crop-chem-docs/corpus/epa_ppls/7969-479.md

# EVERDANT HERBICIDE

- EPA Reg No: **7969-479**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Caution
- Active ingredients: Dicamba (60.8%)
- Label accepted: 2024-02-13
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00479-20240213.pdf

---
1 
 
 
February 13, 2024 
 
Jeffrey H. Birk 
Regulatory Manager 
BASF 
26 Davis Drive 
Research Triangle Park, NC 27709 
 
Subject: Notification per PRN 98- 10 – Change to Primary Brand Name 
 Product Name: Everdant Herbicide 
 EPA Registration Number: 7969-479 
 Application Da te: September 11, 2023 
 Decision Number: 595077 
 
Dear Jeffrey H. Birk: 
 
The Agency is in receipt of your Application for Pesticide Notification under Pesticide 
Registration Notice (PRN) 98-10 for the above referenced product. The Registration Division 
(RD) has conducted a review of this request for its applicability under PRN 98-10 and finds that 
the action requested falls within the scope of PRN 98-10. 
 
The label submitted with the application has been stamped “NOTIFICATION” and placed in our 
records. 
 
The product record has been updated to reflect the primary brand name is now “Everdant 
Herbicide”. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please 
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and 
Rodenticide Act (FIFRA) and is subject to review by the Agency. If the website is false or 
misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA 
section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements EPA may consider false or 
misleading. In addition, regardless of whether a website is referenced on your product’s label, 
claims made on the website may not substantially differ from those claims approved through 
the registration process. Therefore, should the Agency find or if it is brought to our attention 
that a website contains false or misleading statements or claims substantially differing from the 
EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and 
Compliance.

Page 2 of 2 
EPA Reg. No. 7969-479 
Decision No. 595077 
 
 
If you have any questions, please contact Emily Schmid by phone at 202-566-2893, or via email 
at schmid.emily@epa.gov. 
 
 
 
Sincerely, 
 
Emily Schmid, Product Manager 25 
Herbicide Branch 
Registration Division (7505P) 
Office of Pesticide Programs

For weed control in asparagus; conservation reserve programs 
(CRP); corn; cotton; fallow cropland; farmstead turf (noncropland) 
and sod farms; grass grown for seed; pasture, hay, rangeland, and 
farmstead (noncropland); proso millet; small grain; sorghum; 
soybean; and sugarcane
NOT FOR USE ON DICAMBA TOLERANT (DT) CROPS
Active Ingredient*:
dicamba: N,N-Bis-(3-aminopropyl)methylamine salt of 3,6- 
dichloro-o-anisic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 .8%
Other Ingredients: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 .2%
Total: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 .0%
* Contains 48 .38% dicamba (5 pounds acid equivalent per gallon or 600 grams per liter)
EPA Reg. No. 7969-479 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle . (If you do not understand the label, find someone to explain it to you in detail .)
See full label for complete First Aid, Precautionary Statements, Directions For Use, 
Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions .
In case of an emergency endangering life or property involving this product, 
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation 
26 Davis Drive, Research Triangle Park, NC 27709
Dicamba Group 4 Herbicide
7969-479
2/13/2024

2
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Harmful if swallowed or inhaled . Avoid breath-
ing vapor or spray mist . Remove and wash contaminated 
clothing before reuse . Wash hands thoroughly with soap 
and water after handling and before eating, drinking, 
chewing gum, using tobacco, or using the toilet .
Prolonged or frequently repeated skin contact may cause 
allergic reactions in some individuals .
Personal Protective Equipment (PPE)
All mixers, loaders, applicators, and other handlers 
must wear:
• Long-sleeved shirt and long pants
• Shoes plus socks
• Waterproof gloves
• A NIOSH-approved dust/mist filtering respirator with any 
R, P, or HE filter . Examples include a filtering facepiece 
respirator with approval number prefix TC-84A and an R 
or P designation, or a full-face or half-mask respirator 
with R, P, or HE cartridges .
See Engineering Controls for additional requirements . 
Follow the manufacturer’s instructions for cleaning and 
maintaining PPE . If no such instructions for washables 
exist, use detergent and hot water . Keep and wash PPE 
separately from other laundry .
Engineering Controls
When handlers use closed systems or enclosed cabs in a 
manner that meets the requirements listed in the Worker 
Protection Standard (WPS) for agricultural pesticides 
[40 CFR 170 .240(d)(4-6)], the handler PPE requirements 
may be reduced or modified as specified in the WPS .
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands after handling and before eating, drinking, 
chewing gum, using tobacco, or using the toilet .
• Remove clothing/PPE immediately if pesticide gets 
inside . Then wash thoroughly and put on clean clothing .
• Remove PPE immediately after handling this product . 
Wash the outside of gloves before removing . As soon 
as possible, wash thoroughly and change into clean 
clothing .
Environmental Hazards
DO NOT apply directly to water, or to areas where surface 
water is present, or to intertidal areas below the mean high 
water mark . DO NOT contaminate water when disposing 
of equipment washwater or rinsate . Apply this product only 
as directed on the label .
This chemical is known to leach through soil into ground -
water under certain conditions as a result of agricultural 
use . Use of this chemical in areas where soils are perme-
able, particularly where the water table is shallow, may 
result in groundwater contamination .
Ground and Surface Water Protection
Point-source Contamination
To prevent point-source contamination, DO NOT mix or 
load this pesticide product within 50 feet of wells (including 
abandoned wells and drainage wells), sinkholes, perennial 
or intermittent streams and rivers, and natural or impound -
ed lakes and reservoirs . DO NOT apply pesticide product 
within 50 feet of wells . This setback does not apply to 
properly capped or plugged abandoned wells and does 
not apply to impervious pad or properly diked mixing/ 
loading areas as described below .
Mixing, loading, rinsing, or washing operations performed 
within 50 feet of a well are allowed only when conducted 
on an impervious pad constructed to withstand the weight 
of the heaviest load that may be on or move across the 
pad . The pad must be self-contained to prevent surface 
water flow over or from the pad . The pad capacity must be 
maintained at 110% that of the largest pesticide container 
FIRST AID
If swallowed
• Call a poison control center or doctor immediately for treatment advice .
• Have person sip a glass of water if able to swallow .
• DO NOT induce vomiting unless told to do so by a poison control center or doctor .
• DO NOT give anything by mouth to an unconscious person .
If inhaled
• Move person to fresh air .
• If person is not breathing, call 911 or an ambulance; then give artificial respiration, preferably 
by mouth to mouth, if possible .
• Call a poison control center or doctor for further treatment advice .
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment . 
You may also contact BASF Corporation for emergency medical treatment information: 1-800-832-HELP (4357) .

3
or application equipment used on the pad and have suffi -
cient capacity to contain all product spills, equipment or 
container leaks, equipment washwater, and rainwater that 
may fall on the pad . The containment capacity does not 
apply to vehicles delivering pesticide shipments to the 
 mixing/loading site . States may have in effect additional 
requirements regarding wellhead setbacks and operational 
containment .
Care must be taken when using this product to prevent:
• Back-siphoning into wells
• Spills
• Improper disposal of excess pesticide, spray mixtures, or 
rinsate
Check valves or antisiphoning devices must be used on all 
mixing equipment .
Movement by Surface Runoff or 
Through Soil
DO NOT apply under conditions which favor runoff .
DO NOT apply if soil is saturated with water or when rain-
fall that may exceed soil field capacity is forecast to occur 
within 48 hours . Under some conditions, dicamba has the 
potential for runoff several days after application . Poorly 
draining, wet, or erodible soils with readily visible slopes 
toward adjacent sensitive areas are more prone to pro-
duce runoff . When used on erodible soils, best 
management practices for minimizing runoff should be 
employed . Consult your local Soil Conservation Service for 
recommendations in your use area .
DO NOT apply to impervious substrates such as paved or 
highly compacted surfaces in areas with high potential for 
groundwater contamination . Groundwater contamination 
may occur in areas where soils are permeable or coarse 
and groundwater is near the surface . DO NOT apply to 
soils classified as sand with less than 3% organic matter 
and where groundwater depth is shallow . To minimize the 
possibility of groundwater contamination, carefully follow 
the specified rates as affected by soil type in the 
Crop-specific Information section of this label .
Movement by Water Erosion of Treated Soil
DO NOT apply this product through any type of irrigation 
system including sprinkler, drip, flood, or furrow irrigation . 
Ensure treated areas have received at least 1/2-inch rainfall 
(or irrigation) before using tailwater for subsequent irriga-
tion of other fields .
Endangered Species
It is a federal offense to use any pesticide in a manner that 
results in the death of an endangered species .
The use of any pesticide in a manner that may kill or other-
wise harm an endangered species or adversely modify 
their habitat is a violation of federal law .
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling . This labeling must be in 
the user’s possession during application .
DO NOT apply this product in a way that will contact 
workers or other persons, either directly or through drift . 
Only protected handlers may be in the area during applica -
tion . For any requirements specific to your state or tribe, 
consult the agency responsible for pesticide regulation .
Observe all precautions, restrictions, and limitations in this 
label and the labels of products used in combination with 
this product . Keep containers closed to avoid spills and 
contamination .
All applicable directions, restrictions, precautions, and 
Conditions of Sale and Warranty are to be followed .
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and 
with the Worker Protection Standard, 40 CFR Part 170 . 
This standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and 
greenhouses, and handlers of agricultural pesticides . It 
contains requirements for training, decontamination, 
notification, and emergency assistance . It also contains 
specific instructions and exceptions pertaining to the 
statements on this label about Personal Protective 
Equipment (PPE) and restricted-entry intervals . The 
requirements in this box only apply to uses of this prod-
uct that are covered by the WPS .
DO NOT enter or allow worker entry into treated areas 
during the restricted-entry interval (REI) of 24 hours .
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that 
involves contact with anything that has been treated, 
such as, plants, soil, or water is:
• Coveralls worn over short-sleeved shirt and short 
pants
• Chemical-resistant footwear plus socks
• Waterproof gloves
• Chemical-resistant headgear for overhead exposure
• Protective eyewear
NON-AGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this prod-
uct that are NOT within the scope of the Worker 
Protection Standard for agricultural pesticides (40 CFR 
Part 170) . The WPS applies when this product is used to 
produce agricultural plants on farms, forests, nurseries, 
or greenhouses . DO NOT enter or allow people (or pets) 
to enter the treated area until sprays have dried . 
DO NOT apply this product in a way that will contact 
workers or other persons, either directly or through drift . 
Only protected handlers may be in the area during 
application .

