed,] for in-crop application using precision post-directed or
hooded sprayers.
[Active ingredients and products included on the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron; fomesafen; linuron; metolachlor;
monosodium acid methanearsonate; pendimethalin; prometyrn; pyrithiobac-sodium;
trifloxysulfuron-sodium
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg.
No. 524-620; acetochlor, fomesafen)]
Ensure that the product used is labeled for application postemergence (in-crop) to cotton. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix.
RESTRICTIONS: The maximum single, in-crop application rate of this product to cotton with GlyTol
Technology using ground application equipment is 30 fluid ounces per acre, except in Arizona, New Mexico
and west Texas (west of I-35 only), where up to 40 fluid ounces per acre may be applied in a single
application using ground application equipment. In-crop application rates above 20 fluid ounces per
acre made alone or with the addition of other crop chemical products containing surfactant could
cause a crop response including leaf speckling or leaf necrosis. Do not exceed a maximum single, in-
crop application rate of 20 fluid ounces of this product per acre when using aerial application equipment,
except in Arizona, New Mexico and west Texas (west of I-35 only), where up to 30 fluid ounces may be
applied as a single application using aerial application equipment. Between layby and 60 percent open
bolls, the maximum combined total application rate of this product is 40 fluid ounces per acre. The combined
total for all applications of this product made from crop emergence to 60 percent open bolls must not exceed
3.75 quarts per acre.
DO NOT ADD ADDITIONAL SURFACTANT OR A DDITIVES CONTAINING SURFACTANT TO THIS
PRODUCT FOR OVER-THE-TOP APPLICATION TO COTTON WITH GLYTOL TECHNOLOGY.
Preharvest
USE INSTRUCTIONS: Up to 40 fluid ounces of this product per acre may be applied to cotton with GlyTol
Technology for annual and perennial weed control prior to harvest after 60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to cotton with GlyTol
Technology.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton with GlyTol
Technology. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT
TO THIS PRODUCT FOR PREHARVEST APPLICATION TO COTTON WITH GLYTOL TECHNOLOGY.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 82 of 165 Revised June 2021
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF COTTON WITH GLYTOL TECHNOLOGY. HOWEVER, DUE TO
THE SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS,
AGRONOMIC PRACTICES AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS
ASSOCIATED WITH THIS PRO DUCT, EVEN WHEN APPLICATIONS ARE MADE IN ACCORDANCE
WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS,
DELAYED MATURITY AND/OR YIELD LOSS.
12.11 Soybean with Roundup Ready Technology
The directions for use of this product provided in this section are specific to soybean containing Event GTS
40-3-2, which includes soybean with Roundup Ready Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest;
Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
soybean with Roundup Ready Technology.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking through flowering
(R2 stage soybean) 60 fluid ounces per acre
Maximum Preharvest application rate 20 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting soybean with Roundup
Ready Technology.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may be tank-mixed with products containing one or more of the active ingredients listed
below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to emergence of soybean. It is the responsibility of the
pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone; cloransulam-methyl;
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron; metolachlor;
s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; saflufenicil; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 83 of 165 Revised June 2021
Axiom DF (EPA Reg. No. 264-766; metribuzin, flufenacet ); Warrant (EPA Reg. No. 524-591;
acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor, fomesafen)
Aim EC; Aim EW; Anthem; Anthem Maxx; Anthem Flex; Assure II; Authority Assist; Authority Elite;
Authority First DF; Authority MAXX; Authority MTZ DF; Authority Supreme; Authority XL; Axiom
DF; Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX; Classic; Cobra;
Command 3ME; Dual MAGNUM; Dual II MAGNUM; Enlite; Envive; Fierce; Fierce MTZ; Fierce XLT;
FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF; Mauler; Me-Too-Lachlor; Optill Powered by Kixor;
Outlook; Phoenix; Prefix; Prowl 3.3 EC; Prowl H2O; Pursuit; Python WDG; Reflex; Resource;
Select 2 EC; Select Max Herbicide with Inside Technology; Sharpen Powered by Kixor; Spartan
4F; Sonic; Treflan 4L; Treflan 4 EC; TriCor 4F; TriCor DF; Valor SX; Valor XLT; Verdict powered
by Kixor; Warrant; Warrant Ultra; Zidua; Zidua PRO Powered by Kixor; Zidua SC]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broadleaf weeds in
soybean with Roundup Ready Technology from emergence (cracking) through flowering (R2 stage
soybean). R2 stage soybean ends when a pod 5 millimeters (3/16 inch) long appears at one of the four
uppermost nodes on the main stem with a fully developed leaf (R3 stage). Refer to the “ANNUAL WEEDS
RATE SECTION” of this label for application rates for specific annual weeds. An initial application of 20
fluid ounces of this product per acre will control or suppress most 2- to 8-inch tall weeds, which are normally
found approximately 2 to 5 weeks after planting. If the initial application is delayed and weeds are larger,
apply a higher rate of this product. This product may be applied up to 40 fluid ounces per acre as a single,
in-crop application for control of annual weeds and where dense weed populations exist.
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or
suppress perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed,
hemp dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine,
trumpetcreeper, swamp smartweed and wirestem muhly. For optimal spray coverage and weed control,
allow perennial weed species to achieve at least 6 inches of growth before applying this product.
Under adverse growing conditions, including drought, hail or wind damage, or a poor soybean stand that
slows or delays canopy closure, a sequential application of this product might be necessary to control late
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT
WILL BE NEEDED TO CONTROL NEW FLUSHES OF WEEDS IN THE SOYBEAN WITH ROUNDUP
READY TECHNOLOGY CROP. To control giant ragweed, apply 20 fluid ounces of this product per acre
when the weed is 8 to 12 inches tall to increase control and possibly avoid the need for a sequential
application.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] and applied postemergence
(in-crop) over the top of soybean with Roundup Ready Technology. Ensure that the product used is labeled
for application postemergence (in-crop) to soybean. It is the responsibility of the pesticide user to ensure
that the intended use is included on the label of all products added to a tank mixture. Read and follow label
directions for all products added to the mix. Users must follow the most restrictive directions for use and
precautionary statements of each product in the tank mixture. [ Optional text, only required if the product
information is not included in the list below: For more information on the products listed below, see the
“TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 84 of 165 Revised June 2021
acetochlor; acifluorfen; bentazon; chlorimuron-ethyl; clethodim; cloransulam-methyl; fluazifop-p-
butyl; flumiclorac pentyl ester; fluthiacet-methyl; fomesafen; imazamox; imazethapyr; lactofen;
quizalofop-p-ethyl; sethoxydim; thifensulfuron-methyl
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Arrow 2EC; Assure II;Basagran 5L; Cadet; Classic; CobraExtreme; FirstRate; Flexstar; Fusilade
DX; Fusion; Harmony SG; Phoenix; Poast; Poast Plus; Pursuit; Raptor; Reflex; Resource; Select
2 EC; Select Max Herbicide with Inside Technology; Synchrony XP; Targa; Ultra Blazer; Warrant;
Warrant Ultra]
PRECAUTIONS: Some tank-mix products can cause visual soybean injury.
RESTRICTIONS: The combined total application of this product from crop emergence through harvest must
not exceed 60 fluid ounces per acre. The maximum rate for any single in-crop application is 40 fluid ounces
per acre. The maximum combined total amount of this product that may be applied during flowering (R2
stage soybean) is 40 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Up to 20 fluid ounces of this product per acre may be applied over the top of soybean
with Roundup Ready Technology for weed control prior to harvest after pods have set and lost all green
color.
 Take care to avoid excessive seed shatter loss due to ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest of soybean grain or feeding
of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after soybean harvest. Higher
application rates might be needed to control large weeds that were growing in the field at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled for weed control
application after harvest of soybean. It is the responsibility of the pesticide user to ensure that the intended
use is included on the label of all products added to a tank mixture. Read and follow label directions for all
products added to the mix.
RESTRICTIONS: Application of this product must be made a minimum of 30 days prior to the planting of
any crop not listed on this label.
12.12 Soybean with Roundup Ready 2 Yield Technology, Roundup Ready 2 Xtend Technology and
XtendFlex Technology
The directions for use of this product provided in this section are specific to soybean containing Event MON
89788, which includes Soybean with Roundup Ready 2 Yield Technology, Soybean with Roundup Ready
2 Xtend Technology, and Soybean with XtendFlex Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest;
Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
soybean with Roundup Ready 2 Yield, Roundup Ready 2 Xtend and XtendFlex Technologies.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 85 of 165 Revised June 2021
Total for all In-crop applications from cracking through flowering
(R2 stage soybean) 60 fluid ounces per acre
Maximum Preharvest application rate 20 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting soybean with Roundup
Ready 2 Yield, Roundup Ready 2 Xtend, or XtendFlex Technologies.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may be tank-mixed with products containing one or more of the active ingredients listed
below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to emergence of soybean. It is the responsibility of the
pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; chlorimuron-ethyl; clethodim; clomazone; cloransulam-methyl;
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron; metolachlor;
s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; saflufenicil; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Aim EC; Aim EW; Anthem; Anthem Maxx; Anthem Flex; Assure II; Authority Assist; Authority Elite;
Authority First DF; Authority MAXX; Authority MTZ DF; Authority Supreme; Authority XL; Axiom
DF; Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX; Classic; Cobra;
Command 3ME; Dual MAGNUM; Dual II MAGNUM; Enlite; Envive; Fierce; Fierce MTZ; Fierce XLT;
FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF; Mauler; Me-Too-Lachlor; Optill Powered by Kixor;
Outlook; Phoenix; Prefix; Prowl 3.3 EC; Prowl H2O; Pursuit; Python WDG; Reflex; Resource;
Select 2 EC; Select Max Herbicide with Inside Technology; Sharpen Powered by Kixor; Spartan
4F; Sonic; Treflan 4L; Treflan 4 EC; TriCor 4F; TriCor DF; Valor SX; Valor XLT; Verdict powered
by Kixor; Warrant; Warrant Ultra; Zidua; Zidua PRO Powered by Kixor; Zidua SC]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broadleaf weeds in
soybean with Roundup Ready 2 Yield, Roundup Ready 2 Xtend, or XtendFlex Technologies from
emergence (cracking) through flowering (R2 stage soybean). R2 stage soybean ends when a pod 5
millimeters (3/16 inch) long appears at one of the four uppermost nodes on the main stem with a fully

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 86 of 165 Revised June 2021
developed leaf (R3 stage). Refer to the “ANNUAL WEEDS RATE SECTION” of this label for application
rates for specific annual weeds. An initial application of 20 fluid ounces of this product per acre will control
or suppress most 2- to 8-inch tall weeds, which are normally found approximately 2 to 5 weeks after
planting. If the initial application is delayed and weeds are larger, apply a higher rate of this product. This
product may be applied up to 40 fluid ounces per acre as a single, in-crop application for control of annual
weeds and where dense weed populations exist.
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or
suppress perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed,
hemp dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine,
trumpetcreeper, swamp smartweed and wirestem muhly. For optimal spray coverage and weed control,
allow perennial weed species to achieve at least 6 inches of growth before applying this product.
Under adverse growing conditions, including drought, hail or wind damage, or a poor soybean stand that
slows or delays canopy closure, a sequential application of this product might be necessary to control late
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT
WILL BE REQUIRED TO CONTROL NEW FLUSHES OF WEEDS IN THE SOYBEAN WITH ROUNDUP
READY 2 YIELD, ROUNDUP READY 2 XTEND, AND XTENDFLEX TECHNOLOGY CROP. To control
giant ragweed, apply 20 fluid ounces of this product per acre when the weed is 8 to 12 inches tall to increase
control and possibly avoid the need for a sequential application.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] and applied postemergence
(in-crop) over the top of soybean with Roundup Ready 2 Yield, Roundup Ready 2 Xtend and XtendFlex
Technology. Ensure that the product used is labeled for application postemergence (in-crop) to soybean.
It is the responsibility of the pesticide user to ensure that the intended use is included on the label of all
products added to a tank mixture. Read and follow label directions for all products added to the mix. Users
must follow the most restrictive directions for use and precautionary statements of each product in the tank
mixture. [Optional text, only required if the product information is not included in the list below: For more
information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this
label.]

[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; acifluorfen; bentazon; chlorimuron ethyl; clethodim; cloransulam-methyl; fluazifop-p-
butyl; flumiclorac pentyl ester; fluthiacet-methyl; fomesafen; imazamox; imazethapyr; lactofen;
quizalofop-P-ethyl; sethoxydim; thifensulfuron-methyl
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Arrow 2EC; Assure II; Basagran 5L; Cadet; Classic; Cobra; Extreme; FirstRate; Flexstar; Fusilade
DX; Fusion; Harmony SG; Phoenix; Poast; Poast Plus; Pursuit; Raptor; Reflex; Resource; Select
2 EC; Select Max Herbicide with Inside Technology; Synchrony XP; Targa; Ultra Blazer; Warrant;
Warrant Ultra]
PRECAUTIONS: Some tank-mix products can cause visual soybean injury.
RESTRICTIONS: The combined total application of this product from crop emergence through harvest must
not exceed 60 fluid ounces per acre. The maximum rate for any single in-crop application is 40 fluid ounces
per acre. The maximum combined total amount of this product that may be applied during flowering (R2
stage soybean) is 40 fluid ounces per acre.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 87 of 165 Revised June 2021
Preharvest
USE INSTRUCTIONS: Up to 20 fluid ounces of this product per acre may be applied over the top of soybean
with Roundup Ready 2 Yield, Roundup Ready 2 Xtend and XtendFlex Technologies for weed control prior
to harvest after pods have set and lost all green color.
 Take care to avoid excessive seed shatter loss due
to ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest of soybean grain or feeding
of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after soybean harvest. Higher
application rates might be needed to control large weeds that were growing in the field at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled for weed control
application after harvest of soybean. Read and follow label directions for all products added to the mix.
RESTRICTIONS: Application of this product must be made a minimum of 30 days prior to the planting of
any crop not listed on this label.
12.13 Soybean with GT27 Technology and Enlist E3 Technology
The directions for use of this product provided in this section are specific to soybean containing Event FG72
and DAS44406-6, which includes soybean with GT27 Technology and soybean with Enlist E3 Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest;
Post-Harvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
soybean with GT27 and Enlist E3 Technologies.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking through flowering
(R2 stage soybean) 60 fluid ounces per acre
Maximum Preharvest application rate 20 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting soybean with GT27 and
Enlist E3 Technologies.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba [ Alternative text: Banvel (EPA
Reg. No. 66330-276; dicamba) or Clarity (EPA Reg. No. 7969-137; dicamba)] and applied prior to planting
only. This product may be tank-mixed with products containing one or more of the active ingredients listed
below [Optional text:, or one or more of the products listed,] and applied prior to crop emergence. Ensure
that the product used is labeled for application prior to emergence of soybean. It is the responsibility of the
pesticide user to ensure that the intended use is included on the label of all products added to a tank
mixture. Read and follow label directions for all products added to the mix. Users must follow the most
restrictive directions for use and precautionary statements of each product in the tank mixture. [ Optional

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 88 of 165 Revised June 2021
text, only required if the product information is not included in the list below: For more information on the
products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; carfentrazone-ethyl; chlorimuron ethyl; clethodim; clomazone; cloransulam-methyl;
dimethenamid; dimethenamid-p; fluazifop-p-butyl; flufenacet; flumetsulam; flumiclorac pentyl ester;
flumioxazin; fluthiacet-methyl; fomesafen; imazaquin; imazethapyr; lactofen; linuron; metolachlor;
s-metolachlor; metribuzin; pendimethalin; pyroxasulfone; saflufenicil; quizalofop-p-ethyl;
saflufenacil; sulfentrazone; thifensulfuron; tribenuron methyl; trifluralin
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Aim EC; Aim EW; Anthem; Anthem Maxx; Anthem Flex; Assure II; Authority Assist; Authority Elite;
Authority First DF; Authority MAXX; Authority MTZ DF; Authority Supreme; Authority XL; Axiom
DF; Blanket 4F; Boundary 6.5 EC; Cadet; Canopy; Canopy Blend; Canopy EX; Classic; Cobra;
Command 3ME; Dual MAGNUM; Dual II MAGNUM; Enlite; Envive; Fierce; Fierce MTZ; Fierce XLT;
FirstRate; Flexstar; Fusion; Linex 4L; Lorox DF; Mauler; Me-Too-Lachlor; Optill Powered by Kixor;
Outlook; Phoenix; Prefix; Prowl 3.3 EC; Prowl H2O; Pursuit; Python WDG; Reflex; Resource;
Select 2 EC; Select Max Herbicide with Inside Technology; Sharpen Powered by Kixor; Spartan
4F; Sonic; Treflan 4L; Treflan 4 EC; TriCor 4F; TriCor DF; Valor SX; Valor XLT; Verdict powered
by Kixor; Warrant; Warrant Ultra; Zidua; Zidua PRO Powered by Kixor; Zidua SC]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be used to control annual grasses and broadleaf weeds in
soybean with GT27 and Enlist E3 Technologies from emergence (cracking) through flowering (R2 stage
soybean). R2 stage soybean ends when a pod 5 millimeters (3/16 inch) long appears at one of the four
uppermost nodes on the main stem with a fully developed leaf (R3 stage). Refer to the “ANNUAL WEEDS
RATE SECTION” of this label for application rates for specific annual weeds.
An initial application of 20 fluid ounces of this product per acre will control or suppress most 2- to 8-inch tall
weeds, which are normally found approximately 2 to 5 weeks after planting. If the initial application is
delayed and weeds are larger, apply a higher rate of this product. This product may be applied up to 40
fluid ounces per acre as a single, in-crop application for control of annual weeds and where dense weed
populations exist.
Application of 20 to 40 fluid ounces of this product per acre (single or multiple applications) will control or
suppress perennial weeds, including bermudagrass, Canada thistle, common milkweed, field bindweed,
hemp dogbane, horsenettle, marestail (horseweed), nutsedge, quackgrass, rhizome johnsongrass, redvine,
trumpetcreeper, swamp smartweed and wirestem muhly. For best results, allow perennial weed species to
achieve at least 6 inches of growth before applying this product.
Under adverse growing conditions, including drought, hail or wind damage, or a poor soybean stand that
slows or delays canopy closure, a sequential application of this product might be necessary to control late
flushes of weeds. IN THE SOUTHERN STATES, A SEQUENTIAL APPLICATION OF THIS PRODUCT
WILL BE NEEDED TO CONTROL NEW FLUSHES OF WEEDS IN THE SOYBEAN CROP WITH GT27
AND ENLIST E3 TECHNOLOGIES. To control giant ragweed, apply 20 fluid ounces of this product per
acre when the weed is 8 to 12 inches tall to increase control and possibly avoid the need for a sequential
application.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 89 of 165 Revised June 2021
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] and applied postemergence
(in-crop) over the top of soybean with GT27 and Enlist E3 Technologies. Ensure that the product used is
labeled for application postemergence (in-crop) to soybean. It is the responsibility of the pesticide user to
ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; fomesafen
Warrant (EPA Reg. No. 524-591; acetochlor); Warrant Ultra (EPA Reg. No. 524-620; acetochlor,
fomesafen)
Flexstar; Reflex; Select 2 EC; Select Max Herbicide with Inside Technology; Warrant; Warrant
Ultra]
PRECAUTIONS: In-crop applications of this product made alone or with the addition of other crop chemical
products could result in a crop response. Contact your seed trait provider for more information.
RESTRICTIONS: The combined total application of this product from crop emergence through harvest must
not exceed 60 fluid ounces per acre. The maximum rate for any single in-crop application is 40 fluid ounces
per acre. The maximum combined total amount of this product that may be applied during flowering (R2
stage soybean) is 40 fluid ounces per acre.
Preharvest
USE INSTRUCTIONS: Apply up to 20 fluid ounces of this product per acre to soybean with GT27 and
Enlist E3 Technologies for weed control prior to harvest after pods have set and lost all green color.
 Take
care to avoid excessive seed shatter loss due to ground application equipment.
RESTRICTIONS: Allow a minimum of 14 days between application and harvest of soybean grain or feeding
of soybean grain, forage or hay.
Post-Harvest
USE INSTRUCTIONS: This product may be applied for weed control after soybean harvest. Higher
application rates might be needed to control large weeds that were growing in the field at the time of harvest.
Tank mixtures with 2,4-D or dicamba may be used. Ensure that the product used is labeled for weed control
application after harvest of soybean. Read and follow label directions for all products added to the mix.
RESTRICTIONS: Application of this product must be made a minimum of 30 days prior to the planting of
any crop not listed on this label.
12.14 Sugarbeet with Roundup Ready Technology
The directions for use of this product provided in this section are specific to sugarbeet containing Event H7-
1, which includes sugarbeet with Roundup Ready Technology.
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop)
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
sugarbeet with Roundup Ready Technology.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 90 of 165 Revised June 2021
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Maximum single application rate from emergence to 8-leaf stage 30 fluid ounces per acre
Total for all applications made from emergence to 8-leaf stage 50 fluid ounces per acre
Maximum single application rate between 8-leaf stage and canopy
closure 20 fluid ounces per acre
Total for all applications made between 8-leaf stage and canopy
closure 40 fluid ounces per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of this label for
information regarding the use of this product in Roundup Ready and other listed glyphosate-tolerant crops.
See the “PRODUCT INFORMATION” section of this label for more information on Maximum Application
Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting sugarbeet with Roundup
Ready Technology.
TANK MIXTURES: This product may be tank-mixed with Nortron SC (EPA Reg. No. 264-613;
ethofumesate) and applied prior to crop emergence. Read and follow the directions for use of Nortron SC
and follow the most restrictive directions for use and precautionary statements for each.
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied over the top of sugarbeet with Roundup Ready
Technology for control of annual grasses and broadleaf weeds from emergence to 30 days prior to harvest.
To maximize yield potential, eliminate competing weeds early. Up to 4 applications of this product may be
made with a minimum of 10 days between each application. This product will control or suppress most
perennial weeds. For some perennial weeds, more than one application might be needed to eliminate crop
competition throughout the growing season. Refer to the “ANNUAL WEEDS RATE SECTION” and
“PERENNIAL WEEDS RATE SECTION” of this label for application rates for specific weeds.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed,] and applied postemergence
(in-crop) over the top of sugarbeet with Roundup Ready Technology. Ensure that the product used is
labeled for application postemergence (in-crop) to sugarbeet. It is the responsibility of the pesticide user to
ensure that the intended use is included on the label of all products added to a tank mixture. Read and
follow label directions for all products added to the mix. Users must follow the most restrictive directions for
use and precautionary statements of each product in the tank mixture. [ Optional text, only required if the
product information is not included in the list below: For more information on the products listed below, see
the “TANK-MIX PRODUCT INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
acetochlor; clethodim; clopyralid; dimethenamid-P; ethofumesate; fluazifop-p-butyl; s-metolachlor;
quizalofop-p-ethyl; triflusulfuron methyl
Nortron SC (EPA Reg. No. 264-613; ethofumesate); Warrant (EPA Reg. No. 524-591; acetochlor)

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 91 of 165 Revised June 2021
Assure II; Dual MAGNUM; Dual II MAGNUM; Fusilade DX; Nortron SC; Outlook; Select 2 EC;
Select Max Herbicide with Inside Technology; Stinger, Upbeet; Warrant]
RESTRICTIONS: The combined total application of this product from crop emergence through harvest must
not exceed 90 fluid ounces per acre. The maximum rate for any single application from crop emergence
until the 8-leaf stage is 30 fluid ounces per acre. The maximum rate for any single application between the
8-leaf stage and canopy closure is 20 fluid ounces per acre. Allow a minimum of 30 days between
application and sugarbeet harvest.
13.0 FARMSTEAD USE
TYPES OF USES: Farmstead Weed Control; Trim-and-Edge; Greenhouse/Shadehouse; Chemical
Mowing; Cut Stump Application; Habitat Management
USE INSTRUCTIONS: Refer to the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE
SECTION” of this label for application rates for specific weeds. When applied as directed, this product will
control those annual and perennial grasses and broadleaf weeds on and around a farmstead. Application
rates of this product specified in the following sections, or on separate supplemental labeling or Fact Sheets
published for this product, for hard-to-control weeds supersede rates in the “ANNUAL WEEDS RATE
SECTION” and “PERENNIAL WEEDS RATE SECTION” of this label.
13.1 Farmstead Weed Control, Trim-and-Edge
USE INSTRUCTIONS: This product may be used to control annual and perennial weeds, woody brush,
trees and vines found on any part of the farmstead, including around building foundations and equipment
storage areas, along and in fences, in dry ditches and canals, along ditch banks, driveways, farm roads,
farmyards, fencerows, parking areas, rangeland, rights-of-way, shelterbelts, storage areas and prior to
planting landscape ornamentals.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [ Optional text:, or one or more of the products listed], provided that the product
used is labeled for these sites and uses. Refer to each individual product label for approved sites and
application rates. It is the responsibility of the pesticide user to ensure that the intended use is included on
the label of all products added to a tank mixture. Read and follow label directions for all added to the mix.
Users must follow the most restrictive directions for use and precautionary statements of each product in
the tank mixture. [Optional text, only required if the product information is not included in the list below: For
more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of
this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; bromacil; chlorosulfuron; dicamba; diuron; imazapic; imazapyr; metsulfuron-methyl; oryzalin;
oxadiazon; pendimethalin; prodiamine; sulfometuron-methyl
Arsenal; Banvel; Banvel 480; Barricade 4FL; Barricade 65WG; Clarity; Endurance; Escort XP;
Karmex DF; Krovar DF; Oust XP; Pendulum 3.3 EC; Pendulum 2G; Pendulum Aqua Cap; Plateau;
Princep 4L; Princep Caliber 90; Princep Liquid; Ronstar 50 WSP; Ronstar Flo; Ronstar G; Sahara
DG; Surflan AS Agricultural; Surflan AS Specialty; Surflan Flex; Surflan XL 2G; Telar XP; Vanquish]
For annual weeds, apply 20 fluid ounces of this product per acre when weeds are less than 6 inches tall,
30 fluid ounces when weeds are 6 to 12 inches tall and 40 fluid ounces when weeds are greater than 12
inches tall. For perennial weeds, apply 40 fluid ounces to 3.125 quarts per acre in a tank-mix with one of
the products listed here. For application of tank mixtures using a backpack sprayer, handgun or other

