crop-chem-docs/corpus/epa_ppls/7969-142.md

# SAN 821 H 600 HERBICIDE

- EPA Reg No: **7969-142**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Warning
- Active ingredients: Dicamba (69.4%)
- Label accepted: 2012-02-22
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00142-20120222.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
WASHINGTON, D.C. 20460
OFFICE OF CHEMICAL SAFETY
AND POLLUTION PREVENTION
Jeffrey Birk
BASF
26 Davis Drive
Research Triangle Park, NC 27709-3528 FE& 2 2 2012-
Subject: Label Amendment / SAN 821 H 600 Herbicide
EPA Reg. No.: 7969-142
Dear Mr. Birk:
The amended labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act, as amended, is acceptable.
Submit one copy of the final printed label for the record before you release the product for shipment. A
stamped copy of the label is enclosed for your records. This label supersedes all previously accepted labels.
If these conditions are not complied with, the registration will be subject to cancellation in accordance with
FIFRA section 6(e). Your release for shipment of the product constitutes acceptance of these conditions. If
you have any questions please call Erik Kraft at 703-308-9358 or email at Kraft.Erik@epa.gov.
Sincerely,
Kathryn Montague
Product Manager 23
Herbicide Branch
Registration Division (7505P)

<
D-BASFThe Chemical Company
SAN 821 H 600herbicide
For weed control in asparagus, conservation reserve programs,
corn, cotton, fallow croplands, farmstead (noncropland),
sorghum, grass grown for seed, hay, proso millet, pasture,
rangeland, small grains (barley, oats, triticale, wheat), sod farm
turf, soybean, and sugarcane
Active Ingredient:
Diglycolamine salt of 3,6-dichloro-o-anisic acid* 69.4%
Other Ingredients: 30.6%
Total 100.0%
"Contains 47.1% 3,6-dichloro-Q-anisic acid (5 pounds acid equivalent per gallon or 600 grams per liter).
EPA Reg No. 7969-142 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
WARNING/AVISO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, find someone to explain it to you in detail.)
See inside booklet for complete First Aid, Precautionary Statements, Directions
For Use, Conditions of Sale and Warranty, and state-specific crop and/or use site
restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation
26 Davis Drive, Research Triangle Park, NC 27709
iz

FIRST AID
If in eyes
If swallowed
If on skin or clothing
• Hold eye open and rinse slowly and gently with water for 1 5 to 20 minutes.
• Remove contact lenses, if present, after first 5 minutes; then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything by mouth to an unconscious person.
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 1 5 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357).
Precautionary Statements
HAZARDS TO HUMANS
AND DOMESTIC ANIMALS
WARNING
Causes substantial but temoporary eye injury. Harmful if
swallowed. Harmful if absorbed through skin. DO NOT get
in eyes or on clothing. Avoid contact with skin.
Personal Protective Equipment (PPE)
Some materials that are chemical-resistant to this product
are made of barrier laminate, nitrile rubber, neoprene
rubber, or viton. If you want more options, follow the
instructions for Category E on an EPA chemical-
resistance category selection chart.
All mixers, loaders, and applicators and other
handlers must wear:
• Long-sleeved shirt and long pants
• Shoes plus socks
• Goggles or faceshield, and
• Chemical-resistant gloves
See Engineering Controls Statement for additional
requirements.
Follow the manufacturer's instructions for cleaning and
maintaining PPE. If no such instructions for washables
exist, use detergent and hot water. Keep and wash PPE
separately from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE require-
ments may be reduced or modified as specified in the
WPS.
Pilots must use cockpits in a manner that meets the
requirements listed in the Worker Protection Standard
(WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6).
User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum,
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon
as possible, wash thoroughly and change into clean
clothing.
Environmental Hazards
DO NOT apply directly to water, or to areas where surface
water is present or to intertidal areas below the mean high
water mark. DO NOT contaminate water when disposing
of equipment washwaters or rinsate. Apply this product
only as directed on the label.
This chemical is known to leach through soil into ground
water under certain conditions as a result of agricultural
use. Use of this chemical in areas where soils are perme-
able, particularly where the water table is shallow, may
result in ground water contamination.
Ground and Surface Water Protection
Point source contamination: To prevent point source
contamination, DO NOT mix, load this pesticide product
within 50 feet of wells (including abandoned wells and
drainage wells), sink holes, perennial or intermittent
streams and rivers, and natural or impounded lakes and
reservoirs. DO NOT apply pesticide product within 50 feet
of wells. This setback does not apply to properly capped
or plugged abandoned wells and does not apply to imper-
vious pad or properly diked mixing/loading areas as
described below.
Mixing, loading, rinsing, or washing operations performed
within 50 feet of a well are allowed only when conducted
on an impervious pad constructed to withstand the weight
of the heaviest load that may be on or move across the
pad. The pad must be self-contained to prevent surface

water flow over or from the pad. The pad capacity must
be maintained at 110% that of the largest pesticide con-
tainer or application equipment used on the pad and have
sufficient capacity to contain all product spills, equipment
or container leaks, equipment wash waters, and rainwater
that may fall on the pad. The containment capacity does
not apply to vehicles delivering pesticide shipments to the
mixing/loading site. States may have in effect additional
requirements regarding wellhead setbacks and operational
containment.
Care must be taken when using this product to prevent:
a) back siphoning into wells, b) spills or c) improper dis-
posal of excess pesticide, spray mixtures or rinsates.
Check valves or antisiphoning devices must be used on all
mixing equipment.
Movement by surface runoff or through soil: DO NOT
apply under conditions which favor runoff. DO NOT apply
to impervious substrates such as paved or highly com-
pacted surfaces in areas with high potential for ground
water contamination. Ground water contamination may
occur in areas where soils are permeable or coarse and
ground water is near the surface. DO NOT apply to soils
classified as sand with less than 3% organic matter and
where ground water depth is shallow. To minimize the
possibility of ground water contamination, carefully follow
the application rates as affected by soil type in the product
information section of this label.
Movement by water erosion of treated soil: DO NOT
apply or incorporate this product through any type of irri-
gation equipment nor by flood or furrow irrigation. Ensure
treated areas have received at least one-half inch rainfall
(or irrigation) before using tailwater for subsequent irriga-
tion of other fields.
Endangered Species Concerns
The use of any pesticide in a manner that may kill or
otherwise harm an endangered species or adversely modi-
fy their habitat is a violation of federal law.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. DO NOT apply this prod-
uct in a way that will contact workers or other persons,
either directly or through drift. Only protected handlers
may be in the area during application. For any require-
ments specific to your state or tribe, consult the agency
responsible for pesticide regulation.
Unless otherwise directed in supplemental labeling, all
applicable directions, restrictions, precautions and
Conditions of Sale and Warranty are to be followed.
This labeling must be in the user's possession during
application.
Agricultural Use Requirements
Use this product only in accordance with its labeling and
with the Worker Protection Standard, 40 CFR part 170.
This Standard contains requirements for the protection
of agricultural workers on farms, forests, nurseries and
greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination,
notification, and emergency assistance. It also contains
specific instructions and exceptions pertaining to the
statements on this label about Personal Protective
Equipment (PPE), and restricted-entry intervals. The
requirements in this box only apply to uses of this prod-
uct that are covered by the WPS.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 24 hours.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that
involves contact with anything that has been treated,
such as, plants, soil, or water is:
• Coveralls worn over short-sleeved shirt and short
pants
• Chemical-resistant footwear plus socks
• Chemical-resistant gloves made of any waterproof
material
• Chemical-resistant headgear for overhead exposure
• Protective eyewear
Nonagricultural Use Requirements
The requirements in this box apply to uses of this prod-
uct that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR
Part 170). The WPS applies when this product is used to
produce agricultural plants on farms, forests, nurseries,
or greenhouses.
DO NOT enter or allow others to enter until sprays have
dried.
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or
disposal. Open dumping is prohibited. This product may
not be mixed, loaded, or used within 50 feet of all wells
including abandoned wells, drainage wells, and sink-
holes.
Pesticide Storage
Groundwater contamination may be reduced by diking
and flooring of permanent liquid bulk storage sites with
an impermeable material. Store in original container in a
well-ventilated area separately from fertilizer, feed, and
foodstuffs. Avoid cross-contamination with other pesti-
cides.
{continued)

STORAGE AND DISPOSAL (continued)
Pesticide Disposal
Wastes resulting from this product may be disposed of
on site or at an approved waste disposal facility.
Pesticide, spray mixture, or rinsate that cannot be used
according to label instructions must be disposed of
according to federal, state or local procedures under
Subtitle C of the Resource Conservation and
Recovery Act. Improper disposal of excess pesticide,
spray mix, or rinsate is a violation of federal law.
Container Handling
Nonrefillable Container. DO NOT reuse or refill this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landfill, or by incin-
eration, or by other procedures approved by state and
local authorities.
Triple rinse containers small enough to shake
(capacity <• 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank
and drain for 10 seconds after the flow begins to drip.
Fill the container 1/4 full with water and recap. Shake for
10 seconds. Pour rinsate into application equipment or a
mix tank, or store rinsate for later use or disposal. Drain
for 10 seconds after the flow begins to drip. Repeat this
procedure two more times.
Triple rinse containers too large to shake
(capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank.
Fill the container 1/4 full with water. Replace and tighten
closures. Tip container on its side and roll it back and
forth, ensuring at least one complete revolution, for
30 seconds. Stand the container on its end and tip it
back and forth several times. Turn the container over
onto its other end and tip it back and forth several
times. Empty the rinsate into application equipment or a
mix tank, or store rinsate for later use or disposal.
Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining
contents into application equipment or mix tank and
continue to drain for 10 seconds after the flow begins to
drip. Hold container upside down over application
equipment or mix tank, or collect rinsate for later use or
disposal. Insert pressure rinsing nozzle in the side of the
container and rinse at about 40 PSI for at least 30 sec-
onds. Drain for 10 seconds after the flow begins to drip.
Refillable Container. Refill this container with pesticide
only. DO NOT reuse this container for any other pur-
pose. Triple rinsing the container before final disposal is
the responsibility of the person disposing of the con-
tainer. Cleaning before refilling is the responsibility of the
refiller.
STORAGE AND DISPOSAL (continued)
Triple rinse as follows: To clean the container before
final disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the
container about 10% full with water. Agitate vigorously
or recirculate water with the pump for 2 minutes. Pour
or pump rinsate into application equipment or rinsate
collection system. Repeat this rinsing procedure two
more times.
When this container is empty, replace the cap and seal
all openings that have been opened during use; return
the container to the point of purchase or to a designat-
ed location. This container must only be refilled with a
pesticide product. Prior to refilling, inspect carefully for
damage such as cracks, punctures, abrasions, worn-out
threads and closure devices. Check for leaks after refill-
ing and before transport. DO NOT transport if this con-
tainer is damaged or leaking. If the container is dam-
aged, or leaking, or obsolete and not returned to the
point of purchase or to a designated location, triple rinse
emptied container and offer for recycling, if available, or
dispose of container in compliance with state and local
regulations.
In Case of Spill
In case of large-scale spillage regarding this product, call:
CHEMTREC 1-800-424-9300
BASF Corporation 1-800-832-HELP (4357)
Steps to be taken in case material is released or
spilled:
Dike and contain the spill with inert material (sand, earth,
etc.) and transfer liquid and solid diking material to sepa-
rate containers for disposal. Remove contaminated cloth-
ing, and wash affected skin areas with soap and water.
Wash clothing before reuse. Keep the spill out of all sew-
ers and open bodies of water.
I. Product Information
SAN 821 H 600 herbicide is a water-soluble formulation
intended for control and suppression of many annual,
biennial, and perennial broadleaf weeds, as well as woody
brush and vines listed in Table 1. SAN 821 H 600 may be
used for control of these weeds in asparagus, corn, cot-
ton, conservation reserve programs, fallow cropland, grass
grown for seed, hay, proso millet, pasture, rangeland,
farmstead (noncropland), small grains, sorghum, soybean,
sugarcane, and turf.
(continued)

