1348 lines
67 KiB
Markdown
1348 lines
67 KiB
Markdown
# Tripleflex II Herbicide
|
||
|
||
- **Product class:** herbicide
|
||
- **EPA Reg No:** 524-614
|
||
- **Active ingredients:** Acetochlor, clopyralid, Flumetsulam
|
||
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/tripleflex-ii-herbicide
|
||
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/TripleFlex_II_Herbicide_Bayer_Label2pdf
|
||
|
||
---
|
||
|
||
US62219414B 150727Bv2 09/20
|
||
For Use in Conventional and Herbicide Tolerant Field and Silage
|
||
Corn, including Field Corn Hybrids with Roundup Ready ® 2
|
||
Technology, including Roundup Ready® Corn 2
|
||
Active Ingredients:
|
||
Acetochlor: 2-chloro-2’-methyl-6’-ethyl-N-ethoxymethylacetanilide......................41.67%
|
||
Flumetsulam: N-(2,6-difluorophenyl)-5-methyl-1,2,4-triazolo-[1,5a]-
|
||
pyrimidine-2-sulfonamide ........................................................................................1.3%
|
||
Clopyralid: 3,6-dichloro-2-pyridine carboxylic acid, monoethanolamine salt ..........4.27%
|
||
Other Ingredients: ................................................................................................. 52.76%
|
||
Total .......................................................................................................................100.00%
|
||
Acid equivalent: clopyralid: 3,6-dichloro-2-pyridinecarboxylic acid – 3.24% (0.29 lb/gal)
|
||
Contains 3.75 lb acetochlor, 0.38 lb clopyralid monoethanolamine salt, and 0.12 lb
|
||
flumetsulam active ingredient per gallon
|
||
EPA Reg. No. 524-614
|
||
Keep out of reach of children.
|
||
WARNING! AVISO
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
|
||
(If you do not understand the label, find someone to explain it to you in detail.)
|
||
Please refer to booklet for additional precautionary statements and directions for use.
|
||
COMPLETE DIRECTIONS FOR USE
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
|
||
Suffolk Counties of New York State.
|
||
RECIRCULATE OR MIX TO ENSURE UNIFORM DISPERSION
|
||
BEFORE TRANSFER FROM CONTAINER.
|
||
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL-FREE,
|
||
1-866-99BAYER (1-866-992-2937)
|
||
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
|
||
ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
|
||
Produced for:
|
||
Bayer CropScience LP
|
||
800 N. Lindbergh Blvd.
|
||
St. Louis, MO 63167 USA
|
||
©2020 Bayer Group. All rigths resevered.
|
||
HERBICIDE
|
||
6.875”
|
||
7.125”
|
||
6.875”
|
||
6.625”
|
||
COPY AREA
|
||
COPY AREA
|
||
US62219414B (150727Bv2) TripleFLEX II MINI BULK ECL
|
||
(Label Coordinator: Jacob Ziegler)
|
||
|
||
Read the entire label before using this product.
|
||
Use only according to label instructions.
|
||
Read “LIMIT OF WARRANTY AND LIABILITY” at end of the label
|
||
before buying or using. If terms are not acceptable, return at once
|
||
unopened.
|
||
THIS IS AN END-USE PRODUCT. BAYER CROPSCIENCE LP DOES NOT
|
||
INTEND AND HAS NOT REGISTERED IT FOR REFORMULATION. IT IS
|
||
INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A
|
||
BAYER CROPSCIENCE LP REPACKAGING OR TOLL REPACKAGING
|
||
AGREEMENT.
|
||
IMPORTANT PHONE NUMBERS
|
||
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN
|
||
USING THIS PRODUCT, CALL TOLL-FREE,
|
||
1-866-99BAYER (1-866-992-2937)
|
||
2. IN CASE OF AN EMERGENCY INVOLVING THIS
|
||
HERBICIDE PRODUCT, OR FOR MEDICAL ASSISTANCE,
|
||
CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
|
||
PRECAUTIONARY STATEMENTS
|
||
Hazards to Humans and Domestic Animals
|
||
Keep Out of Reach of Children.
|
||
WARNING! AVISO
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la
|
||
explique a usted en detalle. (If you do not understand the label, find
|
||
someone to explain it to you in detail.)
|
||
CAUSES SUBSTANTIAL BUT TEMPORARY EYE INJURY.
|
||
HARMFUL IF ABSORBED THROUGH SKIN.
|
||
HARMFUL IF SWALLOWED.
|
||
Do not get in eyes or on clothing. Avoid contact with skin. Wear
|
||
protective eyewear (goggles, face shield, or safety glasses). Wash
|
||
thoroughly with soap and water after handling and before eating,
|
||
drinking, chewing gum, using tobacco or using the toilet. Remove
|
||
and wash contaminated clothing before reuse.
|
||
Prolonged or Frequently Repeated Skin Contact May Cause Allergic
|
||
Reactions in Some Individuals
|
||
FIRST AID
|
||
IF IN EYES • Hold eye open and rinse slowly and gently with
|
||
water for 15-20 minutes.
|
||
• Remove contact lenses, if present, after the first
|
||
5 minutes, then continue rinsing eye.
|
||
• Call a poison control center or doctor for
|
||
treatment advice
|
||
IF ON
|
||
SKIN OR
|
||
CLOTHING
|
||
• Take off contaminated clothing.
|
||
• Rinse skin immediately with plenty of water for
|
||
15-20 minutes.
|
||
• Sensitized persons should avoid further contact
|
||
and reuse of contaminated clothing.
|
||
• Call a poison control center or doctor for
|
||
treatment advice
|
||
IF
|
||
SWALLOWED
|
||
• Call a poison control center or doctor
|
||
immediately for treatment advice.
|
||
• Have person sip a glass of water if able to
|
||
swallow.
|
||
• Do not induce vomiting unless told to do so by a
|
||
poison control center or doctor.
|
||
• Do not give anything by mouth to an unconscious
|
||
person.
|
||
• Have the product container or label with you when calling a
|
||
poison control center or doctor, or going for treatment.
|
||
• You may also contact 1-800-334-7577, collect, day or night, for
|
||
emergency medical treatment information.
|
||
• This product is identified as TripleFLEX II Herbicide, EPA
|
||
Registration No. 524-614
|
||
• Note to Physician: Probable mucosal damage may
|
||
contraindicate use of gastric lavage.
|
||
Personal Protective Equipment (PPE):
|
||
Some of the materials that are chemical-resistant to this product
|
||
are listed below. If you want more options, follow the instructions for
|
||
category F or G on an EPA chemical-resistance category selection
|
||
chart.
|
||
Applicators and other handlers must wear: Long-sleeved shirt
|
||
and long pants, socks, shoes, chemical-resistant gloves made of
|
||
barrier laminate, and protective eyewear (goggles, face shield, or
|
||
safety glasses).
|
||
Discard clothing and other absorbent materials that have been
|
||
drenched or heavily contaminated with this product’s concentrate.
|
||
Do not reuse them. Follow manufacturer’s instructions for
|
||
cleaning/maintaining PPE. If no such instructions for washables
|
||
exist, use detergent and hot water. Keep and wash PPE separately
|
||
from other laundry.
|
||
Engineering Controls: When handlers use closed systems, or
|
||
enclosed cabs in a manner that meets the requirements listed in
|
||
the Worker Protection Standard (WPS) for agricultural pesticides
|
||
[40 CFR 170.240(d)(4-5)], the handler PPE requirements may be
|
||
reduced or modified as specified in the WPS.
|
||
User Safety Recommendations:
|
||
Users should:
|
||
• Wash hands before eating, drinking, chewing gum, using
|
||
tobacco or using the toilet.
|
||
• Remove clothing/PPE immediately if pesticide gets inside. Then
|
||
wash thoroughly and put on clean clothing.
|
||
• Remove PPE immediately after handling this product. Wash the
|
||
outside of gloves before removing.
|
||
• As soon as possible, wash thoroughly and change into clean
|
||
clothing.
|
||
ENVIRONMENTAL HAZARDS
|
||
This product is toxic to fish. Do not apply directly to water, or to
|
||
areas where surface water is present or to intertidal areas below the
|
||
mean high water mark. Do not contaminate water when disposing
|
||
of equipment wash water.
|
||
Acetochlor demonstrates the properties and characteristics
|
||
associated with chemicals detected in ground water. The use of this
|
||
chemical in areas where soils are permeable, particularly where the
|
||
ground water is shallow, may result in ground water contamination.
|
||
Flumetsulam and clopyralid are known to leach through soil into
|
||
ground water under certain conditions as a result of agricultural use.
|
||
Use of this product where soils are permeable, particularly where
|
||
the water table is shallow may result in leaching to ground water.
|
||
Caution should be exercised when handling this product at mixing
|
||
and loading sites to prevent contamination of groundwater supplies.
|
||
Use of closed systems for mixing or transferring this pesticide will
|
||
reduce the probability of spills. Placement of the mixing/loading
|
||
equipment on an impervious pad to contain spills will help prevent
|
||
groundwater contamination.
|
||
Acetochlor has properties that may result in surface water
|
||
contamination via dissolved runoff and runoff erosion. Practices
|
||
should be followed to minimize the potential for dissolved runoff
|
||
and/or runoff erosion.
|
||
DIRECTIONS FOR USE
|
||
It is a violation of Federal law to use this product in any manner
|
||
inconsistent with its labeling. This product can only be used in
|
||
accordance with the Directions for Use on this label or in separately
|
||
published Bayer CropScience LP Supplemental labeling.
|
||
Do not apply this product in a way that will contact workers or other
|
||
persons, either directly or through drift. Only protected handlers may
|
||
be in the area during application. For any requirements specific to
|
||
your State or Tribe, consult the agency responsible for pesticide
|
||
regulation.
