1967 lines
105 KiB
Markdown
1967 lines
105 KiB
Markdown
# Warrant Herbicide
|
||
|
||
- **Product class:** herbicide
|
||
- **EPA Reg No:** 524-591
|
||
- **Active ingredients:** Acetochlor
|
||
- **Source:** https://www.cropscience.bayer.us/crop-protection/herbicide/warrant-herbicide
|
||
- **Label PDF:** https://cs-assets.bayer.com/is/content/bayer/Warrant_Herbicide_Bayer1p_Labelpdf
|
||
|
||
---
|
||
|
||
US62219635C (200618Cv2) WARRANT 2.5 GAL ECL
|
||
Color: CMYK Date: 08/10/2021
|
||
(Label Coordinator: Mark Schmidt)
|
||
NET CONTENTS:
|
||
2.5 Gallons
|
||
Warrant Herbicide is an encapsulated herbicide for weed
|
||
control in Alfalfa, Field Corn, Popcorn, Production Seed
|
||
Corn, Silage Corn, Cotton, Peanut, Forage or Grain Sorghum
|
||
(Milo), Soybean, and Sugar Beet.
|
||
ACTIVE INGREDIENT:
|
||
*Acetochlor .................................................................................. 33.0%
|
||
OTHER INGREDIENTS .......................................................................... 67.0%
|
||
100.0%
|
||
*Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
|
||
N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
|
||
EPA Reg. No. 524-591 EPA Est. No. 524-IA-1
|
||
Keep out of reach of children.
|
||
CAUTION!
|
||
See inside for additional Precautions and First Aid.
|
||
COMPLETE DIRECTIONS FOR USE
|
||
SHAKE WELL BEFORE USING
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and
|
||
Suffolk Counties of New York State.
|
||
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
|
||
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
|
||
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR
|
||
MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
|
||
Packed For:
|
||
Bayer CropScience LP
|
||
800 N. Lindbergh Blvd.
|
||
St. Louis, Missouri 63167
|
||
©2021 Bayer Group
|
||
US62219635C 200618Cv2 08/21
|
||
ACETOCHLOR GROUP HERBICIDE
|
||
HERBICIDE
|
||
6.875”
|
||
7.125”
|
||
6.875”
|
||
6.625”
|
||
COPY AREA
|
||
COPY AREA
|
||
|
||
1
|
||
Read the entire label before using this product.
|
||
Use only according to label instructions.
|
||
Read “LIMIT OF WARRANTY AND LIABILITY” statement at the end of the label
|
||
before buying or using. If terms are not acceptable, return at once unopened.
|
||
CONTENTS
|
||
1 1.0 INGREDIENTS ....................................................................1
|
||
2 2.0 IMPORTANT PHONE NUMBERS .........................................1
|
||
3 3.0 PRECAUTIONARY STATEMENTS .........................................1
|
||
3.1 Hazards to Humans and Domestic Animals ........................1
|
||
3.2 Environmental Hazards ......................................................1
|
||
4 4.0 STORAGE AND DISPOSAL ..................................................2
|
||
5 5.0 PRODUCT INFORMATION ..................................................2
|
||
5.1 Use Restrictions .................................................................2
|
||
5.2 Replanting and Rotational Crops .........................................3
|
||
5.2.1 Replanting After Crop Loss ..................................3
|
||
5.2.2 Cover Crops ........................................................3
|
||
5.2.3 Rotational Crops .................................................3
|
||
6 6.0 WEED RESISTANCE MANAGEMENT ...................................3
|
||
6.1 W eed Management Practices.............................................. 3
|
||
6.2 Management of Herbicide-Resistant Biotypes ....................3
|
||
7 7.0 SOIL TEXTURE ...................................................................3
|
||
8 8.0 MIXING, SPRAYING AND HANDLING ..................................3
|
||
8.1 Equipment Cleaning & Repair .............................................4
|
||
8.2 Sprayer Compatibility .........................................................4
|
||
9 9.0 APPLICATION SYSTEMS ....................................................4
|
||
9.1 Ground Broadcast Treatment ..............................................4
|
||
9.2 Aerial Application Equipment ..............................................4
|
||
9.3 Center Pivot Irrigation Equipment .......................................4
|
||
9.4 Cultivation Information .......................................................5
|
||
10 10.0 APPLICATION TIMING AND METHODS ..............................5
|
||
10.1 Preplant, At-Planting, and Preemergence Surface ...............5
|
||
10.2 Postemergence Surface Application ....................................5
|
||
11 11.0 WEEDS CONTROLLED........................................................ 5
|
||
11.1 Annual Grasses ..................................................................5
|
||
11.2 Annual Broadleaves ...........................................................5
|
||
12 12.0 ALFALFA ...........................................................................6
|
||
12.1 Warrant Herbicide for Postemergence Use in Alfalfa ...........6
