crop-chem-docs/corpus/epa_ppls/279-9638.md

# F4278-3

- EPA Reg No: **279-9638**
- Registrant: FMC CORPORATION 
- Signal word: Warning
- Active ingredients: Flutriafol (26.4%)
- Label accepted: 2023-01-24
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000279-09638-20230124.pdf

---
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY 
 WASHINGTON, DC 20460 
OFFICE OF CHEMICAL SAFETY 
AND POLLUTION PREVENTION 
 
Fast Track Label Acceptable v.20220527 
January 24, 2023 
 
Paula Bodey 
Senior Registration Manager 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
Subject: Label Amendment – Updated plant back intervals for several crops, added 
instructions to Storage and Disposal section, and other minor updates. 
 Product Name: F4278-3 
 EPA Registration Number: 279-9638 
 Application Date: March 3, 2022 
 Decision Number: 583434 
 
Dear Paula Bodey: 
 
The amended label referred to above, submitted in connection with registration under the Federal 
Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, is acceptable. This approval 
does not affect any conditions that were previously imposed on this registration. You continue to 
be subject to existing conditions on your registration and any deadlines connected with them. 
 
A stamped copy of your labeling is enclosed for your records. This labeling supersedes all 
previously accepted labeling. You must submit one copy of the final printed labeling before you 
release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), 
you may distribute or sell this product under the previously approved labeling for 18 months 
from the date of this letter. After 18 months, you may only distribute or sell this product if it 
bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is 
defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. 
 
Should you wish to add/retain a reference to the company’s website on your label, then please be 
aware that the website becomes labeling under FIFRA and is subject to review by the Agency. If 
the website is false or misleading, the product would be misbranded and unlawful to sell or 
distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) lists examples of statements 
EPA may consider false or misleading. In addition, regardless of whether a website is referenced 
on your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it is 
brought to our attention that a website contains false or misleading statements or claims 
substantially differing from the EPA approved registration, the website will be referred to the 
EPA’s Office of Enforcement and Compliance.

Page 2 of 2 
EPA Reg. No. 279-9638 
Decision No. 583434 
 
Your release for shipment of the product constitutes acceptance of these conditions. If these 
conditions are not complied with, the registration will be subject to cancellation in accordance 
with FIFRA section 6. 
 
If you have any questions, please contact Stephanie Suarez at 202-566-2918 or at 
Suarez.Stephanie@epa.gov. 
 
 Sincerely, 
 
Nathan Mellor, Product Manager 21 
Fungicide Branch 
Registration Division (7505T) 
Office of Pesticide Programs 
 
 
Enclosure

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 1 
 
 
 
 
 
 
 
FLUTRIAFOL Group 3 Fungicide 
 
 
F4278-3 
 
 
[ABN: Xyway™ 3D Fungicide] 
 
Liquid fungicide for use in a 3RIVE 3D™ application system only. 
 
 
 
ACTIVE INGREDIENT: 
Flutriafol 26.4% 
OTHER INGREDIENTS: 73.6% 
TOTAL: 100.0% 
 
Contains: 2.5 pounds per gallon of the active ingredient flutriafol. 
Suspension Concentrate. 
 
Keep Out of Reach of Children 
WARNING / AVISO 
 
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en 
detalle. 
(If you do not understand the label, find someone to explain it to you in detail.) 
 
IN CASE OF A MEDICAL EMERGENCY INVOLVING THIS PRODUCT, CALL 
TOLL FREE, DAY OR NIGHT, 1-800- 331-3148 
 
 – OR – 
 
For MEDICAL EMERGENCY 
1-800-331-3148 
For SPILLS 
CHEMTREC 
1-800-424-9300 
 
01/24/2023
279-9638

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 2 
Notice: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
 
 
Note to PM, the following bracketed statements are individually optional depending on 
the packaging configuration and whether a booklet label design is used: 
 
a. [See First Aid statement on back [label] [panel] [of booklet]]. 
b. [See additional precautionary statements and Directions for Use in booklet.] 
c. [Read the entire label before using this product.] 
d. [See First Aid, Precautionary Statements, and Directions for Use on individual 
packages.] 
 
 
 
EPA Reg. No. 279-9638 EPA Est. No._______ Net Contents : 
_____ 
 
 
Sold by:
 
FMC Corporation 
2929 Walnut Street 
Philadelphia, PA 19104 
 
 
 
[ placeholder is a registered trademark of FMC]

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 3 
FIRST AID 
 
If in eyes: 
- Hold eye open and rinse slowly and gently with water for 15-20 minutes. 
- Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. 
- Call a poison control center or doctor for treatment advice. 
 