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk
|
||
Counties of New York State.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
1
|
||
|
||
Agricultural Use Requirements
|
||
Use this product only in accordance with its labeling and with
|
||
the Worker Protection Standard, 40 CFR Part 170. This Standard
|
||
contains requirements for the protection of agricultural workers
|
||
on farms, forests, nurseries, and greenhouses, and handlers of
|
||
agricultural pesticides. It contains requirements for training,
|
||
decontamination, notification and emergency assistance. It also
|
||
contains specific instructions and exceptions pertaining to the
|
||
statements on this label about personal protective equipment
|
||
(PPE) and restricted-entry interval. The requirements in this box
|
||
only apply to uses of this product that are covered by the Worker
|
||
Protection Standard.
|
||
Do not enter or allow worker entry into treated areas during
|
||
the restricted entry interval (REI) of 12 hours. Exception: if the
|
||
product is soil-injected or soil-incorporated, the Worker Protection
|
||
Standard, under certain circumstances, allows workers to enter
|
||
the treated area if there will be no contact with anything that
|
||
has been treated.
|
||
PPE required for early entry to treated areas that is permitted
|
||
under the Worker Protection Standard and that involves contact
|
||
with anything that has been treated, such as plants, soil, or water,
|
||
are: coveralls, chemical-resistant gloves made of barrier laminate,
|
||
chemical-resistant footwear plus socks, and protective eyewear.
|
||
STORAGE AND DISPOSAL
|
||
Do not allow this product to contaminate water, foodstuffs, feed
|
||
or seed by storage or disposal.
|
||
PESTICIDE STORAGE: Store pesticides away from food, pet food,
|
||
feed, seed, fertilizers, and veterinary supplies. Keep container
|
||
closed to prevent spills and contamination.
|
||
PESTICIDE DISPOSAL: To avoid wastes, use all material in
|
||
this container, including rinsate, by application in accordance
|
||
with label directions. If wastes cannot be avoided, offer
|
||
remaining product to a waste disposal facility or pesticide
|
||
disposal program. Such programs are often run by state or
|
||
local governments or by industry. All disposal must be in
|
||
accordance with applicable federal, state and local regulations
|
||
and procedures.
|
||
CONTAINER HANDLING AND DISPOSAL: Refillable container.
|
||
Refill this container with pesticide only. Do not reuse this
|
||
container for any other purpose. Cleaning this container
|
||
before refilling is the responsibility of the refiller. Cleaning
|
||
this container before final disposal is the responsibility of
|
||
the person disposing of the container. To clean this container
|
||
before final disposal, empty the remaining contents from this
|
||
container into application equipment or a tank mix. Fill the
|
||
container about 10 percent full with water. Agitate vigorously
|
||
or recirculate water with the pump for 2 minutes. Pour or pump
|
||
rinsate into application equipment or rinsate collection system.
|
||
Repeat this rinsing procedure two more times. Then offer this
|
||
container for recycling, if available. To obtain information about
|
||
recycling refillable containers, contact Bayer CropScience LP at
|
||
1-866-99BAYER (1-866-992-2937).
|
||
PRODUCT INFORMATION
|
||
TripleFLEX II Herbicide is a unique combination of the herbicides
|
||
acetochlor, flumetsulam, and clopyralid that control weeds by
|
||
interfering with normal germination and seedling development.
|
||
TripleFLEX II Herbicide is designed for use on conventional and
|
||
herbicide tolerant field corn and silage corn, such as Liberty Link®
|
||
field and silage corn, and including Corn with Roundup Ready
|
||
2 Technology including Roundup Ready Corn 2. It may be applied
|
||
to the soil surface or incorporated into the top 1-2 inches of soil. It
|
||
is specified for use alone or in tank mix combinations for control or
|
||
partial control of grasses and broadleaf weeds listed in the “WEEDS
|
||
CONTROLLED” section of this label. TripleFLEX II Herbicide may
|
||
provide postemergence activity on susceptible broadleaf weeds up
|
||
to 2 inches tall that are present at application but will not provide
|
||
postemergence activity on emerged grass weeds. If grass and
|
||
broadleaf weeds are present at the time of application, best results
|
||
will be achieved by tank mixing a herbicide such as a Roundup
|
||
agricultural herbicide, dicamba or 2,4-D.
|
||
Use Restrictions
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk
|
||
Counties of New York State.
|
||
On the following soil types, do not apply this product within 50 feet
|
||
of any well where the depth to ground water is 30 feet or less: sands
|
||
with less than 3 percent organic matter; loamy sands with less than
|
||
2 percent organic matter; or sandy loams with less than 1 percent
|
||
organic matter. See the figure for additional clarification.
|
||
Chemigation: Do not apply this product through any type of
|
||
irrigation system.
|
||
Do not use flood irrigation to apply or incorporate this product.
|
||
Do not apply this product using aerial application equipment.
|
||
This product may not be mixed or loaded within 50 feet of any
|
||
wells (including abandoned wells and drainage wells), sink
|
||
holes, perennial or intermittent streams and rivers, and natural or
|
||
impounded lakes and reservoirs. This setback does not apply to
|
||
properly capped or plugged abandoned wells and does not apply to
|
||
impervious pad or properly diked mixing/loading areas.
|
||
Operations that involve mixing, loading, rinsing, or washing of this
|
||
product into or from pesticide handling or application equipment
|
||
or containers within 50 feet of any well are prohibited unless
|
||
conducted on an impervious pad constructed to withstand the
|
||
weight of the heaviest load that may be positioned on or moved
|
||
across the pad. Such a pad shall be designed and maintained
|
||
to contain any product spills or equipment leaks, container or
|
||
equipment rinse or washwater, and rainwater that may fall on pad.
|
||
Surface water shall not be allowed to either flow over or from the
|
||
pad, which means the pad must be self-contained. The pad shall
|
||
be sloped to facilitate material removal. An unroofed pad shall
|
||
be of sufficient capacity to contain a minimum of 110 percent
|
||
of the capacity of the largest pesticide container or application
|
||
equipment on the pad. A pad that is covered by a roof of sufficient
|
||
size to completely exclude precipitation from contact with the
|
||
pad shall have a minimum containment capacity of 100 percent
|
||
of the capacity of the largest pesticide container or application
|
||
equipment on the pad. Containment capacities as described above
|
||
shall be maintained at all times. The above specified minimum
|
||
containment capacities do not apply to vehicles when delivering
|
||
pesticide shipments to the mixing/loading site. States may have in
|
||
effect additional requirements regarding wellhead setbacks and
|
||
operational containment.
|
||
Product must be used in a manner which will prevent back
|
||
siphoning into wells, spills or improper disposal of excess pesticide,
|
||
spray mixtures or rinsates.
|
||
Do not apply under conditions which favor runoff or wind erosion of
|
||
soil containing this product to non-target areas. To prevent off-site
|
||
movement due to runoff or wind erosion:
|
||
Avoid treating powdery dry or light sandy soils when conditions
|
||
are favorable for wind erosion. Under these conditions, the soil
|
||
surface should first be settled by rainfall or irrigation.
|
||
Do not apply to impervious substrates such as paved or highly
|
||
compacted surfaces or frozen or snow covered soils.
|
||
Do not use tailwater from the first flood or furrow irrigation of
|
||
treated fields to treat non-target crops unless at least 1/2 inch of
|
||
rainfall has occurred between application and the first irrigation.
|
||
Do not apply when wind conditions favor drift to non-target sites. To
|
||
minimize spray drift to non-target areas:
|
||
Use low-pressure application equipment capable of producing a
|
||
large droplet spray. Do not use nozzles that produce a fine droplet
|
||
spray. Minimize drift by using sufficient spray volume to ensure
|
||
adequate coverage with large droplet size sprays.
|
||
Keep ground driven spray boom as low as possible above the
|
||
target surface.
|
||
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
2
|
||
|
||
Make application when the wind velocity favors on-target product
|
||
deposition (approximately 3 to 10 miles per hour). Do not apply
|
||
when wind velocity exceeds 15 miles per hour. Avoid application
|
||
when gusts approach 15 miles per hour.
|
||
Low humidity and high temperatures increase the likelihood of
|
||
spray drift to sensitive areas. Avoid spraying during conditions
|
||
of low humidity and/or high temperatures. Do not apply during
|
||
inversion conditions.
|
||
Do not use liquid fertilizers as the carrier for applications of
|
||
TripleFLEX II Herbicide after the crop has emerged or crop injury
|
||
may occur.
|
||
Uneven application or uneven incorporation of TripleFLEX II
|
||
Herbicide can result in erratic weed control or crop injury. Over
|
||
application may result in crop injury or rotational crop damage from
|
||
soil residue.