|
||
12.2 Warrant Herbicide Tank-Mixtures for
|
||
Postemergence Use in Alfalfa ............................................6
|
||
13 13.0 FIELD CORN, POPCORN, PRODUCTION SEED CORN,
|
||
AND SILAGE CORN ............................................................ 6
|
||
13.1 Warrant Herbicide for Preplant, At-Planting, and
|
||
Preemergence Use in Corn .................................................6
|
||
13.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
|
||
or Preemergence Use in Corn ............................................6
|
||
13.3 Warrant Herbicide for Postemergence Use in Corn .............6
|
||
13.4 Warrant Herbicide Tank-Mixtures for Postemergence
|
||
Use in Corn ................................................................................7
|
||
14 14.0 COTTON ...........................................................................7
|
||
14.1 Warrant Herbicide for Preplant, At-Planting, or
|
||
Preemergence Use in Cotton ...............................................7
|
||
|
||
14.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
|
||
or Preemergence Use in Cotton ...........................................7
|
||
14.3 Warrant Herbicide for Postemergence Use in Cotton ...........7
|
||
14.4 Warrant Herbicide Tank-Mixtures for Postemergence
|
||
Over-The-Top Use in Cotton ....................................................8
|
||
14.5 Warrant Herbicide Tank-Mixtures for
|
||
Post-Directed Use in Cotton................................................ 8
|
||
15 15.0 PEANUT ...........................................................................8
|
||
15.1 Warrant Herbicide for Preplant, At-Planting, or
|
||
Preemergence Use in Peanut ..............................................8
|
||
15.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
|
||
or Preemergence Use in Peanut ..........................................8
|
||
15.3 Warrant Herbicide for Postemergence Use in Peanut ...........8
|
||
15.4 Warrant Herbicide Tank-Mixtures for Postemergence
|
||
Use in Peanut .....................................................................8
|
||
16 16.0 FORAGE OR GRAIN SORGHUM (MILO) ..............................8
|
||
16.1 Warrant Herbicide for Preplant Incorporated,
|
||
Preemergence, or Postemergence in Sorghum ....................8
|
||
16.2 Warrant Herbicide Tank-Mixtures for Preplant Incorporated,
|
||
Preemergence, or Postemergence Use in Sorghum ............. 9
|
||
17 17.0 SOYBEAN ...........................................................................9
|
||
17.1 Warrant Herbicide for Preplant, At-Planting, or
|
||
Preemergence Use in Soybean ...............................................9
|
||
17.2 Warrant Herbicide Tank Mixtures for Preplant, At-Planting,
|
||
or Preemergence Use in Soybean........................................ 9
|
||
17.3 Warrant Herbicide for Postemergence Use in Soybean ........9
|
||
17.4 Warrant Herbicide Tank-Mixtures for Postemergence Use
|
||
in Soybean .......................................................................10
|
||
18 18.0 SUGAR BEET ....................................................................10
|
||
18.1 Warrant Herbicide for Postemergence
|
||
Use in Sugar Beet .............................................................10
|
||
18.2 Warrant Herbicide Tank-Mixtures for
|
||
Postemergence Use in Sugar Beet ....................................10
|
||
19 19.0 LIMIT OF WARRANTY AND LIABILITY .............................10
|
||
1.0 INGREDIENTS
|
||
ACTIVE INGREDIENT:
|
||
*Acetochlor .................................................................... 33.0%
|
||
OTHER INGREDIENTS: ........................................................ 67.0%
|
||
100.0%
|
||
*Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
|
||
N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
|
||
Licensed U.S. Patents for this product can be found at the following web
|
||
page: www.monsantotechnology.com .
|
||
2.0 IMPORTANT PHONE NUMBERS
|
||
1. FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT ,
|
||
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
|
||
2. IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR
|
||
FOR MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT,
|
||
1-800-334-7577
|
||
3.0 PRECAUTIONARY STATEMENTS
|
||
3.1 H azards to Humans and Domestic Animals
|
||
Keep out of reach of children.
|
||
CAUTION!
|
||
HARMFUL IF ABSORBED THROUGH THE SKIN OR INHALED.
|
||
MAY CAUSE ALLERGIC SKIN REACTION. Prolonged or frequently repeated skin
|
||
contact may cause allergic reactions in some individuals.
|
||
Avoid breathing vapor or spray mist.
|
||
Remove contaminated clothing and wash before reuse.
|
||
Avoid contact with skin or clothing. Wash thoroughly with soap and water
|
||
after handling.
|
||
FIRST AID: Call a poison control center or doctor for treatment advice.
|
||
IF ON SKIN
|
||
OR
|
||
CLOTHING
|
||
• Take off contaminated clothing.
