crop-chem-docs/corpus/epa_ppls/7969-88.md

# POAST PLUS HERBICIDE

- EPA Reg No: **7969-88**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Caution
- Active ingredients: Sethoxydim (13%)
- Label accepted: 2014-02-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00088-20140211.pdf

---
tjss
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
Washington, D.C. 20460
OFFICE OF
CHEMICAL SAFETY AND
POLLUTION PREVENTION
FEB ! 1 2014
Amy Dugger-Ronyak
BASF Corporation
P.O. Box 13528
Research Triangle Park, NC 27709-3528
Subject: Label Amendment (change primary brand name, remove Segment herbicide
sublabel, reformat sublabels, add use on wildlife food plots)
Poast Plus Herbicide
EPA Reg. No. 7969-88
Application Dated November 18, 2013
Dear Ms. Dugger-Ronyak:
The labeling referred to above, submitted in connection with registration under the Federal
Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable.
The primary brand name for this product has been changed from "Segment Herbicide" to
"Poast Plus Herbicide".
A stamped copy of the label is enclosed for your records. This label supersedes all previously
accepted labels, including supplemental labels. You must submit one (1) copy of the final
printed label before you release the product for shipment. Products released for shipment after
eighteen (18) months from the date of this letter must bear the new revised label. If these
conditions are not complied with, the registration will be subject to cancellation in accordance
with FIFRA §6(e). Your release for shipment of the product constitutes acceptance of these
conditions.
If you have any questions, please contact Mindy Ondish at (703)605-0723 or at
ondish.mindy@epa.gov.
Kable Bo Davis
Product Manager 25
Herbicide Branch
Registration Division (7505P)
Office of Pesticide Programs

BASFThe Chemical Company
Poast Plus® herbicide
{EPA Reg. No. 7969-88)
Table of Contents
Section 1: Poast Plus® herbicide Pages 2 to 26
Section 2: Poast Plus® herbicide Pages 27 to 34
[alternate brand name: Rezult® G herbicide]
ACCEPTEDFBB 1 1 2014
Under the Federal Insecticide,
Fungicide, and Rodenticide Act
as amended, for the pesticide
registered under
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
007969-00088.20131 OSOd.NVA 2013-04-026-0010
[Page 1 of 34]

BASF Group
The Chemical Company
Herbicide
Poast Plusherbicide
For broad-spectrum, postemergence selective control of annual
and perennial grass weeds in select crops and other use sites
Active Ingredient:
sethoxydim: 2-[1 -(ethoxyimino)butyl]-5-[2-(ethylthio)propyl]-
3-hydroxy-2-cyclohexen-1 -one* 13.0%
Other Ingredients: 87.0%
Total: 100.0%
"Equivalent to 1 pound of sethoxydim per gallon formulated as an emulsifiable concentrate
Contains petroleum distillate
EPA Reg. No. 7969-88
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
EPA Est. No.
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, find someone to explain it to you in detail.)
See inside for complete First Aid, Precautionary Statements, Directions For Use,
Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation
26 Davis Drive, Research Triangle Park, NC 27709
[Page 2 of 34]

FIRST AID
If swallowed
If on skin or clothing
If in eyes
If inhaled
• Immediately call a poison control center or doctor.
• DO NOT induce vomiting unless told to by a poison control center or doctor.
• DO NOT give any liquid to the person.
• DO NOT give anything by mouth to an unconscious person.
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 1 5 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
• Hold eyes open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes.
• Call a poison control center or doctor for treatment advice.
• Move person to fresh air.
• If person is not breathing, call 91 1 or an ambulance; then give artificial respiration,
preferably by mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment. In
case of medical emergency involving this product, call BASF Corporation at 1 -800-832-HELP (4357) or dial 911.
NOTE TO PHYSICIAN
May pose an aspiration pneumonia hazard. Contains petroleum distillate.
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Causes moderate eye injury. Harmful if swal-
lowed or absorbed through the skin. Avoid contact with
skin, eyes, or clothing.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Chemical-resistant gloves, such as barrier laminate, nitrile
rubber > 14 mils, neoprene rubber > 14 mils, or viton
> 14 mils
. • Shoes plus socks
Follow manufacturer's instructions for cleaning and main-
taining PPE. If no such instructions for washables exist, use
detergent and hot water. Keep and wash PPE separately
from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE
requirements may be reduced or modified as specified in
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum,
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean
clothing. .
Environmental Hazards
For terrestrial uses, DO NOT apply directly to water, or to
areas where surface water is present, or to intertidal areas
below the mean high water mark. DO NOT contaminate
water when disposing of equipment washwater or rinsate.
This product is toxic to aquatic organisms.
Endangered Species Concerns
NOTE: The use of any pesticide in a manner that may kill
or otherwise harm an endangered or threatened species or
adversely modify their habitat is a violation of federal law.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. This label must be in
possession of the user at the time of herbicide application.
DO NOT apply this product in a way that will contact work-
ers or other persons, either directly or through drift. Only
protected handlers may be in the area during application.
2 [Page 3 of 34]

For requirements specific to your state or tribe, consult the
agency responsible for pesticide regulation.
Observe all precautions and limitations in this label and the
labels of products used in combination with Poast Plus®
herbicide. Use of Poast Plus not consistent with this
label can result in injury to crops, animals, or persons.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and
with the Worker Protection Standard, 40 CFR Part 170.
This standard contains requirements for the protection of
agricultural workers on farms, forests, nurseries, and
greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination, notifi-
cation, and emergency assistance. It also contains
specific instructions and exceptions pertaining to the .
statements on this label about personal protective equip-
ment (PPE) and restricted-entry interval. The requirements
in this box only apply to uses of this product that are cov-
ered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 12 hours.
PPE required for early entry to treated areas that is permit-
ted under the Worker Protection Standard and that
involves contact with anything that has been treated, such
as plants, soil, or water is:
• Coveralls
• Chemical-resistant gloves, such as or made of any
waterproof material
• Shoes plus socks
NONAGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product
that are NOT within the scope of the Worker Protection
Standard (WPS) for agricultural pesticides (40 CFR
Part 170). The WPS applies when this product is used to
produce agricultural plants on farms, forests, nurseries,
or greenhouses.
DO NOT enter or allow others to enter treated areas until
sprays have dried.
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or
disposal.
Pesticide Storage
DO NOT allow this product to freeze. DO NOT store
below 32° F or above 100° F. Store in original container
only, in a dry place away from heat or open flame, and
separate from feed or foodstuffs.
Pesticide Disposal
To avoid pesticide waste, use all material in this container
by application according to label directions. If pesticide
waste cannot be avoided, offer remaining product to a
waste disposal facility or pesticide disposal program (often
such programs are run by state or local governments or
by industry).
Container Handling
Nonrefillable Container. DO NOT reuse or refill this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landfill, or by inciner-
ation, or by other procedures approved by state and local
authorities.
Triple rinse containers small enough to shake
(capacity < 5 gallons) as follows: Empty the remaining
contents into application equipment or a mix tank and
drain for 10 seconds after the flow begins to drip. Fill the
container 1/4 full with water and recap. Shake for 10 sec-
onds. Pour rinsate into application equipment or a mix
tank, or store rinsate for later use or disposal. Drain for
10 seconds after the flow begins to drip. Repeat this pro-
cedure two more times.
Triple rinse containers too large to shake
(capacity > 5 gallons) as follows: Empty the remaining
contents into application equipment or a mix tank. Fill the
container 1/4 full with water. Replace and tighten clo-
sures. Tip container on its side and roll it back and forth,
ensuring at least one complete revolution, for 30 seconds.
Stand the container on its end and tip it back and forth
several times. Turn the container over onto its other end
and tip it back and forth several times. Empty the rinsate
into application equipment or a mix tank, or store rinsate
for later use or disposal. Repeat this procedure two more
times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and continue
to drain for 10 seconds after the flow begins to drip. Hold
container upside down over application equipment or mix
tank, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle in the side of the container and
rinse at about 40 PSI for at least 30 seconds. Drain for
10 seconds after the flow begins to drip.
(continued)
3 [Page 4 of 34]

STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Refillable Container. Refill this container with pesticide
only. DO NOT reuse this container for any other purpose.
Triple rinsing the container before final disposal is the
responsibility of the person disposing of the container.
Cleaning before refilling is the responsibility of the refiller.
Triple rinse as follows: To clean the container before
final disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the
container about 10% full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or
pump rinsate into application equipment or rinsate collec-
tion system. Repeat this rinsing procedure two more
times.
When this container is empty, replace the cap and seal all
openings that have been opened during use; return the
container to the point of purchase or to a designated
location. This container must only be refilled with a pesti-
cide product. Prior to refilling, inspect carefully for damage
such as cracks, punctures, abrasions, worn-out threads
and closure devices. Check for leaks after refilling and
before transport. DO NOT transport if this container is
damaged or leaking. If the container is damaged, or leak-
ing, or obsolete and not returned to the point of purchase
or to a designated location, triple rinse emptied container
and offer for recycling, if available, or dispose of container
in compliance with state and local regulations.
Restrictions and Limitations
In Case of Emergency
In case of a spill of this product, call:
• CHEMTREC
• BASF Corporation
1-800-424-9300
1-800-832-HELP(4357)
Steps to take if this material is released into the
environment or spilled:
• Wear Personal Protective Equipment (PPE) and avoid
exposure when managing a spill. (See Precautionary
Statements section of this label for required PPE.)
• Dike and contain the spill with inert, absorbent material
(e.g., sand, earth) and transfer liquid and solid diking
material to separate containers for disposal. Small-scale
spills of Poast Plus® herbicide (that can be cleaned up
with a typical spill kit) may be applied to labeled sites.
• Remove contaminated clothing, and wash affected skin
areas with soap and water. Wash clothing before reuse.
• Keep spill out of all sewers and open bodies of water.
• Maximum seasonal application rate - Refer to the
Use-specific Information section of the label.
• Preharvest interval (PHI) - Refer to the Use-specific
Information section of the label.
• DO NOT apply preplant or preemergence before planting
grass crops except field corn. Refer to Use-specific
Information.
• DO NOT plant harvestable crops for 30 days after appli-
cation unless sethoxydim is labeled for use on that crop.
• Avoid all direct or indirect contact with any desired grass
crop (e.g., corn, rice, small grains, sorghum, and orna-
mental grasses and turfgrass).
• Poast Plus does not control sedges or broadleaf weeds.
• Stress - DO NOT apply to grass weeds or crops under
stress because of lack of moisture, hail damage, flooding,
herbicide injury, mechanical injury, or widely fluctuating
temperatures. Unsatisfactory control may result. In irrigat-
ed areas, it may be necessary to irrigate before
application to ensure active grass weed growth.
• DO NOT apply to crops that show injury (leaf phytotoxici-
ty or plant stunting) produced by any other prior herbicide
applications because this injury may be enhanced or pro-
longed with new or additional herbicide application.
• A minimum of 14 days is required between sequential
applications of Poast Plus.
• DO NOT use selective application equipment such as
recirculating sprayers, wiper applicators, or shielded
applicators.
• DO NOT apply through any type of irrigation equipment.
• Rainfast period - Poast Plus is rainfast 1 hour after
application.
4 [Page 5 of 34]

