crop-chem-docs/corpus/epa_ppls/5905-652.md

# OMNI BRAND S-MOC 82.4% SAFENED

- EPA Reg No: **5905-652**
- Registrant: HELENA AGRI-ENTERPRISES, LLC, D/B/A HELENA CHEMICAL COMP
- Signal word: Warning
- Active ingredients: S-Metolachlor (82.4%)
- Label accepted: 2022-02-24
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/005905-00652-20220224.pdf

---
Registration Notice Unconditional v.20150320 
 
 
 U.S. ENVIRONMENTAL PROTECTION AGENCY 
Office of Pesticide Programs 
Registration Division (7505P) 
1200 Pennsylvania Ave., N.W. 
Washington, D.C. 20460 
 
EPA Reg. Number: 
 
5905-652 
 
Date of Issuance: 
 
2/24/22 
NOTICE OF PESTICIDE: 
 X Registration 
 Reregistration 
 
Term of Issuance: 
Unconditional 
 (under FIFRA, as amended) 
Name of Pesticide Product: 
Omni Brand S-Moc 82.4% Safened 
 
Name and Address of Registrant (include ZIP Code): 
Helena Agri-Enterprises, LLC 
225 Schilling Blvd., Suite 300 
Collierville, TN 38017 
 
 
Note: Changes in labeling differing in substance from that accepted in connection with this registration must be submitted to and accepted by the 
Registration Division prior to use of the label in commerce. In any correspondence on this product always refer to the above EPA registration number. 
 
On the basis of information furnished by the registrant, the above named pesticide is hereby registered 
under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). 
 
Registration is in no way to be construed as an endorsement or recommendation of this product by the 
Agency. In order to protect health and the environment, the Administrator, on his motion, may at any 
time suspend or cancel the registration of a pesticide in accordance with the Act. The acceptance of any 
name in connection with the registration of a product under this Act is not to be construed as giving the 
registrant a right to exclusive use of the name or to its use if it has been covered by others. 
 
This product is unconditionally registered in accordance with FIFRA section 3(c)(5) provided that you: 
 
1. Submit and/or cite all data required for registration/reregistration/registration review of your 
product when the Agency requires all registrants of similar products to submit such data. 
 
2. Submit one copy of the revised final printed label for the record before you release the product 
for shipment. 
 
 
Continues page 2 
 
 
Signature of Approving Official: 
 Mindy Ondish, Product Manager 23 
Herbicide Branch, Registration Division (7505P) 
 
Date: 
 
 
 2/24/22 
EPA Form 8570-6

Page 2 of 2 
EPA Reg. No. 5905-652 
Decision No. 578430 
 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be aware 
that the website becomes labeling under FIFRA and is subject to review by the Agency. If the website is 
false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA 
section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, claims 
made on the website may not substantially differ from those claims approved through the registration 
process. Therefore, should the Agency find or if it is brought to our attention that a website contains 
false or misleading statements or claims substantially differing from the EPA approved registration, the 
website will be referred to the EPA’s Office of Enforcement and Compliance. 
 
If these conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. Your release for shipment of the product constitutes acceptance of these 
conditions. A stamped copy of the label is enclosed for your records. 
 
The alternate brand name, “Omni Brand S-Moc 82.4%” is noted for this product. 
 
Please also note that the record for this product currently contains the following CSF: 
 
 Basic CSF dated 9/1/2021 
 
If you have any questions, please contact Derek Corbin by phone at 202-566-2571, or via email at 
Corbin.Derek@epa.gov. 
 
 
Enclosure

Omni Brand S-Moc 82.4% Safened master label 1 
 
 
[Text in brackets [] indicates optional language or language intended for explanatory purposes to 
facilitate label review. Thus, this language will often not appear on final printed labeling.] 
 
Omni Brand S-Moc 82.4% Safened 
Master Label 
 
[Alternate Brand Name: Omni Brand S-Moc 82.4%] 
 
Sublabel 1: Agricultural uses including supplemental labels 
Sublabel 2: Non-agricultural uses 
 
 
02/24/2022
5905-652

Omni Brand S-Moc 82.4% Safened master label 2 
 
[Text in brackets [ ] indicates optional language or language intended for explanatory purposes to 
facilitate label review. Thus, this language will often not appear on final printed labeling.] 
 
[Sublabel 1: Agricultural Uses] 
S-METOLACHLOR GROUP 15 HERBICIDE 
Omni Brand S-Moc 82.4% Safened 
[Alternate Brand Name: Omni Brand S-Moc 82.4%] 
 
Sale, use and distribution of this product in Nassau and Suffolk Counties in the 
State of New York is prohibited. 
For weed control in beans, peas, and lentils; corn; cotton; grasses grown for seed; horseradish; 
peanuts; potatoes; pumpkin; rhubarb; safflowers; sweet, grain, or forage sorghum; soybeans; 
soybeans, immature seed; sugarcane; sugar beets; sunflowers; tomatoes 
 Active Ingredient: BY WT. 
S-metolachlor (CAS No. 87392-12-9) ................................................................................ 82.4% 
Other Ingredients: ........................................................................................................... 17.6% 
Total: ................................................................................................................................. 100.0% 
This product contains 7.64 lbs. of active ingredient per gallon. 
This product is formulated as an emulsifiable concentrate (EC). 
KEEP OUT OF REACH OF CHILDREN 
WARNING – AVISO 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do 
not understand the label, find someone to explain it to you in detail.) 
FIRST AID 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing 
eye. 
• Call a Poison Control Center or doctor for treatment advice. 
If on skin or 
clothing • Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a Poison Control Center or doctor for treatment advice. 
If swallowed • Call a Poison Control Center or doctor immediately for treatment advice. 
• Have person sip a glass of water if able to swallow. 
• Do not induce vomiting unless told to by a Poison Control Center or doctor. 
• Do not give anything to an unconscious person. 
If inhaled • Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, 
preferably mouth-to-mouth, if possible. 
• Call a Poison Control Center or doctor for further treatment advice.

Omni Brand S-Moc 82.4% Safened master label 3 
 
Have the product container or label with you when calling a poison control center or doctor or going for 
treatment. For medical treatment, call the Rocky Mountain Poison & Drug Safety at 1-866-673-6671. 
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call 
CHEMTREC 1-800-424-9300. 
Manufactured for: 
Helena Agri-Enterprises, LLC EPA Reg. No. 5905-652 
225 Schilling Boulevard, Suite 300 EPA Est. No. 
Collierville, TN 38017 
Net Contents: _________________ 
 
See attached booklet for additional Precautionary Statements and complete Directions For Use 
 
PRECAUTIONARY STATEMENTS 
 
Hazards to Humans and Domestic Animals 
WARNING 
Causes substantial but temporary eye injury. Harmful if absorbed through skin. Harmful if swallowed. Do 
not get in eyes or on clothing. Wear protective eyewear (goggles, face shield, or safety glasses). 
Personal Protective Equipment (PPE) 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Waterproof gloves 
• Shoes plus socks 
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
Engineering Control Statements 
Mixers and loaders supporting aerial applications are required to use closed systems. The closed system 
must be used in a manner that meets the requirements listed in the Worker Protection Standard (WPS) 
for agricultural pesticides [40 CFR 170.607(d)]. When using the closed system, the mixers’ and loaders’ 
PPE requirements may be reduced or modified as specified in the WPS. 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607(d- f)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
User Safety Recommendations 
Users should: 
• Wash hands thoroughly with soap and water immediately after handling and before eating, drinking, 
chewing gum, using tobacco, or using the toilet. 
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. 
As soon as possible, wash thoroughly and change into clean clothing.

Omni Brand S-Moc 82.4% Safened master label 4 
 
Environmental Hazards 
Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the 
mean high water mark. Do not contaminate water when disposing of equipment wash water or rinsate. 
Reporting Ecological Incidents: to report ecological incidents, including mortality, injury, or harm to plants 
and animals, call 901-761-0050. 
Groundwater Advisory 
S-metolachlor is known to leach through soil into groundwater under certain conditions as a result of label 
use. This chemical may leach into groundwater if used in areas where soils are permeable, particularly 
where the water table is shallow. 
Surface Water Advisory 
This product may impact surface water quality due to runoff of rain water. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having high potential for 
reaching surface water via runoff for several weeks or months after application. A level, well -maintained 
vegetative buffer strip between areas to which this product is applied and surface water features such as 
ponds, streams, and springs will reduce the potential loading of s-metolachlor from runoff water and 
sediment. Runoff of this product will be reduced by avoiding applications when rainfall or irrigation is 
expected to occur within 48 hours. 
Non-target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non- target organisms, 
including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target 
organisms by following label directions intended to minimize spray drift. 
Mixing/Loading Instructions 
When using this product take care to prevent back-siphoning into wells, spills, or improper disposal of 
excess pesticide, spray mixtures, or rinsates. 
Check-valves or anti-siphoning devices must be used on all mixing and/or irrigation equipment. 
This product may not be mixed or loaded within 50 ft. of perennial or intermittent streams and rivers, 
natural or impounded lakes, and reservoirs. This product may not be mixed/loaded or used within 50 ft. of 
all wells, including abandoned wells, drainage wells, and sink holes. Operations that involve mixing, 
loading, rinsing, or washing of this product into or from pesticide handling or application e quipment or 
containers within 50 ft. of any well are prohibited, unless conducted on an impervious pad constructed to 
withstand the weight of the heaviest load that may be positioned on or moved across the pad. Such a pad 
shall be designed and maintained to contain any product spills or equipment leaks, container or 
equipment rinse or wash water, and rain water that may fall on the pad. Surface water shall not be 
allowed to either flow over or from the pad, which means the pad must be self -contained. The pad shall 
be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to contain at a 
minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. A 
pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the 
pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container 
or application equipment on the pad. Containment capacities as described above shal l be maintained at 
all times. The above-specified minimum containment capacities do not apply to vehicles when delivering 
pesticide shipments to the mixing/loading site. 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of W arranty and Liability 
before buying or using this product. If the terms are not acceptable, return the product at once, unopened, and 
the purchase price will be refunded. 
DIRECTIONS FOR USE 
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. 
Endangered Species Protection Requirements:

Omni Brand S-Moc 82.4% Safened master label 5 
 
It is a Federal offense to use any pesticide in a manner that results in an unauthorized “take” (e.g., kill or 
otherwise harm) of an endangered species and certain threatened species, under the Endangered 
Species Act section 9. When using this product, you must follow the measures contained in the 
Endangered Species Protection Bulletin for the area in which you are applying the product. You must 
obtain a Bulletin no earlier than six months before using this product. To obtain Bulletins, consult 
http://www.epa.gov/espp/, call 1-844-447-3813, or email ESPP@epa.gov. You must use the Bulletin valid 
for the month in which you will apply the product 
Use this product only in accordance with directions on this label or in separately published EPA accepted 
supplemental labeling directions for this product. 
Do not apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to your 
State or Tribe, consult the agency responsible for pesticide regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Work er Protection Standard, 40 CFR part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, 
and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions 
pertaining to the statements on this label about personal protective equipment (PPE) and restricted- entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker 
Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 
hours. Exception: If the product is soil-injected or soil-incorporated, the Worker Protection Standard, under 
certain circumstances, allows workers to enter the treated area if there will be no contact with anything that has 
been treated. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, such as plants, soil, or water is: 
• Coveralls 
• Waterproof gloves 
• Shoes plus socks 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS LABEL MAY 
RESULT IN POOR WEED CONTROL, CROP INJURY, OR ILLEGAL RESIDUES. 
To avoid spray drift, do not apply under windy conditions. Avoid spray overlap, as crop injury may result. 
Sale, use and distribution of this product in Nassau and Suffolk Counties in the State of New York is 
prohibited. 
 
PRODUCT INFORMATION 
 
Observe all precautions, restrictions and limitations on the labels of each product used in tank mixtures. 
Tank mixtures are permitted only in those states where the tank mix partner is registered. Refer to and 
follow the label for each tank mix product used for precautionary statements, directions for use, 
geographic and other restrictions. 
Omni Brand S-Moc 82.4% Safened is a selective herbicide for use as a preplant surface- applied, preplant 
incorporated, or preemergence treatment in water or fluid fertilizer for control of most annual grasses and 
certain broadleaf weeds in labeled crops. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and 
follow the applicable restrictions and limitations and directions for use on all product labels involved in tank 
mixing. Users must follow the most restrictive directions for use and precautionary statements of each product 
in the tank mixture. 
Precautions

Omni Brand S-Moc 82.4% Safened master label 6 
 
• Dry weather following preemergence application of Omni Brand S-Moc 82.4% Safened or a tank 
mixture may reduce effectiveness. Cultivate if weeds develop. 
• If Omni Brand S-Moc 82.4% Safened is incorporated, any supplemental tillage before planting 
must not exceed the depth of incorporation. 
• Certain states may have established rate limitations for atrazine within specific geographical 
areas. Consult your state lead pesticide control agency for additional information. It is a violation 
of this label to deviate from state use regulations. 
• Where reference is made to weeds partially controlled, partial control can either mean erratic 
control from good to poor, or consistent control at a level below that generally considered 
acceptable for commercial weed control. 
• Injury may occur following the use of Omni Brand S-Moc 82.4% Safened under abnormally high 
soil moisture conditions during early development of the crop. 
 
Restrictions 
• DO NOT apply under conditions which favor runoff or wind erosion of soil containing this product 
to non-target areas. 
• To prevent off-site movement due to runoff or wind erosion: 
o DO NOT treat powdery dry or light sand soils when conditions are favorable for wind 
erosion. Under these conditions, the soil surface should first be settled by rainfall or 
irrigation. 
o DO NOT apply to impervious substrates, such as paved or highly compacted surfaces. 
o DO NOT use tailwater from the first flood or furrow irrigation of treated fields to treat 
non-target crops, unless at least 1/2 inch of rainfall has occurred between application 
and the first irrigation. 
 
SPRAY DRIFT MANAGEMENT 
MANDATORY SPRAY DRIFT MANAGEMENT 
Ground Boom Applications 
• User must only apply with the release height recommended by the manufacturer, but no more than 4 
feet above the ground or crop canopy. 
• Applicators are required to select the nozzles and pressure that deliver medium or coarser droplets 
(ASABE S572). 
• Do not apply when wind speeds exceed 15 mph at the application site. 
• Do not apply during temperature inversions. 
Aerial Applications: 
• Do not release spray at a height greater than 10 ft. above the ground or vegetative canopy, unless a 
greater application height is necessary for pilot safety. 
• Applicators are required to select the nozzle and pressure that deliver medium or coars er droplets 
(ASABE S641). 
• If the wind speed is 10 miles per hour or less, applicators must use ½ swath displacement upwind at 
the downwind edge of the field. When the wind speed is between 11-15 miles per hour, applicators 
must use ¾ swath displacement upwind at the downwind edge of the field. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the wind speed is greater 
than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or 
less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the 
wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters. 
• Do not apply during temperature inversions. 
Boomless Ground Applications: 
• Applicators are required to select the nozzle and pressure that deliver a medium or coarser droplet 
size (ASABE S572.3) for all applications. 
• Do not apply when wind speeds exceed 15 mph at the application site.

Omni Brand S-Moc 82.4% Safened master label 7 
 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF 
NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
Boomless Ground Applications: 
 • Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions. 
Controlling Droplet Size – Ground Boom 
• Volume – Increasing the spray volume so that larger droplets are produced will reduce spray drift. 
Use the highest practical spray volume for the application. If a greater spray volume is needed, 
consider using a nozzle with a higher flow rate. 
• Pressure – Use the lowest spray pressure recommended for the nozzle to produce the target 
spray volume and droplet size. 
• Spray Nozzle – Use a spray nozzle that is designed for the intended application. Consider using 
nozzles designed to reduce drift. 
Controlling Droplet Size – Aircraft 
 • Adjust Nozzles – Follow nozzle manufacturers’ recommendations for setting up nozzles. 
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
RELEASE HEIGHT – Aircraft 
Higher release heights increase the potential for spray drift. 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation. 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temper ature inversions. 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
Herbicide Resistance Management 
For resistance management, Omni Brand S-Moc 82.4% Safened is a Group 15 herbicide. Any weed 
population may contain or develop plants naturally resistant to Omni Brand S-Moc 82.4% Safened and 
other Group 15 herbicides.

Omni Brand S-Moc 82.4% Safened master label 8 
 
Weed species with acquired resistance to Group 15 may eventually dominate the weed population if 
Group 15 herbicides are used repeatedly in the same field. Appropriate resistance -management 
strategies should be followed. 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of Omni Brand S-Moc 82.4% Safened or other Group 15 herbicides within a 
growing season sequence or among growing seasons with different herbicide groups that control 
the same weeds in a field. Whenever possible incorporate multiple weed control practices 
including mechanical cultivation, biological management practices, and crop rotation. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where 
information on resistance in target weed species is available, use the less resistance-prone 
partner at a rate that will control the target weed(s) equally as well as the more resistance- prone 
partner. Consult your local extension service or certified crop advisor if you are unsure as to 
which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide use that includes scouting and 
uses historical information related to herbicide use and crop rotation, and that considers tillage (or 
other mechanical control methods), cultural (e.g. higher crop seeding rates; precision fertilizer 
application method and timing to favor the crop and not the weeds), biological (weed- competitive 
crops or varieties) and other management practices. 
• Scout fields before application to identify the weed species present and their growth stage to 
determine if the intended application will be effective. Scout after herbicide application to monitor 
weed populations for early signs of resistance development. Indicators of possible herbicide 
resistance include: (1) failure to control a weed species normally controlled by the herbicide at the 
dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-
controlled plants of a particular weed species; (3) surviving plants mixed with controlled 
individuals of the same species. If resistance is suspected, prevent weed seed production in the 
affected area by an alternative herbicide from a different group or by a mechanical method 
including hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning 
harvesting and tillage equipment when moving between fields, and planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use 
of this product and switch to another management strategy or herbicide with a different mode of 
action (MOA), if available. Treat weed escapes with an herbicide with a different MOA or use 
nonchemical methods to remove escapes. To the extent possible do not allow weed escapes to 
produce seeds, roots, or tubers. 
• Contact your local sales representative, crop advisor, or extension agent to find out if suspected 
resistant weeds to this MOA have been found in your region. If resistant biotypes of target weeds 
have been reported, use the application rates of this product specified for your local conditions. 
Tank mix products so that there are multiple effective mechanisms of action for each target weed. 
 
SOIL TEXTURES AND HERBICIDE RATES 
Where rates are based on coarse-, medium-, or fine-textured soils, it is understood that soil textural 
classes are generally categorized as follows: 
 COARSE MEDIUM FINE 
 Sand Loam Sandy clay loam 
 Loamy sand Silt loam Silty clay loam 
 Sandy loam Silt Clay loam 
Sandy clay 
Silty clay 
Clay 
 
Within rate ranges in the rate tables and elsewhere on this label, use the lower rate on soils relatively 
coarse-textured or low in organic matter; use the higher rate on soils relatively fine-textured or high in 
organic matter. 
Note: Omni Brand S-Moc 82.4% Safened may be applied preemergence alone, or in combination with 
tank mix partners specified on this label, following preplant incorporated herbicides when used according 
to their label instructions, provided that such use is not prohibited on the respective labels.

Omni Brand S-Moc 82.4% Safened master label 9 
 
Thoroughly clean sprayer or other application device before using. Dispose of cleaning solution in a 
responsible manner. Do not use a sprayer or applicator contaminated with any other materials, or crop 
damage or clogging of the application device may result. 
Omni Brand S-Moc 82.4% Safened APPLIED ALONE 
Weeds Controlled 
Omni Brand S-Moc 82.4% Safened is taken up by the shoots and/or roots of emerging weeds. This 
uptake results in the inhibition of shoot and root tissue growth soon after weed germination. Because 
Omni Brand S-Moc 82.4% Safened will not control emerged weeds, apply before weed emergence. 
If Omni Brand S-Moc 82.4% Safened is incorporated, do not exceed a 2- to 3-inch depth. Any tillage after 
the Omni Brand S-Moc 82.4% Safened incorporation and before planting should not exceed 2-3 inches. 
Dry weather following application of Omni Brand S-Moc 82.4% Safened may reduce weed control. 
Cultivate if weeds develop. 
Where reference is made to weeds partially controlled, partial control can either mean erratic control from 
good to poor or consistent control at a level below that generally considered acceptable for commercial 
weed control. Control of these weeds can be erratic, due partially to variable weat her conditions. The 
following procedures may improve the control of weeds listed as partially controlled in Table 1: 
1. Thoroughly till soil to destroy germinating and emerged weeds. 
2. Plant crop into moist soil immediately after tillage. If Omni Brand S-Moc 82.4% Safened is to 
be used preemergence, apply at planting or immediately after planting. 
3. If available, sprinkler irrigate within 2 days after application. Apply 1/2-1 inch of water. Use 
lower water volume (1/2 inch) on coarse-textured soils and higher volume (1 inch) on fine-
textured soils. Also, refer to the section on Center Pivot Irrigation Application for this 
method of applying Omni Brand S-Moc 82.4% Safened. 
4. If irrigation is not possible and rain does not occur within 2 days after planting and 
application, weed control may be decreased. Under these conditions, a uniform, shallow 
cultivation is recommended as soon as weeds emerge. 
Table 1: Weeds Controlled or Partially Controlled by Omni Brand S-Moc 82.4% 
Safened Applied Prior to Weed Emergence 
 
 GRASSES 
Barnyardgrass Echinochloa crus-galli C 
Crabgrass, large Digitaria ischaemum C 
Crabgrass, smooth Digitaria sanguinalis C 
Crowfootgrass Dactyloctenium aegyptium C 
Cupgrass, Prairie Eriochloa contracta C 
Cupgrass, Southwestern Eriochloa acuminata C 
Cupgrass, woolly Eriochloa villosa PC1 
Foxtail, bristly Setaria verticillata C 
Foxtail, giant Setaria faberi C 
Foxtail, green Setaria viridis C 
Common Name 
 
 Scientific Name 
 
Control (C) or 
 
Partial Control (PC)

Omni Brand S-Moc 82.4% Safened master label 10 
 
Foxtail, millet Setaria italica C 
Foxtail, yellow Setaria pumila C 
Goosegrass Eleusine indica C 
Johnsongrass (seedling) Sorghum halepense PC 
Millet, wild-proso Panicum miliaceum PC1 
Panicum, fall Panicum dichotomiflorum C 
Panicum, Texas Panicum texanum PC 
Rice, red Oryza punctata C 
Sandbur, field Cenchrus spinifex PC 
Ryegrass, Italian Lolium multiflorum C 
Sandbur, Southern Cenchrus spinifex PC 
Shattercane Sorghum bicolor PC 
Signalgrass, broadleaf Urochloa platyphylla C 
Sorghum (volunteer) Sorghum bicolor PC 
Witchgrass Panicum capillare C 
 
 BROADLEAF WEEDS 
Amaranth, Palmer Amaranthus palmeri C 
Amaranth, Powell Amaranthus powellii C 
Beggarweed, Florida Desmodium tortuosum PC 
Carpetweed Mollugo verticillata C 
Eclipta Eclipta prostrata PC 
Galinsoga, hairy Galinsoga quadriradiata C 
Galinsoga, smallflower Galinsoga parviflora C 
Nightshade, Eastern black Solanum ptychanthum C 
Nightshade, hairy Solanum physalifolium PC 
Pigweed, prostrate Amaranthus blitoides C 
Pigweed, redroot Amaranthus retroflexus C 
Pigweed, smooth Amaranthus hybridus C 
Pigweed, tumble Amaranthus albus C 
Purslane, common Portulaca oleracea PC

Omni Brand S-Moc 82.4% Safened master label 11 
 
Pusley, Florida Richardia scabra C 
Spiderwort, tropical Commelina benghalensis C 
Waterhemp, common Amaranthus rudis C 
Waterhemp, tall Amaranthus tuberculatus C 
 
 SEDGES 
 
1 Refer to the corn section of this label for additional information. 
ROTATIONAL CROPS SECTION 
Replanted Crop Directions 
This section covers replant crops that may be planted following a lost crop that has had an application of 
Omni Brand S-Moc 82.4% Safened. 
If a crop treated with Omni Brand S-Moc 82.4% Safened is lost, any crop on this label, or on a 
supplemental Omni Brand S-Moc 82.4% Safened label, may be replanted immediately provided that the 
rate of Omni Brand S-Moc 82.4% Safened applied to the previous crop was not greater than the labeled 
rate for the crop to be replanted. If the first application was banded and the replant crop is planted in the 
center of the untreated bands, a second banded treatment may be applied at the rate for the use pattern 
for the replant crop, provided the application does not overlap the first application band. 
 
Rotational Crop Directions 
Any food or feed crops not listed below or in the Additional Rotational Crop Options table must NOT be 
planted within 12 months of the last application of this product. 
 Crop(s) Replant Interval 
 Tobacco, Buckwheat, Rice The spring following the last treatment 
 Barley, Oats, Rye, Wheat 4.5 months 
 Alfalfa 4.0 months 
 Clover 9.0 months 
In order to make a replant application of this product, the previous crop must have had applied 2.0 pounds 
active ingredient, or less, of S -metolachlor (2 pints or less) per acre, and the previous crop must not have 
had a lay-by or other post-emergence application of this product. 
Note: If rotating to a crop listed in one of the crop groupings below within 60 days of last application, 
injury to the new crop may result. Also, if the amount of this product applied to the previous crop was 
more than listed below, the crop must not be planted until the following spring. 
Additional Rotational Crop Options 
Note that not all crops within each group are specifically listed. The plant-back interval applies to all the 
crops in the specific EPA crop group or subgroup listed. 
 
Amount of Omni Brand S-Moc 
82.4% Safened Applied 
Previously (Pints per Acre) 
Crops that May be Planted 60-days After the Last 
Application of Omni Brand S-Moc 82.4% Safened 
≤1.33 pts./A Crop Subgroup 1B: Root Vegetables (except sugar beet, 
except carrot) 
Amount of Omni Brand S-Moc 
82.4% Safened Applied 
Previously (Pints per Acre) 
Crops that May be Planted 60-days After the Last 
Application of Omni Brand S-Moc 82.4% Safened 
Nutsedge, yellow 
 
 Cyperus esculentus 
 
 C

Omni Brand S-Moc 82.4% Safened master label 12 
 
 Beet, garden; burdock, edible; celeriac; chervil, turnip-rooted; 
chicory; ginseng; horseradish; parsnip; radish; radish, 
oriental; rutabaga; salsify; skirret; turnip Crop Subgroup 3-
07B: Onion, green 
Chive leek, onion, Beltsville bunching; onion, fresh; onion, 
green; onion, Welsh; Shallot 
Crop Subgroup 4-16B: Brassica, leafy greens Bok 
choy; broccoli, Chinese; cabbage, Chinese (napa); 
collards; kale; greens, mustard; greens, turnip 
 
Crop Group 9: Vegetable, cucurbit 
Cantaloupe; citron melon; cucum ber; gourd; muskmelon; 
pumpkin; squash, summer; squash, winter; watermelon 
 
Carrot; leaf lettuce; sesame; strawberry; Swiss chard 
 
≤ 1.67 pts./A 
Crop Group 8-10: Fruiting Vegetables (except Tabasco 
pepper 
Eggplant; ground cherry (Physalis spp.); okra; pepino; 
peppers, bell, chili, cooking, pimento & sweet; tomatillo; tomato 
≤ 2.0 pts./A 
 Crop Subgroup 1C: Tuberous and Corm Vegetables 
Arracacha; arrowroot; artichoke (Jerusalem, Chinese); 
Cassava (bitter, sweet); chayote (root); chufa; dasheen (taro); 
ginger; potato; potato, sweet; tanier; turmeric; yam bean; yam, 
true 
Crop Group 3-07A: Onion, Bulb 
Garlic, bulb, garlic, great-headed; onion, dry bulb; shallot 
 
Crop Subgroup 22A: Stalk and Stem Vegetable (except 
Kohlrabi) 
Agave; asparagus; celtuce; fennel, Florence; fern, edible; kale, 
sea 
 
Crop Subgroup 22B: Leaf Petiole Vegetable 
Cardoon; celery, Chinese; celery; rhubarb 
 
Crop Subgroup 5-16: Brassica Head and Stem Vegetable 
Broccoli; Brussel sprouts; cabbage; cabbage, Chinese; 
cauliflower 
NOTE: A second application of S-metolachlor to the crops in the above table must 
NOT be made within 60 days of the original application. 
 
 
 APPLICATION PROCEDURES 
 
APPLICATION TIMING 
Omni Brand S-Moc 82.4% Safened alone or in some tank mixtures with other labeled herbicides may be 
applied for weed control in certain crops at various times. Refer to the given crop section of the label to 
determine if application timings listed below are indicated.

Omni Brand S-Moc 82.4% Safened master label 13 
 
Application Method Instructions 
Preplant Surface-
Applied 
Refer to individual crop section on this label to determine if early preplant 
surface application is indicated. For minimum-tillage or no-tillage systems 
only, Omni Brand S-Moc 82.4% Safened alone and some Omni Brand S-Moc 
82.4% Safened tank mixtures may be applied up to 45 days before planting 
certain crops. For treatments made 30-45 days before planting, use only split 
applications, with 2/3 the labeled broadcast rate for the crop and soil texture 
applied initially and the remaining 1/3 at planting. Treatments less than 30 
days before planting may be made either as a split or a single application. 
If weeds are present at the time of treatment, apply in a tank mixture 
combination with a contact herbicide (for example, products containing 
glyphosate or paraquat). Observe directions for use, precautions, and 
restrictions on the label of the contact herbicide. To the extent possible, do 
not move treated soil out of the row or move untreated soil to the surface 
during planting, or weed control will be diminished. 
Preplant 
Incorporated 
Apply Omni Brand S-Moc 82.4% Safened to the soil and incorporate into the 
top 2 inches of soil within 14 days before planting, using a finishing disk, 
harrow, rolling cultivator, or similar implement capable of providing uniform 2-
inch incorporation. Use a preplant incorporated application if furrow irrigation 
is used or when a period of dry weather after application is expected. If crop 
will be planted on beds, apply and incorporate Omni Brand S-Moc 82.4% 
Safened after bed formation, unless specified otherwise. 
Preemergence Apply Omni Brand S-Moc 82.4% Safened during planting (behind the planter) 
or after planting, but before weeds or crops emerge. 
Post emergence Omni Brand S-Moc 82.4% Safened will not control emerged weeds so apply 
only to a weed-free soil surface or in tank mixture with products that provide 
post emergence control of weeds present at the time of application. Refer to 
the individual crop section of this label if a post emergence application is 
indicated. 
 