|
||
• Rinse skin immediately with plenty of water for 15-20 minutes.
|
||
• Sensitized persons should avoid further contact and reuse
|
||
of contaminated clothing.
|
||
IF
|
||
INHALED
|
||
• Move person to fresh air.
|
||
• If person is not breathing, call 911 or an ambulance, then
|
||
give artificial respiration, preferably by mouth-to-mouth, if
|
||
possible.
|
||
• Have the product container or label with you when calling a poison control
|
||
center or doctor, or going for treatment.
|
||
• You may also contact 1-800-334-7577, collect day or night, for
|
||
emergency medical treatment information.
|
||
• This product is identified as Warrant Herbicide, EPA Registration
|
||
No. 524-591.
|
||
Personal Protective Equipment (PPE):
|
||
Some of the materials that are chemical-resistant to this product are
|
||
listed below.
|
||
Applicators and other handlers must wear: long-sleeved shirt and long
|
||
pants, chemical-resistant gloves made of any waterproof material such as
|
||
polyethylene or polyvinylchloride, and shoes plus socks.
|
||
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such
|
||
instructions for washables exist, use detergent and hot water. Keep and wash
|
||
PPE separately from other laundry.
|
||
Engineering Controls: When handlers use closed systems, or enclosed
|
||
cabs in a manner that meets the requirements listed in the Worker
|
||
Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)
|
||
(4-6)], the handler PPE requirements may be reduced or modified as
|
||
specified in the WPS.
|
||
User Safety Recommendations:
|
||
Users should:
|
||
• Wash hands before eating, drinking, chewing gum, using tobacco or using
|
||
the toilet.
|
||
• Remove clothing/PPE immediately if pesticide gets inside. Then wash
|
||
thoroughly and put on clean clothing.
|
||
• Remove PPE immediately after handling this product. Wash the outside
|
||
of gloves before removing. As soon as possible, wash thoroughly and
|
||
change into clean clothing.
|
||
3.2 Environmental Hazards
|
||
This product is toxic to fish. Do not apply directly to water, or to areas where surface
|
||
water is present or to intertidal areas below the mean high-water mark. Do not
|
||
contaminate water when disposing of equipment wash water.
|
||
This chemical demonstrates the properties and characteristics associated with
|
||
chemicals detected in ground water. The use of this chemical in areas where soils
|
||
are permeable, particularly where the ground water is shallow, may result in ground
|
||
water contamination.
|
||
Acetochlor has properties that may result in surface water contamination via
|
||
dissolved runoff and runoff erosion. Follow practices to minimize the potential for
|
||
dissolved runoff and/or runoff erosion.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
2
|
||
DIRECTIONS FOR USE
|
||
It is a violation of Federal law to use this product in any manner inconsistent
|
||
with its labeling. This product may only be used in accordance with the
|
||
Directions for Use on this label or in separately published supplemental
|
||
labeling. Supplemental labeling can be obtained from your Authorized Bayer
|
||
CropScience LP Retailer or Bayer CropScience LP Representative.
|
||
Do not apply this product in a way that will contact workers or other persons,
|
||
either directly or through drift. Only protected handlers may be in the area
|
||
during application. For any requirements specific to your State or Tribe,
|
||
consult the agency responsible for pesticide regulation.
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties
|
||
of New York State.
|
||
Agricultural Use Requirements
|
||
Use this product only in accordance with its labeling and with the Worker
|
||
Protection Standard, 40 CFR part 170. This Standard contains requirements
|
||
for the protection of agricultural workers on farms, forests, nurseries,
|
||
and greenhouses, and handlers of agricultural pesticides. It contains
|
||
requirements for training, decontamination, notification and emergency
|
||
assistance. It also contains specific instructions and exceptions pertaining
|
||
to the statements on this label about personal protective equipment (PPE)
|
||
and restricted-entry interval. The requirements in this box only apply to uses
|
||
of this product that are covered by the Worker Protection Standard.
|
||
Do not enter or allow worker entry into treated areas during the restricted
|
||
entry interval (REI) of 12 hours. Exception: if the product is soil-injected
|
||
or soil-incorporated, the Worker Protection Standard, under certain
|
||
circumstances, allows workers to enter the treated area if there will be no
|
||
contact with anything that has been treated.
|
||
PPE required for early entry to treated areas that is permitted under the
|
||
Worker Protection Standard and that involves contact with anything that
|
||
has been treated, such as plants, soil, or water, are: coveralls, chemical-
|
||
resistant gloves made of any waterproof material, and shoes plus socks.
|
||
4.0 STORAGE AND DISPOSAL
|
||
Proper pesticide storage and disposal are essential to protect against
|
||
exposure to people and the environment due to leaks and spills, excess
|
||
product or waste, and vandalism.