?*r
Product Information
Poast Plus® herbicide is a broad-spectrum,
postemergence herbicide for selective control of annual
and perennial grass weeds listed in Table 1. Refer to
Table 2 for crops and other use sites to which Poast Plus
can be applied.
Table 1. Grass Weeds Controlled
> ; Annual Grass Weeds
Barley, interseeded
cover crops' and volunteer
Barnyardgrass
Corn, volunteer
Crabgrass, large
Crabgrass, smooth
Cupgrass, southwestern
Cupgrass, woolly
Fescue, tall (seedling)
Foxtail, giant
Foxtail, green
Foxtail, yellow
Goosegrass
Itchgrass
Johnsongrass (seedling)
Junglerice
Lovegrass
Millet, wild proso
Oats, interseeded
cover crops' i2 and volunteer
Oats, tame
Oats, wild
Orchardgrass (seedling)
Panicum, browntop
Panicum, fall
Panicum, Texas
Red rice
Rye, interseeded
cover crops' and volunteer
Ryegrass, annual
Sandbur, field
Shattercane/Wildcane
Signalgrass, broadleaf
Sprangletop, red
Stinkgrass
Wheat, interseeded
cover crops' and volunteer
Witchgrass
4;* - ; Perennial Grass Weeds
Bermudagrass
Guineagrass
Johnsongrass (no-till)
Johnsongrass (rhizome)
Muhly, wirestem
Quackgrass
Ryegrass, perennial
Torpedograss
1 As interseeded cover crops grown with non-grass or
broadleaf crops listed in the Use-specific Information
section of this label. Apply to cereals before tillering and
at a height of 3 to 4 inches. DO NOT allow cereals to
exceed this height.
2 As interseeded oats in alfalfa, birdsfoot trefoil, clover, and
sainfoin. To be most effective, make application before
the interseeded oats reach the boot stage.
Table 2. Crops and Other Use Sites
Alfalfa, Birdsfoot trefoil, Sainfoin
(dry and undried)
Apricot (bearing)
Artichoke, globe
Asparagus
Avocado (nonbearing)
Beans, dry and succulent
Beet, garden/table
Beet, sugar
Blueberry
Brassica Vegetables
Bulb Vegetables
Caneberries
Canola, Crambe, Rapeseed
Carrot
Cherry, sweet and tart
(bearing and nonbearing)
Citrus
Clover
Conservation Reserve Land
(CRP)
Corn, field
including Poast® Protected
hybrids
Corn, sweet
(Poast Protected hybrids
ONLY)
Cotton
Cranberry
Crops Grown for Seed
Cucurbit Vegetables
Date (nonbearing)
Fig (nonbearing)
Fine Fescue Grown for
Turfgrass Seed
Flax
Fruiting Vegetables
(excluding tomato)
Grape
Head-type and Petiole-type
Vegetables
Horseradish
Leafy Vegetables
Lentil
Lingonberry, Salal, Juneberry
Mint
Nectarine (bearing)
Nonagricultural Land
Olive (nonbearing)
Orchard Floor Middles
(growth management)
Peach (bearing)
Peanut
Peas, dry and succulent
Pistachio
Plum (nonbearing)
Pome Fruits
Pomegranate (nonbearing)
Potato, field
Potato, sweet
Prune (nonbearing)
Safflower
Soybean
Strawberry
Sunflower
Tall Fescue Growth
Suppression
(in Nonagricultural Land)
Tobacco
Tomato
Tree Nuts
Tuberous and Corm
Vegetables
Wildlife Food Plots
Mode of Action
Poast Plus affects lipid synthesis by inhibition of Acetyl
CoA Carboxylase (ACCase) in plants. It belongs to herbi-
cide mode-of-action Group 1. Lipids are an important
5 [Page 6 of 34]

component in cell division and plant growth. If plant cells
cannot divide, the plant will die.
Poast Plus® herbicide rapidly enters the target grass
weed through its foliage and moves throughout the plant.
Effects range from slowing or stopping growth (typically
within 2 days) to foliage reddening and leaf tip burn. Foliage
burnback may occur later. Symptoms are typically
observed within 3 weeks of application of Poast Plus,
depending on environmental conditions.
Crop Tolerance
Ail crops listed on this label are tolerant to Poast Plus at all
stages of growth.
Herbicide Resistance
Repeated use of Poast Plus or other Group 1 herbicides
may lead to the selection of naturally occurring grass weed
biotypes with resistance to Group 1 herbicides. If poor
herbicide performance cannot be attributed to adverse
weather conditions or improper application methods, a
resistant biotype may be present. Consult your local BASF
Corporation representative or Cooperative Extension agent
for assistance.
Cultivation
DO NOT cultivate within 5 days before or 7 days after
applying Poast Plus. Cultivating 7 days or more after
application may help provide season-long control.
Spray Drift Management
• Avoiding spray drift at the application site is the responsi-
bility of the applicator.
• DO NOT spray when conditions favor drift beyond the
area intended for application.
• Apply only when the wind speed is 10 mph or less.
NOTE: For all nonaerial applications, wind speed must
be measured at the application site on the upwind side
immediately before application.
• Conditions that may contribute to drift include spray
droplet size, spray nozzle/pressure combinations, wind
speed and direction, temperature and humidity, tempera-
ture inversions, etc.
• All aerial and ground application equipment must be
properly maintained and calibrated using appropriate
carriers.
• Contact your Cooperative Extension agent for spray drift
prevention guidelines specific to your area.
Spray Drift Reduction Advisory Information
Information on Droplet Size
The best drift management strategy is to apply the largest
droplet size that provides sufficient coverage and control
and is consistent with acceptable efficacy. Applying larger
droplets reduces drift potential but will not prevent drift if
applications are made improperly or under unfavorable
environmental conditions (see Wind; Temperature and
Humidity; and Temperature Inversions sections of this
label).
6 [Page 7 of 34]
Controlling Droplet Size
• Volume - Use high flow rate nozzles to apply the highest
practical spray volume. Nozzles with higher rated flows
produce larger droplets. Use a minimum of 5 gallons of
water per acre. If grass weed foliage or crop canopy is
dense, increase water volume to a least 10 gallons of
water per acre.
• Pressure - Use the lower spray pressures recommended
for the nozzle and DO NOT exceed the nozzle manufac-
turer's recommended pressures. Higher pressure reduces
droplet size but does not improve canopy penetration.
When higher flow rates are needed, use higher flow rate
nozzles instead of increasing pressure.
• Number of Nozzles - Use the minimum number of noz-
zles that provide uniform coverage.
• Nozzle Orientation - Orienting nozzles so spray is
released backward parallel to the airstream produces
larger droplets than other orientations. Significant deflec-
tion from horizontal will reduce droplet size and increase
drift potential.
• Nozzle Type - Use a nozzle type designed for the
intended application. With most nozzle types, narrower
spray angles produce larger droplets. Consider using
low-drift nozzles. Solid-stream or straight-stream nozzles
oriented straight back produce the largest droplets and
lowest drift. Apply only as a medium or coarse spray
(ASAE standard 572) or a volume mean diameter of
300 microns or greater for spinning atomizer nozzles.
• Boom Length - For some use patterns, reducing the
effective boom length to less than 3/4 of the wingspan or
rotor length may further reduce drift without reducing
swath width.
• Application Height - Applications should not be made
at a height greater than 10 feet above the top of the
largest plants, unless a greater height is required for air-
craft safety. Making applications at the lowest height
possible reduces exposure of droplets to evaporation and
wind.
Swath Adjustment
When applications are made with a crosswind, the swath
will be displaced downwind. Therefore, on the upwind and
downwind edges of the field, the applicator must compen-
sate for this displacement by adjusting the path of the
aircraft upwind. Swath adjustment distance should
increase with increasing drift potential (e.g., higher wind,
smaller droplets).
Wind
Drift potential is lowest between wind speeds of 2 to
10 mph. However, many factors, including droplet size and
equipment type, determine drift potential at any given
speed. Application must be avoided if wind speed is below
2 mph because of variable wind direction and high inver-
sion potential.
NOTE: Local terrain can influence wind patterns. Every
applicator should be familiar with local wind patterns and
how they affect spray drift.

Temperature and Humidity
Low humidity and high temperatures increase the evapora-
tion of spray droplets, increasing the likelihood of spray
drift. If applications are made in low humidity, set up the
application equipment to produce larger droplets to com-
pensate for evaporation; however, droplets should remain
in the medium droplet size category. Droplet evaporation is
most severe when conditions are both hot and dry.
Temperature Inversions
Applications must not occur during a temperature inversion
because drift potential is high. If inversion conditions are
suspected, consult with local weather services before mak-
ing an application. Temperature inversions restrict vertical
air mixing, which causes small suspended droplets to
remain in a concentrated cloud. This cloud can move in
unpredictable directions because of the light, variable
winds common during inversions. Temperature inversions
are characterized by increasing temperatures with altitude
and are common on nights with limited cloud cover and
light-to-no wind. They begin to form as the sun sets and
often continue into the morning. Their presence can be
indicated by ground fog; however, if fog is not present,
inversions can also be identified by the movement of
smoke from a ground source or an aircraft smoke genera-
tor. Smoke that layers and moves laterally in a
concentrated cloud (under low wind conditions) indicates
an inversion, while smoke that moves upward and rapidly
dissipates indicates good vertical air mixing.
Sensitive Areas
The pesticide must only be applied when the potential for
drift to adjacent sensitive areas (e.g., residential areas, bod-
ies of water, known habitat for threatened or endangered
species, or nontarget crops) is minimal and when wind is
blowing away from sensitive areas.
Tank Mixing Information
Poast Plus® herbicide is a broad-spectrum,
postemergence herbicide for selective control of annual
and perennial grass weeds. For broadleaf weed control,
Poast Plus should be used in combination with, or in
sequence with, effective broadleaf herbicides approved for
use. Read and follow the applicable restrictions and limita-
tions and directions for use on all product labels in a tank
mix. Always follow the most restrictive label use directions.
Refer to the Use-specific Information section of this
label for tank mixing restrictions.
Physical incompatibility, reduced grass weed control, or
crop injury may result from mixing Poast Plus with other
pesticides (fungicides, herbicides, insecticides, or miti-
cides), additives, or fertilizers not recommended on this
label.
Before mixing components, always perform a compatibility
test in a quart-size jar. Add components in the same order
as listed in the Mixing Order section of this label.
Compatibility Test for Tank Mix Components
1. For a 20 gallons per acre spray volume, start with
3.3 cups (800 mL) of water from the intended source at
the source temperature. For other spray volumes, adjust
rates accordingly. For each dry product, add 2 tea-
spoons per pound of product per acre. For each liquid
product, add 1 teaspoon per pint of product per acre.
2. Always cap the jar and invert 10 times between compo-
nent additions.
3. When the components have all been added to the jar, let
the solution stand for 15 minutes.
4. Evaluate the solution for uniformity and stability. The
spray solution should not have free oil on the surface;
fine particles that precipitate to the bottom; or a thick
(clabbered) texture. DO NOT use any spray solution that
could clog spray nozzles.
Additives
To achieve consistent postemergence grass weed control
with Poast Plus, always use a crop oil concentrate (COG)
or methylated/modified seed oil (MSO) as directed in
Table 3. In addition, ammonium sulfate (AMS) or urea
ammonium nitrate (UAN) will enhance activity on certain
grass weed species in certain crops (refer to the Use-
specific Information section).
NOTE: Using Poast Plus with adjuvants at temperature
above 90° F (or anytime the temperature exceeds 100° F
regardless of the humidity) and relative humidity at or above
60% may result in injury to many vegetable crops.
Consult your.BASF Corporation representative or
Cooperative Extension agent for more information on the
use of additives.
Table 3. Additive Rate per Acre - Aerial and Ground
Applications
Additive
AMS
COC
MSO
UAN
Rate/Acre
2.5 pounds
2.0 pints
1 .5 pints
4.0 to 8.0 pints
Crop Oil Concentrate or
Methylated Seed Oil
COG or MSO must contain either a petroleum-oil or
vegetable-oil base and meet all of the following criteria.
(NOTE: Highly refined vegetable oils mix better than unre-
fined vegetable oils.)
• Contain emulsifiers
• Contain only EPA-exempt ingredients
• Be nonphytotoxic
• Provide good mixing quality in the compatibility jar test
• Show success in local use/experience
7 [Page 8 of 34]