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 92 of 165 Revised June 2021
handheld applicator, see the “ANNUAL WEEDS RATE SECTION” and “PERENNIAL WEEDS RATE
SECTION” of this label for the required concentration of this product in the mix.
13.2 Greenhouse/Shadehouse
USE INSTRUCTIONS: This product may be used to c ontrol weeds in and around greenhouses and
shadehouses.
PRECAUTIONS: Remove desirable vegetation before applying this product inside a greenhouse or
shadehouse to prevent unwanted plant injury.
RESTRICTIONS: Turn air circulation fans off when applying this product inside a greenhouse or
shadehouse and leave them off until the application solution has dried. Do not use this product inside
residential greenhouses.
13.3 Chemical Mowing
USE INSTRUCTIONS: This product may be used to suppress growth of perennial grasses listed in this
section along farm ditches and on any other part of the farmstead to serve as a substitute for mowing. Apply
4 fluid ounces of this product per acre to suppress Kentucky bluegrass, tall fescue, fine fescue,
orchardgrass, bahiagrass or quackgrass covers; 10 fluid ounces to suppress bermudagrass; or 40 fluid
ounces to suppress torpedo grass or para grass. Make all applications in 10 to 20 gallons of spray solution
per acre.
PRECAUTIONS: Use only in areas where some temporary injury or discoloration of perennial grasses can
be tolerated.
13.4 Cut Stump Application
TYPES OF USES: Treating brush and tree stumps on any terrestrial site
USE INSTRUCTIONS: This product may be used to control re-growth and re-sprouting of many species of
woody brush and trees. Cut the woody brush or tree close to the soil surface and immediately apply a 50-
to 100-percent (undiluted) solution of this product to the freshly cut surface using application equipment
capable of covering the entire cambium. A delay in application could result in reduced performance. For
optimal performance, cut the woody brush or tree during period of active growth and full leaf expansion and
apply this product. Some of the species controlled by this method of application of this product are:
Alder Oak Reed, giant Tan oak
Eucalyptus Pepper, Brazilian Saltcedar Willow
Madrone Pine, Austrian Sweetgum
PRECAUTIONS: Do not make a cut stump application when the roots of desirable woody brush or trees
might be grafted to the roots of the cut stump. Some sprouts, stems, or trees can share a common root
system. Adjacent trees having a similar age, height and spacing could be an indicator of a shared root
system. Whether grafted or shared, injury is likely to occur to adjacent stems or trees when this product is
applied to one or more trees sharing a common root system.
13.5 Habitat Management
TYPES OF USES: Habitat Restoration and Maintenance; Wildlife Food Plots
Habitat Restoration and Maintenance
USE INSTRUCTIONS: This product may be used to control exotic and other undesirable vegetation in
habitat management areas. Application may be made to allow recovery of native plant species or prior to
planting desirable native species, and for similar broad-spectrum vegetation control in habitat management
areas. Spot application may be used to selectively remove unwanted plants for habitat maintenance and
enhancement.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 93 of 165 Revised June 2021
Wildlife Food Plots
USE INSTRUCTIONS: This product may be used to eliminate annual and perennial weeds prior to planting
wildlife food plots. Any wildlife food species may be planted after applying this product or native species
may be allowed to repopulate the area naturally. If tillage is needed to prepare a seedbed, wait a minimum
of 7 days after application before tilling.
RESTRICTIONS: There are no rotational restrictions for planting any wildlife food species or for allowing
native species to repopulate the area following application of this product.
14.0 ANNUAL WEEDS RATE SECTION
When applying this product in water carrier volumes between 16 and 40 gallons per acre using ground
application equipment, and between 6 and 15 gallons per acre using aerial application equipment, the
following use rates will control the weeds listed in the “ANNUAL WEEDS RATE TABLE” that follows.
x 20 fluid ounces per acre – grasses and broadleaf annual weeds less than 6 inches in height or
circumference, and vines less than 3 inches in length
x 30 fluid ounces per acre – grasses and broadleaf annual weeds 6 to 12 inches in height or
circumference, and vines 3 to 6 inches in length
x 40 fluid ounces per acre – grasses and broadleaf annual weeds greater than 12 inches in height or
circumference, and vines greater than 6 inches in length
WHEN APPLYING IN WATER CARRIER VOLUMES BETWEEN 3 AND 15 GALLONS PER ACRE WITH
GROUND APPLICATION EQUIPMENT, AND BETWEEN 3 AND 5 GALLONS PER ACRE WITH AERIAL
APPLICATION EQUIPMENT, APPLY THIS PRODUC T AT THE RATES SPECIFIED FOR INDIVIDUAL
WEEDS IN THE ANNUAL WEEDS RATE TABLE THAT FOLLOWS.
Apply to actively growing annual weeds. New leaf development indicates active growth.
Annual weeds are often easiest to control when they are small. Application rates greater than those
indicated in the following table might be needed to control older, mature (hardened) or otherwise hard-to-
control annual weed species, even if they meet the size requirements listed. This product may be applied
at rates of up to 40 fluid ounces per acre for hard-to-control annual weeds and where dense weed
populations exist. Follow all precautions and restrictions, including maximum application rates and crop
stage timings specified in the directions for use on specific crops, including Roundup Ready and other
glyphosate-tolerant crops, and use sites listed on this label.
Maximum size refers to the maximum plant height, length of runners for vines, or circumference of rosette
plants in inches.
Do not tank-mix this product with soil residual herbicides when applying at these rates, unless otherwise
directed.
For control of annual weeds using a handheld controlled droplet applicator (CDA), apply a 20-percent
solution of this product (25 to 26 fluid ounces per gallon of spray solution) at a flow rate of 2 fluid ounces
per minute and a walking speed of 1.5 miles per hour (1 quart per acre). When using a vehicle-mounted
CDA, apply the required amount of this product, as indicated in the following table, in 2 to 15 gallons of
water per acre.
For weeds that have been mowed, grazed or cut, allow re-growth to occur prior to application of this product.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 94 of 165 Revised June 2021
ANNUAL WEEDS RATE TABLE

Weed Species
Broadcast Application Rate
(fluid ounces per acre)
10 15 20 25 30
Maximum Height/Length (inches)
Ammannia, purple 3 6 12 - 18
Anoda, spurred - 2 3 5 8
Barley 18 18 + - - -
Barnyardgrass - 3 6 7 9
Bassia, fivehook - - 6 - -
Beggarweed, Florida - 5 8 - -
Bittercress 12 20 - - -
Bluegrass, annual* 10 - - - -
Bluegrass, bulbous 6 - - - -
Brome, downy1,2 6 12 - - -
Brome, Japanese 6 12 24 - -
Browntop panicum 6 8 12 - 24
Buckwheat, wild3 - 1 2 - -
Burcucumber - 6 12 - 18
Buttercup 12 20 - - -
Carolina geranium - - 4 - 9
Carpetweed - 6 12 - -
Cheat2 6 20 - - -
Chervil 20 - - - -
Chickweed - 12 18 - -
Cocklebur 12 18 24 - 36
Copperleaf, hophornbeam - 2 4 - 6
Copperleaf, Virginia - 2 4 - 6
Coreopsis, plains - 6 12 - 18
Corn, volunteer 6 12 20 - -
Corn speedwell 12 - - - -
Crabgrass 3 6 12 - -
Crowfootgrass - - 6 - 12
Cutleaf evening primrose - - 3 - 6
Devilsclaw (unicorn plant) - 3 6 - -
Dwarf dandelion 12 - - - -
Eastern mannagrass 8 12 - - -
Eclipta - 4 8 12 -
Fall panicum 4 - 6 - 12
False dandelion - 20 - - -
Falseflax, smallseed 12 - - - -
Fiddleneck - 6 12 - -

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 95 of 165 Revised June 2021

Weed Species
Broadcast Application Rate
(fluid ounces per acre)
10 15 20 25 30
Maximum Height/Length (inches)
Field pennycress 6 12 - - -
Filaree - - 6 - 12
Fleabane, annual 6 20 - - -
Fleabane, hairy* (Conyza bonariensis) - - 6 - 10
Fleabane, rough 3 6 12 - -
Florida pusley - - 4 - 6
Foxtail; giant, bristly, yellow 6 12 20 - -
Foxtail, Carolina 10 - - - -
Foxtail, green 12 - - - -
Goatgrass, jointed 6 12 - - -
Goosegrass* - 3 6 - 12
Grain sorghum (milo) 6 12 20 - -
Groundcherry - 3 6 - 9
Groundsel; common, cressleaf - 6 10 - -
Hemp sesbania - 2 4 6 8
Henbit - - 6 - 12
Horseweed / Marestail* (Conyza canadensis) - 6 12 - 18
Itchgrass 6 8 12 - 18
Jimsonweed - - 12 - 18
Johnsongrass, seedling* 6 12 18 - 24
Junglerice* - 3 6 7 9
Knotweed - - 6 - 12
Kochia*4 - 3 to 6 12 - -
Lambsquarters - 6 12 - 20
Little barley 6 12 - - -
London rocket 6 - 24 - -
Mayweed - 2 6 12 18
Morning glory, annual (Ipomoea spp) - - 3 - 6
Mustard; blue, tansy, tumble, wild 6 12 18 - -
Nightshade; black, hairy - 4 6 - 12
Oats 3 6 18 - -
Pigweed, Palmer* - 12 18 24 -
Pigweed species* - 12 18 24 -
Prickly lettuce - 6 12 - -
Purslane - - 3 - 6
Ragweed; common,* giant* - 6 12 - 18
Red rice - - 4 - -
Rye, volunteer/cereal2 6 18 18 + - -

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 96 of 165 Revised June 2021

Weed Species
Broadcast Application Rate
(fluid ounces per acre)
10 15 20 25 30
Maximum Height/Length (inches)
Ryegrass species* - - 6 - 12
Sandbur, field 6 12 - - -
Sandbur, longspine 6 12 - - -
Shattercane 6 12 20 - -
Shepherd’s-purse 6 12 - - -
Sicklepod - 2 4 - 8
Signalgrass, broadleaf - 3 6 7 9
Smartweed, ladysthumb - - 6 - 9
Smartweed, Pennsylvania - - 6 - 9
Sowthistle, annual - - 6 - 12
Spanish needles - - 6 - 12
Speedwell, purslane 12 - - - -
Sprangletop 6 12 20 - -
Spurge; prostrate, spotted - 6 12 - -
Spurry, umbrella 6 - - - -
Stinkgrass - 12 - - -
Sunflower* 12 18 - - -
Swinecress - 5 12 - -
Teaweed/ Prickly sida - 2 4 - 6
Texas panicum 6 8 12 - 24
Thistle, Russian*5 - 6 12 - -
Velvetleaf - - 6 - 12
Virginia pepperweed - 18 - - -
Waterhemp* - - 6 - 12
Wheat2 6 12 18 - -
Wheat (overwintered) - 6 12 - 18
Wild oats 3 6 18 - -
Wild proso millet - 6 12 - 18
Witchgrass - 12 - - -
Woolly cupgrass - 6 12 - -
Yellow rocket - 12 20 - -
1 For control of downy brome in no-till systems, apply 15 fluid ounces of this product per acre.
2 Performance of this product is best when application is made before this weed reaches the boot stage of
growth.
3 Apply 15 fluid ounces of this product per acre to control wild buckwheat in the cotyledon to 2-leaf stage
and 20 fluid ounces per acre to control 2- to 4-leaf wild buckwheat. For better control of wild buckwheat
over 2 inches in size, make sequential applications of 20 fluid ounces followed by 20 fluid ounces of this
product per acre.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 97 of 165 Revised June 2021
4 Do not apply when kochia is in the button stage.
5 Control of Russian thistle can vary based on environmental conditions and spray coverage. If possible,
apply this product in a tank mixture with 2,4-D, as described in the following section, to improve control.
* A glyphosate-resistant biotype has been confirmed. For additional information, refer to the “WEED
RESISTANCE MANAGEMENT” section of this label. You can also visit www.weedscience.org or contact
your Bayer CropScience representative.
14.1 Annual Weeds Tank Mixtures with 2,4-D, Dicamba or Tordon 22K
Control of a broader spectrum of hard-to-control weeds can be achieved by tank-mixing this product with
dicamba, 2,4-D, or Tordon 22K (EPA Reg. No. 6271-6; picloram). An appropriate rate of these other
herbicides combined with the rate of this product specified in the “ANNUAL WEEDS RATE TABLE” will
control the following weeds up to the maximum height or length indicated: 6 inches prickly lettuce,
marestail/horseweed, morning glory, kochia (in a tank-mix with dicamba only), wild buckwheat (in a tank-
mix with Tordon 22K only); 12 inches cocklebur, lambsquarters, pigweed, Russian thistle (in a tank-mix
with 2,4-D only).
At application rates given in the “ANNUAL WEEDS RATE SECTION,” this product will control the following
weeds up to a maximum height or length of 6 inches: common ragweed, giant ragweed, Pennsylvania
smartweed, and velvetleaf. For better control of these weeds, apply this product in a tank-mix with 2,4-D.
Ensure that the product used is labeled for application at the desired site. Follow all precautions and
limitations on the tank-mix product label, including any application timing restrictions, soil restrictions,
minimum re-cropping intervals and/or crop rotation restrictions. Use according to the more restrictive label
requirements. Some crop injury could occur if dicamba or Tordon 22K is applied within 45 days of planting.
14.2 Annual Weeds Handheld Sprayers
For control of weeds listed in the “ANNUAL WEEDS RATE TABLE,” apply a 0.3-percent solution of this
product to weeds less than 6 inches in height or runner length prior to seedhead formation in grasses or
bud formation in broadleaf weeds. For control of annual weeds over 6 inches tall, or unless otherwise
directed, use a 0.6-percent solution.
For control of annual weeds when using application methods that result in less than complete coverage,
apply a 3.1-percent solution of this product.
14.3 Annual Weeds Tank Mixtures for Fallow and Reduced Tillage Systems
For use only in Colorado, Kansas, Nebraska, Oklahoma, Oregon, South Dakota, and Washington. In
Oregon and Washington, do not exceed 1 pound of atrazine per acre.
Application of 15 to 18 fluid ounces of this product per acre in a tank mixture with atrazine will control the
following weeds: barnyardgrass (requires 18 fluid ounces of this product per acre for control), downy brome,
green foxtail, lambsquarters, prickly lettuce, tansy mustard, pigweed, field sandbur, stinkgrass, Russian
thistle, volunteer wheat and witchgrass. For control of kochia, apply 15 to 18 fluid ounces of this product
per acre in a tank-mix with atrazine and dicamba. Ensure that the atrazine and dicamba products are
labeled for the intended use and application site. Follow all precautions and limitations on the tank-mix
product label, including any application timing restrictions, soil restrictions, minimum re-cropping intervals
and/or crop rotation restrictions.
15.0 PERENNIAL WEEDS RATE SECTION
Apply this product to actively growing perennial weeds. New leaf development indicates active growth.
Maximum performance of this product can be obtained when soil moisture is adequate for active weed
growth.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 98 of 165 Revised June 2021
If weeds have been recently mowed or tilled, do not apply this product until plants have resumed active
growth and have reached the specified stage of growth or sufficient growth has been achieved to allow for
good interception of the spray solution. For maximum performance, do not mow, cut, till, burn or disturb
vegetation in the application area for a minimum of 7 days after application.
To control hard-to-control perennial weeds, such as bermudagrass, dock, field bindweed, hemp dogbane,
milkweed and Canada thistle, using a handheld sprayer, apply a 1.3-percent solution of this product. For
control of perennial weeds when using application methods that result in less than complete coverage,
apply a 3.1-percent solution of this product.
For control of perennial weeds using a handheld controlled droplet applicator (CDA), apply a 20- to 30-
percent solution of this product (25 to 38 fluid ounces per gallon of applicator solution) at a flow rate of 2
fluid ounces per minute and a walking speed of 0.75 mile per hour (2 to 3 quarts per acre). When using a
vehicle-mounted CDA, apply the appropriate amount of this product, as indicated in the following rate table,
in 2 to 15 gallons of water per acre.
This product has no soil activity and does not control emergence of perennial weeds from seed and dormant
underground roots, rhizomes or tubers present in the soil at the time of application. More than one
application of this product might be necessary to control weeds regenerating from underground parts or
seed, but must be made prior to crop emergence, except where in-crop application is allowed.
Application of this product in the fall must be made before a killing frost.
Unless otherwise directed, allow a minimum of 7 days after application before soil tillage.
PERENNIAL WEEDS RATE TABLE
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
Alfalfa 1 – 1.25 3 – 10 1.3%
Apply after the last cutting in the fall and alfalfa has re-grown to a minimum height of 6 inches. Follow
with deep tillage after a minimum of 7 days after application, but before soil freeze-up.
Alligatorweed 2.5 3 – 20 0.9%
For partial control, apply this product when most target plants are in bloom. More than one application
will be needed to achieve control.
Anise (fennel)1 – – 0.9- 1.3%
Bahiagrass2 1.9 – 3.125 3 – 20 1.3%
Bentgrass 0.9 10 – 20 1.3%
For suppression in grass seed production areas using ground application equipment only. Ensure entire
crown area has resumed growth prior to application in the fall. Ensure that bentgrass has at least 3 inches
of growth before application. Avoid tillage prior to application. Tillage 7 to 10 days after application will
help improve bentgrass control.
Bermudagrass 1.9 – 3.125 3 – 20 1.3%
For control, apply 3.125 quarts of this product per acre when bermudagrass is actively growing and
seedheads are present. More than one application might be necessary to achieve control. For partial
control, apply 60 fluid ounces per acre.
Bermudagrass, water (knotgrass) 0.6 – 1 5 – 10 1.3%
Apply 30 fluid ounces of this product in 5 to 10 gallons of water per acre when water bermudagrass is 12
to 18 inches in length. Allow a minimum of 7 days after application before tilling, flushing or flooding the
field.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 99 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
For fall application prior to frost, till fallow fields and apply 20 fluid ounces of this product in 5 to 10 gallons
of water per acre when water bermudagrass is 12 to 18 inches tall.
This product is not registered in California for control of water bermudagrass.
Bindweed, field 0.3 – 3.1 3 – 20 1.3%
Allow maximum bindweed emergence and runner growth before applying this product. Do not apply this
product when field bindweed is under drought stress, as good soil moisture is necessary for active growth
and efficacy of this product.
For control, apply 2.5 to 3.125 quarts of this product per acre west of the Mississippi River and 1.9 to 2.5
quarts per acre east of the Mississippi River when bindweed is at or beyond full bloom. For maximum
performance, apply this product in late-summer or fall. Fall application must be made before a killing
frost.
Also for control, apply 40 fluid ounces of this product plus an appropriate rate of dicamba in 10 to 20
gallons of water per acre. Do not apply this mixture using aerial application equipment.
For suppression on irrigated agricultural land, irrigate at least once to promote active bindweed growth
and apply 20 to 40 fluid ounces of this product plus an appropriate rate of 2,4-D in 10 to 20 gallons of
water per acre using ground application equipment only. Application may be made following harvest or
on fallow ground in the fall when bindweed is actively growing and the majority of runners are 12 inches
or more in length.
For suppression, apply 10 fluid ounces of this product plus a rate of 2,4-D that will provide suppression
of field bindweed in 3 to 10 gallons of water per acre using ground application equipment, or in 3 to 5
gallons of water per acre using aerial application equipment. Application of this tank-mix using aerial
equipment is only allowed on fallow fiel ds and in reduced tillage systems. Delay a pplication until
maximum bindweed emergence has occurred and vines are 6 to 18 inches in length.
In California only, apply 20 fluid ounces to 3.125 quarts of this product per acre. Actual rate needed for
suppression or control will vary within this range depending on local conditions. For suppression on
irrigated land where annual tillage is performed, apply 20 fluid ounces of this product in 3 to 10 gallons
of water per acre when bindweed has reached a length of 12 inches or more and wait a minimum of 3
days after application before tillage.
Bluegrass, Kentucky
 0.6 – 1.25 3 – 40 1.3%
Apply 40 fluid ounces of this product in 10 to 40 gallons of water per acre when most plants have reached
boot to early-seedhead stage of development. For partial control in pasture or hay crop renovation, apply
20 to 30 fluid ounces of this product in 3 to 10 gallons of water per acre to actively growing target plants
when most have reached 4 to 12 inches in height.
Blueweed, Texas 1.9 – 3.125 3 – 40 1.3%
Apply 2.5 to 3.125 quarts of this product per acre west of the Mississippi River or 1.9 to 2.5 quarts per
acre east of the Mississippi River when plants are at or beyond full bloom. For maximum performance,
apply this product in late-summer or fall. Fall application must be made before a killing frost.
Brackenfern 1.9 – 2.5 3 – 40 0.9%
Make application to fully expanded fronds that are at least 18 inches long.
Bromegrass, smooth 0.6 – 1.25 3 – 40 1.3%
Apply 40 fluid ounces of this product in 10 to 40 gallons of water per acre when most target plants have
reached boot to early-seedhead stage of development. For partial control in pasture or hay crop
renovation, apply 20 to 30 fluid ounces of this product in 3 to 10 gallons of water per acre to actively
growing bromegrass when it has reached a height of 4 to 12 inches.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 100 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
Bursage, woolly-leaf – 3 – 20 1.3%
For control, apply 40 fluid ounces of this product per acre in a tank-mix with an appropriate rate of
dicamba when plants are producing new active growth that has been initiated by moisture for at least 2
weeks and are at or beyond flowering. For partial control, apply 20 fluid ounces of this product per acre
with an appropriate rate of dicamba.
Canarygrass, reed2 1.25 – 1.9 3 – 40 1.3%
Cattail2 1.9 – 3.125 3 – 40 1.3%
Clover; red, white1 1.9 – 3.125 3 – 20 1.3%
Also for control, apply 10 to 20 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-
D in 3 to 10 gallons of water per acre.
Cogongrass 1.9 – 3.125 10 – 40 1.3%
Apply in late-summer or fall when cogongrass is at least 18 inches tall. Due to uneven stages of growth
and the dense nature of this vegetation preventing good spray coverage, more than one application might
be necessary to achieve control.
Dallisgrass
2 1.9 – 3.125 3 – 20 1.3%
Dandelion1 1.9 – 3.125 3 – 40 1.3%
Also for control, apply 10 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-D in 3
to 10 gallons of water per acre.
Dock, curly1 1.9 – 3.125 3 – 40 1.3%
Also for control, apply 10 to 20 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-
D in 3 to 10 gallons of water per acre.
Dogbane, hemp 2.5 3 – 40 1.3%
Apply when most target plants have reached the late-bud to flower stage of development. Allow weeds
to re-grow to a mature stage prior to application of this product after crop harvest or mowing. For
maximum performance, apply this product in late summer or fall.
For suppression, apply 10 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-D in
3 to 10 gallons of water per acre using ground application equipment, and in 3 to 5 gallons of water per
acre using aerial application equipment. Delay application until maximum emergence of hemp dogbane
has occurred.
Fescue (except tall)
2 1.9 – 3.125 3 – 20 1.3%
Fescue, tall 0.6 – 1.9 3 – 40 1.3%
Apply 60 fluid ounces of this product per acre when most tall fescue has reached boot to early-seedhead
stage of development.
For fall application, apply 20 fluid ounces of this product in 3 to 10 gallons of water per acre when plants
have 6 to 12 inches of new growth. A sequential application of 10 fluid ounces of this product per acre
will improve long-term control and will control seedlings germinating after application in the fall or the
following spring.
Guinea grass 1.25 – 1.9 3 – 40 0.9%
Apply when most target plants have reached the 7-leaf stage of growth. Ensure thorough coverage when
using a handheld sprayer. In Texas and the ridge of Florida, apply 40 fluid ounces of this product per
acre for control. In the flatwoods region of Florida, 60 fluid ounces per acre is needed for control.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 101 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
Horsenettle1 1.9 – 3.125 3 – 20 1.3%
Horseradish 2.5 3 – 40 1.3%
Apply when most plants have reached the late-bud to flower stage of growth. For maximum performance,
apply this product in late summer or fall.
Iceplant1 – – 1.3 - 1.9%
Thorough coverage of the target weed with this product will provide enhanced control.
Jerusalem artichoke1 1.9 – 3.125 3 – 20 1.3%
Johnsongrass 0.3 – 1.9 3 – 40 0.9%
In annual cropping systems, apply 20 to 40 fluid ounces of this product in 3 to 10 gallons of water per
acre. Apply 40 fluid ounces of this product when making application in 10 to 40 gallons of water per acre.
On non-crop sites or in fields where annual tillage is not practiced (no-till), apply 40 to 60 fluid ounces of
this product in 10 to 40 gallons of water per acre.
For maximum performance, apply this product when most johnsongrass has reached the boot to head
stage of development or in the fall prior to frost. Allow a minimum of 7 days after application before tillage.
Do not tank-mix with residual herbicides when applying 20 fluid ounces of this product per acre.
For burndown of johnsongrass, apply 10 fluid ounces of this product in 3 to 10 gallons of water per acre
before plants reach a height of 12 inches and allow a minimum of 3 days after application before tillage.
For partial control or suppression, apply a 0.6-percent solution of this product as a spot application when
johnsongrass is 12 to 18 inches tall. Ensure that coverage is uniform and complete.
Kikuyu grass 1.25 – 1.9 3 – 40 1.3%
Apply when most kikuyu grass is at least 8 inches tall (3- or 4-leaf stage of growth). Allow a minimum of
3 days after application before tillage.
Knapweed 2.5 3 – 40 1.3%
Apply when most target plants have reached the late-bud to flower stage of growth. For maximum
performance, apply this product in late summer or fall.
Lantana – – 0.9%
Apply at or beyond the bloom stage of growth.
Lespedeza1 1.9 – 3.125 3 – 20 1.3%
Milkweed, common 1.9 3 – 40 1.3%
Apply when most plants have reached the late-bud to flower stage of growth.
Muhly, wirestem 0.6 – 1.25 3 – 40 1.3%
Apply 20 fluid ounces of this product in 3 to 10 gallons of water per acre, or 40 fluid ounces when applying
in 10 to 40 gallons of water per acre or when applying in pasture, sod, or non-crop areas, when wirestem
muhly is at least 8 inches tall. Do not till the soil between harvest and fall application, or in the fall or
spring prior to spring application. Allow a minimum of 3 days after application before tillage.
Mullein, common
1 1.9 – 3.125 3 – 20 1.3%
Napiergrass2 1.9 – 3.125 3 – 20 1.3%
Nightshade, silverleaf 1.25 3 – 10 1.3%
For maximum performance, apply this product when at least 60 percent of the target plants have berries.
Fall application must be made before a killing frost.
Nutsedge; purple, yellow 0.3 – 1.9 3 – 40 0.9 – 1.3%