|
||
Do not allow this product to contaminate water, foodstuffs, feed or seed
|
||
by storage or disposal.
|
||
PESTICIDE STORAGE: Store pesticides away from food, pet food, feed,
|
||
seed, fertilizers, and veterinary supplies. Keep container closed to prevent
|
||
spills and contamination.
|
||
PESTICIDE DISPOSAL: To avoid wastes, use all material in this container,
|
||
including rinsate, by application according to label directions. If wastes
|
||
cannot be avoided, offer remaining product to a waste disposal facility
|
||
or pesticide disposal program. Such programs are often run by state or
|
||
local governments or by industry. All disposal must be in accordance with
|
||
applicable federal, state and local regulations and procedures.
|
||
CONTAINER HANDLING AND DISPOSAL:
|
||
Non-refillable, Rigid Plastic 2.5-gallon Containers of greater than
|
||
1-gallon but equal to or less than 5-gallon capacity:
|
||
Non-refillable container. Do not reuse this container to hold materials
|
||
other than pesticides or dilute pesticides (rinsate). After emptying and
|
||
cleaning, it may be allowable to temporarily hold rinsate or other pesticide-
|
||
related materials in the container. Contact your state regulatory agency to
|
||
determine allowable practices in your state.
|
||
Triple rinse or pressure rinse (or equivalent) this container promptly after
|
||
emptying.
|
||
Triple rinse as follows: Empty the remaining contents into application
|
||
equipment or a mix tank and drain for 10 seconds after the flow begins to
|
||
drip. Fill the container 1/4-full with water and recap. Shake for 10 seconds.
|
||
Pour rinsate into application equipment or a mix tank or store rinsate for
|
||
later use or disposal. Drain for 10 seconds after the flow begins to drip.
|
||
Repeat this procedure two more times.
|
||
Pressure rinse as follows: Empty the remaining contents into application
|
||
equipment or a mix tank and continue to drain for 10 seconds after the flow
|
||
begins to drip. Hold container upside down over application equipment or
|
||
mix tank or collect rinsate for later use or disposal. Insert pressure rinsing
|
||
nozzle in the side of the container, and rinse at about 40 PSI for at least 30
|
||
seconds. Drain for 10 seconds after the flow begins to drip.
|
||
Once properly rinsed, some agricultural plastic pesticide containers can
|
||
be taken to a container collection site or picked up for recycling. To find
|
||
the nearest site, contact your chemical dealer or Bayer CropScience LP at
|
||
1-866-99BAYER (1-866-992-2937). If recycling is not available, dispose
|
||
of in accordance with federal, state, and local regulations and procedures,
|
||
which may include puncturing the properly rinsed container and disposing
|
||
in a sanitary landfill.
|
||
5.0 PRODUCT INFORMATION
|
||
Warrant Herbicide is for control of the annual grasses and broadleaf weeds
|
||
listed in the “WEEDS CONTROLLED” section of this label. This product will not
|
||
control emerged seedlings. This product is to be applied preplant, at-planting,
|
||
preemergence, and/or postemergence to the labeled crops and preemergence
|
||
to the weeds. Read and carefully observe precautionary statements and all
|
||
other information appearing on the labeling of all products used in mixtures
|
||
and sequential treatments.
|
||
5.1 Use Restrictions
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties
|
||
of New York State.
|
||
This chemical demonstrates the properties and characteristics associated
|
||
with chemicals detected in ground water. The use of this chemical in areas
|
||
where soils are permeable, particularly where the ground water is shallow,
|
||
may result in ground water contamination. On the following soil types, do
|
||
not apply this product within 50 feet of any well where the depth to ground
|
||
water is 30 feet or less: sands with less than 3 percent organic matter; loamy
|
||
sands with less than 2 percent organic matter; or sandy loams with less than
|
||
1 percent organic matter. See the figure for additional clarification.
|
||
This product may not be mixed or loaded within 50 feet of any wells (including
|
||
abandoned wells and drainage wells), sink holes, perennial or intermittent
|
||
streams and rivers, and natural or impounded lakes and reservoirs. This
|
||
setback does not apply to properly capped or plugged abandoned wells and
|
||
does not apply to impervious pad or properly diked mixing/loading areas.