Nitrogen Source
Add nitrogen to COG or MSO to improve grass weed con-
trol for species as listed in Table 4, Table 5, and Table 6.
Urea Ammonium Nitrate
(28%, 30%, or 32% nitrogen solution)
• UAN may be used in addition to COG to improve grass
weed control.
• DO NOT use brass or aluminum nozzles when spraying
UAN.
Ammonium Sulfate
• AMS may be substituted for UAN.
• When liquid AMS is used, substitute 3.0 quarts of
8-8-0 analysis for 2.5 pounds of dry AMS.
• Use high-quality AMS (i.e., spray grade) to avoid plugging
spray nozzles. Other sources of nitrogen are not as
effective.
• If AMS is added directly to the spray tank, add it slowly
while agitating. Adding AMS too quickly may clog outlet
lines. Ensure AMS is completely dissolved before adding
any other products.
• AMS, if applied at less than 10 gallons per acre, may
cause potential precipitation and clogging.
NOTE: Because most nitrogen solutions are mildly corro-
sive to galvanized, mild steel, and brass spray equipment,
rinse the entire spray system with water soon after use.
8 [Page 9 of 34]

Regional Descriptions
Region 1
(West and High and Rolling Plains)
Region 2
(Midwest, South, and Northeast)
An area of the western United States, including:
• Western Texas, western Oklahoma, and western Kansas;
west of a line running north from Del Rio, Texas, to
Gainesville, Texas, and extending along Interstate 35 to
the Oklahoma-Kansas border
• West along the Oklahoma-Kansas border to Highway 83
• North to the Kansas-Nebraska border
• West to Colorado, and including all of Colorado to the
Continental Divide
• West of the Continental Divide north to the U.S.-Canadian
border.
All other regions not listed in Region 1.
Region 1 Region 2
Application Instructions
Apply Poast Plus® herbicide to actively growing grass weeds by aerial or ground application at the rates and timing
(maximum height) listed in Table 4 (annual grass weeds), Table 5 (perennial grass weeds), and Table 6 (early and rescue
treatments to control select annual grass weeds), as instructed in the Use-specific Information section of this label. For
small area application or spot application, refer to Table 7.
NOTE: The most effective control will be achieved by applying postemergence applications of Poast Plus early in the.
growing season, when grass weeds are small. Poast Plus may not be effective on grass weeds that have grown taller
than the maximum heights listed.
Apply Poast Plus to the foliage of grass weeds uniformly and completely; large leaf canopies shelter smaller grass weeds
and can prevent adequate spray coverage. DO NOT spray to the point of runoff.
Irrigation
In irrigated areas, it may be necessary to irrigate before application of Poast Plus to ensure active grass weed growth.
Cleaning Application Equipment
Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner according to the
manufacturer's directions, followed by triple rinsing the equipment before and after applying Poast Plus.
Mixing Order
Maintain agitation throughout mixing and application.
1. Water - Fill tank 3/4 full of clean water and start agitation.
2. Inductor - If an inductor is used, rinse it thoroughly after each component has been added.
3. Products in PVA bags - Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all
water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.
4. Water-soluble additives (including dry and liquid fertilizers such as AMS or UAN)
5. Water-dispersible products (such as dry flowables, wettable powders, suspension concentrates, or
suspo-emulsions)
6. Water-soluble products
7. Emulsifiable concentrates (such as Poast Plus or COG)
8. Remaining quantity of water
9 [Page 10 of 34]

Aerial Application Methods and Equipment
The interaction of many equipment-related and weather-
related factors determines the potential for spray drift. The
applicator and the grower are responsible for considering
all these factors when making application decisions.
DO NOT apply under circumstances where possible drift
to unprotected persons; to food, forage, or other plantings
that might be damaged; or to crops that would then be
unfit for sale, use, or consumption can occur.
The following drift management requirements must be fol-
lowed to avoid off-target drift movement from aerial
applications to agricultural field crops.
1. The distance of the outermost nozzles on the boom
must not exceed 3/4 the length of the fixed wingspan or
rotor blade diameter.
2. Nozzles must always point backward parallel with the
airstream and never point downward more than
45 degrees.
Where a state has more stringent regulations, they must be
observed. The applicator should be familiar with and take
into account the information covered in the Spray Drift
Reduction Advisory Information section of this label.
Ground Application Methods and Equipment
(Broadcast)
• Apply with nozzle height no more than 4 feet above
ground or crop canopy.
• DO NOT apply when conditions favor drift from target
area or when wind speed is greater than 10 mph.
• DO NOT use selective application equipment such as
recirculating sprayers or wiper applicators.
Water Volume. Use 5 to 20 gallons of spray solution per
acre. In Region 1 (the West and High and Rolling Plains
Region; refer to Regional Descriptions), DO NOT use
less than 10 gallons of spray solution per acre.
Spray Pressure. Use 40 to 60 PSI (measured at the
boom, not at the pump or in the line). When crop foliage
and grass weed foliage are dense, use a maximum of
20 gallons of water per acre and 60 PSI.
Application Equipment. Use standard high-pressure
pesticide flat fan or hollow cone nozzles spaced up to
20 inches apart. DO NOT use flood, whirl chamber, or
controlled droplet applicator nozzles because erratic cover-
age can cause inconsistent grass weed control. To control
tall grass weeds, such as volunteer corn, the boom should
be high enough to cover the entire plant. Refer to the noz-
zle manufacturer's directions for recommended height.
When a crop, such as cotton, is 24 inches or taller and the
grass weeds are below the crop canopy, use drop nozzles
to ensure good coverage of grass weeds.
Ground Application Methods and Equipment
(Banding)
• Poast Plus® herbicide may be applied by banding to
control annual grass weeds.
• DO NOT make banding applications to control perennial
grass weeds.
• For banding applications, follow the directions in the
Ground Application Methods and Equipment
(Broadcast) section of this label.
When applying Poast Plus by banding, use the following
formulas to calculate the amount of herbicide and water
volume needed:
Bandwidth in inches Broadcast
Row width in inches rate per acre
Bandwidth in inches
Row width in inches
Broadcast
volume
per acre
Banding herbicide
rate per acre
Banding
water volume
rate per acre
10 [Page 11 of 34]

Application Rate
Grass weed application rate and timing (maximum height) are based on growing regions as described in the Regional
Descriptions section of this label. Follow the directions for your region only.
Annual Grass Weeds
Table 4. Application Rate and Timing (Maximum Height) - Annual Grass Weeds
Annual Grass Weeds
Barley, interseeded cover crops and
volunteer1'2'4
Barnyardgrass
Corn, volunteer1-2-4
Crabgrass, large1
Crabgrass, smooth1
Cupgrass, southwestern
Cupgrass, woolly
Fescue, tall (seedling)
Foxtail, giant
Foxtail, green1
Foxtail, yellow
Goosegrass
Itchgrass
Johnsongrass (seedling)
Junglerice
Lovegrass
Millet, wild proso
Oats, interseeded cover crops and
volunteer1'2'4
Oats, tame
Oats, wild1
Orchardgrass (seedling)
Panicum, browntop
Panicum, fall
Panicum, Texas
Red rice1
Rye, interseeded cover crops and
volunteer1-2'4
Ryegrass, annual
Sandbur, field
Shattercane/Wildcane'
Signalgrass, broadleaf
Sprangletop, red3
Stinkgrass
Wheat, interseeded cover crops
and volunteer1'2'4
Witchgrass1
Region 1
(West and High and Rolling Plains)
Maximum Height
(inches)
4
8
12
4
4
8
N/A
N/A
8
8
8
4
N/A
8
8
N/A
10
4
N/A
4
N/A
8
8
8
N/A
4
8
N/A
18
8
8
N/A
4
8
Product Rate
(pints/A)
3.0
2.25
2.25
2.25
2.25
2.25
N/A
N/A
2.25
2.25
2.25
2.25
N/A
2.25
2.25
N/A
1.5
3.0
N/A
2.25
N/A
2.25
2.25
2.25
N/A
3.0
2.25
N/A
2.25
2.25
2.25
N/A
3.0
2.25
Region 2
(Midwest, South, and Northeast)
Maximum Height
(inches)
4
8
20
6
6
N/A
8
6
8
8
8
6
4
8
8
6
10
4
6
4
6
8
8
8
4
4
8
3
18
8
8
6
4
8
Product Rate
(pints/A)
2.25
1.5
1.5
1.5
1.5
N/A
1.5
2.25
1.5
1.5
1.5
1.5
3.0
1.5
1.5
2.25
0.75
2.25
2.25
1.5
2.25
1.5
1.5
1.5
3.0
2.25
1.5
1.875
1.5
1.5
1.5
2.25
2.25
1,5
(continued)
11 [Page 12 of 34]

Table 4. Application Rate and Timing (Maximum Height) - Annual Grass Weeds (continued)
1 Add nitrogen to COG or MSO to improve control.
2Apply Poast Plus® herbicide before tillering.
3 DO NOT apply Poast Plus on red sprangletop in Arizona, California, or western New Mexico.
4 In Region 1, volunteer cereals emerging from late spring through early summer (May through July) may be partially or
incompletely controlled because of unfavorable conditions at application time.
N/A = Not Applicable
Perennial Grass Weeds
Table 5. Application Rate and Timing (Maximum Height) - Perennial Grass Weeds*
Perennial Grass Weeds
First Application
Bermudagrass
Guineagrass
Johnsongrass (no-till)
Johnsongrass (rhizome)
Muhly, wirestem
Quackgrass1
Ryegrass, perennial
Torpedograss
Sequential Application1
Bermudagrass
Guineagrass
Johnsongrass (no-till)
Johnsongrass (rhizome)
Muhly, wirestem
Quackgrass1
Ryegrass, perennial
Torpedograss
Region 1
(West and High and Rolling Plains)
Maximum Height
(inches)
6 (stolon)
N/A
N/A
10
N/A
8
8
N/A
Maximum Height
(inches)
4 (stolon)
N/A
N/A
8
N/A
8
8
N/A
Product Rate
(pints/A)
3.0 to 3.75*
N/A
N/A
2.25 to 3.75*
N/A
3.75
2.25
N/A
Product Rate
(pints/A)
2.25**
N/A
N/A
1.5 to 2.25**
N/A
2.25
2.25
N/A
Region 2
(Midwest, South, and Northeast)
Maximum Height
(inches)
6 (stolon)
J 8
20
25
6
8
8
8
Maximum Height
(inches)
4 (stolon)
8
12
12
6
8
8
8
Product Rate
(pints/A)
2.25
3.75
2.25
2.25
1.875
2.25
2.25
3.75
Product Rate
(pints/A)
1.5
3.75
1.5
1.5
1.875
1.5
2.25
3,75
'Add nitrogen to COC or MSO to improve control. Cultivate 7 to 14 days after first or sequential application.
* Allow a minimum of 14 days between sequential applications.
** Use 3.75 pints per acre for the following forage crops: alfalfa, birdsfoot trefoil, clover, and sainfoin.
N/A = Not Applicable
12 [Page 13 of 34]