SPECIAL APPLICATION PROCEDURES 
CA Only (Beans, Peas, and Lentils; Corn; Safflowers): Preplant Incorporated: Broadcast Omni 
Brand S-Moc 82.4% Safened alone or with tank mix partners listed on this label to the soil and thoroughly 
incorporate with a disk or similar implement set to till 4-6 inches deep. For more thorough incorporation, 
till the soil in 2 different directions (cross-till). Crops may be planted on flat surface or on beds. Use 
caution when forming the beds that only soil from the Omni Brand S-Moc 82.4% Safened treated zone is 
used (i.e., do not bring untreated soil to soil surface). If the application is made to preformed beds, 
incorporate Omni Brand S-Moc 82.4% Safened with a tillage implement set to till 2-4 inches deep. Take 
care during tilling to keep the tilled (Omni Brand S-Moc 82.4% Safened-treated) soil on the beds. 
Preemergence: Apply Omni Brand S-Moc 82.4% Safened after planting. Water with sprinkler or flood 
irrigation within 7-10 days. 
Fall Application for Spring Weed Control (Only in IA, MN, ND, SD, WI, and portions of NE and IL - 
See specific instructions in the Beans, Peas, and Lentils; Corn; and Soybeans sections of this 
label for timing of application and other information): Do not apply to frozen ground. Use on medium 
and fine soils with greater than 2.5% organic matter that will be planted to corn or soybeans the next 
spring. Ground may be tilled before or after application. Do not incorporate deeper than 2 to 3 inches if 
tilled after treatment. 
Restriction 
 • If a spring application is made, the total rate of the fall plus spring applications must not exceed the 
maximum total rate for the specific crop, or illegal residues may result.

Omni Brand S-Moc 82.4% Safened master label 14 
 
Fall Application for Italian Ryegrass Control (Corn, Cotton, Grain and Forage Sorghum, and 
Soybean Only – See specific instructions in the Corn, Cotton, Grain and Forage Sorghum, and 
Soybean sections of this label for timing of application and other information): Omni Brand S-Moc 
82.4% Safened may be applied in the fall (September 1-December 1) for residual control of glyphosate-
resistant Italian ryegrass (Lolium multiflorum). A tillage operation may precede the application. Do not 
incorporate deeper than 2-3 inches if tillage follows the application of Omni Brand S-Moc 82.4% Safened. 
Restrictions 
• DO NOT apply Omni Brand S-Moc 82.4% Safened to frozen ground. 
• All crops on the Omni Brand S-Moc 82.4% Safened label may be planted the following spring 
after application. 
• If a spring application is made, the combined total amount of Omni Brand S-Moc 82.4% Safened 
applied in the fall plus the spring must not exceed the maximum seasonal S-metolachlor rate for 
the specific crop planted, or illegal residues may result. 
• Refer to the crop sections on this label for specific directions. 
 
Ground Application: Apply Omni Brand S-Moc 82.4% Safened alone or in tank mixtures by ground 
equipment in a minimum of 10 gals. of spray mixture per acre, unless otherwise specified. 
Use sprayers that provide accurate and uniform application. For Omni Brand S-Moc 82.4% Safened tank 
mixtures with wettable powder or dry flowable formulations, use screens and strainers no finer than 50-
mesh. Rinse sprayer thoroughly with clean water immediately after use. 
Calculate the amount of herbicide needed for band treatment by the formula: 
 band width in inches broadcast rate amount needed 
 X = 
 row width in inches per acre per acre of field 
 
For information on applying in lower volumes of carrier, see Low Carrier Application section. 
For application by air or through center pivot systems, see Spray Drift Management sections. 
For information on impregnating dry fertilizer, see Dry Bulk Granular Fertilizer section. 
For information on application using variable-rate technologies, see Variable-Rate Application section. 
 
SPRAY EQUIPMENT 
 
LOW CARRIER APPLICATION 
For Broadcast Ground Application Only 
Use sprayers, such as Ag-Chem RoGator®, Hagie, John Deere Hi-Cycle™, Melroe Spra- Coupe, Tyler 
Patriot™, or Willmar Air Ride ®, that provide accurate and uniform application. Only water may be used 
as a carrier. Screens in suction and in-line strainers should be 50-mesh. Manufacturers may require that 
tip screens as fine as 100-mesh be used with some nozzles. Use a pump with capacity to: (1) maintain up 
to 35-40 psi at the nozzles, and (2) provide sufficient agitation in tank to keep mixture in suspension. Use 
a minimum of 5.0 gals. of spray mixture per acre. Maximum sprayer speed is 15 mph. Rinse sprayer 
thoroughly with clean water immediately after each use. 
Precautions 
• Use low pressure nozzles to reduce drift and increase application accuracy. 
• Take care when using automatic rate controlling devices to spray the material within the rated 
working pressure and flow ranges of the nozzles selected. 
 
• Use nozzle screens when specified by the manufacturer. 
• Place all nozzles on 20-inch centers, except flooding types which should be placed on 40-inch 
centers. When Flat Fan-type nozzles are used, angles of 80° or 110° are recommended.

Omni Brand S-Moc 82.4% Safened master label 15 
 
• Always read and follow the manufacturer’s directions for optimum setup and performance of their 
nozzles or tips. 
AERIAL APPLICATION 
Apply Omni Brand S-Moc 82.4% Safened in water alone or in tank mixtures metribuzin in a minimum total 
volume of 2.0 gals./A by aircraft. Omni Brand S-Moc 82.4% Safened may be applied by air in combination 
with atrazine, linuron, benefin, pendimethalin, trifluralin, or metribuzin. Avoid application under conditions 
where uniform coverage cannot be obtained or where excessive spray drift may occ ur. Apply at a 
maximum height of 10 ft., using low-drift nozzles at a maximum pressure of 40 psi, and only when wind 
speed does not exceed 10 mph. To ensure that spray will not adversely affect adjacent sensitive non-
target plants, apply Omni Brand S-Moc 82.4% Safened alone or Omni Brand S-Moc 82.4% Safened + 
atrazine by aircraft at a minimum upwind distance of 400 ft. from sensitive plants, or apply Omni Brand S -
Moc 82.4% Safened + linuron or metribuzin at a minimum upwind distance of 300 ft. from sensitiv e plants. 
Sensitive Areas 
The pesticide must only be applied when the potential for drift to adjacent sensitive areas (e.g., residential 
areas, bodies of water, known habitat for threatened or endangered species, non- target crops) is minimal 
(e.g., when wind is blowing away from the sensitive areas). 
Avoid application to humans or animals. Flagmen and loaders must avoid inhalation of spray mist and 
prolonged contact with skin. 
CENTER PIVOT IRRIGATION APPLICATION 
Omni Brand S-Moc 82.4% Safened alone or in tank mixture with other herbicides on this label, which are 
labeled for center pivot application, may be applied in irrigation water preemergence (after planting, but 
before weeds or crop emerge) at rates indicated on this label. Omni Brand S-Moc 82.4% Safened also 
may be applied post emergence to the crop and preemergence to weeds in crops where post emergence 
applications are allowed on this label. Follow all restrictions (height, timing, rate, etc.) to avoid illegal 
residues. Apply this product only through a center pivot irrigation system. Crop injury, lack of 
effectiveness, or illegal pesticide residues in the crop can result from non-uniform distribution of treated 
water. If you have questions about calibration, contact State Extension specialists, equipment 
manufacturers, or other experts. A person knowledgeable of the chemigation system and responsible for 
its operation, or under the supervision of the responsible person, shall shut the system down and make 
necessary adjustments if the need arises. 
Restrictions 
• DO NOT apply this product through any other type of irrigation system. 
• DO NOT connect an irrigation system (including greenhouse systems) used for pesticide 
application to a public water system, unless the pesticide label-prescribed safety devices for 
public water systems are in place. 
Operating Instructions 
1. The system must contain a functional check-valve, vacuum relief valve, and low pressure 
drain appropriately located on the irrigation pipeline to prevent water-source contamination 
from backflow. 
2. The pesticide injection pipeline must contain a functional, automatic, quick -closing check-
valve to prevent the flow of fluid back toward the injection pump. 
3. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the system 
interlock to prevent fluid from being withdrawn from the supply tank when the irrigation 
system is either automatically or manually shut down. 
4. The system must contain functional interlocking controls to automatically shut off the 
pesticide injection pump when the water pump motor stops. 
5. The irrigation line or water pump must include a functional pressure switch which will stop the 
water pump motor when the water pressure decreases to the point where pesticide 
distribution is adversely affected.

Omni Brand S-Moc 82.4% Safened master label 16 
 
6. Systems must use a metering pump, such as a positive displacement injection pump (e.g., 
diaphragm pump or piston pump), effectively designed and constructed of materials that are 
compatible with pesticides and capable of being fitted with a system interlock. 
7. Do not apply when wind speed favors drift beyond the area intended for treatment. 
8. Prepare a mixture with a minimum of 1 part water to 1 part herbicide(s) and inject this mixture 
into the center pivot system. Injecting a larger volume of a more dilute mixture per hour will 
usually provide more accurate calibration of metering equipment. Maintain sufficient agitation 
to keep the herbicide in suspension. 
9. Meter into irrigation water during entire period of water application. 
10. Apply in 1/2-1 inch of water. Use the lower water volume (1/2 inch) on coarse-textured soils 
and the higher volume (1 inch) on fine-textured soils. More than 1 inch of water at application 
may reduce weed control by moving the herbicide below the effective zone in the soil. 
Precaution for center pivot applications: Where sprinkler distribution patterns do not overlap 
sufficiently, unacceptable weed control may result. Where sprinkler distribution patterns overlap 
excessively, crop injury may result. 
DRY BULK GRANULAR FERTILIZERS 
Dry bulk granular fertilizers may be impregnated or coated with Omni Brand S-Moc 82.4% Safened alone 
or selected Omni Brand S-Moc 82.4% Safened tank mixtures provided that they are registered for 
preplant incorporated or preplant surface applications which are used to control weeds in crops on the 
Omni Brand S-Moc 82.4% Safened label; and that they are not prohibited from use on dry bulk granular 
fertilizers. 
When applying Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened mixtures with 
dry bulk granular fertilizers, follow all directions for use, restrictions, and precautions on the respective 
product labels regarding target crops, rates, soil texture, application methods (including timing of 
application), and rotational crops restrictions. 
Compliance with individual state regulations relating to dry bulk granular fertilizer blending, registration, 
labeling, and application is the responsibility of the individual and/or company selling the 
herbicide/fertilizer mixture. 
Prepare the herbicide/fertilizer mixtures by using any commonly used dry bulk fertilizer blender (such as 
closed drum, belt, ribbon) Nozzles used to spray Omni Brand S-Moc 82.4% Safened and Omni Brand S-
Moc 82.4% Safened mixtures onto the fertilizer must be placed to provide uniform spray coverage. Take 
care to aim the spray directly onto the fertilizer only and to avoid spraying the walls of the blender. 
If the herbicide/fertilizer mixture is too wet, add a highly absorptive material such as Agsorb® or Celatom 
MP-79, or similar granular clay or diatomaceous earth materials, to obtain a dry, free- flowing mixture. Add 
absorptive materials only after the herbicide has been thoroughly blended into the fertilizer mixture. Best 
application results will be obtained by using a granule of 6/30 particle size or of a size similar to that of the 
fertilizer material being used. Generally, less than 2% by weight of absorptive material will be needed. 
Avoid using more than 5% absorptive material by weight. 
Amounts of Omni Brand S-Moc 82.4% Safened, atrazine, atrazine + simazine, isoxaflutole, simazine, 
metribuzin, or ethafluralin can be calculated by using the following formula: 
 
 2,000 pts./A of liquid or pts. of liquid or flowable 
 X = 
 lbs. of fertilizer per acre flowable product product per ton of fertilizer 
 
 2,000 lbs./A of dry lbs. of dry product 
 X = 
 lbs. of fertilizer per acre product per ton of fertilizer

Omni Brand S-Moc 82.4% Safened master label 17 
 
Pneumatic (Compressed Air) Application (Omni Brand S-Moc 82.4% Safened Alone): High humidity, 
high urea concentrations, low fertilizer use rates, and dusty fertilizer may cause fertilizer mixture to build 
up or plug the distributor head, air tubes, or nozzle deflector plates. To minimize buildup, premix Omni 
Brand S-Moc 82.4% Safened with Exxon Aromatic 200 at a rate of 1.0-4.0 pts./gals. of Omni Brand S-
Moc 82.4% Safened. Aromatic 200 is a noncombustible/nonflammable petroleum product. Aromatic 200 
may be used in either a fertilizer blender or through direct injection systems. Do not use drying agents 
when using Aromatic 200. 
Precautions 
• Use mixtures of Omni Brand S-Moc 82.4% Safened and Aromatic 200 on dry fertilizer only. Poor 
results or crop injury may result if these mixtures are used in water or liquid fertilizer solutions for 
spraying applications. 
• When impregnating Omni Brand S-Moc 82.4% Safened in a blender before application, a drier 
mixture can be attained by substituting a drying agent for Aromatic 200. The use of Agsorb FG or 
drying agents of 6/30 particle size are recommended. 
 
Restrictions 
• To avoid potential for explosion, DO NOT impregnate Omni Brand S-Moc 82.4% Safened or 
Omni Brand S-Moc 82.4% Safened mixtures on ammonium nitrate, potassium nitrate, or sodium 
nitrate, either alone or in blends with other fertilizers. 
• DO NOT use Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened mixtures 
on straight limestone, since absorption will not be achieved. Fertilizer blends containing limestone 
can be impregnated.
 
• DO NOT use drying agents with On-The-Go impregnation equipment. 
Application 
Apply 200-700 lbs. of the herbicide/fertilizer mixture per acre. For best results, apply the mixture uniformly 
to the soil with properly calibrated equipment immediately after blending. Uniform application of the 
herbicide/fertilizer mixture is essential to prevent possible crop injury. Non-uniform application may also 
result in unsatisfactory weed control. In areas where conventional tillage is practiced, a shallow 
incorporation of the mixture into the soil may improve weed control. On fine- or medium-textured soils in 
areas where soil incorporation is not planned, i.e., reduced tillage situations or in some conventional till 
situations, make applications approximately 30 days before planting to allow moisture to move the 
herbicide/fertilizer mixture into the soil. On coarse-textured soils, make applications approximately 14 
days prior to planting. 
Precaution 
 • To avoid crop injury, do not use the herbicide/fertilizer mixture on crops where bedding occurs. 
 
MIXING INSTRUCTIONS 
 
Omni Brand S-Moc 82.4% Safened Alone: Mix Omni Brand S-Moc 82.4% Safened with water or fluid 
fertilizer and apply as a spray. Fill the spray tank 1/2-3/4 full with water or fluid fertilizer, add the proper 
amount of Omni Brand S-Moc 82.4% Safened then add the rest of the water or fluid fertilizer. Provide 
sufficient agitation during mixing and application to maintain a uniform emulsion. 
Tank Mixtures – follow this order: 
Fill the spray tank 1/4 full with water, and start agitation; 
Next add 2,4-D, atrazine, benefin, isoxaflutole, dicamba + atrazine, bentazon, 2,4-DB, metribuzin + 
chlorimuron-ethyl, prometryn, clomazone, fluometuron, EPTC, glufosinate, linuron, MSMA, simazine, 
pendimethalin, imazethapyr, imazaquin, metribuzin, ethafluralin, or trifluralin, and allow it to become 
dispersed; 
Add Omni Brand S-Moc 82.4% Safened; 
Then add paraquat, glyphosate + 2,4-D, or glyphosate if these products are being used;

Omni Brand S-Moc 82.4% Safened master label 18 
 
And finally add the rest of the water. 
For tank mixtures with atrazine, isoxaflutole, dicamba + atrazine, metribuzin + chlorimuron- ethyl, 
prometryn, clomazone, fluometuron*, EPTC, linuron, simazine, pendimethalin*, imazethapyr, imazaquin, 
metribuzin, ethafluralin, or trifluralin, fluid fertilizers may replace all or part of the water as carrier, except 
in the atrazine post emergence and the dicamba + atrazine post emergence tank mixes. For tank 
mixtures with atrazine, see additional mixing instructions on the atrazine label. For each mixture, check 
compatibility with fluid fertilizer, as described below, before mixing in spray tank. For all tank mixtures, 
agitate during mixing and application to maintain a uniform suspension. 
*See Special Mixing Instructions for tank mixtures with fluometuron and with atrazine or simazine + 
pendimethalin under the appropriate tank mixture section. 
For directions on how to conduct a compatibility test, see the Compatibility Test section. 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
COMPATIBILITY TEST 
A jar test is beneficial before tank mixing to ensure compatibility of Omni Brand S -Moc 82.4% Safened 
with other pesticides. The following test assumes a spray volume of 25 gals/A. For other spray volumes, 
make appropriate changes in the ingredients. 
Precautions: Nitrogen solutions or complete fluid fertilizers may replace all or part of the water in the 
spray. Because liquid fertilizers vary, even within the same analysis, always check compatibility with 
pesticide(s) before use. Incompatibility of tank mixtures is more common with suspensions of fertilizer 
and pesticides. 
Test Procedure 
1. Add 1.0 pt. of carrier (fertilizer or water) to each of 2 one qt. jars with tight lids. Restrictions: 
Use the same source of water that will be used for the tank mix and conduct the test at the 
temperature the tank mix will be applied. 
2. To one of the jars, add 1/4 tsp. or 1.2 milliliters of a compatibility agent approved for this use, 
such as Compex® or Unite® (1/4 tsp. is equivalent to 2.0 pts./100 gals. spray). Shake or stir 
gently to mix. 
3. To both jars, add the appropriate amount of pesticide(s) in their relative proportions based on 
label rates. If more than one pesticide is used, add them separately with dry pesticides first, 
flowables next, and emulsifiable concentrates last. After each addition, shake or stir gently to 
thoroughly mix. 
4. After adding all ingredients, put lids on and tighten, and invert each jar ten times to mix. Let 
the mixtures stand 15-30 minutes and then look for separation, large flakes, precipitates, 
gels, heavy oily film on the jar, or other signs of incompatibility. Determine if the compatibility 
agent is needed in the spray mixture by comparing the two jars. If either mixture separates, 
but can be remixed readily, the mixture can be sprayed as long as good agitation is used. If 
the mixtures are incompatible, test the following methods of improving compatibility: (a) Slurry 
the dry pesticide(s) in water before addition, or (b) add 1/2 the compatibility agent to the 
fertilizer or water and the other 1/2 to the emulsifiable concentrate or flowable pesticide 
before addition to the mixture. If incompatibility is still observed, do not use the mixture. 
5. After compatibility testing is complete, dispose of any pesticide wastes in accordance with the 
Storage and Disposal section in this label. 
Example Tank Mix Partner Products To tank mix, fill the solution tank 1/4 full with water and commence 
agitation. If the product to be tank mixed is underlined in the table, add it first and allow to disperse. Next add 
Omni Brand S-Moc 82.4% Safened, followed by any products NOT underlined in the table. Then add the 
remaining amount of water.

Omni Brand S-Moc 82.4% Safened master label 19 
 
Active Ingredient Brand Name(s) 
Alternative brands may be 
used 
EPA Registration Number(s) 
Alternative brands may be used 
2, 4-D 
 
Amine 4 42750-14-55467, 55467-14, 
71368-1-55467 
Lo-Vol 4 228-139-55467 
Lo-Vol 6 42750-20-55467, 71368-11-55467 
2,4-DB Butoxone 2749-126 & 2749-516 
Butyrac 42750-39 & 42750-38 
Acifluorfen Storm 7050-59 
 Ultra Blazer 70506-60 
Atrazine Atrazine 4L 55467-13, 100-497-55467, 19713- 
11-55467 
Atrazine 90DF 100-585-55467, 35915-3-55467 
AAtrex 100-497 & 100-585 
Benfluralin Balan 2.5G 8378-35 
Balan Dry Flowable 34704-746 
Bentazon Basagran 7969-45-(multiple),7969-112, 
70506-434 
Broadloom 70506-306 
Chlorimuron Classic 5481-681 
Clethodim Select 59639-3 
Clopyralid Stinger 62719-73 
Cloransulam FirstRate 5481-676 
Desmedipham Betanex 254-620 
Dicamba Detonate 7969-137-55467,42750-209- 
55467 
Banvel 55467-38 
Dicamba + Atrazine Marksman 7969-136 
Ethalfluralin Sonalan 10163-355 & 10163-356 
EPTC Eptam 10163-281 & 10163-283

Omni Brand S-Moc 82.4% Safened master label 20 
 
Flometuron Cotoran 4L 66222-181 
Fomesafen Flexstar 100-1101 
Flexstar GT 100-1325 
Reflex 100-993 
Fluazifop Fusilade 100-1070 
Fluazifop + Fenoxaprop Fusion 100-1059 
Flumetsulam Python 5481-677 
Glufosinate Autonomy 7969-448-55467 
Interline 70506-310 
Liberty 264-829 & 7969-448 
Glyphosate Roundup 524-549-(multiple) 
 Buccaneer 55467-9, 55467-10, 55467-15 
Glyphosate + 2,4-D Landmaster BW 42750-62 
Imazethapyr Pursuit 241-310 
Isoxaflutole Balance Pro 264-600 
Linuron Linuron DF 19713-251 
Linex 61842-21 
Lorox DF 61842-23 
Metribuzin Lexone 352-382 
Sencor 432-1469 & 264-738 
TriCor 70506-68 & 70506-103 
Metribuzin + Chlorimuron Canopy 352-444 
Metribuzin + Sulfentrazone Authority MTZ 279-3340 
s-Metolachlor + Fomesafen Prefix 100-1268 
MSMA MSMA 6 Plus 19713-42 
MSMA 6.6 19713-41 
Target 6 Plus 42519-3 
Target 6.6 42519-1

Omni Brand S-Moc 82.4% Safened master label 21 
 
Nicosulfuron Accent XP 352-817 
Paraquat Gramoxone 100-1431 & 100-1652 
Pendimethalin Acumen 241-337-55467, 70506-318, 
Prowl 241-337 & 241-418 
Satellite 3.3 70506-318 
Satellite HydroCap 70506-230 
Prometryn Caparol 100-620 
Quizalofop Assure II 5481-646 
Rimisulfuron-methyl Beacon 100-705 
Saflufenacil Sharpen 7969-278 
Saflufenacil + 
Dimethenamide-P 
 
Verdict 7969-279 
Sethoxydim Poast 7969-58-(multiple) 
Simazine Princep 100-526 & 100-603 
Sulfentrazone+ Cloransulam Sonic 62719-680 
Gauntlet 279-3246 
Sulfentrazone + Chlorimuron Authority Maxx 279-9560 
Sulfosate Touchdown 100-1117 
Trifluralin Treflan 34704-853-(multiple) 
Trisulfuron Upbeet 279-9584 
 
CROP USE DIRECTIONS 
 
CORN (ALL TYPES) – Omni Brand S-Moc 82.4% Safened ALONE 
Apply either preplant surface, preplant incorporated, preemergence, postemergence, or lay -by, using the 
rate specified below. 
PREPLANT SURFACE-APPLIED 
Refer to instructions for use of Omni Brand S-Moc 82.4% Safened alone under Application Procedures. 
Fall Application for Spring Weed Control: 
Apply after September 30 in ND, SD, MN, WI, and north of Route 30 in IA. 
Apply after October 15 north of Route 91 in NE and south of Route 30 in IA.

Omni Brand S-Moc 82.4% Safened master label 22 
 
Apply after October 31 north of Route 136 in IL. 
In all locations, apply to crop stubble after harvest when the sustained soil temperature at a 4- inch depth 
is less than 55°F and falling. In minimum-till or no-tillage systems on soils having greater than 2.5% 
organic matter, use 1.67-2.0 pts./A on medium-textured and 2.0 pts./A on fine-textured soils. A tillage 
operation may precede the application. A fall and/or a spring tillage may follow application, but do not 
incorporate deeper than 2-3 inches. Minimize furrow and ridge formation in the tillage operations. 
Fall Application for Italian Ryegrass Control: Omni Brand S-Moc 82.4% Safened may be applied for 
residual control of glyphosate-resistant Italian ryegrass (Lolium multiflorum). Apply Omni Brand S-Moc 
82.4% Safened at 1.33-1.67 pts./A in the fall (September 1-December 1) after harvest of the previous 
crop and prior to Italian ryegrass emergence. Use the lower Omni Brand S-Moc 82.4% Safened rate for 
coarse-textured soils and the higher rate for fine-textured soils. A tillage operation may precede the 
application. Do not incorporate to a depth greater than 2-3 inches if tillage follows the application of Omni 
Brand S-Moc 82.4% Safened. For fall applications after emergence of glyphosate- resistant Italian 
ryegrass, paraquat can be tank mixed with Omni Brand S-Moc 82.4% Safened to control emerged 
ryegrass. Refer to the paraquat label for specific rates, application instructions, and restrictions. Other 
registered herbicides may be tank mixed with Omni Brand S-Moc 82.4% Safened for control or improved 
control of other weeds present at the time of application. 
Restrictions 
• DO NOT apply Omni Brand S-Moc 82.4% Safened to frozen ground. 
• DO NOT apply more than 3.9 pts./A (3.77 lbs. ai) per year (depending on soil texture) through 
any combination of applications. 
 
Fall Application for Control or Suppression of Yellow Nutsedge (ID, OR, and WA only ): For 
preemergent control or suppression of yellow nutsedge the following spring, apply 1.33 pts./A of Omni 
Brand S-Moc 82.4% Safened in the fall after the harvest of the previous crop but before freeze- up. Fall 
applications of Omni Brand S-Moc 82.4% Safened can be surface-applied or incorporated. 
Restrictions 
• DO NOT make more than one fall application per crop. 
• DO NOT apply more than 1.33 pts./A in a single fall preplant application. 
• DO NOT apply to frozen ground. 
• DO NOT apply more than 3.9 pts./A (3.77 lbs. ai) per year (depending on soil texture) through 
any combination of applications. 
EARLY PREPLANT APPLICATIONS 
Use on medium- and fine-textured soils with minimum-tillage or no-tillage systems in CO, IA, IL, IN, KS, 
KY, MN, MO, MT, ND, NE, SD, TN, WI, and WY. Apply 2/3 the labeled rate of Omni Brand S-Moc 82.4% 
Safened (1.67 pts./A on medium soils and 2.0 pts./A on fine soils) as a split treatment 30-45 days before 
planting and the remainder at planting. Applications made less than 30 days prior to planting may be as 
either a split or single treatment. Apply 1.33 pts./A on coarse soils not more than 2 weeks before planting. 
Restriction 
• DO NOT apply more than 3.9 pts./A (3.77 lbs. ai) per year (depending on soil texture) through 
any combination of applications. 
 
On medium- and fine-textured soils with minimum- or no-tillage systems in CT, DE, MA, MD, ME, MI, NH, 
NY, OH, PA, RI, VA, VT, and WV, preplant surface applications may be applied following the directions 
for use above. If the amount of rainfall results in unsatisfactory length of weed control following the earlier 
treatment, a postemergence application of an appropriately labeled broadleaf and/or grass weed 
herbicide may be used, i.e., atrazine, primisulfuron-methyl, atrazine + s-metolachlor, nicosulfuron, 
dicamba + atrazine, bentazon, bromoxynil, or 2,4-D. If the postemergence treatment includes the 
herbicide used preplant surface-applied, do not exceed the total labeled rate for corn on a given soil 
texture. For extended residual or control of heavy weed infestations, up to 2.6 pts./A is allowed. Observe 
all directions for use, precautions, and limitations on the label of the postemergent herbicide.

Omni Brand S-Moc 82.4% Safened master label 23 
 
PREPLANT INCORPORATED OR PREEMERGENCE 
Follow instructions for use of Omni Brand S-Moc 82.4% Safened alone under Application Procedures. 
On coarse soils, apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened if organic matter content is 
less than 3%, or 1.33 pts./A if organic matter content is 3% or greater. On medium soils , apply 1.33-1.67 
pts./A of Omni Brand S-Moc 82.4% Safened. On fine soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 
82.4% Safened if organic matter content is less than 3%, or 1.67-2.0 pts./A if organic matter content is 3% 
or greater. For extended residual or control of heavy weed infestations, up to 2.6 pts./A is allowed. 
POSTEMERGENCE OR LAY-BY 
To extend the duration of weed control in corn, a maximum rate of 2.0 pts./A of Omni Brand S -Moc 82.4% 
Safened may be applied after corn emergence until the corn plants reach 40 inches in height, following 
any preplant surface-applied, preplant incorporated, or preemergence herbicide application, including 
Omni Brand S-Moc 82.4% Safened. For best results, apply to soil free of emerged weeds and directed 
toward the base of corn plants taller than 5 inches. The total Omni Brand S-Moc 82.4% Safened rate 
applied on corn during any one year must not exceed 3.9 pts./A, depending on soil texture. 
Restrictions for all applications to corn 
• DO NOT graze or feed forage from treated areas for 30 days following application. 
• PHI (Pre-Harvest Interval): DO NOT harvest sweet corn ears from treated areas for 30 days 
following application. 
PROBLEM WEED CONTROL DIRECTIONS 
Shattercane, Wild Proso Millet, Woolly Cupgrass, and Eclipta – Partial Control: For more consistent 
partial control of these weeds, apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened preplant 
incorporated followed by 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened preemergence. Make the 
premergence application during or after planting, but before weeds and corn emerge. Use the 1.33 pts./A 
rate when a heavy infestation is expected. A shallow cultivation may be needed to control any late 
emerging weeds. 
Woolly Cupgrass and Wild Proso Millet Control Program: For control of these species, use the 
following 3-step program: (1) Apply Omni Brand S-Moc 82.4% Safened early preplant, preplant 
incorporated, or preemergence at 1.67 pts./A on medium soils and 2.0 pts./A on fine-textured soils, up to 
the maximum label rate. Lightly incorporate with a rotary hoe if rainfall does not occur within 5-7 days; (2) 
Apply a postemergence tank mix of primisulfuron-methyl at 0.38 oz./A at 1 packet per 4 acres plus 
nicosulfuron at 0.33 oz./A plus 1.0 qt. of crop oil concentrate plus 1.0 gal./A of 28% nitrogen, or the 
equivalent amount of ammonium sulfate, when grasses are 2-3 inches tall and the corn is at least 4 
inches tall; and (3) Cultivate 14-21 days after the postemergence application. 
In the event of escape of annual weeds following a preplant surface, preplant incorporated, or 
preemergence treatment of Omni Brand S-Moc 82.4% Safened, follow with a postemergence application 
of an appropriately labeled broadleaf and/or grass weed herbicide, i.e., atrazine, primisulfuron- methyl, 
atrazine + s-metolachlor, nicosulfuron, dicamba + atrazine, bentazon, bromoxynil, or 2,4- D. If the 
postemergence treatment includes the herbicide used in the earlier treatment, do not exceed the total 
labeled rate for corn on a given soil texture. 
Restrictions 
• DO NOT apply more than the labeled application rate for a given soil texture per year through any 
combination of applications. 
• In corn, use up to 2.5 pts./A of Omni Brand S-Moc 82.4% Safened preplant surface, preplant 
incorporated, or preemergence treatment on soils having an organic matter content between 6% 
and 20%. 
• Bromoxynil may be applied postemergence alone or in tank mix combination with atrazine. DO 
NOT exceed the allowed amount of atrazine in tank mix combination with bromoxynil 
postemergence. Refer to the atrazine, and bromoxynil labels for specific rates and precautions. 
• DO NOT use Omni Brand S-Moc 82.4% Safened on peat or muck soils.