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 102 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
For control of nutsedge plants and immature nutlets, apply 60 fluid ounces of this product per acre or a
0.9- to 1.3-percent solution when plants are in flower or when new nutlets can be found at rhizome tips.
Nutlets that have not germinated will not be controlled and will need repeated applications of this product
after germination for long-term control.
Sequential applications of 20 to 40 fluid ounces of this product in 3 to 10 gallons of water per acre when
a majority of the nutsedge plants are in the 3- to 5-leaf stage (less than 6 inches tall) will also provide
control. Repeat this application as necessary when newly emerging plants reach the 3- to 5-leaf stage.
Subsequent applications will be necessary for long-term control.
For partial control of existing plants, apply 10 to 40 fluid ounces of this product in 3 to 40 gallons of water
per acre when plants have 3 to 5 leaves and most are less than 6 inches tall. Repeat this application as
needed to control subsequent emerging plants or re-growth of existing plants.
Orchardgrass 0.6 – 1.25 3 – 40 1.3%
Apply 40 fluid ounces of this product in 10 to 40 gallons of water per acre when most plants have reached
the boot to early-seedhead stage of development. For partial control in pasture or hay crop renovation,
apply 20 to 30 fluid ounces of this product in 3 to 10 gallons of water per acre when orchardgrass is
actively growing and has reached 4 to 12 inches in height.
When going from orchardgrass sod to no-till corn, apply 20 to 30 fluid ounces of this product in 3 to 10
gallons of water per acre to orchardgrass that is a minimum of 12 inches tall for spring application and 6
inches tall for fall application. Allow a minimum of 3 days after application before planting. A sequential
application of atrazine will be necessary to achieve optimum results.
Pampas grass – – 0.9 – 1.3%
Apply this product when pampas grass is at or beyond the boot stage of growth. Thorough coverage of
target plants will provide maximum control.
Para grass2 1.9 – 3.125 3 – 20 1.3%
Phragmites 1.9 – 3.125 10 – 40 0.9 – 1.3%
For partial control, apply this product in late-summer or fall when target plants are actively growing and
in full bloom. Application before or after this stage could result in reduced control. Due to the dense
nature of this vegetation (which can prevent good spray coverage) and uneven stages of growth, more
than one application might be necessary to achieve control. Visual symptoms of control will be slow to
develop.
Poison hemlock – – 0.9 – 1.3%
Apply this product using a handheld sprayer with a spray-to-wet technique. Optimum results are obtained
when thoroughly applied to target plants that are at the bud to full-bloom stage of growth.
Pokeweed, common 1 3 – 40 1.3%
Apply to actively growing target plants up to 24 inches tall.
Quackgrass 0.6 – 1.9 3 – 40 1.3%
In annual cropping systems or in pastures and sod fields to be cultivated with deep tillage, apply 20 fluid
ounces of this product in 3 to 10 gallons of water per acre or 40 fluid ounces in 10 to 40 gallons of water
per acre when quackgrass is 6 to 8 inches in height. Do not tank-mix with residual herbicides when
applying at the 20-fluid-ounce rate. Do not till between harvest and fall application, or in the fall or spring
prior to spring application. Allow a minimum of 3 days after application before tillage. In pastures or sod
fields, use a moldboard plow for maximum control of quackgrass.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 103 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
In pastures, sod fields or non-crop areas where deep tillage will not follow application of this product,
apply 40 to 60 fluid ounces in 10 to 40 gallons of water per acre when quackgrass is greater than 8 inches
tall.
Redvine 0.5 – 1.25 5 – 10 1.3%
For suppression, make two applications of 15 fluid ounces of this product 7 to 14 days apart, or a single
application of 40 fluid ounces, in 5 to 10 gallons of water per acre in late-September or early-October, to
plants that are at least 18 inches tall and have been growing 45 to 60 days since the last tillage operation.
Apply a minimum of 1 week before a killing frost.
Reed, giant – – 1.3%
For maximum control, apply this product in late summer or fall.
Ryegrass, perennial 0.6 – 1.9 3 – 40 0.9%
In annual cropping systems, apply 20 to 40 fluid ounces of this product in 3 to 10 gallons of water per
acre, or 40 fluid ounces when applying in 10 to 40 gallons of water per acre. On non-crop sites or in fields
where annual tillage is not practiced (no-till), apply 40 to 60 fluid ounces of this product in 10 to 40 gallons
of water per acre.
For maximum performance, apply this product when most target plants have reached the boot to head
stage of growth, or in the fall prior to frost. Do not tank-mix with residual herbicides when applying this
product at the 20-fluid-ounce rate.
Smartweed, swamp1 1.9 – 3.125 3 – 40 1.3%
Also for control, apply 10 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-D in 3
to 10 gallons of water per acre in late-summer or fall.
Sowthistle, perennial 1.25 – 1.9 3 – 40 1.3%
Apply when most plants are at or beyond the bud stage of growth. After harvest, mowing or tillage in late-
summer or fall, allow a minimum of 4 weeks for initiation of active growth and rosette development prior
to application of this product. Fall application must be made before a killing frost. Allow a minimum of 3
days after application before tillage.
Spurge, leafy – – 1.3%
For suppression, apply 10 fluid ounces of this product in a tank-mix with an appropriate rate of 2,4-D in
3 to 10 gallons of water per acre in late-summer or fall. If mowing has occurred, delay application until
most target plants are 12 inches tall.
Starthistle, yellow 1.25 10 – 40 1.3%
Best results can be obtained when application is made during the rosette, bolting or early-flower stage.
Sweet potato, wild – – 1.3%
For partial control, apply to target plants that are at or beyond the bloom stage of growth. More than one
application might be needed.
Thistle, artichoke – – 1.3%
For partial control, apply when target plants are at or beyond the bloom stage of growth. More than one
application might be needed.
Thistle, Canada 1.25 – 1.9 3 – 40 1.3%
Apply when most target plants are at or beyond the bud stage of development. After harvest, mowing, or
tillage in late-summer or fall, allow a minimum of 4 weeks for initiation of active growth and rosette
development before applying this product. Fall application must be made before a killing frost.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 104 of 165 Revised June 2021
Weed Species
Broadcast
Rate
(quarts/acre)
Water
Volume
(gallons/acre)
Handheld
Sprayer
Concentration
(% solution)
For suppression in the spring, apply 20 fluid ounces of this product alone or 10 fluid ounces in a tank-
mix with an appropriate rate of 2,4-D in 3 to 10 gallons of water per acre when rosette is a minimum of 6
inches in diameter. Application may be made as long as leaves are still green and plants are actively
growing.
Allow a minimum of 3 days after application before tillage.
Timothy2 1.25 – 1.9 3 – 40 1.3%
Torpedograss 2.5 – 3.125 3 – 40 1.3%
For partial control, apply when most target plants are at or beyond the seedhead stage of development.
More than one application will be needed to achieve control. Fall application must be made before frost.
Trumpetcreeper 1.25 5 – 10 1.3%
For partial control, apply in late-September or October when trumpetcreeper is a minimum of 18 inches
tall and has been growing 45 to 60 days since the last tillage operation. Make application a minimum of
7 days before a killing frost.
Vaseygrass
2 1.9 – 3.125 3 – 20 1.3%
Velvetgrass2 1.9 – 3.125 3 – 20 1.3%
Wheatgrass, western2 1.25 – 1.9 3 – 40 1.3%
1 Apply when most plants have reached the early-bud stage of growth.
2 Apply when most plants have reached the early-heading stage of growth.
16.0 WOODY BRUSH, TREES AND VINES RATE SECTION
Apply this product during full leaf expansion, unless otherwise directed. Use a higher application rate or
spray solution concentration within a given range to control larger plants or in areas of dense vegetative
growth. On vines, use a higher application rate or spray solution concentration for plants that have reached
the woody stage.
In most areas, maximum performance of this product on woody brush, trees and vines can be obtained
when application is made in late-summer or fall after fruit formation.
In arid areas, application of this product in the spring to early summer when brush and trees are at high
moisture content and flowering could provide better results.
Unless otherwise directed, make broadcast applications in 3 to 40 gallons of water per acre. Ensure
thorough coverage when using handheld sprayers.
For control of woody brush, trees and vines when using application methods that result in less than
complete coverage, apply a 3.1 to 6.2-percent solution of this product.
Herbicidal symptoms might not appear prior to frost or senescence following application in the fall.
Allow a minimum of 7 days after application before tillage, mowing or removal of vegetation in the
application area. Repeat applications might be necessary to control plants regenerating from underground
parts or seed. Some autumn color on undesirable deciduous species is acceptable when applying this
product, provided no major leaf drop has occurred. Reduced performance could result if fall application is
made following a frost.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 105 of 165 Revised June 2021
WOODY BRUSH, TREES AND VINES RATE TABLE
Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% solution)
Alder 1.9 – 2.5 0.9%
Ash1 1.25 – 3.125 0.9 – 1.3%
Aspen, quaking 1.25 – 1.9 0.9%
Bearmat (Bearclover)1 1.25 – 3.125 0.9 – 1.3%
Beech1 1.25 – 3.125 0.9 – 1.3%
Birch 1.25 – 1.9 0.9%
Blackberry 1.9 – 2.5 0.9%
Make application after target plants have reached full leaf maturity. For maximum performance, apply
this product in late summer or fall. Apply a 0.6-percent solution of this product after berries have set or
dropped in late fall. After leaf drop and until a killing frost or as long as stems are green, apply 1.9 to
2.5 quarts of this product in 10 to 40 gallons of water per acre.
Blackgum 1.25 – 3.125 0.9 – 1.3%
Bracken 1.25 – 3.125 0.9 – 1.3%
Broom; French, Scotch – 0.9 – 1.3%
Buckwheat, California1,2 – 0.9 – 1.3%
Cascara1 1.25 – 3.125 0.9 – 1.3%
Catsclaw1 – 0.9%
Ceanothus1 1.25 – 3.125 0.9 – 1.3%
Chamise2 – 0.9%
Cherry; bitter, black, pin 1.25 – 1.9 0.9%
Coyote brush – 0.9 – 1.3%
Make application when at least 50 percent of the new leaves are fully developed.
Dogwood1 1.25 – 3.125 0.9 – 1.3%
Elderberry 1.25 – 1.9 0.9%
Elm1 1.25 – 3.125 0.9 – 1.3%
Eucalyptus – 1.3%
For control of eucalyptus re-sprouts, apply when re-sprouts are 6 to 12 feet tall. Ensure complete
coverage. Application to drought-stressed eucalyptus plants will result in less than optimum results.
Florida holly (Brazilian Peppertree)1 1.25 – 3.125 0.9 – 1.3%
Gorse1 1.25 – 3.125 0.9 – 1.3%
Hasardia1,2 – 0.9 – 1.3%
Hawthorn 1.25 – 1.9 0.9%
Hazel 1.25 – 1.9 0.9%
Hickory1 1.25 – 3.125 0.9 – 1.3%
Honeysuckle 1.9 – 2.5 0.9%

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 106 of 165 Revised June 2021
Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% solution)
Hornbeam, American1 1.25 – 3.125 0.9 – 1.3%
Kudzu 2.5 – 3.125 1.3%
More than one application might be needed to achieve control.
Locust, black1 1.25 – 2.5 0.9 – 1.3%
Madrone (re-sprouts)1 – 1.3%
Apply to re-sprouts that are 3 to 6 feet tall. For maximum performance, apply this product in the spring
or early summer.
Manzanita1 1.25 – 3.125 0.9 – 1.3%
Maple, red 1.25 – 2.5 0.9%
Apply a 0.9-percent solution when at least 50 percent of the new leaves are fully developed. For partial
control, apply 40 to 80 fluid ounces of this product per acre.
Maple, sugar – 0.9%
Apply when at least 50 percent of the new leaves are fully developed.
Monkey flower1,2 – 0.9 – 1.3%
Oak; black, white1 1.25 – 2.5 0.9 – 1.3%
Oak, post 1.9 – 2.5 0.9%
Oak, northern – 0.9%
Apply when at least 50 percent of the new pin leaves are fully developed
Oak, southern red 1.25 – 1.9 0.9%
Persimmon1 1.25 – 3.125 0.9 – 1.3%
Pine 1.25 – 3.125 0.9 – 1.3%
Poison ivy/Poison oak 2.5 – 3.1 1.3%
More than one application might be needed to achieve control. Application in the fall must be made
before leaves lose green color.
Poplar, yellow1 1.25 – 3.125 0.9 – 1.3%
Redbud, eastern 1.25 – 3.125 0.9 – 1.3%
Rose, multiflora 1.25 0.9%
Make application prior to leaf deterioration by leaf-eating insects.
Russian olive1 1.25 – 3.125 0.9 – 1.3%
Sage, black2 – 0.9%
Sage, white 1 1.25 – 3.125 0.9 – 1.3%
Sagebrush, California 2 – 0.9%
Salmonberry 1.25 – 1.9 0.9%
Saltcedar 1.25 – 3.125 0.9 – 1.3%
Sassafras1 1.25 – 3.125 0.9 – 1.3%
Sourwood1 1.25 – 3.125 0.9 – 1.3%

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 107 of 165 Revised June 2021
Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% solution)
Sumac; poison, smooth, winged1 1.25 – 2.5 0.9 – 1.3%
Sweetgum 1.25 – 1.9 0.9%
Swordfern1 1.25 – 3.125 0.9 – 1.3%
Tallowtree, Chinese2 – 0.9%
Tan oak (re-sprouts)1 – 1.3%
Apply to re-sprouts that are less than 6 feet tall. For maximum performance, apply this product in the
fall.
Thimbleberry 1.25 – 1.9 0.9%
Tobacco, tree1 – 0.9 – 1.3%
Trumpetcreeper 1.25 – 1.9 0.9%
Vine maple1 1.25 – 3.125 0.9 – 1.3%
Virginia creeper 1.25 – 3.125 0.9 – 1.3%
Waxmyrtle, southern1 1.25 – 3.125 0.9 – 1.3%
Willow 1.9 – 2.5 0.9%
1 Partial Control
2 Thorough coverage of foliage is necessary for maximum performance of this product.
17.0 TANK-MIX PRODUCT INFORMATION [this section printed only if required]
[This section is optional and only required if tank-mix product information is not included in the body of the
label text. Products not included on the final printed label may be deleted from this list. ]
Brand Name EPA Reg. No. Active Ingredient(s)
AAtrex 4L 100-497 atrazine
AAtrex Nine-O 100-585 atrazine
Acuron 100-1466 atrazine, bicyclopyrone, mesotrione, s-metolachlor
Acuron Flexi 100-1568 bicyclopyrone, mesotrione, s-metolachlor
Aim EC 279-3241 carfentrazone-ethyl
Aim EW 279-3242 carfentrazone-ethyl
Alion 264-1106 indaziflam
Anthem 279-3450 fluthiacet-methyl, pyroxasulfone
Anthem ATZ 279-3449 atrazine, fluthiacet-methyl, pyroxasulfone
Anthem Flex 279-3464 carfentrazone-ethyl, pyroxasulfone
Anthem Maxx 279-3468 fluthiacet-methyl, pyroxasulfone
Arrow 2 EC 66222-60 clethodim
Arsenal 241-346 imazapyr
Assure II 352-541 quizalofop-p-ethyl
Authority Assist 279-3330 sulfentrazone, imazethapyr

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 108 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Authority Elite 279-3442 s-metolachlor, sulfentrazone
Authority First DF 279-3246 sulfentrazone, cloransulam-methyl
Authority MAXX 279-9560 sulfentrazone, chlorimuron ethyl
Authority MTZ DF 279-3340 metribuzin, sulfentrazone
Authority Supreme 279-3601 pyroxasulfone, sulfentrazone
Authority XL 279-3413 sulfentrazone, chlorimuron ethyl
Axiom DF 264-766 metribuzin, flufenacet
Balance Flexx 264-1067 isoxaflutole
Banvel 66330-276 dicamba
Banvel 480 66330-421 dicamba
Barricade 4L 100-1139 prodiamine
Barricade 65WG 100-834 prodiamine
Basagran 5L 7969-112 bentazon
Basis 352-571 rimsulfuron, thifensulfuron methyl
Basis Blend 352-854 rimsulfuron, thifensulfuron methyl
Bicep II MAGNUM 100-817 atrazine, s-metolachlor
Bicep II MAGNUM FC 100-817 atrazine, s-metolachlor
Bicep Lite II MAGNUM 100-827 atrazine, s-metolachlor
Blanket 4F 82534-5-55467 sulfentrazone
Boundary 6.5 EC 100-1162 metribuzin, s-metolachlor
Cadet 279-3338 fluthiacet-methyl
Callisto 100-1131 mesotrione
Callisto Xtra 100-1359 atrazine, mesotrione
Canopy 352-444 metribuzin, chlorimuron ethyl
Canopy Blend 352-886 metribuzin, chlorimuron ethyl
Canopy EX 352-635 chlorimuron ethyl, tribenuron methyl
Caparol 4L 100-620 prometryn
Capreno 264-1063 tembotrione, thiencarbazone-methyl
Chateau Herbicide SW 59639-99 flumioxazin
Cinch 352-625 s-metolachlor
Cinch ATZ 352-624 atrazine, s-metolachlor
Cinch ATZ Lite 352-623 atrazine, s-metolachlor
Clarity 7969-137 dicamba
Classic 352-436 chlorimuron ethyl
Cobra 59639-34 lactofen
Command 3ME 279-3158 clomazone
Corvus 264-1066 isoxaflutole, thiencarbozone-methyl
Cotoran 4L 66222-181 fluometuron
Cotton Pro 66222-15 prometryn
DEF 6 264-730 tribufos

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 109 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Degree Xtra 524-511 acetochlor, atrazine
Devrinol 2-XT Selective 70506-301 napropamide
Devrinol 50-DF Selective 70506-36 napropamide
Devrinol 50-DF Ornamental 70506-38 napropamide
Devrinol DF-XT Selective 70506-301 napropamide
Devrinol DF-XT Ornamental 70506-38 napropamide
DiFlexx 264-1173 dicamba
DiFlexx DUO 264-1184 dicamba, tembotrione
Direx 4L 66222-54 diuron
Distinct 7969-150 dicamba, diflufenzopyr
Dri-Clean 228-260 2,4-D
Dropp 264-700 thidiazuron
Dual II MAGNUM 100-818 s-metolachlor
Dual MAGNUM 100-816 s-metolachlor
Endurance 100-834 prodiamine
Enlite 352-757 chlorimuron ethyl, flumioxazin, thifensulfuron
Envive 352-756 chlorimuron ethyl, flumioxazin, thifensulfuron
Envoke 100-1132 trifloxysulfuron-sodium
Escort XP 432-1549 metsulfuron methyl
Extreme 241-405 glyphosate, imazethapyr
Fierce 59639-193 flumioxazin, pyroxasulfone
Fierce MTZ 59639-236 flumioxazin, pyroxasulfone, metribuzin
Fierce XLT 59639-194 chlorimuron ethyl, flumioxazin, pyroxasulfone
FirstRate 62719-275 cloransulam-methyl
Flexstar 100-1101 fomesafen
Folex 6 EC 5481-504 tribufos
FulTime 62719-371 acetochlor, atrazine
FulTime NXT 62719-668 acetochlor, atrazine
Fusilade DX 100-1070 fluazifop-p-butyl
Fusilade II Turf & Ornamental 100-1084 fluazifop-p-butyl
Fusion 100-1059 fluazifop-p-butyl, fenoxaprop-p-ethyl
Ginstar EC 264-634 thidiazuron, diuron
Goal 2XL 62719-424 oxyfluorfen
GoalTender 62719-447 oxyfluorfen
Guardsman MAX 7969-192 dimethenamid-p, atrazine
Harmony SG 352-633
279-9595
thifensulfuron methyl
Harness 524-473 acetochlor
Harness MAX 524-636 acetochlor, mesotrione
Harness Xtra 524-480 acetochlor, atrazine
Harness Xtra 5.6L 524-485 acetochlor, atrazine

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 110 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Hornet WDG Broadleaf Blend 62719-315 clopyralid, flumetsulam
Impact 5481-524 topramezone
ImpactZ 5481-612 topramezone, atrazine
Karmex DF 66222-51 diuron
Kerb 50-W 62719-397 pronamide
Kerb SC 62719-578 pronamide
Keystone 62719-368 acetochlor, atrazine
Keystone LA 62719-479 acetochlor, atrazine
Keystone LA NXT 62719-670 acetochlor, atrazine
Keystone NXT 62719-671 acetochlor, atrazine
Krovar 1 DF 5481-635 bromacil, diuron
Laudis 264-860 tembotrione
Leadoff 352-853 rimsulfuron, thifensulfuron methyl
Linex 4L 61842-21 linuron
Lorox DF 61842-23 linuron
Marksman 7969-136 dicamba, atrazine
Matrix FNV 352-671 rimsulfuron
Matrix SG 352-768 rimsulfuron
Mauler 70506-68-59639 metribuzin
Me-Too-Lachlor 19713-548 metolachlor
Me-Too-Lachlor II 19713-549 metolachlor
MSMA 6 Plus 19713-42 MSMA
MSMA 6.6 19713-41 MSMA
Nortron SC 264-613 ethofumesate
Optill Powered by Kixor 7969-280 imazethapyr, saflufenacil
Orchard Master Broadleaf 2217-703 2,4-D
Orchard Master CA
Broadleaf
2217-703 2,4-D
Oust XP 432-1552 sulfometuron methyl
Outlook 7969-156 dimethenamid-P
Pendulum 2G 241-375 pendimethalin
Pendulum 3.3 EC 241-341 pendimethalin
Pendulum Aqua Cap 241-416 pendimethalin
Phoenix 59639-118 lactofen
Pindar GT 62719-611 oxyfluorfen, penoxsulam
Plateau 241-365 imazapic
Poast 7969-58 sethoxydim
Poast Plus 7969-88 sethoxydim
Prefix 100-1268 s-metolachlor, fomesafen
Princep 4L 100-526 simazine
Princep Caliber 90 100-603 simazine

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 111 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Princep Liquid 100-526 simazine
Prowl 3.3 EC 241-337 pendimethalin
Prowl H2O 241-418 pendimethalin
Pursuit 241-310 imazethapyr
Python WDG 62719-277 flumetsulam
Raptor 241-379 imazamox
Realm Q 352-837 mesotrione, rimsulfuron
Reflex 100-993 fomesafen
Rely 280 264-829 glufosinate-ammonium
Resicore 62719-693 acetochlor, clopyralid, mesotrione
Resolve DF 352-556 rimsulfuron
Resolve Q 352-777 rimsulfuron, thifensulfuron methyl
Resolve SG 352-748 rimsulfuron
Resource 59639-82 flumiclorac pentyl ester
Ronstar 50 WSP 432-893 oxadiazon
Ronstar Flo 432-1465 oxadiazon
Ronstar G 432-886 oxadiazon
Sahara DG 241-372 imazapyr, diuron
Select 2 EC 59639-3 clethodim
Select Max Herbicide with
Inside Technology
59639-132 clethodim
Shark EW 279-3242 carfentrazone-ethyl
Shark H2O 279-3194 carfentrazone-ethyl
Sharpen Powered by Kixor 7969-278 saflufenacil
Sonic 62719-680 sulfentrazone, cloransulam-methyl
Spartan 4F 279-3220 sulfentrazone
Stalwart 60063-24 metolachlor
Stalwart C 60063-22 metolachlor
Stalwart Xtra 60063-23 atrazine, metolachlor
Staple LX 352-613 pyrithiobac-sodium
Status 7969-242 dicamba, diflufenzopyr
Stinger 62719-73 clopyralid
Surflan AS Agricultural 70506-43 oryzalin
Surflan AS Specialty 70506-44 oryzalin
Surflan Flex 70506-308 oryzalin
Surflan Flex T&O 70506-46 oryzalin
Surflan XL 2G 70506-45 benefin, oryzalin
Surpass EC 62719-367 acetochlor
Surpass NXT 62719-672 acetochlor
Synchrony XP 352-648 thifensulfuron, chlorimuron ethyl
Targa 33906-9-81880 quizalofop-p-ethyl

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 112 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Telar XP 432-1561 chlorsulfuron
TopNotch 62719-369 acetochlor
Treevix Powered by Kixor 7969-276 saflufenacil
Treflan 4 EC 5905-532 trifluralin
Treflan 4L 34704-853 trifluralin
TriCor 4F 70506-68 metribuzin
TriCor DF 70506-103 metribuzin
TripleFLEX II 524-614 acetochlor, clopyralid, flumetsulam
Ultra Blazer 70506-60 acifluorfen
Upbeet 279-9584 triflusulfuron methyl
Valor SX 59639-99 flumioxazin
Valor XLT 59639-117 flumioxazin, chlorimuron ethyl
Vanquish 228-397 dicamba
Venue 71711-25 pyraflufen ethyl
Verdict Powered by Kixor 7969-279 dimethenamid-P, saflufenacil
Visor Broadcrop 89167-19-89391 metolachlor
Warrant 524-591 acetochlor
Warrant Ultra 524-620 acetochlor, fomesafen
Zidua 7969-338 pyroxasulfone
Zidua Pro Powered by Kixor 7969-365 saflufenacil, imazethapyr, pyroxasulfone
Zidua SC 7969-374 pyroxasulfone
18.0 LIMIT OF WARRANTY AND LIABILITY
Bayer CropScience LP (“Company) warrants that this product conforms to the chemical description on the
label. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY
OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS
MADE. This warranty is also subject to the conditions and limitations stated herein.
Buyer and all users shall use this product only for the purposes of and in accordance with the Complete
Directions for Use label (“Directions”) and shall promptly notify this Company of any claims whether based
in contract, negligence, strict liability, other tort or otherwise.
To the extent consistent with applicable law, buyer and all users are responsible for all loss, injuries or
damage from use or handling which results from conditions beyond the control of this Company, including,
but not limited to, incompatibility with products other than those set forth in the Directions, application to or
contact with desirable vegetation, crop injury or failure of this product to control weed biotypes which
develop resistance to glyphosate, unusual weather, weather conditions which are outside the range
considered normal at the application site and for the time period when the product is applied, as well as
weather conditions which are outside the application ranges set forth in the Directions, use and/or
application in any manner not explicitly set forth in or inconsistent with the Directions, moisture conditions
outside the moisture range specified in the Directions, or the presence of products other than those set
forth in the Directions in or on the soil, crop or treated vegetation.
This Company does not warrant any product reformulated or repackaged from this product except in
accordance with this Company’s stewardship requirements and with express written permission from this
Company.

I. DIRECTIONS FOR USE WITH FOOD AND FEED CROPS
Master Label 524-659 Page 113 of 165 Revised June 2021
[Optional statement for agricultural-use products, if applicable: For in-crop (over-the-top) uses, crop safety
and weed control performance are not warranted by Bayer CropScience when this product is used in
conjunction with “brown bag” or “bin run” seed saved from previous year’s production and replanted. Crop
safety also is not warranted by Bayer CropScience when this product is used in conjunction with in-crop
(over-the-top) uses beyond the specific technology and uses included in this label]
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE , STRICT LIABILITY,
OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER
FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR
ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO THE TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this
LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If
terms are not acceptable, return at once unopened.
[Alion, Balance Flexx, Capreno, CROPSHIELD and Design; DEF, Degree, DiFlex, Drop, Harness, Laudis,
Nortron, Rely, Roundup, Roundup PowerMAX and Design, Roundup Ready, Roundup Ready 2 Yield,
Roundup Ready PLUS and Design, [ ALTERNATE BRAND NAME and DESIGN ], TripleFLEX, Transorb
and Design, TruFlex, VaporGrip, Warrant, Xtend, XtendFlex, and XtendiMax] are [registered] trademarks
of Bayer Group.
[Optional text, if applicable: All other trademarks are the property of their respective owners.]

For MEDICAL and TRANSPORTATION Emergency ONLY Call 24 hours a day 1-800-334-7577.
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2987)
©[Year]
Packed for [Alternative text: Produced for] [Alternative text: Manufactured for]:
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI, 63167 USA
[Insert print plate number]
[Insert barcode]

Master Label 524-659 Page 114 of 165 Revised June 2021
II. DIRECTIONS FOR USE ON INDUSTRIAL, TURF AND ORNAMENTAL SITES
GLYPHOSATE GROUP 9 HERBICIDE
[INSERT BRAND NAME] [Logo]
Complete Directions for Use
EPA Reg. No. 524-659
A [ Optional text: complete] broad-spectrum postemergence herbicide for industrial, turf, ornamental,
forestry, roadside, utility rights-of-way, [ Optional text, if applicable: select crop,] and other listed terrestrial
weed control.
(For a complete list of terrestrial use sites, see the Directions for Use section of this label.)
[Optional label text:
 FOR CHEMICAL SPILL, LEAK, FIRE, OR EXPOSURE, CALL CHEMTREC AT (800)
424-9300]
[Optional label text: For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 hours a day 1-
800-334-7577]
[Optional label text: For PRODUCT USE information Call 1-866-99BAYER (1-866-992-2937]
[Optional statement for limited-geography product distribution: This product is not registered in all states.]
[Additional optional statements for limited-geography product distribution: For control of annual and
perennial weeds in [list states and or county-level information, as appropriate, where product is registered
and distributed]. [Optional text: *County Distribution:] [ Optional text: see inside for details.] [ Optional text:
In [list states] this product is distributed in the counties listed below:] [list counties by state]
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [ Optional text: GREEN] STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [ Optional text, if
applicable: EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY ® AND OTHER LISTED
GLYPHOSATE TOLERANT CROPS,] AS SEVERE PLANT INJURY OR DESTRUCTION COULD
RESULT.
[Optional label statement: Roundup
® – Powerful Performance at a Practical Price]
[Optional label statement: TrueBlue Advantage – Proven – Reliable – Supported (Logo)]
[Optional label statement: A member of the Roundup Family of Herbicides by Bayer CropScience]
[Optional label statement: A member of the Roundup Family of Agricultural Herbicides by Bayer
CropScience]
[Optional label statement, if applicable: See attached labeling [ Alternative text: See inside] for Complete
Directions for Use [Optional text: in English and Spanish].
[Optional label statement for container labels with attached labeling: See Complete Directions for Use
attached to this label [Alternative text: See attached label booklet] for complete [Optional text, as applicable:
Agricultural [and Non-Agricultural] Use Requirements of the Worker Protection Standard, Directions for Use
[and] Limit of Warranty and Liability] [Optional text: in English and Spanish]
Read the entire label before using this product.
Use only according to label directions.