Early Treatment and Rescue Treatment to Control Select Annual Grass Weeds in Region 2
(Midwest, South, and Northeast)
• If Poast Plus® herbicide cannot be applied at the specified height, taller annual grass weeds may be controlled with a
later application by increasing the rate of Poast Plus as directed in Table 6.
• DO NOT exceed the maximum application rate per acre per season as listed in Use-specific Information section of
the label.
Table 6. Early Treatment and Rescue Treatment to Control Select Annual Grass Weeds in Region 2
Annual Grass Weeds
Barnyardgrass
Crabgrass, large'
Crabgrass, smooth1
Foxtail, giant2
Foxtail, green2
Foxtail, yellow2
Goosegrass
Johnsongrass (seedling)
Millet, wild proso
Panicum, fall
Panicum, Texas
Signalgrass, broadleaf
Volunteer, corn1
Early Treatment
Maximum Height
(inches)
4
N/A
N/A
4
4
N/A
3
N/A
10
4
4
4
12
Product Rate
(pints/A)
1.125*
N/A
N/A
1.125
1.125
N/A
1.125
N/A
0.75
1.125
1.125
1.125
1.125
Rescue Treatment
Maximum Height
(inches)
12
8
8
16
16
16
8
16
24
12
12
12
N/A
Product Rate
(pints/A)
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
1.5
2.25
1.5
2.25
N/A
1 Add nitrogen to COG or MSO to improve control.
2 For flax, use 0.75 pint per acre when foxtail is less than 1 .5 inches high. When using the early treatment rate, foxtail
species should not have started to tiller.
* Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee,
Texas, and Virginia - Use 1 .5 pints per acre.
N/A = Not Applicable
13 [Page 14 of 34]

Small Area Application or Spot Application
• DO NOT make small area application or spot application in addition to broadcast or banding applications on the same
area.
• When using knapsack sprayers or high-volume spray equipment with handguns or other suitable nozzle arrangements,
prepare a 1.5% to 2.25% spray solution of Poast Plus® herbicide in water unless otherwise directed in the Use-
specific Information section of this label.
• Use a concentration of 1 % crop oil concentrate (COG) or methylated seed oil (MSO). Prepare the desired volume of
spray solution by mixing the amount of Poast Plus and the amount of COG or MSO in water according to Table 7.
Table 7. Spray Solution Dilution - Small Area Application or Spot Application
Spray Solution Volume
• (gallons) ' . -.;•
1
3
5
25
50
100
COC/MSO
;. (i%).
1 .3 fl ozs
3.8 fl ozs
6.4 fl ozs
2.0 pints
4.0 pints
8.0 pints
AND
Poast Plus Spray Solution
1.5%*
1 .9 fl ozs
5.8 fl ozs
9.6flozs
3.0 pints
6.0 pints
12.0 pints
OR
2.25%** V;
2.9 fl ozs
8.75 fl ozs
14.5flozs
4.5 pints
9.0 pints
18.0 pints
2 tablespoons = 1 fluid ounce
* Annual grass weeds up to 6-inches tall
** Annual grass weeds up to 1 2-inches tall. Perennial grass weeds: Application may be repeated as needed but not to
exceed the specified annual application rate.
14 [Page 15 of 34]

Use-specific Information
I Alfalfa, Birdsfoot Trefoil, Sainfoin ]
|v • , .^ _y, (dryand^undried) ^. j
• PHI
- Hay (dry): 14 days before cutting
- Forage (undried): 7 days before grazing, feeding, or
cutting
• Maximum Single Application Rate
- Hay (dry) and Forage (undried): 3.75 pints/acre
• Maximum Seasonal Application Rate
- Hay (dry) and Forage (undried): 9.75 pints/acre
• There are no livestock grazing or feeding restrictions in
alfalfa, birdsfoot trefoil, or sainfoin.
• Aerial and ground application allowed.
Poast Plus® herbicide may be applied to seedling or
established alfalfa grown for hay, silage, green chop, direct
grazing, or seed. Apply Poast Plus before mowing for the
best control of annual grass weeds. Mowed grass weeds
may form large crowns and could require repeat applica-
tions for control.
NOTE: In alfalfa, the addition of ammonium sulfate (AMS)
or urea ammonium nitrate (UAN) will enhance activity on
certain grass weed species.
Irrigated Alfalfa, Birdsfoot Trefoil, and
Sainfoin
• The timing of irrigation is important to achieve optimum
grass weed control.
• Poast Plus application 2 to 4 days after irrigation is most
effective because:
- Grass weeds have resumed active growth.
- Grass weeds have less chance to grow too large.
- Later applications allow plants to begin to canopy,
which interferes with spray coverage.
• Irrigation shortly after application (e.g., 2 days) can be
effective, but more consistent control is obtained when
irrigation is made before application.
Annual Grass Weed Control
• Apply Poast Plus at the rate and timing (maximum
height) indicated in Table 4 and Table 6.
• If grass weeds have been cut, apply after 2 to 4 inches 'of
regrowth (so there will be enough leaf area for absorption)
and before exceeding maximum height (refer to Table 4
and Table 6).
• Apply before plant canopies cover annual grass weeds
and interfere with spray coverage. NOTE: Timing appli-
cations to after a cutting following an irrigation or rainfall
will allow grass weeds to regrow to a treatable size.
• Spray spring-germinating and summer-germinating grass
weeds as early in the season as possible.
• Spray fall-germinating grass weeds in the fall soon after
they begin growing but before any killing frost.
Perennial Grass Weed Control
• Poast Plus effectively controls or suppresses perennial
grass weeds listed in Table 5. However, .a program of
repeat applications will usually provide the best results.
• The most economical way of controlling perennial grass
weeds is to disk the field before stand establishment to
thoroughly fragment rhizomes or stolons.
• In summer and fall seedings, cool-season grass weeds
(e.g., perennial ryegrass, quackgrass, wirestem muhly)
can become competitive under cool fall conditions, Fall
applications will reduce late-season growth and limit
accumulation of nutrient reserves in roots and rhizomes.
• In established stands, apply in the spring when condi-
tions favor active growth and before storage tissues have
increased their nutrient reserves.
• Make additional applications on any grass regrowth in
later cuttings.
Apricot
(bearing)
• PHI - 25 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed in treated
apricot groves or orchards. DO NOT feed livestock any-
thing from treated apricot groves or orchards.
• Ground application allowed. DO NOT apply by air.
\ Artichoke, Globe
• PHI - 7 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
|' .• ' ';•'."'• . Asparagus ' :i::-;/;- ' •'"'-.?<:]
• PHI - 1 day
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
r. . ..,..•:,-'. Avocado. .•*••',-,:.' ••'••'/;.']
[-'•' ; ••• .;.••:""";.. (hbribgafing).'>v>.'..'-.'• •• '',". y^j
• PHI - 1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated
avocado groves or orchards. DO NOT feed livestock
anything from treated avocado groves or orchards.
• Ground application allowed. DO NOT apply by air.
15 [Page 16 of 34]

To minimize potential for tree injury, direct spray away from
leaves where possible.
Beans, Dry and Succulent
•PHI
- Dry: 30 days
- Succulent: 15 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 6.0 pints/acre
• There are no livestock grazing or feeding restrictions in
beans (dry or succulent).
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Beet, Garden/table
• PHI - 60 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
Beet, Sugar
• PHI - 60 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• There are no livestock grazing or feeding restrictions in
sugar beet. NOTE: Processed pulp and molasses may
be fed to livestock.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
| Blueberryy '-_
DO NOT use on blueberry in California.
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
i Brassica Vegetables !
| [including: Broccoli (including Chinese and Raab); •
Brussels Sprouts; Cabbage (Bok Choy,
Chinese Mustard, Napa); Cauliflower; Collards;
j Kale; Kohlrabi; Mustard Greens; Rape Greens]
• PHI - 30 days
EXCEPTION: Mustard greens may be harvested after
14 days. .
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
Bulb Vegetables rS
; [including: Garlic; Leek; Onion (Dry Bulb •
j and Green); Shallot] ; -i
• PHI - 30 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 6.75 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
i Caneberries
| [All varieties and/or hybrids of these: Blackberry;
Raspberry (Red and Black); Loganberry; ;
[ Youngberry]
• PHI - 45 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
EXCEPTION: DO NOT apply by air in California.
I Canola, Crambe, and Rapeseed ^ J
DO NOT use on canola, crambe, or rapeseed in California.
• PHI - 60 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
EXCEPTION: Processed meal may be fed to animals.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Carrot
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
16 [Page 17 of 34]

Cherry, Sweet and Tart
(bearing and, nonbearing)
• PHI - 25 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed in treated cherry
(sweet or tart) groves or orchards. DO NOT feed live-
stock anything from treated cherry (sweet or tart) groves
or orchards.
• Ground application allowed. DO NOT apply by air.
Citrus
• PHI-15 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -15.0 pints/acre
• There are no livestock grazing or feeding restrictions in
citrus. NOTE: Pulp and waste may be feed to livestock.
• Ground application allowed. DO NOT apply by air.
Clover
•PHI
- Hay (dry): 20 days before grazing, feeding, or cutting
- Forage (undried): 7 days before grazing, feeding, or
cutting
• Maximum Single Application Rate
- Hay (dry) and Forage (undried): 3.75 pints/acre
• Maximum Seasonal Application Rate
- Hay (dry) and Forage (undried): 9.75 pints/acre
• There are no livestock grazing or feeding restrictions in
clover.
• Aerial and ground application allowed.
Poast Plus® herbicide may be applied to seedling or
established clover grown for hay, silage, green chop, direct
grazing, or seed. Apply Poast Plus before mowing for the
best control of annual grass weeds. Mowed grass weeds
may form large crowns and could require repeat applica-
tions for control.
DO NOT tank mix with 2,4-DB when applying Poast Plus
to clover.
Irrigated Clover
• Irrigation can be critical to the success of Poast Plus to
start grass weeds growing again.
• Poast Plus application 2 to 4 days after irrigation is most
effective because:
- Grass weeds have resumed active growth.
- Grass weeds have less chance to grow too large.
- Later applications allow plants to begin to canopy,
which interferes with spray coverage.
• Irrigation shortly after application (e.g., 2 days) can be
effective, but more consistent control is achieved when
irrigation is made before application.
Annual Grass Weed Control
• Apply Poast Plus at the rate and timing (maximum
height) indicated in Table 4 and Table 6.
• If grass weeds have been cut, apply after 2 to 4 inches of
regrowth (so there will be enough leaf area for absorption)
and before exceeding maximum height (refer to Table 4
and Table 6).
• Apply before plant canopies cover grass weeds and
interfere with spray coverage. NOTE: Timing applications
to after a cutting following an irrigation or rainfall will allow
grass weeds to regrow to treatable size,
• Spray spring-germinating and summer-germinating grass
weeds as early in the season as possible.
• Spray fall-germinating grass weeds in the fall soon after
they begin growing, but before any killing frost.
Perennial Grass Weed Control
• Poast Plus effectively controls or suppresses perennial
grass weeds listed in Table 5. However, a program of
repeat applications will usually provide the best results.
• For the most economical perennial grass weed control,
disk the field before stand establishment to thoroughly
fragment rhizomes or stolons.
• In summer and fall seedings, cool-season grass weeds
(e.g., perennial ryegrass, quackgrass, wirestem muhly)
can become competitive under cool fall conditions. Fall
applications will reduce late-season growth and limit
accumulation of nutrient reserves in roots and rhizomes.
• In established stands, apply in the spring when condi-
tions favor active growth and before storage tissues have
increased their nutrient reserves.
• Make additional applications on any grass regrowth in the
later cuttings.
| Conservation Reserve Land : ;f j
For this application, DO NOT use west of the Rocky
Mountains.
• PHI - There is no PHI when applying to Conservation
Reserve land unless application is being made to alfalfa,
birdsfoot trefoil, clover, or sainfoin.
Alfalfa, birdsfoot trefoil, or sainfoin PHI
- Hay (dry): 14 days before cutting
- Forage (undried): 7 days before grazing, feeding, or
cutting
Clover cover crops PHI
- Hay (dry): 20 days before cutting
- Forage (undried): 7 days before grazing, feeding, or
cutting
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Annual Application Rate -11.25 pints/acre
EXCEPTION: If applying to alfalfa, birdsfoot trefoil,
clover, or sainfoin, DO NOT apply more than a total of
9.75 pints/acre/season.
17 [Page 18 of 34]