Omni Brand S-Moc 82.4% Safened master label 24 
 
CORN – Omni Brand S-Moc 82.4% Safened COMBINATIONS 
Omni Brand S-Moc 82.4% Safened in any tank mixture for corn may be applied in water or fluid fertilizer 
before corn emerges. Use only water as a carrier when Omni Brand S-Moc 82.4% Safened is applied 
after corn emergence. 
Restrictions 
• DO NOT graze or feed forage from treated areas for 30 days following application. 
• Pre-Harvest Interval (PHI): DO NOT harvest sweet corn ears from treated areas for 30 days 
following application. 
 
IMPORTANT: for tank mixtures with atrazine: 
If applying Omni Brand S-Moc 82.4% Safened in tank mixture with atrazine, follow all restrictions and rate 
limitations on the atrazine label. 
Some states may have established rate limitations for atrazine within specific geographical areas. Consult 
your state lead pesticide control agency for more information. It is a violation of this label to deviate from 
state use regulations. 
Table 2: Omni Brand S-Moc 82.4% Safened Tank Mixtures for Corn – Additional 
Weeds Controlled and Special Instructions 
 
Omni 
Brand S-
Moc 82.4% 
Safened 
+ atrazine 
and/ or 
simazine 
(Preplant 
Surface, 
PPI, PRE) 
Omni 
Brand S-
Moc 82.4% 
Safened + 
atrazine 
(Post) 
Omni 
Brand S-
Moc 
82.4% 
Safened + 
dicamba + 
atrazine 
(Field 
Corn) 
Omni 
Brand S-
Moc 
82.4% 
Safened + 
atrazine + 
linuron 
Omni Brand 
S-Moc 82.4% 
Safened + 
atrazine or 
simazine + 
pendimethalin 
Omni 
Brand S-
Moc 
82.4% 
Safened + 
atrazine + 
dicamba 
Omni 
Brand S-
Moc 82.4% 
Safened + 
isoxaflutole 
Special Mixing 
Instructions 1 
Comments 2,3,4,5,7,8 2,3,4,5 2,3,4,5,6 2,3,4,5 7 2,3,7 
Browntop panicum X X X X 
Cocklebur X 0 0 X X 0-X 
Common purslane X X X X X 
Hairy nightshade X X X X 
Jimsonweed X 0 X X 
Kochia X X X 
Lambsquarters X X X X X X X 
Morningglory X 0 0 X X X

Omni Brand S-Moc 82.4% Safened master label 25 
 
Mustard X X X 
Pigweed X X X X 
Prickly sida X 
Ragweed X X X X X X X 
Smartweed X X X X X X X 
Velvetleaf X X 0 X X 0-X 0-X 
X = control; 0 = partial control; 0-X = partial to full control depending on ratio of products used or on weed 
population 
Comments 
1. Special Mixing Instructions for Omni Brand S-Moc 82.4% Safened + atrazine or simazine and 
pendimethalin 
(1) Fill the spray tank 1/4 full with water or fluid fertilizer and start agitation. 
(2) To aid compatibility, add a compatibility agent, such as Unite or X-77®, at 4.0 pts./100 gals. of 
spray mixture. 
(3) Then add the atrazine or simazine and allow it to become dispersed. 
(4) Then add Omni Brand S-Moc 82.4% Safened and pendimethalin. 
(5) Add the rest of the water. 
2. Although a single formulation for atrazine or simazine is listed in the rate tables, other 
formulations may be substituted. 
3. Restriction: DO NOT apply more than the labeled rate of atrazine per acre per year. 
4. In Minimum-Tillage and No-Tillage systems, mix with paraquat for control of most emerged 
annual weeds and suppression of perennial weeds; or with glyphosate + 2,4-D for 
suppression of emerged field bindweed and control or suppression of annual weeds; or with 
or glyphosate for control of most emerged annual and perennial weeds. 
5. Refer to the Corn – Omni Brand S-Moc 82.4% Safened Combinations – Tank Mixture 
with atrazine; or atrazine + 2,4-D; or atrazine + 2,4-D + dicamba + atrazine for Minimum-
Tillage or No-Tillage Systems sections for specific directions for 2,4-D or dicamba + 
atrazine burndown combinations in Minimum-Tillage and No-Tillage systems. 
Omni Brand S-Moc 82.4% Safened in any tank mixture for corn may be applied in water or fluid fertilizer, 
except as noted. 
Refer to Corn (All Types) – Omni Brand S-Moc 82.4% Safened Alone for sequential postemergence 
treatments if escape weeds develop. 
Restrictions 
• For all applications to corn, DO NOT graze or feed forage from treated areas for 30 days 
following application. 
• PHI (Pre-Harvest Interval): DO NOT harvest sweet corn ears from treated areas for 30 
days following application. 
• When applying Omni Brand S-Moc 82.4% Safened in tank mixture with atrazine, DO 
NOT exceed the allowed amount of atrazine per acre per year.

Omni Brand S-Moc 82.4% Safened master label 26 
 
TANK MIXTURE WITH ATRAZINE OR SIMAZINE, OR ATRAZINE + SIMAZINE – 
PREPLANT SURFACE, PREPLANT INCORPORATED, OR PREEMERGENCE 
In addition to the weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + atrazine or simazine, or Omni Brand S-Moc 82.4% Safened + atrazine + simazine, 
applied preplant surface, preplant incorporated, or preemergence, also controls the following weeds: 
browntop panicum, cocklebur, common purslane, hairy nightshade, lambsquarters, morningglory, 
ragweed, smartweed, and velvetleaf. 
Apply Omni Brand S-Moc 82.4% Safened + atrazine or simazine or Omni Brand S-Moc 82.4% Safened + 
atrazine + simazine either preplant surface, preplant incorporated, or preemergence. 
Preplant Surface-Applied: Follow instructions for use of Omni Brand S-Moc 82.4% Safened alone under 
Application Procedures and under application instructions for Omni Brand S-Moc 82.4% Safened alone 
on corn. Apply the tank mixtures as a split or single treatment as indicated in the Omni Brand S-Moc 
82.4% Safened Alone – Preplant Surface-Applied section of the label for corn. 
Preplant Incorporated or Preemergence: Follow instructions for use of Omni Brand S-Moc 82.4% 
Safened alone under Application Procedures. Apply Omni Brand S-Moc 82.4% Safened + atrazine or 
simazine, or Omni Brand S-Moc 82.4% Safened + atrazine + simazine, using the rates from Table 3 and 
labeled rates of these tank mix partners. 
Restriction 
• DO NOT apply more than the labeled rate for a given soil texture per year through any 
combination of applications. 
Shattercane and Wild Proso Millet – Partial Control 
For more consistent partial control of shattercane or wild proso millet where Omni Brand S -Moc 82.4% 
Safened is applied in tank mixture or sequentially with other registered corn herbicides, the following 
applications may be made: 
1. Apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened + the labeled rate of atrazine or 
simazine preplant incorporated, followed by 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% 
Safened preemergence. Make the preemergence application during or after planting, but 
before weeds and corn emerge. 
2. Apply Omni Brand S-Moc 82.4% Safened at 1.33 pts./A alone or in tank mix combination with 
the labeled rate of atrazine, or simazine, preplant incorporated. Do not exceed the total rate 
of triazine herbicide labeled in combination with Omni Brand S-Moc 82.4% Safened for corn 
grown on a given soil texture. Follow with a post-directed application of ametryn at the 
labeled rate. Refer to the ametryn label for specific directions for the post-directed 
application. 
3. Apply EPTC or butylate formulation at labeled rates preplant incorporated, followed by a 
preemergence application of Omni Brand S-Moc 82.4% Safened at 1.0-1.33 pts./A. Do not 
use EPTC on soils where rapid degradation has been shown to occur. Make the 
preemergence application during or after planting, but before weeds and corn emerge. 
Note: When following the application regimes in numbers 1-3 above, a shallow cultivation may be needed 
after the preemergence or postemergence application to help control any late emerging shattercane or 
wild proso millet plants. 
Restriction 
• DO NOT apply more than 2.0 pts ./A (1.9 lbs . ai) of Omni Brand S -Moc 82.4% Safened in the 
preplant incorporated plus preemergence application on soils with less than 6% organic matter , 
or crop injury may result. 
Table 3: Omni Brand S-Moc 82.4% Safened + atrazine or simazine, or Omni Brand 
S-Moc 82.4% Safened + atrazine + simazine, Preplant Incorporated or 
Preemergence – Corn (All Types) 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of atrazine and/or 
simazine. Broadcast Rate per Acre

Omni Brand S-Moc 82.4% Safened master label 27 
 
Soil Texture Less than 3% Organic Matter 3% Organic Matter or Greater 
COARSE 0.8-1.0 pts. 1.0 pt. 
 
MEDIUM 1.0-1.33 pts. 
 
1.33 pts. 
 
FINE 1.33 pts. 1.33-1.67 pts. 
Use simazine rather than atrazine when heavy infestations of crabgrass or fall panicum are expected. On 
soils having between 6% and 20% organic matter, apply Omni Brand S-Moc 82.4% Safened up to 2.33 
pts./A in tank mix combination with atrazine. Refer to the atrazine label for weeds controlled. 
When using the tank mixture of Omni Brand S-Moc 82.4% Safened + atrazine + simazine, use equal rates 
of each as labeled when heavy broadleaf weed infestations are expected. When heavy infestations of 
crabgrass or fall panicum are expected, use a 1:2 ratio of atrazine + simazine. 
For cocklebur, yellow nutsedge, and velvetleaf control on fine-textured soils above 3% organic matter, 
apply the labeled rate atrazine, or the same total amount of atrazine + simazine with 1.33-1.67 pts./A of 
Omni Brand S-Moc 82.4% Safened. 
TANK MIXTURE WITH ATRAZINE - POSTEMERGENCE 
Weeds Controlled 
barnyardgrass (watergrass) foxtail, yellow prickly sida 
cocklebur* jimsonweed purslane 
crabgrass kochia ragweed 
crowfootgrass lambsquarters smartweed 
fall panicum morningglory* velvetleaf 
foxtail, giant mustard yellow nutsedge 
foxtail, green pigweed 
 
*partial control 
 
 
Apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + labeled rate of atrazine on coarse soils, 1.33 
pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of atrazine on medium soils, or 1.33-1.67 
pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of atrazine on fine soils. Apply this tank 
mixture before grass and broadleaf weeds pass the 2-leaf stage and before corn exceeds 5 inches in 
height. Application to weeds larger than the 2-leaf stage will generally result in unsatisfactory control. 
Lay-by: Apply to corn plants no taller than 12 inches. Direct applications to corn taller tha n 5 inches to the 
base of the corn plants. Applications to corn plants less than 5 inches tall may be made over the top. 
Occasionally, some corn leaf burn may occur, but this should not affect later growth or yield. Do not apply 
this postemergence tank mixture in fluid fertilizer, or severe crop injury may occur. 
For better control of cocklebur, morningglory, velvetleaf, and yellow nutsedge on fine-textured soils above 
3% organic matter, apply the labeled rate of atrazine, with 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% 
Safened. 
Tank mixtures of Omni Brand S-Moc 82.4% Safened + atrazine may be applied following use of any 
registered preplant surface-applied, preplant incorporated, or preemergence corn herbicide, including 
Omni Brand S-Moc 82.4% Safened + atrazine. 
Restriction 
• DO NOT apply more than 3.9 pts./A (3.77 lbs. ai) of Omni Brand S-Moc 82.4% Safened, or more 
than the labeled rate of atrazine ai/A during any one year. Refer to the atrazine label for 
geographic, soil-texture, and rotational restrictions. 
TANK MIXTURE WITH DICAMBA + ATRAZINE 
Preemergence: Use this tank mixture only on field corn which is flat-planted (no furrows) in CO, IA, IL, 
IN, KS, MN, NE, OH, SD, and WI.

Omni Brand S-Moc 82.4% Safened master label 28 
 
In addition to the weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + dicamba + atrazine, applied preemergence, also controls lambsquarters, ragweed, and 
smartweed and will provide partial control of cocklebur, jimsonweed, morningglory, and velvetleaf. 
Apply Omni Brand S-Moc 82.4% Safened + dicamba + atrazine preemergence. Broadcast labeled rate of 
dicamba + atrazine with 1.33 pts./A of Omni Brand S-Moc 82.4% Safened on medium soils, or with 1.33-
1.67 pts./A of Omni Brand S-Moc 82.4% Safened on fine soils. Apply this tank mixture to the soil surface 
at planting or after planting, but before corn emerges. Plant corn at least 1.5 inches deep and apply 
behind planting equipment, avoiding incorporation by the planter wheel or other seed covering device. 
Do not incorporate before corn emergence. If it is necessary to rotary hoe to break the soil crust, do not 
disturb the soil more than 1/2 inch deep. 
Precautions 
Avoid drift to sensitive nontarget plants, such as soybeans, during application, or injury may occur. 
Restrictions 
• DO NOT apply with aircraft. 
• DO NOT apply on coarse soils or on soils with less than 2.5% organic matter. 
 
Postemergence for Control of Pigweed (Mid-Atlantic states, including DE, MD, PA, VA, and WV): Apply 
1.0-1.5 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of dicamba + atrazine or dicamba by ground 
equipment when pigweed plants are less than 3 inches tall and before corn is taller than 5 inches in a minimum 
of 20 gals. of spray per acre. Use the lower rate on coarse-textured and low organic matter soils. Use the higher 
rate on fine-textured and high organic matter soils. Precautions 
Avoid drift to sensitive non-target plants, such as soybeans, during application, or injury may occur. 
Restrictions 
• DO NOT apply with aircraft. 
TANK MIXTURE WITH ATRAZINE OR SIMAZINE + PENDIMETHALIN FOR 
PROLONGED CONTROL OF LAMBSQUARTERS AND PIGWEED IN FIELD CORN 
ONLY (NORTHEAST U.S., INCLUDING MI, IN, KY, AND STATES EAST OF THESE) 
For prolonged control of lambsquarters and pigweed, in addition to a broad spectrum of annua l broadleaf 
and grass weeds, Omni Brand S-Moc 82.4% Safened in tank mix combination with atrazine* or simazine 
+ pendimethalin may be applied after planting, but before corn or weeds emerge. Apply by ground 
equipment in a minimum of 10 gals. of water or 20 gals. of liquid fertilizer. Apply by air in a minimum of 
5.0 gals. of water. Refer to Table 3 of this label for rates of Omni Brand S-Moc 82.4% Safened. Apply 
tank mix partners as specified on their labels. 
* DO NOT apply Omni Brand S-Moc 82.4% Safened in tank mix combination with atrazine 80W + 
pendimethalin, as this combination is not compatible. Other atrazine formulations may be used. 
Mixing Instructions: See Comment No. 1 following Table 2. 
Observe all directions for use, restrictions, and limitations on the respective product labels when applying 
these products in tank mix combination. Refer to the pendimethalin label for replanting instructions in the 
event of crop loss. 
TANK MIXTURE WITH ATRAZINE OR SIMAZINE, OR ATRAZINE + SIMAZINE WITH 
PARAQUAT, GLYPHOSATE + 2,4-D, OR GLUFOSINATE FOR MINIMUM-TILLAGE 
OR NO-TILLAGE SYSTEMS 
In minimum-tillage or no-tillage systems where corn is planted directly into a cover crop, stale seedbed, 
established sod, or previous crop residues, the contact herbicides paraquat, glyphosate + 2,4-D, or 
glyphosate should be tank mixed with Omni Brand S-Moc 82.4% Safened + atrazine, Omni Brand S-Moc 
82.4% Safened + simazine, or Omni Brand S-Moc 82.4% Safened + atrazine + simazine. See Comment 
No. 7 following Table 2. The Omni Brand S-Moc 82.4% Safened, Omni Brand S-Moc 82.4% Safened + 
atrazine or simazine, or Omni Brand S-Moc 82.4% Safened + atrazine + simazine portion of the tank 
mixture provides preemergence control of the weeds listed on this label in the tank mixture secti on for 
Omni Brand S-Moc 82.4% Safened, Omni Brand S-Moc 82.4% Safened + atrazine or simazine, or

Omni Brand S-Moc 82.4% Safened master label 29 
 
Omni Brand S-Moc 82.4% Safened + atrazine + simazine – Preplant Surface, Preplant 
Incorporated, or Preemergence. 
Application: Apply before, during, or after planting, but before the corn emerges. Add paraquat, 
glyphosate + 2,4-D, or glyphosate and apply as directed on the product label. 
Paraquat: Apply as directed on the product label. This treatment will not control weeds taller than 6 
inches. 
Restrictions: Do not apply combinations containing paraquat in suspension-type liquid fertilizers, as the 
activity of paraquat will be reduced. 
Glyphosate + 2,4-D: See the label for weeds controlled, rates for specific weeds, and other information 
concerning use. 
Glyphosate: See the glyphosate label for weeds controlled, rates, and other use directions. 
Apply in 20-60 gals. of water or fluid fertilizer per acre with ground equipment. 
Use simazine in preference to atrazine when heavy infestations of crabgrass or fall panicum are 
expected. 
When using the tank mixture of Omni Brand S-Moc 82.4% Safened + atrazine + simazine, use equal rates 
of atrazine and simazine as shown when heavy broadleaf weed infestations are expected. When heavy 
infestations of crabgrass or fall panicum are expected, use a 1:2 ratio of atrazine + simazine instead of 
the 1:1 ratio given. Refer to Comment No. 2 following Table 2 for atrazine 4L and simazine 4L 
conversions. 
For cocklebur, yellow nutsedge, and velvetleaf control on fine-textured soils above 3% organic matter, 
apply the labeled rate of atrazine , or the same total amount of atrazine + simazine, with 1.33- 1.67 pts./A 
of Omni Brand S-Moc 82.4% Safened. 
TANK MIXTURE WITH ATRAZINE; OR ATRAZINE + 2,4-D; OR ATRAZINE + 2,4-D + 
DICAMBA + ATRAZINE FOR MINIMUM-TILLAGE OR NO-TILLAGE SYSTEMS 
In minimum-tillage or no-tillage systems where corn is planted directly into a cover crop, stale seedbed, 
established sod, or previous crop residues, Omni Brand S-Moc 82.4% Safened applied in combination 
with atrazine will kill most emerged small annual weeds. Apply Omni Brand S-Moc 82.4% Safened + 
labeled rate of atrazine before, during, or after planting, but before corn emerges, according to the rates in 
Table 3. 
Where heavy crop residues exist, add labeled 3.8 lbs. ai/gal of 2,4-D amine (such as Weedar 64, Weedar 
64A, DMA-4 Herbicide, Weedone
® 638 or Formula 40) to the spray tank last and apply in a minimum of 
25 gals. of carrier per acre. 
As carriers, nitrogen solutions and complete liquid fertilizers, applied before corn emergence, enhance 
burndown of existing weeds, and therefore, are recommended instead of water. Add X -77 surfactant at 
1.0-2.0 qts./100 gals. of diluted spray, or another appropriate surfactant at its labeled rate, or add crop oil 
concentrate plus 28% liquid nitrogen (or equivalent). Apply before weeds are taller than 3 inches. If alfalfa 
is present, add dicamba + atrazine to the spray mixture at labeled rates and apply before alfalfa is taller 
than 6 inches. 
For fields with existing sod grasses (e.g., bromegrass, orchardgrass, rye, or timothy), when existing 
weeds exceed 3 inches in height or when very dry conditions exist, add paraquat at the rate indicated on 
the product label in place of or in addition to 2,4-D, as indicated above. Do not apply paraquat in 
suspension-type liquid fertilizer. Observe all directions for use, restrictions, and limitations on the 
respective product labels when applying these products in tank mix combination. 
TANK MIXTURE WITH ATRAZINE + DICAMBA IN CONSERVATION TILLAGE - 
FIELD AND SILAGE CORN 
In conservation tillage systems where corn is planted directly into a cover crop or previous crop residue, 
Omni Brand S-Moc 82.4% Safened + atrazine + dicamba will kill most emerged small annual weeds. 
Apply Omni Brand S-Moc 82.4% Safened + atrazine + dicamba before, during, or after planting, but 
before corn emergence on medium and fine soils with greater than 2.5% organic matter. For fields with 
existing vegetation taller than 3 inches or when very dry conditions exist, add paraquat at its standard

Omni Brand S-Moc 82.4% Safened master label 30 
 
rate. Omni Brand S-Moc 82.4% Safened + atrazine + dicamba may be applied postemergence to corn 
shorter than 3 inches and before weedy grasses exceed the 2-leaf stage. 
As carriers, nitrogen solutions and complete liquid fertilizers, applied before corn emergence, enhance 
burndown of existing weeds. Do not apply paraquat in suspension-type liquid fertilizer or use on emerged 
corn. 
Refer to the atrazine + dicamba label and follow all directions, limitations, restrictions, an d information 
regarding application and use in corn. 
TANK MIXTURE WITH ISOXAFLUTOLE - FIELD CORN ONLY 
Omni Brand S-Moc 82.4% Safened and isoxaflutole have a complementary response and weed control 
profile which allows various tank mix rate combinations to be considered. The addition of isoxaflutole will 
improve the control of certain problem weeds, including Texas panicum, woolly cupgrass, and wild proso 
millet. Omni Brand S-Moc 82.4% Safened improves both the duration and spectrum of annual grass and 
small-seeded broadleaf weed control, in particular foxtails (yellow foxtail), witchgrass, and yellow 
nutsedge. 
To reduce the risk of an adverse crop response, the isoxaflutole label does not allow applications to 
coarse-textured soils with less than 1.5% organic matter and warns about applications to all soils with less 
than 1.5% organic matter or with pH greater than 7.5, as well as applications made to areas in fields with 
clay knolls, eroded hillsides, and exposed subsoil. Omni Brand S-Moc 82.4% Safened has no adverse 
crop response warnings or use restrictions. 
Select a rate option for Omni Brand S-Moc 82.4% Safened plus isoxaflutole by weighing the intensity of 
problem weed pressure (population presence and density) and your acceptance for risk of an adverse 
crop response. For example, where Texas panicum, woolly cupgrass, or wild proso millet is a primary 
target weed, use a tank-mix combination with a higher isoxaflutole rate for the given soil type. 
Where the acceptance of an adverse crop response risk is low and/or a more general weed spectrum is 
targeted (especially yellow foxtail, witchgrass, or yellow nutsedge), use a tank -mix combination with a 
higher Omni Brand S-Moc 82.4% Safened rate for the given soil type. Where a target weed is listed as 
controlled on both product labels, a tank-mix combination option including intermediate rates of both 
products may be used. Where a target weed is listed as controlled on only one product label, do not apply 
a rate of that product below what is labeled for that weed on the individual product label, or unacceptable 
control may result. Follow all other directions for use, rate limitations, precautions, and restrictions on both 
the Omni Brand S-Moc 82.4% Safened and isoxaflutole product labels. 
Do not use isoxaflutole on coarse-textured soils with less than 1.5% organic matter. 
TANK MIXTURES FOR POSTEMERGENCE SALVAGE WEED CONTROL IN FIELD 
CORN ONLY 
For postemergence control of weeds in specific types of field corn, the Omni Brand S-Moc 82.4% Safened 
combinations listed below may be used. Full season weed control from early preplant, preplant 
incorporated, or preemergence treatments can lead to maximum yield potential under competition- free 
conditions. However, if control of emerged weeds is needed, a postemergenc e program listed below can 
be applied to provide residual control for the remainder of the season. 
Follow all label directions, instructions, restrictions, and limitations for each product used. For each tank 
mixture with Omni Brand S-Moc 82.4% Safened, apply only to the specific field corn type specified on the 
tank mix product label. 
Restrictions 
 • DO NOT use fluid fertilizer with these mixtures or corn injury may occur. 
 
Precautions 
• In-row weed control may be reduced because of lack of coverage when applied to corn over 4 
inches tall.

Omni Brand S-Moc 82.4% Safened master label 31 
 
Omni Brand S-Moc 82.4% Safened + Glufosinate Products Registered for 
Postemergence Use in Glufosinate-Tolerant Corn 
These tank mixtures can be applied postemergence to weeds and corn from seed designated as c orn 
warranted as being tolerant to glufosinate. Products containing glufosinate are used to provide 
postemergence control of a broad spectrum of grass and broadleaf weeds while the Omni Brand S -Moc 
82.4% Safened provides residual control of grasses and certain broadleaf weeds listed in the label 
section Omni Brand S-Moc 82.4% Safened Applied Alone - Weeds Controlled. Refer to section 
Omni Brand S-Moc 82.4% Safened Alone - Preplant Incorporated or Preemergence and use the 
minimum rate per soil texture and organic matter classification for season-long residual control. Refer to 
the label of the glufosinate tank mix product for the postemergence application rates according to weed 
species and their maximum height at the time of postemergence application. Where multiple weed 
species are present, use the highest labeled rate to control the species and growth stages present. 
Follow all applicable use directions, limitations, restrictions, and precautions regarding application to corn 
on the Omni Brand S-Moc 82.4% Safened and tank mix product labels. Where difficult species and/or 
severe weed populations are expected, use the maximum rate where rate ranges are listed. 
Omni Brand S-Moc 82.4% Safened + Glyphosate for Postemergence Application 
to Glyphosate-Tolerant Corn 
The tank mixture of Omni Brand S-Moc 82.4% Safened + glyphosate can be applied postemergence to 
weeds and to corn designated as glyphosate-tolerant. Application may be applied postemergence to 
glyphosate-tolerant corn from emergence until corn reaches 30 inches tall or the V8 stage (8 leaves with 
collars), whichever comes first. This mixture will provide postemergence control of weed speci es on the 
glyphosate label and residual control of weed species on the Omni Brand S-Moc 82.4% Safened label. 
Use the minimum Omni Brand S-Moc 82.4% Safened rate postemergence with glyphosate in glyphosate-
tolerant corn as specified in the Corn – Omni Brand S-Moc 82.4% Safened Alone – Preplant 
Incorporated or Preemergence section of this label according to soil texture and organic matter. Refer 
to the glyphosate label and follow appropriate use directions, application procedures, precautions, and 
limitations. Refer to the glyphosate label for directions for control of problem species. Where difficult 
species and/or severe weed populations are expected, use the maximum rate where rate ranges are 
listed. 
Omni Brand S-Moc 82.4% Safened + Glyphosate + Atrazine for Postemergence 
Application to Glyphosate-Tolerant Corn 
The tank mixture of Omni Brand S-Moc 82.4% Safened + atrazine + glyphosate can be applied 
postemergence to weeds and to corn designated as glyphosate-tolerant. Application may be applied 
postemergence to glyphosate-tolerant corn from emergence up to 12 inches in height. This mixture will 
provide postemergence control of weed species on the glyphosate label and residual control of weed 
species on the Omni Brand S-Moc 82.4% Safened + atrazine label. Use the minimum Omni Brand S-Moc 
82.4% Safened + atrazine rate postemergence with glyphosate in glyphosate-tolerant corn as specified 
in the Corn - Omni Brand S-Moc 82.4% Safened Combinations – Tank Mixture With atrazine or 
simazine, or atrazine + simazine – Preplant Incorporated or Preemergence section and Table 3 of 
this label according to soil texture and organic matter. 
Follow all applicable use directions, limitations, precautions, and information regarding application to corn 
on the Omni Brand S-Moc 82.4% Safened, atrazine, and glyphosate labels for application to glyphosate-
tolerant corn. Where difficult species and/or severe weed populations are expected, use the maximum 
rate where rate ranges are listed. 
COTTON – Omni Brand S-Moc 82.4% Safened ALONE 
Application: Apply Omni Brand S-Moc 82.4% Safened postemergence to cotton and preemergence to 
weeds at 0.5-1.33 pts./A, according to the state limitations in the following Postemergence section. 
AR, KS, LA, MS, TN, and Bootheel of MO - Apply preemergence only at 0.5-1.0 pts./A on sandy loams, 
0.66-1.33 pts./A on medium soils, or 1.0-1.33 pts./A on fine soils. 
NM, OK, and TX - Apply preplant incorporated or preemergence at 1.0 pt./A on sandy loams, 1.0-1.33 
pts./A on medium soils, or 1.33 pts./A on fine soils.