4
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or 
disposal . Open dumping is prohibited .
Pesticide Storage
Store in original container in a well-ventilated area sepa-
rately from fertilizer, feed, and foodstuffs . Avoid 
cross-contamination with other pesticides . EverdantTM 
herbicide freezes around 15° F and is stable under con-
ditions of freezing and thawing . Product that has been 
frozen should be thawed and recirculated prior to use .
Pesticide Disposal
Wastes resulting from this product must be disposed of 
on-site or at an approved waste disposal facility . Pesti-
cide, spray mixture, or rinsate that cannot be used 
according to label instructions must be disposed of 
according to federal, state or local procedures under 
Subtitle C of the Resource Conservation and 
Recovery Act . Improper disposal of excess pesticide, 
spray mix, or rinsate is a violation of federal law .
Container Handling
Nonrefillable Container. DO NOT reuse or refill this 
container . Triple rinse or pressure rinse container (or 
equivalent) promptly after emptying; then offer for recy -
cling, if available, or reconditioning, if appropriate, or 
puncture and dispose of in a sanitary landfill, or by incin -
eration, or by other procedures approved by state and 
local authorities .
Triple rinse containers small enough to shake 
(capacity ≤ 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank 
and drain for 10 seconds after the flow begins to drip . Fill 
the container 1/4 full with water and recap . Shake for 
10 seconds . Pour rinsate into application equipment or a 
mix tank, or store rinsate for later use or disposal . Drain 
for 10 seconds after the flow begins to drip . Repeat this 
procedure two more times .
Triple rinse containers too large to shake 
(capacity > 5 gallons) as follows: Empty the remain-
ing contents into application equipment or a mix tank . Fill 
the container 1/4 full with water . Replace and tighten clo-
sures . Tip container on its side and roll it back and forth, 
ensuring at least one complete revolution, for 30 sec-
onds . Stand the container on its end and tip it back and 
forth several times . Turn the container over onto its other 
end and tip it back and forth several times . Empty the 
rinsate into application equipment or a mix tank, or store 
rinsate for later use or disposal . Repeat this procedure 
two more times .
(continued)
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and continue 
to drain for 10 seconds after the flow begins to drip . Hold 
container upside down over application equipment or mix 
tank, or collect rinsate for later use or disposal . Insert 
pressure rinsing nozzle in the side of the container and 
rinse at about 40 PSI for at least 30 seconds . Drain for 
10 seconds after the flow begins to drip .
Refillable Container. Refill this container with pesticide 
only . DO NOT reuse this container for any other purpose . 
Triple rinsing the container before final disposal is the 
responsibility of the person disposing of the container . 
Cleaning before refilling is the responsibility of the refiller .
Triple rinse as follows: To clean the container before final 
disposal, empty the remaining contents from this container 
into application equipment or mix tank . Fill the container 
about 10% full with water . Agitate vigorously or recirculate 
water with the pump for 2 minutes . Pour or pump rinsate 
into application equipment or rinsate collection system . 
Repeat this rinsing procedure two more times .
When this container is empty, replace the cap and seal all 
openings that have been opened during use; return the 
container to the point of purchase or to a designated loca-
tion . This container must only be refilled with a pesticide 
product . Prior to refilling, inspect carefully for damage 
such as cracks, punctures, abrasions, worn-out threads 
and closure devices . Check for leaks after refilling and 
before transport . DO NOT transport if this container is 
damaged or leaking . If the container is damaged, or leak-
ing, or obsolete and not returned to the point of purchase 
or to a designated location, triple rinse emptied container 
and offer for recycling, if available, or dispose of container 
in compliance with state and local regulations .
In Case of Emergency
In case of large-scale spill of this product, call:
• CHEMTREC 1-800-424-9300
• BASF Corporation 1-800-832-HELP (4357)
In case of medical emergency regarding this product, call:
• Your local doctor for immediate treatment
• Your local poison control center (hospital)
• BASF Corporation 1-800-832-HELP (4357)
Steps to take if material is released or spilled:
• Dike and contain the spill with inert material (sand, earth, 
etc .) and transfer liquid and solid diking material to sepa -
rate containers for disposal .
• Remove contaminated clothing and wash affected skin 
areas with soap and water .
• Wash clothing before reuse .
• Keep the spill out of all sewers and open bodies of water .

5
Product Information
 EverdantTM herbicide is a water-soluble herbicide that 
provides postemergence and moderate rate-dependent 
residual control of many annual broadleaf weeds . 
 Everdant is also active on many biennial and perennial 
broadleaf weeds as well as woody brush and vines (refer 
to Table 1 for weeds controlled or suppressed) .
 Everdant can be used in specific field and row crops, fal -
low and postharvest croplands, and sod farms . Everdant 
does not control grass weeds and must be used sequen -
tially or tank mixed with a grass herbicide for a complete 
weed control program . See Tank Mixing Information 
section for important information on herbicide tank mixes 
or Crop-specific Information section(s) for recommen-
dations on sequential programs .
Additional state restrictions and requirements may apply . 
The applicator must comply with any additional state 
requirements and restrictions .
Table 1. Weeds Controlled or Suppressed
 Everdant will control or suppress the following weeds 
when used at rates described in Table 2 . See additional 
information about weeds which are known to be resistant 
to dicamba at www.Resistance-Information.BASF.US .
Common Name Scientific Name
Annuals
Alkanet Lithospermum arvense
Amaranth, Palmer Amaranthus palmeri
Amaranth, Powell Amaranthus powellii
Amaranth, spiny Amaranthus spinosus
Aster, slender Aster subulatus
Bedstraw, catchweed Galium aparine
Beggarweed, Florida Desmodium tortuosum
Broomweed, common Gutierrezia dracunculoides
Buckwheat, tartary Fagopyrum tataricum
Buckwheat, wild Polygonum convolvulus
Buffalobur Solanum rostratum
Burclover, California Medicago polymorpha
Burcucumber Sicyos angulatus
Buttercup, corn Ranunculus arvensis
Buttercup, creeping Ranunculus repens
Buttercup, roughseed Ranunculus muricatus
Buttercup, western field Ranunculus occidentalis
Carpetweed Mollugo verticillata
Catchfly, nightflowering Silene noctiflorum
Chamomile, corn Anthemis arvensis
(continued)
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Annuals (continued)
Chervil, bur Anthriscus caucalis
Chickweed, common Stellaria media
Clover Trifolium spp .
Cockle, corn Agrostemma githago
Cockle, cow Vaccaria pyramidata
Cocklebur, common Xanthium strumarium
Copperleaf, hophornbeam Acalypha ostryifolia
Cornflower Centaurea cyanus
Croton, tropic Croton glandulosus
Croton, woolly Croton capitatus
Daisy, English Bellis perennis
Dragonhead, American Dracocephalum parviflorum
Eveningprimrose, cutleaf Oenothera laciniata
Falseflax, smallseed Camelina microcarpa
Fleabane, hairy Conyza bonariensis
Flixweed Descurainia sophia
Fumitory Fumaria officinalis
Goosefoot, nettleleaf Chenopodium murale
Hempnettle Galeopsis tetrahit
Henbit Lamium amplexicaule
Horseweed (Marestail) Conyza canadensis
Jacob’s-ladder Polemonium caeruleum
Jimsonweed Datura stramonium
Knawel (German moss) Scleranthus annuus
Knotweed, prostrate Polygonum aviculare
Kochia3 Kochia scoparia
Ladysthumb Polygonum persicaria
Lambsquarters, common Chenopodium album
Lettuce, miner’s Claytonia perfoliata
Lettuce, prickly Lactuca serriola
Mallow, common Malva neglecta
Mallow, Venice Hibiscus trionum
Mayweed Anthemis cotula
Morningglory, ivyleaf Ipomoea hederacea
Morningglory, tall Ipomoea purpurea
Mustard, black Brassica nigra
Mustard, blue Chorispora tenella
Mustard, tansy Descurainia pinnata
(continued)

6
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Annuals (continued)
Mustard, treacle Erysimum repandum
Mustard, tumble Sisymbrium altissimum
Mustard, wild Sinapis arvensis
Mustard, yellowtop Sinapis spp .
Nightshade, black Solanum nigrum
Nightshade, cutleaf Solanum triflorum
Pennycress, field Thlaspi arvense
Pepperweed, Virginia Lepidium virginicum
Pigweed, prostrate Amaranthus blitoides
Pigweed, redroot (rough) Amaranthus retroflexus
Pigweed, smooth Amaranthus hybridus
Pigweed, tumble Amaranthus albus
Pineappleweed Matricaria matricarioides
Poorjoe Diodia teres
Poppy, red horn Glaucium corniculatum
Puncturevine Tribulus terrestris
Purslane, common Portulaca oleracea
Pusley, Florida Richardia scabra
Radish, wild Raphanus raphanistrum
Ragweed, common Ambrosia artemisiifolia
Ragweed, giant Ambrosia trifida
Ragweed, lanceleaf Ambrosia bidentata
Rocket, London Sisymbrium irio
Rocket, yellow Barbarea vulgaris
Rubberweed, bitter Hymenoxys odorata
Salsify Tragopogon porrifolius
Senna, coffee Senna occidentalis
Sesbania, hemp Sesbania exaltata
Shepherd’s purse Capsella bursa-pastoris
Sicklepod Cassia obtusifolia
Sida, prickly (Teaweed) Sida spinosa
Smartweed, green Polygonum scabrum
Smartweed, Pennsylvania Polygonum pensylvanicum
Sneezeweed, bitter Helenium amarum
Sowthistle, annual Sonchus oleraceus
Sowthistle, spiny Sonchus asper
Spanish needles Bidens bipinnata
Spikeweed, common Hemizonia pungens
(continued)
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Annuals (continued)
Spurge, prostrate Chamaesyce humistrata
Spurry, corn Spergula arvensis
Starbur, bristly Acanthospermum hispidum
Starwort, little Stellaria graminea
Sumpweed, rough Iva ciliata
Sunflower, common (wild) Helianthus annuus
Thistle, Russian Salsola iberica
Velvetleaf Abutilon theophrasti
Waterhemp Amaranthus tuberculatus
Waterprimrose, winged Ludwigia decurrens
Wormwood Artemisia annua
Biennials
Burdock, common Arctium minus
Carrot, wild Daucus carota
Cockle, white Melandrium album
Eveningprimrose, common Oenothera biennis
Geranium, Carolina Geranium carolinianum
Gromwell Lithospermum spp .
Knapweed, diffuse Centaurea diffusa
Knapweed, spotted Centaurea maculosa
Mallow, dwarf Malva borealis
Plantain, bracted Plantago aristata
Ragwort, tansy Senecio jacobaea
Starthistle, yellow Centaurea solstitialis
Sweetclover Melilotus spp .
Teasel Dipsacus sativus
Thistle, bull Cirsium vulgare
Thistle, musk Carduus nutans
Thistle, plumeless Carduus acanthoides
Thistle, variegated (milk) Silybum marianum
Perennials1
Alfalfa Medicago sativa
Apple, tropical soda Solanum viarum
Artichoke, Jerusalem Helianthus tuberosus
Aster, spiny Aster spinosus
Aster, whiteheath Aster pilosus
Bedstraw, smooth Gallium mollugo
Bindweed, field Convolvulus arvensis
(continued)