I
Table 1. Weed List for Species Controlled or Suppressed by SAN 821 H 600 herbicide,
including ALS-resistant and Triazine-resistant Biotypes,
when used according to label directions
ANNUALS
Alkanel
Amaranth, Palmer, Powell,
Spiny
Aster, Slender
Bedstraw, Catchweed
Beggarweed, Florida
Broomweed, Common
Buckwheat, Tartary, Wild
Buffalobur
Burclover, California
Burcucumber
Buttercup, Corn, Creeping,
Roughseed, Western Field
Carpetweed
Catchfly, Nightflowering
Chamomile, Corn
Chervil, Bur
Chickweed, Common
Clovers
Cockle, Corn, Cow, White
Cocklebur, Common
Copperleaf, Hophornbeam
Cornflower (Bachelor Button)
Croton, Tropic, Woolly
Daisy, English
Dragonhead, American
Eveningprimrose, Cutleaf
Falseflax, Smallseed
Fleabane, Annual
Flixweed
Fumitory
Goosefoot, Nettleleaf
Hempnettle
Henbit
Jacobs-Ladder
Jimsonweed
Knawel (German Moss)
Knotweed, Prostrate
Kochia
Ladysthumb
Lambsquarters, Common
Lettuce, Miners, Prickly
Mallow, Common, Venice
Marestail (Horseweed)
Mayweed
Morningglory, Ivyleaf, Tall
Mustard, Black, Blue, Tansy,
Treacle, Tumble, Wild,
Yellowtops
Nightshade, Black, Cutleaf,
Pennycress, Field (Fanweed,
Frenchweed, Stinkweed)
Pepperweed, Virginia
(Peppergrass)
Pigweed, Prostrate, Redroot
(Carelessweed), Rough,
Smooth, Tumble
Pineappleweed
Poorjoe
Poppy, Red-horned
Puncturevine
Purslane, Common
Pusley, Florida
Radish, Wild
Ragweed, Common, Giant
(Buffaloweed), Lance-Leaf
Rocket, London, Yellow
Rubberweed, Bitter (Bitterweed)
Salsify
Senna, Coffee,
Sesbania, Hemp
Shepherdspurse
Sicklepod
Sida, Prickly (Teaweed)
Smartweed, Green,
Pennsylvania
Sneezeweed, Bitter
Sowthistle, Annual, Spiny
Spanish Needles
Spikeweed, Common
Spurge, Prostrate, Leafy
Spurry, Corn
Starbur, Bristly
Starwort, Little
Sumpweed, Rough
Sunflower, Common (Wild),
Volunteer
Thistle, Russian
Velvetleaf
Waterhemp
Waterprimrose, Winged
Wormwood
BIENNIALS
Burdock, Common
Carrot, Wild (Queen Anne's
Lace)
Cockle, White
Eveningprimrose, Common
Geranium, Carolina
Gromwell
Knapweed, Diffuse, Spotted
Mallow, Dwarf
Plantain, Bracted
Ragwort, Tansy
Starthistle, Yellow
Sweetclover
Teasel
Thistle, Bull, Milk, Musk,
Plumeless
PERENNIALS
Alfalfa1
Artichoke, Jerusalem
Aster, Spiny, Whiteheath
Bedstraw, Smooth
Bindweed, Field, Hedge
Blueweed, Texas
Bursage, Woollyleaf (Bur
Ragweed, Povertyweed)
Buttercup, Tall
Campion, Bladder
Chickweed, Field, Mouseear
Chicory'
Clover', Hop
Dandelion1,
Dock', Broadleaf (Bitterdock),
Curly
Dogbane, Hemp
Dogfennel' (Cypressweed)
Fern, Bracken
Garlic, Wild
Goldenrod, Canada, Missouri
Goldenweed, Common
Hawkweed
Henbane, Black'
Horsenettle, Carolina
Ironweed
Knapweed, Black, Diffuse,
Russian', Spotted
Milkweed, Common,
Honeyvine, Western Whorled
Nettle, Stinging
Nightshade, Silverleaf (White
Horsenettle)
Onion, Wild
Plantain, Broadleaf, Buckhorn
Pokeweed
Ragweed, Western
Redvine
Sericea Lespedeza
Smartweed, Swamp
Snakeweed, Broom
Sorrel1, Red (Sheep Sorrel)
Sowthistle', Perennial
Spurge, Leafy
Sundrop,
Thistle, Canada, Scotch
Toadflax, Dalmatian
Tropical Soda Apple
Trumpetcreeper (Buckvine)
Vetch
Waterhemlock, Spotted
Waterprimrose, Creeping
Woodsorrel', Creeping, Yellow
Wormwood, Louisiana
Yankeeweed
Yarrow, Common'
WOODY SPECIES
Alder
Ash
Aspen
Basswood
Beech
Birch
Blackberry2
Blackgum2
Cedar2
Cherry
Chinquapin
Cottonwood
Creosotebush2
Cucumbertree
Dewberry2
Dogwood2
Elm
Grape
Hawthorn (Thornapple)2
Hemlock
Hickory
Honeylocust
Honeysuckle
Hornbeam
Huckleberry
Huisache
Ivy, Poison
Kudzu
Locust, Black
Maple
Mesquite
Oak
Oak, Poison
Olive, Russian
Persimmon, Eastern
Pine
Plum, Sand (Wild Plum)2
Poplar
Rabbitbrush
Redcedar, Eastern2
Rose2, McCartney, Multiflora
Sagebrush, Fringed2
Sassafras
Serviceberry
Spicebush
Spruce
Sumac
Sweetgunf
Sycamore
Tarbush
Willow
Witcnhazel
Yaupon2
Yucca2
1 Noted perennials may be controlled using lower rates of SAN 821 H 600 than those used for other listed perennial weeds.
2 Growth suppression only; sequential applications may be needed.

Mode of Action
SAN 821 H 600 herbicide is readily absorbed by plants
through shoot and root uptake, translocates throughout
the plant's system, and accumulates in areas of active
growth. SAN 821 H 600 interferes with the plant's growth
hormones (auxins) resulting in death of many broadleaf
weeds.
Resistance Management
SAN 821 H 600 has a low probability of selecting for
resistant weed biotypes.
Cleaning Spray Equipment
Clean application equipment thoroughly by using a strong
detergent or commercial sprayer cleaner, according to the
manufacturer's directions, and then triple rinsing the equip-
ment before and after applying this product.
H. Application Instructions
SAN 821 H 600 can be applied to actively growing weeds
as aerial, broadcast, band, or spot spray applications
using water or sprayable fertilizer as a carrier. For
SAN 821 H 600 application rates for control or suppres-
sion by weed type and growth stage see Table 2. For
crop-specific application timing and other details, refer to
section VI. Crop-specific Information.
To avoid uneven spray coverage, SAN 821 H 600 must
not be applied during periods of gusty wind or when wind
is in excess of 15 mph.
Avoid off-target movement. Use extreme care when apply-
ing SAN 821 H 600 to prevent injury to desirable plants
and shrubs.
Cultivation
DO NOT cultivate within 7 days after applying
SAN 821 H 600.
Sensitive Crop Precautions
SAN 821 H 600 may cause injury to desirable trees and
plants, particularly beans, cotton, flowers, fruit trees,
grapes, ornamentals, peas, potatoes, soybeans,
sunflowers, tobacco, tomatoes, and other broadleaf plants
when contacting their roots, stems, or foliage. These
plants are most sensitive to SAN 821 H 600 during their
development or growing stage.
Directions to avoid herbicide drift
• Use coarse sprays (volume median diameter of
400 microns or more) to avoid potential herbicide drift.
Select nozzles that are designed to produce minimal
amounts of fine spray particles (less than 200 microns).
Examples of nozzles designed to produce coarse sprays
via ground applications are Delavan® Raindrops,
Spraying Systems XR (excluding 110° tips) flat fans,
Turbo Teejets®, Turbo Floodjets", or large capacity
flood nozzles such as D10, TK10, or greater capacity
tips.
• Keep the spray pressure at or below 20 psi and the
spray volume at or above 20 gallons per acre (for ground
broadcast applications), unless otherwise required by the
manufacturer of drift-reducing nozzles. Consult your
spray nozzle supplier concerning the choice of drift-
reducing nozzles.
• Agriculturally approved drift-reducing additives may be
used.
Aerial Application Methods and Equipment
Water Volume: Use 1-10 gallons of water per acre
(2 - 20 gallons of diluted spray per treated acre for
preharvest uses). Use the higher spray volume when treat-
ing dense or tall vegetation.
Application Equipment: Select nozzles designed to pro-
duce minimal amounts of fine spray particles. Make aerial
applications at the lowest safe height to reduce exposing
the spray to evaporation and wind.
Table 2. SAN 821 H 600 Application Rates for Control or Suppression by Weed Type and Growth Stage
Use rate limitations are given in sections V. and VI. Crop-specific Information.
Weed Type and Stage Rate Per Acre
(fl ozs) Weed Type and Stage Rate Per Acre
(fl ozs)
Annual'
Small, actively growing
Established weed growth
6.4 to 12.8
12.8 to 19.2
Perennial
Top growth suppression
Top growth control and root suppression
Noted perennials (footnote 1 in Table 1)
Other perennials3'"
6.4 to 12.8
12.8 to 25.6
25.6 to 51.2
51.2
Biennial
Rosette diameter 1 - 3"
Rosette diameter 3" or more
Bolting
Woodv Brush & Vines
6.4 to 12.8
12.8 to 25.6
25.6
Top growth suppression
Top growth control"
Stems and stem suppression1'
12.8 to 25.6
25.6 to 51.2
51.2
1 Rates below 8 fluid ounces per acre may provide control or suppression but should typically be applied with other herbicides that are
effective on the same species and biotype.
2 Species noted in Table 2 will require tank mixes for adequate control.
3 DO NOT broadcast apply more than 25.6 fluid ounces per acre per application. Use the higher level of listed rate ranges when
treating dense vegetative growth or perennial weeds with well-established root growth. Rates higher than 25.6 fluid ounces per
acre are for spot treatment only. DO NOT exceed 51.2 fluid ounces per acre per year.
' Sequential applications may be required not to exceed single application maximum rate.