Omni Brand S-Moc 82.4% Safened master label 32 
 
Fall Application for glyphosate-resistant Italian Ryegrass Control: Apply Omni Brand S-Moc 82.4% 
Safened for residual control at 1.33-1.67 pts./A in the fall (September 1 - December 1) after harvest of the 
previous crop and before Italian ryegrass emergence. Use the lower rate for coarse- textured soils and the 
higher rate for fine-textured soils. A tillage operation may precede the application. Do not incorporate 
deeper than 2-3 inches if tillage follows the application of Omni Brand S-Moc 82.4% Safened. For fall 
applications after emergence of glyphosate-resistant Italian ryegrass, paraquat can be tank mixed with 
Omni Brand S-Moc 82.4% Safened to control emerged ryegrass. Refer to the paraquat brands label for 
specific rates, application instructions, and restrictions. Other registered herbicides may be tank mixed 
with Omni Brand S-Moc 82.4% Safened for control or improved control of other weeds present at the time 
of application. 
Restrictions 
• DO NOT apply to frozen ground. 
• DO NOT apply more than the seasonal maximum for cotton (2.6 pts/A, depending on soil texture) 
through any combination of applications. 
• DO NOT apply more than a total of 2.0 pts./A (1.9 lbs ai) on coarse soils or 2.6 pts./A (2.5 lbs ai) 
of Omni Brand S-Moc 82.4% Safened on medium and fine soils per year. 
• DO NOT graze or feed forage or fodder from cotton to livestock, or illegal residues may result. 
• DO NOT apply Omni Brand S-Moc 82.4% Safened on sand or loamy sand soils, or in areas 
where water is likely to “pond” over the bed. 
• DO NOT apply on Taloka silt loam. 
• DO NOT use in Gaines County, TX 
 
Preplant Incorporated (NM, OK, and TX Only): Apply to the soil and incorporate into the top inch of soil 
immediately before planting, at planting, or after planting, but before crop or weeds emerge. Use a rolling 
cultivator or similar implement to uniformly incorporate not more than 1 inch deep. Use a preplant 
incorporated application if furrow irrigation is used or when a period of dry weather after application is 
expected. Where furrow irrigation is used, wet the top of the bed for best results. If the crop is to be 
planted on beds, apply and incorporate after bed formation. Plant cotton below the zone of incorporation; 
i.e., at least 1 inch on fine soils and 1.5 inches on coarse and medium soils. If incorporated prior to 
planting, use a planter that will result in the least soil disturbance. 
Note: For best control of yellow nutsedge and suppression of seedling johnsongrass, apply Omni Brand 
S-Moc 82.4% Safened pre-plant incorporated at the maximum rate for the soil texture, whether applied 
alone or mixed with prometryn. 
Preemergence: Apply to the soil surface at planting or after planting, but before weeds or crop emerge. 
Postemergence: Apply Omni Brand S-Moc 82.4% Safened broadcast over the top or directed to the soil 
surface according to the rate limitations listed below by state. Over-the-top postemergence application 
may be made not later than 100 days before harvest, and directed-postemergence application may be 
made not later than 80 days before harvest. Application before weeds emerge or after clean cultivation to 
remove existing weeds is necessary since Omni Brand S-Moc 82.4% Safened will not control emerged 
weeds. Omni Brand S-Moc 82.4% Safened postemergence may be applied over any previous registered 
herbicide treatment. In sprinkler-irrigated areas, sprinkler irrigate after application with 1/2-1 inch of water 
(1/2 inch on coarse-textured soils to 1 inch on fine-textured soils) to incorporate Omni Brand S-Moc 
82.4% Safened. In furrow-irrigated areas, apply Omni Brand S-Moc 82.4% Safened, incorporate with a 
rolling cultivator or similar implement that provides uniform shallow incorporation (2 inches or less), and 
then irrigate. In non-irrigated areas, if at least 1/2 inch of rainfall does not occur within 10 days after 
application, cultivate with a rolling cultivator or similar implement that provides uniform shallow 
incorporation of Omni Brand S-Moc 82.4% Safened. 
VA, NC, SC, GA, FL, and AL: Apply postemergence at 1.0-1.33 pts./A. 
TN, AR, KS, MS, MO, and LA: Apply postemergence at 0.5-1.33 pts./A. 
TX, OK, NM, AZ, CA, and Clay Soils in AR: Apply postemergence at 1.0-1.33 pts./A before August 1. 
Multiple Applications: Apply as a preplant incorporated or preemergence treatment and follow with an 
application postemergence to cotton before weeds emerge or after clean cultivation to remov e existing 
weeds, since Omni Brand S-Moc 82.4% Safened will not control emerged weeds. Apply Omni Brand S-

Omni Brand S-Moc 82.4% Safened master label 33 
 
Moc 82.4% Safened postemergence over a previous preplant or preemergence Omni Brand S-Moc 
82.4% Safened application as shown in the following table. 
 
 
State 
Multiple Omni Brand S-Moc 82.4% Safened Applications to 
Cotton 
Preplant Incorporated or 
Preemergence (Pt./A) + Postemergence (Pt./A) 
MS, LA, TN, AR, KS, MO 0.5-1.33 (Preemergence Only) + 0.5-1.33 
TX, OK, NM 1.0-1.33 + 1.0-1.33 before August 1 
NC, VA 1.0-1.33 (Preemergence Only) + 1.0-1.33 
 
In sprinkler-irrigated areas, sprinkler irrigate after application with 1/2-1 inch of water (1/2 inch on coarse-
textured soils to 1 inch on fine-textured soils) to incorporate Omni Brand S-Moc 82.4% Safened. In 
furrow-irrigated areas, apply Omni Brand S-Moc 82.4% Safened, incorporate with a rolling cultivator or 
similar implement that provides uniform shallow incorporation (2 inches or less), and then irrigate. In non-
irrigated areas, if at least 1/2 inch of rainfall does not occur within 10 days after application, cultivate with 
a rolling cultivator or similar implement that provides uniform shallow incorporation of Omni Brand S -Moc 
82.4% Safened. 
For best control of yellow nutsedge and suppression of seedling johnsongrass, apply Omni Brand S-Moc 
82.4% Safened preplant incorporated, preemergence, or postemergence to cotton and preemergence to 
weeds at the maximum rate for the soil texture, whether applied alone or in combinations. These 
treatments may be applied over previous registered herbicide treatments. 
Precautions 
• To avoid crop injury, DO NOT apply over the top in fluid fertilizer or any other adjuvant, surfactant, oil, 
or other pesticide not specified in the cotton section of this label. 
• To avoid concentration in the seed furrow, DO NOT make broadcast applications of Omni Brand S-
Moc 82.4% Safened to cotton planted in furrows more than 2 inches deep. Band applications may be 
made to cotton planted in furrows deeper than 2 inches, but band width must not exceed the width of 
the bottom of the furrow. 
• In furrow-planted cotton, to avoid concentration in the furrow and potential injury, DO NOT apply 
Omni Brand S-Moc 82.4% Safened postemergence until after first “knifing” or cultivation to level soil 
surface. 
 
COTTON – Omni Brand S-Moc 82.4% Safened COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
TANK MIXTURE WITH PROMETRYN 
Apply Omni Brand S-Moc 82.4% Safened tank mixtures with prometryn preplant incorporated or 
preemergence in water or fluid fertilizer. When fluid fertilizer is used as a carrier for Omni Brand S -Moc 
82.4% Safened, either alone or in combination with prometryn, mix only the amount that will be sprayed in 
one operation. These mixtures should not be allowed to stand without agitation. Only use water as a 
carrier for postemergence-directed application. 
In addition to those weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + prometryn, applied preplant incorporated or preemergence, controls the following 
weeds: junglerice, wild oats, annual morningglory, groundcherry, hairy nightshade, lambsquarters, malva, 
mustard, prickly sida (teaweed), purslane, ragweed, and shallow-germinating seedlings of cocklebur and

Omni Brand S-Moc 82.4% Safened master label 34 
 
coffeeweed. As a postemergence-directed application, prometryn provides postemergence control and 
residual control of weeds on its label, while Omni Brand S-Moc 82.4% Safened provides residual control 
of weed species on its label. Omni Brand S-Moc 82.4% Safened will not control emerged weeds. 
Preplant Incorporated or Preemergence: Apply Omni Brand S-Moc 82.4% Safened + prometryn, either 
preplant incorporated or preemergence, using the labeled rate of prometryn with the indicated rate of 
Omni Brand S-Moc 82.4% Safened from the table below. Plant cotton below the zone of incorporation; 
i.e., at least 1.0 inch on fine soils and 1.5 inches on coarse and medium soils. If incorporated before 
planting, use a planter that will cause the least soil disturbance. 
Omni Brand S-Moc 82.4% Safened + Prometryn – Cotton (NM, OK, TX) 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of prometryn. 
Broadcast Rate per Acre 
Area Soil Texture Rate 
ALL Sand, loamy sand DO NOT USE 
OK, and Blacklands and Gulf 
Coast of TX 
Rio Grande Valley of TX 
Loams 
Clays 
0.8-1.33 pts. 
1.33 pts. 
NM; High Plains, Rolling Plains, 
Edwards Plateau of TX; and 
Southwest TX 
Sandy loam 
Loams 
Sandy clay loams, other clay 
soils 
0.8-1.0 pt. 
0.8-1.33 pts. 
1.33 pts. 
 
Postemergence Directed (AR, AZ, CA, LA, MS, NM, OK, TN, TX, and MO): Tank mix Omni Brand S-
Moc 82.4% Safened with prometryn in water and apply postemergence directed in cotton for control of 
emerged weeds listed on the prometryn label and residual preemergence control of weeds controlled by 
Omni Brand S-Moc 82.4% Safened and prometryn, or application may be made after cultivation for 
residual preemergence control. These treatments may be applied over previous registered treatments, 
including Omni Brand S-Moc 82.4% Safened, provided the maximum label rate of any product is not 
exceeded. DO NOT apply over the top of cotton or injury may occur. 
Apply Omni Brand S-Moc 82.4% Safened + prometryn in a minimum of 20 gals. of spray volume per acre. 
Follow the directions, restrictions, and precautions on the prometryn label when prometryn is applied as a 
postemergence-directed application. Refer to the directions, restrictions, and precautions for use of Omni 
Brand S-Moc 82.4% Safened under the Cotton – Omni Brand S-Moc 82.4% Safened Alone – 
Postemergence section. 
Refer to the prometryn label for further instructions, restrictions, and limitations. 
Precautions 
To avoid concentration in the seed furrow, do not make broadcast applications of Omni Brand S-Moc 
82.4% Safened + prometryn to cotton planted in furrows more than 2 inches deep. Band applications may 
be made to cotton planted in furrows deeper than 2 inches, but band width should not exceed the width of 
the bottom of the furrow. 
Restrictions 
• DO NOT apply on sand or loamy sand soils, or in areas where water is likely to “pond” over the 
bed. 
• DO NOT apply in cut areas of newly leveled fields, or in areas of excess salt. 
• DO NOT apply to glandless cotton varieties. 
• DO NOT graze or feed forage or fodder from cotton to livestock, or illegal residues may result. 
• DO NOT apply on Taloka silt loam. 
• DO NOT use in Gaines County, TX.

Omni Brand S-Moc 82.4% Safened master label 35 
 
TANK MIXTURE WITH FLUOMETURON 
Apply Omni Brand S-Moc 82.4% Safened in tank mixture with fluometuron preemergence for control of 
those weeds controlled by Omni Brand S-Moc 82.4% Safened alone and those as listed on the 
fluometuron label. This combination will also control spotted spurge, hyssop spurge, nodding spurge, and 
prostrate spurge. Apply to the soil surface at planting or after planting, but before weeds or crop emerge, 
using the appropriate rates from the table below. Apply the tank mixture postemergence to cotton but 
preemergence to weeds, or apply postemergence to both cotton and broadleaf weeds for control of 
weeds on the fluometuron label. Apply as a directed, semi-directed, or over-the-top spray. Omni Brand S-
Moc 82.4% Safened will not control emerged weeds but will provide preemergence control of species on 
its label. Where rate ranges are given for fluometuron, use the higher rate when applying postemergence 
to weeds that are 2 inches or less. These treatments may be applied over previous registered treatments, 
including Omni Brand S-Moc 82.4% Safened, provided the maximum label rate of any product is not 
exceeded. 
Mixing Instructions: Incompatibility may occur when tank mixing Omni Brand S-Moc 82.4% Safened and 
fluometuron. To help overcome this condition, fill the spray tank 1/4 full with water or fluid fertilizer and 
start agitation, add the fluometuron and allow it to become dispersed. Add X-77 at 0.5% volume/volume 
final spray (4.0 pts./100 gals.), then add the Omni Brand S-Moc 82.4% Safened and finally the rest of the 
water or fluid fertilizer. Agitate during mixing and application to maintain a uniform suspension. DO NOT 
use fluid fertilizer as a carrier for postemergence applications. 
Apply labeled rates of fluometuron with the rates of Omni Brand S-Moc 82.4% Safened below. 
Omni Brand S-Moc 82.4% Safened + Fluometuron – Cotton 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of fluometuron. 
Broadcast Rate per Acre 
Soil Texture Area 1: AR, LA, MS, Bootheel 
of MO and TN 
Area 2: Eastern OK, Gulf 
Coast, RioGrande Valley, 
Eastern TX 
Sand, loamy sand DO NOT USE DO NOT USE 
Sandy loam 0.5-1.0 0.8-1.0 
Loam, silt loam, silt 0.66-1.33 1.0-1.33 
Fine soil 1.0-1.33 1.33 
 
Refer to the fluometuron labels for further instructions, restrictions, and limitations. 
Precautions 
• To avoid crop injury, do not apply Omni Brand S-Moc 82.4% Safened + fluometuron on sand or 
loamy sand soils, or in areas where water is likely to “pond” over the bed. DO NOT use on Taloka 
silt loam. 
• To avoid concentration in the seed furrow, do not make broadcast applications of Omni Brand S-
Moc 82.4% Safened + fluometuron to cotton planted in furrows more than 2 inches deep. Band 
applications may be made to cotton planted in furrows deeper than 2 inches, but band width 
should not exceed the width of the bottom of the furrow. 
• The use of fluometuron following the use of a systemic insecticide at planting may result in crop 
injury. 
 
Restrictions 
• DO NOT feed treated forage or gin trash to livestock, or graze treated areas. 
• DO NOT use in Gaines County, TX.

Omni Brand S-Moc 82.4% Safened master label 36 
 
TANK MIXTURE OF Omni Brand S-Moc 82.4% Safened OR Omni Brand S-Moc 
82.4% Safened + FLUOMETURON WITH PARAQUAT, OR GLYPHOSATE FOR 
MINIMUM-TILLAGE OR NO-TILLAGE SYSTEMS 
In minimum-tillage or no-tillage systems where cotton is planted directly into a cover crop, stale seedbed, 
or previous crop residues, the contact herbicides paraquat, or glyphosate may be added to a tank mix of 
either Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened + fluometuron. When 
used as directed, the paraquat portion of the tank mixture controls most emerged weeds and suppresses 
many perennial weeds. Glyphosate combinations will control emerged annual and perennial weeds when 
applied as directed on the glyphosate label. The Omni Brand S-Moc 82.4% Safened and Omni Brand S-
Moc 82.4% Safened + fluometuron portion of the tank mixture provides preemergence control of the 
weeds listed on this label in the Omni Brand S-Moc 82.4% Safened and Omni Brand S-Moc 82.4% 
Safened + fluometuron sections, respectively. 
Refer to the label of each product used in combination and observe the planting details, information 
regarding application, geographical restrictions, and all other precautions and limitations. Refer to Mixing 
Instructions under Tank Mixture with fluometuron section. 
Application: Apply before, during, or after planting, but before the cotton emerges. Apply the labeled rate 
of fluometuron with Omni Brand S-Moc 82.4% Safened at 0.8-1.0 pt./A on sandy loams, medium-, and 
fine-textured soils. 
Apply in 20-60 gals. of water or fluid fertilizer per acre with ground equipment. 
Paraquat: Apply as directed on the product label. This treatment will not control weeds taller than 6 
inches. 
Glyphosate: See the glyphosate label for weeds controlled, rates, and other use directions. 
Precautions 
• If heavy rain occurs soon after application, crop injury may result, especially in poorly drained 
areas where water stands for several days, or where the seeding slit has not been properly 
closed. 
• Refer to the fluometuron labels and the Tank Mixture with fluometuron section of this label for 
further instructions, precautions, and limitations. 
 
Restrictions 
• DO NOT apply combinations containing paraquat in suspension-type liquid fertilizers, as the 
activity of paraquat will be reduced. 
• DO NOT apply Omni Brand S-Moc 82.4% Safened + fluometuron + glyphosate in tank mixture 
because of compatibility problems. 
• DO NOT use in Gaines County, TX. 
TANK MIXTURE WITH MSMA, MSMA + PROMETRYN, OR MSMA + 
FLUOMETURON 
Tank mix Omni Brand S-Moc 82.4% Safened with MSMA in water and applied postemergence directed 
for control of emerged weeds listed on the MSMA product label and residual preemergence control of 
weeds controlled by Omni Brand S-Moc 82.4% Safened. The addition of prometryn or fluometuron will 
add control of weed species on their respective labels. 
Postemergence Directed (AL, AR, AZ, CA, FL, GA, LA, MS, NC, NM, OK, SC, TN, TX, VA, and 
Bootheel of MO): Apply Omni Brand S-Moc 82.4% Safened + MSMA postemergence directed to cotton 
at least 3 inches tall according to the directions, limitations, and precautions on the MSMA product label, 
as well as the directions, limitations, and precautions for use of Omni Brand S-Moc 82.4% Safened in the 
section for Cotton – Omni Brand S-Moc 82.4% Safened Alone – Postemergence. Do not apply after 
first cotton bloom. These treatments may be applied over previous registered treatments, including Omni 
Brand S-Moc 82.4% Safened, provided the maximum label rate of any product is not exceeded. 
Fluometuron or prometryn may be added to the Omni Brand S-Moc 82.4% Safened + MSMA tank mixture 
according to the respective label directions for application to cotton at least 3 inches tall. When these 
mixtures are used, follow the mixing instructions for Omni Brand S-Moc 82.4% Safened + prometryn or 
fluometuron and then add the MSMA product.

Omni Brand S-Moc 82.4% Safened master label 37 
 
Restriction 
• DO NOT use Omni Brand S-Moc 82.4% Safened in tank mix with premixes of MSMA plus 
herbicides other than those registered for use in tank mixture with Omni Brand S-Moc 82.4% 
Safened on cotton. 
TANK MIXTURE WITH TRIFLURALIN FOR POST-DIRECTED FOLLOWED BY SOIL 
INCORPORATION APPLICATIONS 
Apply Omni Brand S-Moc 82.4% Safened as a tank mixture with trifluralin in cotton for improved late-
season weed control when used as an incorporated lay-by type application. This combination may be 
applied after the cotton is at least 3 inches tall and has reached the 4 true-leaf stage. Direct the 
application to the soil surface and away from the crop foliage. Incorporate using a sweep or rolling type 
cultivator to provide uniform and shallow mixing into the top 2 inches of soil. Refer to each product label 
for the appropriate application rates by soil type and for this application timing, and follow all product use 
limitations and restrictions. 
TANK MIXTURE WITH GLYPHOSATE FOR USE ON GLYPHOSATE-TOLERANT 
COTTON ONLY 
Apply Omni Brand S-Moc 82.4% Safened as a tank mixture with glyphosate in water postemergence 
over-the-top or postemergence directed for control of emerged weeds listed on the glyphosate labels and 
for residual preemergence control of weeds listed on the Omni Brand S-Moc 82.4% Safened label. See 
the Cotton – Omni Brand S-Moc 82.4% Safened Alone – Postemergence section of this label for rates 
and timings of Omni Brand S-Moc 82.4% Safened and follow the glyphosate label for their respective 
rates, application methods, and application timing restrictions. Do not add additional spray adjuvants, 
surfactants, fertilizer additives, or pesticides to this tank mixture if applied postemergence over -the-top or 
unacceptable injury may occur. Refer to the glyphosate label and follow appropriate use directions, 
application procedures, precautions, and limitations. 
 
Precautions 
Postemergence over-the-top applications of this tank mixture may cause temporary injury in the form of 
necrotic spotting to exposed cotton leaves, which will not affect normal plant development. 
Restrictions 
• DO NOT apply this tank mixture postemergence to any cotton variety unless it is designated 
glyphosate-tolerant and unless the glyphosate formulation being used is registered for 
postemergence use in glyphosate-tolerant cotton. 
• DO NOT apply glyphosate postemergence over-the-top to cotton past the growth stage limit 
specified on their respective labels. 
• DO NOT use on sand or loamy sand soils in Gaines County, TX. 
SOYBEAN, IMMATURE SEED 
Apply Omni Brand S-Moc 82.4% Safened preplant or preemergence for the control or suppression of 
grass and small-seeded weeds in immature-seed soybean or other food-grade soybeans. For specific 
rates, see the rate table listed below. 
Preplant Surface-Applied: For minimum-tillage or no-tillage systems only, apply Omni Brand S-Moc 
82.4% Safened alone up to 45 days before planting. Use only split applications for treatments made 30-
45 days before planting, with 2/3 the labeled broadcast rate for the crop and soil texture applied initially 
and the remaining 1/3 applied at planting. Treatments less than 30 days before planting may be made 
either as a split or a single application. If weeds are present at the time of treatment, apply in a tank 
mixture combination with a contact herbicide (e.g., paraquat, or glyphosate). Observe directions for use, 
precautions, and restrictions on the label of the contact herbicide. To the extent possible, do not move 
treated soil out of the row or move untreated soil to the surface during planting, or weed control will be 
diminished. 
 
Preplant Incorporated: Apply Omni Brand S-Moc 82.4% Safened to the soil and incorporate into the top 
2 inches of soil within 14 days before planting, using a finishing disk, harrow, rolling cultivator, or similar

Omni Brand S-Moc 82.4% Safened master label 38 
 
implement capable of providing uniform 2-inch incorporation. Use a preplant incorporated application if 
furrow irrigation is used or when a period of dry weather after application is expected. If crop will be 
planted on beds, apply and incorporate Omni Brand S-Moc 82.4% Safened after bed formation, unless 
specified otherwise. 
Preemergence: Apply Omni Brand S-Moc 82.4% Safened during planting (behind the planter) or after 
planting, but before weeds emerge. 
Omni Brand S-Moc 82.4% Safened Broadcast Rates Per Acre 
 
Soil Texture 
Percent Organic Matter in Soil 
<3% ≥3% 
Coarse 1-1.33 pts. 1.33 pts. 
Medium 1.33-1.67 pts. 1.33-1.67 pts. 
Fine 1.33-1.67 pts. 1.67-2.0 pts. 
 
Omni Brand S-Moc 82.4% Safened will not control emerged weeds. 
Restrictions 
• DO NOT cut for hay within 120 days following an Omni Brand S-Moc 82.4% Safened application. 
• DO NOT use for forage within 60 days following an Omni Brand S-Moc 82.4% Safened 
application. 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened during any 
one year. 
GRASSES GROWN FOR SEED (ID, OR, WA) – Omni Brand S-Moc 82.4% Safened 
APPLIED ALONE 
To control weeds and volunteer grasses in established grasses grown for seed, apply Omni Brand S -Moc 
82.4% Safened to established stands of tall fescue, orchardgrass, perennial ryegrass, fine fescue, 
bentgrass, and Kentucky bluegrass just before, during, or immediately following the first fall rains or just 
before or during a late summer or early fall irrigation, but before target grasses emerge. The seed crop 
must have had one seed harvest or been established at least one year. The post -harvest residue (straw) 
should be evenly spread, removed, or burned before applying Omni Brand S-Moc 82.4% Safened. 
Rainfall or irrigation is required after application and before weed emergence for best control. Omni Brand 
S-Moc 82.4% Safened will provide preemergence control/suppression of volunteer seedlings of perennial 
ryegrass, fine fescue species, tall fescue, orchardgrass, bentgrass, and Kentucky bluegrass. Omni Brand 
S-Moc 82.4% Safened will control those weed species listed in the Omni Brand S-Moc 82.4% Safened 
Alone section of the Omni Brand S-Moc 82.4% Safened label and will suppress or control rattail fescue, 
annual bluegrass, Italian ryegrass, California brome, downy brome, and roughstalk bluegrass. 
Apply Omni Brand S-Moc 82.4% Safened by ground equipment in a minimum of 10 gallons of water per 
acre using the rate listed below according to grass species. 
 
Established Grass Crop Grown for Seed Pt./A 
Fine fescue species 1.0 
Perennial ryegrass 1.0 
Bentgrass 1.0-1.33 
Kentucky bluegrass 1.0-1.33 
Orchardgrass 1.0-1.33

Omni Brand S-Moc 82.4% Safened master label 39 
 
Tall fescue 1.0-1.33 
 
Precautions 
• Tank mixtures with other pesticides, or the addition of an adjuvant, can increase the risk of crop 
injury. Application to perennial ryegrass and fine fescue stands under stress may cause crop 
injury. 
• If weed escapes occur following an Omni Brand S-Moc 82.4% Safened application, an 
application of a postemergence herbicide may be necessary to control escapes. When making 
such an application, follow all directions, precautions, and limitations on the label of the 
postemergence herbicide. 
• Control may be decreased if excessive straw from the previous harvest is present at application 
and/or insufficient rainfall/irrigation occurs. 
 
Restrictions 
• Apply Omni Brand S-Moc 82.4% Safened only once per year. 
• DO NOT graze forage regrowth for 60 days following application west of the Cascades. 
• In areas east of the Cascades, DO NOT graze forage regrowth for 150 days following application. 
• Hay may be harvested anytime between seed harvest and the next application of S -metolachlor. 
• DO NOT apply after the November 15 or poor control may result. 
HORSERADISH 
Apply a single application of Omni Brand S-Moc 82.4% Safened at a broadcast rate of 1.0-1.33 pts./A to 
the soil surface after planting, but before weed or crop emergence (i.e., preemergence). Use lower rates 
on soils relatively coarse-textured and higher rates on fine-textured soils. A band application may also be 
used, applying proportionally less spray mixture on the area actually treated. Omni Brand S -Moc 82.4% 
Safened will not control emerged weeds. Control emerged weeds with an appropriate registered foliar 
herbicide or by mechanical means. 
Restrictions 
• Apply Omni Brand S-Moc 82.4% Safened only once per year. 
• DO NOT apply more than 1.33 pts./A (1.3 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
PEANUTS – Omni Brand S-Moc 82.4% Safened ALONE 
Apply Omni Brand S-Moc 82.4% Safened, either preplant incorporated, postplant incorporated, or 
preemergence, using the appropriate rate specified below. 
Preplant Incorporated or Preemergence: Follow instructions for use of Omni Brand S-Moc 82.4% 
Safened alone under Application Procedures. 
Postplant Incorporated: Apply and shallowly incorporate Omni Brand S-Moc 82.4% Safened into the soil 
after planting, but before peanut germination. Incorporation depth and incorporating implements must be 
kept above the seed, or seed will be damaged. 
Apply Omni Brand S-Moc 82.4% Safened alone, preplant incorporated, postplant incorporated, or 
preemergence, at a broadcast rate of 1.0-1.33 pts./A in the Southeast* and 0.8-1.33 pts./A in NM, OK, 
and TX. 
*In the Southeast, use 1.33-2.0 pts./A and apply preemergence for partial control of Florida beggarweed. 
Omni Brand S-Moc 82.4% Safened alone may be applied as directed after any of the following preplant 
incorporated herbicides when used according to their labels: benefin; trifluralin; ethafluralin; imazethapyr; 
or pendimethalin. 
Restrictions 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT graze or feed peanut forage or fodder to livestock for 30 days following application. 
• Pre-Harvest Interval (PHI): DO NOT apply within 90 days of harvest.

Omni Brand S-Moc 82.4% Safened master label 40 
 
PEANUTS – Omni Brand S-Moc 82.4% Safened COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
TANK MIXTURE WITH BENEFIN 
Omni Brand S-Moc 82.4% Safened + benefin tank mixture applied preplant incorporated controls those 
weeds listed under Omni Brand S-Moc 82.4% Safened Applied Alone and those weeds as listed on the 
benefin label. 
Apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of benefin in a minimum of 10 
gals. of spray volume per acre for ground application or in a minimum of 5.0 gals. of spray volume per 
acre for aerial application. Follow the procedures for benefin on the benefin label for soil preparation and 
incorporation of this tank mix. Apply and incorporate Omni Brand S-Moc 82.4% Safened + benefin up to 
14 days prior to planting. 
Follow all restrictions and precautions on the benefin label. 
TANK MIXTURE OR SEQUENTIALLY WITH IMAZETHAPYR 
The tank mixture or sequential treatment of Omni Brand S-Moc 82.4% Safened and imazethapyr controls 
all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by imazethapyr alone. Refer to the 
Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds controlled by Omni Brand S-Moc 
82.4% Safened and to the imazethapyr label for weeds controlled by imazethapyr. 
Refer to the respective labels for application methods, timing, rates, restrictions, and precautions; and use 
in accordance with the more restrictive label. Do not exceed the label rate of either product. Omni Brand 
S-Moc 82.4% Safened will not control emerged weeds. 
TANK MIXTURE WITH ETHAFLURALIN 
The tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
ethafluralin alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds 
controlled by Omni Brand S-Moc 82.4% Safened and to the ethafluralin label for weeds controlled by 
ethafluralin. 
Apply Omni Brand S-Moc 82.4% Safened + ethafluralin preplant incorporated, using the appropriate rate 
from the table below. Follow labeled soil preparation procedures for ethafluralin. 
Omni Brand S-Moc 82.4% Safened + Ethafluralin – Peanuts 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of ethafluralin. 
Broadcast Rate per Acre 
Soil Texture Southeast NM, OK, TX 
COARSE 1.0-1.33 pts. 0.8-1.33 pts. 
MEDIUM 1.0-1.33 pts. 0.8-1.33 pts. 
FINE 1.0-1.33 pts. 0.8-1.33 pts. 
 
TANK MIXTURE WITH PENDIMETHALIN 
Omni Brand S-Moc 82.4% Safened + pendimethalin applied preplant incorporated controls all weeds 
controlled by Omni Brand S-Moc 82.4% Safened alone plus Texas panicum, field sandbur, johnsongrass 
from seed, lambsquarters, kochia, annual spurge, and other species on the pendimethalin label. Apply 
Omni Brand S-Moc 82.4% Safened + pendimethalin by ground or by aerial equipment within 14 days 
before planting. Incorporate into the top 1-2 inches of soil before planting and within 7 days of application, 
using a finishing disk or similar implement capable of providing uniform incorporation. If peanuts will be 
planted on beds, apply and incorporate after bed formation. Refer to the Incorporation instructions of the 
respective labels for additional directions.

Omni Brand S-Moc 82.4% Safened master label 41 
 
Apply Omni Brand S-Moc 82.4% Safened + pendimethalin preplant incorporated, using the appropriate 
rates from the table below. 
Omni Brand S-Moc 82.4% Safened + Pendimethalin – Peanuts 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of pendimethalin. 
Broadcast Rate per Acre 
Soil Texture NM, OK, TX Other Peanut Growing States 
Sand, loamy sand 0.8 pts. 1.0-1.33 pts. 
Sandy loam 0.8-1.0 pts. 1.0-1.33 pts. 
Fine soil 1.33 pts. 1.33 pts. 
 