|
||
Maximum Application Rates: The total cumulative maximum
|
||
application amount of TripleFLEX II Herbicide on corn is 3.5 pints
|
||
per acre per crop year.
|
||
Do not exceed 3.0 pints per acre in a single application.
|
||
Use of this product not consistent with this label may result in injury
|
||
to persons, animals or crops, or other unintended consequences.
|
||
Restrictions and Precautions for Soil Application (Not Applicable to
|
||
Postemergence Application)
|
||
Corn Planting Depth: Plant at a minimum depth of at least
|
||
1½ inches.
|
||
Do not apply to areas where the soil pH is greater than 7.8 as this
|
||
may result in increased crop injury.
|
||
Do not apply to a soil containing greater than 5% organic matter if
|
||
the soil pH is below 5.9, as reduced weed control will result.
|
||
Use of TripleFLEX II Herbicide in soil-applied treatments on soils with
|
||
less than 1.5% organic matter (O.M.) may result in crop injury. Apply
|
||
as a soil-treatment to fields which have less than 1.5% O.M. only if
|
||
the risk of crop injury is acceptable.
|
||
If any herbicide with ALS (acetolactate synthase) inhibition mode of
|
||
action was applied the previous year, apply TripleFLEX II Herbicide
|
||
to corn only if the rotational restrictions applicable to corn for the
|
||
preceding product has been met.
|
||
Adverse Weather Conditions
|
||
Extended cold, wet conditions (soil temperatures below 50ºF and
|
||
excessive rainfall with wet soil conditions), following application
|
||
of this product to herbicide tolerant corn, which persist during
|
||
germination and/or early crop development may result in crop
|
||
injury. Injury symptoms, which include yellowing of leaves
|
||
and/or crop stunting, are usually temporary and affected corn plants
|
||
usually recover without affecting yield.
|
||
Dry weather following preplant surface or preemergence
|
||
applications of TripleFLEX II Herbicide may reduce effectiveness. If
|
||
sufficient activating rainfall or overhead irrigation does not occur
|
||
within 7 to 10 days of application, rotary hoe, harrow, or shallowly
|
||
cultivate to incorporate the herbicide lightly into the soil. Use a
|
||
preplant incorporated application when a period of dry weather is
|
||
predicted after application.
|
||
Low humidity and high temperatures increase the likelihood of
|
||
spray drift to sensitive areas. Avoid spraying during conditions of
|
||
low humidity and/or high temperatures. Do not apply during air
|
||
temperature inversion conditions.
|
||
Soil Insecticide Advisories for Soil Applications of TripleFLEX II
|
||
Herbicide
|
||
Soil-applied organophosphate insecticides (except terbufos or
|
||
phorate, see below) should only be applied in a T-band or a band to
|
||
avoid potential crop injury.
|
||
Do not use terbufos (Counter) or phorate (Thimet) insecticides.
|
||
Soil insecticides from other classes of chemistry may be applied
|
||
in-furrow, T-banded, or banded.
|
||
Soil Insecticide Advisories for Postemergence Applications of
|
||
TripleFLEX II Herbicide
|
||
Do not apply TripleFLEX II Herbicide postemergence if corn was
|
||
previously treated with terbufos (Counter) or phorate (Thimet)
|
||
insecticides, as severe crop injury may result.
|
||
Postemergence applications of TripleFLEX II Herbicide to corn
|
||
previously treated with T-band, band, or in-furrow applications of
|
||
other organophosphate insecticides such as Lorsban ®, Aztec, or
|
||
Fortress insecticides may cause temporary crop injury.
|
||
Foliar Insecticide Advisories for Postemergence Applications of
|
||
TripleFLEX II Herbicide
|
||
Do not tank mix this product with foliar postemergence
|
||
organophosphate insecticides as severe crop injury may result.
|
||
To avoid crop injury, apply the foliar organophosphate insecticide
|
||
treatment at least 10 days before or 10 days after the application of
|
||
TripleFLEX II Herbicide.
|
||
TripleFLEX II Herbicide may be tank mixed with non-
|
||
organophosphate foliar insecticides, provided they are labeled for
|
||
use with postemergence corn herbicides.
|
||
Other Precautions and Restrictions
|
||
Do not apply TripleFLEX II Herbicide to sweet corn or popcorn.
|
||
Hybrid Seed Production: Corn inbred lines grown for hybrid seed
|
||
production may be injured by TripleFLEX II Herbicide. Inbred lines
|
||
should be thoroughly tested for crop tolerance before treating large
|
||
acreage. While growers are not prohibited from using TripleFLEX II
|
||
Herbicide on seed corn, it is not recommended.
|
||
Preharvest interval: An interval of at least 85 days is required
|
||
between application of TripleFLEX II Herbicide and field corn
|
||
harvested for grain.
|
||
Avoid all direct or indirect contact with non-target plants. Do not
|
||
apply near desirable vegetation. Allow adequate distance between
|
||
target area and desirable plants under conditions of application to
|
||
minimize potential exposure.
|
||
Crop Residues from Treated Areas: Crop residues from treated
|
||
areas cannot be used for composting or mulching on ground
|
||
where susceptible crops may be grown the following season. To
|
||
promote herbicide decomposition, plant material should be evenly
|
||
incorporated or burned. Adequate moisture is also required to
|
||
promote breakdown of plant residues, which contain clopyralid.
|
||
Do not move treated soil. Avoid situations where soil particles may
|
||
blow into areas where susceptible crops are grown. The hazard of
|
||
movement of this product on dust is reduced if treated fields are
|
||
irrigated or if rain occurs shortly after application.
|
||
Do not apply under conditions that favor runoff or wind erosion
|
||
of soil containing TripleFLEX II Herbicide to non-target areas. To
|
||
prevent off-site movement due to runoff or wind erosion:
|
||
• Avoid treating powdery dry or light sandy soils when conditions
|
||
are favorable for wind erosion. Under these conditions, the soil
|
||
surface should first be wetted by rainfall or irrigation.
|
||
• Do not apply to impervious substrates such as paved or highly
|
||
compacted surfaces or frozen or snow covered ground.
|
||
• Do not apply to soils when saturated with water.
|
||
• Do not apply when weather conditions favor drift to
|
||
non-target sites. Spray drift of TripleFLEX II Herbicide to
|
||
emerged soybeans or other sensitive crops or soil to which
|
||
soybeans or other sensitive crops will be planted during the
|
||
same growing season may cause crop injury.
|
||
Sprayer Cleanup
|
||
To avoid injury to or exposure of non-target crops, thoroughly clean
|
||
and drain spray equipment used to apply TripleFLEX II Herbicide after
|
||
use. Cleaning should occur as soon as possible after application of
|
||
TripleFLEX II Herbicide. Spray equipment should be cleaned after
|
||
use with TripleFLEX II Herbicide by the following procedure:
|
||
1. Drain any remaining TripleFLEX II Herbicide from the spray tank
|
||
and dispose of according to label disposal instructions.
|
||
2. Hose down the interior surfaces of the tank. Flush tank, hoses,
|
||
boom, and nozzles with clean water for 10 minutes. Fill the
|
||
tank with water and re-circulate for 15 minutes. Spray part of
|
||
the mixture through the hoses, boom, and nozzles and drain the
|
||
tank. All rinse water must be disposed of in compliance with
|
||
local, state, and federal guidelines.
|
||
3. Fill the tank with water and re-circulate for 15 minutes. For
|
||
optimum cleaning, a tank cleaner such as liquid ammonia
|
||
(1 gallon per 100 gallons of water) or other commercial tank
|
||
cleaner is recommended in the second rinse if the spray
|
||
equipment will be used on crops other than field corn. Spray
|
||
part of the mixture through the hoses, boom, and nozzles
|
||
and drain the tank. All rinse water must be disposed of in
|
||
compliance with local, state, and federal guidelines.
|
||
4. Remove the nozzles and screens and clean separately.
|
||
5. If the spray equipment will be used on crops other than field
|
||
corn, repeat steps 1 and 2 again and thoroughly wash the spray
|
||
mixture from the outside of spray tank and the boom.
|
||
ROTATIONAL CROPS
|
||
When tank mixing with other herbicides, follow the most restrictive
|
||
crop rotation guidelines on the label of each product used. The
|
||
following rotational crops may be planted as indicated:
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
3
|
||
|
||
Rotational Crop (1) Timing or Interval
|
||
corn Anytime - 0 months after application
|
||
wheat 4 months after application
|
||
alfalfa (2), barley, clover
|
||
(2), dry beans (2, 3),
|
||
lespedeza (2), oats, pea
|
||
(4), popcorn, rye, soybean
|
||
(2), vetch (2), wild rice
|
||
Spring Following Application
|
||
sorghum 12 months
|
||
potatoes, sunflower,
|
||
sweet corn (5), tobacco 18 months
|
||
canola, sugar Beets, and
|
||
all other crops 26 months (6)
|
||
Numbers within parentheses (-) in the table refer to Specific
|
||
Rotational Crop Requirements below:
|
||
(1) If crop treated with TripleFLEX II Herbicide is lost, corn may be
|
||
replanted immediately. Do not make a second application of
|
||
TripleFLEX II Herbicide.