7
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Perennials1 (continued)
Bindweed, hedge Calystegia sepium
Blueweed, Texas Helianthus ciliaris
Bursage, woollyleaf Ambrosia grayi
Buttercup, tall Ranunculus acris
Campion, bladder Silene vulgaris
Chickweed, field Cerastium arvense
Chickweed, mouseear Cerastium vulgatum
Chicory Cichorium intybus
Clover, hop Trifolium aureum
Dandelion, common Taraxacum officinale
Dock, broadleaf (Bitterdock) Rumex obtusifolius
Dock, curly Rumex crispus
Dogbane, hemp Apocynum cannabinum
Dogfennel (Cypressweed) Eupatorium capillifolium
Fern, bracken Pteridium aquilinum
Garlic, wild Allium vineale
Goldenrod, Canada Solidago canadensis
Goldenrod, Missouri Solidago missouriensis
Goldenweed, common Isocoma coronopifolia
Hawkweed Hieracium spp .
Henbane, black Hyoscyamus niger
Horsenettle, Carolina Solanum carolinense
Ironweed Vernonia spp .
Knapweed, black Centaurea nigra
Knapweed, Russian Centaurea repens
Lespedeza, sericea Lespedeza cuneata
Milkweed, climbing Sarcostemma cyanchoides
Milkweed, common Asclepias syriaca
Milkweed, honeyvine Ampelamus albidus
Milkweed, western whorled Asclepias subverticillata
Nettle, stinging Urtica dioica
Nightshade, silverleaf Solanum elaeagnifolium
Onion, wild Allium canadense
Plantain, broadleaf Plantago major
Plantain, buckhorn Plantago lanceolata
Pokeweed Phytolacca americana
Ragweed, western Ambrosia psilostachya
Redvine Brunnichia ovata
(continued)
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Perennials1 (continued)
Smartweed, swamp Polygonum coccineum
Snakeweed, broom Gutierrezia sarothrae
Sorrel, red (Sheep sorrel) Rumex acetosella
Sowthistle, perennial Sonchus arvensis
Spurge, leafy Euphorbia esula
Sundrop Oenothera perennis
Thistle, Canada Cirsium arvense
Thistle, Scotch Onopordum acanthium
Toadflax, Dalmatian Linaria genistifolia
Trumpetcreeper Campsis radicans
Vetch Vicia spp .
Waterhemlock, spotted Cicuta maculata
Waterprimrose, creeping Ludwigia peploides
Woodsorrel, creeping Oxalis corniculata
Woodsorrel, yellow Oxalis stricta
Wormwood, Louisiana Artemisia ludoviciana
Yankeeweed Eupatorium compositifolium
Yarrow, common Achillea millefolium
Woody Brush and Vines 1, 2
Alder Alnus spp .
Ash Fraxinus spp .
Basswood Tilia americana
Beech Fagus spp .
Birch Betula spp .
Cherry Prunus spp .
Chinquapin Chrysolepis chrysophylla
Cottonwood Populus deltoides
Cucumbertree Magnolia acuminata
Elm Ulmus spp .
Grape Vitus spp .
Hemlock Tsuga spp .
Hickory Carya spp .
Honeylocust Gleditsia triacanthos
Honeysuckle Lonicera spp .
Hornbeam Carpinus spp .
Huckleberry Vaccinium arboreum
Huisache Acacia farnesiana
Ivy, poison Rhus radicans
(continued)

8
Table 1. Weeds Controlled or Suppressed (continued)
Common Name Scientific Name
Woody Brush and Vines 1, 2 (continued)
Kudzu Pueraria lobata
Locust, black Robinia pseudoacacia
Maple Acer spp .
Mesquite Prosopis ruscifolia
Oak Quercus spp .
Oak, poison Rhus toxicodendron
Olive, Russian Elaeagnus angustifolia
Persimmon, eastern Diospyros virginiana
Pine Pinus spp .
Poplar Populus spp .
Rabbitbrush Chrysothamnus pulchellus
Rose, multiflora Rosa multiflorum
Sassafras Sassafras albidum
Serviceberry Amelanchier sanguinea
Spicebush Lindera benzoin
Spruce Picea spp .
Sumac Rhus spp .
Sycamore Platanus occidentalis
Tarbush Flourensia cernua
Willow Salix spp .
Witchhazel Hamamelis macrophylla
1 Suppression only .
2 Not for use in California .
3 Except dicamba resistant .
Product Stewardship Practices
• Apply EverdantTM herbicide to weeds 4 inches or less 
in size for best performance .
• Apply Everdant at the labeled rate to minimize the likeli-
hood of weed resistance occurring . DO NOT apply at 
less than the labeled rate . See Crop- specific 
 Information for labeled rates by crop .
• Use Everdant as part of a herbicide program that 
includes the use of residual herbicides and herbicides 
with alternate sites of action to reduce resistance selec-
tion pressure .
• Select nozzles that produce coarse to ultra-coarse 
spray droplets .
• Maintain boom height 24 inches or less from target .
• Identify areas of sensitive nontarget crops/plants and 
maintain proper setback distance from these areas . 
Sensitive crops in agricultural and/or residential settings 
can include, but are not limited to:
- non-DT soybeans
- cucumber and melons (EPA Crop Group 9)
- flowers
- fruit trees
- grapes
- ornamentals including greenhouse-grown and shade 
house-grown broadleaf plants
- peanuts
- peas and beans (EPA Crop Group 6)
- peppers, tomatoes, and other fruiting vegetables 
(EPA  Crop Group 8)
- potato
- sweet potato
- tobacco
• Thoroughly clean spray equipment before and after 
application .
Mode of Action
Dicamba, the active ingredient in Everdant, is a Group 4 
(WSSA) herbicide . Herbicides in this group mimic auxin (a 
plant hormone) resulting in a hormone imbalance in sensi -
tive plants that interferes with normal plant growth (e .g . cell 
division, cell enlargement, and protein synthesis) . 
 Everdant is readily absorbed by leaves, roots, and shoots; 
translocates throughout the plant; and accumulates in 
areas of active growth to provide post emergence control 
of emerged weeds as well as moderate residual control of 
germinating weed seeds .
Any weed population may contain plants naturally resistant 
to Group 4 herbicides . Weeds resistant to Group 4 herbi-
cides should be managed using effective herbicide(s) from 
a different group and/or by using cultural or mechanical 
practices . Report any incidence of non-performance of 
this product against a particular weed species at 
www.EngeniaQuestions.com . Consult your local BASF 
representative, state cooperative extension service, profes -
sional consultants, or other qualified authority to determine 
appropriate actions if you suspect resistant weeds . Addi-
tional information about weeds which are known to be 
resistant to dicamba can be found at www.Resistance- 
Information.BASF.US .
Resistance Management
While weed resistance to Group 4 herbicides is infre-
quent, populations of resistant biotypes are known to exist . 
Resistance management should be part of a diversified 
weed control strategy that integrates multiple options 
including chemical, cultural, and mechanical (tillage) con -
trol tactics . Cultural control tactics include crop rotation, 
proper fertilizer placement, optimum seeding rate/row 
spacing, and timely tillage .
To aid in the prevention of developing weeds resistant to 
this product, the following steps should be followed where 
practical:
• Start clean with tillage or an effective burndown herbi -
cide program .
• DO NOT rely on a single herbicide site of action for weed 
control during the growing season .
• Scout fields before application to ensure herbicides and 
rates will be appropriate for the weed species and weed 
sizes present .
• Apply full labeled rates of Everdant for the most 
 difficult-to-control weed in the field at the specified time

9
(correct weed size) to minimize weed escapes . See 
Crop-specific Information for labeled rates by crop .
• Use of preemergence herbicides that provide soil residual 
control of broadleaf and grass weeds is recommended to 
reduce early season weed competition and allow for more 
timely in-crop postemergence herbicide applications .
• Avoid application of herbicides with the same site of 
action more than twice a season .
• Scout fields after application to detect weed escapes or 
shifts in weed species .
• Indicators of possible herbicide resistance include: 
(1) failure to control a weed species normally controlled 
by the herbicide at the dose applied, especially if control 
is achieved on adjacent weeds; (2) a spreading patch of 
non-controlled plants of a particular weed species; 
(3) surviving plants mixed with controlled individuals of 
the same species .
• Report any incidence of non-performance of this product 
against a particular weed species to your BASF retailer or 
representative .
• If resistance is suspected, treat weed escapes with a 
herbicide having a mode of action other than Group 4 
and/or use non-chemical methods to remove escapes, 
as is practical, with the goal of preventing further seed 
production .
• For more information about weeds that are known to be 
resistant to dicamba go to 
www.Resistance-Information.BASF.US .
Additionally, users should follow as many of the following 
herbicide resistance management practices as is practical:
• Use a broad spectrum soil-applied herbicide with other 
modes of action as a foundation in a weed control 
program .
• Utilize sequential applications of herbicides with alterna -
tive modes of action .
• Rotate the use of this product with non-Group 4 
herbicides .
• Avoid making more than two applications of EverdantTM 
herbicide and any other Group 4 herbicides within a 
single growing season unless mixed with another mech -
anism of action with an overlapping spectrum for the 
difficult-to-control weeds .
• Incorporate non-chemical weed control practices, such 
as mechanical cultivation, crop rotation, cover crops and 
weed-free crop seeds, as part of an integrated weed 
control program .
• Thoroughly clean plant residues from equipment before and 
after leaving fields suspected to contain resistant weeds .
• Manage weeds in and around fields during and after har -
vest to reduce weed seed production .
• Contact the local agricultural extension service, BASF 
representative, ag retailer or crop consultant for further 
guidance on weed control practices as needed .
Crop Tolerance
Crops growing under normal environmental conditions are 
tolerant to Everdant when applied according to label 
directions . Crop injury may occur under stressful growing 
conditions (e .g . low soil fertility, seedling disease, extreme 
hot or cold weather, excessive moisture, high soil pH, high 
soil salt concentration, drought) .
Application Instructions
Apply Everdant by ground to actively growing weeds as a 
band, broadcast, or spot spray application for postemer-
gence control of emerged weeds as well as moderate 
residual control of germinating weed seeds .
Make postemergence applications of Everdant when 
broadleaf weeds are small and actively growing . An 
 adjuvant is recommended with Everdant for best post-
emergence activity; refer to Tank Mixing Information 
section and Crop-specific Information sections for 
details . Postemergence activity may be slowed or reduced 
under cloudy and/or foggy or cooler weather conditions, or 
when weeds are growing under drought or other stress 
conditions . When targeting dense weed populations and/
or larger broadleaf weeds, use higher spray volumes and a 
higher application rate within an application rate range .
Cultivation should be delayed until 7 days after applying 
 Everdant or a reduction in weed control may occur .
Use extreme care when applying Everdant to prevent 
injury to desirable plants . Everdant may cause injury to 
desirable sensitive plants when contacting their roots, 
stems, or foliage .
Application Rates
Always read and follow crop-specific use directions .
Table 2. Application Rate to Control or Suppress 
Target Weed by Weed Type and Growth Stage
 Everdant must always be tank mixed with an adjuvant 
when used for control of emerged broadleaf weeds .
(See Crop-specific Information section for additional 
directions and exceptions)