• DO NOT harvest or graze cover crops other than alfalfa,
birdsfoot trefoil, clover, or sainfoin treated with
Poast Plus® herbicide. DO NOT feed livestock cover
crops other than alfalfa, birdsfoot trefoil, clover, or sainfoin
from treated Conservation Reserve Land.
• Aerial and ground application allowed.
Broadleaf Cover Crops. The growth of broadleaf cover
crops (e.g., alfalfa, birdsfoot trefoil, clover, lespedeza,
vetches) will not be affected by application of Poast Plus.
Grass Cover Crops. Most seeded grass crops
(e.g., bromegrasses, oats, orchardgrass, ryegrass,
Sudangrass, tall fescue, or timothy) will be injured or killed
by Poast Plus. DO NOT apply Poast Plus to these grass
cover crops if injury is undesirable.
[ ' /; . ./,;' • • Corn*Field : ••' '
| includingPoast® Protected hybrids ,
DO NOT use on field corn in California.
•PHI
- Grain and Fodder: 60 days
- Forage and Silage: 45 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• There are no livestock grazing or feeding restrictions in
field corn.
• Aerial and ground application allowed.
Preplan! Burndown Treatment
Apply Poast Plus to actively growing grass weeds at
1.5 pints/acre 30 days or more before planting corn. Use
2.0 to 4.0 pints of UAN or 1.0 to 2.0 pounds of AMS plus
COC or MSO at 1.0 to 2.0 pints/acre.
Poast® Protected hybrids ONLY
Only Poast Protected field corn hybrids are tolerant
to in-crop Poast Plus application. DO NOT use on
other field corn hybrids or severe crop injury will
occur to field corn hybrids not designated as
Poast Protected corn.
Over-the-top application (after corn emergence) of
Poast Plus in Poast Protected field corn may be made
until onset of pollen shed if appropriate preharvest intervals
are observed. DO NOT apply Poast Plus after pollination.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Corn, Sweet i
(Poast® Protected hybrids ONLY) i
Only Poast Protected sweet corn hybrids are tolerant
to Poast Plus application. DO NOT use on other
sweet corn hybrids or severe crop injury will occur
to sweet corn hybrids not designated as
Poast Protected corn.
• PHI
- Grain and Fodder: 45 days
- Forage, Silage, and Fresh Sweet Corn: 30 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• There are no livestock grazing or feeding restrictions in
sweet corn.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Application of Poast Plus in Poast Protected sweet corn
may be made until the onset of pollen shed. DO NOT
apply Poast Plus after pollination. A second application of
Poast Plus in Poast. Protected sweet corn may be made
10 days or more after the first application.
i Cotton ]
• PHI - 40 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
EXCEPTION: Processed meal may be fed to animals.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Cranberry
DO NOT use on cranberry in California.
• PHI - 60 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 6.75 pints/acre
• DO NOT allow livestock to graze or feed treated bog or
field. DO NOT feed livestock anything from treated bog
or field.
• Aerial and ground application allowed.
Crops Grown for Seed i
Poast Plus can be used on all crops listed in this label
when they are grown for seed production. Use the rate
indicated for the crop, as detailed in this Use-specific
Information section. Slight modifications in application
methods may be required for certain seed crops because
of crop canopy or different cultural methods from the corre-
sponding crop.
18 [Page 19 of 34]

:;, ;. Cucurbit Vegetables
! [including: Cantaloupes (all);'Cucumber; Gherkin;
Honeydew Melon; Muskmelon (all);,Pumpkin;
• ," Squash (all); Watermelon]
• PHI- 14 days
EXCEPTION: Cantaloupe may be harvested after
3 days.
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
Date
(nonbearing)
• PHI -1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated date
groves or orchards. DO NOT feed livestock anything
from treated date groves or orchards.
• Ground application allowed. DO NOT apply by air.
To minimize potential for tree injury, direct spray away from
leaves where possible.
I - , Fig,
' - (nonbearing) , ]
• PHI -1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated fig
groves or orchards. DO NOT feed livestock anything
from treated fig groves or orchards.
• Ground application allowed. DO NOT apply by air.
To minimize potential for tree injury, direct spray away from
leaves where possible.
I ?jpihe ^seueVdroww f orTXiiffgrJassTSeeci 1t.:l,ii::rK;i-.i<i;£»iitis.^ii;^,,^.Ttj?^^iji^,:.i;i_.;.:,^^,:.;:,: _.-?i.* .viJ"..--. ^-:-j:..J
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT apply more than 2 applications per season.
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed treated fescue screenings or hay to
livestock.
• Ground application allowed. DO NOT apply by air.
Only apply Poast Plus® herbicide to fine fescue varieties
classified as creeping red (Festuca rubra), Chewings
(Festuca nigrescens), and hard fescue (Festuca ovina). Use
standard high-pressure pesticide hollow cone or flat fan
nozzles (minimum of 40 PSI at the nozzle); apply at least
10 gallons of water per acre. If foliage is dense, increase
water volume to 20 gallons per acre (minimum of 60 PSI).
Thorough foliar spray coverage is essential.
• DO NOT apply to tall fescue (Schedonorus arundinaceus)
or any other desired grass plant. Injury will occur.
• Poast Plus does NOT control annual bluegrass
(Poa annua) or rattail fescue (Vulpia myuros).
• DO NOT apply if rainfall is expected within 1 hour of
application.
• DO NOT use flood or whirl chamber nozzles or selective
application equipment (e.g., recirculating sprayers, wiper
applicators, shielded applicators).
For control of annual ryegrass, colonial and highland bent-
grasses, cheatgrass/downy brome, and German
velvetgrass, apply when fine fescue is semi-dormant
(generally November 1 through March 15). Application at
other times of the year can result in reduced control. Refer
to Table 9 for application rate and timing (maximum height)
information.
Table 9. Application Rate and Timing
(Maximum Height) - Fine Fescue Grown for
Turfgrass Seed
Turfgrass Species
Maximum
Height*
(inches)
Rate per
Acre**
(pints)
Annual Turfgrass
Annual ryegrass
(Lolium multiflorum)
Cheatgrass/Downy brome
(Bromus tectorum)
4 to 8
2 to 6
2.25
3.75
NOTE: Late fall applications, after maximum germination,
produce the best results.
Perennial Turfgrass ». - , J
German velvetgrass
(Holcus moltis)
Colonial bentgrass
Highland bentgrass
(Agrost/s tenuis)
2 to 4
2 to 4
3.0 to 3.75
2.25 to 3.75
NOTE: Use the higher rate on well-established grass
weeds.
'When fine fescue is semi-dormant
** If regrowth occurs or new plants emerge, make a second application
at the same rate.
I ' Flax '^\ . IDO NOT use on flax in California.
• PHI 75 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 6.0 pints/acre
• There are no livestock grazing or feeding restrictions in
flax. NOTE: Processed meal may be fed to animals.
• Aerial and ground application allowed.
19 [Page 20 of 34]

To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
1
• PHI - 20 days
EXCEPTION: Peppers (all) may be harvested after
7 days.
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 6.75 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
• PHI - 50 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated vine-
yard. DO NOT feed livestock anything from treated
vineyard. EXCEPTION: Pomace and raisin waste may
be fed to animals.
• Ground application allowed. DO NOT apply by air.
¥ j
vi
• PHI - 30 days
EXCEPTION: In Florida, celery may be harvested after
14 days.
EXCEPTION: In Illinois, Indiana, Michigan, Minnesota,
and Wisconsin, rhubarb may be harvested after 15 days.
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
EXCEPTION: DO NOT apply to rhubarb by air.
Horserad.sh
DO NOT use on horseradish in California.
• PHI - 60 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Ground application allowed. DO NOT apply by air.
•PHI-15 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 4.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
DO NOT use on lentil in California,
• PHI - 50 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 6.0 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
• PHI - 45 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
• PHI - 20 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field. '
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
• PHI - 25 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed in treated
nectarine groves or orchards. DO NOT feed livestock
anything from treated nectarine groves or orchards.
• Ground application allowed. DO NOT apply by air.
20 [Page 21 of 34]

Nonagricultural Land
DO NOT use on red sprangletop in Arizona, California, or
western New Mexico.
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Annual Application Rate -11.25 pints/acre
• DO NOT allow livestock to graze or feed treated non-
agricultural land. DO NOT feed livestock anything from
treated nonagricultural land.
• Ground application allowed. DO NOT apply by air.
Nonagricultural lands include private, public, and military
lands as follows:
• Uncultivated nonagricultural areas (including sewage dis-
posal areas and airport, highway, railroad, and utility
rights-of ways, roadsides, and other paved areas)
• Uncultivated agricultural areas - Noncrop producing
(including farmyards, fuel and other storage areas, fence
and hedge rows, nonirrigation ditchbanks, and barrier
strips)
• Industrial sites - Outdoor (including lumberyards, electri-
cal transformer and pipeline pumping stations, storage
areas, and tank farms)
• Natural areas (including wildlife management areas,
wildlife openings, wildlife habitats, recreation areas,
campgrounds, trailheads, and trails)
• Potting soil and topsoil.
NOTICE TO USER: Due to difference in plant
species/variety and application techniques, neither the
manufacturer nor the seller has determined whether or not
Poast Plus® herbicide can be safely used on all
species/varieties under all conditions. It is the responsibility
of the applicator and grower to test and determine if
Poast Plus can be used safely on the species/variety to
be treated under the conditions expected to be encoun-
tered at the time of application. Test in a small area first,
before wide-scale use. Any adverse conditions/effects
should be visible within 7 days of application.
j , „ Olive
i . - (non bearing)
• PHI - 1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated olive
groves or orchards. DO NOT feed livestock anything
from treated olive groves or orchards.
• Ground application allowed. DO NOT apply by air.
To minimize potential for tree injury, direct spray away from
leaves where possible.
t Orchard Floor Middles
I, ^ (growth management) " -- .
• Maximum Single Application Rate - 0.75 pint/acre
• Maximum Annual Application Rate - 0.75 pint/acre
• DO NOT allow livestock to graze or feed in treated
orchard floor middles. DO NOT feed livestock anything
from treated orchard floor middles.
• Ground application allowed. DO NOT apply by air.
Tank Mixes with 2,4-D Dimethylamine
Use this tank mix to reduce the number of mechanical
mowings in cool-season grasses and mixtures of Kentucky
bluegrass, perennial ryegrass, and tall fescue found in
orchard floor middles.
NOTE: Some discoloration of turfgrass may occur; howev-
er, treatment effects will wear off with regrowth and
greenup.
• Make ONE of the following applications per season:
- Apply this tank mix during the spring or summer when
growth management is desired. DO NOT apply during
bloom or less than 3 days after mowing.
- Optimally, apply after turfgrass greenup in the spring
(before any mowing) or 3 days after the first mowing of
the season. NOTE: This treatment will provide 5 to
8 weeks of growth management depending on
turfgrass makeup (i.e., grass species, broadleaf weed
pressure), environmental conditions, and desired main-
tenance height of orchard floor middles.
Tank Mix Specific Restrictions
• DO NOT make more than 1 application per season.
• DO NOT apply if rainfall or irrigation is expected within
6 hours of application.
• DO NOT apply to turfgrass less than 2 years old.
• DO NOT apply to newly established orchards. Trees
must be at least 1 year old and in vigorous condition.
\ Peach „ 1
1 v (bearing) ' , , i
• PHI - 25 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed in treated peach
groves or orchards. DO NOT feed livestock anything
from treated peach groves or orchards.
• Ground application allowed. DO NOT apply by air.
• Peanut^ 1
• PHI - 40 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 3.75 pints/acre
• DO NOT allow livestock to graze or feed treated field.
EXCEPTION: Processed meal may be fed to animals.
• Aerial and ground application allowed.
21 [Page 22 of 34]