|
||
(2) When annual rainfall and/or irrigation is less than 15 inches on
|
||
soils with less than 2% organic matter, this crop should not be
|
||
planted until 18 months after treatment.
|
||
(3) Dry beans include: adzuki, kidney, lima (dry), navy, and pinto.
|
||
(4) Pea includes: blackeyed, chick, cow, Crowder, field, pigeon, and
|
||
Southern.
|
||
(5) Certain sweet corn varieties may be planted 10.5 months
|
||
following application. Please refer to the separate TripleFLEX II
|
||
Herbicide Product Bulletin for a list of these varieties.
|
||
(6) Rotation to canola, sugar beets, and all other crops requires a
|
||
26-month rotation interval and a successful field bioassay.
|
||
Field Bioassay Instructions: In fields previously treated with
|
||
this product, plant short test rows of the intended rotational crop
|
||
across the original direction of application in a manner to sample
|
||
field conditions such as soil texture, soil pH, drainage, and any
|
||
other variable that could affect the seed bed of the new crop. Field
|
||
bioassay at any time between harvest of the treated crop and the
|
||
planting of the rotational crop. Observe the test crop for herbicidal
|
||
activity, such as poor stand (effect on seed germination) chlorosis
|
||
(yellowing), and necrosis (dead leaves or shoots), or stunting
|
||
(reduced growth). If herbicidal symptoms do not occur, the test crop
|
||
can be grown. If there is apparent herbicidal activity, do not plant
|
||
the field to the test rotational crop; plant only a labeled crop or crop
|
||
listed in the table above for which the rotational interval has clearly
|
||
been met.
|
||
WEED RESISTANCE MANAGEMENT
|
||
This product contains acetochlor, a Group 15 herbicide,
|
||
flumetsulam, a Group 2 herbicide, and clopyralid, a Group
|
||
4 herbicide. Any weed population can contain plants naturally
|
||
resistant to Group 15, 2, or 4 herbicides. Weed species resistant to
|
||
Group 15, 2, or 4 herbicides may be effectively managed utilizing
|
||
another herbicide from a different Group, or by using other cultural
|
||
or mechanical practices.
|
||
General Principles of Herbicide Resistance Management
|
||
1. Apply integrated weed management practices. Use multiple
|
||
herbicide modes-of-action with overlapping weed spectrums in
|
||
rotation, sequences, or mixtures.
|
||
2. Use the full recommended herbicide rate and proper application
|
||
timing for the hardest to control weed species present in the
|
||
field.
|
||
3. Scout fields after herbicide application to ensure control has
|
||
been achieved. Avoid allowing weeds to reproduce by seed or to
|
||
proliferate vegetatively.
|
||
4. Monitor site and clean equipment between sites.
|
||
For annual cropping situations also consider the following:
|
||
• Start with a clean field and control weeds early by using
|
||
a burndown treatment or tillage in combination with a
|
||
preemergence residual herbicide as appropriate.
|
||
• Use cultural practices such as cultivation and crop rotation,
|
||
where appropriate.
|
||
• Use good agronomic principles that enhance crop
|
||
competitiveness.
|
||
• Use new commercial seed that is as free of weed seed as
|
||
possible.
|
||
Report any incidence of repeated non-performance of this product
|
||
on a particular weed to your Bayer CropScience LP representative,
|
||
local retailer, or county extension agent.
|
||
SOIL TEXTURE
|
||
Applicators should evaluate soil conditions carefully to assure that
|
||
they choose the correct label rate.
|
||
The use rates of this product and the other herbicides labeled for
|
||
use in tank mixtures with this product vary with soil texture. Unless
|
||
soil texture is specifically named, rate tables throughout this label
|
||
refer to only three soil textural groups: coarse, medium and fine.
|
||
The following is a complete listing of soil textures included in each
|
||
of these three soil textural groups:
|
||
SOIL TEXTURAL
|
||
GROUP SOIL TEXTURE
|
||
COARSE sand, loamy sand, sandy loam
|
||
MEDIUM loam, silt loam, silt, sandy clay loam
|
||
FINE silty clay loam, clay loam, sandy clay, silty
|
||
clay, clay
|
||
Refer to the above table to determine the corresponding soil textural
|
||
group for the soil to be treated.
|
||
MIXING, SPRAYING AND HANDLING INSTRUCTIONS
|
||
NOTE: Direct contact or exposure to this product or spray mixtures
|
||
of this product should be minimized. The following instructions for
|
||
transfer, mixing, cleaning or repairing equipment should be followed
|
||
in order to minimize this exposure. Review the protective clothing
|
||
requirements as listed in the “PRECAUTIONARY STATEMENTS”
|
||
section of this label and do not use this product until you have the
|
||
necessary protective clothing.
|
||
Bulk Containers
|
||
Open pouring from these containers can result in exposure from
|
||
splashing or spilling, and is not recommended. This product should
|
||
be transferred from these containers to the mix or spray tank using
|
||
pumps or transfer probes. The probe or pump should not be removed
|
||
from the container or disconnected until the container is emptied and
|
||
rinsed. Use the pump or probe system to rinse the empty container
|
||
and transfer the rinsate directly to the mix or spray tank.
|
||
Equipment Cleaning & Repair
|
||
Cleaning and repair of transfer systems and application equipment
|
||
is a source of exposure to this product. Care should be taken to
|
||
minimize exposure during cleaning and repair of transfer systems
|
||
and application equipment. Whenever possible, these systems or
|
||
equipment should be rinsed before being cleaned or repaired.
|
||
When repairs must be made during transfer or application, the
|
||
equipment should be shut down, and special care taken to avoid
|
||
contact with the pesticide.
|
||
Sprayer Compatibility
|
||
Always predetermine the compatibility of this product or labeled
|
||
mixtures of this product with water carrier or sprayable fluid
|
||
fertilizer carrier by mixing small proportional quantities in advance.
|
||
See the “Standard Sprayable Fluid Fertilizer Compatibility Test”
|
||
section in this label to determine the compatibility of this product
|
||
and the labeled tank mixtures specified for use with sprayable
|
||
fluid fertilizer carrier. Do not use liquid fertilizers as the carrier for
|
||
applications of TripleFLEX II Herbicide after the crop has emerged
|
||
or crop injury may occur.
|
||
Mix this product or labeled tank mixture of this product with the
|
||
appropriate carrier as follows:
|
||
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
|
||
2. Through the screen, fill the sprayer tank one-half full with
|
||
appropriate carrier.
|
||
3. If a compatibility agent is necessary to improve mixing or to
|
||
prevent the formation of undesirable and unsprayable gels or
|
||
precipitates, while agitating add it to the carrier already in the
|
||
tank. Use only compatibility agents cleared by FDA for this use.
|
||
Read and follow all directions for use, cautionary statements and
|
||
all other information appearing on the selected compatibility
|
||
agent label. Check for adequate agitation.
|
||
4. If a wettable powder or dry flowable formulation is used, make
|
||
slurry with water, and add it slowly through the screen into the
|
||
tank. Continue agitation.
|
||
5. If a flowable formation is used, add slowly through screen into
|
||
the tank. Mixing and compatibility may be improved when
|
||
flowable is premixed one part flowable with one part water and
|
||
added slowly to the tank in diluted form.
|
||
6. Add this product slowly through the screen into the tank.
|
||
Mixing and compatibility may be improved when this product
|
||
is prediluted with two parts of water and added to the tank in
|
||
diluted form.
|
||
7. Complete filling the sprayer tank with carrier. If a Roundup ®
|
||
agricultural herbicide or a Gramoxone brand herbicide is used,
|
||
add the required amount near the end of the filling process.
|
||
Remove hose from tank immediately after filling to avoid
|
||
siphoning back into the water source.
|
||
Maintain good agitation at all times until the contents of the tank
|
||
are sprayed.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
4
|
||
|
||
NOTE: If spray mixture is allowed to settle at any time, thorough
|
||
agitation is required to re-suspend the mixture before spraying is
|
||
resumed.
|
||
Keep by-pass line on or near bottom of tank to minimize foaming.
|
||
Screen size in nozzle or line strainers should be 50-mesh. Carefully
|
||
select proper nozzle to avoid spraying a fine mist. Check for even
|
||
distribution of spray droplets. To reduce loss of the chemical due to
|
||
drift of a fine mist, apply at nozzle pressures below 40 psi.
|
||
Standard Sprayable Fluid Fertilizer Compatibility Test
|
||
Herbicides may not always mix evenly throughout a sprayable
|
||
fluid fertilizer or the components may separate too quickly to
|
||
make their combined use of practical value. This may be due to
|
||
certain characteristics of the different fluid fertilizers. A simple test
|
||
using small quantities of the components is suggested to provide
|
||
compatibility potential. The test follows:
|
||
A. Materials Required For A Compatibility Test
|
||
1. Two one-quart jars with lid or stopper (marked “with” and
|
||
“without”).
|
||
2. TEAspoons (for a more exacting test, a five to ten milliliter (mL)
|
||
pipette or graduated cylinder is desirable).
|
||
3. Sprayable fluid fertilizer to be tested.
|
||
4. The herbicide chemicals to be mixed.
|
||
5. A compatibility agent (the purpose of the adjuvant is to help
|
||
keep the fertilizer and crop protection chemical in suspension,
|
||
if this assistance is needed).