10
Weed Type and Growth Stage
Rate/Acre2,5 
(fl ozs)
Annual
Small, actively growing1 
(less than 4-inches tall) 3 .2 to 12 .8
Small, actively growing 
(less than 4-inches tall)
plus moderate residual control
12 .8
Biennial
Rosette diameter 1 to 3 inches1 6 .4 to 12 .8
Rosette diameter more than 3 inches 12 .8
Perennial3
Top growth suppression 6 .4 to 12 .8
Top growth control and root suppression 12 .8
Woody Brush and Vines 3,4
Top growth suppression 12 .8
1 Although rates below 12 .8 fl ozs/A (refer to crop-specific sec -
tions of the label for minimum use rates) may provide adequate 
control of annual and biennial weeds, for optimum performance use 
the higher listed rates or apply the lower listed rate as a tank mix with 
other herbicides that are effective on the same species and biotype .
2 Use the higher rate within listed ranges when treating weeds resis -
tant to other sites of action, dense vegetative growth, or weeds with 
a well-established root system . The higher rates also provide moder-
ate residual annual weed control .
3 Everdant TM herbicide will suppress the top growth of herbaceous 
perennial and woody brush and vines and can be combined with 
other herbicides to improve control .
4 Not for use in California .
5 DO NOT broadcast-apply more than 12 .8 fl ozs/A per application . 
Retreatment or tank mixes may be necessary for best control of 
some weeds . However, sequential applications must not exceed a 
maximum cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs dicam-
ba ae/A) per year .
Application Methods and Equipment
Apply Everdant by ground or by air . Thorough spray cov-
erage is important for best broadleaf weed control and can 
be improved with adjuvant, nozzle, and spray volume 
selection . A spray adjuvant must always be used with 
 Everdant when applying for the control of emerged 
broadleaf weeds .
Calibrate application equipment for accurate target spray 
volume and application rate to ensure uniform distribution of 
spray and to avoid spray drift to nontarget areas . Adjust 
equipment to maintain continuous agitation during spraying 
with good mechanical or bypass agitation . Avoid overlaps 
that will increase rates above the labeled use rates .
 Everdant may be applied using water; consult crop- 
specific information sections of this label for other spray 
carrier options .
Aerial Application Methods and Equipment
Water Volume: Use 1 to 10 gallons of water per acre (2 to 
20 gallons of diluted spray per treated acre for preharvest 
uses) . Use the higher spray volume when treating dense or 
tall vegetation .
Application Equipment: Select nozzles designed to pro-
duce minimal amounts of fine spray particles . Make aerial 
applications at the lowest safe height to reduce exposing 
the spray to evaporation and wind . The applicator must 
follow the most restrictive use cautions to avoid drift haz-
ards, including those found in this labeling, as well as state 
and local regulations and ordinances . DO NOT use aerial 
equipment if spray particles can be carried by the wind 
into areas where sensitive crops or plants are growing or 
when temperature inversions exist .
Ground Application
Banding Applications
When applying Everdant by banding, use the following 
formula to calculate the amount of herbicide and water vol-
ume needed:
Bandwidth in inches x Broadcast 
rate per acre = Banding herbicide 
rate per acreRow width in inches
Bandwidth in inches x Broadcast 
volume per acre = Banding water 
volume per acreRow width in inches
Broadcast Applications
Unless noted in the crop-specific information section, use 
a spray volume of 15 gallons of water or more per treated 
acre . Thorough coverage of existing vegetation is essential 
for postemergence applications; higher spray volumes may 
be necessary for optimum performance .
Wiper Applications
 Everdant may be applied through wiper application 
equipment to control or suppress actively growing broad-
leaf weeds, brush, and vines . Use a 50% solution 
containing 1 part Everdant to 1 part water .
• DO NOT apply more than 12 .8 fl ozs/A of Everdant 
[0 .5 lb dicamba acid equivalent (ae) per acre] per 
application .
• DO NOT contact desirable vegetation with herbicide solu-
tion . Wiper application may be made to crops (including 
pastures) and noncropland areas described in this label . 
EXCEPTION: DO NOT use wiper application on cotton 
or soybean .
Spray System Equipment Clean-out
The applicator must ensure that the spray system used to 
apply Everdant is clean before application . Additionally, 
small quantities of ammonium sulfate (AMS) can increase 
the volatility potential of Everdant . Be sure that any spray 
mixture from a prior application that contains AMS 
is drained and rinsed from the sprayer . After using 
 Everdant, clean all mixing and spray equipment (including 
tanks, pumps, lines, filters, screens, and nozzles) with a 
strong detergent based sprayer cleaner . Severe crop injury 
may occur if any Everdant remains in the spray equip-
ment following application and is subsequently applied to 
sensitive crops . Dispose of rinsate in compliance with 
local, state, and federal guidelines .

11
1 . After spraying, drain the sprayer (including boom and 
lines) . Avoid allowing the spray solution to remain in the 
spray boom lines overnight or for extended periods of 
time .
2 . Flush tank, hoses, boom, and nozzles with clean water . 
Open boom ends and flush if so equipped .
3 . Inspect and clean all strainers, screens, and filters .
4 . Use commercial sprayer cleaner containing strong 
detergents according to the manufacturer’s directions .
5 . Wash all parts of the tank, including the inside top sur-
face . Start agitation in the sprayer and thoroughly 
recirculate the cleaning solution for at least 15 minutes . 
All visible deposits must be removed from the spraying 
system .
6 . Flush hoses, spray lines, and nozzles with the cleaning 
solution for at least 1 minute . Remove nozzles, 
screens, and strainers, and clean separately in the 
cleaning solution after completing the above 
procedure .
 7 . Drain pump, filter, and lines .
8 . Triple rinse the complete spraying system with clean 
water .
9 . Clean and rinse the exterior of the sprayer .
10 . Appropriately dispose of all rinsate in compliance with 
local, state, and federal requirements .
Spray Drift Management
Avoiding spray drift at the application site is the responsibili-
ty of the applicator . The spray system and weather- related 
factors determine the potential for spray drift . The applicator 
is responsible for considering these factors when making 
application decisions to avoid spray drift onto nontarget 
areas .
Applicators must follow application requirements to avoid 
spray drift hazards, including those found in this labeling 
and applicable state and local regulations and ordinances . 
Where states have more stringent regulations, they must 
be observed .
All application equipment must be properly maintained and 
calibrated using appropriate carriers .
DO NOT allow herbicide solution to drip, physically drift, or 
splash onto desirable vegetation because severe injury or 
destruction to desirable broadleaf plants could result . The 
following physical spray drift management requirements 
must be followed .
Controlling Droplets
Drift potential may be reduced by applying large droplets 
that provide sufficient coverage and control . Applying larg-
er droplets can reduce drift potential, but will not prevent 
drift if the application is made improperly, or under unfa -
vorable environmental conditions (see the Temperature 
Inversions and the Wind Speed and Direction 
Requirements sections) .
• Nozzle Type - Use nozzles that produce course to ultra 
course spray droplets and minimize the production of 
fine droplets .
• Pressure - DO NOT exceed the nozzle manufacturer’s 
specified pressures . For many nozzle types, lower pres-
sure produces larger droplets . When higher flow rates 
are needed, use higher flow rate (large orifice) nozzles 
instead of increasing pressure . Ensure sprayer rate con-
troller hardware (if so equipped) does not allow pressure 
increases above the desired range .
• Spray Volume - Apply this product in a minimum of 
15 gallons of spray solution per acre . Use a higher spray 
volume when treating dense vegetation . Higher spray 
volumes may also allow the use of larger nozzle orifices 
(sizes) which produce coarser spray droplets .
• Equipment Ground Speed - Select a ground speed 
that will deliver the desired spray volume while maintain -
ing the desired spray pressure, but DO NOT exceed a 
ground speed of 15 miles per hour . Slower speeds gen-
erally result in better spray coverage and deposition on 
the target area . It is recommended that ground speed be 
reduced to 5 miles per hour when making applications to 
the edge of the treatment area .
• Spray Boom Height - Spray at the appropriate boom 
height based on nozzle selection and nozzle spacing, but 
DO NOT exceed a boom height of 24 inches above target 
pest or crop canopy . Set boom to lowest effective height 
over the target pest or crop canopy based on equipment 
manufacturer’s directions . Automated boom height con-
trollers are recommended with large booms to better 
maintain optimum nozzle to canopy height . Excessive 
boom height will increase the potential for spray drift .
• Hooded Spray Booms - Hooded spray booms are 
another tool that can be used to minimize spray drift 
potential . EverdantTM herbicide may be applied using a 
hooded spray boom in combination with approved noz-
zles; however, the applicator must ensure the 
configuration is compatible with equipment used .
Temperature Inversions
• DO NOT apply Everdant when temperature inversions 
exist at the field level .
Temperature inversions increase drift potential by reducing 
atmospheric mixing and dispersion of any suspended 
spray mixture . Suspended spray residues can move in 
unpredictable directions because of the light, variable 
winds common during inversions . Temperature inversions 
are characterized by increasing temperatures with altitude 
and are common on nights with limited cloud cover and 
light-to-no wind .
Inversions begin to form as the sun sets and often contin-
ue into the morning before surface warming . Their 
presence can be indicated by ground fog, smoke not ris-
ing, dust hanging over a road, or presence of dew or frost . 
Smoke that layers and moves laterally (under low wind 
conditions) indicates an inversion, while smoke that moves 
upward and rapidly dissipates indicates good vertical air 
mixing . Inversion conditions typically dissipate with 
increased winds (above 3 MPH) or when surface air begins 
to warm (3° F from morning low) .

12
Treatment Zone Awareness (Sensitive Areas, 
Sensitive Crops and Residential Areas)
Sensitive Areas
 EverdantTM herbicide should only be applied when there 
is low potential for drift to sensitive areas (see Definitions) . 
It is best to apply when the wind is blowing away from sen-
sitive areas .
Sensitive Crops and Residential Areas
• DO NOT apply under circumstances where spray drift 
may occur to food, forage, or other plantings that might 
be damaged or the crops thereof rendered unfit for sale, 
use or consumption .
• During application and sprayer clean-out, DO NOT allow 
contact of herbicide with foliage, green stems, exposed 
non-woody roots of crops, and desirable plants .
• Downwind and Shifting Winds
- DO NOT apply when wind is blowing in the direction of 
neighboring sensitive crops or residential areas .
- The appropriate distance must be determined by 
the applicator relative to where the application is being 
made, the environmental conditions, and the potential 
risk to downwind sensitive crops and residential areas .
- The applicator also must be aware that WIND 
 DIRECTION may vary during the application . If wind 
direction shifts such that the wind is blowing toward 
neighboring sensitive crops or residential areas, STOP 
the application .
Survey the area before spraying: Small amounts of 
spray drift that may not be visible may injure sensitive 
broadleaf plants . Before making an application, the appli-
cator must survey the application site for neighboring 
sensitive crops and residential areas . The applicator must 
consult sensitive crop registries where available . Plant inju-
ry could occur if contact between this product and these 
crops/plants occurs . See www.driftwatch.org or other 
sensitive crop registry websites for more information on 
possible sensitive sites near your application location .
AVOIDING SPRAY DRIFT AT THE APPLICATION SITE 
IS THE RESPONSIBILITY OF THE APPLICATOR.
The interaction of equipment and weather related factors 
must be monitored to maximize performance and on- 
target spray deposition . The applicator is responsible for 
considering all of these factors when making a spray deci -
sion . The applicator is responsible for compliance with 
state and local pesticide drift regulations .
Definitions
• Sensitive Areas - Bodies of water and nonresidential, 
uncultivated areas that may harbor sensitive plant 
species .
• Sensitive Crops and Residential Areas - Food, 
 forage, or other plantings grown for sale, use or con-
sumption . Sensitive crops/plants also can be present in 
nonagricultural settings, such as residential areas . 
 Examples include, but are not limited to:
- non-DT soybeans
- cucumber and melons (EPA  Crop Group 9 )
- flowers
- fruit trees
- grapes
- ornamentals including greenhouse-grown and shade 
house-grown broadleaf plants
- peanuts
- peas and beans (EPA  Crop Group 6 )
- peppers, tomatoes, and other fruiting vegetables 
(EPA  Crop Group 8 )
- potato
- sweet potato
- tobacco
Severe injury or destruction could occur if any contact 
between this product and these crops/plants occurs .
Wind Speed and Direction Requirements
• Wind Speed - 3 to 15 mph
• Wind Direction - Local terrain can influence wind pat-
terns . Every applicator must be familiar with local wind 
patterns and how they affect drift .
Tank Mixing Information
 Everdant may be tank mixed with other products that are 
not prohibited on this label and are approved for use on 
the target crop or area .
A spray adjuvant should always be used with Everdant 
when applying for the control of emerged broadleaf 
weeds .
To improve postemergence weed control with Everdant, a 
Chemical Producers and Distributors Association (CPDA) 
certified adjuvant may be used . Some adjuvants have the 
potential to cause crop injury under certain conditions, at 
certain growth stages and/or under other circumstances . 
Read all labels for products used in the tank mixture prior 
to use to determine the potential for crop injury .
Surfactants and Spreaders
Nonionic Surfactants/Spreaders (NIS)
Use an agriculturally approved nonionic surfactant 
 (containing at least 80% active ingredient) at 1 to 
2 pints/100 gallons [0 .12 to 0 .25% volume/volume (v/v)] . 
Use the highest rate of NIS when using the lower rate 
ranges of a tank mix or when treating more mature and 
difficult-to-control weeds or dense vegetative growth .
OR
Oil Concentrate Surfactants 
(COC, HSOC, MSO)*
Instead of NIS, oil concentrate may be used at 1 to 
2 quarts/100 gallons (0 .5% to 1% v/v), but at least 
 1 pint/acre . (alternate text: DO NOT use oil concentrate for 
postemergence in-crop applications unless specifically