|
||
Operations that involve mixing, loading, rinsing, or washing of this product into
|
||
or from pesticide handling or application equipment or containers within 50 feet
|
||
of any well are prohibited unless conducted on an impervious pad constructed
|
||
to withstand the weight of the heaviest load that may be positioned on or moved
|
||
across the pad. Such a pad shall be designed and maintained to contain any
|
||
product spills or equipment leaks, container or equipment rinse or washwater,
|
||
and rainwater that may fall on pad. Surface water shall not be allowed to either
|
||
flow over or from the pad, which means the pad must be self-contained. The
|
||
pad shall be sloped to facilitate material removal. An unroofed pad shall be
|
||
of sufficient capacity to contain a minimum of 110 percent of the capacity of
|
||
the largest pesticide container or application equipment on the pad. A pad
|
||
that is covered by a roof of sufficient size to completely exclude precipitation
|
||
from contact with the pad shall have a minimum containment capacity of
|
||
100 percent of the capacity of the largest pesticide container or application
|
||
equipment on the pad. Containment capacities as described above shall be
|
||
maintained at all times. The above specified minimum containment capacities
|
||
do not apply to vehicles when delivering pesticide shipments to the mixing/
|
||
loading site. States may have in effect additional requirements regarding
|
||
wellhead setbacks and operational containment.
|
||
Maximum Application Rates: The maximum application or use rates stated
|
||
throughout this label are given in units of volume (fluid ounces or quarts)
|
||
of this product per acre. However, the maximum allowed application rates,
|
||
apply to this product combined with the use of any and all other herbicides
|
||
containing the active ingredient acetochlor, whether applied separately or in a
|
||
tank mixture, on a basis of total pounds of acetochlor per acre. If more than one
|
||
acetochlor-containing product is applied to the same site within the same year,
|
||
do not exceed the allowed maximum total of 3 pounds per acre of acetochlor.
|
||
See the “INGREDIENTS” section of this label for necessary product information.
|
||
Do not flood irrigate to apply or incorporate this product.
|
||
Product must be used in a manner which will prevent back siphoning into wells,
|
||
spills or improper disposal of excess pesticide, spray mixtures or rinsates.
|
||
Make applications of this product promptly after preparing the spray mixture.
|
||
Avoid use of spray solutions of this product which have been allowed to stand
|
||
or have been stored in application equipment or the mix tank for an extended
|
||
period of time as crop injury could result.
|
||
Do not make postemergence surface applications using sprayable fluid fertilizer
|
||
as the carrier because severe crop injury may occur.
|
||
Do not apply this product through any type of irrigation system except under
|
||
conditions specified on this label, or otherwise directed on separately published
|
||
supplemental labeling for this product in possession of the user at the time
|
||
of application.
|
||
Do not apply this product using center pivot equipment except under the
|
||
conditions specified in the Center Pivot Application Equipment section of this
|
||
label, or on separately published center pivot application supplemental labeling
|
||
for this product in possession of the user at the time of application.
|
||
Disposal of excess pesticide, spray mixtures or rinsate must be according to
|
||
label use instructions or according to the State Pesticide or Environmental
|
||
Control Agency or the Hazardous Waste representative at the nearest EPA
|
||
regional office.
|
||
Do not apply under conditions which favor runoff or wind erosion of soil
|
||
containing this product to non-target areas. To prevent off-site movement due
|
||
to runoff or wind erosion:
|
||
• Avoid treating powdery dry or light sandy soils when conditions are favorable
|
||
for wind erosion. Under these conditions, the soil surface must first be
|
||
settled by rainfall or irrigation.
|
||
• Do not apply to impervious substrates such as paved or highly compacted
|
||
surfaces or frozen or snow-covered soils.
|
||
• Do not use tailwater from the first flood or furrow irrigation of treated fields
|
||
to treat non-target crops unless at least 1/2 inch of rainfall has occurred
|
||
between application and the first irrigation.
|
||
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
3
|
||
Do not apply this product using aerial application equipment except under the
|
||
conditions specified, and only in the states listed, in the Aerial Application
|
||
Equipment section of this label, or only in other states listed in separately
|
||
published aerial application supplemental labeling for this product, in
|
||
possession of the user at the time of application.
|
||
Do not apply when wind conditions favor drift to non-target sites. To minimize
|
||
spray drift to non-target areas:
|
||
• Use low-pressure application equipment capable of producing a large droplet
|
||
spray. Do not use nozzles that produce a fine droplet spray. Minimize drift by
|
||
using sufficient spray volume to ensure adequate coverage with large droplet
|
||
size sprays.
|
||
• Keep ground driven spray boom as low as possible above the target surface.
|
||
• Make application when the wind velocity favors on-target product deposition
|
||
(approximately 3 to 10 miles per hour). Do not apply when wind velocity
|
||
exceeds 15 miles per hour. Avoid application when gusts approach 15 miles
|
||
per hour.
|
||
• Low humidity and high temperatures increase the likelihood of spray drift to
|
||
sensitive areas. Avoid spraying during conditions of low humidity and/or high
|
||
temperatures. Do not apply during inversion conditions.
|
||
Use of this product not consistent with this label may result in injury to persons,
|
||
animals or crops, or other unintended consequences.
|
||
Flush sprayer with clean water after use.
|
||
Dry weather may reduce effectiveness of this product. Cultivate if weeds
|
||
develop.