|
||
B. Procedure
|
||
1. Add one pint of the sprayable fluid fertilizer that will be used or
|
||
other herbicide carrier to each jar marked “with” and “without”.
|
||
Add One Pint Liquid Fertilizer
|
||
To Two Quart Jars.
|
||
2. To the jar marked “with”, add 1/4 TEAspoon or 1.2 milliliters of a
|
||
suitable compatibility agent; shake gently for five to ten seconds
|
||
to mix. (1/4 TEAspoon in one pint is the equivalent of two pints
|
||
per 100 gallons of liquid fertilizer.)
|
||
To Jar Marked “WITH”
|
||
Add Compatibility Agent
|
||
And Shake to Mix
|
||
3. To each jar add the appropriate amount of herbicide(s). If
|
||
more than one is used, add them separately with the wettable
|
||
powders or dry flowables added first, flowables second and
|
||
liquid last. Shake gently five to ten seconds after each addition.
|
||
Add Herbicide(s) To Both Jars
|
||
And Shake to Mix
|
||
Amount to be Added per
|
||
Pint of Sprayable Fluid
|
||
Fertilizer (Assuming
|
||
Volume is 25 gallons/Acre)
|
||
HERBICIDE RATE/ACRE Level TEAspoons
|
||
Wettable 1 pound = 1.5
|
||
Powders 2 pounds = 3.0
|
||
or 3 pounds = 4.5
|
||
Dry Flowables 4 pounds = 6.0
|
||
5 pounds = 7.5
|
||
HERBICIDE RATE/ACRE
|
||
Level
|
||
TEAspoons MILLILITERS
|
||
Emulsifiable 1 pint = 0.5 or 2.4
|
||
Concentrates or 1 quart = 1.0 or 4.7
|
||
Flowables or 2 quarts = 2.0 or 9.5
|
||
Liquids or 3 quarts = 3.0 or 14.2
|
||
Solutions 1 gallon = 4.0 or 19.0
|
||
5 quarts = 5.0 or 23.8
|
||
This compatibility test is designed for 25 gallons of spray per
|
||
acre with the maximum labeled rate of herbicide. For changes in
|
||
spray volume or herbicide rate, make appropriate changes in the
|
||
ingredients of the test. Regardless of spray volume, the amount
|
||
of compatibility agent should be equal to two or three pints
|
||
(two pints = 1/4 TEAspoon or 1.2 milliliters, three pints = 3/8 TEAspoon or
|
||
1.8 milliliters per pint of sprayable fluid fertilizer) per 100 gallons
|
||
of liquid fertilizer.
|
||
C. Observations and Decisions
|
||
1. If the herbicide(s) and the sprayable fluid fertilizer are compatible.
|
||
2. If a compatibility agent is necessary.
|
||
Five minutes after the final addition and mixing, observe both jars
|
||
for the formation of large flakes, sludge, gels or other precipitates.
|
||
Observe if the herbicide(s) cannot be physically mixed with the
|
||
liquid fertilizer but remains as small oily particles in the solution.
|
||
If incompatibility in any form described above occurs in the jar
|
||
“with” the compatibility agent added, the liquid fertilizer and the
|
||
herbicide(s) should not be used together in the same spray tank.
|
||
If incompatibility as described above occurs in the jar “without” the
|
||
adjuvant but not in the jar “with” adjuvant, the use of a compatibility
|
||
adjuvant is recommended.
|
||
Both jars should be allowed to stand and be observed periodically
|
||
for one-half hour. If the separate layers of liquid fertilizer and
|
||
additives can be resuspended by shaking, commercial application
|
||
is possible. An emulsifiable concentrate normally will go to the top
|
||
after standing; wettable powders will either settle to the bottom
|
||
of the tank or jar, or float to the top, depending upon the density
|
||
of the fertilizers.
|
||
If the herbicide(s) is compatible with fluid fertilizer in the foregoing
|
||
test without having to use a compatibility agent, fluid fertilizer
|
||
may be used for the premixing. If it is not compatible without the
|
||
compatibility agent, the herbicide(s) should be premixed with water
|
||
before adding to the spray tank.
|
||
APPLICATION SYSTEMS
|
||
Ground Broadcast Treatment
|
||
Apply this product and the labeled tank mixtures in 10 or more
|
||
gallons of solution per acre using broadcast boom equipment. The
|
||
carrier may be either water or sprayable fluid fertilizer as specified
|
||
in the “DIRECTIONS FOR USE” section of this label. Do not apply
|
||
during periods of gusty winds, when winds are in excess of 15 miles
|
||
per hour or when other conditions favoring drift exist.
|
||
Ground Band Treatment
|
||
Apply a broadcast equivalent rate and volume per acre. To determine
|
||
these:
|
||
Band width
|
||
in inches X
|
||
Broadcast
|
||
RATE
|
||
per acre
|
||
= Band RATE
|
||
per acreRow width
|
||
in inches
|
||
Band width
|
||
in inches X
|
||
Broadcast
|
||
VOLUME
|
||
per acre
|
||
= Band VOLUME
|
||
per acreRow width
|
||
in inches
|
||
Application With Dry Bulk Fertilizer
|
||
The herbicide-fertilizer impregnation process must be completed
|
||
only by commercial fertilizer or chemical dealerships properly
|
||
equipped for this procedure. Dry bulk fertilizer may be impregnated
|
||
with this product or the tank mixtures of this product. Follow
|
||
all directions for use and precautions on the respective tank
|
||
mix product labels regarding use rates, soil texture, application
|
||
methods, and rotational restrictions. This product and these tank
|
||
mixtures must be applied with a minimum of 200 pounds of dry
|
||
bulk fertilizer per acre and shallowly incorporated within 14 days
|
||
prior to planting. On medium- and fine-textured soils in areas where
|
||
soil incorporation is not planned, i.e., reduced tillage situations or
|
||
in some conventional tillage situations, applications can be made
|
||
up to 30 days before planting to allow moisture to move the
|
||
herbicide-fertilizer mixture into the soil. On coarse-textured soils,
|
||
applications can be made up to 14 days prior to planting. The
|
||
herbicide must be applied as specified in this label for the crop,
|
||
weed and soil type treated. Refer to the table for broadcast rate
|
||
per acre to determine the application rate per acre for the herbicide
|
||
treatment to be applied.
|
||
The following table provides a reference to determine the amount of
|
||
TripleFLEX II Herbicide to be mixed per ton of dry bulk fertilizer for
|
||
a range of herbicide recommendations for fertilizer rates per acre:
|
||
Fertilizer
|
||
Rate
|
||
Acres
|
||
Covered
|
||
Pints of TripleFLEX II Herbicide /
|
||
Ton Dry Bulk Fertilizer
|
||
1.5
|
||
(pints)
|
||
1.75
|
||
(pints)
|
||
2.0
|
||
(pints)
|
||
2.5
|
||
(pints)
|
||
2.75
|
||
(pints)
|
||
3.0
|
||
(pints)
|
||
(pounds/
|
||
acre) (per ton) Pints Herbicide/Ton Fertilizer
|
||
200 10 15 17.5 20 25 27.5 30
|
||
300 6.7 10 11.7 13.4 16.8 18.4 20.1
|
||
400 5 7.5 8.8 10 12.5 13.8 15
|
||
500 4 6 7 8 10 11 12
|
||
600 3.3 5 5.8 6.6 8.3 9.1 9.9
|
||
700 2.9 4.4 5.1 5.8 7.3 8 8.7
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
5
|
||
|
||
To determine the amount of this product needed for rates not
|
||
included in the preceding table, use the following formula:
|
||
Pints TripleFLEX II Herbicide/Acre X
|
||
2000 Pounds Fertilizer/Acre =
|
||
Pints of TripleFLEX II
|
||
Herbicide per Ton of
|
||
Dry Bulk Fertilizer
|
||
Mix and blend the dry fertilizer and herbicide mixture in a closed
|
||
rotary drum-type mixture allowing sufficient time to ensure uniform
|
||
coverage. Use at least one ton of dry fertilizer per mixing operation.
|
||
Inject the herbicide into the drum over a minimum of a 2-minute
|
||
period and allow at least 2 additional minutes mixing time to ensure
|
||
uniformity. The nozzle used to spray the herbicide treatment must
|
||
be placed inside the mixer to provide uniform spray coverage of the
|
||
tumbling fertilizer. TripleFLEX II Herbicide may also be impregnated
|
||
on dry bulk fertilizer in the field while the fertilizer is being spread
|
||
using a pneumatic applicator equipped to impregnate herbicides.
|
||
If the dry fertilizer used has inadequate absorptive capacity, use a
|
||
higher absorptive material such as Agsorb or Micro-Cel, to provide
|
||
a free-flowing mixture.
|
||
The following table provides a partial list of approved dry fertilizers
|
||
which may be impregnated with this product or tank mixtures of this
|
||
product with other herbicides.
|
||
FERTILIZER (N-P-K)
|
||
Ammonium sulfate (21-0-0)
|
||
Ammonium phosphate-sulfate (16-20-0)
|
||
Diammonium phosphate (18-46-0)
|
||
Monoammonium phosphate (11-56-0)
|
||
Potassium chloride (0-0-60)
|
||
Potassium sulfate (0-0-52)
|
||
Urea (46-0-0)*
|
||
*Some ureas may be phytotoxic when applied on corn. Use only
|
||
ureas known to be safe to corn.