13
allowed in the Crop-specific Information section of this 
label) .
A crop oil concentrate must contain either a petroleum-oil 
or vegetable-oil base and must:
• Be non-phytotoxic
• Contain only EPA-exempt ingredients
• Provide good mixing quality in the jar test
• Be successful in local experience
Petroleum-oil and vegetable-oil concentrates should con -
tain emulsifiers to provide good mixing quality . Highly 
refined vegetable oils have proven more satisfactory than 
unrefined vegetable oils .
* COC - crop oil concentrate 
HSOC - high surfactant oil concentrate 
MSO - methylated seed oil
Warnings and Restrictions:
• Some COC, HSOC and MSO adjuvants may cause a 
temporary crop response .
• DO NOT tank mix products containing ammonium salts 
such as ammonium sulfate and urea ammonium nitrate 
(UAN) .
• DO NOT add adjuvants that will further decrease pH or 
acidify the spray solution .
• Spray mixtures with lower pH levels (less than pH 5) can 
increase the potential volatility of dicamba . To mitigate 
this potential it is important to know the pH of your spray 
mixture and make appropriate adjustments . Talk with 
your local agricultural consultant, extension agent, or 
BASF representative for recommendations to prevent 
low pH spray mixtures .
• Use of an approved neutral buffering agent may be warrant-
ed if the water source or tank mix components will create 
an acidic spray solution less than pH 5 . Possible ways to 
check the pH of the spray mixture is with a litmus paper test 
or pH meter . If the pH needs to be increased then consider 
using an approved neutral buffering agent .
• Hard water does not usually affect the activity of 
 EverdantTM herbicide; however, other tank mix compo-
nents may be adversely affected (e .g . glyphosate) . Use of 
an approved conditioning agent should be considered 
when hard water (i .e . total calcium, magnesium, and iron 
content above 500 ppm) is used as a spray carrier .
• Drift reduction agents can minimize the percentage of 
driftable fines . However, the applicator must check with 
the DRA manufacturer to determine if the DRA will work 
effectively with the spray nozzle, the spray pressure, and 
the desired spray solution .
Refer to the tank mix product labels to confirm that the 
respective tank mix products are registered for the specific 
crop use; follow required crop rotation restrictions . Read 
and follow the applicable restrictions and limitations and 
Directions For Use on all product labels involved in tank 
mixing . Always follow the most restrictive label use direc-
tions; refer to crop-specific information section for details . 
Mixing Everdant with postemergence grass (graminicide) 
herbicides may reduce the effectiveness of those prod -
ucts . Follow graminicide label when mixing with Everdant 
to ensure optimum weed control . Physical incompatibility, 
reduced weed control, or crop injury may result from 
 mixing Everdant with other pesticides, additives, nutrition-
als, etc .
Compatibility Test for Mix Components
Before mixing components, always perform a compatibility 
jar test .
1 . For 20 gallons per acre spray volume, use 3 .3 cups 
(800 mL) of water . For other spray volumes, adjust rates 
accordingly . Only use water from the intended source at 
the source temperature .
2 . Add components in the sequence indicated in the fol -
lowing Mixing Order instructions using 2 teaspoons for 
each pound or 1 teaspoon for each pint of labeled use 
rate per acre .
3 . Cap the jar and invert 10 cycles between component 
additions .
4 . When the components have all been added to the jar, 
let the solution stand for 15 minutes .
5 . Evaluate the solution for uniformity and stability . The 
spray solution should not have free oil on the surface; 
fine particles that precipitate to the bottom; or thick 
(clabbered) texture . If the spray solution is not 
 compatible, repeat the compatibility test with the 
 addition of a suitable compatibility agent . If the solution 
is then compatible, use the compatibility agent as 
directed on its label . If the solution is still incompatible, 
DO NOT mix the ingredients in the same tank .
Mixing Order
Make sure each component is thoroughly mixed and sus -
pended before adding tank mix partners . Except when 
mixing products in PVA bags, maintain constant agitation 
during mixing and application .
1 . Water - Begin by agitating a thoroughly clean sprayer 
tank 1/2 to 3/4 full of clean water .
2 . Inductor - If an inductor is used, rinse it thoroughly 
after each component has been added .
3 . Products in PVA bags - Place any product contained 
in water-soluble PVA bags into the mixing tank . Wait 
until all water-soluble PVA bags have fully dissolved and 
the product is evenly mixed in the spray tank before 
 continuing .
4 . Water-soluble products and additives ( Everdant)
5 . Water-dispersible products (such as dry flowables, 
wettable powders, suspension concentrates, or 
suspo-emulsions)
6 . Emulsifiable concentrates (including NIS and oil 
 concentrate)
7 . Remaining quantity of water
Maintain continuous and constant agitation throughout mix-
ing and application until spraying is completed . If the spray 
mixture is allowed to settle for any period of time, thorough 
agitation is essential to resuspend the mixture before spray-
ing is resumed . Continue agitation while spraying .

14
Use Precautions
• Stress - Application to crops under stress because of 
lack of moisture, hail damage, flooding, herbicide injury, 
mechanical injury, or widely fluctuating temperatures may 
result in crop injury .
• Rainfast Period - EverdantTM herbicide is rainfast 
4 hours after application . Postemergence activity may be 
reduced if rain or irrigation occurs within 4 hours of 
application .
Use Restrictions
Applicator MUST ALSO follow restrictions under 
Crop-specific Information section(s).
• Maximum Seasonal Use Rate - Refer to crop-specific 
information sections for maximum seasonal application 
rates for each crop or use pattern .
• DO NOT apply Everdant with ammonium- containing 
additives, conditioners, or fertilizers (e .g . AMS, UAN) . 
Small quantities of AMS can greatly increase the volatility 
potential of dicamba .
• DO NOT apply Everdant if wind speed is greater than 
15 mph .
• DO NOT contaminate irrigation ditches or water used for 
domestic purposes .
• DO NOT apply Everdant through any type of irrigation 
system (e .g . chemigation) .
• DO NOT tank mix Everdant with Lorsban® 
insecticide .
• DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound 
dicamba ae/A) in a single application of Everdant .
• DO NOT apply more than a maximum cumulative total of 
2 pounds dicamba ae/A from all product sources per 
cropping season .
Crop Rotation Restrictions
Use the following information to determine the required 
interval between Everdant application and rotational crop 
planting as well as replanting after crop failure because of 
environmental factors such as drought, frost, or hail . Deter-
mine the rotational crop interval for tank mix products and 
use the most restrictive interval of all products applied .
Table 3. Crop Rotation Restrictions by Application Rate
Crop
 Everdant 
(fl ozs/A)
≤ 6 .4 9 .6 12 .8
Rotational Crop Interval 1 
(days after application)
Corn 0 0 0
Cotton, non-DT2 21† 28 42
Cotton, DT 0 0 0
Sorghum 14 21 28
Soybean, non-DT2 14 21 28
Soybean, DT 0 0 0
Grasses3 
30 inches or more annual precipitation 14 21 28
Grasses3 
less than 30-inches annual precipitation 21 28 42
All other crops 120 120 120
1 DO NOT include time when the soil is frozen and days before receiving any required rainfall or overhead irrigation .
2 Following application of Everdant and a minimum accumulation of 1 inch of rainfall or overhead irrigation, observe the indicated waiting interval .
3 Includes barley, oats, wheat, and other grass crops . Small grains may be planted with no waiting interval following Everdant applied at 
3 .2 fl ozs/A .
† Missouri and Tennessee Only. Following application of Everdant , wait until an accumulation of 1 inch of rainfall or irrigation followed by an 
interval of 14 days per 6 .4 fl ozs/A or less before planting cotton . This interval must be observed before planting cotton or severe crop injury may 
occur .

15
 EverdantTM herbicide 
Crop-specific Use Directions
Read product information, application instructions, weeds 
controlled, and additive instructions in preceding sections 
of the label .
Depending on specific crop application directions, 
 Everdant may be applied for postemergence control of 
emerged broadleaf weeds and/or residual control of 
 germinating broadleaf weed seeds before crop planting 
(preplant and/or preseed) and after planting (pre -
emergence, postemergence) . Refer to Table 1 for list of 
weeds controlled or suppressed .
Asparagus
 Everdant may be applied immediately after cutting aspar-
agus but at least 24 hours before the next cutting . Apply 
6 .4 to 12 .8 fl ozs/A of Everdant in 40 to 60 gallons of dilut-
ed spray to emerged and actively growing weeds . Apply 
12 .8 fl ozs/A of Everdant to control common chickweed, 
field bindweed, nettleleaf goosefoot, and wild radish . To 
improve control of Canada thistle and field bindweed, 
apply Everdant in combination with glyphosate 
(e .g .  Roundup® herbicide) or sequentially with 2,4-D . 
Avoid application to emerged spears . If spray contacts 
emerged spears, crooking (twisting) of some spears may 
result . If crooking occurs, discard affected spears . 
Asparagus Restrictions
• DO NOT apply over the top to emerged spears or ferns
• DO NOT apply more than a total of 12 .8 fl ozs/A of 
 Everdant (0 .5 pound dicamba ae/A) per year in 
 asparagus .
• DO NOT harvest for 24 hours after treatment .
• DO NOT use in the Coachella Valley of California .
Between Crop Application
 Everdant may be used as a burndown treatment to con-
trol broadleaf weeds at any time of the year during the 
fallow period following crop harvest and before the follow -
ing crop is planted . Apply Everdant as a broadcast or 
spot treatment to emerged and actively growing weeds 
after crop harvest (postharvest) and before a killing frost, 
or in fallow cropland or crop stubble the following spring or 
summer . 
Application Rates and Timings
Apply Everdant as a broadcast or spot treatment at 3 .2 to 
12 .8 fl ozs/A plus specified adjuvants; see Tank Mixing 
Information section for details . Refer to Table 2 to deter-
mine use rates for specific targeted weed species . For 
best performance, apply Everdant when annual weeds 
are less than 4-inches tall, when biennial weeds are in the 
rosette stage, and to perennial weed regrowth in late 
 summer or fall following a mowing or tillage treatment . For 
the most effective control of upright perennial broadleaf 
weeds such as Canada thistle and Jerusalem artichoke, 
apply Everdant when the majority of weeds have at least 
4 inches of regrowth, or for weeds such as field bindweed 
and hedge bindweed that are in or beyond the full bloom 
stage .
Avoid disturbing treated areas following application . Treat-
ments may not kill weeds that develop from seed or 
underground plant parts, such as rhizomes or bulblets, 
after the effective period for Everdant . For seedling con-
trol, a follow-up program or other cultural practices should 
be instituted . For small grain in-crop uses of Everdant, 
refer to Small Grain section for details .
Specific crop rotation intervals must be observed between 
an application of Everdant and planting the following 
crop; see Crop Rotation Restrictions in Use 
 Restrictions section .
Use with Other Herbicides
Broad-spectrum burndown control of grass weeds and/or 
additional broadleaf weeds requires another herbicide . 
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Distinct ® herbicide
• Facet® L herbicide
• Outlook® herbicide
• Sharpen® powered by Kixor® herbicide
• Verdict® powered by Kixor® herbicide
• 2,4-D
• glyphosate (e .g . Roundup)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
Between Crop Application Restrictions 
• DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound 
 dicamba ae/A) in a single application of Everdant as a 
between crop application .
• DO NOT apply more than a maximum cumulative total of 
2 pounds dicamba ae/A from all product sources per 
cropping season . 
Conservation Reserve Program (CRP)
 Everdant may be used on both newly seeded and estab -
lished grasses grown in the Conservation Reserve or 
federal Set-Aside Programs . Treatment with Everdant will 
injure or may kill alfalfa, clovers, lespedeza, wild winter 
peas, vetch, and other legumes .