To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of DAN.
| Peas, Dry and Succulent 1
Pomegranate
(nonbearing)
•PHI
- Dry: 30 days
- Succulent: 15 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 6.0 pints/acre
• There are no livestock grazing or feeding restrictions in
peas.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Pistachio i
• PHI-15 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -15.0 pints/acre
• DO NOT allow livestock to graze or feed in treated pista-
chio groves or orchards. DO NOT feed livestock anything
from treated pistachio groves or orchards.
• Ground application allowed. DO NOT apply by air.
For bearing pistachio trees, only apply as a directed spray
to the grove floor.
Plum
(nonbearirigy
• PHI - 1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated plum
groves or orchards. DO NOT feed livestock anything
from treated plum groves or orchards.
• Ground application allowed. DO NOT apply by air.
To minimize potential for tree injury, direct spray away from
leaves where possible.
Pome Fruits
[including: Apple, Crabapple, Pear, Quince]
•PHI-14 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed treated pome
fruit groves or orchards. DO NOT feed livestock anything
from treated pome fruit groves or orchards.
EXCEPTION: Pressed or processed apple waste may
be fed to animals.
• Ground application allowed. DO NOT apply by air.
• PHI - 1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
11.25 pints/acre
• DO NOT allow livestock to graze or feed in treated
pomegranate groves or orchards. DO NOT feed livestock
anything from treated pomegranate groves or orchards.
• Aerial and ground application allowed.
To minimize potential for tree injury, direct spray away from
leaves where possible.
; Potato, Field
(excluding sweet potato)
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
EXCEPTION: Potato wastes may be fed to animals.
• Aerial and ground application allowed.
NOTE: For heavy infestations of quackgrass in potato,
apply 3.75 pints of Poast Plus* herbicide per acre fol-
lowed by a sequential application of 2.25 pints, if needed.
Tank Mix Specific Restrictions with
Metribuzin-containing Products
• In California, DO NOT tank mix Poast Plus with
metribuzin-containing products for application to potato.
• Only apply to non-early maturing russetted or white-
skinned varieties of potato.
• PHI - 60 days, if tank mixed with metribuzin-containing
products
• DO NOT apply unless there have been 3 prior succes-
sive days of sunny weather, or crop injury may occur.
• DO NOT add AMS or UAN.
• DO NOT use on: Bermudagrass, itchgrass, quackgrass,
red rice, rhizome Johnsongrass, shattercane, volunteer
cereal or corn, or wirestem muhly.
Potato, Sweet : j
(excluding field potato) _ !
Eastern U.S. (Alabama, Florida, Georgia, Louisiana,
Mississippi, North Carolina, South Carolina,
Tennessee, and Texas)
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
•. DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated .field.
• Aerial and ground application allowed.
22 [Page 23 of 34]

zff,
Western U.S. (Arizona, California, Hawaii, Idaho,
Nevada, Oregon, and Washington)
• PHI - 60 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
DO NOT apply a tank mix of Poast Plus® herbicide and
metribuzin to sweet potato (or yams).
Sunflower
r "".'• Prune '.'.
(honbearing)
• PHI - 1 year
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -
1 1 .25 pints/acre
• DO NOT allow livestock to graze or feed in treated prune
groves or orchards. DO NOT feed livestock anything
from treated prune groves or orchards.
• Ground application allowed. DO NOT apply by air.
To minimize potential for tree injury, direct spray away from
leaves where possible.
[ Safflower {
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
p- i" :.';:; • '.'••.•;•'- Soybean .' . ' .'-... • .. \
. NOTE: In California, the maximum application rate is
3.0 pints per acre.
• PHI - 75 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• Only processed meal from seed and hay may be grazed
or fed to livestock.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
• PHI - 7 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 3.75 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
EXCEPTION: DO NOT apply by air in California.
• PHI - 70 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 3.75 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
EXCEPTION: Processed meal and soapstock may be
fed to livestock.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
Commercially released varieties of sunflower are tolerant to
Poast Plus at all stages of growth. DO NOT use
Poast Plus on sunflower inbred lines grown for seed.
NOTE: Leaf speckling occasionally has been observed
with no corresponding reduction in vigor or growth.
j Tall Fescue Growth Suppression i
j ':•: ; • (in Npnagricultural L^nty/^ > • -.'"-, !
Tall fescue must be 1-year old before the first
application.
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Annual Application Rate -11.25 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
Apply 1.5 to 1.875 pints per acre of Poast Plus to actively
growing tall fescue:
• After it has 4 to 6 inches of new growth
• Before the emergence of seedheads
For optimum control, DO NOT mow tall fescue for 30 days
before or 14 days after treatment. For greater suppression,
apply up to 3.75 pints per acre. NOTE: Because of envi-
ronmental differences at the time of application, and the
growth differences of tall fescue, control may exceed or fall
short of that desired (e.g., applications made July 1 to
mid-August may be less effective, especially if day temper-
atures reach 90° F).
Tobacco
DO NOT use on tobacco in California.
• PHI - 42 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 6.0 pints/acre
« DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
To control crabgrass, shattercane, volunteer corn and all
volunteer cereals, and witchgrass, add 2.5 pounds of AMS
or 4.0 to 8.0 pints of UAN.
23 [Page 24 of 34]

Sequential Application
• Application 1 - Apply to plantbed seedlings up to
4 weeks before transplanting to the field.
- Maximum application rate - 1.5 pints/acre
• Application 2 - Apply up to 3 weeks after transplanting.
- Maximum application rate - 2.25 pints/acre
• Application 3 - Apply up to 7 weeks after transplanting.
- Maximum application rate-2.25 pints/acre
NOTE: Poast Plus® herbicide may be applied at the
seedbed stage of growth.
I.- h' .f-'.'A -""''•:'''..' Tomato '; , ;. • ..,]
• PHI - 20 days
• Maximum Single Application Rate - 2.25 pints/acre
• Maximum Seasonal Application Rate - 6.75 pints/acre
• DO NOT allow livestock to graze or feed, treated field.
DO NOT feed livestock anything from treated field.
EXCEPTION: Tomato waste may be fed to livestock.
• Aerial and ground application allowed.
Tank Mix Specific Restrictions with
Metribuzin-containing Products
• In California, DO NOT tank mix Poast Plus with
metribuzin-containing products for application to tomato.
• DO NOT add AMS or UAN.
• DO NOT use on: Bermudagrass, itchgrass, quackgrass,
red rice, rhizome Johnsongrass, shattercane, volunteer
cereal or corn, or wirestem muhly.
• DO NOT treat transplanted tomatoes within 14 days of
transplanting. Tomatoes must have recovered from trans-
plant shock and new growth must be evident.
• DO NOT treat seeded tomatoes until plants have
reached the 5 to 6 leaf stage.
i: '.•/•• •; x^'• •/- :Tree'Nuts,:. . ' •" • : '•.•••!
Poast Plus may be used in bearing and nonbearing tree
nuts.
• PHI-15 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate -15.0 pints/acre
• DO NOT allow livestock to graze or feed treated tree nut
groves or orchards. DO NOT feed livestock anything
from treated tree nut groves or orchards.
EXCEPTION: In almond, only almond hulls may be fed
to animals.
• Ground application allowed. DO NOT apply by air.
Tree nuts are very tolerant to Poast Plus; application may
be made over the top of small, nonbearing trees or as a
directed spray on larger trees.
Tuberous and Corm Vegetables
[Arracacha; Arrowroot; Artichoke (Chinese and
Jerusalem); Canna (Edible); Cassava (Bitter and
.."• Sweet); Chayote Root; Chufa; Dasheen (Taro);
Ginger; Leren; Potato, Tanier; Turmeric;
Yam Bean; Yam (True)]
• PHI - 30 days
• Maximum Single Application Rate - 3.75 pints/acre
• Maximum Seasonal Application Rate - 7.5 pints/acre
• DO NOT allow livestock to graze or feed treated field.
DO NOT feed livestock anything from treated field.
• Aerial and ground application allowed.
Poast Plus can be used on all crops listed in this label for
the purpose of establishing and maintaining wildlife food
plots. Use the rate indicated for the crop and follow all
associated restrictions and limitations, as detailed in this
Use-specific Information section.
24 [Page 25 of 34]

Conditions of Sale and Warranty
The Directions For Use of this product reflect the
opinion of experts based on field use and tests. The
directions are believed to be reliable and must be followed
carefully. However, it is impossible to eliminate all risks
inherently associated with the use of this product. Crop
injury, ineffectiveness or other unintended consequences
may result because of such factors as weather conditions,
presence of other materials, or use of the product in a
manner inconsistent with its labeling, all of which are
beyond the control of BASF CORPORATION ("BASF") or
the Seller. To the extent consistent with applicable law, all
such risks shall be assumed by the Buyer.
BASF warrants that this product conforms to the chemical
description on the label and is reasonably fit for the
purposes referred to in the Directions For Use, subject
to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER'S EXCLUSIVE REMEDY AND BASF'S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS PRODUCT.
BASF and the Seller offer this product, and the Buyer and
User accept it, subject to the foregoing Conditions of
Sale and Warranty which may be varied only by
agreement in writing signed by a duly authorized
representative of BASF. nos Poasf and Poast Plus are registered trademarks of BASF.
© 2014 BASF Corporation
AIJ rights reserved.
007969-00088.20131 OSOd.NVA 2013-04-026-0185'
Based on: NVA 2013-04-026-0010
Supersedes: NVA 2008-04-026-0356
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
D BASFThe Chemical Company
25 [Page 26 of 34]