If swallowed: 
- Call a poison control center or doctor immediately for treatment advice. 
- Have person sip a glass of water if able to swallow. 
- DO NOT induce vomiting unless told to by a poison control center or doctor. 
- DO NOT give anything to an unconscious person. 
 
If on skin or clothing: 
- Take off contaminated clothing. 
- Rinse skin immediately with plenty of water for 15-20 minutes. 
- Call a poison control center or doctor for treatment advice. 
 
 
 
Have the product container or label with you when calling a poison control center or 
doctor, or going for treatment. You may also contact 1-800-331-3148 for emergency 
medical treatment information. 
Note to Physician: No specific antidote. Treat symptomatically. 
 
PRECAUTIONARY STATEMENTS 
 
HAZARDS TO HUMANS AND DOMESTIC ANIMALS 
 
Warning. Causes substantial but temporary eye injury. DO NOT get in eyes or on 
clothing. Wear protective eyewear (goggles, face shield, or safety glasses). Harmful if 
swallowed. Avoid contact with skin or clothing. Wash thoroughly with soap and water 
after handling and before eating, drinking, chewing gum, using tobacco, or using the 
toilet. Prolonged or frequently repeated skin contact may cause allergic reactions in 
some individuals. 
 
 
PERSONAL PROTECTIVE EQUIPMENT (PPE) 
Applicators and all other handlers must wear: long-sleeved shirt and long pants, 
chemical-resistant gloves, shoes plus socks, and protective eyewear. 
 
USER SAFETY REQUIREMENTS 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions 
for washables exist, use detergent and hot water. Keep and wash PPE separately from 
other laundry.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 4 
ENGINEERING CONTROLS STATEMENT 
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets 
the requirements listed in the Worker Protection Standard (WPS) for agricultural 
pesticides [40 CFR 170.240(d) (4-6)], the handler PPE requirements may be reduced or 
modified as specified in the WPS. 
 
 
ENVIRONMENTAL HAZARDS 
This formulated product is toxic to fish and aquatic invertebrates. DO NOT apply directly 
to water, or to areas where surface water is present or to intertidal areas below the 
mean high-water mark. DO NOT contaminate water when disposing of equipment 
washwater or rinsate. 
 
Ground Water Advisory: Flutriafol has properties and characteristics associated with 
chemicals detected in ground water. This chemical may leach into ground water if used 
in areas where soils are permeable, particularly where the water table is shallow. 
 
Surface Water Advisory: This product may impact surface water quality due to runoff of 
rain-water. This is especially true for poorly draining soils and soils with shallow ground 
water. This product is classified as having a high potential for reaching surface water 
via runoff for several months or more after application. 
 
DIRECTIONS FOR USE 
 
It is a violation of Federal law to use this product in any manner inconsistent with its 
labeling. DO NOT apply this product in a way that will contact workers or other persons, 
either directly or through drift. Only protected handlers may be in the area during 
application. For any requirements specific to your State or Tribe, consult the agency 
responsible for pesticide regulation. 
 
F4278-3 is a 3RIVE 3D
® formulation designed for use in the 3RIVE 3D® application 
system. The 3RIVE 3D application system is a system that expands mixtures of crop 
protection products and low volumes of water into a three-dimensional foam solution 
delivered to the furrow during planting. 3RIVE 3D® formulations contain agents intended 
to produce foam. Applying 3RIVE 3D® formulations in application systems not designed 
to produce foam will result in uneven application, excessive or insufficient foaming, and 
poor performance. 
 
USER SAFETY RECOMMENDATIONS 
Users should: Remove clothing/PPE immediately if pesticide gets inside. Then 
wash thoroughly and put on clean clothing. Remove PPE immediately after handling 
this product. Wash the outside of gloves before removing. As soon as possible, 
wash thoroughly and change into clean clothing.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 5 
 
[Note to Reviewer: Below is optional state specific language.] 
 
[Optional language for CA: In California, this product may only be applied to 
fields that are not irrigated or are irrigated using pressurized irrigation methods 
such as macro-sprinkler, micro-sprinkler or drip systems.] 
 