The applicator must follow the most restrictive use cau-
tions to avoid drift hazards, including those found in this
labeling, as well as state and local regulations and ordi-
nances.
DO NOT use aerial equipment if spray particles can be
carried by the wind into areas where sensitive crops or
plants are growing or when temperature inversions exist.
Ground Application (Banding)
When applying SAN 821 H 600 herbicide by banding,
determine the amount of herbicide and water volume
needed using the following formula:
Bandwidth in inches
Row width in inches
Broadcast rate
per acre
Banding herbicide
rate per acre
Bandwidth in inches
Row width in inches
Broadcast
volume per acre
Banding water
volume per acre
Ground Application (Broadcast)
Water Volume: Use 3 - 50 gallons of spray solution per
broadcast acre for optimal performance. Use the higher
spray volume when treating dense or tall vegetation.
Application Equipment: Select nozzles designed to pro-
duce minimal amounts of fine spray particles. Spray with
nozzles as close to the weeds as is practical for good
weed coverage.
Ground Application (Wipers)
SAN 821 H 600 may be applied through wiper application
equipment to control or suppress actively growing
broadleaf weeds, brush, and vines. Use a solution contain-
ing 1 part SAN 821 H 600 to 1 part water. DO NOT con-
tact desirable vegetation with herbicide solution. Wiper
application may be made to crops (including pastures) and
non-cropland areas described in this label with the excep-
tion of cotton, sorghum, and soybean.
III. Additives
To improve postemergence weed control, agriculturally
approved surfactants, sprayable fertilizers (urea ammonium
nitrate, or ammonium sulfate), or crop oil concentrate may
be added, particularly in dry growing conditions. (Refer to
Table 3. Additive Rate Per Acre.)
Nitrogen Source
• Urea ammonium nitrate (UAN): Use 2 - 4 quarts of
UAN (commonly referred to as 28%, 30%, or 32% nitro-
gen solution) per acre. DO NOT use brass or aluminum
nozzles when spraying UAN.
• Ammonium sulfate (AMS): AMS at 2.5 pounds per
acre may be substituted for UAN. Use high-quality AMS
(spray grade) to avoid plugging of nozzles. Other
sources of nitrogen are not as effective as those men-
tioned. BASF does not recommend applying AMS, if
applied in less than 10 gallons per acre because of
potential problems with precipitation in reduced volumes.
Use AMS only if it has been demonstrated to be suc-
cessful in local experience.
Nonionic Surfactant
The standard label recommendation is 1 pint of an
80% active nonionic spray surfactant per 100 gallons of
water. For certain weeds, a higher spray surfactant rate is
recommended.
Oil Concentrate
A crop oil concentrate must contain either a petroleum or
vegetable oil base and must meet all of the following
criteria:
• be nonphytotoxic,
• contain only EPA-exempt ingredients,
• provide good mixing quality in the jar test, and
• be successful in local experience.
The exact composition of suitable products will vary; how-
ever, vegetable and petroleum oil concentrates should
contain emulsifiers to provide good mixing quality. Highly
refined vegetable oils have proven more satisfactory than
unrefined vegetable oils. For additional information, see
Compatibility Test for Mix Components.
Adjuvants containing crop oil concentrates may be used in
preplant, preemergence, and preharvest application, as
well as in pastures and noncropland. DO NOT use crop
oil concentrate for postemergence in-crop applications
unless specifically allowed in section VI. Crop-specific
Information of this label.
Table 3. Additive Rate Per Acre
Additive
Nonionic Surfactant
AMS
UAN Solution
Crop Oil Concentrate
'see manufacturer's label for spec
Rate Per Acre
1 - 2 pints per 100 gallons
2.5 pounds
2 - 4 quarts
1 quart*
fie rate instructions.
Compatibility Test for Mix Components
Before mixing components, always perform a compatibility
jar test.
For 20 gallons per acre spray volume, use 3.3 cups
(800 ml) of water. For other spray volumes, adjust accord-
ingly. Only use water from the intended source at the
source temperature.
Add components in the sequence indicated in the Mixing
Order using 2 teaspoons for each pound or 1 teaspoon
for each pint of label rate per acre.
Always cap the jar and invert 10 cycles between compo-
nent additions.
When the components have all been added to the jar, let
the solution stand for 15 minutes. Evaluate the solution for
uniformity and stability. The spray solution should not have
free oil on the surface, nor fine particles that precipitate to
the bottom, nor thick (clabbered) texture. If the spray solu-
tion is not compatible, repeat the compatibility test with
the addition of a suitable compatibility agent. If the solution
is then compatible, use the compatibility agent as directed
on its label. If the solution is still incompatible, DO NOT
mix the ingredients in the same tank.

Mixing Order
1) Water. Begin by agitating a thoroughly clean sprayer
tank three-quarters full of clean water.
2) Agitation. Maintain constant agitation throughout mix-
ing and application.
3) Inductor. If an inductor is used, rinse it thoroughly after
each component has been added.
4) Products in PVA bags. Place any product contained in
water-soluble PVA bags into the mixing tank. Wait until
all water-soluble PVA bags have fully dissolved and the
product is evenly mixed in the spray tank before contin-
uing.
5) Water-dispersible products (dry flowables, wettable
powders, suspension concentrates, or suspo-
emulsions).
6) Water-soluble products, (such as
SAN 821 H 600 herbicide)
7) Emulsifiable concentrates (such as oil concentrate
when applicable).
8) Water-soluble additives (such as AMS or DAN when
applicable).
9) Remaining quantity of water.
Maintain constant agitation during application.
IV. Tank Mixing Information
Tank Mix Partners/Components
The herbicide products listed may be applied with
SAN 821 H 600 according to the specific tank mixing
instructions in this label and respective product labels.
See section VI. Crop-specific Information for more
details. Read and follow the applicable Restrictions and
Limitations and Directions For Use on all products
involved in tank mixing. The most restrictive labeling
applies to tank mixes.
SAN 821 H 600 may also be used in tank mixtures with
foliar applied insecticides including synthetic pyrethroids
such as Ambush*, Asana*, Pounce* and Warrior* insecti-
cides or with the carbamate insecticide Furadan*.
DO NOT apply SAN 821 H 600 in tank mixtures with
Lorsban* insecticide.
Physical incompatibility, reduced weed control, or crop
injury may result from mixing SAN 821 H 600 with other
pesticides (fungicides, herbicides, insecticides, or miti-
cides), additives, or fertilizers. BASF does not recommend
using tank mixes other than those listed on BASF labeling.
Local agricultural authorities may be a source of informa-
tion when using other than BASF-recommended tank
mixes.
• Accent* (nicosulfuron)
• Ally* (metsulfuron-methyl)
• Amber* (triasulfuron)
• Asulox* (asulam)
• Atrazine
• Axiom™ (flufenacet +
metribuzin)
• Basagran® (bentazon)
• Beacon* (primisulfuron-
methyl)
• Bleep II Magnum*
(s-metolachlor + atrazine)
• Bronate* (bromoxynil +
MCPA)
• Buctril® (bromoxynil)
• Bullet* (alachlor +
atrazine)
• Caparol* (prometryn)
• Crossbow* (2,4-D +
triclopyr)
• Curtail® (clopyralid +
2,4-D)
• Cyclone* (paraquat)
• Degree'" (acetochlor)
• Degree Xtra1" (acetochlor
+ atrazine)
• Dual Magnum™
(s-metolachlor)
• Dual II Magnum*
(s-metolachlor + atrazine)
• Eradicane* (EPTC)
• Evik* (ametryn)
• Exceed* (primisulfuron +
prosulfuron)
• Express* (thifensulfuron +
tribenuron-methyl)
• Fallow Master*
(glyphosate + dicamba)
• Field Master" (acetochlor
+ atrazine + glyphosate)
• Finesse* (chlorsulfuron +
metsulfuron-methyl)
• FulTime'" (acetochlor +
atrazine)
• Garlon* (triclopyr)
• Glean* (chlorsulfuron)
• Gramoxone* Extra
(paraquat)
• Guardsman* Max
(dimethenamid + atrazine)
• Harmony* Extra
(thifensulfuron +
tribenuron-methyl)
• Harness* (acetochlor)
• Harness* Xtra (acetochlor
+ atrazine)
• Hornet" (flumetsalam +
clopyralid)
• Karmex* (diuron)
• Kerb* (pronamide)
• Laddok* S-12 (bentazon +
atrazine)
• Landmaster® BW
(glyphosate + 2,4-D)
• Lariat* (alachlor +
atrazine)
• Lasso* (alachlor)
• Liberty* (glufosinate)
• Lightning* (imazethapyr +
imazapyr)
• MCPA
• Outlook*
(dimethenamid-P)
• Paramount* (quinclorac)
• Partner* (alachlor)
• Peak* (prosulfuron)
• Permit* (halosulfuron)
• Princep* (simazine)
• Prowl® (pendimethalin)
• Python'" (flumetsulam)
• Roundup Ultra*
(glyphosate)
• Roundup Ultra* RT
(glyphosate)
• Sencor* (metribuzin)
• Spirit" (primisulfuron +
prosulfuron)
• Stinger* (clopyralid)
• Surpass* (acetochlor)
• TopNotch™ (acetochlor)
• Tordon* 22K (picloram)
• Touchdown* (sulfosate)
• 2,4-D

V. Restrictions and Limitations
Maximum seasonal use rate: Refer to Table 4. Crop-specific Restrictions and Limitations for crop-specific
maximum seasonal use rates. Multiple applications may be needed per growing season. DO NOT exceed a total of
25.6 fluid ounces per acre per application. DO NOT exceed 51.2 fluid ounces of SAN 821 H 600 herbicide
(2 pounds acid equivalent) per acre per year.
Preharvest Interval (PHI): Refer to section VI. Crop-specific Information for preharvest intervals.
Restricted-entry Interval (REI): 24 hours
Crop Rotational Restrictions:
The interval between application and planting rotational crop is given below. Always exclude counting days when the
ground is frozen. Planting at intervals less than specified below may result in crop injury. Moisture is essential for the
degradation of this herbicide in soil. If dry weather prevails, use cultivation to allow herbicide contact with moist soil.
Planting/replanting restrictions for SAN 821 H 600 applications of 19.2 fluid ounces per acre or less (or
0.75 pounds ae/acre): No rotational cropping restrictions apply at 120 days or more following application.
Additionally, for annual crop uses in this label including corn, cotton, sorghum, and soybean, follow the preplant use
directions in section VI. Crop-specific Information. For barley, oat, wheat, and other grass seedings, the interval
between application and planting is 15 days per 6.4 fluid ounces per acre applied east of the Mississippi River and
22 days per 6.4 fluid ounces per acre west of the Mississippi River.
Planting/replanting restrictions for applications of more than 19.2 fluid ounces and up to 51.2 fluid
ounces of SAN 821 H 600 per acre: Corn, sorghum, cotton (east of the Rocky Mountains) and all other crops
grown in areas with 30" or more of annual rainfall may be planted 120 days or more after application. Barley, oat,
wheat, and other grass seedings, may be planted if the interval from application to planting is 30 days per 12.8 fluid
ounces per acre east of the Mississippi River and 45 days per 12.8 fluid ounces per acre west of the Mississippi
River. For all other crops in areas with less than 30" of annual rainfall, the interval between application and planting is
180 days or more.
Rainfast period: Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce the
effectiveness of SAN 821 H 600.
Stress: DO NOT apply to crops under stress due to lack of moisture, hail damage, flooding, herbicide injury, mechani-
cal injury, insects, or widely fluctuating temperatures as injury may result.
DO NOT apply through any type of irrigation equipment. DO NOT treat irrigation ditches or water used for crop irri-
gation or domestic purposes.