|
||
5.2 Replanting and Rotational Crops
|
||
5.2.1 Replanting After Crop Loss
|
||
If a crop treated with this product is lost, the crops listed below may be replanted
|
||
immediately. Immediate replanting of any of the crops listed could result in
|
||
crop injury.
|
||
These crops include:
|
||
• field corn, seed corn, silage corn, popcorn
|
||
• cotton
|
||
• milo (sorghum)
|
||
• peanut
|
||
• soybean
|
||
Replanting Restrictions:
|
||
When replanting milo (sorghum) use only seed properly treated with seed
|
||
protectant or safener.
|
||
Do not exceed the annual maximum total of 3.0 pounds per acre of acetochlor
|
||
active ingredient if additional acetochlor is applied in the replanted crop.
|
||
5.2.2 Cover Crops
|
||
Non-food and non-feed cover crops may be planted after the harvest of a crop
|
||
treated with this product, as a means of soil improvement, erosion control, or
|
||
weed suppression. However, injury to cover crops may occur, as all possible
|
||
cover crops have not been evaluated for tolerance to this product.
|
||
Cover crops should be tilled or controlled with application of a non-selective
|
||
herbicide prior to or at the next planting of any crop listed on this product label.
|
||
Restriction: If the cover crop is maintained, do not graze or harvest cover
|
||
crops for food or animal feed for a minimum of 18 months following last
|
||
application of Warrant Herbicide.
|
||
5.2.3 Rotational Crops
|
||
Observe the following rotational planting intervals after the last application of
|
||
Warrant Herbicide.
|
||
• Nongrass animal feeds such as clover, kudzu, lespedeza, lupin, sainfoin,
|
||
trefoil, velvet bean, and Vetch spp. may be planted 9 months after
|
||
application.
|
||
• Wheat (Triticum spp.) may be planted 4 months after application.
|
||
Rotate the next spring to the following crops:
|
||
• Cereal Grains:
|
||
Barley, Buckwheat, Millet (pearl and proso), Oats, Rice, Rye, Teosinte, Triticale,
|
||
and Wild rice
|
||
• Dried shelled pea and bean (except soybean) subgroup:
|
||
Restriction: Do not rotate to any species or variety of succulent bean or pea.
|
||
Lupinus spp.: grain lupin, sweet lupin, white lupin, white sweet lupin.
|
||
Phaseolus spp.: field bean, kidney bean, lima bean, navy bean, pinto bean,
|
||
and tepary bean.
|
||
Vigna spp.: adzuki bean, blackeyed pea, catjang, cowpea, Crowder pea, moth bean,
|
||
mung bean, rice bean, southern pea and urd bean.
|
||
Broad bean; chickpea; guar; lablab bean; lentil; pea (Pisum spp., includes field
|
||
pea); pigeon pea.
|
||
Other crops:
|
||
° For any crop listed below that is also a direct crop use approved on
|
||
labeling for this product, carefully follow all use instructions on the main
|
||
label booklet and separately published supplemental labeling for this product.
|
||
Alfalfa
|
||
Field corn, seed corn, silage corn, popcorn
|
||
Sweet corn
|
||
Cotton
|
||
Peanut
|
||
Potato (Solanum tuberosum) (does not include Sweet Potato)
|
||
Milo (sorghum)
|
||
Soybean
|
||
Sugar beet
|
||
Sunflower
|
||
Tobacco
|
||
6.0 WEED RESISTANCE MANAGEMENT
|
||
Acetochlor, the active ingredient in this product, is a Group 15 herbicide based
|
||
on the mode of action classification system of the Weed Science Society of
|
||
America. Any weed population can contain plants that are naturally resistant
|
||
to Group 15 herbicides. Weeds resistant to Group 15 herbicides can be
|
||
effectively managed by using another herbicide from a different Group (either
|
||
alone or in a mixture according to label directions), by using other cultural or
|
||
mechanical methods of weed control, or by a combination of the two.
|
||
Consult your local company representative, state cooperative extension agent,
|
||
professional consultant or other qualified authority to determine appropriate
|
||
actions for controlling specific resistant weeds.
|
||
6.1 Weed Management Practices
|
||
Resistant populations arise when rare individual plants are uncontrolled by
|
||
a normal dose of a given herbicide under normal environmental conditions.
|
||
In the absence of other control measures these individuals survive, produce
|
||
seed, and eventually become the dominant biotype in the field through
|
||
continuous selection. The best means of reducing this selection is to use
|
||
diverse weed control practices such as multiple herbicides with different
|
||
mechanisms of action for the target weed, and often in combination with
|
||
various mechanical and cultural practices.