[Optional language for NY: Not for sale, distribution, or use in Nassau or Suffolk 
Counties of New York State. 
In New York State this product may not be applied within 100 feet (using ground 
equipment) of coastal marshes or streams that drain into coastal marshes.] 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Workers Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about Personal Protective 
Equipment (PPE) and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
 
DO NOT enter or allow worker entry into treated areas during the restricted entry 
interval (REI) of 12 hours. 
 
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, 
including plants, soil or water, is: coveralls, chemical resistant gloves, and shoes plus 
socks. 
 
STORAGE AND DISPOSAL 
DO NOT contaminate water, food or feed by storage or disposal. 
 
Pesticide Storage: Store unused product in original container in a cool, dry, secure 
area. Before using after storage, agitate the product well, including inverting the 
container or circulating the contents. 
 
Pesticide Disposal: Pesticide wastes may be hazardous. Improper disposal of excess 
pesticide, spray mixture or rinsate is a violation of Federal Law. If these wastes cannot 
be disposed of by use according to label instructions, contact your State Pesticide or 
Environmental Control Agency, or the Hazardous Waste Representative at the nearest 
EPA Regional Office for guidance. 
 
Container Handling: 
Non-refillable Container [in sizes 5 gallons or less]: DO NOT reuse or refill this 
container. Clean container promptly after emptying. Triple rinse as follows: Empty the

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 6 
remaining contents into application equipment or mix tank and drain for 10 seconds 
after flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 
seconds. Pour rinsate into application equipment or mix tank or store rinsate for later 
use or disposal. Drain for 10 seconds after flow begins to drip. Repeat this procedure 
two more times. Then offer for recycling if available or puncture and dispose of in a 
sanitary landfill, or by incineration, or, if allowed by State and local authorities, by 
burning. If burned, stay out of smoke. 
 
Non-refillable Container [in sizes greater than 5 gallons]: DO NOT reuse or refill 
this container. Triple rinse or pressure rinse container promptly after emptying. 
 
Triple rinse as follows: Empty remaining contents into application equipment or a mix 
tank. Fill the container ¼ full with water. Replace and tighten closures. Tip container 
on its side and roll it back and forth, ensuring at least one complete revolution, for 30 
seconds. Stand the container on its end and tip back and forth several times. Turn the 
container over onto its other end and tip back and forth several times. Empty the 
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. 
Repeat this procedure two more times. Then offer for recycling if available or puncture 
and dispose of in a sanitary landfill, or by incineration, or, if allowed by State and local 
authorities, by burning. If burned, stay out of smoke. 
 
Pressure rinse as follows: Empty remaining contents into application equipment or a 
mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold the 
container upside down over application equipment or a mix tank or collect rinsate for 
later use or disposal. Insert pressure rinsing nozzle in the side of the container and 
rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins 
to drip. Then offer for recycling if available or puncture and dispose of in a sanitary 
landfill, or by incineration, or, if allowed by State and local authorities, by burning. If 
burned, stay out of smoke. 
 
Returnable/Refillable Container: DO NOT rinse container. DO NOT empty remaining 
formulated product. DO NOT break seals. Return intact to point of purchase. Refill this 
container with pesticide only. DO NOT reuse this container for any other purpose. 
Cleaning the container before final disposal is the responsibility of the person disposing 
of the container. Cleaning before refilling is the responsibility of the refiller. To clean 
the container before final disposal, empty the remaining contents into application 
equipment or mix tank or rinsate collection system. Fill the container about 10% full 
with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or 
pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times. Then offer for recycling if available or puncture and 
dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local 
authorities, by burning. If burned, stay out of smoke. 
 
Returnable/Non-refillable Container: DO NOT rinse container. DO NOT empty 
remaining formulated product. Return intact to point of purchase. DO NOTreuse this 
container for any other purpose. Cleaning the container before final disposal is the

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 7 
responsibility of the person disposing of the container. To clean the container before 
final disposal, empty the remaining contents into application equipment or mix tank or 
rinsate collection system. Fill the container about 10% full with water. Agitate 
vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into 
application equipment or rinsate collection system. Repeat this rinsing procedure two 
more times. Then offer for recycling if available or puncture and dispose of in a sanitary 
landfill, or by incineration, or, if allowed by state and local authorities, by burning. If 
burned, stay out of smoke. 
 
 
 
PRODUCT DIRECTIONS 
 
READ ENTIRE LABEL. USE STRICTLY IN ACCORDANCE WITH 
PRECAUTIONARY STATEMENTS RESTRICTIONS, AND DIRECTIONS, AND WITH 
APPLICABLE STATE AND FEDERAL REGULATIONS. 
 