16
Application Rates and Timings
 EverdantTM herbicide may be applied at 3 .2 to 
12 .8 fl ozs/A; refer to Table 2 for rates based on target 
weed type and growth stage . 
Newly Seeded Areas
 Everdant may be applied either preplant or postemer-
gence to newly seeded grasses or small grain including 
barley, oats, rye, sudangrass, wheat, or other grain spe-
cies grown as a cover crop . Postemergence application 
may be made after seedling grasses exceed the 3-leaf 
stage .
Preplant Intervals. Preplant applications at 12 .8 fl ozs/A 
may injure new seedings if the interval between application 
and grass planting is less than:
• 20 days - 30 inches or more annual precipitation
• 45 days - less than 30-inches annual precipitation
Established Grass Stands
Established grass stands are perennial grasses planted 
one or more seasons before treatment . Certain species 
(bentgrass, buffalograss, carpetgrass, St . Augustinegrass, 
or smooth brome) may show a response when treated 
with Everdant .
Use with Other Herbicides 
Broad-spectrum control of broadleaf and grass weeds 
requires another herbicide . Everdant may be applied 
sequentially with one or more of, but not limited to, the fol-
lowing herbicide products:
• Facet® L herbicide
• atrazine
• glyphosate (e .g . Roundup® herbicide)
• paraquat (e .g . Gramoxone® SL herbicide)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
CRP Restrictions
• DO NOT apply more than 12 .8 fl ozs/A of Everdant per 
application .
• DO NOT apply more than a maximum cumulative total of 
51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) per 
 season . 
• Everdant may injure newly seeded grasses and certain 
species, such as bentgrass, buffalograss, carpetgrass, 
St . Augustinegrass, or smooth brome .
Corn (field, seed, silage) and Popcorn
 Everdant may be applied preplant surface, pre -
emergence, or postemergence to corn . Corn in this label 
refers to conventional corn (grown for grain, seed, or 
silage) and popcorn . Before applying Everdant to seed 
corn or popcorn, verify with your local seed company 
(supplier) the selectivity of Everdant on your inbred line or 
hybrid to help avoid potential injury to sensitive inbreds or 
hybrids .
 Everdant is not registered for use on sweet corn.
Direct contact of Everdant with corn seed must be avoid-
ed . If corn seeds are less than 1 .5 inches below the soil 
surface, delay application until corn has emerged . 
Postemergence applications of Everdant to corn during 
periods of rapid growth may result in temporary leaning . 
Corn will usually become erect within 3 to 7 days . To avoid 
breakage, delay cultivation until after corn is growing 
 normally .
Application Rate
 Everdant application rates vary by soil texture, organic 
matter, and application timing . Refer to Table 4 for 
 Everdant application rates by application timing . Up to 
2 applications of Everdant may be made during a growing 
season . Sequential applications must be separated by 
2 weeks or more .

17
Table 4. EverdantTM herbicide Application Rates for Corn
Soil Texture Organic Matter
Application Rate 
(fl ozs/A)
Preplant/
Preemergence 2 Preemergence Postemergence
No Tillage Conventional/
Reduced Tillage Early3 Late4
Coarse1 All 6 .4 NA 6 .4 6 .4
Medium/Fine 2 .5% or less 6 .4 NA 6 .4 to 12 .8 6 .4
Medium/Fine more than 2 .5% 12 .8 12 .8 6 .4 to 12 .8 6 .4
1 Coarse soil types include sand, loamy sand, or sandy loam .
2 Use only preemergence applications in conventional and reduced tillage systems .
3 Apply between corn emergence and the 5-leaf stage or 8-inches tall, whichever comes first . Use crop oil concentrate only in dry conditions when 
corn is less than 5-inches tall and when applying Everdant alone or tank mixed with atrazine .
4 Apply in corn that is 8-inches to 36-inches tall or up to 15 days before tassel emergence, whichever comes first .
NA - not applicable
Application Timing
Preplant (up to 14 days before planting) 
and Preemergence Applications in 
No Tillage Corn
 Everdant can be applied to emerged weeds before, 
during, or after planting a corn crop . When planting into a 
legume sod (e .g . alfalfa or clover), apply Everdant after 
4 inches of regrowth . For application rates, refer to 
Table 4 .
Preemergence Applications in 
Conventional or Reduced Tillage Corn
 Everdant may be applied after planting and before corn 
emergence; refer to Table 4 for application rates . 
Preemergence application of Everdant does not require 
mechanical incorporation to become active . A shallow 
mechanical incorporation is recommended if the applica -
tion is not followed by adequate rainfall or sprinkler 
irrigation . Avoid tillage equipment (e .g . drags, harrows) that 
concentrates treated soil over seed furrow or seed dam-
age could result .
Postemergence Applications 
(all tillage systems)
Apply early postemergence treatment between corn 
 emergence and the 5-leaf stage or 8-inches tall, whichever 
comes first . Apply later applications when corn is 8-inches 
to 36-inches tall, or up to 15 days before tassel 
 emergence, whichever comes first . Apply as a directed 
spray when corn leaves prevent proper spray coverage . 
Application rates vary by application timing; refer to 
Table 4 for specific postemergence application rates .
Use with Other Herbicides
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Armezon® herbicide
• Armezon® PRO herbicide
• Outlook® herbicide
• Prowl® H2O herbicide
• Sharpen® powered by Kixor® herbicide
• Verdict® powered by Kixor® herbicide
• Zidua® herbicide
• atrazine
• glyphosate (e .g . Roundup® herbicide)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
NOTE: Refer to tank mix product labels to confirm the 
respective tank mix products are registered for use on 
specific corn types . Not all corn products are registered on 
popcorn and seed corn .
Corn and Popcorn Restrictions
• DO NOT apply more than 12 .8 fl ozs/A (0 .5 pound 
dicamba ae/A) in a single application of Everdant .
• DO NOT apply more than a maximum cumulative total of 
1 .5 pounds dicamba ae/A from all product sources per 
cropping season . 
• Corn or popcorn forage and silage may be harvested, 
fed, or grazed when the crop has reached the ensilage 
(milk) stage or later in maturity . 
• Everdant is not registered for use on sweet corn.

18
Cotton
Before planting cotton, EverdantTM herbicide may be 
used early preplant for burndown of actively growing 
broadleaf weeds; refer to Table 1 for weeds controlled or 
 suppressed .
Cotton gin byproducts may be fed to livestock .
Application Rates and Timings
Apply Everdant as a broadcast spray up to 6 .4 fl ozs/A 
plus specified adjuvants; refer to Tank Mixing 
 Information section for details . For best performance, 
apply Everdant when weeds are less than 4 inches in 
height and rosettes are less than 2-inches across .
Following application of Everdant, wait until an accumula-
tion of 1 inch of rainfall or irrigation followed by an interval 
of 21 days per 6 .4 fl ozs/A or less before planting cotton . 
This interval must be observed before planting cotton or 
severe crop injury may occur .
Missouri and Tennessee Only. Following application of 
 Everdant, wait until an accumulation of 1 inch of rainfall or 
irrigation followed by an interval of 14 days per 6 .4 fl ozs/A 
or less before planting cotton . This interval must be 
observed before planting cotton or severe crop injury may 
occur .
Use with Other Herbicides
Broad-spectrum postemergence control of grass weeds or 
additional broadleaf weeds requires another herbicide 
such as glyphosate . Everdant may be tank mixed or 
applied sequentially with one or more of, but not limited to, 
the following herbicide products:
• Sharpen® powered by Kixor® herbicide
• glyphosate (e .g . Roundup® herbicide)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
Cotton Restrictions
• DO NOT apply to dicamba tolerant (DT) cotton .
• DO NOT apply more than 6 .4 fl ozs/A (0 .25 pound 
 dicamba ae/A) of Everdant per year (single growing 
 season) .
• DO NOT apply preplant to cotton west of Interstate 25 .
• DO NOT make Everdant preplant application to cotton 
in geographic areas with average annual rainfall less than 
25 inches .
• DO NOT apply more than 1 .5 pounds dicamba acid 
equivalent per acre for the combination of treatments if 
applying a spring preplant treatment following application 
of a fall preplant (postharvest) treatment .
Grass Grown for Seed
 Everdant may be used to control annual and perennial 
broadleaf weeds after weed emergence . For best perfor-
mance, apply Everdant when weeds are less than 
4 inches in height and rosettes are less than 2-inches 
across . Apply Everdant at 6 .4 to 12 .8 fl ozs/A plus speci-
fied adjuvants to seedling grasses after the crop reaches 
3-leaf to 5-leaf stage; see Tank Mixing Information 
 section for details . Apply up to 12 .8 fl ozs/A of Everdant 
on well-established perennial grasses . Use the higher rate 
of the listed rate range when treating more mature weeds 
or dense vegetative growth .
Use with Other Herbicides
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Facet® L herbicide
• Prowl® H2O herbicide
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
Grass Grown for Seed Restrictions
• DO NOT apply Everdant after grass seed crop begins 
to joint .
• DO NOT apply more than 12 .8 fl ozs/A of Everdant 
(0 .5 lb dicamba ae/A) per application or a cumulative 
total of 51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) 
per season . 
• Refer to Table 5 for grazing restrictions .
Pasture, Hay, Rangeland, and 
Farmstead (noncropland)
 Everdant may be used on pasture, hay, rangeland, and 
farmstead including fencerows and nonirrigation ditch -
banks for control or suppression of broadleaf weed and 
woody brush and vine species listed in Table 1. Everdant 
uses described in this section also refer to small grain 
grown for forage pasture use (rye, sorghum, sudangrass, 
or wheat) . Grazing and harvest intervals are shown in 
Table 5 .
 Everdant may also be applied to noncropland areas to 
control broadleaf weeds in noxious weed control pro-
grams, districts, or areas including broadcast or spot 
treatment of roadsides, highways, utilities, railroad, and 
pipeline rights-of-way . Noxious weeds must be recognized 
at the state level, but programs may be administered at 
state, county, or other level .