|
||
To minimize the occurrence of herbicide-resistant biotypes, including those
|
||
resistant to Group 15 herbicides, implement the following weed management
|
||
practice options that are practical to your situation. These management
|
||
practices are applicable to reduce the spread of confirmed resistant biotypes
|
||
(managing existing resistant biotypes) and to reduce the potential for selecting
|
||
for resistance in new species (proactive resistance management).
|
||
• Use a diversified approach toward weed management focused on
|
||
preventing weed seed production and reducing the number of weed seeds
|
||
in the soil.
|
||
• Plant crops into fields that are as weed-free as possible and then keep
|
||
them as weed-free as possible.
|
||
• Plant crop seed that is as weed-free as possible.
|
||
ACETOCHLOR GROUP HERBICIDE
|
||
• Scout fields routinely, before and after herbicide application.
|
||
• Use multiple herbicide modes of action that are effective against the
|
||
most troublesome weeds in your field and against those with known
|
||
resistance.
|
||
• Apply herbicides at application rates listed on the label when weeds are
|
||
within the size range indicated on the label.
|
||
• Emphasize cultural practices that suppress weeds by using crop
|
||
competitiveness.
|
||
• Use mechanical and biological weed management practices where
|
||
appropriate.
|
||
• Prevent field-to-field and within-field movement of weed seed or
|
||
vegetative propagules.
|
||
• Manage weed seed at harvest and after harvest to prevent a buildup of
|
||
the weed seedbank.
|
||
6.2 Management of Herbicide-Resistant Biotypes
|
||
Appropriate testing is needed to determine if a weed is resistant to Group
|
||
15 herbicides. Call 1-866-99BAYER (1-866-992-2937) or contact your Bayer
|
||
CropScience LP representative or your local State Cooperative Extension
|
||
Agency to determine if resistance in any particular weed biotype has been
|
||
confirmed in your area, or visit on the Internet
|
||
www.weedresistancemanagement.com or www.weedscience.org.
|
||
Specifically, glyphosate resistant weeds can be controlled or managed by
|
||
applying this product in combination with herbicides labeled for control of
|
||
the targeted weed in the crops specified on this label. For more information,
|
||
see the “WEEDS CONTROLLED” section of this label.
|
||
Since the occurrence of resistant weeds is difficult to detect prior to use,
|
||
Bayer CropScience LP accepts no liability for any losses that result from the
|
||
failure of this product to control resistant weeds.
|
||
7.0 SOIL TEXTURE
|
||
Applicators must evaluate soil conditions carefully to assure that they choose
|
||
the correct label rate.
|
||
The use rates of this product and the other herbicides labeled for use in
|
||
tank mixtures with this product vary with soil texture. Unless soil texture is
|
||
specifically named, rate tables throughout this label refer to only three soil
|
||
textural groups: coarse, medium and fine. The following is a complete listing
|
||
of soil textures included in each of these three soil textural groups:
|
||
SOIL TEXTURAL GROUP SOIL TEXTURE
|
||
COARSE sand, loamy sand, sandy loam
|
||
MEDIUM loam, silt loam, silt, sandy clay loam
|
||
FINE silty clay loam, clay loam, sandy clay, silty
|
||
clay, clay
|
||
Refer to the above table to determine the corresponding soil textural group
|
||
for the soil to be treated.
|
||
8.0 MIXING, SPRAYING AND HANDLING
|
||
NOTE: Minimize direct contact or exposure to this product or spray
|
||
mixtures of this product. The following instructions for transfer, mixing,
|
||
cleaning or repairing equipment must be followed in order to minimize
|
||
this exposure. Review the protective clothing requirements as listed in the
|
||
“PRECAUTIONARY STATEMENTS” section of this label and do not use this
|
||
product until you have the necessary protective clothing.
|
||
2.5 Gallon Containers
|
||
Open pouring from these containers can result in exposure from splashing
|
||
or spilling. Special care in lifting and pouring are strongly recommended.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
4
|
||
Bulk Containers
|
||
Do not open pour from bulk containers as it can result in exposure from
|
||
splashing or spilling. Transfer this product from these containers to the mix or
|
||
spray tank using pumps or transfer probes. Do not remove or disconnect the
|
||
probe or pump from the container until the container is emptied and rinsed.
|
||
Use the pump or probe system to rinse the empty container and transfer the
|
||
rinsate directly to the mix or spray tank.
|
||
8.1 Equipment Cleaning & Repair
|
||
Cleaning and repair of transfer systems and application equipment is a source of
|
||
exposure to this product. Take precautions to minimize exposure during cleaning
|
||
and repair of transfer systems and application equipment. Whenever possible,
|
||
rinse these systems or equipment before being cleaning or repair.
|
||
When repairs must be made during transfer or application, the equipment should
|
||
be shut down, and special care taken to avoid contact with the pesticide.