Restrictions 
DO NOT use this product as a foliar application. For at-planting application use only on 
labeled crops. 
 
DO NOT apply this product through any type of irrigation system. 
 
DO NOT apply this product by air. 
 
DO NOT mix with any other product unless that product has been specifically designed 
to work with the F4278-3 formulation and the 3RIVE 3D
® application system. 
 
The maximum application rate per acre per year (pounds active ingredient/acre/year) as 
listed under the use directions for each crop must not be exceeded. 
 
Crop Rotation Restrictions: Fields treated with F4278-3 may be planted to the 
following crops and plant back intervals: 
 
Crop Plant back Interval 
 Field corn; field corn grown for seed or 
silage; popcorn; sweet corn; cotton; ; 
Immediately 
Alfalfa, barley, cucurbits; fruiting 
vegetables; grapes; hops; Brassica leafy 
vegetables crop group 5; leafy 
vegetables, except Brassica, crop group 
4; peanut; pome fruit; grain sorghum; rice; 
soybean; stone fruit; strawberry; sugar 
beet; tomato; tree nuts; triticale; or wheat 
 30 days 
All other crops Prohibited

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 8 
Application and Mixing Instructions 
F4278-3 contains 2.5 pounds of flutriafol per gallon. The rate of application is variable 
within the specified rate range according to pest pressure. Use lower specified rates 
under low pest pressure, or when part of a sequential fungicide program and higher 
specified rates under heavier pest pressure. F4278-3 must be applied at planting 
through a 3RIVE 3D® application system that is designed specifically for application of 
this type of formulation. 
Before pumping or moving F4278-3 from the container to the 3RIVE 3D® applicator 
tank, circulate the product in the container to thoroughly mix the product and remove 
any settling of contents that may have occurred. 
 
F4278-3 applied at planting results in foliar disease protection through systemic uptake 
and control or suppression of susceptible pathogens throughout the growing season. 
For protection of diseases not listed on this label or very high infestation environments, , 
supplemental foliar fungicide applications of appropriate products registered for use on 
the same crops and diseases may be needed.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 9 
F4278-3 Row Spacing Conversion Table 
 
Use rates for the individual crop sections are listed as fluid oz/1000 linear feet based on 
30-inch row spacings. For conversion to rates applicable to different row spacings, see 
the table below. 
 
 
F4278-3 Required 
Per Acre for Various Row Spacings (fl oz/A) 
Row Spacing 40” 38” 36” 30” 20” 15” and Twin Row 
30” centers 
 
7.5” 
Lin row ft/A 13,069 13,756 ft 14,520 ft 17,424 ft 26,136 ft 34,848 ft 69,696 
Conversion 
0.17 fl oz/1000 Lin ft = 4.4 5.8 11.8 fl oz/A 
0.24 fl oz/1000 Lin ft = 6.3 8.4 
0.33 fl oz/1000 Lin ft = 4.3 4.5 4.8 5.8 8.6 11.5 
0.38 fl oz/1000 Lin ft = 5.0 5.2 5.5 6.7 9.9 13.3 
0.48 fl oz/1000 Lin ft = 6.3 6.7 7.0 8.4 12.5 16.7 
0.64 fl oz/1000 Lin ft = 8.4 8.8 9.3 11.2 16.7 
0.68 fl oz/1000 Lin ft = 8.9 9.4 9.9 11.8 
0.76 fl oz/1000 Lin ft = 9.9 10.5 11.0 13.3 
 
Resistance Management: 
F4278-3 contains the active ingredient Flutriafol, a FRAC group 3 demethylation 
inhibitor (DMI). 
 
Any fungal population may contain individuals naturally resistant to F4278-3 and 
other Group
 3 fungicides. A gradual or total loss of pest control may occur over time 
if these fungicides are used repeatedly in the same fields. Follow appropriate 
resistance-management strategies. 
 
To delay fungicide resistance, take one or more of the following steps: 
 
• Rotate the use of F4278-3 or other FRAC Group 3 fungicides within a 
growing season with non- FRAC Group 3 fungicides or fungicide 
premixes that control the same target pathogens. 
 
• Use tank mixtures with fungicides from a different FRAC group that are 
equally effective on the target pest when such use is permitted. Use at least 
the minimum application rate as labeled by the manufacturer. 
 