-BASFThe Chemical Company
Group Herbicide
Poast Plus[Alternate Brand Name] Rezult® G herbicide herbicide
Postemergence herbicide for dry beans, dry peas, peppermint and
spearmint, and soybean
Active Ingredient:
sethoxydim: 2-[1 -(ethoxyimino)butyl]-5-[2-(ethylthio)propyl]-
3-hydroxy-2-cyclohexen-1 -one* 13.0%
Other Ingredients: 87.0%
Total: 100.0%
'Equivalent to 1 pound of sethoxydim per gallon formulated as an emulsifiable concentrate
Contains petroleum distillate
EPA Reg. No. 7969-88 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCION
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
details. (If you do not understand the label, find someone to explain it to you in detail.)
See inside for complete First Aid, Precautionary Statements, Directions For Use,
Conditions of Sale and Warranty, and state-specific crop and/or use site restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Corporation
26 Davis Drive, Research Triangle Park, NC 27709
[Page 27 of 34]

FIRST AID
If swallowed
If on skin or clothing
If in eyes
If inhaled
• Immediately call a poison control center or doctor.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give any liquid to the person.
• DO NOT give anything by mouth to an unconscious person.
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
• Hold eyes open and rinse slowly and gently with water for 1 5 to 20 minutes.
• Remove contact lenses, if present, after first 5 minutes; then continue rinsing eyes.
• Call a poison control center or doctor for treatment advice.
• Move person to fresh air.
• If person is not breathing, call 91 1 or an ambulance; then give artificial respiration,
mouth to mouth, if possible.
• Call a poison control center or doctor for further treatment advice.
preferably
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
In case of medical emergency involving this product, call BASF Corporation at 1 -800-832-HELP (4357) or dial 911.
NOTE TO PHYSICIAN
May pose an aspiration pneumonia hazard. Contains petroleum distillate.
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Causes moderate eye injury. Harmful if swal-
lowed or absorbed through skin. Avoid contact with skin,
eyes, or clothing.
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
• Long-sleeved shirt and long pants
• Chemical-resistant gloves, such as barrier laminate,
nitrile rubber > 14 mils, neoprene rubber > 14 mils, or
viton > 14 mils
• Shoes plus socks
Follow manufacturer's instructions for cleaning and main-
taining PPE. If no such instructions for washables exist, use
detergent and hot water. Keep and wash PPE separately
from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE
requirements may be reduced or modified as specified in
the WPS.
USER SAFETY RECOMMENDATIONS
Users should:
• Wash hands before eating, drinking, chewing gum,
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean clothing.
• Remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon as
possible, wash thoroughly and change into clean
clothing.
Environmental Hazards
For terrestrial uses, DO NOT apply directly to water, or to
areas where surface water is present, or to intertidal areas
below the mean high water mark. DO NOT contaminate
water when disposing of equipment washwater or rinsate.
This product is toxic to aquatic organisms.
Endangered Species Concerns
NOTE: The use of any pesticide in a manner that may kill
or otherwise harm an endangered or threatened species or
adversely modify their habitat is a violation of federal law.
Directions For Use
It is a violation of federal law to use this product in a manner
inconsistent with its labeling. This label must be in posses-
sion of the user at the time of herbicide application.
DO NOT apply this product in a way that will contact work-
ers or other persons, either directly or through drift. Only
protected handlers may be in the area during application.
For requirements specific to your state or tribe, consult the
agency responsible for pesticide regulation.
2 [Page 28 of 34]

Observe all precautions and limitations in this label and the
labels of products used in combination with Poast Plus®
herbicide.'Use of Poast Plus not consistent with this
label can result in injury to crops, animals, or persons.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and
with the Worker Protection Standard, 40 CFR Part 170.
This standard contains requirements for the protection of
agricultural workers on farms, forests, nurseries, and
greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination, notifi-
cation, and emergency assistance. It also contains
specific instructions and exceptions pertaining to the
statements on this label about personal protective equip-
ment (PPE) and restricted-entry interval. The requirements
in this box only apply to uses of this product that are cov-
ered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 48 hours.
PPE required for early entry to treated areas that is permit-
ted under the Worker Protection Standard and that
involves contact with anything that has been treated, such
as plants, soil, or water, is:
• Coveralls
• Chemical-resistant gloves, such as or made of any
waterproof material
• Shoes plus socks
• Protective eyewear
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or
disposal.
Pesticide Storage
DO NOT allow this product to freeze. DO NOT store
below 32° F or above 100° F. Store in original container
only, in a dry place away from heat or open flame. Store in
an area separately from feed or foodstuffs.
Pesticide Disposal
To avoid pesticide waste, use all material in this container
by application according to label directions. If pesticide
waste cannot be avoided, offer remaining product to a
waste disposal facility or pesticide disposal program
(often such programs are run by state or local govern-
ments or by industry).
Container Handling
Nonrefillable Container. DO NOT reuse or refill this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landfill, or by inciner-
ation, or by other procedures approved by state and local
authorities.
(continued)
STORAGE AND DISPOSAL (continued)
Container Handling (continued)
Triple rinse containers small enough to shake
(capacity <, 5 gallons) as follows: Empty the remaining
contents into application equipment or a mix tank and
drain for 10 seconds after the flow begins to drip. Fill the
container 1/4 full with water and recap. Shake for 10 sec-
onds. Pour rinsate into application equipment or a mix
tank, or store rinsate for later use or disposal. Drain for
10 seconds after the flow begins to drip. Repeat this pro-
cedure two more times.
Triple rinse containers too large to shake
(capacity > 5 gallons) as follows: Empty the remaining
contents into application equipment or a mix tank. Fill the
container 1/4 full with water. Replace and tighten clo-
sures. Tip container on its side and roll it back and forth,
ensuring at least one complete revolution, for 30 seconds.
Stand the container on its end and tip it back and forth
several times. Turn the container over onto its other end
and tip it back and forth several times. Empty the rinsate
into application equipment or a mix tank, or store rinsate
for later use or disposal. Repeat this procedure two more
times.
Pressure rinse as follows: Empty the remaining con-
tents into application equipment or mix tank and continue
to drain for 10 seconds after the flow begins to drip. Hold
container upside down over application equipment or mix
tank, or collect rinsate for later use or disposal. Insert
pressure rinsing nozzle in the side of the container-and
rinse at about 40 PSI for at least 30 seconds. Drain for
10 seconds after the flow begins to drip.
Refillable Container. Refill this container with pesticide
only. DO NOT reuse this container for any other purpose.
Triple rinsing the container before final disposal is the
responsibility of the person disposing of the container.
Cleaning before refilling is the responsibility of the refiller.
Triple rinse as follows: To clean the container before
final disposal, empty the remaining contents from this
container into application equipment or mix tank. Fill the
container about 10% full with water. Agitate vigorously or
recirculate water with the pump for 2 minutes. Pour or
pump rinsate into application equipment or rinsate collec-
tion system. Repeat this rinsing procedure two more
times.
When this container is empty, replace the cap and seal all
openings that have been opened during use; return the
container to the point of purchase or to a designated
location. This container must only be refilled with a pesti-
cide product. Prior to refilling, inspect carefully for damage
such as cracks, punctures, abrasions, worn-out threads
and closure devices. Check for leaks after refilling and
before transport. DO NOT transport if this container is
damaged or leaking. If the container is damaged, or leak-
ing, or obsolete and not returned to the point of purchase
or to a designated location, triple rinse emptied container
and offer for recycling, if available, or dispose of container
in compliance with state and local regulations.
3 [Page 29 of 34]

In Case of Emergency
In case of a spill of this product, call:
Table 1. Weeds Controlled by the Tank Mix of
Poast Plus® herbicide + Rezult® B herbicide (continued)
• CHEMTREC
• BASF Corporation
1-800-424-9300
1-800-832-HELP(4357)
Steps to take if this material is released into the
environment or spilled:
• Wear Personal Protective Equipment (PPE) and avoid
exposure when managing a spill. (See Precautionary
Statements section of this label for required PPE.)
• Dike and contain the spill with inert, absorbent material
(e.g., sand, earth) and transfer liquid and solid diking
material to separate containers for disposal. Small-scale
spills of Poast Plus® herbicide (that can be cleaned up
with a typical spill kit) may be applied to labeled sites.
• Remove contaminated clothing, and wash affected skin
areas with soap and water. Wash clothing before reuse.
•Keep spill out of all sewers and open bodies of water.
Product Information
Use the tank mix application of Poast Plus + Rezult® B
herbicide in dry beans, dry peas, peppermint and
spearmint, and soybean for postemergence control of a
wide spectrum of broadleaf and grass weeds listed in
Table 1.
Refer to the Crop-specific Information section of this
label for recommendations on herbicide tank mixtures and
sequential programs.
Table 1. Weeds Controlled by the Tank Mix of
Poast Plus® herbicide + Rezult® B herbicide
Weeds
Maximum
Weed Height
(inches)
Broadleaf'
Balloonvine
Beggarticks
Bristly starbur
Cocklebur
Dayflower
Groundsel, common
Jimsonweed
Ladysthumb
Lambsquarters, common
Marshelder
Mayweed/Dogfennel
Prickly sida/Teaweed
Purslane, common
3
8
3
10
8
3
10
10
2
4
3
4
2
(continued)
Weeds
Maximum
Weed Height
(inches)
Broi^iea/fJ^^ife^;;'"^';,;;:;;^ "^. ^-^"'^^viV'j-M^-l
Radish, volunteer
Ragweed, common
Ragweed, giant
Redweed
Shepherdspurse
Smartweed, Pennsylvania
Spurred anoda
Tropic croton
Velvetleaf
Venice mallow
Wild buckwheat
Wild mustard
Wild poinsettia
Wild sunflower'
10
3
6
8
8
10
4
4
6
4
5
8.
6
8
• • ' ' "• •• " t. -.•*.*"" <• ' , - • ,."•-•- - • --•-;.'J /;.-- .'.• -••-'IV* a fi?~£ s.-:-.l!"i.v "' ^-ev-'-if '-""
SGlfc'SS^cKA.Vv..; .•'- :'•*• '"•'i>''"5^'I>;;.''^|Jf iV^^^.'^
Barnyardgrass
Broadleaf signalgrass
Crabgrass, large
Crabgrass, smooth
Foxtail, giant
Foxtail, green
Foxtail, yellow
Goosegrass
Johnsongrass, seedling
Junglerice
Panicum, browntop
Panicum, fall
Panicum, Texas
Red sprangletop
Ryegrass, annual
Shattercane2
Volunteer corn
Wild oats
Wild proso millet
Witchgrass
Woolly cupgrass
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
10
3
8
4
4
.4, [Page 30 of 34]