Table 4. Crop-specific Restrictions and Limitations1
Crop
Asparagus
Barley, Fall
, Spring
Conservation Reserve
Program (CRP)
Corn
Cotton
Fallow Ground
Grass grown for seed
Oats
Pastureland
Proso Millet
Small grains grown for
grass, forage, fodder, hay
and/or pasture
Sorghum
Soybean
Sugarcane
Triticale
Turf
Wheat
Maximum Rate per
Acre per Application
(fl ozs)
12.8
6.4
6.4
25.6
12.8
6.4
25.6
25.6
3.2
25.6
3.2
12.8
6.4
25.6
25.6
3.2
25.6
6.4
Maximum In-crop Rate
per Acre per Season
(fl ozs)
12.8
9.6
8.8
51.2
19.2
6.4
51.2
51.2
3.2
25.6
3.2
12.8
12.8
51.2
51.2
3.2
25.6
12.8
Livestock
Grazing or
Feeding
Yes
Yes
Yes
Yes2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Aircraft
Application
Allowed
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
'Refer to VI. Crop-specific Information section for more details.
!0nce the crop reaches the ensilage (milk) stage or later in maturity.
VI. Crop-specific Information
Asparagus
Apply SAN 821 H 600 herbicide to emerged and actively growing weeds in 40 - 60 gallons of diluted spray per treated
acre immediately after cutting the field, but at least 24 hours before the next cutting. Multiple applications may be made
per growing season.
If spray contacts emerged spears, crooking (twisting) of some spears may result. If such crooking occurs, discard affect-
ed spears.
Rates: Apply 6.4 - 12.8 fluid ounces of SAN 821 H 600 to control annual sowthistle, black mustard, Canada and
Russian thistle, and redroot pigweed, (carelessweed).
Apply 12.8 fluid ounces of SAN 821 H 600 to control common chickweed, field bindweed, nettleleaf goosefoot, and
wild radish. Multiple applications may be made per growing season. DO NOT exceed a total of 12.8 fluid ounces of
SAN 821 H 600 per treated acre, per crop year.
DO NOT harvest prior to 24 hours after treatment.
DO NOT use in the Coachella Valley of California.
10

Asparagus Tank Mixes Between-crop Tank Mixes
Apply 6.4 - 12.8 fluid ounces of SAN 821 H 600
herbicide with glyphosate (Roundup* Ultra herbicide) or
2,4-D to improve control of Canada thistle and field
bindweed.
Between-crop Applications
PREPLAN! DIRECTIONS (POSTHARVEST. FALLOW.
CROP STUBBLE. SET-ASIDE! FOR BROADLEAF
WEED CONTROL:
SAN 821 H 600 can be applied either postharvest in the
fall, spring, or summer during the fallow period or to crop
stubble/set-aside acres. Apply SAN 821 H 600 as a
broadcast or spot treatment to emerged and actively
growing weeds after crop harvest (postharvest) and before
a killing frost or in the fallow cropland or crop stubble the
following spring or summer.
See Crop Rotational Restrictions in section
V. Restrictions and Limitations for the required interval
between application and planting to prevent crop injury.
Rates and Timings:
Apply 3.2 - 25.6 fluid ounces of SAN 821 H 600 per acre.
Refer to Table 2 to determine use rates for specific target-
ed weed species. For best performance, apply
SAN 821 H 600 when annual weeds are less than 6" tall,
when biennial weeds are in the rosette stage and to
perennial weed regrowth in late summer or fall following a
mowing or tillage treatment. The most effective control of
upright perennial broadleaf weeds such as Canada thistle
and Jerusalem artichoke occurs if SAN 821 H 600 is
applied when the majority of weeds have at least 4 - 6" of
regrowth or for weeds such as field bindweed and hedge
bindweed that are in or beyond the full bloom stage.
Avoid disturbing treated areas following application.
Treatments may not kill weeds that develop from seed or
underground plant parts such as rhizomes or bulblets,
after the effective period for SAN 821 H 600. For seedling
control, a follow-up program or other cultural practices
could be instituted. For small grain in-crop uses of
SAN 821 H 600, refer to the small grain section for
details.
In tank mixes with one or more of the following herbicides,
apply 3.2 - 12.8 fluid ounces of SAN 821 H 600 per acre
for control of annual weeds, or 12.8 - 51.2* fluid ounces of
SAN 821 H 600 per acre for control of biennial and per-
ennial weeds:
Ally*
Amber*
Atrazine
Curtail*
Cyclone*
Fallow Master*
Finesse*
glyphosate
(Roundup Ultra)
'Note: Multiple applications may be reeded per growing season.
Gramoxone* Extra
Kerb*
Landmaster* BW
Paramount*
Sencor*
Tordon* 22K
Touchdown*
2,4-D
Corn (Field, Popcorn,
Seed, and Silage)
Direct contact of SAN 821 H 600 with corn seed must be
avoided. If corn seeds are less than 1.5" below the soil
surface, delay application until corn has emerged.
Applications of SAN 821 H 600 to corn during periods of
rapid growth may result in temporary leaning. Corn will
usually become erect within 3 - 7 days. Cultivation should
be delayed until after corn is growing normally to avoid
breakage.
Corn may be harvested or grazed for feed once the crop
has reached the ensilage (milk) stage or later in maturity.
Up to 2 applications of SAN 821 H 600 may be made
during a growing season. Sequential applications must be
separated by 2 weeks or more.
DO NOT apply SAN 821 H 600 to seed corn or popcorn
without first verifying with your local seed corn company
(supplier) the selectivity of SAN 821 H 600 on your inbred
line or variety of popcorn. This precaution will help avoid
potential injury of sensitive varieties.
Avoid using crop oil concentrates after crop emergence as
crop injury may result. Use crop oil concentrates only in
dry conditions when corn is less than 5" tall and when
applying SAN 821 H 600 alone or tank mixed with
atrazine.
Use of sprayable fluid fertilizer as the carrier is not recom-
mended for applications of SAN 821 H 600 made after
corn emergence.
SAN 821 H 600 is not registered for use on sweet corn.
PREPLANT AND PREEMERGENCE APPLICATION IN
NO TILLAGE CORN:
Rates: Apply 12.8 fluid ounces of SAN 821 H 600 per
acre on medium- or fine-textured soils containing 2.5% or
greater organic matter. Use 6.4 fluid ounces of
SAN 821 H 600 per acre on coarse soils (sand, loamy
11

(
sand, and sandy loam) or medium- and fine-textured soils
with less than 2.5% organic matter.
Timing: SAN 821 H 600 herbicide can be applied to
emerged weeds before, during, or after planting a corn
crop. When planting into a legume sod (e.g. alfalfa or
clover), apply SAN 821 H 600 after 4 - 6" of regrowth has
occurred.
PREEMERGENCE APPLICATION IN CONVENTIONAL
OR REDUCED TILLAGE CORN:
Rates: Apply 12.8 fluid ounces of SAN 821 H 600 per
treated acre to medium- or fine-textured soils that contain
2.5% organic matter or more. DO NOT apply to coarse-
textured soils (sand, loamy sand, or sandy loam) or any
soil with less than 2.5% organic matter until after corn
emergence (see Early Postemergence uses below).
Timing: SAN 821 H 600 may be applied after planting
and prior to corn emergence. Preemergence application of
SAN 821 H 600 does not require mechanical incorpora-
tion to become active. A shallow mechanical incorporation
is recommended if the application is not followed by ade-
quate rainfall or sprinkler irrigation. Avoid tillage equipment
(e.g. drags, harrows) that concentrate treated soil over
seed furrow, as seed damage could result.
Preemergence control of cocklebur, jimsonweed, and vel-
vetleaf may be reduced if conditions such as low tempera-
ture or lack of soil moisture cause delayed or deep germi-
nation of weeds.
EARLY POSTEMERGENCE APPLICATION IN ALL
TILLAGE SYSTEMS:
Rates: Apply 12.8 fluid ounces of SAN 821 H 600 per
treated acre. Reduce the rate to 6.4 fluid ounces of
SAN 821 H 600 per treated acre for corn grown on
coarse-textured soils (sand, loamy sand, and sandy loam).
Timing: Apply between corn emergence and the 5-leaf
stage or 8" tall, whichever occurs first. Refer to Late
Postemergence Application if the sixth true leaf is
emerging from whorl or the corn is greater than 8" tall.
LATE POSTEMERGENCE APPLICATION:
Rate: Apply 6.4 fluid ounces of SAN 821 H 600 per treat-
ed acre.
Timing: Apply SAN 821 H 600 from 8 - 36" tall corn or
15 days before tassel emergence, whichever comes first.
For best performance, apply when weeds are less than
3" tall.
Apply directed spray when corn leaves prevent proper
spray coverage, sensitive crops are growing nearby, or
tank mixing with 2,4-D. DO NOT apply SAN 821 H 600
when soybeans are growing nearby if any of these condi-
tions exist:
• corn is more than 24" tall
• soybean are more than 10" tall
• soybean have begun to bloom
Corn Tank Mixes or Sequential Uses
When using tank mix or sequential applications with
SAN 821 H 600, always follow the companion product
label to determine specific use rates by soil types, weed
species, and weed or crop growth stage. In addition, fol-
low precautions and restrictions including state and local
use restrictions that may apply to specific products.
.5k
Apply SAN 821 H 600 prior
one or more of the following
Accent*1
Atrazine
Axiom"
Banvel*1
Beacon*'
Bleep"
Bullet*
SAN 821 H 600* '
Degree™
Degree Xtra1"
Dual Magnum™
Dual II Magnum*
Eradicane*
Exceed*'
Field Master*
FulTime*
Gramoxone* Extra
Guardsman* Max
Harness*
to, in tank mix with, or after
herbicides:
Harness* Xtra
Hornet™'
Laddok*S-12
Lasso*
Liberty*3
Lightning*5
Outlook*
Permit*'
Princep*
Prowl*
Python™
Roundup Ultra*'
Roundup Ultra* RT
Spirit™ '
Stinger*'
Surpass*
TopNotch™
Touchdown*
2,4-D1
' See Table 5. Specific Guidelines for Tank Mixes or Sequential
Use Programs for additional limitations or restrictions that apply for
tank mix or sequential use programs with these products.
2 Use only on Liberty Link* (glufosinate tolerant) corn hybrids.
3 Includes postemergence use on Roundup Ready* (glyphosate tolerant)
corn hybrids.
' Use only Clearfield" (imidazolinone tolerant) corn hybrids.
12