|
||
NOTE: DO NOT impregnate this product or tank mixtures of this
|
||
product with other herbicides on fertilizers containing ammonium
|
||
nitrate, potassium nitrate or sodium nitrate.
|
||
Precaution: To avoid potential for explosion, do not impregnate
|
||
TripleFLEX II Herbicide on ammonium sorbate nitrate, potassium
|
||
nitrate, or sodium nitrate fertilizer or fertilizer blends. Do not
|
||
impregnate on a single (0-20-0) or triple (0-46-0) super phosphate.
|
||
Do not attempt to impregnate TripleFLEX II Herbicide on agricultural
|
||
limestone as the herbicide will not be adequately absorbed.
|
||
Spread the herbicide-dry fertilizer mixture uniformly with a properly
|
||
calibrated applicator: dribble, pneumatic (air flow) or spin. When
|
||
using spin applicators, fertilizers impregnated with this product
|
||
or tank mixtures of this product with other herbicides must be
|
||
spread at half-rate and overlapped 100 percent to obtain full rate
|
||
and uniform distribution. Non-uniform spreading of the fertilizer-
|
||
herbicide mixture may result in unsatisfactory weed control or crop
|
||
injury.
|
||
APPLICATION TIMING, METHODS, AND RATES
|
||
TripleFLEX II Herbicide may be used in conventional, reduced and
|
||
no-till systems and may be applied early preplant, preplant and
|
||
preemergence, and postemergence in conventional field corn, silage
|
||
corn, and corn containing Roundup Ready® 2 Technology including
|
||
Roundup Ready Corn 2, until the corn reaches 11 inches in height.
|
||
Preplant and preemergence applications of TripleFLEX II Herbicide
|
||
should occur as close as possible to planting and prior to weed
|
||
emergence for optimum weed control.
|
||
Postemergence applications may be made from prior to weed
|
||
emergence up to 1 to 2 inch weeds. If weeds are present at the
|
||
time of application, apply this product in a tank mixture with a
|
||
product labeled to control emerged weeds. Observe directions for
|
||
use, precautions and restrictions on the label of the tank mixture
|
||
product. During the planting operation, be careful not to move
|
||
untreated soil to the surface or move treated soil out of the row, as
|
||
weed control may be reduced.
|
||
Fall and Spring Early Preplant Surface Application
|
||
TripleFLEX II herbicide may be applied in the fall or early spring at
|
||
2.0-3.0 pints per acre.
|
||
Fall Applications
|
||
Following soybean harvest, apply to soybean stubble after October
|
||
15, when the sustained soil temperature at 4-inch depth is less than
|
||
50 degrees F , but before ground freezes. Use on medium and fine
|
||
textured soils with greater than 2.5% organic matter. Only corn may
|
||
be planted the following spring. Ground may be tilled before or after
|
||
application. Do not exceed 2-inch incorporation depth if tilled after
|
||
application. If a spring application is made, the total rate of the fall
|
||
plus spring application of TripleFLEX II Herbicide must not exceed
|
||
3.5 pints per acre.
|
||
Spring Early Preplant Applications
|
||
On medium and fine textured soils TripleFLEX II Herbicide may be applied
|
||
21 or more days prior to planting. If the application is made less than
|
||
21 days prior to planting, please refer to the use rate table below
|
||
for specific product rate.
|
||
Preplant Incorporation Application
|
||
TripleFLEX II Herbicide may be mixed into the top 2 inches of
|
||
the soil using shallow incorporation equipment any time within
|
||
14 days prior to planting. Apply the specified treatment rate to
|
||
the soil surface as a broadcast application. Equipment should be
|
||
operated at manufacturer’s designed speed for incorporation to
|
||
ensure adequate mixing and distribution of the herbicide treatment
|
||
in the soil. Equipment design including any drag attachments must
|
||
be adequate to avoid soil ridging which may result in streaked or
|
||
reduced weed control. Soil conditions, including moisture content
|
||
and crop residue levels, must be suitable to allow thorough and
|
||
uniform mixing. Do not mix TripleFLEX II Herbicide deeper than
|
||
2 inches into the soil and avoid moving or shaping soil after
|
||
incorporation.
|
||
Preemergence Surface Application
|
||
TripleFLEX II Herbicide and may be applied to the soil surface after
|
||
planting and prior to either crop or weed emergence. Precipitation
|
||
or overhead sprinkler irrigation of at least 0.25 inch is required
|
||
after application to move the herbicide treatment into the weed
|
||
germination zone. If rain or sprinkler irrigation does not occur
|
||
within 7 days after application, rotary hoe or shallowly cultivate
|
||
immediately to improve performance. High intensity or excessive
|
||
rainfall or excessive irrigation after application may reduce control.
|
||
Incorporation equipment should be run at a shallow depth to avoid
|
||
disturbance of germinating corn seed. Erratic weed control resulting
|
||
from exposure of untreated soil may occur if surface soil is moved
|
||
or reshaped after incorporation.
|
||
Postemergence Surface Application
|
||
TripleFLEX II Herbicide may be applied postemergence until corn reaches
|
||
11 inches in height. Application may be made prior to or after weed
|
||
seedling emergence. If weeds are emerged at application, apply a
|
||
labeled postemergence herbicide with this product to control the
|
||
emerged weeds. Read and follow all restrictions and directions on
|
||
all product labels.
|
||
TripleFLEX II Herbicide will provide limited activity on emerged
|
||
susceptible broadleaf weeds up to 2 inches tall but will not control
|
||
emerged grass weeds present at application listed in the Weeds
|
||
Controlled section of this label. If grass and broadleaf weeds have
|
||
emerged, best results will be achieved by tank mixing a Roundup
|
||
agricultural brand product labeled for control of emerged weeds.
|
||
TripleFLEX II Herbicide will provide soil residual control of the grass
|
||
and broadleaf weeds listed in the Weeds Controlled section of this
|
||
label.
|
||
Sprinkler Irrigation: Do not apply TripleFLEX II Herbicide by
|
||
sprinkler irrigation. Use a sprinkler system only to incorporate
|
||
TripleFLEX II Herbicide after application. After TripleFLEX II Herbicide
|
||
has been applied, a sprinkler irrigation system set to deliver
|
||
0.25 to 0.75 inch of water per acre may be used to incorporate the
|
||
product. Using more than 0.75 inch of water could result in reduced
|
||
performance. On sandy soil low in organic matter, use no more than
|
||
0.5 inch of water. Do not use flood irrigation to apply or incorporate
|
||
TripleFLEX II Herbicide.
|
||
Cultivation Information
|
||
Delay cultivation after application for as long as possible unless
|
||
weeds or grasses emerge. Shallowly cultivate or rotary hoe
|
||
immediately if weeds or grasses emerge. If cultivation is necessary
|
||
because of soil crusting or compaction, set equipment shallow and
|
||
minimize lateral soil movement to avoid dilution or displacement of
|
||
the herbicide treatment. If a band application is used and weeds
|
||
have emerged in the treated band, set cultivator to throw soil into
|
||
the row covering the band.
|
||
Application Rates for TripleFLEX II Herbicide in Conventional and
|
||
Herbicide Tolerant Field Corn and Silage Corn
|
||
TripleFLEX II Herbicide may be used in conventional, reduced
|
||
and no-till systems. Optimal weed control will be obtained when
|
||
applications are made as close as possible to planting corn but
|
||
before weeds emerge. However, applications may be made from
|
||
30 days prior to planting through 11-inch tall corn.
|
||
In reduced or no-till systems, it is recommended that
|
||
a burndown herbicide, such as a Roundup agricultural
|
||
herbicide, dicamba, or 2,4-D be tank mixed with TripleFLEX
|
||
II Herbicide if emerged weeds are present at application.
|
||
TripleFLEX II Herbicide may be used at rates from 1.5 to
|
||
3.0 pints per acre. Use rates in the higher end of the rate range for
|
||
soil type, for longer residual activity. Apply 2.0-3.0 pints per acre in
|
||
fall or spring early preplant applications.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
6
|
||
|
||
BROADCAST RATE PER ACRE*
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
Less than 3% Organic
|
||
Matter (pints/acre)
|
||
3% or More Organic
|
||
Matter (pints/acre)
|
||
Coarse 1.5 to 2.0 1.5 to 2.0
|
||
Medium 1.5 to 2.5 1.75 to 3.0
|
||
Fine 2.0 to 3.0 2.0 to 3.0
|
||
* Use the higher rate in the range for areas of heavy weed
|
||
infestation.
|
||
Do not exceed 3.0 pints per acre in a single application.
|
||
Do not exceed a total cumulative maximum of 3.5 pints per acre
|
||
per year.
|
||
Allow a minimum of 85 days between application of TripleFLEX II
|
||
Herbicide and harvest of field corn for grain.