APPENDIX 2
Master Label 524-659 Page 115 of 165 Revised June 2021
Not all products listed on this label are registered for use in California. Check the registration status of each
product in California before using.
Read the “LIMIT OF WARRANTY AND LIABILITY” statement [Optional text, if applicable: at the end of this
labeling] [Alternative optional text, if applicable: on side panel] [ Alternative optional text, if statement not
included on the container label: at the end of the label] before buying or using. If terms are not acceptable,
return at once unopened.
[Insert net contents, as appropriate: NET [insert appropriate value or leave blank line for refillable container]
GAL [or other appropriate unit of measure] [Alternative text: NET CONTENTS] [Alternative label statement
for transport vehicles only: NET [Optional: CONTENTS]: See Bill of Lading]
LOT [Insert Lot number or blank space ] [Alternative label statement for transport vehicles only: LOT: See
Bill of Lading]
[Optional text for container labels: ATTACH COMPLETE DIRECTIONS FOR USE HERE]
[Optional text for container labels with attached Directions for Use labeling that will be hidden behind the
attached labeling and only become visible if the labeling is removed: COMPLETE DIRECTIONS FOR USE
HAVE BEEN REMOVED]
CONTENTS
1 1.0 INGREDIENTS
2 2.0 IMPORTANT PHONE NUMBERS
3 3.0 PRECAUTIONARY STATEMENTS
 3.1 Hazards to Humans and Domestic Animals
 3.2 Environmental Hazards
 3.3 Physical or Chemical Hazards
4 4.0 STORAGE AND DISPOSAL
5 5.0 PRODUCT INFORMATION
6 6.0 WEED RESISTANCE MANAGEMENT
 6.1 Weed Management Practices
 6.2 Management of Glyphosate-Resistant Biotypes
7 7.0 MIXING
 7.1 Mixing with Water
 7.2 Tank Mixtures
 7.3 Tank-Mixing Procedure
 7.4 Mixing Spray Solution Concentrations
 7.5 Surfactants [ This section optional in the final printed label]
 7.6 Ammonium Sulfate [ This section optional in final printed label]
 7.7 Colorants and Dyes
 7.8 Drift Reduction Additives
8 8.0 APPLICATION EQUIPMENT AND TECHNIQUES
 8.1 Spray Drift Management
 8.2 Aerial Application Equipment
 8.3 Ground Application Equipment
 8.4 Handheld Sprayers
 8.5 Selective Application Equipment
 8.6 Injection Systems
 8.7 Controlled Droplet Applicator (CDA)

APPENDIX 2
Master Label 524-659 Page 116 of 165 Revised June 2021
9 9.0 TERRESTRIAL USE SITES
10 10.0 ADDITIONAL SITE MANAGEMENT INFORMATION
 10.1 Commercial, Residential and Recreational Area Management
 10.2 Forestry, Hardwood and Christmas Tree Management
 10.3 Native and Wildlife Habitat Management
 10.4 Ornamental and Production Nursery Management
 10.5 Pasture Management
 10.6 Railroad Management
 10.7 Rangeland Management
 10.8 Roadside Management
 10.9 Utility Management
11 11.0 CROP USES [This section is optional; appropriate subsections added at time of printing]
12 12.0 WEEDS CONTROLLED
 12.1 Weed Control, Renovation and Chemical Mowing in Turf
 12.2 Annual Weeds
 12.3 Perennial Weeds
 12.4 Woody Brush, Trees and Vines
13 13.0 TANK-MIX PRODUCT INFORMATION [this section printed only if required]
14 14.0 LIMIT OF WARRANTY AND LIABILITY
1.0 INGREDIENTS
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt ................................... 51.2%
OTHER INGREDIENTS: ..................................................................................................................... 48.8%
 100.0%
*Contains 705 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter or 5.88
pounds per U.S. gallon, which is equivalent to 575 grams of the acid, glyphosate, per liter or 4.8 pounds
per U.S. gallon (41.8% by weight).
[Optional label text that will be updated at the time of printing, if necessary: This product is protected by
[Optional text: one or more of the following] U.S. Patent No’s. 5,668,085 and 6,365,551.
[Optional label text, if applicable: Other patents pending]
[Optional label text, if applicable: No license granted under any non-U.S. patent(s)]
[Option to insert reference to a Patent Website: For a list of patents, if any, covering this product or its use,
go to www.monsantotechnology.com]
EPA Est. [Insert appropriate EPA establishment number: 524-IA-1; 524-LA-1; or Other; or blank space]
[Optional text: (Establishment Number when entered here supersedes all others)]
[Alternative EPA establishment text: EPA Est. (L) 524-LA-1 or (M) 524-IA-1 Lot number prefix (L) or (M)
indicate appropriate establishment number.] [ This lot number relationship with the establishment number
can be expanded or changed to include additional or add new producing sites, as appropriate. ]
2.0 IMPORTANT PHONE NUMBERS
For MEDICAL and TRANSPORTATION Emergencies ONLY Call 24 Hours a Day 1-800-334-7577

APPENDIX 2
Master Label 524-659 Page 117 of 165 Revised June 2021
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2937)
3.0 PRECAUTIONARY STATEMENTS
3.1 Hazards to Humans and Domestic Animals
Keep out of reach of children
CAUTION
Causes moderate eye irritation. Avoid contact with eyes or clothing.
[Optional label statement, if applicable: See inside [Alternative text: See back panel] for additional]
[Optional text, as applicable: Precautions [and] First Aid]
FIRST AID
IF IN EYES x Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
x Remove contact lenses, if present, after the first 5 minutes then continue rinsing
eye.
x Call a poison control center or doctor for treatment advice.
IF ON SKIN OR
CLOTHING
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15 to 20 minutes.
x Call a poison control center or doctor for treatment advice.
x Have the product container or labeling with you when calling a poison control center or doctor, or
going for treatment.
x For emergency medical treatment information call toll-free 24 hours a day 1-800-334-7577.
x This product is identified as [INSERT BRAND NAME], EPA Registration No. 524-659
[Optional text, if applicable: LABEL CONTINUED ON BACK]
DOMESTIC ANIMALS: This product is considered to be relatively nontoxic to dogs and other domestic
animals; however, ingestion of this product or large amounts of freshly sprayed vegetation could result in
temporary gastrointestinal irritation (vomiting, diarrhea, colic, etc.). If such symptoms are observed, provide
the animal with plenty of fluids to prevent dehydration. Call a veterinarian if symptoms persist for more than
24 hours.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear: long-sleeved shirt and long pants, socks and shoes.
Follow manufacturer’s instructions for cleaning/maintaining PPE (Personal Protective Equipment). If there
are no instructions for washables, use detergent and hot water. Keep and wash PPE separately from other
laundry.
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the
handler PPE requirements may be reduced or modified as specified in the WPS.
IMPORTANT: When reduced PPE is worn because a closed system is being used, handlers must be
provided all PPE specified above for “applicators and other handlers” and have such PPE immediately
available for use in an emergency, such as a spill or equipment breakdown.

APPENDIX 2
Master Label 524-659 Page 118 of 165 Revised June 2021
User Safety Recommendations:
Users should:
y Wash hands thoroughly after handling and before eating, drinking, chewing gum, using tobacco, or using
the toilet.
y Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean
clothing.
3.2 Environmental Hazards
Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean
high-water mark. Do not contaminate water when cleaning equipment or disposing of equipment wash
waters and rinsate.
3.3 Physical or Chemical Hazards
Spray solutions of this product may be mixed, stored and applied using stainless steel, fiberglass, plastic
or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS. This product or spray solutions of this product react with such containers and tanks to produce
hydrogen gas, which can form a highly combustible gas mixture. This gas mixture could flash or explode if
ignited by open flame, spark, welder’s torch, lighted cigarette or other ignition source and cause serious
personal injury.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling. This product
may only be used in accordance with the Directions for Use on this label or on separately published
supplemental labeling. Supplemental labeling for this product can be obtained from your authorized Bayer
CropScience retailer or company representative.
Do not apply this product in a way that will contact workers or other persons, either directly or through drift.
Only protected handlers may be in the area during application. For any requirements specific to your State
or Tribe, consult the agency responsible for pesticide regulation.


Agricultural Use Requirements
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part
170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
decontamination, notification, and emergency assistance. It also contains specific instructions and
exceptions pertaining to the statements on this label about personal protective equipment (PPE) and
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by
the Worker Protection Standard.
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 4 hours.

APPENDIX 2
Master Label 524-659 Page 119 of 165 Revised June 2021
For early entry to treated areas that is permitted under the Worker Protection Standard and that involves
contact with anything that has been treated, such as plants, soil, or water, wear: coveralls, socks and shoes,
and waterproof gloves.

Non-Agricultural Use Requirements
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is
used to produce agricultural plants on farms, forests, nurseries or greenhouses.
Keep people and pets off treated areas until spray solution has dried.
[Optional label text for container labels with attached labeling: See complete Directions for Use attached to
this label for complete [ Optional text, as applicable: Agricultural [and Non-Agricultural] Use Requirements
of the Worker Protection Standard, Directions for Use [and] Limit of Warranty and Liability] [Optional text, if
applicable: in English and Spanish]
4.0 STORAGE AND DISPOSAL
STORAGE AND DISPOSAL
Proper pesticide storage and disposal are essential to protect against exposure to people and the
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product to
contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination. [ Optional label text, if applicable for
separate Directions for Use labeling: See individual container label for additional storage conditions, if any.]
PESTICIDE DISPOSAL: To avoid wastes, use all material in the container, including rinsate, by application
according to label directions. If wastes cannot be avoided, offer remaining product to a waste disposal
facility or pesticide disposal program. Such programs are often run by state or local governments or by
industry. All disposal must be in accordance with applicable federal, state and local regulations and
procedures.
CONTAINER HANDLING AND DISPOSAL: [Optional label text if applicable for separate Directions for
Use labeling: See label attached to the container for container handling and disposal instructions and
refilling limitations.]

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID CONTAINERS OF LESS THAN 1-GALLON CAPACITY ]
Nonrefillable container. Do not reuse or refill the[/this] container.
[Alternative container statement: Nonrefillable container. Do not reuse the container to hold materials other
than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily
hold rinsate or other pesticide-related materials in the container. Contact your state regulatory agency to
determine allowable practices in your state.]
Triple rinse the[/this] container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake
for 10 seconds. Pour rinsate into application equipment or mix-tank, or store rinsate for later use or

APPENDIX 2
Master Label 524-659 Page 120 of 165 Revised June 2021
disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure two more
times.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. [Alternative container disposal statement: Then offer the container
for recycling, if available.
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.]

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID PLASTIC 2.5-GALLON CONTAINER AND OTHER NONREFILLABLE
CONTAINERS OF GREATER THAN 1-GALLON, BUT EQUAL TO OR LESS THAN 5-GALLON
CAPACITY]
Nonrefillable container. Do not reuse the[/ this] container to hold materials other than pesticides or dilute
pesticides (rinsate). After emptying and cleaning, it may be allowable to temporarily hold rinsate or other
pesticide-related materials in the[/ this] container. Contact your state regulatory agency to determine
allowable practices in your state.
[Alternative container statement: Nonrefillable container. Do not reuse or refill the[/this] container.]
Triple rinse or pressure rinse (or equivalent) the[/this] container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake
for 10 seconds. Pour rinsate into application equipment or mix-tank, or store rinsate for later use or
disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure two more
times.
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle into the side of the container and rinse at about 40 PSI for at least 30 seconds.
Continue to drain for 10 seconds after the flow begins to drip.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. [Alternative container disposal statement: Then offer the container
for recycling, if available.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937) [Alternative telephone numbers:
1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR
NONREFILLABLE RIGID PLASTIC 30-GALLO N CONTAINER AND OTHER NONREFILLABLE
CONTAINERS OF GREATER THAN 5-GALLON CAPACITY]
Nonrefillable container. Do not reuse or refill the[/this] container.

APPENDIX 2
Master Label 524-659 Page 121 of 165 Revised June 2021
[Alternative container statement: Nonrefillable container. Do not reuse the [/this] container to hold materials
other than pesticides or dilute pesticides (rinsate). After emptying and cleaning, it may be allowable to
temporarily hold rinsate or other pesticide-related materials in the container. Contact your state regulatory
agency to determine allowable practices in your state.]
Triple rinse or pressure rinse (or equivalent) the[/this] container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank. [Optional label
text: For containers not equipped with pumping systems.] Fill the container ¼ full with water. Replace and
tighten closures. Tip the container on its side and roll it back and forth for 30 seconds, ensuring at least one
complete revolution. Stand the container on its end and tip it back and forth several times. Turn the container
over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment
or mix-tank, or store rinsate for later use or disposal. Repeat this procedure two more times.
[Alternative or additional triple rinsing instructions for large containers equipped with pumping systems:
[Optional label text: For large containers equipped with pumping systems,] Fill the container about 10
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump
rinsate into application equipment or rinsate collection system. Repeat this procedure two more times.]
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle into the side of the container and rinse at about 40 PSI for at least 30 seconds.
Continue to drain for 10 seconds after the flow begins to drip.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
container collection site or picked up for recycling. [ Alternative container disposal statement: Then offer
the container for recycling, if available.]
[Optional container disposal statement: Some container manufacturers offer container recycling. See
additional information regarding manufacturer recycling programs attached to the[/ this] container, if
available. If no recycling information is available on the[/ this] container, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937) [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)] to find the nearest recycling location].]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone
numbers: 1-800-ROUNDUP (1-800-768-6387)].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Optional container disposal statement: Return Properly Rinsed Container for Recycling – Call 1-866-
99BAYER (1-866-992-2937)] [Alternative telephone numbers: 1-800-ROUNDUP (1-800-768-6387)]
[Optional container disposal statement: IBC EMPTY? – FREE CALL – 1-888-SCHUETZ (1-888-724-8389)
www.schuetz.net/ticket; Schuetz ticket service]
[Optional container disposal statement: FREE IBC PICKUP] [For continental USA and Canada only.]
[Optional container disposal statement: RETURNnet SYSTEM – To return empty IBC’s Email or Call –
www.returnnetsystem.com – 1-888-758-SHIP – United States and Canada (1-888-758-7447 – IBCNA –
Clarkston, Michigan – USA]

[CONTAINER HANDLING AND DISPOSAL STATEMENT AND REFILLING LIMITATION FOR ALL
REFILLABLE CONTAINERS, EXCEPT TRANSPORT VEHICLES]

APPENDIX 2
Master Label 524-659 Page 122 of 165 Revised June 2021
Refillable container. Refill the[/this] container with pesticide only. Do not reuse the[/this] container for any
other purpose.
Cleaning the[/this] container before refilling is the responsibility of the refiller. Cleaning the[/ this] container
before final disposal is the responsibility of the person disposing of the container.
To clean the[/ this] container before final disposal, empty the remaining contents from the container into
application equipment or mix-tank. Fill the container about 10 percent full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate
collection system. Repeat this procedure two more times.
Then offer the container for recycling, if available.
[Optional container disposal statement: Some container manufacturers offer container recycling. See
additional information regarding manufacturer recycling programs attached to the[/ this] container, if
available. If no recycling information is available on the container, contact your chemical dealer [ Optional
text: or Bayer CropScience at 1-866-99BAYER (1-866-992-2937) [ Alternative telephone numbers: 1-800-
ROUNDUP (1-800-768-6387)] to find the nearest recycling location].]
If recycling is not available, dispose of in accordance with federal, state and local regulations and
procedures, which may include puncturing the properly rinsed container and disposing in a sanitary landfill.
[Optional container disposal statement: IBC EMPTY? – FREE CALL – 1-888-SCHUETZ (1-888-724-8389)
www.schuetz.net/ticket; Schuetz ticket service]
[Optional container disposal statement: FREE IBC PICKUP] [For continental USA and Canada only.]
[Optional additional container disposal statement: RETURNnet SYSTEM – To return empty IBC’s Email or
Call – www.returnne tsystem.com – 1-888-758-SHIP – United St ates and Canada (1-888-758-7447 –
IBCNA – Clarkston, Michigan – USA]
[Optional container disposal statement: To obtain information about recycling refillable containers, contact
Bayer CropScience at 1-866-99BAYER (1-866-992-2937)] [ Alternative telephone numbers: 1-800-
ROUNDUP (1-800-768-6387)].
[Optional container disposal statement: Return Properly Rinsed Container for Recycling – Call 1-866-
99BAYER (1-866-992-2937) [Alternative telephone numbers: 1-800-ROUNDUP (1-800-768-6387)]

[CONTAINER HANDLING AND DISPOSAL STATEMENT FOR ALL TRANSPORT VEHICLES, AS
DEFINED IN 40 CFR 156.3]
Emptied container retains vapor and product residue. Observe all precautions stated on this label until the
container is cleaned, reconditioned or destroyed. Prior to refilling, inspect carefully for damage such as
cracks, punctures, abra sions, and worn-out threads and closur es. Clean thoroughly before reuse for
transportation of a material of different composition or before retiring this transport vehicle from service.
[Additional label statement for transport vehicles only: FOR BULK PESTICIDE TRANSPORT ONLY]
[Additional label statement for transport vehicles only: THIS LABEL FOR USE WITH TRANSPORT
VEHICLES ONLY]

[STORAGE AND DISPOSAL FOR THE NONREFILLABLE SMART-PAK CONTAINER – A COMPOSITE
PACKAGING CONSISTING OF A LIGHTWEIGHT PLASTIC CONTAINER INSIDE RIGID CARDBOARD
PACKAGING. ONCE IT IS FILLED, THE LIGHTWEIGHT PLASTIC CONTAINER IS NOT STORED,
TRANSPORTED OR SOLD WITHOUT THE OUTER CARDBOARD PACKAGING. ]
Proper pesticide storage and disposal are essential to protect against exposure to people and the

APPENDIX 2
Master Label 524-659 Page 123 of 165 Revised June 2021
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this product to
contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary
supplies. Keep container closed to prevent spills and contamination. Do not store the [ this] container
unprotected from the weather, especially precipitation, for extended periods of time. DO NOT REMOVE
THE PLASTIC CONTAINER FROM THE PACKAGE UNTIL IT HAS BEEN EMPTIED AND PROPERLY
RINSED.
PESTICIDE DISPOSAL: To avoid wastes, use all material in the [ this] container, including rinsate, by
application according to label directions. If wastes cannot be avoided, offer remaining product to a waste
disposal facility or pesticide disposal program. Such programs are often run by state or local governments
or by industry. All disposal must be in accordance with applicable federal, state and local regulations and
procedures.
CONTAINER HANDLING AND DISPOSAL: Nonrefillable container. Do not reuse or refill the [ this]
container.
Triple rinse or pressure rinse (or equivalent) the inner plastic container promptly after emptying.
Triple rinse as follows: Empty the remaining contents into application equipment or mix-tank and continue
to drain for 10 seconds after the flow begins to drip. Fill the inner plastic container ¼ full with water and
recap. Shake for 10 seconds. Pour rinsate into the application equipment or mix-tank, or store rinsate for
later use or disposal. Continue to drain for 10 seconds after the flow begins to drip. Repeat this procedure
two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or mix-tank and
continue to drain for 10 seconds after the flow begins to drip. Place container so that it can drain directly
into application equipment or mix-tank while rinsing or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle through the bottom of the container, ensuring that you puncture the inner plastic
container, and rinse at about 40 PSI for at least 30 seconds. Continue to drain for 10 seconds after the
flow begins to drip.
After rinsing, open the outer cardboard packaging and remove the inner plastic container.
Once properly rinsed, some plastic [ Optional text: agricultural] pesticide containers can be taken to a
collection site or picked up for recycling. Recycle the cardboard separately. [Alternative container disposal
statement: Then offer the outer cardboard packaging and inner plastic container for recycling, if available.]
[Optional container disposal statement: To find the nearest collection site, contact your chemical dealer
[Optional text: or call 1-866-99BAYER (1-866-992-2937).]
If recycling is not available, dispose of each component in accordance with federal, state and local
regulations and procedures, which may include puncturing the properly rinsed inner plastic container and
disposing both the outer cardboard packaging and inner plastic container in a sanitary landfill.
[The inner plastic container of the Smart-Pak must be labeled with the following information ]
[INSERT BRAND NAME] [Logo optional]
ACTIVE INGREDIENT:
*Glyphosate, N-(phosphonomethyl) glycine, in the form of its potassium salt ................................... 51.2%
OTHER INGREDIENTS: .................................................................................................................... 48.8%
 100.0%
*Contains 705 grams of the active ingredient glyphosate, in the form of its potassium salt, per liter or 5.88
pounds per U.S. gallon, which is equivalent to 575 grams of the acid, glyphosate, per liter or 4.8 pounds
per U.S. gallon (41.8% by weight).

APPENDIX 2
Master Label 524-659 Page 124 of 165 Revised June 2021
Keep out of reach of children
CAUTION
EPA Reg. No. 524-659
UNLESS THIS PLASTIC CONTAINER IS EMPTY AND HAS BEEN PROPERLY RINSED FOR
DISPOSAL, IT IS NOT TO BE REMOVED FROM ITS OUTER CARDBOARD PACKAGING. FOR MORE
INFORMATION, CALL 1-899-99BAYER (1-866-992-2937).
[Optional Smart-Pak container label statements:
- Protect this package from precipitation until emptied and properly rinsed.
- Use the cap to cut the foil seal.
- Invert cap over foil seal and rotate clockwise to cut the foil seal. Remove foil seal.
- East to Handle
- Uses less plastic than ordinary [Alternative text: typical] jugs
- Produces less plastic waster than ordinary [Alternative text: typical] jugs
- Compact Design
- Space Efficient
- Stackable
- Easy to Use
- Easy to Pour
- Easy to Recycle]
5.0 PRODUCT INFORMATION
Product Description: This product is a postemergence, systemic herbicide with no soil residual activity.
This product provides broad-spectrum control of many annual and perennial weeds, woody brush, trees
and vines. It is formulated as a water-soluble liquid containing surfactant that may be applied using standard
and specialized pesticide application equipment after dilution and thorough mixing with water or other
carriers according to label directions.
[Optional label text: Do not add [Optional label text: surfactants, additives containing surfactants,] buffering
agents or pH adjusting agents to the spray solution when [ INSERT BRAND NAME ] is the only pesticide
being applied unless otherwise directed. See the “MIXING” section of this label for instructions regarding
other additives.]
[Optional label text: No additional surfactant in the spray solution is needed. This includes additives
containing surfactants, buffering agents or pH adjusting agents when [INSERT BRAND NAME] is the only
pesticide used unless otherwise directed.]
Mechanism of Action: Glyphosate works by targeting an enzyme that is essential for plant growth.
No Soil Activity: This product binds tightly to soil particles and does not provide residual weed control.
Weeds must be emerged at the time of application to be controlled by foliar application of this product.
Weed seeds in the soil will not be affected by this product and will continue to germinate. Unattached plant
rhizomes and rootstocks beneath the soil surface will also not be affected by this product.
Biological Degradation: Degradation of this product is primarily a biological process carried out by soil
microbes.
Stage of Weeds: Annual weeds are easiest to control when they are small. Performance of this product
on most perennial weeds is best when applied at late growth stages approaching maturity. Refer to the
“WEEDS CONTROLLED” section of this label for more information on the control of specific weeds.

APPENDIX 2
Master Label 524-659 Page 125 of 165 Revised June 2021
Cultural Considerations: Reduced weed control could result when this product is applied to annual or
perennial weeds that have been mowed, grazed or cut, and have not been allowed to re-grow prior to
application. Always use a higher application rate of this product within a given range when weed growth is
heavy or dense, or when weeds are growing in an undisturbed (non-cultivated) area. Reduced weed control
could also result when this product is applied to weeds that show signs of disease or insect damage, are
covered with dust, or are surviving under poor growing conditions.
Spray Coverage: For best results with this product, spray coverage must be uniform and complete. Do
not spray foliage to the point of runoff.
Rainfastness: Rainfall within 4 hours of application could wash this product off of the foliage and a second
application might then be needed to achieve adequate weed control. Refer to specific use sections of this
label for additional information on the minimum intervals required before re-application of this product.
Time to Symptoms: This product moves through the plant from the point of foliage contact to and into the
root system. Visible effects are a gradual wilting and yellowing of the plant that advances to complete
browning of aboveground growth and deterioration of underground plant parts. Effects are visible on most
annual weeds within 2 to 4 days, but on most perennial weeds, effects might not be visible for 7 or more
days after application. Extremely cool or cloudy weather following application could slow activity of this
product and delay development of visual symptoms.
Maximum Application Rates: The maximum application or use rates stated throughout this label are
given in units of volume (fluid ounces or quarts) of this product per acre. However, the maximum allowable
application rates apply to this product combined with the use of any and all other herbicides containing the
active ingredient glyphosate, whether applied separately or in a tank mixture, on a basis of total pounds of
glyphosate (acid equivalents) per acre. If more than one glyphosate-containing product is applied to the
same site within the same year, you must ensure that the total use of glyphosate (pounds acid equivalents)
does not exceed the maximum allowed. See the “INGREDIENTS” section of this label for necessary product
information.
Unless otherwise specified on this label, the combined total of all applications of this product on a site must
not exceed 6.75 quarts (8 pounds of glyphosate acid) per acre per year.
Unless otherwise specified on this label in the sections that follow, the maximum single application rate of
this product is 3.125 quarts (3.75 pounds of glyphosate acid) per acre. Unless otherwise specified on this
label, multiple applications of this product made be made onto a site up to the maximum annual application
rates defined above. Allow a minimum of 14 days between applications.
The following table provides the glyphosate application rate (pounds of glyphosate acid equivalents per
acre) when this product is applied at the application rates indicated (fluid ounces or quarts of this product
per acre).
Application Rate of
[INSERT BRAND NAME]
(amount of product per acre)
Application Rate of
Glyphosate Acid Equivalent (ae)
(pounds of ae per acre)
2.5 fluid ounces 0.094
4 fluid ounces 0.15
10 fluid ounces 0.375
15 fluid ounces 0.56
18 fluid ounces 0.675
20 fluid ounces 0.75
30 fluid ounces 1.125

APPENDIX 2
Master Label 524-659 Page 126 of 165 Revised June 2021
34 fluid ounces 1.275
36 fluid ounces 1.35
40 fluid ounces 1.5
50 fluid ounces 1.875
60 fluid ounces 2.25
3.125 quarts 3.75
3.75 quarts 4.5
5 quarts 6.0
6.75 quarts 8.1
To determine the glyphosate acid equivalents (pounds of glyphosate ae per acre) for application rates of
[INSERT BRAND NAME] not listed here, multiply the application rate (fluid ounces per acre) by 0.0375.
Application Rate (fluid ounces per acre) x 0.0375 = Pounds of Glyphosate (ae) per acre
6.0 WEED RESISTANCE MANAGEMENT
Glyphosate, the active ingredient in this product, is a Group 9 herbicide based on the mechanism of action
classification system of the Weed Science Society of America. Any weed population can contain plants that
are naturally resistant to Group 9 herbicides. Weeds resistant to Group 9 herbicides can be effectively
managed by using another herbicide from a different Group (either alone or in a mixture according to label
directions), by using other cultural or mechanical methods of weed control, or a combination of the two.
Consult your local company representative, state cooperative extension agent, professional consultant or
other qualified authority to determine appropriate actions for controlling specific resistant weeds.
6.1 Weed Management Practices
Resistant populations arise when rare individual plants are uncontrolled by a normal dose of a given
herbicide under normal environmental conditions. In the absence of other control measures these
individuals survive, produce seed, and eventually become the dominant biotype in the field through
continuous selection. The best means of reducing this selection is to use diverse weed control practices
such as multiple herbicides with different mechanisms of action, and often in combination with various
mechanical and cultural practices.
Suspected herbicide resistance can be identified by these factors:
x Failure to control a weed species normally controlled by the herbicide at the dose applied, especially
when control is achieved on adjacent weeds.
x A spreading patch of non-controlled plants of a particular species.
x Surviving plants mixed with controlled individuals of the same species.
To minimize the occurrence of glyphosate-resistant biotypes, including those resistant to glyphosate,
implement the following weed management practice options that are practical to your situation. These
management practices are applicable to reduce the spread of suspected or confirmed resistant biotypes
(managing existing resistant biotypes) and to reduce the potential for selecting for resistance in new species
(proactive resistance management).
x Use a diversified approach toward weed management focused on preventing weed seed production and
reducing the number of weed seeds in the soil.
x Plant crops into fields that are as weed-free as possible and then keep them as weed-free as possible.

APPENDIX 2
Master Label 524-659 Page 127 of 165 Revised June 2021
x Plant seed that is as weed-free as possible.
x Scout fields and application sites routinely, before and after herbicide application.
x Use multiple herbicide mechanisms of action that are effective against the most troublesome weeds on
your application site and against those with known resistance.
x Apply herbicides at application rates listed on the label when weeds are within the size range indicated
on the label.
x Emphasize cultural practices that suppress weeds by using crop competiveness.
x Use mechanical and biological weed management practices, where appropriate.
x Prevent field-to-field and within-field movement of weed seed or vegetative propagules.
x Manage weed seed at harvest and after harvest to prevent a buildup of the weed seedbank
6.2 Management of Glyphosate-Resistant Biotypes
Appropriate testing is needed to determine if a weed is resistant to glyphosate. Call 1-866-99BAYER (1-
866-992-2937) or contact your Bayer CropScience representative to report any incidence of non-
performance of this product against a particular weed species. To determine if resistance in any particular
weed biotype has been confirmed in your area, or for additional information on glyphosate-resistant
biotypes, go to www.weedscience.org.
Glyphosate-resistant weeds can be controlled or managed by applying this product in combination with
residual preemergence herbicides and/or other postemergence herbicides labeled for control of the
targeted weed in the crop being grown or on the site of application. For more information, see the “WEEDS
CONTROLLED” section of this label.
Since the occurrence of resistant weeds is difficult to detect before use, to the extent consistent with
applicable law, Bayer CropScience accepts no liability for any losses that result from the failure of this
product to control resistant weeds.
7.0 MIXING
Spray solutions of this product may be mixed, stored and applied using clean stainless steel, fiberglass,
plastic or plastic-lined steel containers.
DO NOT MIX, STORE OR APPLY THIS PRODUCT OR SPRAY SOLUTIONS OF THIS PRODUCT IN
GALVANIZED STEEL OR UNLINED STEEL (EXCEPT STAINLESS STEEL) CONTAINERS OR SPRAY
TANKS.
Eliminate any risk of siphoning the contents of the tank back into the carrier source while mixing. Use
approved anti-back-siphoning devices where required by State or local regulations.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.
Clean sprayer parts promptly after using this product by thoroughly flushing with water.
7.1 Mixing with Water
PERFORMANCE OF THIS PRODUCT CAN BE SIGN IFICANTLY REDUCED IF WATER CONTAINING
SOIL SEDIMENT IS USED AS CARRIER. DO NO T MIX THIS PRODUCT WITH WATER FROM PONDS
OR DITCHES THAT IS VISIBLY MUDDY OR MURKY.
This product mixes readily with water. Mix spray solutions of this product as follows. Begin filling the mixing
tank or spray tank with clean water. Add the required amount of this product near the end of the filling
process and mix gently. Foaming of the spray solution can occur during mixing. To prevent or minimize

APPENDIX 2
Master Label 524-659 Page 128 of 165 Revised June 2021
foaming, mix gently, terminate by-pass and return lines at the bottom of the tank and, if necessary, add an
appropriate anti-foam or defoaming agent to the spray solution.
7.2 Tank Mixtures
This product does not provide residual weed control. This product may be tank-mixed with other herbicides
to provide residual weed control in the soil, a broader weed control spectrum or an alternate mechanism of
action.
Tank mixtures with other herbicides, insecticides, fungicides, micronutrients or foliar fertilizers could result
in reduced weed control. Bayer CropScience has not tested all tank-mix product formulations for
compatibility, antagonism or reduction in product performance. To the extent consistent with applicable
law, buyer and all users are responsible for any and all loss or damage in connection with the use or
handling of mixtures of this product with herbicides or other materials that are not expressly specified on
this label, or on separate Supplemental Labeling or Fact Sheets published for this product.
When a tank-mix with a generic active ingredient, such as 2,4-D or dicamba, or any other product or
material, is listed on this label, it is the responsibility of the pesticide user to ensure that the intended use is
included on the label of the product added to the mix.
Refer to all individual product labels, supplemental labeling and Fact Sheets for all products in the tank
mixture and observe all precautions and limitations on the label, including any application timing and soil
restrictions. Users must follow the most restrictive directions for use and precautionary statements for each
product in the tank mixture.
This product may be applied at any rate listed on this label in a tank mixture with products containing one
or more of the active ingredients listed below [ Optional text: , or one or more of the products listed], to
provide preemergence and/or improved postemergence control of weeds listed on the individual product
labels. [Optional text, only required if the product information is not included in the list below: For more
information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this
label.]