Table 5. Specific Guidelines for Tank Mixes or
Sequential Use Programs
Tank Mix Partner
Accent* or
Beacon®
2,4-D
Banvel*,
SAN 821 H 600
or Marksman*
herbicide
Exceed*, Spirit™,
Stinger*, Hornet™,
or Permit*
Rate Per Acre
When tank mixing, applications immedi-
ately following extreme day or night tem-
perature fluctuations or applications
when daytime temperatures DO NOT
exceed 50° F may result in decreased
weed control or crop injury. Delay appli-
cation until the temperatures warm and
both weeds and crop resume normal
growth.
To provide maximum crop safety after
corn emergence, use this tank mix only
after corn is greater than 8" tall and
when application can be made with drop
pipes that direct spray beneath corn
leaves and away from the whorl of the
corn. The maximum rate of 2,4-D in this
tank mix is 0.25 pints per acre (0.125
pounds of acid equivalent per acre).
Tank mixes with these products that
contain dicamba must not exceed a total
combined rate of 0.50 pounds of dicam-
ba acid equivalent per acre (0.25 pound
on coarse-textured soils or on any soil
when corn is greater than 8" tall).
Sequential applications of these prod-
ucts must be separated by a minimum
of 2 weeks (unless the combined rate is
less than 0.5 pounds of dicamba acid
equivalent and corn is 8" tall or less) and
must not exceed a combined total of
0.75 pounds dicamba acid equivalent
per acre for in-crop use.
For improved control of velvetleaf, tank
mix 0.25 - 0.5 ounce of Exceed, 0.5
ounce of Spirit, or 0.17 - 0.33 ounce
Permit per acre with SAN 821 H 600.
For improved control of Canada thistle,
Stinger at 1.5 - 3 fluid ounces per acre
or Hornet at 0.6 - 1.2 ounces per acre
may be tank mixed with
SAN 821 H 600. Use the higher rate in
the range for heavier infestations of
these weeds.
Cotton
PREPLANT APPLICATION:
Apply up to 6.4 fluid ounces of SAN 821 H 600 per acre
to control emerged broadleaf weeds prior to planting cot-
ton in conventional or conservation tillage systems.
For best performance, apply SAN 821 H 600 when weeds
are in the 2 - 4 leaf stage and rosettes are less than
2" across.
Following application of SAN 821 H 600 and a minimum
accumulation of 1" of rainfall or overhead irrigation, a
waiting interval of 21 days is required per 6.4 fluid ounces
per acre or less. These intervals must be observed prior to
planting cotton.
DO NOT apply preplant to cotton west of the Rockies.
DO NOT make SAN 821 H 600 preplant applications to
cotton in geographic areas with average annual rainfall
less than 25".
If applying a spring preplant treatment following application
of a fall preplant (postharvest) treatment, then the combi-
nation of both treatments must not exceed 2 pounds acid
equivalent per acre.
Cotton Tank Mixes
For control of grasses or additional broadleaf weeds,
SAN 821 H 600 may be tank mixed with Bladex*,
Caparol*, Gramoxone" Extra, and Roundup* Ultra RT her-
bicides.
Grass Grown for Seed
Apply 6.4 - 12.8 fluid ounces of SAN 821 H 600 per treat-
ed acre on seedling grass after the crop reaches the
3 - 5-leaf stage. Apply up to 51.2 fluid ounces of
SAN 821 H 600 on well-established perennial grass. For
best performance, apply SAN 821 H 600 when weeds are
in the 2 - 4 leaf stage and rosettes are less than 2" across.
Use the higher level of listed rate ranges when treating
more mature weeds or dense vegetative growth.
To suppress annual grasses such as brome (downy and
ripgut), rattail fescue, and windgrass, apply up to 51.2 fluid
ounces of SAN 821 H 600 per treated acre in the fall or
late summer after harvest and burning of established grass
seed crops. Applications should be made immediately fol-
lowing the first irrigation when the soil is moist and before
weeds have more than 2 leaves.
DO NOT apply SAN 821 H 600 after the grass seed crop
begins to joint.
Refer to the Pasture, Hay, Rangeland, and Farmstead
section for grazing and feeding restrictions.
Grass Seed Tank Mixes
SAN 821 H 600 may be applied in tank mixes with one or
more of the following herbicides:
• Buctril*
• Curtail*
• Express*
• Karmex®
• MCPA amine
• Sencor®
• Stinger"
• 2,4-D amine or ester
13

Proso Millet
For use only within Colorado, Nebraska, North
Dakota, South Dakota, and Wyoming.
SAN 821 H 600 herbicide combined with 2,4-D will pro-
vide control or suppression of the annual broadleaf weeds
listed in Table 1.
Apply 3.2 fluid ounces of SAN 821 H 600 with
0.375 pounds a.i. of 2,4-D. Apply the tank mix of
SAN 821 H 600 + 2,4-D as a broadcast or spot treatment
to emerged and actively growing weeds and when proso
millet is in the 2 - 5 leaf stage. Use directions for 2,4-D
products vary with manufacturers. Refer to a 2,4-D prod-
uct with labeling consistent with the crop stage timing for
SAN 821 H 600. Some types of proso millet may be
affected adversely by a tank mix of SAN 821 H 600 +
2,4-D.
DO NOT apply unless possible proso millet crop injury will
be acceptable.
Restrictions for proso millet that is grazed or cut for hay
are indicated in Table 6. Timing Restrictions for
Lactating Dairy Animals Following Treatment in
Pasture, Hay, Rangeland, and Farmstead section of
this label.
Pasture, Hay, Rangeland, and
Farmstead (noncropland)
SAN 821 H 600 may be used on pasture, hay, rangeland,
and farmstead (non-cropland) (including fencerows and
non-irrigation ditchbanks) for control or suppression of
broadleaf weed and brush species listed in Table 1.
SAN 821 H 600 may also be applied to non-cropland
areas to control broadleaf weeds in noxious weed control
programs, districts, or areas including broadcast or spot
treatment of roadsides and highways, utilities, railroad, and
pipeline rights-of-way. Noxious weeds must be recognized
at the state level, but programs may be administered at
state, county, or other level.
SAN 821 H 600 uses described in this section also per-
tain to grasses and small grains (forage, sorghum, rye,
sudangrass, or wheat) grown for grass, forage, fodder, hay
and/or pasture only. Grasses and small grains not grown
for grass, forage, fodder, hay and/or pasture must comply
with crop-specific uses in this label. Some perennial
weeds may be controlled with lower rates of either
SAN 821 H 600 or SAN 821 H 600 plus 2,4-D (refer to
Table 2).
Rates and Timings
Refer to Table 2 for rate selection based on targeted
weed or brush species. Some weed species will require
tank mixes for adequate control.
Rates must not exceed 25.6 fluid ounces of
SAN 821 H 600 per acre for spot treatments.
Retreatments may be made as needed; however,
DO NOT exceed a total of 32 fluid ounces of
SAN 821 H 600 per treated acre during a growing sea-
son.
Crop-specific Restrictions and Limitations
DO NOT apply more than 12.8 fluid ounces of
SAN 821 H 600 per acre to small grains grown for pas-
ture.
Newly seeded areas may be severely injured if more than
12.8 fluid ounces of SAN 821 H 600 is applied per acre.
Established grass crops growing under stress can exhibit
various injury symptoms that may be more pronounced if
herbicides are applied. Bentgrass, carpetgrass, buffalo-
grass, and St. Augustinegrass may be injured if more than
12.8 fluid ounces of SAN 821 H 600 is applied per acre.
Usually colonial bentgrasses are more tolerant than creep-
ing types. Velvetgrasses are most easily injured.
Treatments will kill or injure alfalfa, clovers, lespedeza, wild
winter peas, vetch, and other legumes.
Table 6 lists the timing restrictions for grazing or harvest-
ing hay from treated fields. There are no grazing restric-
tions for animals other than lactating dairy animals.
Table 6. Timing Restrictions for Lactating Dairy
Animals Following Treatment
SAN 821 H 600
Rate per
Treated Acre
(ozs)'
Up to 6.4
Up to 12.8
Up to 25.6
Days Before
Grazing
(days)
7
21
40
Days Before
Hay Harvest
(days)
37
51
70
' Single maximum rate of 25.6 ozs permitted and total maximum rate of
51.2 ozs per year.
* Note: Observe all precautions and restrictions on labels if products used
in tank mixtures.
SAN 821 H 600 can be applied using water, oil in water
emulsions including invert systems, or sprayable fluid fertil-
izer as a carrier (refer to the Compatibility Test for Mix
Components).
To prepare oil in water emulsions, half-fill spray tank with
water, then add the appropriate amount of emulsifier. With
continuous agitation, slowly add the herbicide and then
the oil (such as diesel oil or fuel oil) or a premix of oil plus
additional emulsifier to spray tank. Complete filling of spray
tank with water. Maintain vigorous agitation during spray
operation to prevent oil and water from forming separate
layers. SAN 821 H 600 may be applied broadcast using
either ground or aerial application equipment.
Aerial Application:
• Spray Volume: Use 2 - 40 gallons of diluted spray per
treated acre in a water-based carrier.
Ground Application:
• Spray Volume: Use 3 - 600 gallons of diluted spray
per treated acre. The volume of spray applied will
14

(
depend on the height, density, and type of weeds or
brush being treated and on the type of equipment
being used.
• Spot Treatments: SAN 821 H 600 herbicide may be
applied to individual clumps or small areas of undesir-
able vegetation using handgun or similar types of appli-
cation equipment. Apply diluted sprays to allow com-
plete wetting (up to runoff) of foliage and stems.
Cut Surface Treatments:
SAN 821 H 600 may be applied as a cut surface treat-
ment for control of unwanted trees and prevention of
sprouts of cut trees.
Rate: Mix 1 part SAN 821 H 600 with 1 - 3 parts water to
create the application solution. Use the lower dilution rate
when treating difficult-to-control species.
• For Frill or Girdle Treatments: Make a continuous cut
or a series of overlapping cuts using an axe to girdle tree
trunk. Spray or paint the cut surface with the solution.
• For Stump Treatments: Spray or paint freshly cut sur-
face with the water mix. The area adjacent to the bark
should be thoroughly wet.
Note: For more rapid foliar effects, 2,4-D may be added
to the solution.
Applications For Control of Dormant Multiflora Rose:
SAN 821 H 600 can be applied when plants are dormant
as an undiluted spot treatment directly to the soil or as a
basal oil bark treatment using an oil-water emulsion solu-
tion.
• Spot treatments: Spot treatment applications of
SAN 821 H 600 should be applied directly to the soil as
close as possible to the root crown but within 6 - 8" of
the crown. On sloping terrain, apply SAN 821 H 600 to
the uphill side of the crown. DO NOT apply when snow
or water prevents applying SAN 821 H 600 directly to
the soil. The use rate of SAN 821 H 600 depends on
the canopy diameter of the multiflora rose.
Examples: Use 0.20, 0.75, or 1.85 fluid ounces of
SAN 821 H 600 respectively, for 5, 10, or 15 feet
canopy diameters.
• Basal oil bark treatments: For basal oil bark treat-
ments, apply SAN 821 H 600 to the basal stem region
from the ground line to a height of 12 - 18". Spray until
runoff, with special emphasis on covering the root
crown. For best results, apply SAN 821 H 600 when
plants are dormant. DO NOT apply after bud break or
when plants are showing signs of active growth.
DO NOT apply when snow or water prevents applying
SAN 821 H 600 to the ground line.
To prepare approximately 2 gallons of a oil spray solution:
1) Combine 1.5 gallons of water, 1 ounce of emulsifier,
16 fluid ounces of SAN 821 H 600, and 2.5 pints of
No. 2 dieselfuel.
2) Adjust the amounts of materials used proportionately to
the amount of final spray solution desired.
DO NOT exceed 4 gallons of spray solution mix applied
per acre per year.
Pasture Tank Mixes
SAN 821 H 600 may be applied in tank mixes with one or
more of the following herbicides:
• Ally*
• Amber*
• Crossbow8
• Curtail*
• Garlon*
• Gramoxone* Extra
• Roundup Ultra* RT
• Stinger*
• Tordon* 22K
• 2,4-D
Conservation Reserve Program (CRP)
SAN 821 H 600 may be used on both newly seeded and
established grasses grown in Conservation Reserve or
federal Set-Aside Programs. Treatments of
SAN 821 H 600 will injure or may kill alfalfa, clovers,
lespedeza, wild winter peas, vetch, and other legumes.
NEWLY SEEDED AREAS
SAN 821 H 600 may be applied either preplant or post-
emergence to newly seeded grasses or small grains such
as barley, oats, rye, sudangrass, wheat, or other grain
species grown as a cover crop. Postemergence applica-
tions may be made after seedling grasses exceed the
3-leaf stage. Rates of SAN 821 H 600 greater than
12.8 fluid ounces per treated acre may severely injure
newly seeded grasses.
Preplant applications may injure new seedings if the inter-
val between application and grass planting is less than
45 days per 12.8 fluid ounces of SAN 821 H 600 applied
per treated acre west of the Mississippi River or 20 days
per 12.8 fluid ounces applied east of the Mississippi River.
ESTABLISHED GRASS STANDS
Established grass stands are perennial grasses planted
one or more seasons prior to treatment. Certain species
(bentgrass, carpetgrass, smooth brome, buffalograss, or
St. Augustinegrass) may be injured when treated with
more than 12.8 fluid ounces of SAN 821 H 600 per treat-
ed acre.
When applied at specified rates, SAN 821 H 600 will con-
trol many annual and biennial weeds and provide control
or suppression of many perennial weeds.
Rates and Timings
Apply 3.2 - 51.2 fluid ounces of SAN 821 H 600 per acre.
Refer to Table 2 for rates based on target weed species.
SAN 821 H 600 may be tank mixed or applied sequential-
ly with other products labeled for use in Conservation
Reserve Programs such as atrazine, Cyclone*, glyphosate
(Roundup Ultra*), Gramoxone* Extra, Touchdown*, or
2,4-D.
Retreatments may be made as needed; however,
DO NOT exceed a total of 51.2 fluid ounces (4 pints) of
SAN 821 H 600 per acre per year.
15