|
||
Application Rates for TripleFLEX II Herbicide plus Roundup
|
||
Agricultural Herbicides on Corn containing Roundup Ready ®
|
||
2 Technology including Roundup Ready Corn 2
|
||
This program may be used preemergence and postemergence to
|
||
corn containing Roundup Ready 2 Technology including Roundup
|
||
Ready Corn 2 from seedling emergence until the corn reaches
|
||
11 inches in height. Refer to the Roundup agricultural herbicide
|
||
labels for specific weeds controlled postemergence.
|
||
AVOID DRIFT. EXTREME CARE MUST BE USED WHEN APPLYING THIS
|
||
TANK-MIX TO PREVENT INJURY TO DESIRABLE PLANTS AND CROPS
|
||
WHICH DO NOT CONTAIN A GLYPHOSATE TOLERANCE GENE.
|
||
Preemergence Surface Application
|
||
This product may be applied preemergence to corn containing
|
||
Roundup Ready 2 Technology including Roundup Ready Corn 2, at
|
||
1.5 to 3.0 pints per acre.
|
||
Postemergence Surface Application
|
||
This product may be applied postemergence to corn containing
|
||
Roundup Ready 2 Technology including Roundup Ready Corn 2 from
|
||
seedling emergence until the corn is 11 inches in height. A tank
|
||
mixture with a Roundup agricultural herbicide should be applied
|
||
when weeds are 2 to 4 inches in height and before the weed height
|
||
and/or density become competitive with the crop.
|
||
BROADCAST RATE PER ACRE*
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
Less than 3% Organic
|
||
Matter (pints/acre)
|
||
3% or More Organic
|
||
Matter (pints/acre)
|
||
Coarse 1.5 to 2.0 1.5 to 2.0
|
||
Medium 1.5 to 2.5 1.75 to 3.0
|
||
Fine 2.0 to 3.0 2.0 to 3.0
|
||
*Use the higher rate in the range for areas of heavy weed infestation.
|
||
Do not exceed 3.0 pints per acre in a single application.
|
||
Do not exceed a total cumulative maximum of 3.5 pints per acre
|
||
per year.
|
||
Allow a minimum of 85 days between application of TripleFLEX II
|
||
Herbicide and harvest of field corn for grain.
|
||
WEEDS CONTROLLED
|
||
When applied as directed under conditions described,
|
||
TripleFLEX II Herbicide this product will control or partially control the
|
||
weeds listed. Partially controlled weeds will exhibit reduced height, vigor,
|
||
and/or population density.
|
||
Weeds Controlled or Partially Controlled
|
||
Grasses and Sedges Broadleaves
|
||
barnyardgrass amaranth, Palmer ragweed,
|
||
common
|
||
crabgrass species beggarweed,
|
||
Florida ragweed, giant
|
||
crowfootgrass buckwheat, wild shepherd’s purse
|
||
cupgrass, prairie carpetweed sicklepod
|
||
cupgrass,
|
||
southwestern
|
||
chickweed,
|
||
common sida, prickly
|
||
cupgrass, woolly clover, red smartweed,
|
||
Pennsylvania
|
||
foxtail, bristly cocklebur, common spurge, nodding
|
||
foxtail, giant galinsoga spurge, prostrate
|
||
foxtail, green henbit spurge, spotted
|
||
foxtail, robust (purple,
|
||
white)
|
||
horseweed
|
||
(marestail)
|
||
sunflower,
|
||
common
|
||
foxtail, yellow jimsonweed thistle, Canada(1)
|
||
goosegrass kochia velvetleaf
|
||
johnsongrass,
|
||
seedling ladysthumb waterhemp
|
||
species
|
||
millet, foxtail lambsquarters,
|
||
common
|
||
wormwood,
|
||
biennial
|
||
millet, wild proso mallow, Venice
|
||
nutsedge , yellow morningglory,
|
||
ivyleaf
|
||
panicum, browntop morningglory, tall
|
||
panicum, fall mustard, wild
|
||
panicum, Texas nightshade species
|
||
rice, red pigweed, redroot
|
||
sandbur, field pigweed, smooth
|
||
shattercane poinsettia, wild
|
||
signalgrass, broadleaf puncturevine
|
||
sprangletop, red purslane, common
|
||
witchgrass pusley, Florida
|
||
LIMIT OF WARRANTY AND LIABILITY
|
||
This Company warrants that this product conforms to the chemical
|
||
description on the label and is reasonably fit for the purposes set
|
||
forth in the Complete Directions for Use label booklet (“Directions”)
|
||
when used in accordance with those Directions under the conditions
|
||
described therein. TO THE EXTENT CONSISTENT WITH APPLICABLE
|
||
LAW, NO OTHER EXPRESS WARRANTY OR IMPLIED WARRANTY OF
|
||
FITNESS FOR PARTICULAR PURPOSE OR MERCHANTABILITY IS
|
||
MADE. This warranty is also subject to the conditions and limitations
|
||
stated herein.
|
||
To the extent consistent with applicable law, buyer and all users
|
||
shall promptly notify this Company of any claims whether based in
|
||
contract, negligence, strict liability, other tort or otherwise.
|
||
Buyer and all users are responsible for all loss or damage from use
|
||
or handling which results from conditions beyond the control of this
|
||
Company to the extent consistent with applicable law, including,
|
||
but not limited to, incompatibility with products other than those set
|
||
forth in the Directions, unusual weather, weather conditions which
|
||
are outside the range considered normal at the application site and
|
||
for the time period when the product is applied, as well as weather
|
||
conditions which are outside the application ranges set forth in the
|
||
Directions, application in any manner not explicitly set forth in the
|
||
Directions, moisture conditions outside the moisture range specified
|
||
in the Directions, or the presence of products other than those set
|
||
forth in the Directions in or on the soil, crop or treated vegetation.
|
||
This Company does not warrant any product reformulated or
|
||
repackaged from this product except in accordance with this
|
||
Company’s stewardship requirements and with express written
|
||
permission from this Company.
|
||
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE
|
||
EXCLUSIVE REMEDY OF THE USER OR BUYER, AND THE LIMIT OF
|
||
THE LIABILITY OF THIS COMPANY OR ANY OTHER SELLER FOR ANY
|
||
AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE
|
||
USE OR HANDLING OF THIS PRODUCT (INCLUDING CLAIMS BASED
|
||
IN CONTRACT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR
|
||
OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER
|
||
OR BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED , OR,
|
||
AT THE ELECTION OF THIS COMPANY OR ANY OTHER SELLER,
|
||
THE REPLACEMENT OF SUCH QUANTITY, OR, IF NOT ACQUIRED BY
|
||
PURCHASE, REPLACEMENT OF SUCH QUANTITY. TO THE EXTENT
|
||
CONSISTENT WITH APPLICABLE LAW, IN NO EVENT SHALL THIS
|
||
COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY INCIDENTAL,
|
||
CONSEQUENTIAL OR SPECIAL DAMAGES.
|
||
Buyer and all users are deemed to have accepted the terms of this
|
||
LIMIT OF WARRANTY AND LIABILITY which may not be varied by any
|
||
verbal or written agreement.
|
||
Roundup®, Roundup Ready ®, and TripleFLEX ® are registered
|
||
trademarks of Bayer Group. All other trademarks are the property
|
||
of their respective owners.
|
||
©2020 Bayer Group. All rigths resevered.
|
||
EPA Reg. No. 524-614
|
||
In case of an emergency involving this product,
|
||
Call Collect, day or night, 1-800-334-7577.
|
||
Produced for:
|
||
BAYER CROPSCIENCE LP
|
||
800 N. LINDBERGH BLVD.
|
||
ST. LOUIS, MISSOURI 63167 USA
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
7
|
||
|
||
EPA Est. US62219414B 150727Bv2 09/20
|
||
NET CONTENTS
|
||
GAL
|
||
RECIRCULATE OR MIX TO ENSURE UNIFORM DISPERSION BEFORE
|
||
TRANSFER FROM CONTAINER
|
||
THIS IS AN END-USE PRODUCT. BAYER CROPSCIENCE LP DOES NOT INTEND AND HAS NOT REGISTERED
|
||
IT FOR REFORMULATION. IT IS INTENDED THAT REPACKAGING BE ONLY IN ACCORDANCE WITH A
|
||
BAYER CROPSCIENCE LP REPACKAGING OR TOLL REPACKAGING AGREEMENT.
|
||
Active Ingredients:
|
||
Acetochlor: 2-chloro-2’-methyl-6’-ethyl-N-ethoxymethylacetanilide ...................................41.67%
|
||
Flumetsulam: N-(2,6-difluorophenyl)-5-methyl-1,2,4-triazolo-[1,5a]-
|
||
pyrimidine-2-sulfonamide ......................................................................................................1.3%
|
||
Clopyralid: 3,6-dichloro-2-pyridine carboxylic acid, monoethanolamine salt........................4.27%
|
||
Other Ingredients: ............................................................................................................... 52.76%
|
||
Total......................................................................................................................................100.00%
|
||
Acid equivalent: clopyralid: 3,6-dichloro-2-pyridinecarboxylic acid – 3.24% (0.29 lb/gal)
|
||
Contains 3.75 lb acetochlor, 0.38 lb clopyralid monoethanolamine salt, and 0.12 lb flumetsulam
|
||
active ingredient per gallon
|
||
EPA Reg. No. 524-614
|
||
Keep out of reach of children.