19
Application Rates and Timings
Refer to Table 2 for rate selection based on targeted weed 
or brush species . Some weed species will require a tank 
mix partner for adequate control . Retreatments may be 
applied as needed .
DO NOT apply more than 25 .6 fl ozs/A of EverdantTM 
herbicide during a growing season .
DO NOT apply more than 12 .8 fl ozs/A of Everdant during 
a growing season on small grain grown for pasture and 
newly seeded areas .
Established grass crops growing under stress can exhibit 
various injury symptoms that may be more pronounced if 
herbicides are applied . Bentgrass, buffalograss, carpet-
grass, and St . Augustinegrass may show a response . 
Usually, colonial bentgrasses are more tolerant than creep -
ing types . Velvetgrasses are most easily injured . 
Treatments will injure or kill alfalfa, clovers, lespedeza, wild 
winter peas, vetch, and other legumes . 
Spray volume may range from 10 to 600 gallons per acre . 
The volume of spray applied depends on the height, densi -
ty, and type of weeds or brush being treated and on the 
type of equipment used . Everdant may be applied as a 
spot treatment to individual clumps or small areas of unde -
sirable vegetation using a handgun or similar type of 
application equipment . Apply diluted sprays to allow com-
plete wetting (up to runoff) of foliage and stems .
Table 5. Grazing and Haying Restrictions for 
 Lactating Dairy Animals after Everdant Treatment
 Everdant Rate 
(fl ozs/A)
Days before
Grazing
Days before
Hay Harvest
Up to 12 .8 7 37
Cut-surface Treatment
 Everdant may be applied as a cut-surface treatment for 
control of unwanted trees and prevention of sprouts of cut 
trees . Mix 1 part Everdant with 1 to 3 parts water to cre-
ate the application solution . Use the lower dilution rate 
when treating difficult-to-control species .
• Frill or Girdle Treatment - Using an axe to girdle tree 
trunk, make a continuous cut or a series of overlapping 
cuts . Spray or paint the cut surface with the solution .
• Stump Treatment - Spray or paint freshly cut surface 
with the water mix . Thoroughly wet the area adjacent to 
the bark .
Dormant Multiflora Rose Applications
 Everdant can be applied as an undiluted spot treatment 
directly to the soil or as a Lo-Oil basal bark treatment using 
an oil-in-water emulsion solution when plants are dormant .
Spot Treatment Applications
Spot treatment application of Everdant should be applied 
directly to the soil as close as possible to the root crown 
within 6 inches to 8 inches of the crown . On sloping ter-
rain, apply Everdant to the uphill side of the crown . 
DO NOT apply when snow or water prevents applying 
 Everdant directly to the soil . The use rate of Everdant 
depends on the canopy diameter of the multiflora rose . 
Example Everdant use rates:
• 0 .25 fl oz per 5-feet canopy diameter
• 1 .0 fl oz per 10-feet canopy diameter
• 2 .35 fl ozs per 15-feet canopy diameter
Lo-Oil Basal Bark Treatment
For Lo-Oil basal bark treatments, apply Everdant to the 
basal stem region from the ground line to a height of 
12 inches to 18 inches . Spray until runoff, with special 
emphasis on covering the root crown . For best results, 
apply Everdant when plants are dormant .
• DO NOT apply after bud break or when plants are 
showing signs of active growth .
• DO NOT apply when snow or water prevents applying 
 Everdant to the ground line .
Lo-Oil Spray Solution Preparation
1 . Combine 1 .5 gallons of water, 1 oz of emulsifier, 
12 .8 fl ozs of Everdant, and 2 .5 pints of No . 2 diesel 
fuel . 
2 . Adjust the amounts of materials used proportionately to 
the amount of final spray solution desired .
DO NOT apply more than 8 gallons/A of Lo-Oil spray solu-
tion mix per year . 
Use with Other Herbicides
Broad-spectrum control of broadleaf and grass weeds 
requires another herbicide . Everdant may be applied 
sequentially with one or more herbicide products:
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
Pasture, Hay, Rangeland, and 
Farmstead (noncropland) Restrictions 
• DO NOT apply more than a maximum cumulative total of 
25 .6 fl ozs/A of Everdant (1 lb dicamba ae/A) during a 
growing season .
• DO NOT apply more than a maximum cumulative total of 
12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) to small 
grain grown for pasture and to newly seeded areas .
Proso Millet
For use only within Colorado, Nebraska, 
North Dakota, South Dakota, and Wyoming
Apply Everdant and 2,4-D sequentially to provide control 
or suppression of annual broadleaf weeds; see Table 1 .

20
Apply 3 .2 fl ozs/A of EverdantTM herbicide sequentially 
with 0 .375 lb acid equivalent of 2,4-D per acre . Apply as a 
broadcast or spot treatment to emerged and actively 
growing weeds and when proso millet is in the 2-leaf to 
5-leaf stage . Use directions for 2,4-D products vary with 
manufacturers; refer to a 2,4-D product with labeling con-
sistent with the crop-stage timing for Everdant . Some 
types of proso millet may be affected adversely by a 
sequential application of Everdant and 2,4-D .
Proso Millet Restrictions
• DO NOT apply unless possible proso millet crop injury 
will be acceptable . 
• DO NOT apply more than 3 .2 fl ozs/A of Everdant 
(0 .125 lb dicamba ae/A) per season in proso millet . 
• Refer to Table 5 for grazing restrictions .
Small Grain 
(barley, oats, triticale, and wheat)
 Everdant may be applied before, during, or after planting 
small grain (barley, oats, triticale, and wheat) . Refer to 
 Application Rates and Timings for specific small grain 
crop uses . For best performance, apply Everdant when 
weeds are less than 4 inches in height and rosettes are less 
than 2-inches across . Applying Everdant to small grain 
during periods of rapid growth may result in crop leaning; 
this condition is temporary and will not reduce crop yield . 
Restrictions for small grain areas grazed or cut for hay are 
indicated in Table 5 in Pasture, Hay, Rangeland, and 
Farmstead (noncropland) section of this label . 
Application Rates and Timings
Early Season Applications
Table 6. Early Season Application Rate and 
Growth Stage in Small Grain 1
Crop
Fall-seeded Spring-seeded
Rate 
(fl ozs/A)
Growth 
Stage
Rate 
(fl ozs/A)
Growth 
Stage 
(up to)
Barley2, 3
1 .6 to 3 .2 before 
joint
1 .6 to 2 .4 4-leaf
Oats3 1 .6 to 3 .2 5-leaf
Triticale 1 .6 to 3 .2 6-leaf
Wheat4 1 .6 to 3 .2 6-leaf
1 An adjuvant system should be used with all Everdant applications; 
refer to Tank Mixing Information section for details . DO NOT use oil 
concentrates for postemergence in-crop application . 
2 For spring barley varieties seeded during winter months or later, follow 
the rate and timing given for spring-seeded barley . 
3 DO NOT tank mix Everdant with 2,4-D in oats or early season applica -
tion on spring-seeded barley .
4 Early developing wheat varieties must receive application between early 
tillering and the joint stage; ensure that the application occurs before 
the jointing stage . 
Fall-seeded Wheat ONLY
Western Oregon. When applied in the spring, Everdant 
may be used at rates up to 4 .8 fl ozs/A on fall-seeded 
wheat . Periods of extended stress such as cold and wet 
weather may enhance the possibility of crop injury .
Colorado, Kansas, New Mexico, Oklahoma, and 
Texas. For suppression of perennial weeds (such as field 
bindweed), up to 6 .4 fl ozs/A of Everdant may be applied 
on fall-seeded wheat after wheat exceeds the 3-leaf stage . 
Application may be made in the fall following a frost but 
before a killing freeze . Everdant at 6 .4 fl ozs/A may be 
sequentially applied with MCPA after wheat begins to tiller . 
Periods of extended stress such as cold and wet weather 
may enhance the possibility of crop injury . For fall applica-
tions only, DO NOT apply Everdant if the potential for crop 
injury is unacceptable .
Preharvest Applications
To control broadleaf weeds that interfere with harvest, 
 Everdant may be applied before harvest when barley or 
wheat is in the hard dough stage and the green color is 
gone from the nodes (joints) of the stem . Best results will 
be obtained if the application can be made when weeds 
are actively growing but before weeds canopy .
 Everdant applications may be made to fall-planted and 
spring-planted barley and wheat at 6 .4 fl ozs/A as a 
 broadcast application or spot treatment . A preharvest 
interval (PHI) of 7 days is required before crop harvest .
Use with Other Herbicides
Broad-spectrum control of broadleaf and grass weeds 
requires another herbicide . Everdant may be applied 
sequentially with one or more of, but not limited to, the fol-
lowing herbicide products:
• Beyond® herbicide (for Clearfield ® wheat and 
 Clearfield ® Plus wheat only)
• Clearmax® herbicide (for Clearfield wheat and 
Clearfield Plus wheat only)
• Sharpen® powered by Kixor® herbicide
• Zidua® herbicide
• 2,4-D amine
• MCPA
• sulfonylurea-based herbicide (e .g . Ally® herbicide, 
Express® herbicide, Finesse® herbicide)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .

21
Small Grain Restrictions 
• Maximum use rate per application 
- 3 .2 fl ozs/A: Oats and triticale 
- 6 .4 fl ozs/A: Spring-seeded barley, fall-seeded barley, 
wheat
• Maximum seasonal use rate 
- 3 .2 fl ozs/A: Oats and triticale 
- 8 .8 fl ozs/A: Spring-seeded barley 
- 9 .6 fl ozs/A: Fall-seeded barley 
- 12 .8 fl ozs/A: Wheat
• DO NOT apply EverdantTM herbicide preharvest to 
oats or triticale .
• DO NOT use an oil concentrate adjuvant for postemer-
gence in-crop application .
• DO NOT use preharvest-treated barley or wheat for 
seed unless a germination test with an acceptable result 
of 95% germination or more is performed on the seed .
• DO NOT graze small grain (barley, oats, triticale, wheat) 
within 7 days after treatment .
• DO NOT harvest for hay within 37 days after treatment .
• Barley and wheat may be harvested 7 days or more after 
a preharvest application .
• DO NOT make preharvest application in California .
Sorghum
 Everdant may be used early preplant, postemergence, 
and preharvest in sorghum to control many annual broad -
leaf weeds and to reduce competition from established 
perennial broadleaf weeds .
Application Rates and Timings
Preplant Applications
(at least 14 days before planting)
A preplant application of Everdant up to 6 .4 fl ozs/A may 
be applied at least 14 days before sorghum planting .
Postemergence Applications
Up to 6 .4 fl ozs/A of Everdant plus specified adjuvants 
(refer to Tank Mixing Information section for details) may 
be applied after sorghum is in the spike stage (all sorghum 
emerged) but before sorghum is 15-inches tall . For best 
performance, apply Everdant when sorghum crop is in 
the 3-leaf to 5-leaf stage and weeds are small (less than 
3-inches tall) . Use drop nozzles if sorghum is taller than 
8 inches . Keep spray off sorghum leaves and out of the 
whorl to reduce the like lihood of crop injury and to improve 
spray coverage of weed foliage . 
Applying Everdant to sorghum during periods of rapid 
growth may result in temporary leaning of plants or rolling 
of leaves . These effects are usually outgrown within 10 to 
14 days .
Preharvest Applications
Oklahoma and Texas ONLY
Up to 6 .4 fl ozs/A of Everdant may be applied for weed 
suppression any time after sorghum has reached the 
 soft-dough stage . An agriculturally approved surfactant 
may be used to improve performance; see Tank Mixing 
 Information section for details . Delay harvest until 
30 days after a preharvest treatment . 
Split Applications
 Everdant may be applied in split applications: preplant 
followed by postemergence or preharvest; or postemer-
gence followed by preharvest . DO NOT apply more than 
6 .4 fl ozs/A of Everdant per application, or a maximum 
cumulative total of 12 .8 fl ozs/A of Everdant per year .
Use with Other Herbicides
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Basagran® 5L herbicide
• Facet® L herbicide
• Outlook® herbicide - (Preplant only)
• Sharpen
• Verdict® powered by Kixor® herbicide
• atrazine
• glyphosate (e .g . Roundup® herbicide)
It is the pesticide user’s responsibility to ensure that all 
products are registered for the intended use . Read and 
follow the applicable restrictions and limitations and direc -
tions for use on all product labels involved in tank mixing . 
Users must follow the most restrictive directions for use 
and precautionary statements of each product in the tank 
mixture .
Sorghum Restrictions 
• DO NOT graze or feed treated sorghum forage or silage 
before mature grain stage . If sorghum is grown for pas-
ture or hay, refer to Pasture, Hay, Rangeland, and 
Farmstead (noncropland) section for specific grazing 
and feeding restrictions . 
• DO NOT apply Everdant to sorghum grown for seed 
 production .
• DO NOT apply more than 6 .4 fl ozs/A of Everdant 
(0 .25 lb dicamba ae/A) per application .
• DO NOT apply more than a maximum cumulative total of 
12 .8 fl ozs/A of Everdant (0 .5 lb dicamba ae/A) per 
 season .
• Oklahoma and Texas only - Delay harvest until 
30 days after a preharvest treatment .
Soybean
 Everdant may be used preplant or preharvest in soybean 
to control many annual broadleaf weeds and to reduce 
competition from established biennial and perennial broad -
leaf weeds .