Table 1. Weeds Controlled by the Tank Mix of
Poast Plus® herbicide + Rezulf8 B herbicide (continued)
Weeds
Maximum
Weed Height
(inches)
;^efe^hlafc(top-gi%wtf|^f ppressiort),;^ i-v"f;^-i,;"^V 'J- ^-':- *
Canada thistle1
Johnsongrass2, rhizome
Quackgrass2
Wirestem muhly2
Yellow nutsedge'
bud stage
12
4
4
8
1 For regrowth or new germination, make a second application 7 to
10 days later with Rezult B.
2 For regrowth or new germination, a follow-up application of Poast Plus
may be necessary.
Mode of Action
The tank mix of Poast Plus + Rezult B is herbicidally
effective through both foliar contact and systemic activity.
Weeds must be thoroughly covered with spray. Large crop-
and-weed-leaf canopies shelter smaller weeds and prevent
adequate spray coverage.
Crop Tolerance
Essentially all grass crops (e.g. ornamental grass, turfgrass,
as well as cereal grain crops such as sorghum, corn, small
grains) are susceptible to Poast Plus + Rezult B; there-
fore, avoid all direct or indirect contact with any grass crop.
Rotational Crops
The tank mix of Poast Plus + Rezult B has no crop rota-
tion restrictions.
Application instructions
Application Rate and Timing
Tank Mix Application
In a single tank mix application, apply 1.6 pints per acre
Poast Plus plus 1.6 pints per acre Rezult B early
postemergence to actively growing weeds before they
reach the maximum sizes listed in Table 1.
DO NOT apply the single tank mix application of
Poast Plus + Rezult B in any rate combination other
than a 1:1 ratio.
In a single application or in one growing season, DO NOT
exceed the maximum total cumulative tank mix rate of
3.2 pints per acre (1.6 pints per acre Poast Plus +
1.6 pints per acre Rezult B).
Sequential Application
If weeds regrow or new weeds germinate after the initial
single tank mix application of Poast Plus + Rezult B,
sequential applications of either Poast Plus or Rezult B
may be applied in each crop at use rates specified in the
Crop-specific Information section.
Application Methods and Equipment
Ground Application
Thorough spray coverage is required for control of
emerged weeds. Use a minimum spray volume of 10 gal-
lons of water per acre to ensure adequate spray coverage.
Use up to 20 gallons of water per acre when crop and
weed foliage is dense. DO NOT use flood or whirl-
chamber nozzles. DO NOT use brass nozzles because of
the corrosive effects of nitrogen additives.
Aerial Application
Use a minimum spray volume of 5 gallons of water per
acre. To obtain uniform coverage and to avoid off-target
drift movement, applicators must observe the following
requirements:
• Boom Length - The distance of the outermost nozzles
on the boom must not exceed 3/4 the length of the fixed
wingspan or 90% of rotor-blade diameter.
• Nozzle Type - Use low-drift nozzles such as straight-
stream (D-8 or larger). DO NOT use nozzles producing a
mist droplet spray.
• Nozzle Orientation - Nozzles must always point back-
ward parallel with the airstream and never be pointed
downward more than 45 degrees.
• Application Height - Without compromising aircraft
safety, apply at a height of 10 feet or less above the crop
canopy or tallest plants.
DO NOT apply Poast Plus + Rezult B by aircraft within
200 feet upwind of grasses (ornamental or turfgrass), orna-
mental plants, or sensitive nontarget crops such as corn,
cotton, small grains, sugar beets, or sunflowers.
Cleaning Spray Equipment
Clean application equipment thoroughly by using a strong
detergent or commercial sprayer cleaner according to the
manufacturer's directions, followed by triple rinsing the
equipment before and after applying Poast Plus +
Rezult B.
Mixing Order
1. Water - Fill tank 1/2 to 2/3 full with clean water and start
agitation.
2. Agitation - Maintain agitation throughout mixing.
3. Inductor - If an inductor is used, rinse it thoroughly after
each component has been added.
4. Products in PVA bags - Place any product contained
in water-soluble PVA bags into the mixing tank. Wait until
all water-soluble PVA bags have fully dissolved and the
product is evenly mixed in the spray tank before
continuing.
5. Water-soluble additives (including dry and liquid fertil-
izers such as ammonium sulfate or urea ammonium
nitrate)
6. Water-dispersible products (such as dry flowables,
wettable powders, suspension concentrates, or suspo-
emulsions)
5 [Page 31 of 34]

4?y1. Water-soluble products (such as Rezult® B herbicide)
8. Emulsifiable concentrates (such as Poast Plus®
herbicide or crop oil concentrate)
9. Remaining quantity of water
Maintain agitation throughout application until spraying is
complete. Spray Poast Plus + Rezult B within 48 hours
after dispensing into the spray tank,
Tank Mixing Information
Poast Plus + Rezult B may be tank mixed with other reg-
istered herbicides according to the specific tank mixing
instructions in this label and respective product labels.
Read and follow the applicable restrictions and limitations
and directions for use on all product labels involved in tank
mixing. Always follow the most restrictive label use direc-
tions. Refer to the Crop-specific Information section for
tank mixing details.
BASF does not recommend the use of Poast Plus +
Rezult B in tank mixes other than those listed on BASF
labels, supplemental labels, or technical bulletins.
Physical incompatibility, reduced weed control, or crop
injury may result from mixing Poast Plus + Rezult B with
other pesticides (fungicides, herbicides, insecticides, or
miticides), additives, or fertilizers not recommended on the
label.
Additives
To achieve consistent postemergence weed control when
applying the tank mix of Poast Plus + Rezult B, add adju-
vants at the following specified rates:
• 0.5 to 1 pint (maximum) of crop oil concentrate (COG) per
acre plus 1 to 2 quarts (maximum) of urea ammonium
nitrate (UAN) per acre
• Ammonium sulfate (AMS) can be substituted for UAN
(1 pound of AMS equals 1 quart of UAN).
Use Precautions
• DO NOT apply to labeled crops under environmental
stress or damage, fertility excesses, previous herbicide
injury, mechanical injury, or cold temperatures, or crop
injury may result.
• DO NOT apply to weeds under stress (such as stress
because of lack of moisture, previous herbicide injury,
mechanical injury, or cold temperatures) when maximum
daily temperature is below 70° F or soil temperature is
below 60° F, or unsatisfactory control could result.
• DO NOT apply if rainfall or irrigation is expected within
one hour following application.
• DO NOT apply through any type of irrigation system.
• DO NOT cultivate within 5 days before application or
within 7 days after application. Cultivation may put weeds
under stress and reduce control. A timely cultivation
7 days after application may provide season-long weed
control.
Crop-specific Information
This section provides use directions for the tank mix of
Poast Plus + Rezult B in specific crops. Read Product
Information, mixing, application, weeds controlled, and
adjuvant instructions in the preceding sections of the label.
Always read and follow all label directions when using
these products alone, or in a tank mix, or in other tank mix
combinations. The most restrictive labeling applies when
using tank mixes.
L Dry Beans arid Dry Peas
Apply Poast Plus + Rezult B to dry beans after the first
trifoliate leaf has fully expanded and to dry peas after they
have at least three (3) pairs of leaves or four (4) nodes.
DO NOT apply before these growth stages because
severe crop injury may occur.
Dry bean and dry pea injury can be very pronounced. Even
at the tolerant stages, yellowing, bronzing, speckling, or
burning of leaves may occur under certain conditions (refer
to Use Precautions section). This temporary injury is gen-
erally outgrown without delaying podset or maturity, or
reducing yield. Using COG with Poast Plus + Rezult B
may increase injury and may reduce yield.
Tolerant bean and pea types are:
adzuki bean, black turtle soup bean, cranberry bean,
dry lima bean, dry snap bean, great northern bean, kid-
ney bean, navy bean, pink bean, pinto bean, red bean,
white bean, and dry edible peas (field peas).
In western irrigated dry bean areas, it may be necessary to
irrigate before application of Poast Plus + Rezult B to
ensure weeds are actively growing. In this irrigated area,
avoid applying Poast Plus + Rezult B during prolonged
periods of cold weather (day temperature below 75° F and
night temperature below 55° F for 2 to 5 days) because
weed control may be reduced.
Sequential Application
In dry beans and dry peas, an additional 2.9 pints per acre
of Poast Plus or 2.0 pints per acre of Rezult B may be
applied after the initial single tank mix application of
Poast Plus + Rezult B.
Crop-specific Restrictions and Limitations
• After the single tank mix application of Poast Plus +
Rezult B, DO NOT apply more than 2.9 pints per acre of
Poast Plus or 2.0 pints per acre of Rezult B in one
season to dry beans or dry peas.
• DO NOT apply Poast Plus + Rezult B to dry peas
under stress from root rot.
• DO NOT apply Poast Plus + Rezult B to garbanzo
beans or lupins at any stage of growth or severe crop
damage may occur.
• DO NOT apply Poast Plus + Rezult B to dry beans or
dry peas within 30 days of harvest.
6 [Page 32 of 34]

• DO NOT use Poast Plus® herbicide + Rezult® B
herbicide on adzuki beans in California.
Tank Mixtures
The following herbicides may be tank mixed with
Poast Plus + Rezult B:
• Dry beans only - Pursuit® herbicide, Raptor®
herbicide
• Dry peas only - MCPA
fpjffj|l|^
Peppermint and spearmint are tolerant to Poast Plus +
Rezult B; however, some leaf burning may occur under
certain conditions, such as when plants are growing very
actively and have extensive new, succulent tissue. Mint
plants generally outgrow this condition within 10 days.
Sequential Application
In peppermint and spearmint, an additional 3.9 pints per
acre of Poast Plus or 2.0 pints per acre of Rezult B may
be applied after the initial single tank mix application of
Poast Plus + Rezult B.
Crop-specific Restrictions and Limitations
• After the single tank mix application of Poast Plus +
Rezult B, DO NOT apply more than 3.9 pints per acre of
Poast Plus or 2.0 pints per acre of Rezult B in one
season in peppermint or spearmint.
• DO NOT apply Poast Plus + Rezult B to peppermint or
spearmint within 20 days of harvest.
i Soybean
All soybean varieties are tolerant to Poast Plus + Rezult B
at all stages of growth. Leaf speckling may occur, but
plants generally outgrow this condition within 10 days.
Sequential Application
In soybean, an additional 5.9 pints per acre of Poast Plus
or 2.0 pints per acre of Rezult B may be applied after the
initial single tank mix application of Poast Plus +
Rezult B.
Crop-specific Restrictions and Limitations
• After the single tank mix application of Poast Plus +
Rezult B, DO NOT apply more than 5.9 pints per acre of
Poast Plus or 2.0 pints per acre of Rezult B in one
season in soybean.
• DO NOT apply Poast Plus + Rezult B to soybeans
within 75 days of harvest.
• DO NOT graze treated soybean fields.
• DO NOT feed treated soybean forage (green succulent)
or ensilage to livestock.
• DO NOT cut treated soybean fields for hay for at least
30 days after the last treatment of Poast Plus +
Rezult B. Only processed meal from seed or hay may be
fed to animals.
Tank Mixtures
The following herbicides may be tank mixed with
Poast Plus + Rezult B:
• Pursuit
• Raptor
7 [Page 33 of 34]

Conditions of Sale and Warranty
The Directions For Use of this product reflect the
opinion of experts based on field use and tests. The
directions are believed to be reliable and must be
followed carefully. However, it is impossible to eliminate all
risks inherently associated with the use of this product.
Crop injury, ineffectiveness or other unintended
consequences may result because of such factors as
weather conditions, presence of other materials, or use of
the product in a manner inconsistent with its labeling, all
of which are beyond the control of BASF CORPORATION
("BASF") or the Seller. To the extent consistent with
applicable law, all such risks shall be assumed by the
Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably fit for
the purposes referred to in the Directions For Use,
subject to the inherent risks, referred to above..
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER'S EXCLUSIVE REMEDY AND BASF'S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS PRODUCT.
BASF and the Seller offer this product, and the Buyer and
User accept it, subject to the foregoing Conditions of
Sale and Warranty which may be varied only by
agreement in writing signed by a duly authorized
representative of BASF. nos
Poast Plus, Pursuit, Raptor, and Rezult are registered
trademarks of BASF.
© 2014 BASF Corporation
All rights reserved.
007969-00088.20131 OSOd.NVA 2013-04-033-0186
Based on: NVA 2013-04-026-0010
Supersedes: NVA 2009-04-033-0151
BASF Corporation
26 Davis Drive
Research Triangle Park, NC 27709
8 [Page 34 of 34]
BASFThe Chemical Company