n
Small Grains not underseeded to legumes
(fall- and spring-seeded barley,
oat, triticale and wheat)
SAN 821 H 600 herbicide combinations with listed tank
mix partners will provide control or suppression of the
annual broadleaf weeds listed in Table 1. For improved
control of listed weeds, tank mix SAN 821 H 600 with one
or more of the herbicides listed. SAN 821 H 600 used in a
tank mix with other herbicides offers the best spectrum of
weed control and herbicide tolerant or resistant weed
management. Refer to the specific crop section for
SAN 821 H 600 application rate and timing.
For applications prior to weed emergence or when
sulfonylurea-resistant weeds are present or suspected,
tank mix a minimum of 2.4 fluid ounces of
SAN 821 H 600 per treated acre with a non-sulfonylurea
herbicide such as 2,4-D or MCPA. Tank mixing
SAN 821 H 600 with these products will offer more con-
sistent control of sulfonylurea-resistant weeds.
Additives: When tank mixing SAN 821 H 600 with sul-
fonylurea herbicides (Ally8, Amber", Express8, Finesse*,
Glean*, Harmony* Extra, and Peak*}, use 1 - 4 pints of an
agriculturally approved surfactant (containing at least 80%
active ingredient) per 100 gallons of spray or not more
than 0.25 - 0.5% by volume. Use the highest rate of sur-
factant when using the lower rate ranges of the tank mix
or when treating more mature and difficult to control
weeds or dense vegetative growth.
Refer to the specific crop sections below for use rates.
When treating difficult to control weeds such as kochia,
wild buckwheat, cow cockle, prostrate knotweed, Russian
thistle, and prickly lettuce or when dense vegetative
growth occurs, use the 2.4 - 3.2 fluid ounces of
SAN 821 H 600 per acre.
Timings: Apply SAN 821 H 600 before, during, or after
planting small grains. See specific small grain crop uses
below for maximum crop stage. For best performance,
apply SAN 821 H 600 when weeds are in the 2 - 3 leaf
stage and rosettes are less than 2" across. Applying
SAN 821 H 600 to small grains during periods of rapid
growth may result in crop leaning. This condition is tempo-
rary and will not reduce crop yields.
Applications to small grains may be made with aerial appli-
cations with 1 gallon of water or more per acre. Where
dense foliage is present, 2 - 3 gallons of water per acre
should be used.
Restrictions for small grain areas that are grazed or cut for
hay are indicated in Table 6 in Pasture, Hay, Rangeland,
and Farmstead section of this label.
Small Grains: Barley
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 1.6 - 3.2 fluid ounces of SAN 821 H 600 to fall-
seeded barley prior to the jointing stage. Apply 1.6 - 2.4
fluid ounces of SAN 821 H 600 before spring-seeded bar-
ley exceeds the 4-leaf stage.
Note: For spring barley varieties that are seeded during
the winter months or later, follow the rates and timings
given for spring-seeded barley.
DO NOT tank mix SAN 821 H 600 with 2,4-D in early
season applications on spring-seeded barley.
PREHARVEST APPLICATIONS:
SAN 821 H 600 can be used to control weeds that may
interfere with harvest of fall- and spring-seeded barley.
Apply 6.4 fluid ounces of SAN 821 H 600 per acre as a
broadcast or spot treatment to annual broadleaf weeds
when barley is in the hard dough stage and the green
color is gone from the nodes (joints) of the stem. Best
results will be obtained if application can be made when
weeds are actively growing, but before weeds canopy.
A waiting interval of 7 days is required before harvest.
DO NOT use preharvest-treated barley for seed unless a
germination test is performed on the seed with an accept-
able result of 95% germination or better.
For control of additional broadleaf weeds or grasses,
SAN 821 H 600 may be tank mixed with other herbicides,
such as 2,4-D, that are labeled for preharvest uses in bar-
ley.
DO NOT make preharvest applications in California.
16

(
Barley Tank Mixes
Table 7.
Tank Mix Partner
Ally*
Amber*
Bronate*
Buctrir
Express*
Finesse*
Glean*
Harmony* Extra
MCPA amine or ester
Metribuzin (Sencor*)
2,4-D amine or ester"
Rate Per Acre
0.05 - 0.1 ounce1
0.14 - 0.28 ounce1
0.75 - 1.5 pints
1 - 1 .5 pints
0.083 -0.1 67 ounce1
0.167 - 0.33 ounce1
0.167 ounce'
0.167 - 0.33 ounce'
8-12 fluid ounces2
(0.25 - 0.375 pound a.e.)
0.125 - 0.47 pound a.i.
8 fluid ounces
(0.25 pound a.e.)
' DO NOT use low rates of sulfonylureas (Ally, Amber, Express,
Finesse, Glean, and Harmony Extra) on more mature weeds or on
dense vegetative growth.
1 When using formulations other than 4 pounds per gallon use pounds
of a.e. per acre listed.
3 This tank mix is for fall-seeded barley only
Small Grains: Oat
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 1.6 - 3.2 fluid ounces of SAN 821 H 600 herbicide
per acre to fall-seeded oat prior to the jointing stage.
Apply 1.6 - 3.2 fluid ounces of SAN 821 H 600 before
spring-seeded oat exceeds the 5-leaf stage. A minimum
7-day PHI is required for oats.
SAN 821 H 600 may be tank mixed with MCPA amine or
ester for applications in oat.
DO NOT tank mix SAN 821 H 600 with 2,4-D in oat.
Small Grains: Triticale
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 1.6 - 3.2 fluid ounces of SAN 821 H 600 to triticale.
Early season applications to fall-seeded triticale must be
made prior to the jointing stage.
Early season applications to spring-seeded triticale must
be made before triticale reaches the 6-leaf stage.
Triticale Tank Mixes: For best performance,
SAN 821 H 600 should be used in tank mix combination
with bromoxynil (Buctril, Moxy™ 2E) herbicide.
Small Grains: Wheat
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 1.6 - 3.2 fluid ounces of SAN 821 H 600 to wheat
unless using one of the fall-seeded wheat specific pro-
grams below. Early season applications to fall-seeded
wheat must be made prior to the jointing stage.
Early season applications to spring-seeded wheat must be
made before wheat exceeds the 6-leaf stage.
Early developing wheat varieties such as TAM 107,
Madison, or Wakefield must receive application between
early tillering and the jointing stage. Care should be taken
in staging these varieties to be certain that the application
occurs prior to the jointing stage.
To improve control of Russian thistle, flixweed, gromwell,
or mayweed, add 2,4-D amine or ester to a tank mix with
one of the following herbicides: Ally*, Amber*, Express",
Finesse8, Glean*, Harmony8 Extra, or Peak*.
SPECIFIC USE PROGRAMS FOR FALL-SEEDED
WHEAT ONLY:
SAN 821 H 600 may be used at 4.75 fluid ounces on fall-
seeded wheat in Western Oregon as a spring application
only. In Colorado, Kansas, New Mexico, Oklahoma, and
Texas, up to 6.4 fluid ounces of SAN 821 H 600 may be
applied on fall-seeded wheat after it exceeds the 3-leaf
stage for suppression of perennial weeds, such as field
bindweed. Applications may be made in the fall following a
frost but before a killing freeze. SAN 821 H 600 may be
tank mixed with 2,4-D amine at 6.4 fluid ounces after
wheat begins to tiller. Periods of extended stress such as
cold and wet weather may enhance the possibility of crop
injury. For fall applications only, DO NOT use if the poten-
tial for crop injury is not acceptable.
PREHARVEST APPLICATIONS:
SAN 821 H 600 can be used to control weeds that may
interfere with harvest of wheat. Apply 6.4 fluid ounces
SAN 821 H 600 per acre as a broadcast or spot treat-
ment to annual broadleaf weeds when wheat is in the hard
dough stage and the green color is gone from the nodes
(joints) of the stem. Best results will be obtained if applica-
tion can be made when weeds are actively growing but
before weeds canopy.
A waiting interval of 7 days is required before harvest.
DO NOT use preharvest-treated wheat for seed unless a
germination test is performed on the seed with an accept-
able result of 95% germination or better.
For control of additional broadleaf weeds or grasses,
SAN 821 H 600 may be tank mixed with other herbicides
such as Ally, Roundup" Ultra, and 2,4-D.
DO NOT make preharvest applications in California.
17