[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; atrazine; dicamba; bromacil; diuron; imazapyr; metsulfuron methyl; oryzalin; pendimethalin,
prodiamine; sulfosulfuron; triclopyr
Arsenal; Arsenal Herbicide Applicators Concentrate; Banvel; Banvel 480; Barricade 4FL; Barricade
65WG; Certainty ® Turf; Chopper Gen2; Crossbow; Endurance; Escort XP; Forestry Garlon 4
Specialty; Forestry Garlon XRT Specialty; Gallery SC; Gallery 75 Dry Flowable Specialty; Garlon
3A Specialty; Garlon 4 Specialty; Garlon 4 Ultra Specialty; Goal 2XL; GoalTender; Habitat; Hyvar
X; Hyvar X-L; Karmex DF; Krenite S Brush Control Agent; Krovar DF; Landmark; Landmark XP;
Oust Extra; Oust XP; Outrider
®; Plateau; Poast; Poast Plus; Ronstar 50 WSP; Ronstar Flo; Ronstar
G; Sahara DG; Spike 20P Specialty; Spike 80 DF Specialty; Stalker; Surflan AS Specialty; Surflan
Flex; Surflan XL 2G; Telar XP; Tordon 101 Mixture Specialty; Tordon 22K Specialty; Tordon K
Herbicide Specialty; Transline Specialty; Vanquish; Velpar DF CU; Velpar DF VU; Velpar L CU;
Velpar L; Velpar L VU]
When used in combination as described on this label, and to the extent consistent with applicable law, the
liability of Bayer CropScience shall in no manner extend to any damage, loss or injury not solely and directly
caused by the inclusion of the Bayer CropScience product in such combination use.

APPENDIX 2
Master Label 524-659 Page 129 of 165 Revised June 2021
7.3 Tank-Mixing Procedure
Always predetermine the compatibility of all tank-mix products together in the carrier by mixing small
proportional quantities in advance.
Add individual tank-mix components to the tank in the following order: wettable powders, flowables,
emulsifiable concentrates, drift reduction additives, water soluble liquids (this product) [ Optional text: ,
surfactants]. Ensure that the tank-mix products are well mixed in the spray solution before adding this
product.
Mix only the quantity of spray solution that will be applied that day. Application of tank-mix solutions that
are allowed to stand overnight could result in reduced weed control.
Maintain gentle agitation at all times until the contents of the tank are sprayed out. If the spray mixture is
allowed to settle, agitate thoroughly to resuspend the mixture before resuming application.
Keep by-pass line on or near the bottom of the tank to minimize foaming.
A 50-mesh nozzle screen or line strainer on the spray equipment is adequate.
7.4 Mixing Spray Solution Concentrations
All reference throughout this label to concentration of this product in a spray solution is on a percentage-
of-volume basis.
Prepare the desired volume of spray solution at a given concentration by mixing the amount of this product
indicated in the following table in water.
Desired Volume of
Spray Solution
Amount of [INSERT BRAND NAME]
to Achieve Indicated Concentration in Spray Volume
(percent by volume)
0.3% 0.6% 0.9% 1.3% 3.1% 6.2%
1 gallon 0.4 fl oz 0.8 fl oz 1.2 fl oz 1.7 fl oz 4 fl oz 8 fl oz
25 gallons 10 fl oz 0.6 qt 0.9 qt 1.3 qt 3.1 qt 6.2 qt
100 gallons 1.2 qt 2.4 qt 3.6 qt 1.3 gal 3.1 gal 6.2 gal
2 tablespoons = 1 fluid ounce (fl oz)
For filling backpack and pump-up sprayers, consider mixing the appropriate amount of this product with
water in a larger container and then filling the sprayer from the larger container.
7.5 Surfactants [this section is optional in the final printed label]
Although not always required, nonionic surfactants that are labeled for use with herbicides may may be
added to spray solutions of this product. Do not reduce application rates or concentration of this product
when applying in spray solutions containing additional surfactant.
[Optional text: Additional surfactant can increase the performance of this product at water carrier volumes
above 30 gallons per acre or at application rates below 15 fluid ounces of product per acre.]
[Optional text: Use a surfactant concentration of 0.25 to 0.5 percent (1 to 2 quarts per 100 gallons of spray
solution) when adding surfactant that contains at least 70 percent active ingredient, or a 1-percent
surfactant concentration (4 quarts per 100 gallons of spray solution) when adding surfactant that contains
less than 70 percent active ingredient.]
Read and follow the directions for use and observe all precautionary statements and other information on
the surfactant label.

APPENDIX 2
Master Label 524-659 Page 130 of 165 Revised June 2021
[Optional text: DO NOT add buffering agents or pH adjusting agents to the spray solution when [ INSERT
BRAND NAME] is the only pesticide product being applied.]
7.6 Ammonium Sulfate [This section optional in final printed label]
Unless otherwise directed, the addition of 1 to 2 percent dry ammonium sulfate by weight (8.5 to 17 pounds
per 100 gallons of water), could increase the performance of this product on annual and perennial weeds,
particularly under hard water conditions, drought conditions or when tank-mixed with certain residual
herbicides. An equivalent amount of a liquid formulation of ammonium sulfate may also be used. Ensure
that dry ammonium sulfate is completely dissolved in the spray tank before adding herbicides. Thoroughly
rinse the spray system with clean water promptly after use to reduce corrosion.
When using ammonium sulfate, apply this product at rates or spray solution concentrations as directed on
this label; lower rates or concentration could result in reduced performance.

7.7 Colorants and Dyes
Colorants and marking dyes may be added to spray solutions of this product; however, they can reduce the
performance of this product. Use colorants and dyes according to the manufacturer's directions.
7.8 Drift Reduction Additives
Drift reduction additives may be used with all application equipment types, except wiper applicators, sponge
bars and controlled droplet applicators (CDA). However, use of drift reduction additives can affect spray
coverage, which could reduce the performance of this product. When a drift reduction additive is used, read
and carefully follow all directions for use, precautions, limitations, and other information on the product
label.
8.0 APPLICATION EQUIPMENT AND TECHNIQUES
This product may be applied with the following equipment:
Aerial Application Equipmentfixed-wing and helicopter [Alternative text: helicopter only] [Optional text:
(Aerial application allowed by helicopter only in] [list states where aerial application is allowed by helicopter
only, if applicable])
Ground Application Equipment boom or boomless systems, pull-type sprayers, floaters, pick-up
sprayers, spray coupes and other ground broadcast application equipment
Handheld Sprayers backpack sprayers, pump-up pressure sprayers, handguns, handwands,
mistblowers*, lances and other handheld and motorized spray equipment used to direct the spray onto
unwanted foliage
*This product is not registered in California or Arizona for use in mistblowers.
Selective Application Equipmentrecirculating sprayer, shielded and hooded sprayers, wiper applicator,
sponge bar, single or hollow stem injectors, tree injector, spray bottle
Injection Systemsaerial or ground injection sprayers
Controlled Droplet Applicator (CDA) handheld or boom-mounted applicators that produce a spray
pattern consisting of a narrow range of droplet sizes
APPLY THIS PRODUCT USING PROPERLY MAINTAINED AND CALIBRATED EQUIPMENT CAPABLE
OF ACCURATELY DELIVERING DESIRED VOLUMES.
Do not apply this product through any type of irrigation system.
8.1 Spray Drift Management

APPENDIX 2
Master Label 524-659 Page 131 of 165 Revised June 2021
AVOID CONTACT OF THIS HERBICIDE WITH FOLIAGE, [ Optional text: GREEN] STEMS, EXPOSED
NON-WOODY ROOTS OR FRUIT OF CROPS, DESIRABLE PLANTS AND TREES, [ Optional text, if
applicable: EXCEPT AS DIRECTED FOR USE ON ROUNDUP READY AND OTHER LISTED
GLYPHOSATE TOLERANT CROPS], AS SEVERE PLANT INJURY OR DESTRUCTION COULD
RESULT.
Do not allow the herbicide solution to mist, drip, drift or splash onto desirable vegetation, as small quantities
of this product can cause severe damage or destruction to the crop, plants or other vegetation on which
application was not intended.
AVOID DRIFT. USE EXTREME CARE TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS
WHEN APPLYING THIS PRODUCT.
Avoiding spray drift at the application site is the responsibility of the applicator. The interaction of many
equipment- and weather-related factors determines the potential for spray drift. The applicator and grower
are responsible for considering all these factors when making decisions regarding the application of this
product.
The likelihood of injury occurring as the result of spray drift while applying this product increases when
winds are gusty, as wind velocity increases, when wind direction is constantly changing or when there are
other meteorological conditions that favor spray drift. When spraying, avoid combinations of pressure and
nozzle type that will result in splatter or generation of fine particles (mist) that are likely to drift.
TO PREVENT INJURY TO ADJACENT DESIRABL E VEGETATION, APPROPRIATE BUFFERS MUST
BE MAINTAINED.
AVOID APPLYING THIS PRODUCT AT EXCESSIVE SPEED OR SPRAYER PRESSURE.
8.2 Aerial Application Equipment
Unless otherwise prohibited, all broadcast applications of this product described on this label may be made
using aerial application equipment where appropriate, provided that the applicator complies with the
precautions and restrictions specified on this label and on separate supplemental labeling published for this
product.
DO NOT APPLY THIS PRODUCT USING AERIAL APPLICATION EQUIPM ENT EXCEPT UNDER
CONDITIONS SPECIFIED ON THIS LABEL OR ON SEPARATELY PUBLISHED SUPPLEMENTAL
LABELING FOR THIS PRODUCT.
[Optional voluntary label restriction: Aerial application of this product may be made using helicopters only.]
[Optional voluntary label restriction : Aerial application of this product may be made using helicopters only
in] [List states where aerial application is permitted by helicopter only, if applicable ].
FOR SPECIFIC USE INSTRUCTIONS, RESTRICTIONS AND REQUIREMENTS RELATED TO THE
AERIAL APPLICATION OF THIS PRODUCT IN CALIFORNIA OR SPECIFIC COUNTIES THEREIN,
REFER TO THE LIMITATIONS ON AERIAL APPLICATION IN THAT STATE OR COUNTY PRESENTED
IN THIS SECTION.
Apply this product at the rate specified on this label in 3 to 25 gallons of water per acre, unless otherwise
directed. Use a larger spray volume within this range where weeds, brush, trees and vines are dense or
form multiple canopy layers.
Avoid direct application to any body of water.
Drift control additives may be used.
Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking
devices.

APPENDIX 2
Master Label 524-659 Page 132 of 165 Revised June 2021
Aircraft Maintenance
Thoroughly wash aircraft, especially landing gear, after each day of spraying to remove residues of this
product accumulated during spraying or from spills. PROLONGED EXPOSURE OF THIS PRODUCT TO
UNCOATED STEEL SURFACES COULD RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
PART. LANDING GEAR IS MOST SUSCEPTIBLE. Maintaining an organic coating (paint) that meets
aerospace specification MIL-C-38413 can help prevent corrosion.
AERIAL SPRAY DRIFT MANAGEMENT
The following drift management requirements must be followed to minimize off-target drift movement during
aerial application. [ Optional label text, if appropriate: These requirements do not apply to forestry
applications.]
1. The distance of the outermost nozzles on the boom must not exceed ¾ the length of the [ Optional text,
if application using fixed-wing aircraft allowed: wingspan or] rotor.
2. Nozzles must always point backward, parallel with the air stream and never be pointed downwards
more than 45 degrees. Where states have more stringent regulations, they must be followed.
Importance of Droplet Size
The most effective way to reduce drift potential is to apply large droplets. The best drift management
strategy is to apply the largest droplets that provide sufficient coverage and control. Applying larger droplets
reduces drift potential, but will not prevent drift if the application is made improperly or under unfavorable
environmental conditions, such as in windy, high temperature with low humidity, and/or inversion conditions
as described below.
Controlling Droplet Size
x Volume: Use high flow rate nozzles to apply the highest practical spray volume. Nozzles with the higher
rated flows produce larger droplets.
x Pressure: Operate sprayer at a pressure towards the lower end of the range listed for the nozzle.
Higher pressure reduces droplet size and does not improve canopy penetration. When higher flow rates
are needed, use higher flow rate nozzles instead of increasing pressure.
x Number of nozzles: Use the minimum number of nozzles that provides uniform coverage.
x Nozzle orientation: Orienting nozzles so that the spray is released backwards, parallel to the air
stream, will produce larger droplets than other orientations. Significant deflection from the horizontal
will reduce droplet size and increase drift potential.
x Nozzle type: Use a nozzle type that is designed for the intended application. With most nozzle types,
narrower spray angles produce larger droplets. Consider using low-drift nozzles. Solid stream nozzles
oriented straight back produce larger droplets than other nozzle types.
x Boom length: For some use patterns, reducing the effective boom length to less than ¾ of the [Optional
text, if application using fixed-wing aircraft allowed: wingspan or] rotor length can further reduce drift
without reducing swath width.
x Application height: Application must be made at a height of 10 feet or less above the top of the largest
plants, unless a greater height is required for aircraft safety. Making the application at the lowest height
that is safe reduces the exposure of the droplets to evaporation and wind.
Swath Adjustment
When an application is made in the presence of a crosswind, the swath will be displaced downwind.
Therefore, on the upwind and downwind edges of the field, the applicator must compensate for this

APPENDIX 2
Master Label 524-659 Page 133 of 165 Revised June 2021
displacement by adjusting the path of the aircraft upwind. Increase the swath adjustment distance with
increasing drift potential (higher wind, smaller droplets, etc.).
Wind
Drift potential is lowest at wind speeds of between 2 and 10 miles per hour. However, many factors,
including droplet size and equipment type determine drift potential at any given wind speed. Avoid
application when wind speeds are below 2 miles per hour due to variable wind direction and high inversion
potential. NOTE: Local terrain can influence wind patterns. Every applicator must be familiar with local wind
patterns and how they affect drift.
Temperature and Humidity
When making an application in low relative humidity, set application equipment to produce larger droplets
to compensate for evaporation. Droplet evaporation is most severe when conditions are both hot and dry.
Temperature Inversions
Do not apply this product during a temperature inversion as drift potential is high under these conditions.
Temperature inversions restrict vertical air mixing, which causes small droplets to remain suspended in a
concentrated cloud. This cloud can move in unpredictable directions due to the light variable winds common
during inversions. Temperature inversions are characterized by increasing temperatures with altitude and
are common on nights with limited cloud cover and light to no wind. They begin to form as the sun sets
and often continue into the morning. Their presence can be indicated by ground fog; however, if fog is not
present, inversions can also be identified by the movement of smoke from a ground source or an aircraft
smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind
conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good
vertical air mixing.
Sensitive Areas
Apply this product only when the potential for drift to adjacent sensitive areas (e.g., residential areas, bodies
of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., when
wind is blowing away from a sensitive area).
State Specific Limitations on Aerial Application [The following section is optional to be used only if
required by the States indicated.]
LIMITATIONS ON AERIAL APPLICATION IN CALIFORNIA ONLY
[Optional voluntary restriction: Aerial application of this product in California may be made by helicopter
only.]
DO NOT apply this product using aerial application equipment in residential areas.
AVOID DRIFT – DO NOT APPLY WHEN WINDS ARE GUSTY OR UNDER ANY OTHER CONDITION
THAT FAVORS DRIFT. DRIFT OF THIS PR ODUCT ONTO ANY VEGETATION TO WHICH
APPLICATION WAS NOT INTENDED CAN CAUSE DAMAGE. TO PREVENT INJURY TO ADJACENT
DESIRABLE VEGETATION, USE PROPER AERIAL APPLICATION EQUIPMENT FITTED WITH
APPROPRIATE NOZZLES AND MAINTAIN ADEQUATE BUFFERS.
Follow the directions below when making an aerial application near non-target crops, desirable annual
vegetation, or desirable perennial vegetation after bud break and before total leaf drop.
1. Do not apply this product within 100 feet of all desirable vegetation or non-target crops.
2. If winds are blowing up to 5 miles per hour TOWARD desirable vegetation or non-target crops, do
not apply this product within 500 feet of the desirable vegetation or crops.

APPENDIX 2
Master Label 524-659 Page 134 of 165 Revised June 2021
3. If winds are blowing between 5 and 10 miles per hour TOWARD desirable vegetation or non-target
crops. a buffer zone greater than 500 feet might be needed to protect the desirable vegetation or
crops.
4. Do not apply this product using aerial application equipment when winds are blowing in excess of
10 miles per hour
5. Do not apply this product using aerial application equipment when inversion conditions exist.
When tank-mixing this product with 2,4-D, only 2,4-D amine formulations may be applied in California
using aerial application equipment. Tank mixtures of this product with 2,4-D amine formulations may
be applied by air in California on fallow fields and in reduced tillage systems [Optional text, if applicable:,
and for alfalfa and pasture renovation applications] only.
This product, when tank-mixed with dicamba, may not be applied by air in California.
ADDITIONAL LIMITATIONS ON AERIAL APPLICATION
IN FRESNO COUNTY, CALIFORNIA ONLY
Always read and follow the label directions and precautionary statements for all products used in the
aerial application.
The following information applies only from February 15 through March 31 within the following
boundaries of Fresno County, California:
 North: Fresno County line
 South: Fresno County line
 East: State Highway 99
 West: Fresno County line
Observe the following directions to minimize off-site movement during aerial application of this product.
Minimization of off-site movement is the responsibility of the grower, Pest Control Advisor and aerial
applicator.
Written Directions
Written directions MUST be submitted by or on behalf of the applicator to the Fresno County Agricultural
Commissioner 24 hours prior to the application. These written directions MUST state the proximity of
surrounding crops and that conditions of each manufacturer’s product label and this label have been
satisfied.
Aerial Applicator Training and Equipment
Aerial application of this product is limited to pilots who have successfully completed a Fresno County
Agricultural Commissioner and California Department of Pesticide Regulation approved training
program for aerial application of herbicides. All aircraft must be inspected, critiqued in flight and certified
at a Fresno County Agricultural Commissioner approved fly-in. Test and calibrate spray equipment at
intervals sufficient to insure that proper rates of herbicides and adjuvants are being applied during
commercial use. Applicator must document such calibrations and testing. Demonstration of
performance at Fresno County Agricultural Commissioner approved fly-ins constitutes such
documentation, or other written records showing calculations and measurements of flight and spray
parameters acceptable to the Fresno County Agricultural Commissioner.
Applications at Night – Do not apply this product by air earlier than 30 minutes prior to sunrise and/or
later than 30 minutes after sunset without prior permission from the Fresno County Agricultural
Commissioner.

APPENDIX 2
Master Label 524-659 Page 135 of 165 Revised June 2021
For additional information on the proper aerial application of this product in Fresno County, call 1-866-
99BAYER (1-866-992-2937).

8.3 Ground Application Equipment
Apply this product at an appropriate rate specified on this label in 3 to 40 gallons [Alternative volume: 10 to
60 gallons] of water per acre when making a broadcast application using ground application equipment,
unless otherwise directed on this label or on separate supplemental labeling or Fact Sheets published for
this product. As the weed density increases, increase the spray volume towards the upper end of this range
to ensure complete coverage. Use nozzles that will avoid generating a fine mist. For best performance of
this product using ground application equipment, use flat-fan nozzles. Check spray pattern for uniform
distribution of spray droplets.
8.4 Handheld Sprayers
When using a handheld sprayer, apply spray solutions of this product uniformly and completely to the
foliage of target weeds using a coarse droplet spectrum and a spray-to-wet technique; do not spray to the
point of runoff. For the appropriate concentration of this product in the spray solution and timing of
application to control specific weeds, woody brush, trees and vines, refer to the “WEEDS CONTROLLED”
section of this label
For control of annual weeds, make application when weeds are small and prior to seedhead or bud
formation. For control of perennial weeds, woody brush, trees and vines, make application after flowering
and before fall color and leaf drop.
When making a low-volume directed spray application to annual and perennial weeds, woody brush, trees
and vines using a handheld sprayer, ensure that at least 50 to 75 percent of the foliage or the top one-half
of each unwanted plant is sprayed. If a straight stream nozzle is used, start the application at the top of the
targeted plant and spray from top to bottom in a lateral zig-zag motion. To ensure uniform and complete
coverage, spray both sides of large or tall woody brush, trees and vines, or when foliage is thick and dense,
or where there are multiple sprouts. For best performance of this product on woody brush, trees and vines,
apply to actively growing vegetation after full leaf expansion and flowering, prior to fall color and leaf drop.
The following table summarizes various methods of foliar application using a backpack sprayer with a spray-
to-wet or low-volume directed spray technique and high-volume sprayer application using handheld
application equipment for control or partial control of herbaceous weeds, woody brush, trees and vines
listed in the “WEEDS CONTROLLED” section of this label.
Method of Application Spray Solution
Concentration
Spray Volume
Handgun or Backpack Sprayer 1.3% by volume Spray-to-wet technique
Low-Volume Directed Spray (Backpack) 3.1 to 6.2% by volume 15 to 25 gallons/acre
Modified High-Volume Spray 1.3 to 2.8% by volume 40 to 60 gallons/acre
Low-volume directed spray application with a backpack sprayer works best when applying to weeds and
brush less than 10 feet tall. For taller weeds and brush, a high-volume handgun can be modified by
reducing the nozzle size and spray pressure to produce a modified high-volume directed spray application.
8.5 Selective App lication Equipment
Selective application equipment allows this product to be applied to weeds growing near a crop or other
desirable vegetation without killing the desirable vegetation. Selective application equipment must be

APPENDIX 2
Master Label 524-659 Page 136 of 165 Revised June 2021
capable of preventing all contact of the herbicide solution with the desirable vegetation and operated without
spray mist escape, leakage or dripping of the herbicide solution.
AVOID CONTACT OF THIS HERBICIDE WITH DESIRABLE VEGETATION. Contact of this product with
desirable vegetation could result in unwanted plant damage or destruction. To the extent consistent with
applicable law, such damage shall be the sole responsibility of the applicator.
This product may be diluted with water and applied using a recirculating sprayer, shielded sprayer, hooded
sprayer, wiper applicator or sponge bar to weeds listed on this label growing on any terrestrial non-food or
non-feed crop site listed on this label, where feasible. This product may also be used with sprayers
equipped with optical weed sensor technology. Other selective equipment that may be used to deliver or
apply this product are single and hollow stem injectors, tree injectors, wiper applicators for cut stem and cut
stump applications, and spray or squirt bottles for cut stem, cut stump and frill applications to control large
stem weeds, brush, trees and vines listed on this label.
Recirculating Sprayer
A recirculating sprayer directs the spray solution onto weeds growing above desirable vegetation, while
spray solution that is not intercepted by weeds is collected and returned to the spray tank for reapplication.
A recirculating sprayer may be used to apply spray solutions of this product to weeds listed on this label in
any terrestrial non-crop site described on this label.
Shielded and Hooded Sprayers
A shielded sprayer directs the herbicide solution onto targeted weeds while using an impervious material,
or shield, to protect desirable vegetation from coming into contact with the herbicide, keep shields properly
adjusted and use nozzles that provide uniform coverage within the application area.
A hooded sprayer is a type of shielded sprayer where the spray pattern is fully enclosed, including the top,
sides, front and back, thereby shielding desirable vegetation from the spray solution.
This product may be diluted with water and applied using a shielded or hooded sprayer to weeds listed on
this label growing on any terrestrial non-crop site described on this label, where feasible.
Properly adjust the hood to protect desirable vegetation. Ensure that the hood is capable of completely
enclosing the spray pattern.
A hooded sprayer must be configured and operated in a manner that minimizes bouncing and avoids raising
the hood up off the ground surface at any time. If the hood is raised, spray particles can escape and come
into contact with desirable vegetation, causing damage to or destruction of the desirable vegetation. Avoid
operating this equipment on rough or sloping terrain where the spray hood is likely to rise up off the ground
surface.
Use hoods designed to minimize excessive dripping or runoff down the inside of the hood, such as a single,
low pressure, low drift, flat-fan nozzle with an 80- to 95-degree spray angle positioned at the top center of
the hood, with a spray volume of 20 to 30 gallons per acre.
The following procedures will help reduce the potential for injury to desirable vegetation when using a
hooded sprayer:
x Operate the sprayer with the hood on the ground or skimming across the ground surface.
x Leave at least an 8-inch untreated strip over the drill row. (For example, if a crop row width is 38 inches,
use a sprayer hood with a maximum width of 30 inches.)
x Operate at a ground speed no greater than 5 miles per hour to minimize bouncing of the hooded
sprayer.
x Apply when wind speed is 10 miles per hour of less.

APPENDIX 2
Master Label 524-659 Page 137 of 165 Revised June 2021
x Use low-drift nozzles that provide uniform coverage within the application area.
Injury to a crop or other desirable vegetation can occur when application is made to foliage of weeds that
come into direct contact with the desirable vegetation. Do not apply this product when leaves of desirable
vegetation are growing in direct contact with weeds. Droplets, mist, foam or splatter of the herbicide solution
settling onto desirable vegetation can result in discoloration, stunting or destruction.
Wiper Applicator
A wiper applicator is a device that physically wipes this product or solutions of this product directly onto the
unwanted vegetation or cut stump. Any handheld device that is capable of physically wiping this product or
solutions of this product directly onto the target weed or cut stump, such as a paint brush, may be used.
A mechanical wiper applicator, such as a rope wick or sponge bar that can be driven through a field over
the top of desirable vegetation to control tall weeds growing above the desirable vegetation, must be
designed, maintained, and operated to prevent the herbicide solution from coming into contact with
desirable vegetation.
Weeds that do not come into contact with the herbicide solution will not be affected. The more weed foliage
exposed above the desirable vegetation the better mechanical wiper applicators work. Better results can
be obtained when weeds are a minimum of 6 inches above the desired vegetation. Poor contact can also
occur when weeds are growing in dense clumps, when operating in areas of severe weed infestation or
when weed height varies dramatically. In these situations, more than one application of this product might
be necessary to achieve desired weed control.
For optimal results, operate wiper applicators at a ground speed of no greater than 5 miles per hour.
Performance in areas of heavy weed infestation can be improved by reducing speed, which will provide
more time for re-saturation of the wiper with the herbicide solution and more contact time of the wiper with
the weed. Better weed control using a wiper applicator can also be obtained when two applications are
made traveling in opposite directions across the field.
Keep wiping surfaces clean.
Be aware that on sloping ground the herbicide solution can migrate to one side, causing dripping at the
lower end and drying of the wiper surface at the upper end of the applicator.
Do not apply this product with a wiper applicator when weeds are wet.
Do not add surfactant to the herbicide solution when using a wiper applicator.
With Rope Wick or Sponge Bar Applicators, apply solutions ranging from 20 to 70 percent of this product
by volume in water.
With Panel Applicators, apply solutions of this product ranging from 20 to 100 percent (undiluted) of this
product by volume in water.
Mix only the amount of this product that will be used during a 1-day period, as reduced product performance
can result from the use of solutions held in storage.
Clean wiper parts promptly after using this product by thoroughly flushing with water.