TANK MIXTURE WITH PARAQUAT 
Omni Brand S-Moc 82.4% Safened + paraquat applied at ground cracking will control or suppress small 
(1- to 6-inch) emerged annual grass and broadleaf weeds and provide residual control of weed species 
listed in the Omni Brand S-Moc 82.4% Safened Applied Alone section of this label. Apply paraquat plus 
the appropriate Omni Brand S-Moc 82.4% Safened rate from the Peanuts – Omni Brand S-Moc 82.4% 
Safened Alone section in a minimum spray volume of 20 gals./A with ground equipment. Refer to the 
paraquat label and follow all directions, limitations, and restrictions. 
TANK MIXTURE WITH PARAQUAT + BENTAZON 
The addition of bentazon to the Omni Brand S-Moc 82.4% Safened + paraquat mixture will result in 
improved control of such problem broadleaf weeds as prickly sida, cocklebur, smartweed, and bristly 
starbur. Omni Brand S-Moc 82.4% Safened + paraquat + bentazon applied at ground cracking will control 
or suppress small (1- to 6-inch) emerged annual grass and broadleaf weeds and provide residual control 
of weed species listed in the Omni Brand S-Moc 82.4% Safened Applied Alone section of this label. 
Apply bentazon + paraquat with the appropriate Omni Brand S-Moc 82.4% Safened rate from the 
Peanuts – Omni Brand S-Moc 82.4% Safened Alone section in a minimum spray volume of 20 gals./A 
with ground equipment. Refer to the paraquat and bentazon labels and follow all directions, limitations, 
and restrictions. 
TANK MIXTURE WITH PARAQUAT + 2,4-DB 
The addition of 2,4-DB to the Omni Brand S-Moc 82.4% Safened + paraquat mixture will result in 
improved control of such problem broadleaf weeds as sicklepod, morning glory, and cocklebur. Omni 
Brand S-Moc 82.4% Safened + paraquat + 2,4-DB applied at ground cracking will control or suppress 
small (1- to 6-inch) emerged annual grass and broadleaf weeds and provide residual control of weed 
species listed in the Omni Brand S-Moc 82.4% Safened Applied Alone section of this label. Apply 
paraquat + 2,4-DB with the appropriated Omni Brand S-Moc 82.4% Safened rate from the Omni Brand 
S-Moc 82.4% Safened Alone section in a minimum spray volume of 20 gals./A with ground equipment. 
Refer to the Gramoxone brands and 2,4-DB labels and follow all directions, limitations, and restrictions for 
each product. 
TANK MIXTURE WITH BENTAZON 
Omni Brand S-Moc 82.4% Safened + bentazon applied at ground cracking will control species on the 
bentazon label and provide residual control of species listed in the Omni Brand S -Moc 82.4% Safened 
Applied Alone section of this label. Apply labeled rate of bentazon in 20 gals./A, depending on weed 
species and stage of growth as specified on the bentazon label, with the appropriate Omni Brand S -Moc 
82.4% Safened rate from the Peanuts – Omni Brand S-Moc 82.4% Safened Alone section. A second 
bentazon application may be made in all peanut-growing areas, if needed. Refer to the respective labels 
and follow all directions, limitations, and restrictions for each product. 
TANK MIXTURE WITH BENTAZON + BUTYRAC 200 
Omni Brand S-Moc 82.4% Safened + bentazon + 2,4-DB applied at ground cracking will control species 
on their labels, especially morning glories. Apply labeled rates of bentazon and 2,4- DB in 20 gals./A,

Omni Brand S-Moc 82.4% Safened master label 42 
 
depending on weed species and stage of growth as specified on the bentazon label, with the appropriate 
Omni Brand S-Moc 82.4% Safened rate from the Peanuts – Omni Brand S-Moc 82.4% Safened Alone 
section. A second bentazon + 2,4-DB application may be made in all peanut-growing areas, if needed. 
Refer to the respective labels and follow all directions, limitations, and restrictions for each product. 
SEQUENTIALLY WITH ACIFLUORFEN + BENTAZON 
Apply Omni Brand S-Moc 82.4% Safened according to the directions for Omni Brand S-Moc 82.4% 
Safened Alone and follow with a postemergence treatment of acifluorfen + bentazon as specified on its 
label for the control of weeds listed on the Omni Brand S-Moc 82.4% Safened label and on the acifluorfen 
+ bentazon label. Refer to the Omni Brand S-Moc 82.4% Safened – Peanuts – Alone section and to the 
acifluorfen + bentazon label and follow all directions, limitations, and restrictions for each product. 
MULTIPLE APPLICATIONS 
Where weed pressure is heavy or where species difficult to control are expected, Omni Brand S-Moc 
82.4% Safened is most effective when used as follows: Southeast Only (AL, FL, GA, NC, SC, VA) 
Preplant Incorporated: Apply Omni Brand S-Moc 82.4% Safened preplant incorporated as directed 
under Peanuts – Omni Brand S-Moc 82.4% Safened Alone or apply Omni Brand S-Moc 82.4% 
Safened + benefin preplant incorporated as directed previously in this section. Refer to the respective 
section for weeds controlled. 
OR 
Preemergence to before “ground cracking”: Apply Omni Brand S-Moc 82.4% Safened any time from 
preemergence to before “ground cracking” at 1.0-2.0 pts./A for extended control of weeds not yet 
emerged. DO NOT use Omni Brand S-Moc 82.4% Safened If peanuts have emerged, use Dual 
Magnum® according to its label: Peanuts – Combinations – Multiple Applications. 
Follow the PPI or PRE application by: 
Lay-by: DO NOT use Omni Brand S-Moc 82.4% Safened. Apply Dual Magnum at lay-by as directed 
under the Peanuts – Alone section of the Dual Magnum label. 
Southwest Only (NM, OK, TX) 
1st Application: Apply Omni Brand S-Moc 82.4% Safened preplant incorporated or preemergence to 
before “ground cracking” as directed under Peanuts – Omni Brand S-Moc 82.4% Safened Alone or 
apply Omni Brand S-Moc 82.4% Safened + benefin preplant incorporated as directed previously in this 
section. DO NOT use Omni Brand S-Moc 82.4% Safened after peanut emergence. If peanuts have 
emerged, use Dual Magnum according to its label. 
2nd Application: DO NOT use Omni Brand S-Moc 82.4% Safened. Apply s-metolachlor at lay-by as 
directed under the Peanuts – Alone section of the s-metolachlor label. Use only when late germinating 
weeds are expected to be a problem. Refer to the product Applied Alone section for a list of weeds 
controlled. 
Restrictions 
• DO NOT apply more than the equivalent of 2.67 lbs. of active ingredient of Omni Brand S -Moc 
82.4% Safened per acre during any one year. If s-metolachlor is used as a sequential treatment, 
the lbs. of active ingredient (1.0 pt. = 0.95 lb.) plus the lbs. of active ingredient of Omni Brand S -
Moc 82.4% Safened must not exceed 2.67 lbs. 
• DO NOT use Omni Brand S-Moc 82.4% Safened or other s-metolachlor products after 
peanuts have emerged. 
• DO NOT graze or feed peanut forage or fodder to livestock for 30 days following application. 
• Pre-Harvest Interval (PHI): DO NOT apply within 90 days of harvest. 
BEANS, PEAS, AND LENTILS – Omni Brand S-Moc 82.4% Safened ALONE 
For use on beans, peas, and lentils, including garbanzo, great northern beans, kidney beans, lima beans, 
mung beans, navy beans, peas (English*; southern peas, including blackeye, pinkeye, crowder, etc .), 
pinto beans, snap beans (green, wax, string), lentils, and lupines (sweet, white, white sweet, and grain).

Omni Brand S-Moc 82.4% Safened master label 43 
 
Fall Application: 
1. Apply after September 30 in ND, SD, MN, WI, and north of Route 30 in IA. 
2. Apply after October 15 north of Route 91 in NE and south of Route 30 in IA. 
3. Apply after October 31 north of Route 136 in IL. 
In all locations, apply to crop stubble after harvest when the sustained soil temperature at a 4- inch depth 
is less than 55°F and falling. In minimum-till or no-tillage systems on soils having greater than 2.5% 
organic matter, use 1.67-2.0 pts./A on medium-textured and 2.0 pts./A on fine-textured soils. A tillage 
operation may precede the application. A fall and/or a spring tillage may follow application, but do not 
incorporate deeper than 2-3 inches. Minimize furrow and ridge formation in the tillage operations. 
Restrictions 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT apply to frozen ground. 
• If a spring application is made, the total rate of the fall plus spring applications must not exceed 
the maximum total rate for beans, peas, and lentils. 
Spring Application: 
Apply Omni Brand S-Moc 82.4% Safened, either preplant incorporated or preemergence, using the 
appropriate rate specified below. Preplant Incorporated or Preemergence: Follow instructions for use 
of Omni Brand S-Moc 82.4% Safened alone under Application Procedures. On coarse soils with less 
than 3% organic matter, apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened or 1.33 pts./A if 
organic matter is 3% or greater. On medium soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% 
Safened. On fine soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened if organic matter 
content is less than 3%, or 1.67-2.0 pts./A if organic matter content is 3% or greater. 
* On English peas, use only preemergence applications. If soils are cold and wet during pea germination 
and emergence, the use of Omni Brand S-Moc 82.4% Safened may delay maturity and/or reduce yields. 
Restrictions 
• DO NOT cut for hay within 120 days following an Omni Brand S-Moc 82.4% Safened application. 
• DO NOT use for forage within 60 days following an Omni Brand S-Moc 82.4% Safened 
application. 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
BEANS, PEAS, AND LENTILS – Omni Brand S-Moc 82.4% Safened 
COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
 
Restrictions 
• When applying Omni Brand S-Moc 82.4% Safened in combination on beans, peas, and lentils, 
DO NOT cut for hay within 120 days following application. 
TANK MIXTURE AND SEQUENTIAL APPLICATIONS WITH EPTC – BEANS (GREEN 
OR DRY) 
This mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by EPTC 
alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section of this label for weeds 
controlled by Omni Brand S-Moc 82.4% Safened alone and to the EPTC label for weeds controlled by 
EPTC. 
Preplant Incorporated: Follow instructions for use of Omni Brand S-Moc 82.4% Safened alone under 
Application Procedures. Sequential: Apply EPTC alone preplant incorporated, as specified on that 
label. Follow with a preemergence application of Omni Brand S-Moc 82.4% Safened, at rates specified for

Omni Brand S-Moc 82.4% Safened master label 44 
 
Omni Brand S-Moc 82.4% Safened alone, during planting (behind the planter) or after planting, but before 
the weeds or crop emerge. 
Refer to the Product Information section of this label and to the EPTC label for weather, cultural 
practices, and all other precautions and limitations that affect performance of these products. 
Apply the labeled rate of EPTC with Omni Brand S-Moc 82.4% Safened as specified. On coarse soils, 
apply 0.8 pt./A of Omni Brand S-Moc 82.4% Safened if organic matter content is less than 3%, or 1.0 
pt./A if organic matter content is 3% or greater. On medium soils, apply 1.0 pt./A of Omni Brand S-Moc 
82.4% Safened if organic matter content is less than 3%, or 1.33 pts./A if organic matter content is 3% or 
greater. On fine soils, apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened if organic matter is less 
than 3%, or 1.33-1.67 pts./A if organic matter is 3% or greater. 
*Refer to the EPTC label for rate limitations depending on geographical area, limitations and restrictions, 
and species and varietal restrictions. 
TANK MIXTURE WITH TRIFLURALIN – BEANS (DRY – KIDNEY, NAVY, PINTO, 
ETC.; LIMA; AND SNAP) 
Omni Brand S-Moc 82.4% Safened + trifluralin tank mix applied preplant incorporated controls those 
weeds listed under Omni Brand S-Moc 82.4% Safened Applied Alone and those weeds listed for 
trifluralin alone on the trifluralin label. Omni Brand S-Moc 82.4% Safened + trifluralin may be applied by 
ground or by aerial equipment and incorporated up to 14 days prior to planting. Follow the procedures on 
this label and on the respective trifluralin label using equipment that provides uniform 2- inch incorporation. 
Apply Omni Brand S-Moc 82.4% Safened + trifluralin tank mix using the appropriate Omni Brand S-Moc 
82.4% Safened rate specified for Omni Brand S-Moc 82.4% Safened alone, and the labeled trifluralin rate 
from the Dry Beans, and the Lima and Snap Beans sections of the respective trifluralin label. Choose the 
product rate for the specific soil texture/organic matter classification and weed species expected. 
POTATOES – Omni Brand S-Moc 82.4% Safened ALONE 
Apply Omni Brand S-Moc 82.4% Safened, either incorporated, preemergence, or post emergence to 
potatoes after hilling/lay-by, according to directions specified below for control of weeds listed under the 
Product Information section. Within a rate range, use the lower rate on soils relatively coarse-textured or 
low in organic matter; use the higher rate on soils relatively fine-textured or high in organic matter. 
Effectiveness will be reduced if later cultural practices expose untreated soil. For application by center 
pivot irrigation, see the Center Pivot Irrigation Application section of this label. 
Incorporated: Apply Omni Brand S-Moc 82.4% Safened at 1.0-2.0 pts./A to the soil and incorporate into 
the top 3 inches before planting, using a finishing disk, harrow, rolling cultivator, or similar implement. 
Planting and later cultural practices should not bring untreated soil to the surface. Post plant incorporated 
application may be made any time after planting to drag-off, but before potato emergence. Use an 
implement that evenly distributes Omni Brand S-Moc 82.4% Safened in the top 2 inches of soil. Do not 
damage potato seed pieces or sprouts with incorporation equipment. 
Preemergence: Apply Omni Brand S-Moc 82.4% Safened at 1.0-2.0 pts./A, either after planting as a 
preemergence, delayed preemergence, after drag-off or hilling treatment, but before weeds emerge. Up 
to 2.5 pts./A of Omni Brand S-Moc 82.4% Safened alone may be used where soil organic matter is 
between 6% and 20%. 
Post emergence After Hilling/Lay-by: Apply 1.67 pts./A of Omni Brand S-Moc 82.4% Safened post 
emergence to potatoes through after hilling/at lay-by to control Omni Brand S-Moc 82.4% Safened -
sensitive species for remainder of the growing season. This application will not control emerged weeds. It 
may be applied over a previous Omni Brand S-Moc 82.4% Safened application, but do not apply more 
than 3.6 pts./A (3.4 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
Precautions 
If cool, wet soil conditions occur after application, Omni Brand S-Moc 82.4% Safened may delay maturity 
and/or reduce yield of Superior and other early maturing potato varieties. These directions for use do not 
apply to sweet potatoes or yams. 
Restrictions 
• DO NOT apply more than 3.6 pts./A (3.4 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT use on muck or peat soils.

Omni Brand S-Moc 82.4% Safened master label 45 
 
• DO NOT apply both as a preemergence and an incorporated treatment. 
• Pre-Harvest Interval (PHI): DO NOT harvest potatoes within 40 days after a lay-by application, or 
within 60 days after the at-planting to drag-off application. 
POTATOES – Omni Brand S-Moc 82.4% Safened COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary s tatements of 
each product in the tank mixture. 
 
TANK MIXTURE WITH METRIBUZIN 
In addition to those weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened applied in tank mix combination with, or sequentially with, any of the registered metribuzin 
formulations also controls the following broadleaf weeds: hairy, hemp sesbania, lambsquarters, prickly 
sida, ragweed, smartweed, velvetleaf, Venice mallow, and wild mustard; and will provide partial control of 
cocklebur, nightshade, and jimsonweed. 
Apply Omni Brand S-Moc 82.4% Safened at 1.0-2.0 pts./A plus the labeled metribuzin use rate 
preemergence or post emergence to potatoes through after last hilling. Apply 1.0-1.33 pts./A of Omni 
Brand S-Moc 82.4% Safened on coarse soils and 1.33-2.0 pts./A on other soil textures. Within this rate 
range, use the lower rate on soils relatively coarse-textured or low in organic matter; use the higher rate 
on soils relatively fine-textured or high in organic matter. Effectiveness will be reduced if later cultural 
practices expose untreated soil. Omni Brand S-Moc 82.4% Safened will not control emerged weeds. 
Refer to the metribuzin label for precautionary statements, restrictions, application information, center 
pivot irrigation application, weeds controlled, and varietal limitations. 
Precautions 
• Make post emergence applications to potatoes, except center pivot, only as a directed or semi-
directed spray to avoid chlorosis, minor necrosis, or leaf distortion. 
• These directions for use do not apply to sweet potatoes or yams. 
 
Restrictions 
• Pre-Harvest Interval (PHI): DO NOT harvest potatoes treated with Omni Brand S-Moc 82.4% 
Safened in tank mixture with metribuzin within 60 days after application. 
• Pre-Harvest Interval (PHI): Potatoes may not be harvested within 40 days after a lay-by 
application of Omni Brand S-Moc 82.4% Safened. 
• DO NOT use this tank mixture on muck or peat soils. 
Omni Brand S-Moc 82.4% Safened + LINURON TANK MIXTURE (EAST OF ROCKY 
MOUNTAINS) 
Apply Omni Brand S-Moc 82.4% Safened in a tank mix combination with any of the registered linuron 
formulations as a preemergence broadcast application to potatoes. Apply to the soil surface after planting 
and before emergence of the crop or after final drag-off according to the rates appropriate to soil texture. 
Refer to the Product Information section of this label and to the linuron label for precautionary 
statements, restrictions, application information, and weeds controlled. 
Precautions 
• To avoid crop injury, do not use on sands or loamy sands. 
• To avoid crop injury, do not incorporate or spray over the top of emerged potatoes. 
TANK MIXTURE WITH PENDIMETHALIN 
In addition to the weeds controlled by Omni Brand S-Moc 82.4% Safened alone, this tank mixture with 
pendimethalin controls such problem species as kochia, lambsquarters, purslane, annual spurge, stinging 
nettle, and others specified on the pendimethalin label. Apply Omni Brand S-Moc 82.4% Safened +

Omni Brand S-Moc 82.4% Safened master label 46 
 
pendimethalin preemergence, preemergence incorporated, or early post emergence, according to the 
specific directions on the pendimethalin label, using the rates appropriate to soil texture. 
Refer to the Omni Brand S-Moc 82.4% Safened and pendimethalin labels and observe all directions, 
timings, limitations, precautions, and restrictions concerning the use of these products on potatoes and 
follow the most restrictive. 
TANK MIXTURE WITH PENDIMETHALIN + EPTC 
In addition to the weeds controlled by Omni Brand S-Moc 82.4% Safened alone, this tank mixture will 
control those species on the pendimethalin and EPTC labels. Refer to the Omni Brand S-Moc 82.4% 
Safened + pendimethalin labels for rates of those products, depending on geographical area. Refer to the 
respective Omni Brand S-Moc 82.4% Safened, pendimethalin, and EPTC labels and observe all 
directions, limitations, precautions, and restrictions concerning the use of these products on potatoes and 
follow the most restrictive. 
PUMPKIN – Omni Brand S-Moc 82.4% Safened ALONE 
Preemergence 
Apply Omni Brand S-Moc 82.4% Safened preemergence (before the weeds have emerged) at 1.0 to 1.33 
pts./A as an inter-row or inter-hill application in pumpkin. Leave 1 foot of untreated area over the row, or 6 
inches to each side of the planted hill and/or any emerged pumpkin foliage (inter -row or inter-hill means 
not directly over the planted seed or young pumpkin plants). Use the lower Omni Brand S -Moc 82.4% 
Safened rate on soils light in texture (loamy sand or lighter) and low in soil organic matter (less than 3%). 
Omni Brand S-Moc 82.4% Safened applied as a broadcast spray over the planted row or hill, or 
applications made directly to crop foliage, will increase the risk of injury (e.g., stand loss, delayed 
maturity, and loss of yield) to the pumpkin crop. 
Because Omni Brand S-Moc 82.4% Safened will not control emerged weeds, it must be applied before 
the weeds emerge. Weeds that are present should be controlled by another means, e.g., by mechanical 
means or using another herbicide. 
Restriction 
• DO NOT apply more than 1.33 pts./A (1.3 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• Pre-Harvest Interval (PHI): DO NOT apply within 30 days before pumpkin harvest . 
RHUBARB – Omni Brand S-Moc 82.4% Safened ALONE 
Apply Omni Brand S-Moc 82.4% Safened at a broadcast rate of 0.67-1.33 pts./A to the soil surface in 
early spring, prior to crop emergence. Use lower rates on soils relatively coarse-textured and higher rates 
on fine-textured soils. A band application may also be used, applying proportionally less spray mixture on 
the area actually treated. Omni Brand S-Moc 82.4% Safened will not control emerged weeds. Control 
emerged weeds with an appropriate registered foliar herbicide or by mechanical or physical means. 
Restrictions 
• DO NOT apply more than once per year. 
• DO NOT apply more than 1.33 pts./A (1.3 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• Pre-Harvest Interval (PHI): DO NOT harvest rhubarb within 62 days of the Omni Brand S -Moc 
82.4% Safened application. 
SAFFLOWER – Omni Brand S-Moc 82.4% Safened ALONE 
Preplant Incorporated or Preemergence: Follow instructions for use of Omni Brand S-Moc 82.4% 
Safened alone under Application Procedures. 
On coarse soils, apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened if organic matter content is 
less than 3%, or 1.33 pts./A if organic matter is 3% or greater. On medium soils, apply 1.33-1.67 pts./A of 
Omni Brand S-Moc 82.4% Safened. On fine soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% 
Safened if organic matter content is less than 3%, or 1.67-2.0 pts./A if organic matter content is 3% or 
greater. 
Restrictions 
 • DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year.

Omni Brand S-Moc 82.4% Safened master label 47 
 
GRAIN OR FORAGE SORGHUM (SEED TREATED WITH SAFENER) – Omni Brand 
S-Moc 82.4% Safened ALONE 
Apply Omni Brand S-Moc 82.4% Safened, either preplant surface, preplant incorporated, preemergence, 
or post emergence using the appropriate rate specified below. Apply Omni Brand S-Moc 82.4% Safened 
alone only when the sorghum seed has been properly treated with a seed treatment appropriate for s -
metolachlor. Preplant or preemergence applications of Omni Brand S-Moc 82.4% Safened to sorghum 
not treated with an appropriate seed treatment will result in crop death. 
 
Restrictions 
• DO NOT apply more than 1.67 pts./A (1.6 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT apply Omni Brand S-Moc 82.4% Safened to frozen ground. 
• If a spring application is made, DO NOT apply Omni Brand S-Moc 82.4% Safened or any other 
product containing S-metolachlor the following spring to grain or forage sorghum. 
• Except for the split preplant surface treatment, do not make more than one application per year. 
• Pre-Harvest Interval (PHI): DO NOT apply Omni Brand S-Moc 82.4% Safened post emergence 
within 75 days of harvest. 
 
Fall Application for Italian Ryegrass Control: Apply Omni Brand S-Moc 82.4% Safened for residual 
control of glyphosate-resistant Italian ryegrass (Lolium multiflorum) using 1.33-1.67 pts./A in the fall 
(September 1 - December 1) after harvest of the previous crop and before Italian ryegrass emergence. 
Use the lower rate for coarse-textured soils and the higher rate for fine-textured soils. A tillage operation 
may precede the application. Do not incorporate deeper than 2-3 inches if tillage follows the application of 
Omni Brand S-Moc 82.4% Safened. For fall applications after emergence of glyphosate-resistant Italian 
ryegrass, Gramoxone brands can be tank mixed with Omni Brand S-Moc 82.4% Safened to control 
emerged ryegrass. Refer to the paraquat label for specific rates, application instructions, and restrictions. 
Other registered herbicides may be tank mixed with Omni Brand S-Moc 82.4% Safened for control or 
improved control of other weeds present at the time of application. 
Preplant Surface-Applied: Refer to instructions for use of Omni Brand S-Moc 82.4% Safened under 
Application Procedures section on this label. For minimum-tillage or no-tillage systems only, apply Omni 
Brand S-Moc 82.4% Safened up to 45 days before planting in CO, IA, IL, KS, MO, NE, and SD. Use only 
split applications for treatments made 30-45 days prior to planting, with 2/3 of the broadcast rate applied 
initially and the remaining 1/3 at planting. Apply 1.5 pts./A of Omni Brand S-Moc 82.4% Safened on 
medium soils or 1.67 pts./A on fine soils. Treatments less than 30 days prior to planting may be made 
either as a split or single application. Apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened on coarse 
soils not more than 2 weeks prior to planting. Under dry conditions, irrigation after application is 
necessary to move Omni Brand S-Moc 82.4% Safened into the soil. 
Preplant Incorporated or Preemergence: Refer to instructions for use of Omni Brand S-Moc 82.4% 
Safened under Application Procedures section on this label. Broadcast 1.0-1.33 pts./A of Omni Brand 
S-Moc 82.4% Safened on coarse soils, 1.33-1.5 pts./A on medium soils, or 1.33-1.67 pts./A on fine soils. 
Post emergence: Refer to instructions for use of Omni Brand S-Moc 82.4% Safened under Application 
Procedures section on this label. Omni Brand S-Moc 82.4% Safened may be applied broadcast post 
emergence at 1.0-1.33 pts./A on coarse soils, 1.33-1.5 pts./A on medium soils, or 1.33-1.67 pts./A on fine 
soils. Omni Brand S-Moc 82.4% Safened will not control emerged weeds. Therefore, emerged weeds 
must be controlled by cultural or chemical means. When applied alone, Omni Brand S-Moc 82.4% 
Safened will be safe to emerged sorghum. The risk of sorghum injury increases when adjuvants (e.g., 
non-ionic, crop oil), nitrogen sources (e.g., AMS, UAN), or fertilizers are applied with Omni Brand S-Moc 
82.4% Safened. 
Precautions 
• If sorghum seed is not properly treated with a seed treatment appropriate for s -metolachlor, 
preplant and preemergence applications of Omni Brand S-Moc 82.4% Safened will severely 
injure the crop. 
• Under high soil moisture conditions prior to sorghum emergence, injury may occur following 
preplant and preemergence application of Omni Brand S-Moc 82.4% Safened. The crop will 
normally outgrow this effect. 
• Application of Omni Brand S-Moc 82.4% Safened on sorghum grown under dry mulch tillage may 
result in crop injury.

Omni Brand S-Moc 82.4% Safened master label 48 
 
 
GRAIN OR FORAGE SORGHUM (SEED TREATED WITH SAFENER) – Omni Brand 
S-Moc 82.4% Safened TANK MIXTURES 
Apply Omni Brand S-Moc 82.4% Safened preplant or preemergence (prior to sorghum emergence) tank 
mixtures with atrazine in water or fluid fertilizer. Apply preplant or preemergence in tank mixtures only 
when the sorghum seed has been properly treated with a seed treatment appropriate for s -metolachlor. 
Preplant or preemergence applications of Omni Brand S-Moc 82.4% Safened to sorghum not treated with 
an appropriate seed treatment will result in crop death. 
IMPORTANT: FOR TANK MIXTURES WITH ATRAZINE – If applying Omni Brand S-Moc 82.4% Safened 
in tank mixture with atrazine, all the restrictions and rate limitations on the atrazine label must be followed 
if more restrictive/protective than those on this label. In addition, if atrazine is/must be applied at rates 
lower than those on this label, broadleaf weed control may be affected. Refer to the atrazine label for 
weeds controlled at the reduced rates. 
 
Precautions 
• Applications of Omni Brand S-Moc 82.4% Safened + atrazine on highly alkaline soils or on 
eroded areas where calcareous subsoils are exposed may cause sorghum injury. 
• If sorghum seed is not properly treated with an appropriate s-metolachlor safener, Omni Brand S-
Moc 82.4% Safened + atrazine may severely injure the crop. 
• Under high soil moisture conditions prior to sorghum emergence, injury may occur following 
preplant and preemergence application of Omni Brand S-Moc 82.4% Safened + atrazine. The 
crop will normally outgrow this effect. 
• Use of Omni Brand S-Moc 82.4% Safened + atrazine on sorghum grown under dry mulch tillage 
may cause crop injury. 
 
Restriction 
• Except for the split preplant surface treatment, do not make more than one application per year. 
TANK MIXTURE WITH ATRAZINE 
In addition to the weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + atrazine also controls the following broadleaf weeds when applied either preplant 
surface, preplant incorporated, or preemergence: cocklebur, common purslane, hairy nightshade, 
lambsquarters, morning glory, ragweed, smartweed, and velvetleaf. 
Preplant Surface-Applied: Refer to instructions for use of Omni Brand S-Moc 82.4% Safened under 
Application Procedures section on this label. For minimum-tillage or no-tillage systems only, Omni 
Brand S-Moc 82.4% Safened + atrazine may be applied up to 45 days prior to planting in IA, IL, eastern 
KS, MO, NE, and SD. Use only split applications for treatments made 30-45 days prior to planting, with 
2/3 of the broadcast rate applied initially and the remaining 1/3 at planting. Apply 1.5 pts./A of Omni Brand 
S-Moc 82.4% Safened + labeled rate of atrazine on medium soils with 1.5% organic matter or greater. 
Apply 1.5 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of atrazine on fine soils with less 
than 1.5% organic matter, or apply 1.67 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of 
atrazine on fine soils with 1.5% organic matter or greater. Treatments less than 30 days prior to planting 
may be made either as a split or single application. Under dry conditions, irrigation after application is 
necessary to move Omni Brand S-Moc 82.4% Safened + atrazine into the soil. 
 
Precautions 
• Use on coarse soils or on medium soils with less than 1.5% organic matter may cause crop 
injury. 
 
Preplant Incorporated or Preemergence: Refer to instructions for use of Omni Brand S-Moc 82.4% 
Safened under Application Procedures on this label. On medium soils with 1.5% organic matter or 
greater, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + labeled rate of atrazine . On fine soils 
with less than 1.5% organic matter, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + labeled rate of 
atrazine; on fine soils with 1.5% organic matter or greater, apply 1.2-1.33 pts./A of Omni Brand S-Moc 
82.4% Safened + labeled rate of atrazine.