22
Application Rates and Timings
Preplant Applications
(at least 14 days before planting)
Apply EverdantTM herbicide as a broadcast spray at 
3 .2 to 12 .8 fl ozs/A plus specified adjuvants; refer to Tank 
 Mixing Information section for details .
 Preplant Intervals. Following application of Everdant 
and a minimum accumulation of 1 inch of rainfall or over-
head irrigation, preplant waiting intervals are required 
before planting soybeans or crop injury may occur:
• 14 days for 3 .2 to 6 .4 fl ozs/A
• 28 days for 6 .5 to 12 .8 fl ozs/A
Preharvest Applications
Apply Everdant as a broadcast spray or spot spray at 
6 .4 to 12 .8 fl ozs/A plus specified adjuvants; refer to Tank 
Mixing Information section for details . Applications 
should be made to emerged and actively growing weeds 
after soybean pods have reached mature brown color and 
at least 75% leaf drop has occurred . 
Treatments may not kill weeds that later develop from seed 
or underground parts, such as rhizomes or bulblets, after 
the effective residual period for Everdant . For seedling 
control, a follow-up program or other cultural practices 
should be instituted .
Use with Other Herbicides 
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Outlook® herbicide
• Prowl® H2O herbicide
• Pursuit® herbicide
• Raptor® herbicide
• Sharpen® powered by Kixor® herbicide
• Verdict® powered by Kixor® herbicide
• Zidua® herbicide
• Zidua® PRO powered by Kixor® herbicide
• glyphosate (e .g . Roundup® herbicide)
It is the pesticide user’s responsibility to ensure that all prod-
ucts are registered for the intended use . Read and follow 
the applicable restrictions and limitations and directions for 
use on all product labels involved in tank mixing . Users must 
follow the most restrictive directions for use and precaution-
ary statements of each product in the tank mixture .
Soybean Restrictions 
• DO NOT apply to dicamba tolerant (DT) soybeans .
• DO NOT apply more than 12 .8 fl ozs/A of Everdant 
(0 .5 lb dicamba ae/A) in a spring application before soy -
bean planting .
• DO NOT make Everdant preplant application to soy-
beans in geographic areas with average annual rainfall 
less than 25 inches . 
• DO NOT apply more than 25 .6 fl ozs/A of Everdant (1 lb 
dicamba ae/A) per year (single growing season) .
• DO NOT use preharvest-treated soybean for seed 
unless a germination test with an acceptable result of 
95% germination or better is performed on the seed . 
• DO NOT harvest soybeans until 7 days after a prehar-
vest application .
• DO NOT feed soybean fodder or hay following prehar-
vest application of Everdant .
• DO NOT make preharvest applications in California .
Sugarcane
 Everdant may be used any time after weed emergence 
but before the close-in stage of sugarcane to control many 
annual and perennial broadleaf weeds; see Table 1 for 
weeds controlled or suppressed .
Apply 6 .4 to 12 .8 fl ozs/A of Everdant for control of annual 
weeds and 12 .8 fl ozs/A for control or suppression of bien-
nial and perennial weeds . Use the higher rate of the 
specified rate range when treating dense vegetative 
growth . Repeat treatment may be made as needed; how-
ever, DO NOT apply more than the annual maximum 
cumulative total of 51 .2 fl ozs/A of Everdant (2 lbs 
dicamba ae/A) .
When possible, direct the spray beneath the sugarcane 
canopy to minimize the likelihood of crop injury . Using 
directed sprays will also help maximize the spray coverage 
of weed foliage .
Use with Other Herbicides 
 Everdant may be applied sequentially with one or more 
of, but not limited to, the following herbicide products:
• Prowl® H2O herbicide
• atrazine
It is the pesticide user’s responsibility to ensure that all prod-
ucts are registered for the intended use . Read and follow 
the applicable restrictions and limitations and directions for 
use on all product labels involved in tank mixing . Users must 
follow the most restrictive directions for use and precaution-
ary statements of each product in the tank mixture .
Sugarcane Restrictions 
• DO NOT apply more than 12 .8 fl ozs/A of Everdant 
(0 .5 lb dicamba ae/A) in a single application .
• DO NOT apply more than a maximum cumulative total of 
51 .2 fl ozs/A of Everdant (2 lbs dicamba ae/A) per grow-
ing season .
• DO NOT harvest sugarcane until 87 days after application .

23
Farmstead Turf (noncropland) 
and Sod Farms
 EverdantTM herbicide may be used in farmstead turf 
(noncropland) and sod farms to control or suppress 
growth of many annual, biennial, and some perennial 
broadleaf weeds; see Table 1 for weeds controlled or sup-
pressed . Everdant will also suppress woody brush and 
vine species; refer to Table 2 for application rates based 
on targeted weed or woody brush and vine species and 
growth stage . Some weed species will require tank mixes 
for optimum control . 
Repeat treatment may be made as needed; however, 
DO NOT apply more than 25 .6 fl ozs/A of Everdant 
(1 lb dicamba ae/A) per growing season . 
Apply 30 to 200 gallons of diluted spray per acre (3 to 
17 quarts of water per 1000 sq ft), depending on density 
or height of weeds treated and on type of equipment used .
To avoid injury to newly seeded grasses, delay application 
of Everdant until after the second mowing . Established 
grass crops growing under stress can exhibit various injury 
symptoms that may be more pronounced if herbicides are 
applied . Bentgrass, buffalograss, carpetgrass, and 
St . Augustinegrass may show a response . 
Use with Other Herbicides 
 Everdant at 3 .2 to 12 .8 fl ozs/A may be applied sequen-
tially with one or more of, but not limited to, the following 
herbicide products:
• Drive® XLR8 herbicide
• Pendulum® AquaCap herbicide
• Tower® herbicide
• 2,4-D
• MCPA
• MCPP
It is the pesticide user’s responsibility to ensure that all prod-
ucts are registered for the intended use . Read and follow 
the applicable restrictions and limitations and directions for 
use on all product labels involved in tank mixing . Users must 
follow the most restrictive directions for use and precaution-
ary statements of each product in the tank mixture .
Farmstead Turf and Sod Farm Restrictions 
• DO NOT use on residential sites . 
• DO NOT apply more than 25 .6 fl ozs/A of Everdant 
(1 lb dicamba ae/A) per growing season .
• Areas where Roots of Sensitive Plants Extend
- DO NOT apply more than 3 .2 fl ozs/A of Everdant 
(0 .125 lb dicamba ae/A) on coarse-texture soils (sand, 
loamy sand, or sandy loam) .
- DO NOT apply more than 6 .4 fl ozs/A of Everdant on 
fine-texture soils .
- DO NOT make repeat applications in these areas for 
30 days and until previous applications of Everdant 
have been activated in the soil by rainfall or irrigation .

24
Conditions of Sale and Warranty
The Directions For Use of this product reflect the 
 opinion of experts based on field use and tests . The 
 directions are believed to be reliable and must be 
followed carefully . However, it is impossible to eliminate 
all risks inherently associated with the use of this 
product . Crop injury, ineffectiveness or other unintended 
consequences may result because of such factors as 
weather conditions, presence of other materials, or use 
of the product in a manner inconsistent with its labeling, 
all of which are beyond the control of BASF 
CORPORATION (“BASF”) or the Seller . To the extent 
consistent with applicable law, all such risks shall be 
assumed by the Buyer .
BASF warrants that this product conforms to the 
chemical description on the label and is reasonably fit for 
the purposes referred to in the Directions For Use , 
subject to the inherent risks, referred to above .
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF MAKES NO OTHER EXPRESS OR 
IMPLIED WARRANTY OF FITNESS OR 
 MERCHANTABILITY OR ANY OTHER EXPRESS OR 
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S 
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, 
TORT, NEGLIGENCE, STRICT LIABILITY, OR 
 OTHERWISE, SHALL BE LIMITED TO REPAYMENT 
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE 
LAW, BASF AND THE SELLER DISCLAIM ANY 
 LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, 
SPECIAL OR INDIRECT DAMAGES RESULTING 
FROM THE USE OR HANDLING OF THIS 
PRODUCT.
BASF and the Seller offer this product, and the Buyer 
and User accept it, subject to the foregoing Conditions 
of Sale and Warranty which may be varied only by 
 agreement in writing signed by a duly authorized 
representative of BASF . 1108
Referenced Pesticides (Name, Reg . No ., Active)
Ally® herbicide, 279-9575, Metsulfuron Methyl
Armezon® herbicide, 7969-262, Topramezone
Armezon® PRO herbicide, 7969-372, Topramezone, 
Dimethenamid
Basagran® 5L herbicide, 7969-112, Bentazon
Beyond® herbicide, 7969-441, Imazamox
Clearmax® herbicide, 7969-238, Imazamox, MCPA
Distinct ® herbicide, 7969-150, Dicamba, Diflufenzopyr
Drive® XLR8 herbicide, 7969-272, Quinclorac
EverdantTM herbicide, 7969-479, Dicamba
Express® herbicide, 279-9578, Tribenuron Methyl
Facet® L herbicide, 7969-315, Quinclorac
Finesse® herbicide, 279-9576, Chlorsulfuron, 
Metsulfuron Mehtyl
Gramoxone® SL herbicide, 100-1652, Paraquat
© 2023 BASF Corporation
All rights reserved .
007969-00479 .20230907 .NVA 2023-04-0647-0139
Supersedes: NVA 2020-04-647-0162
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
Lorsban® insecticide, 62719-34, Chlorpyrifos
Outlook® herbicide, 7969-156, Dimethenamid
Pendulum® AquaCap (add to page 23?) herbicide , 
241-416, Pendimethalin
Prowl® H2O herbicide, 241-418, Pendimethalin
Pursuit® herbicide, 241-310, Imazethapyr
Raptor® herbicide, 241-379, Imazamox
Roundup® herbicide, 524-549, Glyphosate
Select Max® herbicide, 59639-132, Clethodim
Sharpen® powered by Kixor® herbicide, 7969-278, 
Saflufenacil
Tower® herbicide, 7969-239, Dimethenamid
Varisto® herbicide, 241-447 , Bentazon/Imazamox
Verdict® powered by Kixor® herbicide, 7969-279, 
Dimethenamid/Saflufenacil
Zidua® herbicide, 7969-338, Pyroxasulfone
Zidua® PRO powered by Kixor® herbicide, 7969-365, 
Saflufenacil/Pyroxasulfone
Armezon, Basagran, Beyond, Clearfield , Clearmax, 
Distinct, Drive, Facet, Kixor, Outlook, Pendulum, 
Prowl, Pursuit, Raptor, Sharpen, Tower, Varisto, 
Verdict, and Zidua are registered trademarks of BASF.
Everdant is a trademark of BASF.
Ally, Express, and Finesse are registered trademarks of 
DuPont Crop Protection.
Gramoxone is a registered trademark of a Syngenta 
Group Company.
Lorsban is a registered trademark of Dow AgroSciences 
LLC.
Roundup is a registered trademark of Monsanto 
Technology LLC.
Select Max is a registered trademark of Valent U.S.A. 
Corporation.