Single and Hollow Stem Injectors
Control of certain weeds listed in the “WEEDS CONTROLLED” section can be obtained by injecting this
concentrated product or solutions of this product directly in or onto the target weed. Ensure that the
handheld injector being used for this application is capable of accurately delivering the volume specified on
the label. When making stem injections, the combined total use of this product must not exceed 6.75 quarts
per acre per year. At 5 milliliters of concentrated (undiluted) product per stem, 6.75 quarts will treat

APPENDIX 2
Master Label 524-659 Page 138 of 165 Revised June 2021
approximately 1300 stems per acre per year. The number of stems that can be treated per acre will vary
depending on the injection volume and the concentration of this product in the application solution.
8.6 Injection Systems
This product may be used in aerial and ground injection spray systems as a liquid concentrate or diluted
prior to injecting into the spray stream. Do not mix this concentrated product with the undiluted concentrate
of other products when using injection systems, unless otherwise directed.
8.7 Controlled Drople t Applicator (CDA)
The amount of this product applied per acre using a controlled droplet application (CDA) must be no less
than the rate specified on this label for application using conventional broadcast application equipment.
A controlled droplet applicator produces a spray pattern that is not easily visible. Use extreme care to avoid
spray or drift from coming into contact with the foliage or any other green tissue of desirable vegetation, as
plant damage or destruction could result.
9.0 TERRESTRIAL USE SITES
This product may be used according to the directions for use described on this label to control annual and
perennial weeds, woody brush, trees and vines listed on this label on any terrestrial site described on this
label.
This product may be used to control weeds, woody brush, trees and vines on maintained landscapes, on
improved and unimproved land, on lawns and turf and around ornamentals on industrial, commercial and
residential sites, including [Select all uses that are applicable to the final printed labeling: airports, apartment
complexes, chaparrals, ditch banks, driveways, dry ditches, dry canals, farmsteads, fencerows, forestry
sites, golf courses, greenhouses, lumber yards, manufacturing sites, municipal sites, natural areas,
nurseries, office complexes, ornamental beds, parks, parking areas, pastures, petroleum tank farms,
pumping installations, railroads, rangeland, recreational areas, residential areas, roadsides, schools,
shadehouses, sod and turfgrass seed farms, sports complexes, storage areas, substations, utility rights-of-
way, utility sites, warehouse areas, wildlife food plots and wildlife management areas. ]
This product may be used for non-selective control of unwanted vegetation on any site listed on this label
for trim-and-edge application around objects, including around building foundations, equipment storage
areas and trees, along and in fences, and to eliminate unwanted vegetation growing in and around
established shrub beds and ornamental plantings. This product may also be used for complete elimination
of vegetation from a terrestrial site prior to planting ornamentals, flowers, or turfgrass (sod or seed), and
prior to land development, including prior to beginning construction projects or the laying of asphalt or other
road material. Application of this product may be repeated, as needed, to maintain bare ground, up to a
total application of 6.75 quarts per acre per year.
This product may be used for establishment and maintenance of fuel breaks, for establishing fire perimeters
and black lines, along fire roads and to facilitate prescribed burning practices on any site described on this
label.
[Optional label text: This product may also be used for weed control or growth regulation on] [ Optional list
of any terrestrial uses that are included on this Master Label, including, but not limited to: Christmas tree
farms, farmsteads, production nurseries, sod farms and turfgrass seed farms.
Unless otherwise directed, application of this product may be made according to the directions for use in
the sections that follow to any of these sites using any method of application described on this label to
control any weeds, woody brush, trees and vines listed in the “WEEDS CONTROLLED” section of this
label.

APPENDIX 2
Master Label 524-659 Page 139 of 165 Revised June 2021
10.0 ADDITIONAL SITE MANAGEMENT INFORMATION
The following sections contain additional use information specifically related to certain use sites. Unless
otherwise directed, any application of this product described in the “WEEDS CONTROLLED” section or
any other section of this label may be made on the use sites described in the sections that follow, where
applicable, using any method of application described on this label that is appropriate.
10.1 Commercial, Residential and Recreational Area Management
All applications of this product described on this label may be used in commercial, residential and
recreational areas, including parks, schools and athletic fields, using any method of application described
on this label, including spot application to unwanted vegetation, trim-and-edge application around trees,
fences, walking paths, buildings, sidewalks, nature trails and other objects in these areas, to eliminate
unwanted weeds growing in established shrub and ornamental beds, for turf management and renovation,
and to eliminate vegetation from a site prior to development, including prior to planting an area to
ornamentals, flowers or turfgrass (sod or seed), or beginning construction projects.
10.2 Forestry, Hardwood and Christmas Tree Management
This product may be used for control or partial control of woody brush, trees, and herbaceous weeds on
any tree site, including forestry settings, Christmas tree plantations, and silvicultural and production nursery
sties, using any method of application listed on this label. See the “WEEDS CONTROLLED” section of this
label for application rates and specific use directions.
Weed Management, Site Preparation
This product may be used to control or partially control undesirable woody brush, trees, vines and
herbaceous weeds listed on this label for preparing sites prior to planting any tree species, including
Christmas trees, eucalyptus trees and hybrid tree cultivars, and for controlling weeds around established
trees, [ Optional text: for the release of conifer and hardwood trees,] establishing wildlife openings and
maintaining roads on any tree site.
TANK MIXTURES: This product may be applied in a tank-mix with products containing one or more of the
active ingredients listed below [ Optional text: , or one or more of the products listed,] to increase the
spectrum of vegetation controlled. Any application rate of this product listed on this label may be used in a
tank-mix with the following products for tree site management, including site preparation, provided that the
product is labeled for the use on the site of application and prior to planting the desired species. Refer to
the label of all products used in the tank mixture for approved uses and application rates. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix. Users must
follow the most restrictive directions for use and precautionary statements of each product in the tank
mixture. [Optional text, only required if the product information is not included in the list below: For more
information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of this
label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
imazapyr; metsulfuron methyl; sulfometuron methyl; triclopyr
Arsenal; Arsenal Herbicide Applicators Concentrate; Chopper; Chopper Gen2; Escort XP; Forestry
Garlon 4 Specialty; Forestry Garlon XRT Specialty; Garlon 3A Specialty; Garlon 4 Specialty; Garlon
4 Ultra Specialty; Landmark XP; Oust Extra; Oust XP]
For control or partial control of dense stands of vegetation or of hard-to-control woody brush, trees and
vines, apply these products at a rate or spray solution concentration towards the higher end of the given
range.

APPENDIX 2
Master Label 524-659 Page 140 of 165 Revised June 2021
Conifer Release, Mid-Rotation Conifer Release, Hardwood Release, Timber Stand Improvement
This product may be applied as a directed spray using a handheld sprayer or using any selective application
equipment described on this label to control woody and herbaceous weeds and other undesirable
understory vegetation below the tree crop canopy in conifer plantations, hardwood sites, Christmas tree
plantations and silvicultural and ornamental nurseries to facilitate the release and growth of conifer and
hardwood trees.
This product may also be applied using ground broadcast equipment or as a directed spray application for
mid-rotation release under the canopy of pines, other conifers and hardwoods.
PRECAUTIONS: Avoid contact of spray drift, mist or drips with foliage, green bark or non-woody surface
roots of desirable plant species. Use application techniques that prevent or minimize contact of this product
with foliage of desired trees or other plants through direct contact or off-target spray movement.
[Optional label text: RESTRICTIONS: Do not apply this product as an over-the-top broadcast application
for conifer or hardwood release, unless otherwise directed on this label or on separate supplemental
labeling for this product.]
Conifer Release – Broadcast Application [This section is optional in the final printed label]
This product may be broadly applied over the top of conifer tree species listed in this section after formation
of final conifer resting buds in the fall or prior to initial bud swelling in the spring for control, partial control
or suppression of herbaceous weeds and hardwoods listed in the “WEEDS CONTROLLED” section of this
label to facilitate the release of these desirable tree species in a forestry, plantation or nursery setting.
Unless otherwise directed, make this application only where conifers have been established for a minimum
of one growing season.
PRECAUTIONS: Conifer injury can occur if this product is applied over the top of conifers at rates higher
than prescribed on this label, where spray applications overlap, if application is made when conifers are
actively growing, or when they are growing under stress from drought, flood, improper planting or insect,
animal or disease damage.
Conifer Release Outside the Southeastern United States
For release of the following conifer species growing for a minimum of one growing season in most areas
outside the southeastern United States, apply 20 to 40 fluid ounces of this product per acre as a broadcast
application over the top of the conifer trees.
x Dou
glas fir x Hemlock x California redwood
x Fir species x Pines* x Spruce
* Includes all species except loblolly pine, longleaf pine, shortleaf pine or slash pine.
Apply 20 to 34 fluid ounces of this product for release of Douglas fir, pine and spruce that have been
established for only one growing season (except in California).
For release of spruce ( Picea spp.) in Maine, Michigan, Minnesota, New Hampshire and Wisconsin, up to
60 fluid ounces of this product may be applied after formation of final resting buds in the fall for control of
woody brush and tree species.
PRECAUTIONS: Ensure that the conifers are well hardened off before application of this product. [Optional
text, if adding surfactant to spray solutions of this product is allowed: The addition of nonionic surfactants
to spray solutions of this product when making over-the-top conifer release applications could cause conifer
injury.]

APPENDIX 2
Master Label 524-659 Page 141 of 165 Revised June 2021
Conifer Release in the Southeastern United States
For release of the following conifer species established for more than one growing season in the
southeastern United States, apply 30 to 51 fluid ounces of this product per acre in the fall as a broadcast
application over the top of the trees. For release of these species after only one growing season, apply
only 20 fluid ounces of this product per acre.
x Eastern white pine x Lon
gleaf pine x Slash pine
x Loblolly pine x Shortleaf pine x Virginia pine
TANK MIXTURES: This product may be applied for conifer release in a tank-mix with products containing
one or more of the active ingredients listed below [ Optional text:, or one or more of the products listed,] to
provide a broader spectrum of postemergence weed control and for residual control of weeds listed on the
label of those products. Only apply products that are labeled for application over the top of conifer species
when tank-mixing with this product. Refer to the individual product labels for approved uses and application
rates. It is the responsibility of the pesticide user to ensure that the intended use is included on the label of
all products added to a tank mixture. Read and follow label directions for all products added to the mix.
Users must follow the most restrictive directions for use and precautionary statements of each product in
the tank mixture. [Optional text, only required if the product information is not included in the list below: For
more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of
this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected from
the following list:
atrazine; imazapyr; metsulfuron methyl; sulfometuron methyl
Arsenal; Oust Extra; Oust XP]
For release of Douglas fir established for a minimum of one growing season prior to bud swell in early-
spring, apply 20 fluid ounces of this product per acre in a tank-mix with an appropriate rate of atrazine.
For herbaceous release of loblolly pine, Virginia pine and longleaf pine in the spring and early-summer,
apply 10 to 15 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Oust Extra
(EPA Reg. No. 432-1557; sulfometuron methyl, metsulfuron methyl) or Oust XP (EPA Reg. No. 432-1552;
sulfometuron methyl).
Late-Summer and Fall after Resting Bud Formation
For release of jack pine, white spruce and white pine, apply 20 to 40 fluid ounces of this product per acre
in a tank-mix with an appropriate rate of Oust Extra or Oust XP that will not harm these conifer species.
For release of Douglas fir, apply 20 to 30 fluid ounces of this product per acre in a tank-mix with an
appropriate rate of Arsenal (EPA Reg. No. 241-346; imazapyr).
For release of balsam fir and red spruce, apply 40 fluid ounces of this product per acre in a tank-mix with
an appropriate rate of Arsenal or Arsenal Herbicide Applicators Concentrate (EPA Reg. No. 241-299;
imazapyr).
10.3 Native and Wildlife Habitat Management
This product may be used to control exotic and other undesirable vegetation in wildlife habitat and natural
areas, including riparian and estuarine areas, rangeland and wildlife refuges. Application may be made to
allow recovery of native plant species or prior to planting desirable native species, and for similar broad-
spectrum vegetation control. Spot, cut stump, cut stem, stem injection, wiper and all other methods of
application listed on this label may be used to selectively remove unwanted plants for habitat management
and enhancement.

APPENDIX 2
Master Label 524-659 Page 142 of 165 Revised June 2021
This product may also be used to eliminate annual and perennial weeds prior to planting wildlife food plots.
Any wildlife food species may be planted after applying this product or native species may be allowed to
repopulate the area naturally. If tillage is needed to prepare a seedbed, wait a minimum of 7 days after
application before tillage to allow translocation of this herbicide into underground plant parts.
10.4 Ornamental and Production Nursery Management
All uses of this product described on this label may be used in a plant nursery setting using any method of
application described.
This product may be used to clear an area of unwanted vegetation prior to planting any ornamental plant,
tree, shrub or other plants.
This product may also be used to control weeds growing around established woody ornamental species,
including arborvitae, azalea, boxwood, crabapple, eucalyptus, euonymus, fir, Douglas fir, jojoba, hollies,
lilac, magnolia, maple, oak, poplar, privet, pine, spruce and yew, and to trim and edge around potted plants
and other objects in a plant nursery.
PRECAUTIONS: Protect desirable plants from the spray solution using shields or coverings made of
waterproof material. Take care to avoid contact of spray, drift or mist with foliage, green stems or immature
bark of established ornamental species.
Greenhouse/Shadehouse
This product may be used to control weeds growing in and around greenhouses and shadehouses.
RESTRICTIONS: Desirable vegetation must not be present during application in a greenhouse. Turn air
circulation fans off before applying this product inside a greenhouse or shadehouse and leave them off until
the application solution has dried.
10.5 Pasture Management
The use of this product in pastures includes use on bahiagrass, bermudagrass, bluegrass, brome, fescue,
guinea grass, kikuyu grass, orchardgrass, pangola grass, ryegrass, Timothy, and wheatgrass.
Preplant, Preemergence, Pasture Renovation
This product may be applied prior to planting or emergence of forage or perennial grasses. Refer to the
“WEEDS CONTROLLED” section of this label for application rates of this product for control of specific
weeds.
RESTRICTIONS: If the total application rate of this product is 60 fluid ounces per acre or less, no waiting
period between application and feeding or livestock grazing is required. If the rate is greater than 60 fluid
ounces per acre, remove domestic livestock before application and wait a minimum of 8 weeks after
application before grazing or harvesting.
Spot Application, Wiper Application
This product may be applied in pastures as a spot application or over the top of desirable grasses using a
wiper applicator to control taller growing weeds. For better weed control, remove domestic livestock before
application to allow for sufficient plant growth and wait a minimum of 7 days after application before grazing
livestock or harvesting for feed. See additional instructions on the use of wiper applicators in the
“APPLICATION EQUIPMENT AND TECHNIQUES” section of this label.
RESTRICTIONS: For spot application or use with a wiper applicator at rates of 60 fluid ounces per acre or
less, this product may be applied over the entire pasture or any portion of it. At rates greater than 60 fluid
ounces per acre, this product may be applied over no more than 10 percent of the total pasture at any one
time. Application may be repeated in the same area at 30-day intervals.

APPENDIX 2
Master Label 524-659 Page 143 of 165 Revised June 2021
Weed Suppression in Dormant Pastures
This product may be applied in dormant pastures to suppress competitive growth and seed production of
annual weeds and other undesirable vegetation. Apply 8 to 10 fluid ounces of this product per acre using
broadcast application equipment on pastures in late-fall after desirable perennial grasses have reached
dormancy or in late-winter before desirable perennial grasses break dormancy and initiate green growth.
PRECAUTIONS: Higher application rates may be used for hard-to-control weeds; however, higher rates
can cause stand reduction. Some stunting of perennial grasses can occur if broadcast application is made
when they are not dormant.
RESTRICTIONS: No waiting period is required between application and grazing or harvesting for feed. Do
not apply more than 60 fluid ounces of this product per acre per year onto pasture grasses except for
renovation. If reseeding is needed due to severe stand reduction, no waiting period is required after
application of this product before seeding the pasture grasses listed at the beginning of this section; for all
other pasture grasses, wait a minimum of 30 days after application before seeding.
10.6 Railroad Management
All uses of this product described in the “WEEDS CONTROLLED” or any other section of this label may be
used on railroad sites using any method of application described.
Application of this product along railroad rights-of-way may be made in up to 80 gallons of spray solution
per acre.
Bare Ground, Ballast and Shoulders, Crossings, Spot Application
This product may be used to maintain bare ground on railroad ballast and shoulders and reduce the need
for mowing and mechanical brush removal along railroad rights-of-way. Application of this product may be
repeated as weeds continue to emerge in order to maintain bare ground, up to a maximum total application
rate of 6.75 quarts per acre per year.
TANK MIXTURES: This product may be applied in a tank mixture with products containing one or more of
the active ingredients listed below [ Optional text:, or one or more of the products listed,] to broaden the
spectrum of control of woody brush, trees, and vines for bare ground, ballast and shoulder, crossing and
spot applications, and other brush, tree and vine control on railroad sites, provided that the product used is
labeled for the application being made. Refer to the label of all products used in the tank mixture for
approved uses and application rates. It is the responsibility of the pesticide user to ensure that the intended
use is included on the label of all products added to the mix. Read and follow label directions for all products
added to the mix. Users must follow the most restrictive directions for use and precautionary statements of
any product in the tank mixture. [ Optional text, only required if the product information is not included in
the list below: For more information on the products listed below, see the “TANK-MIX PRODUCT
INFORMATION” section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; atrazine; bromacil; chlorsulfuron; clopyralid; dicamba; diquat; diuron; hexazinone; imazapyr;
metsulfuron methyl; pelargonic acid; sulfometuron methyl; sulfosulfuron; tebuthiuron; triclopyr
Arsenal; Arsenal Herbicide Applicators Concentrate; Chopper; Chopper Gen2; Escort XP; Forestry
Garlon 4 Specialty; Forestry Garlon XRT Specialty; Garlon 3A Specialty; Garlon 4 Specialty; Garlon
4 Ultra Specialty; Habitat; Hyvar X; Hyvar X-L; Krovar DF; Oust Extra; Oust XP; Outrider
®; Princep
4L; Princep Caliber 90; Princep Liquid; Sahara DG; Scythe; Stalker; Spike 20P Specialty; Spike
80DF Specialty; Telar XP; Transline Specialty; Velpar DF CU; Velpar DF VU; Velpar L; Velpar L
CU; Velpar L VU; Vastlan Specialty]

APPENDIX 2
Master Label 524-659 Page 144 of 165 Revised June 2021
Brush, Tree and Vine Control
This product may be used to control woody brush, trees and vines along railroad rights-of-way. Apply 2.5
to 6.75 quarts of this product in up to 80 gallons of spray solution per acre as a broadcast application using
either a boom or boomless sprayer. Apply a 0.6- to 1.3-percent solution of this product when using high-
volume application equipment with a spray-to-wet technique, or a 3.1- to 6.2-percent solution when using
low-volume directed sprays for spot application.
TANK MIXTURES: This product may be applied in a tank-mix with products containing one or more of the
active ingredients listed below, [ Optional text:, or one or more of the products to broaden the spectrum of
control of woody brush, trees and vines along railroad rights-of-way, provided that the product is labeled
for use on these sites. Refer to the label of all products used in the tank mixture for approved uses and
application rates. It is the responsibility of the pesticide user to ensure that the intended use is included on
the label of all products added to a tank mixture. Read and follow label directions for each product added
to the mix. Users must follow the most restrictive directions for use and precautionary statements of each
product in the tank mixture. [Optional text, only required if the product information is not included in the list
below: For more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION”
section of this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
chlorsulfuron; clopyralid; dicamba; fosamine; hexazinone; imazapyr; metsulfuron methyl; picloram;
triclopyr
Arsenal Herbicide Applicator’s Concentrate; Chopper; Chopper Gen2; Escort XP; Forestry Garlon
4 Specialty; Forestry Garlon XRT Specialty; Garlon 3A Specialty; Garlon 4 Specialty; Garlon 4 Ultra
Specialty; Habitat; Krenite S Brush Control Agent; Stalker; Telar XP; Tordon 101 Mixture Specialty;
Tordon 22K Specialty; Tordon K Herbicide Specialty; Transline Specialty; Vanquish; Vastlan
Specialty; Velpar DF CU; Velpar DF VU; Velpar L; Velpar L CU; Velpar L VU]
Weed Control in Dormant and Actively Growing Bermudagrass
This product may be used to control or partially control many annual and perennial weeds in dormant and
actively growing bermudagrass along railroad rights-of-way. See the “WEEDS CONTROLLED” section of
this label for directions for use of this product for weed control in grasses.
10.7 Rangeland Management
This product will control or suppress many annual weeds growing in perennial cool- and warm-season grass
rangeland. Slight discoloration of the desirable grasses could occur, but will re-green and resume growing
under moist soil conditions as effects of this product wear off.
Preventing seed production is critical to the control of invasive annual grassy weeds on rangeland. Yearly
application of this product to eliminate invasive annual weeds before they produce seed will help eliminate
viable weed seeds from the soil. Delay grazing of the area after application to allow desirable perennials
to grow, flower and re-seed the area.
Bromus Control: A broadcast application of 4 to 10 fluid ounces of this product per acre will control or
suppress downy brome ( Bromus tectorum ), Japanese brome ( Bromus japonicus ), soft chess ( Bromus
mollis), cheatgrass (Bromus secalinus ), cereal rye and jointed goatgrass on rangeland. For maximum
performance, apply this product when most brome plants are in early-flower and before the plants, including
seedheads, turn color. Allow for secondary weed flushes to occur after spring rains to further deplete the
seed reserve in the soil and encourage perennial grass conversion on weedy sites. Apply this product in
the fall in areas where spring moisture is normally limited and fall germination allows for good weed growth
and weed seed depletion.

APPENDIX 2
Master Label 524-659 Page 145 of 165 Revised June 2021
Medusahead Control: To control or suppress medusahead, apply 10 fluid ounces of this product per acre
at the 3-leaf stage. Delaying application beyond this stage will result in reduced or unacceptable control.
Controlled burning prior to application of this product will eliminate the thatch layer produced by slowly
decaying culms. Allow new weed growth to occur before applying this product after a burn. Repeat this
application annually to eliminate medusahead seeds in the soil and allow desirable perennial grasses to
repopulate the area.
RESTRICTIONS: Do not apply more than 60 fluid ounces of this product per acre per year on rangeland.
Do not use ammonium sulfate when applying this product on rangeland grasses. No waiting period between
application of this product and feeding or livestock grazing is required.
10.8 Roadside Management
All uses of this product described on this label may be used for weed management along roadways,
including weed control in dormant and active bermudagrass and bahiagrass, weed control along shoulders
and under and around guardrails, signposts and other objects along the road, using any method of
application described on this label.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed], for shoulder, guardrail, spot
application, and for maintaining bare ground applications, provided that the product used is labeled for use
on these sites. Refer to the label of all products used in the tank mixture for approved uses and application
rates. It is the responsibility of the pesticide user to ensure that the intended use is included on the label
of all products added to a tank mixture. Read and follow label directions for each product added to the mix.
Users must follow the most restrictive directions for use and precautionary statements of each product in
the tank mixture. [Optional text, only required if the product information is not included in the list below: For
more information on the products listed below, see the “TANK-MIX PRODUCT INFORMATION” section of
this label.]
[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; atrazine; bromacil; chlorsulfuron; clopyralid; dicamba; diuron; fosamine; hexazinone;
imazapic; imazapyr; metsulfuron methyl; oryzalin; oxadiazon; pendimethalin; picloram; prodiamine;
sulfometuron; sulfosulfuron; triclopyr
AAtrex 4L; AAtrex Nine-O; Banvel; Barricade 65WG; Chopper; Chopper Gen2; Crossbow; Direx
4L; Escort XP; Endurance; Formula 40; Gallery 75 Dry Flowable Specialty; Gallery SC; Garlon 4;
Garlon XRT; Hyvar X; Karmex DF; Krenite S Brush Control Agent; Krovar DF; Landmark; Landmark
XP; Oust Extra; Oust XP; Outrider
®; Pendulum 3.3 EC; Pendulum AquaCap; Plateau; Poast; Poast
Plus; Princep 4L; Ronstar 50 WSP; Ronstar Flo; Ronstar G; Sahara DG; Surflan AS Specialty;
Surflan Flex; Surflan XL 2G; Telar XP; Tordon K Herbicide Specialty; Vanquish; Vastlan Specialty;
Velpar DF CU; Velpar DF VU; Velpar L CU; Velpar L; Velpar L VU; Weedar 64]
10.9 Utility Management
This product may be used along electrical power, pipeline and telephone rights-of-way, and on all sites
associated with these utility rights-of-way, including substations, access roads and rail lines, and along
similar rights-of-way that run in conjunction with utilities, for spot application of unwanted vegetation, side-
trimming, trim-and-edge application around objects, weed control prior to planting a utility site to
ornamentals, flowers, or turfgrass (sod or seed), turf management, to eliminate unwanted weeds growing
in established shrub or ornamental beds, to prepare or establish wildlife openings and to eliminate
vegetation prior to or beginning construction projects. Application of this product may be repeated as
needed to maintain bare ground as weeds continue to emerge, up to a maximum application rate of 6.75
quarts per acre per year.

APPENDIX 2
Master Label 524-659 Page 146 of 165 Revised June 2021
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below [Optional text:, or one or more of the products listed], for use on utility sites, provided
that the product used is labeled for use on these sites. Refer to the labels of all products used in the tank
mixture for approved sites and application rates. It is the responsibility of the pesticide user to ensure that
the intended use is included on the label of all products added to the mix. Read and follow label directions
for each product added to the mix. Users must follow the most restrictive directions for use and
precautionary statements of each product in the tank mixture. [ Optional text, only required if the product
information is not included in the list below: For more information on the products listed below, see the
“TANK-MIX PRODUCT INFORMATION” section of this label.]