Omni Brand S-Moc 82.4% Safened master label 49 
 
Precautions 
Use under the following conditions may cause crop injury: on coarse soils; on medium soils with less than 
1.5% organic matter; in NM, OK, or TX, except in northeast OK and the TX Gulf Coast and Blacklands 
areas; and preplant incorporated in AZ or the Imperial Valley of CA. 
TANK MIXTURE OF Omni Brand S-Moc 82.4% Safened OR Omni Brand S-Moc 
82.4% Safened + ATRAZINE, WITH PARAQUAT, GLYPHOSATE + 2,4-D, OR 
GLYPHOSATE FOR MINIMUM-TILLAGE OR NO-TILLAGE SYSTEMS 
In minimum-tillage or no-tillage systems where sorghum (seed treated with appropriate safener for s -
metolachlor) is planted directly into a cover crop, stale seedbed, established sod, or previous crop 
residues, the contact herbicides paraquat, glyphosate + 2,4-D, or glyphosate may be tank mixed with 
Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened + atrazine. See Comment No. 
7 following Table 2. The Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened + 
atrazine portion of the tank mixture provides preemergence control of the weeds listed on this label under 
the respective sections. 
Refer to the label of each product used in combination and observe the planting details, restrictions, and 
all other precautions and limitations. 
Application: Apply before, during, or after planting, but before sorghum emerges. Add paraquat, 
glyphosate + 2,4-D, or glyphosate and apply as directed on the product labels. 
Paraquat: Apply as directed on the product label. This treatment will not control weeds taller than 6 
inches. 
Glyphosate + 2,4-D: apply at labeled rates taking into account weed species and size. See the 
glyphosate + 2,4-D label for weeds controlled, rates for specific weeds, and other information concerning 
use. 
Glyphosate: See the glyphosate labels for weeds controlled, rates, and other use directions. 
SWEET SORGHUM (SEED TREATED WITH SAFENER) 
Apply Omni Brand S-Moc 82.4% Safened preplant surface, preplant incorporated, preemergence, or post 
emergence using the appropriate rate specified below, only when the sweet sorghum seed has been 
properly treated with a seed treatment appropriate for s-metolachlor. Preplant or preemergence 
applications of Omni Brand S-Moc 82.4% Safened to sweet sorghum not treated with an appropriate seed 
treatment will result in crop death. 
Soil-Applied: Apply Omni Brand S-Moc 82.4% Safened up to 45 days before planting. Use only split 
applications for treatments made 30-45 days prior to planting, with 2/3 of the broadcast rate applied 
initially and the remaining 1/3 at planting. Treatments less than 30 days prior to planting may be made 
either as a split or single application. Under dry conditions, irrigation after application is necessary to 
move Omni Brand S-Moc 82.4% Safened into the soil. 
Omni Brand S-Moc 82.4% Safened Rates for Soil Applications to Sweet Sorghum 
Soil Type 
30-45 Days Prior to 
Planting1 
<30 Days Prior to 
Planting At Planting2 
Coarse Do not use 1.33 pts./A 1.0-1.33 pts./A 
Medium 1.5 pts./A 1.5 pts./A 1.33-1.5 pts./A 
Fine 1.67 pts./A 1.67 pts./A 1.33-1.67 pts./A 
1 Use only as a split application with 2/3 of the broadcast rate applied initially and the remaining 1/3 
applied at planting. 
2 Preplant incorporated or preemergence

Omni Brand S-Moc 82.4% Safened master label 50 
 
Post-Applied: Omni Brand S-Moc 82.4% Safened may be applied post emergence to sweet sorghum for 
residual control of grasses and small-seeded broadleaf weeds. Post emergence application to sweet 
sorghum may be made to crop up to 5 inches in height. Omni Brand S-Moc 82.4% Safened will not 
control emerged weeds. Therefore, emerged weeds must be controlled by cultural or other chemical 
methods. When applied alone, Omni Brand S-Moc 82.4% Safened will be safe to emerged sweet 
sorghum. Use of adjuvants is prohibited on sweet sorghum. 
Omni Brand S-Moc 82.4% Safened Rates for Post emergence Applications to 
Sweet Sorghum 
Soil Type Post emergence Rate 
Coarse 1.0-1.33 pts./A 
Medium 1.33 pts./A 
Fine 1.33 pts./A 
 
Precautions 
• If sweet sorghum seed is not properly treated with a seed treatment appropriate for s -
metolachlor, soil applications of Omni Brand S-Moc 82.4% Safened prior to sorghum emergence 
will severely injure the crop. 
• Under high soil moisture conditions prior to sweet sorghum emergence, injury may occur 
following soil applications of Omni Brand S-Moc 82.4% Safened. The crop will normally outgrow 
this effect. 
• To avoid crop injury, do not use Omni Brand S-Moc 82.4% Safened on sorghum grown under dry 
mulch tillage. 
Restrictions 
• DO NOT apply more than once per year. Omni Brand S-Moc 82.4% Safened may be applied 
either as a soil-applied treatment or a post emergence treatment, but not both. 
• Pre-Harvest Interval (PHI): DO NOT apply Omni Brand S-Moc 82.4% Safened post emergence 
within 90 days of harvest. 
SOYBEANS – Omni Brand S-Moc 82.4% Safened ALONE 
[NOT FOR USE IN CALIFORNIA] 
Apply Omni Brand S-Moc 82.4% Safened preplant surface-applied, preplant incorporated, preemergence, 
or post emergence using the appropriate rate specified below. Follow instructions for use of Omni Brand 
S-Moc 82.4% Safened alone under Application Procedures section of this label. 
Restrictions 
• DO NOT apply this product to frozen ground. 
• DO NOT apply more than 2.6 pts./A (2.5 lbs. ai) in a single preemergence application. 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) in a single post emergence application. 
• The total Omni Brand S-Moc 82.4% Safened rate applied preplant, preemergence or post 
emergence to soybeans during any one year must not exceed 3.9 pts./A (3.77 lbs. ai). 
• The combined total amount of the active ingredient (s-metolachlor) from all applications to 
soybeans must not exceed 3.77 lbs. ai/A. 
• Pre-Harvest Interval (PHI): Make post emergence application at least 75 days before harvest. 
• DO NOT graze or feed treated soybean forage, hay, or straw to livestock within 30 days after a 
preplant surface, preplant incorporated, or preemergence application of this product.
 
• DO NOT graze or feed treated forage or hay from soybeans to livestock following a post 
emergence application of Omni Brand S-Moc 82.4% Safened.

Omni Brand S-Moc 82.4% Safened master label 51 
 
Fall Application for Spring Weed Control: 
1. Apply after September 30 in ND, SD, MN, WI, and north of Route 30 in IA. 
2. Apply after October 15 north of Route 91 in NE and south of Route 30 in IA. 
3. Apply after October 31 north of Route 136 in IL. 
In all locations, apply to crop stubble after harvest when the sustained soil temperature at a 4- inch depth 
is less than 55°F and falling. In minimum-till or no-tillage systems on soils having greater than 2.5% 
organic matter, use 1.67-2.0 pts./A of Omni Brand S-Moc 82.4% Safened on medium-textured and 2.0 
pts./A of Omni Brand S-Moc 82.4% Safened on fine-textured soils. A tillage operation may precede the 
application. A fall and/or a spring tillage may follow application, but do not incorporate deeper than 2- 3 
inches. Minimize furrow and ridge formation in the tillage operations. 
Restrictions: If a spring application is made, the total rate of the fall plus spring applications must not 
exceed the maximum total rate for soybeans of 2.5 pts./A depending on soil texture. DO NOT apply to 
frozen ground. 
Fall Application for Italian Ryegrass Control: Omni Brand S-Moc 82.4% Safened may be applied for 
residual control of Italian ryegrass (Lolium multiflorum), including glyphosate- resistant populations. Apply 
Omni Brand S-Moc 82.4% Safened at 1.33-1.67 pts./A in the fall (September 1-December 1) after harvest 
of the previous crop and prior to Italian ryegrass emergence. Use the lower Omni Brand S-Moc 82.4% 
Safened rate for coarse-textured soils and the higher rate for fine-textured soils. A tillage operation may 
precede the application. Do not incorporate to a depth greater than 2-3 inches if tillage follows the 
application of Omni Brand S-Moc 82.4% Safened. For fall applications after emergence of glyphosate-
resistant Italian ryegrass, paraquat can be tank mixed with Omni Brand S-Moc 82.4% Safened for control 
emerged ryegrass. Refer to the paraquat label for specific rates, application instructions, and restrictions. 
Other registered herbicides may be tank mixed with Omni Brand S-Moc 82.4% Safened for control of 
improved control of other weeds present at the time of application. 
Preplant Surface – Spring Application: Use on medium and fine soils with minimum-tillage or no-tillage 
systems. Apply 2/3 the labeled rate of Omni Brand S-Moc 82.4% Safened (1.67 pts./A on medium soils 
and 2.0 pts./A on fine soils). Applications made less than 30 days before planting may be as either a split 
or single treatment. Apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened on coarse soils not more than 
2 weeks prior to planting. On soils with 6-20% organic matter or for extended residual or control of heavy 
weed infestations, up to 2.5 pts./A is allowed. 
Preplant Incorporated or Preemergence: On coarse soils, apply 1.0-1.33 pts./A of Omni Brand S-Moc 
82.4% Safened if organic matter content is less than 3%, or 1.33 pts./A if organic matter content is 3% or 
greater. On medium soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened. On fine soils, 
apply 1.331.67 pts./A of Omni Brand S-Moc 82.4% Safened if organic matter content is less than 3%, or 
1.67-2.0 pts./A if organic matter content is 3% or greater. On soils with 6-20% organic matter or for 
extended residual or control of heavy weed infestations, up to 2.5 pts./A is allowed. 
Post emergence: Apply 1.0-2.0 pts./A as a post emergence treatment to soybeans from emergence up 
through the third trifoliate leaf stage. Omni Brand S-Moc 82.4% Safened will not control emerged weeds 
so it must be applied to a weed-free soil surface or in a tank mixture with products that provide post 
emergence control of weeds present at the time of application. 
Omni Brand S-Moc 82.4% Safened can also be applied as part of a sequential soybean weed control 
program. If Omni Brand S-Moc 82.4% Safened was applied as a preplant surface, preplant incorporated, 
or a preemergence treatment, a second treatment of Omni Brand S-Moc 82.4% Safened can be applied 
post emergence provided that the total Omni Brand S-Moc 82.4% Safened rate during any one crop does 
not exceed 3.7 pts./A. 
SOYBEANS – Omni Brand S-Moc 82.4% Safened COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture. 
 
Water or fluid fertilizer may be used as carrier for Omni Brand S-Moc 82.4% Safened in combination with 
metribuzin, linuron, metribuzin + chlorimuron-ethyl, imazethapyr, imazaquin, ethafluralin, or clomazone.

Omni Brand S-Moc 82.4% Safened master label 52 
 
Restrictions 
• For all of the following combinations, on soybeans use up to 2.5 pts./A Omni Brand S-Moc 82.4% 
Safened preplant incorporated or preemergence treatment on soils having an organic matter 
content between 6% and 20%. The total Omni Brand S-Moc 82.4% Safened rate applied to 
soybeans must not exceed 3.9 pts./A (3.77 lbs. ai) per year. 
TANK MIXTURE WITH METRIBUZIN 
In addition to those weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + metribuzin, when applied as directed, also controls hairy nightshade, hemp sesbania, 
lambsquarters, prickly sida, ragweed, smartweed, velvetleaf, Venice mallow, and wild mustard, and 
provides partial control of cocklebur and jimsonweed. 
Apply Omni Brand S-Moc 82.4% Safened and metribuzin preplant incorporated or preemergence, using 
the appropriate rates from the table below. Preplant Incorporated or Preemergence: Follow instructions 
for use of Omni Brand S-Moc 82.4% Safened alone under Application Procedures. 
Sequential: Apply Omni Brand S-Moc 82.4% Safened alone Preplant Incorporated, as specified in the 
table below for this tank mixture. Follow with a preemergence application of metribuzin during planting 
(behind the planter) or after planting, but before weeds or soybeans emerge. 
Refer to the metribuzin label for planting details and soybean variety restrictions. 
Omni Brand S-Moc 82.4% Safened + Metribuzin – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of metribuzin 
Broadcast Rate per Acre 
Soil Texture* 0.5 to less than 3% 
organic matter 
Omni Brand S-Moc 
82.4% Safened 
3% organic matter or 
greater 
Omni Brand S-Moc 82.4% 
Safened 
COARSE 
Loamy sand (over 2% organic 
matter), sandy loam 
0.8-1.0 pts. 1.0 pt. 
MEDIUM 1.0-1.33 pts. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67 pts. 
Mississippi Delta only 
Silty clay, clay 
1.33 pts. 1.33-1.67 pts. 
Muck or Peat (soils with more than 20% organic matter) – DO NOT APPLY 
 * On all sand and on loamy sand with less than 2% organic matter, do not use this tank mixture 
preemergence, or the sequential treatment. Do not use the tank mixture preplant incorporated on any 
sand, loamy sand, or sandy loam, or crop injury may occur. 
 
Restrictions 
Follow most restrictive limitations and precautions on the Omni Brand S-Moc 82.4% Safened – 
Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the metribuzin label. 
Precautions 
To avoid crop injury, do not use the tank mix or sequential application on soil with less than 0.5% organic 
matter or on alkaline soil with a pH over 7.4, or crop injury may occur. If heavy rain occurs soon after 
application, crop injury may result, especially in poorly drained areas where water stands for several days. 
TANK MIXTURE WITH LOROX 
In addition to those weeds controlled by Omni Brand S-Moc 82.4% Safened alone, Omni Brand S-Moc 
82.4% Safened + linuron, applied preemergence, also controls the following broadleaf weeds:

Omni Brand S-Moc 82.4% Safened master label 53 
 
lambsquarters, prickly sida, ragweed, smartweed, Venice mallow, and wild mustard, and provides partial 
control of cocklebur, jimsonweed, morning glory, and velvetleaf. 
Preemergence: Apply during planting (behind planter) or after planting, but before weeds or soybeans 
emerge. Refer to the linuron label for planting details. Apply the appropriate rates from the table below. 
Precaution 
To avoid crop injury, do not use on soil with less than 0.5% organic matter. 
Omni Brand S-Moc 82.4% Safened + Linuron – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of linuron 
Broadcast Rate per Acre 
Soil Texture* 0.5% to Less Than 3% 
Organic Matter 
3% Organic Matter or Greater 
COARSE** 0.8 pt. 1.0 pt. 
MEDIUM 1.0 pt. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67 pts. 
Muck or Peat (soils with more than 20% organic matter) – DO NOT USE 
 * DO NOT use on sand, gravelly soils, or exposed subsoils. 
 ** DO NOT use on loamy sand, except in the northeastern U.S. on loamy sand with over 1% organic 
matter. 
TANK MIXTURE WITH TRIFLURALIN 
Omni Brand S-Moc 82.4% Safened + trifluralin tank mix applied preplant incorporated controls those 
weeds listed under Omni Brand S-Moc 82.4% Safened Applied Alone and those weeds listed for 
trifluralin alone on the trifluralin label. Omni Brand S-Moc 82.4% Safened + trifluralin may be applied by 
ground or aerial equipment and incorporated up to 14 days before planting. Follow the procedures on the 
trifluralin and Omni Brand S-Moc 82.4% Safened labels, using equipment that provides uniform 2-inch 
incorporation. 
Apply Omni Brand S-Moc 82.4% Safened + trifluralin tank mix using the appropriate rate from the 
Soybeans – Omni Brand S-Moc 82.4% Safened Alone section of this label and the trifluralin alone 
section of the trifluralin label for the specific soil texture/organic matter classification and weed species 
expected. 
To control DNA-resistant goosegrass* and other species on the respective labels where the soil organic 
matter is 3% or less, apply the rate in the table below. 
Omni Brand S-Moc 82.4% Safened + Trifluralin – Organic Matter Content Less 
Than 3% 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of trifluralin 
Broadcast Rate per Acre 
 Organic Matter 
Less Than 3% 
COARSE* 0.8-1.0 pt. 
MEDIUM 1.0 pt. 
FINE 1.33 pts. 
 * Where a range of rates is given for Omni Brand S-Moc 82.4% Safened, use the minimum rate where 
DNA-resistant goosegrass is the predominant species.

Omni Brand S-Moc 82.4% Safened master label 54 
 
Follow the most restrictive limitations and precautions on the Soybeans – Omni Brand S-Moc 82.4% 
Safened Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the trifluralin labels. 
TANK MIXTURE WITH IMAZAQUIN 
This tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
imazaquin alone. 
Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds controlled by Omni 
Brand S-Moc 82.4% Safened and to the imazaquin label for weeds controlled by imazaquin. Refer to the 
imazaquin label for geographical locations where this tank mixture may be applied. 
Apply Omni Brand S-Moc 82.4% Safened + imazaquin preplant incorporated or preemergence, using 
rates in the table below. Follow use directions under Application Instructions on the imazaquin label. 
For preplant incorporated applications, apply and incorporate within 30 days before planting. Observe all 
other precautions and limitations on the imazaquin labels. 
Omni Brand S-Moc 82.4% Safened + Imazaquin – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of imazaquin. 
Broadcast Rate per Acre 
 Less Than 3% Organic Matter 3% or More Organic Matter 
COARSE 0.8 pt. 1.0 pt. 
MEDIUM 1.0 pt. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67* pts. 
Muck or Peat (soils with more than 20% organic matter) – DO NOT USE 
 * Use the higher rate of Omni Brand S-Moc 82.4% Safened if heavy weed infestations are expected. 
Restrictions: Follow the most restrictive limitations and precautions on the Omni Brand S -Moc 82.4% 
Safened – Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean 
directions on the imazaquin label. 
TANK MIXTURE WITH METRIBUZIN + CHLORIMURON-ETHYL 
This tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
metribuzin + chlorimuron-ethyl alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone 
section for weeds controlled by Omni Brand S-Moc 82.4% Safened and to the metribuzin + chlorimuron-
ethyl label for weeds controlled by metribuzin + chlorimuron-ethyl. 
Apply preplant incorporated or preemergence, using the appropriate rates from the table below. Preplant 
Incorporated: Apply within 2 weeks of planting. Uniformly incorporate into the top 1-2 inches of soil 
before planting soybeans. Preemergence: Apply after planting, but before soybeans emerge. 
Follow the most restrictive limitations and precautions on the Omni Brand S-Moc 82.4% Safened – 
Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the metribuzin + chlorimuron-ethyl label, including varietal restrictions. 
Omni Brand S-Moc 82.4% Safened + Metribuzin + Chlorimuron-ethyl– Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of metribuzin + 
chlorimuron-ethyl. Broadcast Rate per Acre 
 Less Than 3% Organic Matter 3% or More Organic Matter 
COARSE 0.8 pt. 1.0 pt. 
MEDIUM 1.0 pt. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67* pts. 
Muck or Peat (soils with more than 20% organic matter) – DO NOT USE 
* Refer to the metribuzin + chlorimuron-ethyl label for appropriate rate according to geographical location, 
soil and organic matter classification, and pH limitations.

Omni Brand S-Moc 82.4% Safened master label 55 
 
Restriction: DO NOT apply to sand, or to any soil with less than 0.5% organic matter, or to any soil with 
pH greater than 7.0, except as noted on the metribuzin + chlorimuron-ethyl label. 
TANK MIXTURE WITH CLOMAZONE 
This tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
clomazone alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds 
controlled by Omni Brand S-Moc 82.4% Safened and to the clomazone label for weeds controlled by 
clomazone. 
Apply Omni Brand S-Moc 82.4% Safened + clomazone preplant incorporated, using rates in the table 
below. Follow all clomazone application instructions as to incorporation interval, geographical location, 
equipment operation, soil moisture conditions, etc. 
Follow the most restrictive limitations and precautions on the Omni Brand S-Moc 82.4% Safened – 
Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the clomazone label, including rotational restrictions. 
Omni Brand S-Moc 82.4% Safened + Clomazone – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of clomazone. 
Broadcast Rate per Acre 
Soil Texture 0.5-3% 
Organic Matter 
Greater Than 3% Organic 
Matter 
COARSE 0.8 pt. 1.0 pt. 
MEDIUM 1.0 pt. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67 pts. 
 
TANK MIXTURE WITH ETHAFLURALIN 
This tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
ethafluralin alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds 
controlled by Omni Brand S-Moc 82.4% Safened and to the ethafluralin label for weeds controlled by 
ethafluralin. 
Apply Omni Brand S-Moc 82.4% Safened and ethafluralin preplant incorporated, using the appropriate 
rates from the table below. 
Preplant Incorporated: Follow soil preparation procedures for ethafluralin. 
Sequential: Apply ethafluralin alone preplant incorporated as specified on the ethafluralin label. Follow 
with a preemergence application of Omni Brand S-Moc 82.4% Safened during planting (behind the 
planter) or after planting, but before weeds or soybeans emerge. 
Omni Brand S-Moc 82.4% Safened + Ethafluralin – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of ethafluralin. 
Broadcast Rate per Acre 
Soil Texture Less Than 3% Organic Matter 3% or More Organic Matter 
COARSE 1.0-1.33 pts. 1.33 pts. 
MEDIUM 1.33-1.67 pts. 1.33-1.67 pts. 
FINE 1.33-1.67 pts. 1.67-2.0 pts. 
Muck or Peat (soils with more than 20% organic matter) – DO NOT USE 
Follow the most restrictive limitations and precautions on the Omni Brand S-Moc 82.4% Safened – 
Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the ethafluralin label.

Omni Brand S-Moc 82.4% Safened master label 56 
 
TANK MIXTURE WITH IMAZETHAPYR 
This tank mixture controls all weeds controlled by Omni Brand S-Moc 82.4% Safened alone and by 
imazethapyr alone. Refer to the Omni Brand S-Moc 82.4% Safened Applied Alone section for weeds 
controlled by Omni Brand S-Moc 82.4% Safened and to the imazethapyr label for weeds controlled by 
imazethapyr. Refer to the imazethapyr label for geographical locations where this tank mixture may be 
applied. 
Apply Omni Brand S-Moc 82.4% Safened + imazethapyr early preplant, preplant incorporated, or 
preemergence after planting, using rates in the table below. Application can be made in water or liquid 
fertilizer. Follow all use directions under Soil Applications on the imazethapyr label. For early preplant and 
preplant incorporated applications, apply within 30 days before planting. 
Follow the most restrictive limitations and precautions on the Omni Brand S-Moc 82.4% Safened – 
Soybeans Alone section of the Omni Brand S-Moc 82.4% Safened label and the Soybean directions on 
the imazethapyr label, including rotational restrictions. 
Omni Brand S-Moc 82.4% Safened + Imazethapyr – Soybeans 
Apply indicated rates of Omni Brand S-Moc 82.4% Safened with labeled rates of imazethapyr. 
Broadcast Rate per Acre 
Soil Texture Less Than 3% 
Organic Matter 
3% or More 
Organic Matter 
COARSE 0.8 pt. 1.0 pt. 
MEDIUM 1.0 pt. 1.33 pts. 
FINE 1.33 pts. 1.33-1.67 pts. 
 
Sequential: Apply Omni Brand S-Moc 82.4% Safened early preplant, preplant incorporated, or 
preemergence after planting at 0.8 pt./A on coarse soils and 1.0 pt./A on medium- and fine-textured soils. 
Follow with a sequential post emergence application of imazethapyr to control emerged weeds according 
to the imazethapyr label. Omni Brand S-Moc 82.4% Safened will improve the consistency and level of 
control from imazethapyr on most grass species. Refer to the imazethapyr post emergence label for a 
listing of weeds controlled, application rate, and growth stage limitations. 
TANK MIXTURE WITH METRIBUZIN, IMAZAQUIN, LINURON, METRIBUZIN + 
CHLORIMURON-ETHYL, OR IMAZETHAPYR, PLUS PARAQUAT, OR 
GLYPHOSATE FOR MINIMUM-TILLAGE OR NO-TILLAGE SYSTEMS 
In minimum-tillage or no-tillage systems where soybeans are planted directly into a cover crop, stale 
seedbed, established sod, or previous crop residues, the contact herbicides paraquat, or glyphosate may 
be added to a tank mix of either Omni Brand S-Moc 82.4% Safened + metribuzin, Omni Brand S-Moc 
82.4% Safened + imazaquin, Omni Brand S-Moc 82.4% Safened + linuron, Omni Brand S-Moc 82.4% 
Safened + metribuzin + chlorimuron-ethyl, or Omni Brand S-Moc 82.4% Safened + imazethapyr. When 
used as directed, the paraquat portion of the tank mixture controls most emerged weeds and suppresses 
many perennial weeds. Glyphosate combinations will control emerged annual and perennial weeds when 
applied as directed on the glyphosate label. The Omni Brand S-Moc 82.4% Safened + metribuzin, 
imazaquin, linuron, metribuzin + chlorimuron-ethyl, or imazethapyr portion of the tank mixture provides 
preemergence control of the weeds listed on this label in the tank mixture section for Omni Brand S -Moc 
82.4% Safened + metribuzin, Omni Brand S-Moc 82.4% Safened + imazaquin, Omni Brand S-Moc 82.4% 
Safened + metribuzin + chlorimuron-ethyl, and Omni Brand S-Moc 82.4% Safened + imazethapyr, 
respectively. 
Refer to the label of each product used in combination and observe the planting details, soybean variety 
restrictions, information regarding application to soybeans, geographical restrictions, and all other 
precautions and limitations. 
Application: Apply before, during, or after planting, but before the soybeans emerge. Add paraquat or 
glyphosate and apply as directed on the product labels.

Omni Brand S-Moc 82.4% Safened master label 57 
 
Paraquat: Apply as directed on the product label. This treatment will not control weeds taller than 6 
inches. 
Restriction 
• DO NOT apply combinations containing paraquat in suspension-type liquid fertilizers, as the 
activity of paraquat will be reduced. 
 
Glyphosate: See the glyphosate label for weeds controlled, rates, and other use directions. 
Apply in 20-60 gals. of water or fluid fertilizer per acre with ground equipment. 
Omni Brand S-Moc 82.4% Safened + Metribuzin + Paraquat, or Glyphosate 
On loamy sand with over 2% organic matter, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + 
labeled rate of metribuzin. On medium soils, apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened + 
labeled rate of metribuzin. On fine soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened + 
labeled rate of metribuzin. 
Precautions 
To avoid crop injury, do not use this tank mixture on soil with less than 0.5% organic matter, on alkaline 
soil with a pH over 7.4, or on all sand and on loamy sand with less than 2% organic matter. If heavy rain 
occurs soon after application, crop injury may result, especially in poorly drained areas where water 
stands for several days, or where the seeding slit has not been properly closed. 
Omni Brand S-Moc 82.4% Safened + Imazaquin + Paraquat, or Glyphosate 
On coarse soils, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + labeled rate of imazaquin. On 
medium soils, apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of imazaquin. On 
fine soils, apply 1.67 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of imazaquin. 
Restrictions 
• Pre-Harvest Interval (PHI): DO NOT apply within 90 days of harvest. 
• DO NOT graze or feed treated soybean forage, hay, or straw to livestock. 
Omni Brand S-Moc 82.4% Safened + Linuron + Paraquat, Glyphosate 
On coarse soils*, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened + labeled rate of linuron. On 
medium soils, apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of linuron. On fine 
soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened + labeled rate of linuron. 
 * DO NOT use on loamy sand, except in the northeastern U.S. on loamy sand with over 1% organic 
matter, or injury may occur. DO NOT use on sand, gravelly soils, or exposed subsoils, or injury may 
occur. 
Precaution 
 • To avoid crop injury, do not use on soil with less than 0.5% organic matter . 
Omni Brand S-Moc 82.4% Safened + Metribuzin + chlorimuron-ethyl, + Paraquat, 
Glyphosate 
Use only where soils have 0.5-5% organic matter. On coarse soils (except sand), apply 1.0 pt./A of Omni 
Brand S-Moc 82.4% Safened, on medium soils, apply 1.33 pts./A of Omni Brand S-Moc 82.4% Safened, 
and on fine soils, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened. Refer to the metribuzin + 
chlorimuron-ethyl label for appropriate rate, according to geographical location, soil and organic matter 
classification, pH limitations, and all other use directions. 
Restriction 
• DO NOT apply to sand, or to any soil with less than 0.5% organic matter, or to any soil with pH 
greater than 7.0, except as noted on the metribuzin + chlorimuron-ethyl label.

Omni Brand S-Moc 82.4% Safened master label 58 
 
Omni Brand S-Moc 82.4% Safened + Imazethapyr + Paraquat, Glyphosate 
On coarse soils, apply 1.0 pt./A of Omni Brand S-Moc 82.4% Safened, on medium soils, apply 1.33 pts./A 
of Omni Brand S-Moc 82.4% Safened, on fine soils, apply 1.67 pts./A of Omni Brand S-Moc 82.4% 
Safened + labeled rate of imazethapyr. Refer to the imazethapyr + paraquat and glyphosate labels for 
appropriate rate, according to geographical location, soil and organic matter classification, pH limitations, 
and all other use directions. 
POSTEMERGENCE USE ON SOYBEANS – Omni Brand S-Moc 82.4% Safened 
TANK MIXTURES 
Tank Mixture with Glyphosate 
Omni Brand S-Moc 82.4% Safened at 1.0-1.33 pts./A may be tank mixed with glyphosate products at 
labeled rates and applied from emergence up through the third trifoliate leaf stage of glyphosate- tolerant 
soybeans. Omni Brand S-Moc 82.4% Safened alone will not control emerged weeds. Use this treatment 
only on soybeans designated for use with glyphosate (e.g., glyphosate-tolerant soybeans). The 
glyphosate product must be registered for post emergence use in glyphosate-tolerant soybeans. 
Tank Mixture with Glufosinate 
Use this treatment only on soybeans designated for use with glufosinate. Omni Brand S-Moc 
82.4% Safened at 1.0-1.33 pts./A may be tank mixed with glufosinate herbicides at labeled rates and applied 
from emergence up through the third trifoliage leaf stage of soybeans. Omni Brand S-Moc 82.4% Safened alone 
will not control emerged weeds. 
Follow the tank mix product label for adjuvant suggestions. The use of COC or UAN with Omni Brand S -
Moc 82.4% Safened may result in temporary crop injury. 
Restrictions 
• DO NOT apply more than 1.33 pts./A (1.3 lbs. ai) post emergence. 
• Pre-Harvest Interval (PHI): Make post emergence application at least 90 days before harvest. 
• DO NOT graze or feed treated forage or hay from soybeans to livestock following a post 
emergence application of Omni Brand S-Moc 82.4% Safened. 
SUGAR BEETS – Omni Brand S-Moc 82.4% Safened ALONE 
Post emergence Applications 
Omni Brand S-Moc 82.4% Safened may be applied post emergence to sugar beets after the sugar beets 
have reached the first true-leaf stage. However, because Omni Brand S-Moc 82.4% Safened is primarily 
a soil-active herbicide, it must be applied prior to weed emergence in order to provide consistent control 
of listed weeds. As such, weeds that are emerged with or before the crop, or that are present at the time 
Omni Brand S-Moc 82.4% Safened is applied, must be controlled with another appropriately labeled 
herbicide. Apply Omni Brand S-Moc 82.4% Safened at 1 pt./A on coarse soils, 1.33 pts./A on medium 
soils, and 1.67 pts./A on fine soils. More than one post emergence application may be applied, but the 
total must not exceed 2.6 pts./A. Weeds present at the time of application will not be controlled. 
Precaution 
In coarse soils, Omni Brand S-Moc 82.4% Safened applied before emergence of sugar beets (i.e., other 
than post emergence) may cause injury. 
Restrictions 
• DO NOT apply more than 2.6 pts./A (2.5 lbs. ai) post emergence. 
• Pre-Harvest Interval (PHI): DO NOT harvest within 60 days after the last application. 
 