|
||
WARNING! AVISO
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
|
||
(If you do not understand the label, find someone to explain it to you in detail.)
|
||
Please refer to booklet for additional precautionary statements and directions for use.
|
||
PRECAUTIONARY STATEMENTS
|
||
HAZARDS TO HUMANS AND DOMESTIC ANIMALS. CAUSES SUBSTANTIAL BUT TEMPORARY EYE
|
||
INJURY. HARMFUL IF ABSORBED THROUGH SKIN. HARMFUL IF SWALLOWED. Do not get in eyes
|
||
or on clothing. Avoid contact with skin. Wear protective eyewear (goggles, face shield, or safety
|
||
glasses). Wash thoroughly with soap and water after handling and before eating, drinking, chewing
|
||
gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.
|
||
Prolonged or Frequently Repeated Skin Contact May Cause Allergic Reactions in Some Individuals.
|
||
FIRST AID
|
||
IF IN EYES • Hold eye open and rinse slowly and gently with water for 15-20 minutes.
|
||
• Remove contact lenses, if present, after the first 5 minutes, then continue rinsing
|
||
eye.
|
||
• Call a poison control center or doctor for treatment advice
|
||
IF ON SKIN
|
||
OR CLOTHING
|
||
• Take off contaminated clothing.
|
||
• Rinse skin immediately with plenty of water for 15-20 minutes.
|
||
• Sensitized persons should avoid further contact and reuse of contaminated
|
||
clothing.
|
||
• Call a poison control center or doctor for treatment advice
|
||
IF
|
||
SWALLOWED
|
||
• Call a poison control center or doctor immediately for treatment advice.
|
||
• Have person sip a glass of water if able to swallow.
|
||
• Do not induce vomiting unless told to do so by a poison control center or doctor.
|
||
• Do not give anything by mouth to an unconscious person.
|
||
• Have the product container or label with you when calling a poison control center or doctor, or
|
||
going for treatment.
|
||
• You may also contact 1-800-334-7577, collect, day or night, for emergency medical treatment
|
||
information.
|
||
• This product is identified as TripleFLEX II Herbicide, EPA Registration No. 524-614
|
||
• Note to Physician: Probable mucosal damage may contraindicate use of gastric lavage.
|
||
Personal Protective Equipment (PPE):
|
||
Some of the materials that are chemical-resistant to this product are listed below. If you want
|
||
more options, follow the instructions for category F or G on an EPA chemical-resistance category
|
||
selection chart.
|
||
Applicators and other handlers must wear: Long-sleeved shirt and long pants, socks, shoes,
|
||
chemical-resistant gloves made of barrier laminate, and protective eyewear (goggles, face shield,
|
||
or safety glasses).
|
||
Discard clothing and other absorbent materials that have been drenched or heavily contaminated
|
||
with this product’s concentrate. Do not reuse them. Follow manufacturer’s instructions for cleaning/
|
||
maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and
|
||
wash PPE separately from other laundry.
|
||
Engineering Controls: When handlers use closed systems, or enclosed cabs in a manner that meets
|
||
the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR
|
||
170.240(d)(4-5)], the handler PPE requirements may be reduced or modified as specified in the WPS.
|
||
User Safety Recommendations:
|
||
Users should:
|
||
• Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
|
||
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put
|
||
on clean clothing.
|
||
• Remove PPE immediately after handling this product. Wash the outside of gloves before
|
||
removing.
|
||
• As soon as possible, wash thoroughly and change into clean clothing.
|
||
ENVIRONMENTAL HAZARDS
|
||
This product is toxic to fish. Do not apply directly to water, or to areas where surface water is
|
||
present or to intertidal areas below the mean high water mark. Do not contaminate water when
|
||
disposing of equipment wash water.
|
||
Acetochlor demonstrates the properties and characteristics associated with chemicals detected in
|
||
ground water. The use of this chemical in areas where soils are permeable, particularly where the
|
||
ground water is shallow, may result in ground water contamination.
|
||
Flumetsulam and clopyralid are known to leach through soil into ground water under certain
|
||
conditions as a result of agricultural use. Use of this product where soils are permeable, particularly
|
||
where the water table is shallow may result in leaching to ground water.
|
||
Caution should be exercised when handling this product at mixing and loading sites to prevent
|
||
contamination of groundwater supplies. Use of closed systems for mixing or transferring this
|
||
pesticide will reduce the probability of spills. Placement of the mixing/loading equipment on an
|
||
impervious pad to contain spills will help prevent groundwater contamination.
|
||
Acetochlor has properties that may result in surface water contamination via dissolved runoff and
|
||
runoff erosion. Practices should be followed to minimize the potential for dissolved runoff and/or
|
||
runoff erosion.
|
||
DIRECTIONS FOR USE
|
||
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State.
|
||
Agricultural Use Requirements
|
||
Use this product only in accordance with its labeling and with the Worker Protection Standard,
|
||
40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers
|
||
on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains
|
||
requirements for training, decontamination, notification and emergency assistance. It also
|
||
contains specific instructions and exceptions pertaining to the statements on this label about
|
||
personal protective equipment (PPE) and restricted-entry interval. The requirements in this box
|
||
only apply to uses of this product that are covered by the Worker Protection Standard.
|
||
Do not enter or allow worker entry into treated areas during the restricted entry interval (REI)
|
||
of 12 hours. Exception: if the product is soil-injected or soil-incorporated, the Worker Protection
|
||
Standard, under certain circumstances, allows workers to enter the treated area if there will be
|
||
no contact with anything that has been treated.
|
||
PPE required for early entry to treated areas that is permitted under the Worker Protection
|
||
Standard and that involves contact with anything that has been treated, such as plants, soil,
|
||
or water, are: coveralls, chemical-resistant gloves made of barrier laminate, chemical-resistant
|
||
footwear plus socks, and protective eyewear.
|
||
STORAGE AND DISPOSAL
|
||
Do not allow this product to contaminate water, foodstuffs, feed or seed by storage or disposal.
|
||
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed, seed, fertilizers, and
|
||
veterinary supplies. Keep container closed to prevent spills and contamination. PESTICIDE
|
||
DISPOSAL: To avoid wastes, use all material in this container, including rinsate, by application in
|
||
accordance with label directions. If wastes cannot be avoided, offer remaining product to a waste
|
||
disposal facility or pesticide disposal program. Such programs are often run by state or local
|
||
governments or by industry. All disposal must be in accordance with applicable federal, state and
|
||
local regulations and procedures. CONTAINER HANDLING AND DISPOSAL: Refillable container.
|
||
Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning
|
||
this container before refilling is the responsibility of the refiller. Cleaning this container before final
|
||
disposal is the responsibility of the person disposing of the container. To clean this container before
|
||
final disposal, empty the remaining contents from this container into application equipment or a
|
||
tank mix. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water
|
||
with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection
|
||
system. Repeat this rinsing procedure two more times. Then offer this container for recycling, if
|
||
available. To obtain information about recycling refillable containers, contact Bayer CropScience
|
||
LP at 1-866-99BAYER (1-866-992-2937).
|
||
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT, CALL TOLL-FREE,
|
||
1-866-99BAYER (1-866-992-2937)
|
||
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR MEDICAL
|
||
ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
|
||
TripleFLEX® is a registered trademark of Bayer Group. ©2020 Bayer Group. All rights reserved.
|
||
Produced for:
|
||
Bayer CropScience LP
|
||
800 N. Lindbergh Blvd.
|
||
St. Louis, MO 63167 USA
|
||
HERBICIDE
|
||
For Use in Conventional and Herbicide Tolerant Field and Silage Corn,
|
||
including Field Corn Hybrids with Roundup Ready ® 2 Technology,
|
||
including Roundup Ready® Corn 2
|
||
Active Ingredients:
|
||
Acetochlor: 2-chloro-2’-methyl-6’-ethyl-N-ethoxymethylacetanilide................................. 41.67%
|
||
Flumetsulam: N-(2,6-difluorophenyl)-5-methyl-1,2,4-triazolo-[1,5a]-
|
||
pyrimidine-2-sulfonamide ................................................................................................... 1.3%
|
||
Clopyralid: 3,6-dichloro-2-pyridine carboxylic acid, monoethanolamine salt .....................4.27%
|
||
Other Ingredients: ............................................................................................................ 52.76%
|
||
Total ..................................................................................................................................100.00%
|
||
Acid equivalent: clopyralid: 3,6-dichloro-2-pyridinecarboxylic acid – 3.24% (0.29 lb/gal)
|
||
Contains 3.75 lb acetochlor, 0.38 lb clopyralid monoethanolamine salt, and 0.12 lb flumetsulam
|
||
active ingredient per gallon
|
||
EPA Reg. No. 524-614
|
||
Keep out of reach of children.
|
||
WARNING! AVISO
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
|
||
(If you do not understand the label, find someone to explain it to you in detail.)
|
||
Please refer to booklet for additional precautionary statements and directions for use.
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
|
||
Suffolk Counties of New York State.
|
||
2D
|
||
CODE
|
||
US62219414B (150727Bv2) TripleFLEX II MINI BULK ECL BASE
|
||
Colors: Black, PMS 1595 & PMS 369 09/29/20
|
||
(Label Coordinator: Jacob Ziegler)
|