[Active ingredients and products added to the final printed label for tank-mixing may be selected
from the following list:
2,4-D; atrazine; bromacil; chlorsulfuron; clopyralid; dicamba; diuron; fosamine; hexazinone;
imazapic; imazapyr; metsulfuron methyl; oryzalin; pendimethalin; prodiamine; sulfometuron methyl;
sulfosulfuron; triclopyr
AAtrex 4L; AAtrex Nine-O; Arsenal Herbicide Applicators Concentrate; Endurance; Escort XP;
Forestry Garlon 4 Specialty; Forestry Garlon XRT Specialty; Garlon 3A Specialty; Garlon 4
Specialty; Garlon 4 Ultra Specialty; Hyvar X-L; Krenite S Brush Control Agent; Krovar DF; Oust
Extra; Oust XP; Outrider
®; Plateau; Sahara DG; Surflan AS Agricultural; Surflan AS Specialty;
Surflan Flex; Surflan XL 2G; Telar XP; Transline Specialty; Vanquish; Velpar DF CU; Velpar DF
VU; Velpar L; Velpar L CU; Velpar L VU; Vastlan Specialty; Weedar 64]
To broaden the spectrum of weed control when side trimming, apply this product in a tank-mix with a product
containing triclopyr.
Ensure that any product containing triclopyr is thoroughly mixed with water in the spray tank according to
label directions before adding this product to the spray mixture. Maintain continuous agitation when adding
this product in order to avoid tank-mix incompatibility problems.
11.0 CROP USES [This section is optional in the final label]
[Any crop use listed in the Directions for Use with Food Crops section of this Master Label may be included
on this sub-label for terrestrial use]
12.0 WEEDS CONTROLLED
Read the entire label before proceeding to use this product.
Always use a higher application rate or spray solution concentration of this product within a given range
when weed growth is heavy or dense, or when weeds are growing in an undisturbed (non-cultivated) area.
Poor weed control could be realized if application is made to weeds covered with dust. For weeds that have
been mowed, grazed or cut, allow re-growth to occur prior to application of this product.
Refer to the sections that follow for application rates and timing of application for the control of annual and
perennial weeds, woody brush, trees and vines.
12.1 Weed Control, Renovation and Chemical Mowing in Turf
The use of this product described in this section may be applied to turfgrass growing on any terrestrial site
listed on this label. Ensure that any tank-mix product applied with this product is labeled for the intended
use and on the site of application.
Weed Control in Dormant Bermudagrass and Bahiagrass

APPENDIX 2
Master Label 524-659 Page 147 of 165 Revised June 2021
This product may be used to control or suppress many winter annual weeds and tall fescue for effective
release of dormant bermudagrass and bahiagrass prior to spring green-up in areas where these turfgrasses
are desirable ground covers and some temporary injury or discoloration can be tolerated.
Apply 4 to 40 fluid ounces of this product in 10 to 40 gallons of water per acre when bermudagrass and
bahiagrass are dormant and prior to spring green-up.
Application of more than 10 fluid ounces of this product per acre on highly maintained bermudagrass and
bahiagrass turf, such as golf courses and lawns, could result in injury or delayed green-up in the spring.
For residual weed control in dormant bermudagrass and bahiagrass, this product may be tank-mixed with
Outrider (EPA Reg. No. 59639-223; sulfosulfuron), Oust Extra (EPA Reg. No. 432-1557; sulfometuron
methyl, metsulfuron methyl), or Oust XP (EPA Reg. No. 432-1552; sulfometuron methyl) herbicides. Apply
4 to 40 fluid ounces of this product in a tank-mix with an appropriate rate of Outrider, Oust Extra or Oust
XP herbicide in 10 to 40 gallons of water per acre. To avoid delays in green-up and minimize injury, apply
no more than 1 ounce of Oust Extra or Oust XP herbicide per acre on bermudagrass and no more than 0.5
ounce on bahiagrass, and avoid application when these grasses are in a semi-dormant condition.
DO NOT apply this product in a tank-mix with Outrider, Oust Extra or Oust XP herbicides on highly
maintained bermudagrass and bahiagrass turf, such as on golf courses and lawns.
Weed Control in Actively Growing Bermudagrass
This product may be used to control or partially control many annual and perennial weeds in actively
growing bermudagrass. Some bermudagrass injury could result from the application of this product, but
the bermudagrass will recover under moist conditions once the effects of the product wear off. Use only on
well-established bermudagrass where some temporary injury or discoloration can be tolerated.
Apply 10 to 30 fluid ounces of this product in 10 to 40 gallons of spray solution per acre. Use a lower
application rate within this range when controlling annual weeds less than 4 inches tall (or runner length)
and increase the rate towards the upper end of the range as weeds increase in size or as they approach
flower or seedhead formation. At these application rates, this product will provide partial control of the
following perennial weeds in actively growing bermudagrass:
x Bahia
grass x Fescue, tall x Trumpetcreeper
x Bluestem, silver x Johnsongrass x Vaseygrass
PRECAUTIONS: Applying more than 10 fluid ounces of this product per acre on highly maintained
bermudagrass, such as on golf courses and lawns, could cause unacceptable turf injury and discoloration.
For a broader weed control spectrum in actively growing bermudagrass, this product may be tank-mixed
with Outrider, Oust Extra, or Oust XP herbicides. Apply these tank-mixtures only on well-established
bermudagrass where some temporary injury or discoloration can be tolerated. Make no more than one
application of this product in these tank mixtures in the same season, otherwise the bermudagrass could
be severely injured.
Apply 4 to 20 fluid ounces of this product per acre in a tank-mix with Outrider herbicide for control or partial
control of johnsongrass and other weeds listed on the Outrider herbicide label. Apply both products at a
rate toward the upper end of the given ranges to control annual or perennial weeds greater than 6 inches
tall.
Apply 10 to 20 fluid ounces of this product per acre in a tank-mix with Oust Extra or Oust XP herbicide to
increase the spectrum of weed control to include weeds listed on those labels. Use a lower application rate
of each product within the given ranges to control annual weeds listed on the labels that are less than 4
inches tall (or runner length) and increase the rates toward the upper end of the ranges as annual weeds
increase in size and approach the flower or seedhead stage. This tank-mix will provide partial control of the
following perennial weeds in actively growing bermudagrass:

APPENDIX 2
Master Label 524-659 Page 148 of 165 Revised June 2021
x Bahia grass x Dallis grass x Fescue, tall x Trumpetcreeper
x Bluestem, silver x Dock, curly x Johnsongrass x Vaseygrass
x Broomsed ge x Do gfennel x Poor joe x Vervain, blue
PRECAUTIONS: Apply these tank mixtures only on well-established bermudagrass where some temporary
injury or discoloration can be tolerated.
RESTRICTIONS: DO NOT apply this product in a tank mixture with Outrider or Oust herbicides on highly
maintained bermudagrass, such as on golf courses and lawns.
Weed Control in Actively Growing Bahiagrass
For suppression of vegetative growth and seedhead inhibition of bahiagrass for approximately 45 days,
apply 4 fluid ounces of this product in 10 to 40 gallons of water per acre 1 to 2 weeks after full green-up or
after mowing to a uniform height of 3 to 4 inches prior to seedhead emergence.
For growth suppression of bahiagrass for up to 120 days, apply 2.5 fluid ounces of this product per acre,
followed by an application of 1.4 to 2.5 fluid ounces per acre about 45 days later. Make no more than two
growth suppression applications per year.
For broad spectrum weed control in actively growing bahiagrass, this product may be tank-mixed with
Outrider, Oust Extra or Oust XP herbicides.
Apply 1.4 to 3.3 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Outrider
herbicide per acre to control perennial weeds or annual weeds greater than 4 inches in height.
Apply 4 fluid ounces of this product per acre in a tank-mix with an appropriate rate of Oust Extra or Oust
XP herbicide 1 to 2 weeks following an initial spring mowing to increase the spectrum of weed control in
actively growing bahiagrass. Make this application only once per year.
PRECAUTIONS: Apply these tank mixtures only on well-established bahiagrass where some temporary
injury or discoloration can be tolerated.
Turf Renovation
This product controls most existing vegetation prior to renovating turfgrass areas or establishing turfgrass
grown for seed or sod. For maximum control of existing vegetation, delay planting or sodding until after
determining if any re-growth of underground plant parts will occur. Where repeat applications are
necessary, sufficient re-growth must be attained prior to re-application of this product. Summer or fall
application of this product is the optimal timing for control of warm-season grasses, such as bermudagrass.
For managed turfgrass, apply this product after omitting at least one regular mowing to allow sufficient
growth for good interception of the spray solution.
This product has no residual soil activity and will not affect plants, seed or sod planted back into the area
after application.
A handheld sprayer may be used for spot application onto unwanted vegetation growing in existing
turfgrass. Broadcast or spot application using a handheld sprayer may be used to control sod remnants or
other unwanted vegetation after sod is harvested.
PRECAUTIONS: Do not disturb soil or underground plant parts before application of this product and delay
tillage and renovation techniques, such as vertical mowing, coring or slicing, a minimum of 7 days after
application to allow translocation of the herbicide into underground plant parts.
RESTRICTIONS: If application rates total 60 fluid ounces of this product per acre or less, no waiting period
between application and feeding or livestock grazing is required. If the rate is greater than 60 fluid ounces
per acre, remove domestic livestock before application and wait 8 weeks after application before grazing
or harvesting.

APPENDIX 2
Master Label 524-659 Page 149 of 165 Revised June 2021
Chemical Mowing
This product may be used to suppress growth of perennial and annual grasses listed in this section to serve
as a substitute for mowing.
Perennial Grasses – apply 4 fluid ounces of this product per acre to suppress growth of Kentucky bluegrass,
or 5 fluid ounces to suppress tall fescue, fine fescue, orchardgrass, quackgrass or reed canarygrass in 10
to 40 gallons of spray solution per acre after grasses have greened up to at least 75 percent green color in
the spring, or 7 to 10 days after mowing when sufficient re-growth has occurred to provide a desirable
height for growth regulation. Use chemical mowing only in areas where some temporary injury or
discoloration of perennial grasses can be tolerated.
Annual Grasses – apply 2.5 to 4 fluid ounces of this product in 10 to 40 gallons of spray solution per acre
to suppress growth of some annual grasses, such as annual ryegrass, wild barley and wild oats when
actively growing in coarse turf on roadsides or other industrial areas and before seedheads are in the boot
stage of development. This application could injure the desired annual grasses.
PRECAUTIONS: Use this product for chemical mowing only in areas where some temporary injury or
discoloration of perennial and annual grasses can be tolerated.
12.2 Annual Weeds
Annual weeds are easiest to control with this product when they are small and actively growing. New leaf
development indicates active growth.
To control or partially control the annual weeds listed in this section when they are less than 6 inches in
height or runner length and actively growing, apply 20 fluid ounces of this product per acre. If they are over
6 inches in height or runner length or slowly growing under stressed conditions, increase the application
rate to 1 to 2.5 quarts per acre, depending on weed height and severity of the poor growing conditions.
For application using a handheld sprayer with a spray-to-wet technique, apply a 0.3-percent solution of this
product to annual weeds less than 6 inches in height or runner length prior to seedhead formation in grasses
or bud formation in broadleaf weeds. To control annual weeds over 6 inches tall, or for even smaller weeds
growing under stressed conditions, apply a 0.6- to 1.3-percent solution. Apply the maximum concentration
of this product within this range to hard-to-control weeds or to control weeds over 24 inches tall.
[Optional text: For control of annual weeds using a handheld controlled droplet applicator (CDA), apply a
14-percent solution of this product (18 fluid ounces of this product per gallon of spray solution) at a flow
rate of 2 fluid ounces of spray solution per minute and a walking speed of 1.5 miles per hour (1 quart of
spray solution per acre). When using a vehicle-mounted CDA, apply the appropriate amount of this product
in 2 to 15 gallons of water per acre.]
For maximum performance of this product, do not mow, cut, till, burn or disturb vegetation in the application
area for a minimum of 3 days after application.
This product has no residual soil activity and does not control emergence of new annual weeds from seed.
Repeated applications of this product will be needed to control weeds that continue to emerge.
ANNUAL WEED SPECIES
Anoda, spurred
Balsam apple1
Barley
Barley, little
Barnyardgrass
Bassia, fivehook
Bittercress

APPENDIX 2
Master Label 524-659 Page 150 of 165 Revised June 2021
Bluegrass, annual*
Bluegrass, bulbous
Brome, downy
Brome, Japanese
Broomsedge
Buttercup
Castor bean
2
Cheatgrass
Cheeseweed (Malva parviflora)
Chervil
Chickweed
Cocklebur
Copperleaf, hophornbeam
Copperleaf, Virginia
Coreopsis, plains/tickseed
Corn
Crabgrass
Cupgrass, woolly
Dwarf dandelion
Eclipta
False dandelion
Falseflax, smallseed
Fiddleneck
Filaree
Fleabane, annual
Fleabane, hairy* (Conyza bonariensis)
Fleabane, rough
Foxtail
Foxtail, Carolina
Geranium, Carolina
Goatgrass, jointed
Goosegrass*
Groundsel, common
Henbit
Horseweed / Marestail* (Conyza canadensis)
Itchgrass
Johnsongrass, seedling*
Junglerice*
Knotweed
Kochia*
Lambsquarters
Lettuce, prickly
Mannagrass, eastern
Mayweed
Medusahead
Morning glory (Ipomoea spp)
Mustard, blue
Mustard, tansy
Mustard, tumble
Mustard, wild
Nightshade, black

APPENDIX 2
Master Label 524-659 Page 151 of 165 Revised June 2021
Oats
Panicum, browntop
Panicum, fall
Panicum, Texas
Pennycress, field
Pepperweed, Virginia
Pigweed*
Puncturevine
Purslane, common
Pusley, Florida
Ragweed, common*
Ragweed, giant*
Rice, red
Rocket, London
Rocket, yellow
Rye
Ryegrass*
Sandbur, field
Sesbania, hemp
Shattercane
Shepherd’s-purse
Sicklepod
Signalgrass, broadleaf
Smartweed, ladysthumb
Smartweed, Pennsylvania
Sorghum, grain (milo)
Sowthistle, annual
Spanish needles
3
Speedwell, corn
Speedwell, purslane
Sprangletop
Spurge, annual
Spurge, prostrate
Spurge, spotted
Spurry, umbrella
Starthistle, yellow
Stinkgrass
Sunflower*
Teaweed / Prickly sida
Thistle, Russian*
Velvetleaf
Wheat
Wild oats
Witchgrass
1 For control of balsam apple, apply this product using handheld equipment only.
2 Control of castor bean can also be achieved by injecting 4 milliliters of this concentrated (undiluted)
product per plant into the lower portion of the main stem.
3 For control of Spanish needles, apply 40 fluid ounces of this product per acre.

APPENDIX 2
Master Label 524-659 Page 152 of 165 Revised June 2021
* A glyphosate-resistant biotype has been confirmed. For additional information, refer to the “WEED
RESISTANCE MANAGEMENT” section of this label. You can also visit www.weedscience.org or contact
your Bayer CropScience representative.
12.3 Perennial Weeds
More effective control of perennial weeds can be obtained when this product is applied to target weeds that
are small and actively growing. New leaf development indicates active growth. If application must be made
to larger weeds or to weeds that are slowly growing under stressful conditions, apply this product at a rate
or spray solution concentration towards the upper end of the specified range.
If weeds have been mowed or tilled, do not apply this product until plants have resumed active growth and
have reached the specified stage of growth or sufficient growth has been achieved to allow for good
interception of the spray solution. To maximize performance of this product, do not mow, cut, till, burn or
disturb vegetation in the application area for a minimum of 7 days after application.
For control of perennial weeds listed on this label using backpack or handheld equipment and a low-volume
application technique, apply a 3.1- to 6.2-percent solution of this product over the crown of the target plant
to cover 50 percent of the upper plant foliage.
For control of perennial weeds using a handheld controlled droplet applicator (CDA), apply a 14- to 28-
percent solution of this product (18 to 36 fluid ounces of this product per gallon of spray solution) at a flow
rate of 2 fluid ounces of spray solution per minute and a walking speed of 0.75 mile per hour (2 to 4 quarts
of spray solution per acre). When using a vehicle-mounted CDA, apply the required amount of this product,
as indicated in the following table, in 2 to 15 gallons of water per acre.
Application of this product in the fall must be made before a killing frost.
This product has no soil activity and does not control emergence of perennial weeds from seed and dormant
underground roots, rhizomes or tubers present in the soil at the time of application. Repeated application
of this product will be necessary for continued control of weeds that emerge after application.
PERENNIAL WEEDS RATE TABLE
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
Alfalfa1* 1 – 1.25 1.3
Alligatorweed1* 2.5 0.9
Apply this product when most of the target plants are in bloom. More than one application will be needed
to achieve control.
Anise (fennel) 1.25 – 2.5 0.9 – 1.3
Artichoke, Jerusalem 1.9 – 3.125 1.3
Bahiagrass 1.9 – 3.1 1.3
Beachgrass, European (Ammophila arenaria) – 3.1
Apply a 3.1-percent solution of this product using a spray-to-wet technique or an 7.5-percent solution
using a low-volume application technique. More effective control can be obtained when application is
made onto target weeds that are actively growing at the boot through the full- heading stage of
development. Make application prior to the loss of more than 50 percent of green leaf color in the fall.
Monitor application site and re-apply this product to any target weeds that were missed, if necessary,
before re-seeding the area with desirable vegetation.

APPENDIX 2
Master Label 524-659 Page 153 of 165 Revised June 2021
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
For selective control of European beachgrass, apply a 30 -percent solution of this product during period
of active growth using a wiper applicator. Maximizing the amount of individual leaf tissue contacted by
the wiper applicator or making a second pass through the field in the opposite direction will improve
control. Avoid contact of the herbicide solution with desirable vegetation.
Bentgrass1* 1 1.3
This product alone will provide only partial control of bentgrass ( Agrostis spp.). For better control, apply
1.5 to 2.1quarts of this product in a tank-mix with an appropriate rate of clethodim, fluazifop-P-butyl,
fenoxaprop-P-butyl, or sethoxydim in a spray volume of 20 to 40 gallons per acre using broadcast
application equipment. When using a handheld sprayer, apply this product at a concentration of 1.4 fluid
ounces per gallon in a tank-mix with an appropriate concentration of one or more of these active
ingredients. More than one application might be needed for complete control.
Bermudagrass 3.125 1.3
Make application when seedheads are present.
Bermudagrass, water (knotgrass) 1 1.3
Bindweed, field 2.5 – 3.125 1.3
For control, apply 2.5 to 3.125 quarts of this product per acre as a broadcast application west of the
Mississippi River and 1.9 to 2.5 quarts per acre east of the Mississippi River when bindweed is at or
beyond full bloom. For maximum performance, apply this product in late summer or fall.
Bittersweet, Oriental 1.9 1.3
For control, apply this product as a broadcast application in 30 to 40 gallons of spray solution per acre.
To maximize performance, apply this product in late-summer or fall while leaves are still green and after
fruit formation. When using handheld application equipment and a spray-to-wet technique , ensure
complete coverage of the target plant with the spray solution.
Bluegrass, Kentucky 1.25 1.3
Apply when most target plants have reached the boot to head stage of development. When application
is made prior to the boot stage, reduced control can result. In the fall, make application before plants
have turned brown.
Blueweed, Texas 2.5– 3.125 1.3
Apply 2.5 to 3.125 quarts of this product per acre west of the Mississippi River and 2.2 to 2.5 quarts per
acre east of the Mississippi River when most target plants are at or beyond full bloom. For best results
apply this product results apply in late-summer or fall.
Brackenfern 1.9 – 2.5 0.9
Apply to fully expanded fronds that are at least 18 inches long
Bromegrass, smooth 1.25 1.3
Apply this product when most target plants have reached the boot to head stage of development. When
application is made prior to the boot stage, reduced control can result. In the fall, make application before
plants have turned brown.
Bursage, woolly-leaf – 1.3
Canarygrass, reed 1.25 – 1.9 1.3
Apply this product when most target plants have reached the boot to head stage of development. When
application is made prior to the boot stage, reduced control can result. In the fall, make application before
plants have turned brown.

APPENDIX 2
Master Label 524-659 Page 154 of 165 Revised June 2021
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
Cattail 1.9 – 3.125 1.3
Apply this product when target plants are actively growing and are at or beyond the early to full bloom
stage of development. For maximum performance, apply this product during the summer or fall months.
Clover; red, white 1.9 – 3.125 1.3
Cogongrass 1.9 – 3.125 1.3
Apply this product in late-summer or fall when cogongrass is at least 18 inches tall and actively growing.
Due to uneven stages of growth and the dense nature of cogongrass vegetation, more than one
application might be necessary to achieve control.
Dallisgrass 1.9 – 3.125 1.3
Dandelion 1.9 – 3.125 1.3
Dock, curly 1.9 – 3.125 1.3
Dogbane, hemp 2.5 1.3
Apply this product when most target plants have reached the late-bud to flower stage of growth. For
maximum performance, make application in late summer or fall.
Fescue (except tall) 2.5 1.3
Fescue, tall 1.9 1.3
Apply this product when most target plants have reached the boot to head stage of growth. If applied
prior to the boot stage, less than desirable control might be obtained.
Guinea grass 1.9 0.9
Apply this product when most target plants have reached at least the 7-leaf growth stage.
Hemlock, poison 1.25 – 2.5 0.9 – 1.3
Control can also be achieved by injecting 5 milliliters of a 5-percent solution of this product using a
handheld injection device in one leaf cane per plant, 12 inches above the root crown. 2
Hogweed, giant – –
Control can be achieved by injecting 5 milliliters of a 5-percent solution of this product using a handheld
injection device in one leaf cane per plant, 12 inches above the root crown.2
Horsenettle 1.9 – 3.125 1.3
Horseradish 2.5 1.3
Apply this product when most target plants have reached the late-bud to flower stage of development.
For maximum performance, apply this product in late summer or fall.
Horsetail, field – –
Control can be achieved by injecting 0.5 milliliter of this product per stem directly into the plant stem one
segment above the root crown using a handheld injection device.2
Iceplant 1.25 1.3 – 1.9
Ivy; cape, German 1.25 – 2.5 0.9 – 1.3
Johnsongrass 1.25 – 1.9 0.9
Apply this product when most target plants have reached the boot to head stage of development or
before plants have turned brown in the fall. When applied prior to the boot stage, reduced control can
result.

APPENDIX 2
Master Label 524-659 Page 155 of 165 Revised June 2021
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
Kikuyu grass 1.25 – 1.9 1.3
Knapweed 2.5 1.3
Apply this product when most target plants have reached the late-bud to flower stage of growth. For
maximum performance, make application in late summer or fall.
Knotweed; Bohemian, giant, Japanese 2.5 1.9
Apply 2.5 quarts of this product per acre as a broadcast application in 3 to 40 gallons of spray solution.
For application using a backpack sprayer and a spray-to-wet technique, apply a 1.9-percent solution of
this product. For maximum performance, do not disturb vegetation in the application area for a minimum
of 7 days after application.
Control can also be achieved by cutting stems cleanly just below the 2nd or 3rd node above the ground
and immediately apply 0.36 fluid ounce (10 milliliters) of a 50-percent solution of this product in water
into the ”well” or remaining internode. Ensure that the upper plant material that was removed is gathered
and properly discarded to prevent new plants from propagating from sprouting buds. Use of a bio-barrier,
such as cardboard, plywood or plastic sheeting, will help guard against the spread of plant material. The
combined total application rate of this product must not exceed 5.6 quarts per acre.
2
Control can also be achieved by injecting 5 milliliters of this concentrated (undiluted) product per stem
into the second or third internode using a handheld injection device.2
Lantana – 0.9
Apply this product when most target plants are at or beyond the bloom stage of growth. Use the higher
spray solution concentration on plants that have reached the woody stage of growth.
Lespedeza 1.9 – 3.125 1.3
Loosestrife, purple 1.65 0.9 – 1.3
Apply this product when most target plants are at or beyond the bloom stage of growth. Maximum
performance can be achieved when this product is applied during summer or fall months. Fall application
must be made before a killing frost.
Lotus, American 1.65 0.7
Apply this product when most target plants are at or beyond the bloom stage of growth. Maximum
performance can be achieved when application is made during summer or fall months. Fall application
must be made before a killing frost. More than one application of this product might be necessary to
control re-growth of underground plant parts and seeds.
Milkweed, common 1.9 1.3
Apply this product when most target plants have reached the late-bud to flower stage of growth.
Muhly, wirestem 1.25 1.3
Make application when most target plants are at least 8 inches in height (3- to 4-leaf stage of
development) and actively growing.
Mullein, common 1.9 – 3.125 1.3
Napiergrass 1.9 – 3.125 1.3
Nightshade, silverleaf 1.25 1.3
Apply 2.5 to 3.125 quarts of this product per acre as a broadcast application west of the Mississippi River
and 1.9 to 2.5 quarts per acre east of the Mississippi River when most target plants are at or beyond full
bloom. Maximum performance can be obtained when application is made in late-summer or fall after
berries have formed.

APPENDIX 2
Master Label 524-659 Page 156 of 165 Revised June 2021
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
Nutsedge; purple, yellow 1.9 0.9 – 1.3
Apply this product to control existing nutsedge plants and attached immature nutlets when target plants
are in flower or when new nutlets can be found at rhizome tips. Nutlets that have not germinated will not
be controlled and will require repeated application of this product for long-term control.
Orchardgrass 1.25 1.3
Make application when most target plants have reached the boot to head stage of development. When
applied prior to the boot stage, less than acceptable control could be obtained. In the fall, make
application before plants have turned brown.
Pampas grass 1.9 – 3.125 0.9 – 1.3
Para grass 1.9 – 3.125 1.3
More than one application of this product will be needed to achieve complete control. Allow plants to re-
grow to the 7- to 10-leaf stage before making next application.
Pepperweed, perennial 2.5 1.3
Phragmites1* 1.9 – 3.125 0.9 – 1.3
For partial control of phragmites in Florida and the counties of other states bordering the Gulf of Mexico,
apply 3.125 quarts of this product per acre as a broadcast application or a 1.3-percent solution using a
handheld sprayer. In other areas of the U.S., apply 1.65 to 2.5 quarts per acre as a broadcast application
or, for partial control, apply a 0.7-percent solution using a handheld sprayer. For enhanced results, make
application in late-summer or fall when plants are actively growing and in full bloom. Due to the dense
nature of this vegetation (which can prevent good spray coverage) and uneven stages of growth, more
than one application of this product might be necessary to achieve control. Visual symptoms of control
will be slow to develop.
Pokeweed, common 1 1.3
Apply to actively growing target plants up to 24 inches tall.
Quackgrass 1.25 – 1.9 1.3
Apply this product when most target plants are at least 8 inches in height (3- to 4-leaf stage of
development) and actively growing.
Redvine* 1.25 1.3
Reed; common, giant 2.5 – 3.125 1.3
For maximum performance, apply this product application is made in late-summer or fall.
Control can also be achieved by injecting 5 milliliters of this concentrated product (undiluted) directly into
the second or third internode using a handheld injection device.2
Ryegrass, perennial 1.25 – 1.9 0.9
Apply this product when most target plants have reached the boot to head stage of growth. When applied
prior to the boot stage, reduced control can result. In the fall, make application before ryegrass turns
brown.
Smartweed, swamp 1.9 – 3.125 1.3
Spatterdock 2.5 0.7
Make application when most target plants are in full bloom. For maximum performance, make application
in the summer or fall.
Sowthistle, perennial 1.25 – 1.9 1.3

APPENDIX 2
Master Label 524-659 Page 157 of 165 Revised June 2021
Perennial Weed Species
Broadcast
Rate
(quarts/acre)
Handheld
Sprayer
Concentration
(% Solution)
Spurge, leafy1* – 1.3
Starthistle, yellow 1.25 1.3
Sweet potato, wild1* – 1.3
Make application when most target plants are at or beyond the bloom stage of growth. More than one
application will be needed to achieve control.
Thistle, artichoke 1.25 – 1.9 0.9 – 1.3
Make application when target plants are at or beyond the bud stage of growth.
Thistle, Canada 1.25 – 1.9 1.3
Make application when target plants are at or beyond the bud stage of growth.
Control can also be achieved by stem-injection. Cut 8 to 9 of tallest plants in a clump at bud stage. Push
a cavity needle into the stem center and then slowly remove it as you inject 0.5 milliliter of this
concentrated (undiluted) product into the stem.
2
Timothy 1.25 – 1.9 1.3
Make application when most target plants have reached the boot to head stage of development. If
application is made prior to the boot stage, reduced control can result. In the fall, make application before
plants turn brown.
Torpedograss
1* 2.5 – 3.125 1.3
Trumpetcreeper1* 1.25 – 1.9 1.3
Tules, common – 1.3
Make application to target plants at or beyond the seedhead stage of development. Visual symptoms
will be slow to appear and might not appear for 3 or more weeks after application.
Vaseygrass 1.9 – 3.125 1.3
Velvetgrass 1.9 – 3.125 1.3
Wheatgrass, western 1.25 – 1.9 1.3
Make application when most target plants have reached the boot to head stage of development.
Application made prior to the boot stage could result in reduced control. In the fall, make application
before plants turn brown.
1* Partial control only
2 When using stem injection, the combined total use of this product must not exceed 6.75 quarts per acre
per year. At 5 milliliters of concentrated (undiluted) product per stem, 6.75 quarts of this product will
treat approximately 1300 stems per acre per year. The number of stems that can be treated per acre
will vary depending on the injection volume and the concentration of this product in the application
solution.
12.4 Woody Brush, Trees and Vines
Apply this product to brush, trees, and vines that are actively growing after full leaf expansion, unless
otherwise directed. Apply this product at a rate or spray solution concentration towards the upper end of
the given range to control of larger brush and trees and/or for application in areas of dense vegetative
growth, or for the control of vines that have reached the woody stage of growth.
In most areas, maximum performance of this product on woody brush, trees, and vines can be obtained
when application is made in late-summer or fall after fruit formation. In arid areas, application of this product

APPENDIX 2
Master Label 524-659 Page 158 of 165 Revised June 2021
in the spring to early summer when brush and trees are at high moisture content and flowering could provide
better results. Poor control can be expected when this product is applied to drought-stressed brush and
trees.
When applying this product using a spray-to-wet technique with a handheld sprayer to control harder-to-
control woody brush and trees, use a 1.3-percent solution of this product.
Some autumn color on undesirable deciduous species on brush and trees is acceptable when applying this
product in the fall, provided no major leaf drop has occurred. Reduced performance of this product could
result if application is made after a frost. Symptoms might not appear prior to frost or senescence following
a fall application.
Repeat applications of this product might be required to control plants regenerating from underground parts
or from seed.
For maximum performance, allow 7 or more days after application of this product before mowing, cutting,
tilling, burning or removal of woody brush, trees, or vines from that application site. Additional applications
of this product will be needed to control brush and trees regenerating from underground parts or seed.
TANK MIXTURES: This product may be applied at any rate stated on this label in a tank mixture with
products containing one or more of the active ingredients listed below [Optional text:, or one or more of the
products listed,] to increase the spectrum of control of herbaceous weeds, woody brush, trees and vines.
For control of herbaceous weeds, apply the tank-mix product at the lower end of the given application rate
or spray solution concentration range. For control of dense stands of vegetation or for hard-to-control
woody brush, trees and vines, increase the application rate or spray solution concentration of the tank-mix
product towards the higher end of the range. Refer to the label of all products used in the tank mixture for
approved uses and application rates. It is the responsibility of the pesticide user to ensure that the intended
use is included on the label of all products added to a tank mixture. Read and follow label directions for all
product added to the mix. Users must follow the most restrictive directions for use and precautionary
statements of each product in the tank mixture. [ Optional text, only required if the product information is
not included in the list below: For more information on the products listed below, see the “TANK-MIX
PRODUCT INFORMATION” section of this label.]
[Active ingredients and products included on the final printed label for tank-mixing may be selected
from the following list:
imazapyr; metsulfuron methyl; triclopyr
Arsenal Herbicide Applicators Concentrate; Escort XP; Forestry Garlon 4 Specialty; Forestry
Garlon XRT Specialty; Garlon 3A Specialty; Garlon 4 Specialty; Garlon 4 Ultra Specialty; Vastlan
Specialty]
Ensure that any product containing triclopyr is thoroughly mixed with water in the spray tank according to
label directions before adding this product to the spray mixture.
Cut Stump Application
This product may be used to control re-growth and re-sprouting of woody brush and trees on any site listed
on this label.
Cut the woody brush or tree close to the soil surface and immediately apply a 50- to 100-percent (undiluted)
solution of this product to the freshly-cut surface using an applicator capable of applying this product to the
entire cambium. A delay in application could result in reduced performance. For best results, cut the woody
brush or tree during period of active growth and full leaf expansion and apply this product.