• Adopt an integrated disease management program for fungicide use that 
includes scouting, uses historical information related to pesticide use, and crop 
rotation, and which considers host plant resistance, impact of environmental 
conditions on disease development, disease thresholds, as well as cultural, 
biological and other chemical control practices. 
 
• Where possible, make use of predictive disease models to effectively time 
fungicide applications. Note that using predictive models alone is not sufficient 
to manage resistance.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 10 
 
• Monitor treated fungal populations for resistance development. 
 
• Contact your local extension specialist or certified crop advisor for any 
additional pesticide resistance-management and/or IPM guidelines for specific 
crops and pathogens. 
 
• For further information or to report suspected resistance contact your pesticide 
distributor or university extension specialist. 
 
 
 
CROP USE DIRECTIONS 
Product Information 
F4278-3 is a soil applied fungicide that is absorbed through the roots and is translocated 
through the xylem upward within the plant and is distributed through the roots, stem and 
leaves for foliar disease protection during the growing season. The systemic movement 
of F4278-3 can also aid in reduction of soil disease infection by feeding of insect pests 
including corn rootworm in corn leading to healthier plants. 
F4278-3 soil applications provide disease control/suppression th rough the growing 
season. For control of late -season infestations and/or heavy disease pressure disease 
situations, a supplemental foliar application of an appropriate fungicide may be needed. 
All varieties and cultivars have not been tested with F4278- 3. Local conditions can 
influence crop tolerance and may not match those under which FMC has conducted 
testing. FMC has not tested all possible combinations of other products . Physical 
incompatibility, reduced disease control, or crop response/injury may result from 
applications of F4278- 3 mixed with other products at the same time . Always follow the 
most restrictive label.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 11 
 
Use Directions for Corn (Field, Corn Grown for Grain, Seed, or Silage, Popcorn, 
Sweet Corn) 
 USE RATES 
Diseases Fluid 
oz/acre 
 
Fluid oz/1000 
Linear ft.* 
 
lb ai/A 
Gray Leaf Spot 
(Cercospora zeae-maydis) 
 
Southern Corn Leaf Blight 
(Bipolaris maydis) 
 
Northern Corn Leaf Blight 
(Exserohilum turcicum) 
 
Common Rust 
(Puccinia sorghi) 
 
 
 
 
 
 
SUPPRESSION: 
 
Head Smut 
(Sporisorium reilianum) 
 
 
Anthracnose Stalk Rot 
(Colletotrichum graminicola) 
 
Fusarium Stalk and Crown Rot 
(Fusarium graminearum, 
Fusarium spp.) 
 
Physoderma Brown Spot 
(Physoderma maydis) 
 
5.8 – 11.8 
. 
0.33 – 0.68 
 
 
 
0.114 – 0.228

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 12 
 
*Please refer to row spacing conversion table in application instructions for application 
rates based on various row spacings. . 
Precautions: 
• F4278-3 has not been tested on all hybrids (Field corn, Popcorn, Silage corn and Sweet 
corn). High application use rates combined with sandy soils and/or heavy rainfall or 
irrigation within 3 days of planting may delay emergence. 
 
• In-furrow placement of F4278-3 with direct contact with the seed can result in slow or 
temporarily delay corn emergence. Normal growth and development typically occur with 
favorable growing conditions and heat unit accumulation. 
 
• Conditions that can increase the degree of this response include cold soils, additional 
high-salt content fertilizer applications, compaction and other seedling stresses. Early 
planting into cold, high residue covered soils leading to a long emergence period can 
increase emergence delay. To minimize this response, plant corn when soil 
temperatures are minimum of 50-55° F, with favorable growing conditions in the 
forecast. 
 
Restrictions: 
• DO NOT apply more than 0.228 lb active ingredient per acre (11.8 fl oz of 
product/A) per year including at-plant plus foliar applications of other flutriafol 
products. 
• DO NOT apply more than one application per year.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 13 
 
Use Directions for Cotton 
 USE RATES 
Diseases Fluid 
oz/acre 
 
Fluid oz/1000 
Linear ft.* 
 
lb ai/A 
 
Cotton Root Rot 
(Phymatotrichopsis omnivora) 
 
 
6.7 – 13.3 0.38 – 0.76 
 
0.13 – 0.26 
*Please refer to row spacing conversion table in application instructions for application 
rates based on various row spacings.. 
 
NOTICE 
Heavy rainfall or irrigation within 3 days after planting may delay emergence. 
Sufficient irrigation must be applied to thoroughly wet the F4278-3 treated zone after cotton 
has emerged. 
 