SUGAR BEETS – Omni Brand S-Moc 82.4% Safened TANK MIX COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read 
and follow the applicable restrictions and limitations and directions for use on all product labels involved in 
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of 
each product in the tank mixture.

Omni Brand S-Moc 82.4% Safened master label 59 
 
 
Omni Brand S-Moc 82.4% Safened may be tank mixed with quizalofop p-ethyl, sethoxydim, clethodim, 
clopyralid, or flusulfuron methyl and applied to sugar beets. Tank mixtures of these products with Omni 
Brand S-Moc 82.4% Safened will increase the risk of crop injury over that of either product applied alone, 
as the Omni Brand S-Moc 82.4% Safened formulation has some adjuvant properties. The addition of a 
spray adjuvant such as crop oil concentrates (COC’s) or methylated seed oils (MSO’s) can further 
increase the risk of crop injury. Injury risk can be reduced by using the lowest effective rate of the tank 
mix partner(s) and/or adjuvant and by avoiding applications under adverse growing conditions or high soil 
or air humidity. 
 
SUGARCANE 
Apply Omni Brand S-Moc 82.4% Safened as a preplant, preemergence, or post emergence treatment for 
weed control in sugarcane. It may also be used in a treatment program that includes a 
preplant/preemergence application followed by a post emergence/post-directed application. 
Restrictions: 
• DO NOT apply more than 1.71 qts./A (3.26 lbs. ai) of Omni Brand S-Moc 82.4% Safened per 
year. 
• DO NOT apply more than 1.22 qts./A (2.34 lbs. ai) of Omni Brand S-Moc 82.4% Safened as a 
preplant or preemergence application per year. 
• DO NOT apply more than 0.98 qts./A (1.88 lbs. ai) of Omni Brand S-Moc 82.4% Safened as a 
post emergence application per year. 
• DO NOT apply more than 0.49 qts./A (0.94 lbs. ai) of Omni Brand S-Moc 82.4% Safened as a 
post emergence application if a preplant or preemergence application was made. 
• DO NOT make more than two applications per year. 
• DO NOT make applications less than 14 days apart. 
• DO NOT apply to sugarcane that is taller than 60 inches. 
• DO NOT make a post emergence application within 100 days of harvest. 
• DO NOT exceed the total combined maximum annual sugarcane rates for s-metolachlor 
container products. 
Apply Omni Brand S-Moc 82.4% Safened at a rate of 0.89 – 1.22 qts./A before planting, preemergence 
after new plantings, or after harvest, but before re-emergence of ratoon-cane. Use the higher rate on 
heavier soils and soils with higher organic matter content. 
Post emergence Applications 
Omni Brand S-Moc 82.4% Safened will not control emerged weeds so apply only to a weed-free soil 
surface or in tank mixture with products that provide post emergence control of weeds present at the time 
of application. Apply Omni Brand S-Moc 82.4% Safened at 0.49 – 0.98 qts./A post emergence before the 
sugarcane reaches 60 inches in height. Post emergence applications may be made as broadcast post-
over-the-top or as post-directed spray to soil between the rows and the base of the sugarcane. 
If a preemergence application was made earlier in the season (not to exceed 1.22 qts ./A), only 0.49 qts./A 
may be applied post emergence. The total amount of Omni Brand S-Moc 82.4% Safened applied 
(preemergence + post emergence) may not exceed 1.71 qts./A/year. 
SUGARCANE - Omni Brand S-Moc 82.4% Safened TANK MIX COMBINATIONS 
It is the pesticide user’s responsibility to ensure that all products in the listed mixtures are registered for 
the intended use. Users must follow the most restrictive directions for use and precautionary statements 
of each product in the tank mixture. 
This product may be tank mixed with other registered sugarcane herbicides, insecticides, and fungicides. 
The tank mix partners are to be applied by the same methods and the same timings as Omni Brand S -
Moc 82.4% Safened unless otherwise specified in the tank mix product label. Perform a compatibility test 
before spraying the tank mix application.

Omni Brand S-Moc 82.4% Safened master label 60 
 
SUNFLOWERS – Omni Brand S-Moc 82.4% Safened ALONE 
Preplant Incorporated or Preemergence 
Within the rate ranges given below, use the higher rate of Omni Brand S-Moc 82.4% Safened if heavy 
weed infestations are expected. On coarse soils with organic matter less than 3%, apply 1.0-1.33 pts./A of 
Omni Brand S-Moc 82.4% Safened; apply 1.33 pts./A if organic matter is 3% or greater. On medium soils, 
apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened. On fine soils with organic matter of less 
than 3%, apply 1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened; apply 1.67-2.0 pts./A if organic 
matter is 3% or greater. 
Restrictions 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT allow livestock to graze or feed in treated area. 
• DO NOT exceed the maximum label rates for sunflowers for the soil type. 
TOMATOES – Omni Brand S-Moc 82.4% Safened ALONE 
Transplanted 
Apply Omni Brand S-Moc 82.4% Safened preplant incorporated or preplant before transplanting. If the 
latter method is used, keep soil disturbance to a minimum during the transplanting operation. Application 
may also be post directed to transplants after the first settling rain or irrigation. When an application is 
made postdirected, apply in a minimum of 20 gallons of water per acre and minimize contact with tomato 
plants. Omni Brand S-Moc 82.4% Safened will not control emerged weeds. In bedded transplanted 
tomatoes, apply Omni Brand S-Moc 82.4% Safened preplant non-incorporated to the top of the pressed 
bed as the last step prior to laying plastic. Omni Brand S-Moc 82.4% Safened may also be used to treat 
row-middles in bedded tomatoes, as long as the total amount of Omni Brand S -Moc 82.4% Safened does 
not exceed the maximum allowed per crop. 
Seeded 
Omni Brand S-Moc 82.4% Safened may be applied post-directed to direct-seeded tomatoes. Tomato 
plants must be at least 4 inches tall at the time of application, and the product must be applied in a 
minimum of 20 gallons of water per acre. Minimize spray contact with tomato plants. Omni Brand S -Moc 
82.4% Safened will not control emerged weeds. 
Tomato Use Rates: On coarse soils, apply 1.0-1.33 pts./A of Omni Brand S-Moc 82.4% Safened if 
organic matter is less than 3% or 1.33 pts./A if organic matter is 3% or greater. On medium soils , apply 
1.33-1.67 pts./A of Omni Brand S-Moc 82.4% Safened. On fine soils, apply 1.33-1.67 pts./A of Omni 
Brand S-Moc 82.4% Safened if organic matter is less than 3% or 1.67-2.0 pts./A if organic matter is 3% or 
greater. 
Precautions 
• May damage transplants that have been weakened by any cause. To prevent damage, plant only 
healthy transplants. Do not plant when wet, cool, or unfavorable growing conditions exist. 
• In transplanted tomatoes, if Omni Brand S-Moc 82.4% Safened is applied preplant incorporated, 
incorporate to a depth less than the depth of transplanting, and use the lower end of the rate 
range for the given soil type, or damage may occur. 
 
• For row-middle applications where tomatoes are grown on sandy soils and where high soil 
moisture conditions can exist (e.g., low binding and high evaporation conditions), as may be 
found in the States of Florida, Georgia, Maryland, and Virginia, there is potential for crop injury in 
the form of leaf epinasty. The risk of this type of injury can be reduced by: a) incorporating the 
Omni Brand S-Moc 82.4% Safened immediately following application, b) applying the Omni 
Brand S-Moc 82.4% Safened seven or more days before transplanting (but only after the beds 
have been formed), c) minimizing the application of Omni Brand S-Moc 82.4% Safened onto the 
plastic of the bed, or d) any combination of the above.
 
• Applications may be made using ground equipment, in concentrated spray volumes. 
• Applications may be made as a foliar broadcast spray to the soil within 1 week of transplanting 
and again at blooming/fruiting to the row middles as a banded/directed application 38- 77 days 
after the first treatment.

Omni Brand S-Moc 82.4% Safened master label 61 
 
Restrictions 
• DO NOT apply more than 2.0 pts./A (1.9 lbs. ai) of Omni Brand S-Moc 82.4% Safened per year. 
• DO NOT apply to varieties or cultivars with unknown tolerance to Omni Brand S-Moc 82.4% 
Safened. 
• DO NOT exceed the maximum label rate for the soil texture per year. 
• Apply only by ground application. 
• 90-Day PHI – If the single application rate of Omni Brand S-Moc 82.4% Safened is greater than 
1.33 pts./A (up to 2.0 pt./A), do not harvest tomatoes within 90 days of application. 
• 30-Day PHI – If the application of Omni Brand S-Moc 82.4% Safened does not exceed 1.33 
pts./A, do not harvest tomatoes within 30 days of application. 
 
When applying at 1.33 pts./A with a 30-day PHI, the following restrictions apply: 
• DO NOT exceed two applications per year. 
• The use of adjuvants is prohibited. 
 
Omni Brand S-Moc 82.4% Safened FOR USE ON SOD FARMS 
DO NOT USE IN GREENHOUSES OR OTHER ENCLOSED STRUCTURES. 
APPLICATION PROCEDURES 
Ground Application: Apply Omni Brand S-Moc 82.4% Safened alone or in tank mixtures by ground 
equipment in a minimum of 10 gallons of spray mixture per acre, unless otherwise specified. 
 
Use sprayers that provide accurate and uniform application. For Omni Brand S -Moc 82.4% Safened 
tank mixtures with wettable powder or dry flowable formulations, screens and strainers should be no 
finer than 50mesh. Rinse sprayer thoroughly with clean water immediately after use. 
 
Calculate the amount of herbicide needed for band treatment by the following formula: 
 
band width in inches X broadcast rate = amount needed row width in 
inches per acre per acre of field 
 
Aerial Application (Sod Farms Only): Apply Omni Brand S-Moc 82.4% Safened in water alone or in 
tank mixtures with atrazine, simazine, or other herbicides registered for use on sod farms in a minimum 
total volume of 2 gal/A by aircraft. See Turfgrass section for a listing of applicable warm -season 
grasses. Avoid application under conditions where uniform coverage cannot be obtained or where 
excessive spray drift may occur. In order to assure that spray will be controllable within the target area 
when used according to label directions, apply at a maximum height of 10 ft., using low - drift nozzles at 
a maximum pressure of 40 psi, and restrict application to periods when wind speed is 10 mph or less. 
To assure that spray will not adversely affect adjacent sensitive non-target plants, apply Omni Brand S-
Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened mixtures at a minimum upwind distance of 
400 ft. from sensitive plants. 
 
Avoid application to humans or animals. Flagmen and loaders must avoid inhalation of spray mist and 
prolonged contact with skin. 
 
Turfgrass 
Warm Season Grasses (Bermudagrass, Centipedegrass, St. Augustinegrass, Bahiagrass, and 
Zoysiagrass) including Commercial St. Augustinegrass Sod Production 
Apply Omni Brand S-Moc 82.4% Safened before weeds emerge. Since soil moisture is necessary for 
activation, irrigate with ½ inch of water if rainfall does not occur within 7 days after treatment (See 
following Precautions). 
 
Weeds Controlled 
Common Name Scientific Name Rate of Omni Brand S-Moc 
82.4% Safened*

Omni Brand S-Moc 82.4% Safened master label 62 
 
Annual sedge Cyperus compressus 
Yellow nutsedge Cyperus esculentus 2.6 pt./A 
Smooth crabgrass Digitaria ischaemum 
Large crabgrass Digitaria sanguinalis 
Bearded sprangletop Leptochloa fascicularis 
1.3-2.6 pt./A Mexican sprangletop Leptochloa uninervia 
Doveweed Murdannia nudiflora 
Annual bluegrass Poa annua 
 
*1.0 pt./A = 0.3 ml/1,000 sq. ft. 1.3 pt./A = 0.4 ml/1,000 sq. ft. 2.6 pt./A = 0.9 ml/1,000 sq. ft. 
 
Restrictions: 
• DO NOT use Omni Brand S-Moc 82.4% Safened on turfgrasses in New York State. 
• DO NOT use on golf greens, tees, or aprons 
• Split rate of applications can be made at rates not less than 1 pt./A (0.9 lbs. ai/A). 
• DO NOT apply more than 2.6 pts./A (2.4 lbs. ai/A) in a single application. 
• DO NOT apply more than once every 6 weeks. 
• For commercial sod production, DO NOT apply more than 4.2 pt./A (4.0 lbs. ai/A) per year to the 
same area used for sod production. 
• For commercial sod production, DO NOT make more than 4 applications per acre per year (not to 
exceed 4.2 pts./A (4.0 lbs. ai/A) per year). 
• DO NOT graze or feed turf clippings to animals. 
 
Precautions for all uses on sod farms: 
Delayed spring green-up, temporary slowing of growth and yellowing may occur following application. To 
avoid turf injury: 
• Application of a nitrogen-containing fertilizer at or soon after applying Omni Brand S-Moc 82.4% 
Safened will minimize delay in spring green-up and any temporary yellowing; 
• Use only on turfgrass not under stress from infestations of insects, nematodes, or diseases; 
• Do not seed or overseed with desirable turfgrass 4 months before or after treatment, and 
• Do not apply this product to newly seeded grasses until they have overwintered and have a well -
developed rhizome system. 
• Before using Omni Brand S-Moc 82.4% Safened in the tank mix with fluid fertilizer or other registered 
pesticides, determine the tolerance of the turf species by applying the combination to a limited area 
during a period of active growth. 
• In turfgrass areas which have heavy thatch, the weed control of Omni Brand S-Moc 82.4% Safened 
may be reduced. 
 
STORAGE AND DISPOSAL 
Pesticide Storage 
This product may be stored at temperatures down to 30 degrees below 0°F. 
Pesticide Disposal 
Do not contaminate water, food, or feed by storage or disposal. Open dumping is prohibited. Wastes 
resulting from the use of this product are toxic. Improper disposal of unused pesticide, spray mixture, 
or rinsate is a violation of federal law. Pesticide, spray mixture, or rinsate that cannot be used 
according to label instructions must be disposed of according to federal, state, or local procedures. For 
guidance in proper disposal methods, contact your State Pesticide or Environmental Control Agency, 
or the Hazardous Waste representative at the nearest EPA Regional Office. 
Container Handling [equal to or less than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse 
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the

Omni Brand S-Moc 82.4% Safened master label 63 
 
container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment 
or a mix tank or store rinsate for later use and disposal. Drain for 10 seconds after the flow begins to 
drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and 
dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by 
burning. If burned, stay out of smoke. 
Container Handling [greater than 5 gallons] 
Refillable container. Refill this container with pesticide only. Do not reuse this container for any other 
purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the 
container. Cleaning before refilling is the responsibility of the person refilling. To clean container before 
final disposal, empty the remaining contents from this container into application equipment or mix tank. 
Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump 
for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times. Then offer for recycling if available or puncture and dispose of in a 
sanitary landfill, or by incineration. 
Container Handling [greater than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) or 
pressure rinse promptly after emptying. 
Triple rinse: Empty the remaining contents into application equipment or a mix tank. Fill the container 
1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, 
ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it 
back and forth several ties. Turn the container over onto its other end and tip it back and forth several 
times. 
Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of 
in a sanitary landfill, or by incineration. 
Pressure rinse: Empty the remaining contents into application equipment or a mix tank and continue to 
drain for 10 seconds after the flow begins to drip. Hold container upside down over application 
equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the 
side of the container, and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after 
flow begins to drip. Then offer for recycling if available, or puncture and dispose of in a sanitary landfill, 
or by incineration, or by other procedures allowed by state and local authorities. 
 
 
CONDITIONS OF SALE - LIMITED WARRANTY 
AND LIMITATIONS OF LIABILITY AND REMEDIES 
Read the Conditions of Sale - Warranty and Limitations of Liability and Remedies before using 
this product. If the terms are not acceptable, return the product, unopened, and the full 
purchase price will be refunded. 
 
The directions on this label are believed to be reliable and must be followed carefully. Insufficient control 
of pests and/or injury to the crop to which the product is applied may result fr om the occurrence of 
extraordinary or unusual weather conditions or the failure to follow the label directions or good application 
practices, all of which are beyond the control of Helena Agri -Enterprises, LLC (the "Company") or seller. 
In addition, failure to follow label directions may cause injury to crops, animals, man or the environment. 
The Company warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purpose referred to in the directions for use subject to the factors noted above which 
are beyond the control of the Company. To the extent consistent with applicable law, the Company 
makes no other warranties or representations of any kind, express or implied, concerning the product, 
including no im plied warranty of merchantability or fitness for any particular purpose, and no such 
warranty shall be implied by law. 
 
To the extent consistent with applicable law, the exclusive remedy against the Company for any cause 
of action relating to the handling or use of this product shall be limited to, at Helena Agri -Enterprises, 
LLC’s election, one of the following: 
 
1. Refund of the purchase price paid by buyer or user for product bought, or 
2. Replacement of the product used

Omni Brand S-Moc 82.4% Safened master label 64 
 
 
To the extent consistent with applicab le law, the Company shall not be liable and any and all claims 
against the Company are waived for special, indirect, incidental, or consequential damages or expense 
of any nature, including, but not limited to, loss of profits or income. The Company and th e seller offer 
this product and the buyer and user accept it, subject to the foregoing conditions of sale and limitation of 
warranty, liability and remedies. 
 
 
© Copyright Helena Holding Company, 2021. 
 
®/™ All other products are trademarks of their respective companies. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[Sublabel 2: Non-Agricultural Uses]
 
 
S-METOLACHLOR GROUP 15 HERBICIDE 
Omni Brand S-Moc 82.4% Safened 
[Alternate Brand Name: Omni Brand S-Moc 82.4%] 
 
Sale, use, and distribution of this product in Nassau and Suffolk Counties in the 
State of New York is prohibited. 
For weed control in nurseries, turf, and landscape plantings. Not for use in commercial turf production. 
Not for homeowner use 
 Active Ingredient: BY WT. 
S-metolachlor (CAS No. 87392-12-9): ................................................................................ 82.4% 
Other Ingredients: ............................................................................................................ 17.6% 
Total: ................................................................................................................................. 100.0%

Omni Brand S-Moc 82.4% Safened master label 65 
 
This product contains 7.64 lbs. active ingredient per gallon. 
This product is formulated as an emulsifiable concentrate (EC). 
EPA Reg. No. 5905-652 
EPA Est. No. 
Net Contents: ___ 
KEEP OUT OF REACH OF CHILDREN 
WARNING 
 FIRST AID 
If in eyes • Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing 
eye. 
• Call a poison control center or doctor for treatment advice. 
If on skin or 
clothing • Take off contaminated clothing. 
• Rinse skin immediately with plenty of water for 15-20 minutes. 
• Call a poison control center or doctor for treatment advice. 
If swallowed • Call a poison control center or doctor immediately for treatment advice. 
• Do not give any liquid to the person. 
• Do not induce vomiting unless told to do so by the poison control center or doctor. 
• Do not give anything by mouth to an unconscious person. 
If inhaled • Move person to fresh air. 
• If person is not breathing, call 911 or an ambulance, then give artificial respiration, 
preferably by mouth-to-mouth, if possible. 
• Call a poison control center or doctor for further treatment advice. 
Have the product container or label with you when calling a poison control center or doctor or going for 
treatment. For medical treatment, call the Rocky Mountain Poison and Drug Safety at 1-866-673-6671. 
FOR CHEMICAL EMERGENCY: Spill, leak, fire, exposure, or accident, call 
CHEMTREC 1-800-424-9300. 
 
PRECAUTIONARY STATEMENTS 
 
Hazards to Humans and Domestic Animals 
WARNING. Causes substantial but temporary eye injury. Harmful if absorbed through skin. Harmful if 
swallowed. Do not get in eyes or on clothing. Wear protective eyewear (goggles, face shield, or safety 
glasses). 
Personal Protective Equipment 
Applicators and other handlers must wear: 
• Long-sleeved shirt and long pants 
• Waterproof gloves 
• Shoes plus socks

Omni Brand S-Moc 82.4% Safened master label 66 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables 
exist, use detergent and hot water. Keep and wash PPE separately from other laundry. 
Engineering Control Statements 
Mixers and loaders supporting aerial applications are required to use closed systems. The closed system 
must be used in a manner that meets the requirements listed in the Worker Protection Standard (WPS) 
for agricultural pesticides [40 CFR 170.607(d)]. When using the closed system, the mixers’ and loaders’ 
PPE requirements may be reduced or modified as specified in the WPS. 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements 
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607(d- f)], the 
handler PPE requirements may be reduced or modified as specified in the WPS. 
User Safety Recommendations 
Users should: 
• Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. 
• Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean 
clothing. 
• Remove PPE immediately after handling this product. Wash the outside of gloves before removing. 
As soon as possible, wash thoroughly and change into clean clothing. 
Environmental Hazards 
Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the 
mean high water mark. Do not contaminate water when disposing of equipment wash water or r insate. 
Reporting Ecological Incidents: to report ecological incidents, including mortality, injury, or harm to plants 
and animals, call 901-761-0050. 
Ground Water Advisory 
S-metolachlor is known to leach through soil into ground water under certain conditions as a result of label 
use. This chemical may leach into ground water if used in areas where soils are permeable, particularly 
where the water table is shallow. 
Surface Water Advisory 
This product may impact surface water quality due to runoff of rain water. This is especially true for poorly 
draining soils and soils with shallow ground water. This product is classified as having high pote ntial for 
reaching surface water via runoff for several weeks or months after application. 
Non-target Organism Advisory 
This product is toxic to plants and may adversely impact the forage and habitat of non- target organisms, 
including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target 
organisms by following label directions intended to minimize spray drift. 
Mixing/Loading Instructions 
When using this product take care to prevent back-siphoning into wells, spills, or improper disposal of 
excess pesticide, spray mixtures, or rinsates. 
Check-valves or anti-siphoning devices must be used on all mixing and/or irrigation equipment. 
This product may not be mixed or loaded within 50 ft. of perennial or intermittent streams and rivers, 
natural or impounded lakes and reservoirs. This product may not be mixed/loaded or used within 50 ft. of 
all wells, including abandoned wells, drainage wells, and sink holes. Operations that involve mixing, 
loading, rinsing, or washing of this product into or from pesticide handling or application equipment or 
containers within 50 ft. of any well are prohibited, unless conducted on an impervious pad constructed to 
withstand the weight of the heaviest load that may be positioned on or m oved across the pad. Such a pad 
shall be designed and maintained to contain any product spills or equipment leaks, container or 
equipment rinse or wash water, and rain water that may fall on the pad. Surface water shall not be

Omni Brand S-Moc 82.4% Safened master label 67 
 
allowed to either flow over or from the pad, which means the pad must be self -contained. The pad shall 
be sloped to facilitate material removal. An unroofed pad shall be of sufficient capacity to contain at a 
minimum 110% of the capacity of the largest pesticide container or application equipment on the pad. A 
pad that is covered by a roof of sufficient size to completely exclude precipitation from contact with the 
pad shall have a minimum containment capacity of 100% of the capacity of the largest pesticide container 
or application equipment on the pad. Containment capacities as described above shall be maintained at 
all times. The above-specified minimum containment capacities do not apply to vehicles when delivering 
pesticide shipments to the mixing/loading sites. 
DIRECTIONS FOR USE 
It is a violation of federal law to use this product in a manner inconsistent with its labeling. 
Endangered Species Protection Requirements: 
It is a Federal offense to use any pesticide in a manner that results in an unauthorized “take” (e.g., kill or 
otherwise harm) of an endangered species and certain threatened species, under the Endangered 
Species Act section 9. When using this product, you must follow the measures contained in the 
Endangered Species Protection Bulletin for the area in which you are applying the product. You must 
obtain a Bulletin no earlier than six months before using this product. To obtain Bulletins, consult 
http://www.epa.gov/espp/, call 1-844-447-3813, or email ESPP@epa.gov. You must use the Bulletin valid 
for the month in which you will apply the product. 
Use Omni Brand S-Moc 82.4% Safened only in accordance directions on this label or in separately 
published EPA accepted supplemental labeling directions for this product. 
Do not apply this product in a way that will contact workers or other persons, either directly or through 
drift. Only protected handlers may be in the area during application. For any requirements specific to your 
State or Tribe, consult the agency responsible for pesticide regulation. 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 
170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, 
and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, 
decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions 
pertaining to the statements on this label about personal protective equipment (PPE) and restricted- entry 
interval. The requirements in this box only apply to uses of this product that are covered by the Worker 
Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 
hours. 
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, such as plants, soil, or water is: 
• Coveralls 
• Chemical-resistant gloves, such as barrier laminate or Viton 
• Shoes plus socks 
 
NON-AGRICULTURAL USE REQUIREMENTS 
The requirements in this box apply to uses of this product that are NOT within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR part 170). The WPS applies when this product is 
used to produce agricultural plants on farms, forests, nurseries, or greenhouses. Do not enter or allow 
others to enter the treated area until sprays have dried. 
 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS LABEL MAY RESULT 
IN POOR WEED CONTROL, CROP INJURY, AND/OR ILLEGAL RESIDUES.

Omni Brand S-Moc 82.4% Safened master label 68 
 
Sale, use, and distribution of this product in Nassau and Suffolk Counties in the State of New York 
is prohibited. 
 
PRODUCT INFORMATION 
 
Omni Brand S-Moc 82.4% Safened controls many annual grasses, certain annual broadleaf weeds, and 
yellow nutsedge. 
Omni Brand S-Moc 82.4% Safened may be used on commercial and residential warm-season turfgrasses 
and other non-crop land, including, but not limited to the following: airports, roadsides, golf courses, 
sports fields, public recreational areas, ornamental gardens, cemeteries, and other landscaped areas. 
Omni Brand S-Moc 82.4% Safened may also be used in and around container and field-grown 
ornamentals, and nonbearing nursery stock. 
DO NOT USE IN GREENHOUSES OR OTHER ENCLOSED STRUCTURES. 
DO NOT apply under conditions which favor runoff or wind erosion of soil containing this product to non-
target areas. 
To prevent off-site movement due to runoff or wind erosion: 
• Avoid treating powdery dry or light sand soils when conditions are favorable for wind erosion. 
Under these conditions, the soil surface should first be settled by rainfall or irrigation. 
• DO NOT apply to impervious substrates such as paved or highly compacted surfaces. 
• DO NOT use tailwater from the first flood or furrow irrigation of treated fields to treat non-
target crops unless at least ½ inch of rainfall has occurred between application and the first 
irrigation. 
NOTICE TO USER: Plant tolerances to Omni Brand S-Moc 82.4% Safened have been found to be acceptable 
in the specific genera and species listed on this label. Because of the large number of species and varieties of 
plants, it is impossible to test each for tolerance to Omni Brand S-Moc 82.4% Safened. Neither the 
manufacturer nor the seller has determined whether or not Omni Brand S-Moc 82.4% Safened can be used 
safely on plants not specified on this label. Therefore, the professional user must determine if Omni Brand S -
Moc 82.4% Safened can be used safely by testing the labeled rates on a particular group of similar unlabeled 
ornamental plants in a small area before widespread use or by checking with the local weed specialist for 
guidance. Likewise, if the professional user plans to apply Omni Brand S-Moc 82.4% Safened for control of 
weed species not listed on this label, Omni Brand S-Moc 82.4% Safened should be tested on a small-scale 
basis before widespread use or the local weed specialist contacted for guidance. 
 
SPRAY DRIFT MANAGEMENT 
MANDATORY SPRAY DRIFT MANAGEMENT 
Ground Boom Applications 
• User must only apply with the release height recommended by the manufacturer, but no more 
than 4 feet above the ground or crop canopy. 
• Applicators are required to select the nozzles and pressure that deliver medium or coarser 
droplets (ASABE S572). 
• Do not apply when wind speeds exceed 15 mph at the application site. 
• Do not apply during temperature inversions. 
Aerial Applications: 
• Do not release spray at a height greater than 10 ft. above the ground or vegetative canopy, 
unless a greater application height is necessary for pilot safety. 
• Applicators are required to select the nozzle and pressure that deliver medium or coarser 
droplets (ASABE S641).

Omni Brand S-Moc 82.4% Safened master label 69 
 
• If the wind speed is 10 miles per hour or less, applicators must use ½ swath displacement 
upwind at the downwind edge of the field. When the wind speed is between 11-15 miles per 
hour, applicators must use ¾ swath displacement upwind at the downwind edge of the field. 
• Do not apply when wind speeds exceed 15 mph at the application site. If the wind speed is 
greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing 
aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must 
be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for 
helicopters. 
• Do not apply during temperature inversions. 
Boomless Ground Applications: 
• Applicators are required to select the nozzle and pressure that deliver a medium or coar ser 
droplet size (ASABE S572.3) for all applications. 
• Do not apply when wind speeds exceed 15 mph at the application site. 
• Do not apply during temperature inversions. 
 
SPRAY DRIFT ADVISORIES 
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF 
NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS. 
Boomless Ground Applications: 
 • Setting nozzles at the lowest effective height will help to reduce the potential for spray drift. 
IMPORTANCE OF DROPLET SIZE 
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide 
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be 
greater if applications are made improperly or under unfavorable environmental conditions. 
Controlling Droplet Size – Ground Boom 
• Volume – Increasing the spray volume so that larger droplets are produced will reduce spray drift. 
Use the highest practical spray volume for the application. If a greater spray volume is needed, 
consider using a nozzle with a higher flow rate. 
• Pressure – Use the lowest spray pressure recommended for the nozzle to produce the target 
spray volume and droplet size. 
• Spray Nozzle – Use a spray nozzle that is designed for the intended application. Consider using 
nozzles designed to reduce drift. 
Controlling Droplet Size – Aircraft 
 • Adjust Nozzles – Follow nozzle manufacturers’ recommendations for setting up nozzles. 
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. 
BOOM HEIGHT – Ground Boom 
For ground equipment, the boom should remain level with the crop and have minimal bounce. 
RELEASE HEIGHT – Aircraft 
Higher release heights increase the potential for spray drift. 
SHIELDED SPRAYERS 
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify 
that the shields are not interfering with the uniform deposition of the spray on the target area. 
TEMPERATURE AND HUMIDITY 
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

Omni Brand S-Moc 82.4% Safened master label 70 
 
TEMPERATURE INVERSIONS 
Drift potential is high during a temperature inversion. Temperature inversions are characterized by 
increasing temperature with altitude and are common on nights with limited cloud cover and light to no 
wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a 
ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated 
cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly 
dissipates indicates good vertical air mixing. Avoid applications during temperature inversions. 
WIND 
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND 
CONDITIONS. 
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift. 
Herbicide Resistance Management 
For resistance management, Omni Brand S-Moc 82.4% Safened is a Group 15 herbicide. Any weed 
population may contain or develop plants naturally resistant to Omni Brand S-Moc 82.4% Safened and 
other Group 15 herbicides. 
Weed species with acquired resistance to Group 15 may eventually dominate the weed population if 
Group 15 herbicides are used repeatedly in the same field. Appropriate resistance-management 
strategies should be followed. 
 