APPENDIX 2
Master Label 524-659 Page 159 of 165 Revised June 2021
For control of the tree of heaven (Ailanthus altissima), cut the tree close to the soil surface and immediately
apply a 50-percent solution of this product (16 fluid ounces per quart of solution) and 10 percent Arsenal
herbicide (3 to 4 fluid ounces per quart of solution) in water to the freshly-cut surface.
DO NOT MAKE A CUT STUMP APPLICATION WHEN THE ROOTS OF DESIRABLE WOODY BRUSH
OR TREES MIGHT BE GRAFTED TO THE ROOTS OF THE CUT STUMP, AS INJURY TO THE
ADJACENT TREES COULD OCCUR. Some sprouts, stem s, or trees can share a common root system.
Adjacent trees having a similar age, height and spacing could be an indicator of a shared root system.
Whether grafted or shared, injury is likely to occur to adjacent stems or trees when this product is applied
to one or more trees sharing a common root system.
Woody Brush and Tree Injection and Frill Application
This product may be used to control woody brush and trees listed in this section by injection or frill
application on any site listed on this label.
Inject or apply the equivalent of 1 milliliter (0.04 fluid once) of this concentrated (undiluted) product for every
2 to 3 inches of trunk diameter at breast height (DBH). If injecting this product into the woody brush or tree,
use equipment capable of penetrating into the living plant tissue under the bark.
For frill application, apply a 50- to 100-percent (undiluted) solution of this product in water to either a
continuous frill around the tree or to cuts evenly spaced around the tree below all branches. As tree diameter
increases, better results can be achieved by applying this product to a continuous frill or to more closely
spaced cuttings. Avoid application techniques that allow runoff of this product to occur from frilled or cut
areas. In species that freely exude sap, make the frill or cuts at an oblique angle to produce a cupping
effect and apply this concentrated product undiluted. For maximum performance, make this application
during period of active growth and after full leaf expansion.
Modified High-Volume and Low-Volume Backpack Application
For control and partial control of woody bush, trees and vines listed on this label when using a backpack
sprayer or other handheld equipment and a directed low-volume foliar application technique, apply a 3.1-
to 6.2-percent solution of this product evenly over the plant crown to cover 50 percent of the upper foliage
of undesirable woody brush, trees and vines.
WOODY BRUSH, TREES AND VINES RATE TABLE
Species
Broadcast
Rate
(quarts/acre)
Handheld
Spray-to-Wet
Concentration
(% Solution)
Alder 1.9 – 2.5 0.9
Ash1* 1.25 – 3.125 0.9 – 1.3
Aspen, quaking 1.25 – 1.9 0.9
Bearclover (Bearmat) 1* 1.25 – 3.125 0.9 – 1.3
Beech1* 1.25 – 3.125 0.9 – 1.3
Birch 1.25 – 1.9 0.9
Blackberry 1.9 – 2.5 0.9
Blackgum 1.25 – 3.125 0.9 – 1.3
Bracken 1.25 – 3.125 0.9 – 1.3
Broom; French, Scotch 1.25 – 3.125 0.9 – 1.3

APPENDIX 2
Master Label 524-659 Page 160 of 165 Revised June 2021
Species
Broadcast
Rate
(quarts/acre)
Handheld
Spray-to-Wet
Concentration
(% Solution)
Buckwheat, California1* 1.25 – 2.5 0.9 – 1.3
Cascara1* 1.25 – 3.125 0.9 – 1.3
Castor bean – –
Also for control, inject 4 milliliters of this concentrated (undiluted) product per plant directly into the
lower portion of the main stem using a handheld injection device.2
Catsclaw1* – 0.9
For partial control, apply this product when at least 50 percent of the new leaves are fully developed.
Ceanothus1* 1.25 – 3.125 0.9 – 1.3
Chamise1* 1.25 – 3.125 0.9
Cherry; bitter, black, pin 1.25 – 1.9 0.9
Coyote brush 1.9 – 2.5 0.9 – 1.3
For control, apply this product when at least 50 percent of the new leaves are fully developed.
Deerweed 1.25 - 3.125 0.9
Dogwood1* 1.25 – 3.125 0.9 – 1.3
Elderberry 1.25 – 1.9 0.9
Elm1* 1.25 – 3.125 0.9 – 1.3
Eucalyptus – 1.3
For control of eucalyptus re-sprouts, apply this product using a handheld sprayer when re-sprouts are 6
to 12 feet tall. Ensure complete coverage.
Gallberry 1.25 – 3.125 0.9 – 1.3
Gorse1* 1.25 – 3.125 0.9 – 1.3
Hackberry, western 1.25 – 3.125 0.9 – 1.3
Hasardia1* 1.25 – 2.5 0.9 – 1.3
Hawthorn 1.25 – 1.9 0.9
Hazel 1.25 – 1.9 0.9
Hickory1* 1.25 – 3.125 0.9 – 1.3
Honeysuckle 1.9 – 2.5 0.9
Hornbeam, American1* 1.25 – 3.125 0.9 – 1.3
Ivy, poison 2.5 – 3.125 1.3
Kudzu 2.5 – 3.125 1.3
Locust, black1* 1.25 – 2.5 0.9 – 1.3
Madrone (re-sprouts) 1* – 1.3
Manzanita1* 1.25 – 3.125 0.9 – 1.3
Maple, red 1.25 – 2.5 0.9
For control, apply a 0.9-percent solution of this product using a handheld sprayer when leaves are fully
developed. For partial control, apply 1.25 to 2.5 quarts per acre as a broadcast application.

APPENDIX 2
Master Label 524-659 Page 161 of 165 Revised June 2021
Species
Broadcast
Rate
(quarts/acre)
Handheld
Spray-to-Wet
Concentration
(% Solution)
Maple, sugar – 0.9
For control, apply this product using a handheld sprayer when at least 50 percent of the new leaves are
fully developed.
Maple, vine1* 1.25 – 3.125 0.9
Monkey flower1* 1.25 – 2.5 0.9 – 1.3
Oak; black, white1* 1.25 – 2.5 0.9 – 1.3
Oak; northern, pin 1.25 – 2.5 0.9
For control, apply this product when at least 50 percent of the new leaves are fully developed.
Oak, poison 2.5 – 3.125 1.3
Repeat applications might be needed to maintain control. Application in the fall must be made before
leaves lose green color.
Oak, post 1.9 – 2.5 0.9
Oak, red – 0.9
For control, apply this product using a handheld sprayer when at least 50 percent of the new leaves are
fully developed.
Oak, scrub1* 1.25 – 2.5 0.9
Oak, southern red 1.25 – 1.9 0.9
Orange, Osage 1.1 – 3.125 0.9 – 1.3
Peppertree, Brazilian (Florida holly)* 1.25 – 3.125 0.9 – 1.3
Persimmon1* 1.25 – 3.125 0.9 – 1.3
Pine 1.25 – 3.125 0.9 – 1.3
Poplar, yellow1* 1.25 – 3.125 0.9 – 1.3
Redbud, eastern 1.25 – 3.125 0.9 – 1.3
Rose, multiflora 1.25 0.9
Make application prior to leaf deterioration by leaf-feeding insects.
Russian olive1* 1.25 – 3.125 0.9 – 1.3
Sage, black 1.25 – 2.5 0.9
Sage, white1* 1.25 – 2.5 0.9 – 1.3
Sagebrush, California 1.25 – 2.5 0.9
Salmonberry 1.25 – 1.9 0.9
Saltcedar1* 1.25 – 3.125 0.9 – 1.3
For partial control, apply a 0.9- to 1.3-percent solution of this product using a handheld sprayer or 1.25
to 3.125 quarts per acre as a broadcast application. For control, apply a 0.9- to 1.3-percent solution of
this product in a tank-mix with Arsenal herbicide using a handheld sprayer. For control using broadcast
application, apply 1.25 quarts of this product per acre in a tank-mix with an appropriate rate of Arsenal
herbicide to plants less than 6 feet tall. To control saltcedar greater than 6 feet tall using broadcast
application, apply 2.6 quarts of this product per acre in a tank-mix with a higher rate of Arsenal herbicide.
Sassafras1* 1.25 – 3.125 0.9 – 1.3

APPENDIX 2
Master Label 524-659 Page 162 of 165 Revised June 2021
Species
Broadcast
Rate
(quarts/acre)
Handheld
Spray-to-Wet
Concentration
(% Solution)
Sourwood1* 1.25 – 3.125 0.9 – 1.3
Sumac; laurel, poison, smooth, sugarbush, winged1* 1.25 – 2.5 0.9 – 1.3
Sweetgum 1.25 – 1.9 0.9
Swordfern1* 1.25 – 3.125 0.9 – 1.3
Tallowtree, Chinese – 0.9
Tan oak (re-sprouts) 1* – 1.3
Thimbleberry 1.25 – 1.9 0.9
Tobacco, tree1* 1.25 – 2.5 0.9 – 1.3
Toyon1* – 1.3
Trumpetcreeper 1.25 – 1.9 0.9
Virginia creeper 1.25 – 3.125 0.9 – 1.3
Waxmyrtle, southern1* 1.25 – 3.125 0.9 – 1.3
Willow 1.9 – 2.5 0.9
Yerba santa1* – 1.3
1* Partial control
2 When using stem injection, the combined total use of this product must not exceed 6.75 quarts per acre
per year. At 5 milliliters of concentrated (undiluted) product per stem, 6.75 quarts of this product will treat
approximately 1300 stems per acre per year. The number of stems that can be treated per acre will vary
depending on the injection volume and the concentration of this product in the application solution.
13.0 TANK-MIX PRODUCT INFORMATION [this section printed only if required]
[This section is optional and only required if tank-mix product information is not included in the body of the
label text. Products not included on the final printed label may be deleted from this list. ]
Brand Name EPA Reg. No. Active Ingredient(s)
AAtrex 4L 100-497 atrazine
AAtrex Nine-O 100-585 atrazine
Arsenal 241-346 imazapyr
Arsenal Herbicide Applicator’s Concentrate 241-299 imazapyr
Banvel 66330-276 dicamba
Banvel 480 66330-421 dicamba
Barricade 4FL 100-1139 prodiamine
Barricade 65WG 100-834 prodiamine
Certainty Turf 59639-226 sulfosulfuron
Chopper 241-296 imazapyr
Chopper Gen2 241-430 imazapyr
Crossbow 62719-260 2,4-D, triclopyr
Direx 4L 66222-54 diuron

APPENDIX 2
Master Label 524-659 Page 163 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Endurance 100-834 prodiamine
Escort XP 432-1549 metsulfuron methyl
Forestry Garlon 4 Specialty 62719-40 triclopyr
Forestry Garlon XRT Specialty 62719-553 triclopyr
Formula 40 228-357 2,4-D
Garlon 3A Specialty 62719-37 triclopyr
Garlon 4 Specialty 62719-40 triclopyr
Garlon 4 Ultra Specialty 62719-527 triclopyr
Gallery 75 Dry Flowable Specialty 62719-145 isoxaben
Gallery SC 62719-658 isoxaben
Garlon XRT 62719-553 triclopyr
Goal 2XL 62719-424 oxyfluorfen
GoalTender 62719-447 oxyfluorfen
Habitat 241-426 imazapyr
Hyvar X 432-1546 bromacil
Hyvar X-L 432-1548 bromacil
Karmex DF 66222-51 diuron
Krenite S Brush Control Agent 42750-247 fosamine
Krovar 1 DF 5481-635 bromacil, diuron
Landmark XP 432-1560 sulfometuron methyl, chlorsulfuron
Oust Extra 432-1557 sulfometuron methyl, metsulfuron methyl
Oust XP 432-1552 sulfometuron methyl
Outrider 59639-223 sulfosulfuron
Pendulum 3.3 EC 241-341 pendimethalin
Pendulum AquaCap 241-416 pendimethalin
Plateau 241-365 imazapic
Poast 7969-58 sethoxydim
Poast Plus 7969-88 sethoxydim
Princep 4L 100-526 simazine
Princep Caliber 90 100-603 simazine
Princep Liquid 100-526 simazine
Ronstar 50 WSP 432-893 oxadiazon
Ronstar Flo 432-1465 oxadiazon
Ronstar G 432-886 oxadiazon
Sahara DG 241-372 imazapyr, diuron
Scythe 10163-325 pelargonic acid
Spike 20P Specialty 62719-121 tebuthiuron
Spike 80 DF Specialty 62719-107 tebuthiuron
Stalker 241-398 imazapyr
Surflan AS Agricultural 70506-43 oryzalin
Surflan AS Specialty 70506-44 oryzalin

APPENDIX 2
Master Label 524-659 Page 164 of 165 Revised June 2021
Brand Name EPA Reg. No. Active Ingredient(s)
Surflan Flex T&O 70506-308 oryzalin
Surflan XL 2G 70506-45 benefin, oryzalin
Telar XP 352-654
432-1561
chlorsulfuron
Tordon 101 Mixture Specialty 62719-5 2,4-D, picloram
Tordon 22K Specialty 62719-6 picloram
Tordon K Herbicide Specialty 62719-17 picloram
Transline Specialty 62719-259 clopyralid
Vanquish 228-397 dicamba
Vastlan Specialty 62719-687 triclopyr
Velpar DF CU 61842-48 hexazinone
Velpar DF VU 432-1576 hexazinone
Velpar L CU 61842-47 hexazinone
Velpar L VU 432-1573 hexazinone
Weedar 64 71368-1 2,4-D

14.0 LIMIT OF WARRANTY AND LIABILITY
Bayer CropScience (“Company) warrants that this product conforms to the chemical description on the
label. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS WARRANTY
OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS
MADE. This warranty is also subject to the conditions and limitations stated herein.
Buyer and all users shall use this product only for the purposes of and in accordance with the Complete
Directions for Use label (“Directions”) and shall promptly notify this Company of any claims whether based
in contract, negligence, strict liability, other tort or otherwise.
To the extent consistent with applicable law, buyer and all users are responsible for all loss, injuries or
damage from use or handling which results from conditions beyond the control of this Company, including,
but not limited to, incompatibility with products other than those set forth in the Directions, application to or
contact with desirable vegetation, crop injury or failure of this product to control weed biotypes which
develop resistance to glyphosate, unusual weather, weather conditions which are outside the range
considered normal at the application site and for the time period when the product is applied, as well as
weather conditions which are outside the application ranges set forth in the Directions, use and/or
application in any manner not explicitly set forth in or inconsistent with the Directions, moisture conditions
outside the moisture range specified in the Directions, or the presence of products other than those set
forth in the Directions in or on the soil, crop or treated vegetation.
This Company does not warrant any product reformulated or repackaged from this product except in
accordance with this Company’s stewardship requirements and with express written permission from this
Company.
[Optional statement for agricultural-use products, if applicable: For in-crop (over-the-top) uses on Roundup
Ready and other glyphosate-tolerant crops, to the extent consistent with applicable law, crop safety and
weed control performance are not warranted by Bayer CropScience when this product is used in
conjunction with “brown bag” or “bin run” seed saved from previous year’s production and replanted.]

APPENDIX 2
Master Label 524-659 Page 165 of 165 Revised June 2021
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR
ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF
THIS PRODUCT (INCLUDING CLAIMS BASED IN CONTRACT, NEGLIGENCE , STRICT LIABILITY,
OTHER TORT OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR BUYER
FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE ELECTION OF THIS COMPANY OR
ANY OTHER SELLER, THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
PURCHASE, REPLACEMENT OF SUCH QUANTI TY. TO THE EXTENT CONSISTENT WITH
APPLICABLE LAW, IN NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
Upon opening and using this product, buyer and all users are deemed to have accepted the terms of this
LIMIT OF WARRANTY AND LIABILITY which may not be varied by any verbal or written agreement. If
terms are not acceptable, return at once unopened.
Roundup, Roundup PowerMAX and Design, [ALTERNATE BRAND NAME and DESIGN], RT3 and Design,
Transorb and Design, and TRUEBLUE ADVANTAGE PROVEN RELIABLE SUPPORTED and Design are
[registered] trademarks of Bayer Group.
[Optional text, if applicable: All other trademarks are the property of their respective owners.]

For MEDICAL and TRANSPORTATION Emergency ONLY Call
24 hours a day 1-800-334-7577
For PRODUCT USE Information Call 1-866-99BAYER (1-866-992-2987)
©[Year]
Packed for [Alternative text: Produced for] [Alternative text: Manufactured for]:
BAYER CROPSCIENCE
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI 63167
[Insert print plate number]

[Insert barcode]

MON 301108 Herbicide (PENDING) 01/12/2024

Page 1 of 4Supplemental Labeling 524-659 Submitted January 23, 2024
SUPPLEMENTAL LABELING
This supplemental label expires on December 9, 2027 and must not be used or distributed after this
date.
READ THE ENTIRE LABEL FOR [ INSERT BRAND NAME ] BEFORE PROCEEDING WITH
THE USE DIRECTIONS CONTAINED IN THIS SUPPLEMENTAL LABELING.
Primary Brand Name:
MON 301108 Herbicide
Alternate Brand Names:
Roundup PowerMAX® 3 Herbicide
EPA Reg. No. 524-659
USE WITH COTTON WITH GLYTOL® TECHNOLOGY
Keep out of reach of children
CAUTION
In case of an emergency involving this product, or for medical assistance, call toll-free 1-800-334-7577.
For product information or assistance using this product, call toll-free 1-800-331-2867.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
This label must be in the possession of the user at the time of herbicide application.
Read the label affixed to the [INSERT BRAND NAME] container before applying.
Use of [ INSERT BRAND NAME ] according to this labeling is subject to the use precautions and
limitations imposed by the label affixed to the [INSERT BRAND NAME] container.
AVOID CONTACT OF HERBICIDE WITH FOLIAGE, GREEN STEMS, EXPOSED NON-WOODY
ROOTS OR FRUIT OF CROPS, EXCEPT AS SPECIFIED FOR INDIVIDUAL ROUNDUP READY ® AND
OTHER GLYPHOSATE-TOLERANT CROPS, DESIRABLE PLANTS AND TREES, AS SEVERE PLANT
INJURY OR DESTRUCTION COULD RESULT.
See “PRODUCT INFORMATION” and “MIXING” sections of the [ INSERT BRAND NAME ] product
labeling for essential product information.
The directions for use of this product provided on this Supplemental Labeling are specific to cotton
containing Event GHB614, which includes Cotton with GlyTol Technology.
The directions for use of this product provided on this Supplemental Labeling are specific to and
may only be used with varieties designated as cotton with GlyTol Technology. Applications
described in this section made over the top of cotton other than cotton with GlyTol Technology will cause
crop injury and reduced yields. DO NOT combine the directions for use in this supplemental labeling with
those in the “Cotton with Roundup Ready Technology” or “Cotton with Roundup Ready Flex Technology”
section of the [ INSERT BRAND NAME ] product label. Drift of this product from an application made to
cotton with GlyTol Technology onto adjacent fields of post 4-leaf (node) cotton with Roundup Ready
Technology could cause extensive crop injury, including boll loss, delayed maturity and/or yield loss.
12/13/2024
524-659

Page 2 of 4Supplemental Labeling 524-659 Submitted January 23, 2024
TYPES OF APPLICATION: Preplant; At-Planting; Preemergence; Postemergence (In-crop); Preharvest
USE INSTRUCTIONS: Refer to the following table for maximum application rates of this product with
cotton with GlyTol Technology.
Maximum Application Rates
Combined total per year for all applications 5 quarts per acre
Total for all Preplant, At-Planting, Preemergence applications 3.125 quarts per acre
Total for all In-crop applications from cracking to 60 percent open bolls 3.75 quarts per acre
Total for all In-crop applications between layby and 60 percent open bolls 40 fluid ounces per acre
Total for all In-crop applications from 60 percent open bolls to 7 days
prior to harvest 40 fluid ounces per acre
Total for all In-crop applications from emergence through harvest 3. 75 quarts per acre
See the “ROUNDUP READY AND OTHER GLYPHOSATE-TOLERANT CROPS” section of the [INSERT
BRAND NAME] product label for information regarding the use of this product in Roundup Ready and
other listed glyphosate-tolerant crops. See the “PRODUCT INFORMATION” section of the [ INSERT
BRAND NAME] product label for more information on Maximum Application Rates.
Preplant, At-Planting, Preemergence
USE INSTRUCTIONS: This product may be applied before, during or after planting cotton with GlyTol
Technology.
TANK MIXTURES: This product may be tank-mixed with 2,4-D or dicamba and applied prior to planting
only. This product may be tank-mixed with one or more products containing the active ingredients listed
below, or one or more of the products listed, and applied prior to crop emergence. Ensure that the
product used is labeled for application prior to emergence of cotton. It is the responsibility of the pesticide
user to ensure that the intended use is included on the label of all products added to a tank mixture.
Read and follow label directions for all products added to the mix.
[Active ingredients and products included on the final printed label for tank-mixing may be
selected from the following list:
acetochlor; clomazone; diuron; flumioxazin; fluometuron; fomesafen; metolachlor; s-metolachlor;
norflurazon; pendimethalin; prometyrn; pyrithiobac-sodium; saflufenacil
Warrant Herbicide (EPA Reg. No. 524-591; acetochlor); Warrant Ultra Herbicide (EPA Reg. No.
524-620; acetochlor, fomesafen)]
RESTRICTIONS: Maximum quantity of this product that may be applied for all preplant, at-planting and
preemergence applications combined is 3.125 quarts per acre per season.
Postemergence (In-crop)
USE INSTRUCTIONS: This product may be applied to control annual grasses and broadleaf weeds listed
on this label in cotton with GlyTol Technology. To maximize yield potential, eliminate competing weeds
early. Many perennial weeds will be controlled or suppressed with one or more applications of this
product. Use an initial application rate of 20 fluid ounces per acre to control or suppress 1- to 3-inch-tall
annual grasses and broadleaf weeds. This product may be applied postemergence to cotton with GlyTol
Technology using ground application equipment at rates up to 30 fluid ounces per acre per application. In
addition to broadcast application, post-directed spray equipment may be used to achieve more thorough
weed coverage.
IN THE STATES OF ARIZONA, NEW MEXICO AN D TEXAS (WEST OF I-35) ONLY, up to 40 fluid
ounces of this product per acre may be applied per postemergence application using ground application
equipment.

Page 3 of 4Supplemental Labeling 524-659 Submitted January 23, 2024
.
TANK MIXTURES: This product may be tank-mixed with products containing one or more of the active
ingredients listed below, or one or more of the products listed, and applied postemergence (in-crop) over
the top of cotton with GlyTol Technology.
[Active ingredients and products included on the final printed label for tank-mixing may be
selected from the following list:
acetochlor; clethodim; metolachlor; s-metolachlor
Warrant Herbicide (EPA Reg. No. 524-591; acetochlor)]
This product may be tank-mixed with products containing one or more of the active ingredients listed
below, or one or more of the products listed, for in-crop application using precision post-directed or
hooded sprayers.
[Active ingredients and products included on the final printed label for tank-mixing may be
selected from the following list:
acetochlor; carfentrazone-ethyl; diuron; flumioxazin; fluometuron; fomesafen; linuron; metolachlor;
monosodium acid methanearsonate; pendimethalin; prometyrn; pyrithiobac-sodium;
trifloxysulfuron-sodium
Warrant Herbicide (EPA Reg. No. 524-591; acetochlor); Warrant Ultra Herbicide (EPA Reg.
No. 524-620; acetochlor, fomesafen)]
Ensure that the product used is labeled for application postemergence (in-crop) to cotton. It is the
responsibility of the pesticide user to ensure that the intended use is included on the label of all products
added to a tank mixture. Read and follow label directions for all products added to the mix.
RESTRICTIONS: The maximum single, in-crop application rate of this product to cotton with GlyTol
Technology using ground application equipment is 30 fluid ounces per acre, except in Arizona, New
Mexico and west Texas (west of I-35 only), where up to 40 fluid ounces per acre may be applied in a
single application using ground application equipment. In-crop application rates above 20 fluid
ounces per acre made alone or with the addition of other crop chemical products containing
surfactant could cause a crop response including leaf speckling or leaf necrosis. Do not exceed a
maximum single, in-crop application rate of 20 fluid ounces of this product per acre when using aerial
application equipment, except in Arizona, New Mexico and west Texas (west of I-35 only), where up to 30
fluid ounces may be applied as a single application using aerial application equipment. Between layby
and 60 percent open bolls, the maximum combined total application rate of this product is 40 fluid ounces
per acre. The combined total for all applications of this product made from crop emergence to 60 percent
open bolls must not exceed 3.75 quarts per acre.
DO NOT ADD ADDITONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT TO THIS
PRODUCT FOR OVER-THE-TOP APPLICATION TO COTTON WITH GYLTOL TECHNOLOGY.
Preharvest
USE INSTRUCTIONS: Up to 40 fluid ounces of this product per acre may be applied to cotton with
GlyTol Technology for annual and perennial weed control prior to harvest after 60 percent boll crack.
NOTE: This product will not enhance the performance of harvest aids when applied to cotton with GlyTol
Technology.
RESTRICTIONS: Allow a minimum of 7 days between application and harvest of cotton with GlyTol
Technology. DO NOT ADD ADDITIONAL SURFACTANT OR ADDITIVES CONTAINING SURFACTANT
TO THIS PRODUCT FOR PREHARVEST APPLICATION TO COTTON WITH GLYTOL TECHNOLOGY.
ATTENTION: USE OF THIS PRODUCT IN ACCORDANCE WITH LABEL DIRECTIONS IS EXPECTED
TO RESULT IN NORMAL GROWTH OF COTTON WITH GLYTOL TECHNOLOGY. HOWEVER, DUE

Page 4 of 4Supplemental Labeling 524-659 Submitted January 23, 2024
TO THE SENSITIVITY OF COTTON FRUITING TO VARIOUS ENVIRONMENTAL CONDITIONS,
AGRONOMIC PRACTICES AND OTHER FACTORS, IT IS IMPOSSIBLE TO ELIMINATE ALL RISKS
ASSOCIATED WITH THIS PRODUCT, EVEN WHEN APPLICATIONS ARE MADE IN ACCORDANCE
WITH THE LABEL DIRECTIONS. IN SOME CASES, THESE FACTORS CAN RESULT IN BOLL LOSS,
DELAYED MATURITY AND/OR YIELD LOSS.
Read the “Limit of Warranty and Liability” on the [ INSERT BRAND NAME] product labeling before using.
These terms apply to this Supplemental Labeling. If these terms are not acceptable, return the product
unopened at once.
[INSERT BRAND NAME], Roundup Ready and Warrant are trademarks of the Bayer Group. GlyTol is a
registered trademark of BASF.
©[YEAR]
BAYER CROPSCIENCE LP
800 N. LINDBERGH BLVD.
ST. LOUIS, MISSOURI 63167
[INSERT DATE]
[PRINT PLATE NUMBER]