Restrictions: 
• DO NOT apply more than 0.26 lb active ingredient (13.3 fl oz of product)/A as an 
at-plant application. 
• DO NOT apply more than 0.488 lb active ingredient per acre per year including at-
plant plus foliar applications of other flutriafol products. 
• DO NOT apply more than one application per year.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 14 
Use Directions for Grain Sorghum 
 
 USE RATES 
Diseases Fluid 
oz/acre 
Fluid oz/1000 
Linear ft. 
* 
Pound 
ai/acre 
 
 
Gray Leaf Spot 
(Cercospora sorghi) 
 
Leaf Blight 
(Exserohilum turcicum or 
Setosphaeria turcica) 
 
Rust 
(Puccinia purpurea) 
 
 
5.8 – 11.8 0.33 – 0.68 0.114 – 
0.228 
*Please refer to row space conversion chart in application instructions for application 
rates based on various row spacings. other than 30”. 
 
Restrictions: 
• DO NOT apply more than 0.228 lb active ingredient per acre (11.8 fl oz 
product/A) per year including at-plant plus foliar applications of other 
flutriafol products. 
• DO NOT apply more than one application per year.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 15 
Use Directions for Sugar Beet 
 
 USE RATES 
Diseases Fluid 
oz/acre 
 
Fluid oz/1000 
Linear ft. 
* 
Pound 
ai/acre 
Cercospora Leaf Spot 
(Cercospora beticola) 
 
Powdery Mildew 
(Erysiphae polygoni) 
 
5.8 – 11.8 0.33 – 0.68 0.114 – 
0.228 
*Please refer to row space conversion chart in application instructions for application 
rates based on various row spacings. other than 30”. 
 
Restrictions: 
• DO NOT apply more than 0.228 lb active ingredient per acre (11.8 fl oz 
product/A) per year including at-plant plus foliar applications of other flutriafol 
products. 
• DO NOT apply more than one application per year.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 16 
Use Directions for Wheat (Spring and Winter) and Triticale 
 USE RATES 
Diseases Fluid 
oz/acre 
 
Fluid oz/1000 
Linear ft. 
* 
Pound ai/acre 
Rust 
(Puccinia spp.) 
 
Powdery Mildew 
(Blumeria graminis) 
 
 
 
5.8 – 11.8 033 – 0.68 
 
 
0.114 – 0.228 
*Please refer to row spacing conversion table in application instructions for application 
rates based on various row spacings. 
Restrictions: 
• DO NOT apply more than 0.228 lb active ingredient per acre (11.8 fl oz 
product/A) per year including at-plant plus foliar applications of other flutriafol 
products. 
• DO NOT apply more than one application per year.

F4278-3 [Optional text appears in brackets] 
EPA Reg. No. 279-9638 
 
 
 
 17 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
 
Conditions of Sale and Limitation of Warranty and Liability: 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not 
acceptable, return the product at once, unopened, and the purchase price will be 
refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to 
eliminate all risks inherently associated with the use of this product. Crop injury, 
ineffectiveness, or other unintended consequences may result because of such factors 
as manner of use or application, weather or crop conditions beyond the control or FMC 
or Seller. All such risks shall be assumed by Buyer and User, and Buyer and User 
agree to hold FMC and Seller harmless for any claims relating to such factors. 
Seller warrants that this product conforms to the chemical description on the label and is 
reasonably fit for the purposes stated on the Directions for Use when used in 
accordance with the directions under normal conditions of use. To the extent consistent 
with applicable law, FMC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF 
FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHER EXPRESS OR 
IMPLIED WARRANTIES WITH RESPECT TO THE SELECTION, PURCHASE, OR 
USE OF THIS PRODUCT. Any warranties, express or implied, having been made are 
inapplicable if this product has been used contrary to label instructions, or under 
abnormal conditions, or under conditions not reasonably foreseeable to (or beyond the 
control of) Seller or FMC, and Buyer assumes the risk of any such use. 
To the extent consistent with applicable law, FMC or Seller shall not be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF FMC AND 
SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES 
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE 
USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE 
PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF FMC OR 
SELLER, THE REPLACEMENT OF THE PRODUCT. 
This Conditions of Sale and Limitation of Warranty and Liability may not be amended by 
any oral or written agreement. 
 
 
[placeholder are registered trademarks of FMC] 
 
 
 
Label code: D- 4675 012423