To delay herbicide resistance, take one or more of the following steps: 
• Rotate the use of Omni Brand S-Moc 82.4% Safened or other Group 15 herbicides within a 
growing season sequence or among growing seasons with different herbicide groups that control 
the same weeds in a field. Whenever possible incorporate multiple weed control practices 
including mechanical cultivation, biological management practices, and crop rotation. 
• Use tank mixtures with herbicides from a different group if such use is permitted; where 
information on resistance in target weed species is available, use the less resistance- prone 
partner at a rate that will control the target weed(s) equally as well as the more resistance- prone 
partner. Consult your local extension service or certified crop advisor if you are unsure as to 
which active ingredient is currently less prone to resistance. 
• Adopt an integrated weed-management program for herbicide use that includes scouting and 
uses historical information related to herbicide use and crop rotation, and that considers tillage (or 
other mechanical control methods), cultural (e.g. higher crop seeding rates; precision fertilizer 
application method and timing to favor the crop and not the weeds), biological (weed- competitive 
crops or varieties) and other management practices. 
• Scout fields before application to identify the weed species present and their growth stage to 
determine if the intended application will be effective. Scout after herbicide application to monitor 
weed populations for early signs of resistance development. Indicators of possible herbicide 
resistance include: (1) failure to control a weed species normally controlled by the herbicide at the 
dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non-
controlled plants of a particular weed species; (3) surviving plants mixed with controlled 
individuals of the same species. If resistance is suspected, prevent weed seed production in the 
affected area by an alternative herbicide from a different group or by a mechanical method 
including hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning 
harvesting and tillage equipment when moving between fields, and planting clean seed. 
• If a weed pest population continues to progress after treatment with this product, discontinue use 
of this product and switch to another management strategy or herbicide with a different mode of 
action (MOA), if available. Treat weed escapes with an herbicide with a different MOA or use 
nonchemical methods to remove escapes. To the extent possible do not allow weed escapes to 
produce seeds, roots, or tubers. 
• Contact your local sales representative, crop advisor, or extension agent to find out if suspected 
resistant weeds to this MOA have been found in your region. If resistant biotypes of target weeds 
have been reported, use the application rates of this product specified for your local conditions. 
Tank mix products so that there are multiple effective mechanisms of action for each target weed. 
 
APPLICATION PROCEDURES

Omni Brand S-Moc 82.4% Safened master label 71 
 
Ground Application: Apply Omni Brand S-Moc 82.4% Safened alone or in tank mixtures by ground 
equipment in a minimum of 10 gal of spray mixture per acre, unless otherwise specified. 
Use sprayers that provide accurate and uniform application. For Omni Brand S-Moc 82.4% Safened tank 
mixtures with wettable powder or dry flowable formulations, screens and strainers s hould be no finer than 
50mesh. Rinse sprayer thoroughly with clean water immediately after use. 
Calculate the amount of herbicide needed for band treatment by the following formula: 
 
 band width in inches broadcast rate amount needed 
 X = 
 row width in inches per acre per acre of field 
Avoid application to humans or animals. Flagmen and loaders should avoid inhalation of spray mist and 
prolonged contact with skin. 
Sensitive Areas 
The pesticide must only be applied when the potential for drift to adjacent sensitive areas (e.g., residential 
bodies of water, known habitat for threatened or endangered species, non-target crops) is minimal (e.g., 
when wind is blowing away from the sensitive areas). 
Overhead or Microjet Irrigation Application: Omni Brand S-Moc 82.4% Safened alone or in tank 
mixture with other herbicides which are registered for overhead or microjet application may be applied in 
irrigation water at labeled rates. Apply this product only through an overhead or microjet irrigation syst em. 
Crop injury or lack of effectiveness can result from non-uniform distribution of treated water. If you have 
questions about calibration, contact State Extension specialists, equipment manufacturers, or other 
experts. A person knowledgeable of the chemigation system and responsible for its operation, or under 
the supervision of the responsible person, shall shut the system down and make necessary adjustments 
should the need arise. 
Restrictions 
• DO NOT apply this product through any other type of irrigation system. 
• DO NOT connect an irrigation system (including greenhouse systems) used for pesticide 
application to a public water system, unless the pesticide label-prescribed safety devices for 
public water systems are in place. 
Operation Instructions 
• The system must contain a functional check-valve, vacuum relief valve, and low pressure 
drain appropriately located on the irrigation pipeline to prevent water-source contamination 
from backflow. 
• The pesticide injection pipeline must contain a functional, automatic, quick-closing check-
valve to prevent the flow of fluid back toward the injection pump. 
• The pesticide injection pipeline must also contain a functional, normally closed, solenoid-
operated valve located on the intake side of the injection pump and connected to the system 
interlock to prevent fluid from being withdrawn from the supply tank when the irrigation 
system is either automatically or manually shut down. 
• The system must contain functional interlocking controls to automatically shut off the 
pesticide injection pump when the water pump motor stops. 
• The irrigation line or water pump must include a functional pressure switch which will stop the 
water pump motor when the water pressure decreases to the point where pesticide 
distribution is adversely affected. 
• Systems must use a metering pump, such as a positive displacement injection pump (e.g., 
diaphragm pump), effectively designed and constructed of materials that are compatible with 
pesticides and capable of being fitted with a system interlock. 
• DO NOT apply when wind speed favors drift beyond the area intended for treatment.

Omni Brand S-Moc 82.4% Safened master label 72 
 
• Prepare a mixture with a minimum of 1 part water to 1 part herbicide(s) and inject this mixture 
into the overhead or microjet system. Injecting a larger volume of a m ore dilute mixture per 
hour will usually provide more accurate calibration of metering equipment. Maintain sufficient 
agitation to keep the herbicide in suspension. 
• Meter into irrigation water during entire period of water application. 
• Apply in 1/2-1 inch of water. Use the lower water volume (1/2 inch) on coarse-textured soils 
and the higher volume (1 inch) on fine-textured soils. More than 1 inch of water at application 
may reduce weed control by moving the herbicide below the effective zone in the soil. 
Precaution for overhead or microjet applications: Where sprinkler distribution patterns do not overlap 
sufficiently, unacceptable weed control may result. Where sprinkler distribution patterns overlap 
excessively, injury to desirable plants may result. 
Dry Bulk Granular Fertilizers 
Dry bulk granular fertilizers may be impregnated or coated with Omni Brand S-Moc 82.4% Safened alone 
or with selected Omni Brand S-Moc 82.4% Safened tank mixtures provided that they are registered and 
not prohibited from use on dry bulk granular fertilizers. 
When applying Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened mixtures with 
dry bulk granular fertilizers, follow all directions for use, restrictions, and precautions on the respective 
product labels regarding target crops, rates, soil texture, application methods (including timing of 
application), and rotational crops restrictions. 
Compliance with all individual state regulations relating to dry bulk granular fertilizer blending, registration, 
labeling, and application is the responsibility of the individual and/or company selling the 
herbicide/fertilizer mixture. 
Prepare the granular herbicide/fertilizer mixtures by using any commonly used dry bulk fertilizer blender 
(such as, closed drum, belt, or ribbon). Nozzles used to spray Omni Brand S-Moc 82.4% Safened or 
Omni Brand S-Moc 82.4% Safened tank mixtures onto the fertilizer must be placed to provide uniform 
spray coverage. Take care to aim the spray directly onto the fertilizer only and to avoid s praying the walls 
of the blender. 
If the herbicide/fertilizer mixture is too wet, use a highly absorptive material, such as Agsorb ® granules, 
Microcel E (Johns-Manville Products Corporation), diatomaceous earth, or finely powdered clay, to obtain 
a dry free-flowing mixture. Add the absorptive material separately and uniformly to the herbicide/fertilizer 
mixture and blend to form a suitable free-flowing mixture. Generally, less than 2% by weight of absorptive 
material will be needed. Avoid using more than 5% absorptive material by weight. 
Calculate amounts of Omni Brand S-Moc 82.4% Safened and other herbicides needed by the following 
formula: 
 2,000 pt./A of liquid or pt of liquid or flowable 
 X = 
 lbs. of fertilizer per acre flowable product product per ton of fertilizer 
 
 2,000 lb./A of lbs. of dry product 
 X = 
 lbs. of fertilizer per acre dry product per ton of fertilizer 
 
Restrictions 
To avoid potential for explosion: 
• DO NOT impregnate Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened 
mixtures on ammonium nitrate, potassium nitrate, or sodium nitrate, either alone or in blends with 
other fertilizers.

Omni Brand S-Moc 82.4% Safened master label 73 
 
• DO NOT combine mixtures of Omni Brand S-Moc 82.4% Safened plus any other herbicide with 
single superphosphate (0-20-0) or triple superphosphate (0-46-0). 
• DO NOT use Omni Brand S-Moc 82.4% Safened or Omni Brand S-Moc 82.4% Safened mixtures 
on straight limestone, since absorption will not be achieved. Fertilizer blends containing limestone 
can be impregnated. 
Application 
Apply 100-800 lbs. of the herbicide/fertilizer mixture per acre. For best results, apply the mixture 
uniformly to the soil with properly calibrated equipment immediately after blending. Uniform application of 
the herbicide/fertilizer mixture is essential to prevent possible crop injury. Non-uniform application may 
also result in unsatisfactory weed control. In areas where conventional tillage is practiced, a shallow 
incorporation of the mixture into the soil may improve weed control. On fine- or medium-textured soils in 
areas where soil incorporation is not planned, i.e., reduced tillage situations or in some conventional 
tillage situations, make applications approximately 30 days before planting to allow moisture to move the 
herbicide/fertilizer mixture into the soil. On coarse-textured soils, make applications approximately 14 
days prior to planting. 
Precaution 
• To avoid potential injury of ornamental plants, do not use the herbicide/fertilizer mixture on 
container-grown plants and where planting beds are being formed. 
 
MIXING INSTRUCTIONS 
 
Omni Brand S-Moc 82.4% Safened Alone: Mix Omni Brand S-Moc 82.4% Safened with water or fluid 
fertilizer and apply as a spray. Fill the spray tank ½-¾ full with water or fluid fertilizer, start agitation, add 
the proper amount of Omni Brand S-Moc 82.4% Safened, then add the rest of the water or fluid fertilizer. 
Agitate continuously during mixing and application to maintain a uniform spray mixture. 
Tank Mixtures 
When using Omni Brand S-Moc 82.4% Safened in a tank mixture, it is the pesticide user’s responsibility to 
ensure that all products are registered for the intended use. Read and follow the applicable restrictions 
and limitations and directions for use on all product labels involved in tank mixing. Us ers must follow the 
most restrictive directions for use and precautionary statements of each product in the tank mixture. 
Follow this order: 
1. Fill the spray tank ¼ full with water or fluid fertilizer and start agitation. 
2. Next add all products packaged in water-soluble bags first and at the same time. These products 
must be mixed in clean water only (pre-slurry in water when fertilizer is the main carrier). 
Continue agitation. 
3. Next add water-dispersible granules (WG formulations). Allow the granules to disperse. 
4. Add any wettable powder (WP) formulations to the tank as agitation continues. 
5. Add spray adjuvants and spray markers, if needed. Use additives approved for application to turf 
and ornamentals. Check additive label before use. 
6. Add flowable liquids (L) or suspension concentrates (SC). 
7. Add Omni Brand S-Moc 82.4% Safened to the spray tank last. 
8. Add the remaining water or fluid fertilizer. Maintain agitation in the spray tank until all of the 
solution has been applied. For each mixture, check compatibility with fluid fertilizer, as 
described below, before mixing in spray tank. For all tank mixtures, agitate during mixing and 
application to maintain a uniform suspension. 
Precaution: Before using Omni Brand S-Moc 82.4% Safened in a tank mix with fluid fertilizer or other 
registered pesticides, determine the tolerance of the plant species by applying the combination to a 
limited area during a period of active growth. DO NOT use fluid fertilizers as a carrier for applications 
to container-grown ornamentals. 
Compatibility Test: Check compatibility with herbicide(s) each time before use, using the 
procedure below. Be especially careful when using complete suspension or fluid fertilizers, as serious 
compatibility problems are more likely to occur. Commercial application equipment may improve

Omni Brand S-Moc 82.4% Safened master label 74 
 
compatibility in some instances. The following test assumes a spray volume of 25 gal ./A. For other spray 
volumes, make appropriate changes in the ingredients. 
Add 1 pt. of carrier (water or fertilizer) to each of 2 one-qt. jars with tight lids. Use the same source of 
water that will be used for the tank mix and conduct the test at the temperature the tank mix will be 
applied. 
To one of the jars, add ¼ tsp. or 1.2 milliliters of a compatibility agent approved for this use, such as 
Compex® or Unite® (¼ tsp. is equivalent to 2.0 pts./100 gals. spray). Shake or stir gently to mix. 
To both jars, add the appropriate amount of herbicide(s) in their relative proportions based on label 
rates. If more than one herbicide is used, add them separately with dry herbicides first, flowables 
next, and emulsifiable concentrates last. After each addition, shake or stir gently to thoroughly mix. 
The appropriate amount of herbicides for this test follows: 
Dry herbicides: For each pound to be applied per acre, add 1.5 level teaspoons to each jar. 
Liquid herbicides: For each pint to be applied per acre, add 0.5 teaspoon or 2.5 milliliters to each 
jar. 
After adding all ingredients, put lids on and tighten, and invert each jar 10 tim es to mix. Let the 
mixtures stand 15 - 30 minutes and then look for separation, large flakes, precipitates, gels, heavy 
oily film on the jar, or other signs of incompatibility. Determine if the compatibility agent is needed in 
the spray mixture by comparing the two jars. If either mixture separates, but can be readily remixed, 
the mixture can be sprayed as long as good agitation is used. If the mixtures are incompatible, test 
the following methods of improving compatibility: (a) slurry the dry herbicide(s) in water before 
addition, or (b) add ½ of the compatibility agent to the water or fertilizer and the other ½ to the 
emulsifiable concentrate or flowable herbicide before the addition to the mixture. If incompatibility is 
still observed, do not use the mixture. 
After compatibility testing is complete, dispose of any pesticide wastes in accordance with the 
Storage and Disposal section in this label. 
 
USE DIRECTIONS 
 
Nurseries and Landscape Plantings 
Apply Omni Brand S-Moc 82.4% Safened at rates indicated below to control many annual grasses, 
certain broadleaf weeds, and yellow nutsedge (see following list). Calibrate applicator equipment before 
use according to the manufacturer’s directions. 
Weeds Controlled 
annual bluegrass foxtail, giant red rice 
barnyardgrass (watergrass) foxtail, green sandbur* 
black nightshade foxtail, yellow seedling johnsongrass* 
carpetweed foxtail millet shattercane* 
common purslane* galinsoga signalgrass (Brachiaria) 
crabgrass goosegrass southwestern cupgrass 
crowfootgrass groundsel* witchgrass 
doveweed hairy nightshade* yellow nutsedge 
fall panicum pigweed volunteer sorghum* 
Florida pusley prairie cupgrass 
*Control of these weeds can be erratic due partially to variable weather conditions. 
Application 
Apply Omni Brand S-Moc 82.4% Safened in sufficient carrier to obtain thorough coverage. For liquid 
carriers, use a minimum of 10 gal./A. Apply before emergence of grass, broadleaf weeds, or yellow 
nutsedge, or after existing weeds or nutsedge plants have been removed. A second application may be 
needed to provide longer weed control but may not exceed a total of 4.2 pts./A (1.5 fl. oz. or 46 ml/1,000 
sq. ft.) per year or crop cycle, whichever is less.

Omni Brand S-Moc 82.4% Safened master label 75 
 
Rates of Omni Brand S-Moc 82.4% Safened 
Soil Texture Pt./A Fl. oz./1,000 sq. ft. ml/1,000 sq. ft. 
COARSE 1.3-2.0 0.4 – 0.7 14-21 
MEDIUM 1.3-2.0 0.4 – 0.7 14-21 
FINE 2.0-2.6 0.7 – 0.9 21-28 
 
Use higher rates for a given soil texture on high organic matter soils and where yellow nutsedge and/or a 
heavy infestation of weeds is expected. Use the lower rates on soils with low organic matter content and 
where light infestations of weeds are expected. In peat and muck soils and soils highly enriched with 
organic matter (i.e., sawdust) and/or synthetic mixes, the activity of Omni Brand S -Moc 82.4% Safened 
may be reduced. 
If banded applications are used, refer to the Product Information section of this label to calculate the 
amount of Omni Brand S-Moc 82.4% Safened needed. 
Precautions 
• To avoid plant injury, do not apply Omni Brand S-Moc 82.4% Safened to seedbeds, cutting beds, 
or unrooted cuttings before transplanting or to plants until the soil has firmly settled around roots. 
• When Omni Brand S-Moc 82.4% Safened is applied broadcast over-the-top of plant foliage, 
follow with sufficient overhead irrigation to wash Omni Brand S-Moc 82.4% Safened from the 
foliage to reduce the chance of injury. 
 
Omni Brand S-Moc 82.4% Safened has been found to be safe on the following 
plants: 
Container-Grown Plants 
Common Name Scientific Name 
Azalea, Catawba Rhododendron catawbiense 
Azalea, Formosa/Indica Rhododendron indica 
Azalea, Kurume Rhododendron obtusum 
Beard-Tongue Penstemonn x Mexicali 
Boxwood Buxus spp. 
Candytuft Iberis sempervirens 
Carex Carex spp. 
Cotoneaster Cotoneaster spp. 
Dogwood Cornus spp. 
Eastern Red Cedar Juniperus virginiana 
English Ivy Hedera helix 
English Lavender Lavandula augustifolia 
Euonymus Euonymus fortune 
Euonymus, Manhattan Euonymus kiautschovicus

Omni Brand S-Moc 82.4% Safened master label 76 
 
Flax Phormium colinsoi 
Forsythia Forsythia spp. 
Gardenia Gardenia jasminoides 
Golden Rockets Ligularia stenocephala 
Green Liriope Liriope spicata 
Hick’s Juniper/Foemina Juniperus sabina 
Holly, Dwarf Burford Ilex cornuta 
Holly, Japanese Ilex crenata 
Holly, Savannah Ilex attenuate 
Hosta, Variegated Hosta lancifolia 
Japanese Pachysandra Pachysandra terminalis 
Juniper Juniperus horizontalis 
Juniper, Chinese Juniperus chinensis 
Leucothoe Leucothoe fontanesiana 
Ligustrum or Privet Ligustrum japonicum 
Liriope Liriope mascara 
Mondo Grass Ophiopogon japonicas 
Mountain Laurel Kalmia spp. 
Pine, Japanese Black Pinus thunbergii 
Pine, White Pinus strobes 
Pittosporum Pittosporum tobira 
Poker Plant Kniphofia uvaria 
Prickly Pear Cactus Opuntia humifusa 
Red Maple Acer rubrum 
River Birch Betula nigra 
Shrub verbena Lantana spp. 
Switchgrass Panicum virgatum 
Wax Myrtle Myrica cerifera 
Willow Oak Quercus phellos 
 
Field and Liner Grown Plants (plants transplanted normally in rows in a nursery or similar area for 
further growth before transplanting to final growing location/place of establishment) 
Plants in Landscape Settings 
Common Name Scientific Name

Omni Brand S-Moc 82.4% Safened master label 77 
 
Abelia, Glossy Abelia spp. 
African Lily Agapanthus africanus 
Ajuga Ajuga reptans 
Allium Allium spp. 
Allyssum Allyssum spp. 
Annual Statice Statice sinnata 
Arborvitae Thuja spp. 
Ash Fraxinus spp. 
Aster Aster spp. 
Aucuba Aucuba spp. 
Bald Cypress Taxodium distichum 
Bamboo Nandina domestica 
Barberry Berberis spp. 
Beard-Tongue Penstemon x mexicali 
Bellflower Campanula carpatica 
Birch Betula spp. 
Blue Ageratum Ageratum spp. 
Bougainvillea Bougainvillea spp. 
Boxwood Buxus spp. 
Camellia Camellia spp. 
Candytuft Iberis sempervirens 
Canna Lily Canna indica 
Carex Carex spp. 
Carolina Jessamine Gelsemium sempervirens 
Cherry* Prunus spp.* 
Chrysanthemum, Daisy Chrysanthemum spp. 
Citrus* Citrus spp.* 
Cleyera Ternstoemia gymanathera 
Columbine Aquilegia spp. 
Coreopsis Coreopsis spp. 
Cotoneaster Cotoneaster spp.

Omni Brand S-Moc 82.4% Safened master label 78 
 
Crabapple, Apple* Malus spp. 
Crepe Myrtle Lagerstroemia spp. 
Crocus Crocus spp. 
Daylily Hemerocallis spp. 
Delphinium Delphinium spp. 
Dogwood Cornus spp. 
Douglas Fir Pseudotsuga menziesii 
Dusty Miller Artemesia stoleriana 
Eleagnus Eleagnus spp. 
Endymion Endymion spp. 
English Ivy Hedera spp. 
English Lavender Lavandula augustifolia 
Escallonia Escallonia fradesii 
Euonymus Euonymus spp. 
Fig Ficus spp. 
Fir Abies spp. 
Firethorn Pyracantha spp. 
Flax Phormium colinsoi 
Forsythia Forsythia spp. 
Fortnight Lily Morea spp. 
Gaillardia Gaillardia spp. 
Gardenia Gardenia jasminoides 
Gazania Gold Rush Gazania splendoens 
Geranium Geranium spp. 
Geranium Pelargonium x hortorum 
Geum Geum spp. 
Gingko Gingko biloba 
Gladiolus Gladiolus x hortulanus 
Golden Rockets Ligularia stenocephala 
Goldenrod Solidago sempervirens 
Hemlock Tsuga spp. 
Hens and Chicks Sempervivum tectorum 
Hibiscus Hibiscus spp. 
Holly Ilex spp. 
Honey Locust Gleditsia triacanthos

Omni Brand S-Moc 82.4% Safened master label 79 
 
Honeysuckle Lonicera spp. 
Hosta Hosta lancifolia 
Hyacinth Hyacinthus spp. 
Hydrangea Hydrangea spp. 
Ice Plant Cryophytum crystallium 
Ice Plant Mesembryanthemum crystallinum 
Impatiens Impatiens spp. 
Indian Hawthorne Raphiolepis spp. 
Iris Iris spp. 
Ironweed Vernonia noveboracensis 
Japanese Andromeda Pieris japonica 
Jasmine Jasmine spp. 
Juniper Juniperus spp. 
Kalmia Kalmia spp. 
Leatherleaf Fern Rumohra adiantiformis 
Leopard’s-bane Senecio doronicum 
Leucothoe Leucothoe spp. 
Lilac Syringa spp. 
Lily Lilium spp. 
Liriope Liriope spp. 
Locust Robinia spp. 
Loosestrife Lythrum spp. 
Lupines Lupinus spp. 
Magnolia Magnolia spp. 
Maple Acer spp. 
Marigold Tagetes spp. 
Mexican Fan Palm Washingtonia robusta 
Mexican petunia Ruellia carolinensis 
Milkweed Asclepias spp. 
Mondo Grass Ophiopogon japonicas 
Muscari Muscari armeniacum 
Narcissus Narcissus spp. 
Ninebark Physocarpus spp. 
Oak Quercus spp. 
Oleander Nerium oleander

Omni Brand S-Moc 82.4% Safened master label 80 
 
Osmanthus Osmanthus spp. 
Pachysandra Pachysandra spp. 
Pampas Grass Cortaderia selloana 
Pansy Viola x Wittrockiana 
Pear* Pyrus spp.* 
Periwinkle Vinca spp. 
Petunia Petunia spp. 
Phlox Phlox spp. 
Photinia Photinia spp. 
Physostegia Physostegia spp. 
Pine Pinus spp. 
Pittosporum Pittosporum spp. 
Podocarpus Podocarpus spp. 
Poker Plant Kniphofia uvaria 
Poplar Populus spp. 
Potentilla (Cinquefoil) Potentilla spp. 
Prickly Pear Cactus Opuntia humifusa 
Primrose Oenothera spp. 
Privet Ligustrum spp. 
Queen Anne’s Lace Daucus carota 
Rhododendron/Azalea Rhododendron spp. 
Rose Rosa spp. 
Scilla Scilla spp. 
Shrub Verbena Lantana spp. 
Snapdragon Antirrhinum majus 
Snowberry Symphoricarpos spp. 
Spicebush Illicium spp. 
Spiraea Spiraea spp. 
Spruce Picea spp. 
St. John’s Wort Hypericum spp. 
Stachys Stachys spp. 
Star of Bethlehem Ornithogalum umbellatum 
Stone Crop Sedum spp. 
Sweet Broom Cytisus racemosus

Omni Brand S-Moc 82.4% Safened master label 81 
 
Sweet William Dianthus barbatus 
Sweetgum Liquidambar spp. 
Switchgrass Panicum virgatum 
Tulip Tulipa spp. 
Tulip Tree Liriodendron tulipifera 
Veronica Veronica spp. 
Viburnum Viburnum spp. 
Wax Myrtle Myrica spp. 
Weigela Weigela spp. 
Willow Salix spp. 
Wisteria Wisteria senensis 
Yarrow Achillea spp. 
Yew Taxus spp. 
Yucca Yucca spp. 
Zinnia Zinnia spp. 
*DO NOT apply to trees or plants that will bear harvestable fruit within 12 months, or illegal residues may 
result. 
Omni Brand S-Moc 82.4% Safened may be applied in tank mixtures with other compatible herbicides 
registered for use on ornamentals. Refer to the respective product labels for weeds controlled and for 
plants on which they are registered for use. When applying Omni Brand S-Moc 82.4% Safened in tank 
mixtures, observe the more restrictive directions for use, precautions, restrictions, and limitations on this 
label or the respective tank mix product label. 
Restrictions: 
• DO NOT apply more than 2.6 pts./A (2.4 lbs. ai/A) in a single application. 
• DO NOT apply more than 4.2 pts./A (4.0 lbs. ai/A) in a year. 
• DO NOT make more than 2 applications per year (not to exceed 4.2 pts./A (4.0 lbs. ai/A) per 
year). 
 
 STORAGE AND DISPOSAL 
Do not contaminate water, food, or feed by storage or disposal. 
Pesticide Storage 
This product may be stored at temperatures down to 30 degrees below 0°F. 
Pesticide Disposal 
Open dumping is prohibited. Wastes resulting from the use of this product are toxic. Improper disposal of 
unused pesticide, spray mixture, or rinsate is a violation of federal law. Pesticide, spray mixture, or rinsate that 
cannot be used according to label instructions must be disposed of according to federal, state, or local 
procedures. For guidance in proper disposal methods, contact your State Pesticide or Environmental Control 
Agency, or the Hazardous Waste Representative at the nearest EPA Regional Office. 
Container Handling [less than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse 
container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into 
application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ 
full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store

Omni Brand S-Moc 82.4% Safened master label 82 
 
rinsate for later use and disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure 
two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. 
For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take 
special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of 
wastes. In the event of a major spill, fire, or other emergency, call 1-800-888-8372, day or night. 
Container Handling [greater than 5 gallons] 
Refillable container. Refill this container with Omni Brand S-Moc 82.4% Safened only. Cleaning the container 
before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is 
the responsibility of the person refilling. To clean container before final disposal, empty the remaining contents 
from this container into application equipment or mix tank. Fill the container about 10 percent full with water. 
Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application 
equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling 
if available or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed 
by state and local authorities. 
Container Handling [greater than 5 gallons] 
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly 
after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. 
Fill the container ¼ full with water. Replace and tighten closures. Tip container on its side and roll it back and 
forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back 
and forth several times. Turn the container over onto its other end and tip it back and forth several times. 
Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat 
this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary 
landfill, or by incineration. 
For minor spills, leaks, etc., follow all precautions indicated on this label and clean up immediately. Take 
special care to avoid contamination of equipment and facilities during cleanup procedures and disposal of 
wastes. 
 
CONDITIONS OF SALE - LIMITED WARRANTY 
AND LIMITATIONS OF LIABILITY AND REMEDIES 
Read the Conditions of Sale - Warranty and Limitations of Liability and Remedies before using 
this product. If the terms are not acceptable, return the product, unopened, and the full 
purchase price will be refunded. 
 
The directions on this label are believed to be reliable and must be followed carefully. Insufficient control 
of pests and/or injury to the crop to which the product is applied may result from the occurrence of 
extraordinary or unusual weather conditions or the failure to follow the label directions or good application 
practices, all of which are beyond the control of Helena Agri -Enterprises, LLC (the "Company") or seller. 
In addition, failure to follow label directions may cause injury to crops, animals, man or the environment. 
The Company warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purpose referred to in the directions for use subject to the factors noted above which 
are beyond the control of the Company. To the extent consistent with applicable law, the Company 
makes no other warranties or representations of any kind, express or implied, concerning the product, 
including no implied warranty of merchant ability or fitness for any particular purpose, and no such 
warranty shall be implied by law. 
 
To the extent consistent with applicable law, the exclusive remedy against the Company for any cause 
of action relating to the handling or use of this product shall be limited to, at Helena Agri -Enterprises, 
LLC’s election, one of the following: 
 
1. Refund of the purchase price paid by buyer or user for product bought, or 
2. Replacement of the product used 
 
To the extent consistent with applicable law, the Company shall not be liable and any and all claims 
against the Company are waived for special, indirect, incident al, or consequential damages or expense 
of any nature, including, but not limited to, loss of profits or income. The Company and the seller offer 
this product and the buyer and user accept it, subject to the foregoing conditions of sale and limitation of 
warranty, liability and remedies.

Omni Brand S-Moc 82.4% Safened master label 83 
 
 
 
© Copyright Helena Holding Company, 2021. 
 
®/™ All other products are trademarks of their respective companies.