Wheat Tank Mixes
Table 8.
Tank Mix Partner
Ally*
Amber"
Bronate*
Buctril*
Curtail8
Express"
Finesse®
Glean*
Harmony* Extra
Karmex"3
Glyphosate
(Roundup Ultra® RT)4
MCPA amine or ester6
Metribuzin3
(Sencor*)
Peak*'
Stinger"
2,4-D amine or ester6
Rate Per Acre
0.05 - 0.1 ounce1
0.14 - 0.28 ounce1
0.75 - 1.5 pints
1 - 1 .5 pints
2 - 2.67 pints
0.083 -0.1 67 ounce1
0.167 - 0.33 ounce1
0.167 ounce1
0.167 - 0.33 ounce1
0.5 - 1 .5 pounds
12-16 fluid ounces
8-12 fluid ounces
(0.25 - 0.375 pound a.e.)
0.25 - 0.375 pound a.i.
0.25 - 0.38 ounce
4 - 5.33 fluid ounces
8-12 fluid ounces
(0.25 - 0.375 pound a.e.)
1 DO NOT use low rates of sulfonylurea herbicides, such as Ally,
Amber, Express, Finesse, Glean, Harmony Extra, and Peak on more
mature weeds or on dense vegetative growth.
! Tank mixes with Karmex and metribuzin are tor use in fall-seeded
wheat only.
3 A tank mix of up to 3.2 fluid ounces of SAN 821 H 600 herbicide
with Roundup Ultra RT or any glyphosate formulation labeled for use
as a preplan! application to small grains may be applied with no wait-
ing period prior to planting.
4 Up to 32 fluid ounces of (1 .0 pound a.e.) may be used on fall-seeded
wheat if crop injury is acceptable. When using formulations other than
4 pounds per gallon, use the pounds of a.e. per acre listed.
Sorghum
SAN 821 H 600 may be applied preplant, postemergence,
or preharvest in sorghum to control many annual broadleaf
weeds and to reduce competition from established per-
ennial broadleaf weeds, as well as control their seedlings.
DO NOT graze or feed treated sorghum forage or silage
prior to mature grain stage. If sorghum is grown for pas-
ture or hay, refer to Pasture, Hay, Rangeland, and
Farmstead section of this label for specific grazing and
feeding restrictions.
DO NOT apply SAN 821 H 600 to sorghum grown for
seed production.
PREPLANT APPLICATION:
Up to 6.4 fluid ounces of SAN 821 H 600 may be applied
per acre if applied at least 15 days before sorghum plan-
ting.
POSTEMERGENCE APPLICATION:
Up to 6.4 fluid ounces of SAN 821 H 600 per acre may
be applied after sorghum is in the spike stage (all sorghum
emerged) but before sorghum is 15" tall. For best perfor-
mance, apply SAN 821 H 600 when the sorghum crop is
in the 3 - 5 leaf stage and weeds are small (less than
3" tall). Use drop pipes (drop nozzles) if sorghum is taller
than 8". Keep the spray off the sorghum leaves and out of
the whorl to reduce the likelihood of crop injury and to
improve spray coverage of weed foliage. Applying
SAN 821 H 600 to sorghum during periods of rapid
growth may result in temporary leaning of plants or rolling
of leaves. These effects are usually outgrown within
10 - 14 days.
Preharvest uses in Texas and Oklahoma only: Up to
6.4 fluid ounces of SAN 821 H 600 per acre may be
applied for weed suppression any time after the sorghum
has reached the soft dough stage. An agriculturally
approved surfactant may be used to improve perfor-
mance. For aerial applications, use at least 2 gallons of
water-based carrier per treated acre. Delay harvest until
30 days after a preharvest treatment.
SPLIT APPLICATION:
SAN 821 H 600 may be applied in split applications:
preplant followed by postemergence or preharvest; or
postemergence followed by preharvest. DO NOT exceed
6.4 fluid ounces per acre per application or a total of
12.8 fluid ounces per acre per season.
Sorghum Tank Mixes and
Sequential Treatments
SAN 821 H 600 may be applied prior to, in a tank mix
with, or after one or more of the following herbicides:
atrazine
Basagran"
Bleep II Magnum"
Buctril*
Cyclone*
Dual Magnum™
Dual II Magnum*
Fallow Master*
Gramoxone* Extra
Guardsman" Max
Laddok' S-12
Landmaster*
Lasso*
Outlook"
Paramount*
Peak*
Permit*
Roundup Ultra*
Soybean
PREPLANT APPLICATIONS:
Apply 3.2 - 12.8 fluid ounces of SAN 821 H 600 per acre
to control emerged broadleaf weeds prior to planting soy-
beans.
DO NOT exceed 12.8 fluid ounces of SAN 821 H 600 per
acre in a spring application prior to planting soybeans.
18

Following application of SAN 821 H 600 herbicide and a
minimum accumulation of 1" rainfall or overhead irrigation,
a waiting interval of 14 days is required for 6.4 fluid ounces
per acre or less, and 28 days for 12.8 fluid ounces per
acre. These intervals must be observed prior to planting
soybeans or crop injury may occur.
DO NOT make SAN 821 H 600 preplant applications to
soybeans in geographic areas with average annual rainfall
less than 25".
PREHARVEST APPLICATIONS:
SAN 821 H 600 can be used to control many annual and
perennial broadleaf weeds and control or suppress many
biennial and perennial broadleaf weeds in soybean prior to
harvest (refer to Table 1). Apply 6.4 - 51.2 fluid ounces of
SAN 821 H 600 per acre as a broadcast or spot treat-
ment to emerged and actively growing weeds after soy-
bean pods have reached mature brown color and at least
75% leaf drop has occurred.
Soybeans may be harvested 7 days or more after a
preharvest application.
Treatments may not kill weeds that develop from seed or
underground plant parts, such as rhizomes or bulblets,
after the effective period for SAN 821 H 600. For seedling
control, a follow-up program or other cultural practice
could be instituted.
DO NOT use preharvest-treated soybean for seed unless
a germination test is performed on the seed with an
acceptable result of 95% germination or better.
DO NOT feed soybean fodder or hay following a prehar-
vest application of SAN 821 H 600.
DO NOT make preharvest applications in California.
Soybean Tank Mixes
PREPLANT TANK MIXES:
SAN 821 H 600 may be tank mixed with other herbicides
registered for early preplant use in soybeans including
burndown herbicides such as glyphosate (Roundup Ultra*)
and 2,4-D or residual herbicides such as Outlook* or
Dual Magnum™.
PREHARVEST TANK MIXES:
SAN 821 H 600 may be tank mixed with other herbicides
registered for preharvest use in soybeans such as
glyphosate (Roundup Ultra) and Gramoxone* Extra.
Sugarcane
Apply SAN 821 H 600 for control of annual, biennial, or
perennial broadleaf weeds listed in Table 1. Apply 6.4 -
19.2 fluid ounces of SAN 821 H 600 per acre for control
of annual weeds, 12.8 - 25.6 fluid ounces for control of
biennial weeds and 25.6 fluid ounces for control or sup-
pression of perennial weeds.
Use the higher level of listed rate ranges when treating
dense vegetative growth.
Retreatments may be made as needed, however,
DO NOT exceed a total of 51.2 fluid ounces of
SAN 821 H 600 per treated acre during a growing sea-
son. A minimum 87-day PHI is required for sugarcane.
Timing: SAN 821 H 600 may be applied to sugarcane
any time after weeds have emerged, but before the close-
in stage of sugarcane. Applications of 25.6 fluid ounces of
SAN 821 H 600 per acre made over the top of actively
growing sugarcane may result in crop injury.
When possible, direct the spray beneath the sugarcane
canopy to minimize the likelihood of crop injury. Using
directed sprays will also help maximize the spray coverage
of weed foliage.
Sugarcane Tank Mixes
SAN 821 H 600 may be tank mixed with other products
registered for use in sugarcane such as Asulox*, atrazine,
Evik*, and 2,4-D.
Farmstead Turf (noncropland)
and Sod Farms
For use in farmstead (noncropland) and sod farms, apply
2.4 - 25.6 fluid ounces of SAN 821 H 600 per acre to
control or suppress growth of many annual, biennial, and
some perennial broadleaf weeds commonly found in turf.
SAN 821 H 600 will also suppress many other listed
perennial broadleaf weeds and woody brush and vine
species. Refer to Table 2 for application rates based on
targeted weed or brush species and growth stage. Some
weed species will require tank mixes for adequate control.
Repeat treatments may be made as needed; however,
DO NOT exceed 25.6 fluid ounces of SAN 821 H 600 per
acre per growing season.
Apply 30 - 200 gallons of diluted spray per treated acre
(3-17 quarts of water per 1,000 square feet), depending
on density or height of weeds treated and on the type of
equipment used.
To avoid injury to newly seeded grasses, delay application
of SAN 821 H 600 until after the second mowing.
Furthermore, applying more than 12.8 fluid ounces of
SAN 821 H 600 per treated acre may cause noticeable
stunting or discoloration of sensitive grass species such as
bentgrass, carpetgrass, buffalograss, and
St..Augustinegrass.
In areas where roots of sensitive plants extend, DO NOT
apply more than 3.2 fluid ounces of SAN 821 H 600 per
treated acre on coarse-textured (sandy-type) soils, or in
excess of 6.4 fluid ounces per treated acre on fine-
textured soils. DO NOT make repeat applications in these
areas for 30 days and until previous applications of
SAN 821 H 600 have been activated in the soil by rain or
irrigation.
19

I
Farmstead Turf (noncropland) and
Sod Farm Tank Mixes
Apply 2.5 - 6.4 fluid ounces of SAN 821 H 600 herbicide
per acre in a tank mix with one of the products in Table 9
at the rates listed. Use the higher rates when treating
established weeds.
Table 9.
Tank Mix Partner
bromoxynil (Buctril*)
MCPA
MCPP
2,4-D
Rate Per Acre
0.375 - 0.5 pound a. I.
0.5 - 1.5 pounds a.e.
0.5 - 1.5 pounds a.e.
0.5 - 1.5 pounds a.e.
Pests listed in this label
Common Name
ANNUALS
Alkanet
Amaranth, Palmer
, Powell
, Spiny
Aster, Slender
Bedstraw, Catchweed
Beggarweed, Florida
Broomweed, Common
Buckwheat, Tartary
, Wild
Buffalobur
Burclover, California
Burcucumber
Buttercup, Corn
, Creeping
, Roughseed
, Western Field
Carpetweed
Catchfly, IMightflowering
Champmile, Corn
Chervil, Bur
Chickweed, Common
Clovers
Cockle, Corn
, Cow
, White
Cocklebur, Common
Copperleaf, Hophornbeam
Cornflower (Bachelor Button)
Croton, Tropic
, Woolly
Daisy, English
Dragonhead, American
Eveningprimrose, Cutleaf
Falseflax, Smallseed
Fleabane, Annual
Flixweed
Fumitory
Goosefoot, Nettleleaf
Hempnettle
Henbit
Jacob's Ladder
Jimsonweed
Knawel (German Moss)
Knotweed, Prostrate
Kochia
Ladysthumb
Lambsquarters, Common
Lettuce, Miners
, Prickly
Mallow, Common
, Venice
Marestail (Horseweed)
Mayweed
Morningglory, Ivyleaf
,Tall
Mustard, Black
, Blue
, Tansy
, Treacle
, Tumble
, Wild
Nightshade, Black
, Cutleaf
Scientific Name
Lithospermum arvense
Amaranthus palmeri
Amaranthus powellii
Amaranthus spinosus
Aster subulatus
Galium aparine
Desmodium tortuosum
Gutierezia dracunculoides
Fagopyrum tatarium
Polygonum convolvulus
Solarium rostratum
Medicago polymorpha
Sicyos angulatus
Ranunculus arvensis
Ranunculus repens
Ranunculus muricatus
Ranunculus occidentalis
Mollugo verticillata
Silene noctiflorum
Anthemis arvensis
Anthriscus caucalis
Stellaria media
Trifo/ium spp.
Agrostemma githago
Vaccaria pyramidata
Melandrium album
Xanthium strumarium
Acalypha ostryifolia
Centaurea cyanus
Croton glandiola
Croton capitatus
Bellis perennis
Dracocephalum parviflorum
Oenothera laciniata
Camelina microcarpa
Erigeron annuus
Descurainia sophia
Fumaria officinalis
Chenopodium murale
Galeopsis tetrahit
Lamium amplexicaule
Polemonium caeruleum
Datura stramonium
Scleranthus annuus
Polygonum aviculare
Kochia scoparia
Polygonum persicaria
Chenopodium album
Claytonia perfoliata
Lactuca serriola
Malva neglecta
Hibiscus trionum
Hippurus vulgaris
Anthemis cotula
Ipomea hederacea
Ipomea purpurea
Brassica nigra
Chorispora tenella
Descurainia pinnata
Erysimum repandum
Sisymbriumm altissimum
Sinapis arvensis
Solan um nigrum
Solan um triflorum
20

Pests listed in this label (continued}
Common Name
ANNUALS (continued)
Pennycress, Field (Fanweed,
Frenchweed, Stinkweed)
Pepperweed, Virginia
(Peppergrass)
Pigweed, Prostrate
, Redroot
(Carelessweed)
, Smooth
, Tumble
Pineappleweed
Poorjoe
Puncturevine
Purslane, Common
Pusley, Florida
Radish, Wild
Ragweed, Common
, Giant (Buffaloweed)
, Lance-Leaf
Ragwort, Tansy
Rocket, London
, Yellow
Rubberweed, Bitter
Salsify
Sesbania, Hemp
Shepherdspurse
Sicklepod
Sida, Prickly (Teaweed)
Smartweed, Green
, Pennsylvania
Sneezeweed, Bitter
Sowthistle, Annual
, Spiny
Spikeweed, Common
Spurge, Prostrate
Spurry, Corn
Starbur, Bristly
Starwort, Little
Sumpweed, Rough
Sunflower, Common (Wild)
Thistle, Russian
Velvetleaf
Waterhemp, Common
,Tall
Waterprimrose, Winged
Wormwood
BIENNIALS
Burdock, Common
Carrot, Wild (Queen Anne's
Lace)
Cockle, White
Eveningprimrose, Common
Geranium, Carolina
Gromwell
Knapweed, Diffuse
, Spotted
Mallow, Dwarf
Plantain, Bracted
Ragwort, Tansy
Starthistle, Yellow
Sweetclover
Teasel
Thistle, Bull
, Musk
, Plumeless
Scientific Name
Thlaspi arvense
Lepidium virginicum
Amaranth us blitoides
Amaranthus retroflexus
Amaranthus hybridus
Amaranthus a/bus
Matricaha matricarioides
Diodia feres
Tribulus terrestris
Portu/aca oleracea
Richardia scabra
Raphanus raphanistrum
Ambrosia artemisiifolia
Ambrosia trifida
Ambrosia bidentata
Senecia jacobea
Sisymbrium irio
Barbarea vulgaris
Hymenoxys oderata
Tragopogon porrifolius
Sesbania exaltata
Capsella bursa-pastoris
Cassia obtusifolia
Sida spinosa
Polygonum scabrum
Polygonum pensylvanicum
Helenium am urum
Sonchus oleraceus
Sonchus asper
Hemizonia pungens
Euphorbia humistrata
Spergula arvensis
Acanthospermum hispidum
Stellaria graminea
Iva cilliata
Helianthus annuus
Salsola iberica
Abutilon theophrasti
Amaranthus rudis
Amaranthus tuberculatus
Ludwigia decurrens
Artemisia annua
Arctium minus
Daucus carota
Melandrium album
Oenothera biennis
Geranium carolinianum
Ljthospermum spp.
''antaurea diffusa
Cantaurea maculosa
Malva borealis
Plantago aristata
Senecio jacobaea
Centaurea solstitialis
Melilotus spp.
Dipsacus sativus
Cirsium vulgare
Carduus nutans
Carduus acanthoides
Pests listed in this label (continued)
Common Name
PERENNIALS
Alfalfa
Artichoke, Jerusalem
Aster, Spiny
, Whiteheath
Bedstraw, Smooth
Bindweed, Field
, Hedge
Blueweed, Texas
Bursage, Woollyleaf,
(Bur Ragweed, Povertyweed)
Buttercup, Tall
Campion, Bladder
Chickweed, Field
, Mouseear
Chicory
Clover, Hop
Dandelion
Dock, Broadleaf (Bitterdock)
, Curly
Dogbane, Hemp
Dogfennel (Cypressweed)
Fern, Bracken
Garlic, Wild
Goldenrod, Canada
, Missouri
Goldenweed, Common
Hawkweed
Henbane, Black
Horsenettle, Carolina
Ironweed
Knapweed, Black
, Russian
Milkweed, Common
, Honeyvine
, Western Whorled
Nettle, Stinging
Nightshade, Silverleaf (White
Horsenettle)
Onion, Wild
Plantain, Broadleaf
, Buckhorn
Pokeweed
Ragweed, Western
Redvine
Sericea Lespedeza
Smartweed, Swamp
Snakeweed, Broom
Sorrel, Red (Sheep Sorrel)
Sowthistle, Perennial
Spurge, Leafy
Sundrops
Thistle, Canada
, Scotch
Toadflax, Dalmatian
Tropical Soda Apple
Trumpetcreeper (Buckvine)
Vetch
Waterhemlock, Spotted
Waterprimrose, Creeping
Woodsorrel, Creeping
, Yellow
Wormwood, Absinth
, Louisiana
Yankeeweed
Yarrow, Common
Scientific Name
Medicago sativa
Helianthus tuberosus
Aster spinosus
Aster pilosus
Gallium mollugo
Convolvulus arvensis
Calystegia sepium
Helianthus ciliaris
Ambrosia gray/
Ranunculus acris
Silene vulgaris
Cerastium arvense
Cerastium vulgatum
Cichorium intybus
Trifoleum aureum
Taraxacum offlcinale
Rumex obtusifolius
Rumex crispus
Apocynum cannabinum
Eupatorium capillifolium
Pteridium aquilinum
Allium vineale
Solidago canadensis
Solidago missouriensis
Isocoma coronopifolia
Hieracium spp.
Hyoscyamus niger
Solanum caroliniense
Vernonia spp.
'entaurea nigra
'entaurea repens
Asclepias syriaca
Ampelamus albidus
Asclepias subverticillata
'Jrtica dio/ca
Solanum elaeagnifolium
Allium canadense
Plantago major
Plantago lanceolata
Phytolacca americana
Ambrosia psilstachya
3runnichia ovata
Lespedeza cuneata
Polygonum coccineum
3utierezia sarothrae
Rumex acetosella
Sonchus arvensis
Euphorbia esula
Oenothera perrenis
Cirsium arvense
Onopordum acanthium
Unaria genistrata
Solanum viarum
'ampsis radicans
We/a spp.
~'icuta maculata
iudwigia peploides
Oxalis corniculata
Oxa/is stricta
Artemesia absinthium
Artemesia ludoviciana
Eupatorium compositifolium
Achillea millefolium
21

t
WOODY SPECIES
Pests listed in this label (continued)
Common Name
Alder
Ash
Aspen
Basswood
Beech
Birch
Blackberry
Blackgum
Cedar
Cherry
Chinquapin
Cottonwood
Creosotebush
Cucumbertree
Dewberry
Dogwood
Elm
Grape
Hawthorn (Thornapple)
Hemlock
Hickory
Honeylocust
Honeysuckle
Hornbeam
Huckleberry
Huisache
Ivy, Poison
Kudzu
Locust, Black
Maple
Mesquite
Oak
Oak, Poison
Olive, Russian
Persimmon, Eastern
Pine
Plum, Sand (Wild Plum)
Poplar
Rabbitbrush
Redcedar, Eastern
Rose, McCartney
, Multiflora
Sagebrush, Fringed
Sassafras
Serviceberry
Spicebush
Spruce
Sumac
Sweetgum
Sycamore
Tarbush
Willow
Witchhazel
Yaupon
Yucca
Scientific Name
Alnus spp.
Fraxinus spp.
Populus spp.
Tilia americana
Fagus spp.
Betula spp.
Rubus spp.
A/yssa spp.
Cedrus spp.
Prunus spp.
Chrysolepis chrysophylla
Populus deltoides
Larrea tridentata
Magnolia acuminata
Rubus caesius
Cornus spp.
Ulmus spp.
Vitus spp.
Crataegus spp.
Tsuga spp.
Carya spp.
Gleditsia Macanthos
Lonicera spp.
Carpinus spp.
Vaccinium arboreum
Acacia farnesiana
Rhus radicans
Pueraria lobata
Robinia pseudoacacia
Acer spp.
Prosopis ruscifolia
Quercus spp.
Rhus toxicodendron
Eleaegnus angustifolia
Diospyms virginiana
Pinus spp.
Prunus amygdalis
Popu/us spp.
Chrysothamnus pulchellus
Juniperus virginiana
Rosa bracteata
Rosa multiflorum
Artemisia frigida
Sassafras albidum
Amelanchier sanguinea
Lindera benzoin
Picea spp.
Rhus spp.
Liquidamber styraciflua
Platanus occidentalis
Flourensia cernua
Salix spp.
Hamamelis macrophylla
Ilex spp.
Yucca spp.
Crops
This product can be used on the following crops:
Asparagus
Conservation Reserve Program (CRP)
Corn (not registered for use on sweet corn)
Cotton
Fallow Systems (Between-crop Applications)
Proso Millet
Pastures, Rangeland, Farmstead
Small Grains (Barley, Oat, Triticale, and Wheat)
Sod Farm Turf
Sorghum
Soybean
Sugarcane
Look inside for complete
Restrictions and Limitations and
Application Instructions.
22

Conditions of Sale and Warranty
The Directions For Use of this product reflect the
opinion of experts based on field use and tests. The
directions are believed to be reliable and must be
followed carefully. However, it is impossible to eliminate
all risks inherently associated with the use of this
product. Crop injury, ineffectiveness or other unintended
consequences may result because of such factors as
weather conditions, presence of other materials, or use
of the product in a manner inconsistent with its labeling,
all of which are beyond the control of BASF
CORPORATION ("BASF") or the Seller. To the extent
consistent with applicable law, all such risks shall be
assumed by the Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably fit for
the purposes referred to in the Directions For Use,
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER'S EXCLUSIVE REMEDY AND BASF'S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS
PRODUCT.
BASF and the Seller offer this product, and the Buyer
and User accept it, subject to the foregoing Conditions
of Sale and Warranty which may be varied only by
agreement in writing signed by a duly authorized
representative of BASF. HOB
Banvel, B a sag ran, Clear-field, Guardsman, Laddok,
Lightning, Outlook, Paramount, and Prowl are registered
trademarks of BASF.
Accent, Ally, Asana, Bladex, Express, Extrazine, Finesse,
Glean, Harmony, and Karmex are registered trademarks of
E. I. du Pont de Nemours & Company.
Amber, Ambush, Beacon, Bleep II Magnum, Caparol,
Cyclone, Dual II Magnum, Eradicane, Evik, Exceed,
Gramoxone, Peak, Princep, Spirit, Surpass, Topnotch,
Touchdown, and Warrior are registered trademarks of a
Syngenta Group Company.
Asulox, Axiom, Bronate, Buctril, Liberty, Liberty Link, and
Sencor are registered trademarks of Bayer.
Bullet, Fallow Master, Harness, Landmaster, Lariat, Lasso,
Partner, Roundup Ultra, and Roundup Ready are registered
trademarks, and Degree, Degree Xtra, and Field Master are
trademarks of Monsanto Company.
Crossbow, Curtail, FirstRate, Garlon, Kerb, Lorsban,
Stinger, and Tort/on are registered trademarks, and Hornet is a
trademark of Dow AgroSciences LLC.
Delavan is a registered trademark of Garlock International, Inc.
Furadan and Pounce are registered trademarks of FMC Corp.
Moxy is a trademark of Agrilliance LLC.
Permit is a registered trademark of Nissan Chemical
Industries, Ltd.
Select is a registered trademark ofArysta Lifescience
Corporation.
Turbo Floodjet and Turbo Teejet are registered trademarks of
Spraying Systems, Inc.
© 2012 BASF Corporation
All rights reserved.
007969-00142.20110913b.NVA 2011 -04-350-0191
Supersedes: NVA 2009-04-350-0009
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
a-BASFThe Chemical Company
23