|
||
8.2 Sprayer Compatibility
|
||
Always predetermine the compatibility of this product or labeled tank mixtures
|
||
of this product with water carrier by mixing small proportional quantities in
|
||
advance.
|
||
Mix this product or labeled tank mixture of this product with the appropriate
|
||
carrier as follows:
|
||
1. Place a 20- to 35-mesh screen or wetting basket over filling port.
|
||
2. Through the screen, fill the sprayer tank one-half full with the appropriate
|
||
carrier.
|
||
3. If a compatibility agent is necessary to improve mixing or to prevent the
|
||
formation of undesirable and unsprayable gels or precipitates, while agitating
|
||
add it to the carrier already in the tank. Use only compatibility agents cleared
|
||
by FDA for this use. Read and follow all directions for use, cautionary
|
||
statements and all other information appearing on the selected compatibility
|
||
agent label. Check for adequate agitation.
|
||
4. If a wettable powder or dry flowable formulation is used, make a slurry with
|
||
water and add it slowly through the screen into the tank. Continue agitation.
|
||
5. If a flowable formulation is used, add slowly through screen into the tank.
|
||
Mixing and compatibility may be improved when flowable is pre-mixed one
|
||
part flowable with one part water and added to the tank in diluted form.
|
||
6. Add this product slowly through the screen into the tank. Mixing and
|
||
compatibility may be improved when this product is prediluted with two
|
||
parts of water and added to the tank in diluted form.
|
||
7. Complete filling the sprayer tank with carrier. If a Roundup ® agricultural
|
||
herbicide or a Gramoxone brand herbicide is used, add the required amount
|
||
near the end of the filling process. Remove hose from tank immediately after
|
||
filling to avoid siphoning back into the carrier source.
|
||
Maintain good agitation at all times until the contents of the tank are sprayed.
|
||
NOTE: If spray mixture is allowed to settle at any time, thorough agitation is
|
||
required to resuspend the mixture before spraying is resumed. Keep by-pass
|
||
line on or near bottom of tank to minimize foaming. Screen size in nozzle or line
|
||
strainers must be 50-mesh. Carefully select proper nozzle to avoid spraying a
|
||
fine mist. Check for even distribution of spray droplets. To reduce loss of the
|
||
chemical due to drift of a fine mist, apply at nozzle pressures below 40 psi.
|
||
9.0 APPLICATION SYSTEMS
|
||
9.1 Ground Broadcast Treatment
|
||
Apply this product and the labeled tank mixtures in 10 or more gallons of
|
||
solution per acre using broadcast boom equipment. Do not apply during
|
||
periods of gusty winds, when winds are in excess of 15 miles per hour or
|
||
when other conditions favoring drift exist.
|
||
9.2 Aerial Application Equipment:
|
||
Fixed-Wing and Helicopter
|
||
Unless otherwise prohibited, all applications of Warrant Herbicide described
|
||
on this label or in separately published supplemental labeling for this product
|
||
may be made using aerial application equipment where appropriate, provided
|
||
that the applicator complies with the precautions and restrictions specified on
|
||
this label and on separate supplemental labeling published for this product.
|
||
Aerial applications of this product may be made in the following listed states
|
||
only, or only in other states listed on seperately published aerial application
|
||
supplemental labeling for this product:
|
||
Alabama, Arkansas, Colorado, Georgia, Kansas, Kentucky, Louisiana,
|
||
Mississippi, Missouri, Nebraska, North Carolina, North Dakota,
|
||
Oklahoma, South Carolina, Tennessee, Texas, and Virginia
|
||
Do not apply Warrant Herbicide using aerial application equipment except
|
||
under conditions specified on this label or in separately published aerial
|
||
application supplemental labeling for this product.
|
||
Apply this product at the appropriate rate as directed on this label in 3 to
|
||
15 gallons of water per acre unless otherwise directed on this label or in
|
||
separate supplemental labeling or Fact Sheets published for this product.
|
||
Unless otherwise specified, do not exceed 2 quarts of this product per acre
|
||
when using aerial application equipment. Refer to the individual use area
|
||
sections of this label for application rates, spray volumes and additional use
|
||
instructions.
|
||
Ensure uniform application. To avoid streaked, uneven or overlapped
|
||
application, use appropriate marking devices.
|
||
AERIAL SPRAY DRIFT MANAGEMENT
|
||
The following drift management requirements must be followed to avoid
|
||
off-target drift movement from aerial application to agricultural field crops.
|
||
1. The distance of the outermost nozzles on the boom must not exceed
|
||
3/4 the length of the wingspan or rotor.
|
||
2. Nozzles must always point backward, parallel with the air stream and
|
||
never be pointed downwards more than 45 degrees. Where States have
|
||
more stringent regulations, they should be observed.
|
||
Importance of Droplet Size
|
||
The most effective way to reduce drift potential is to apply large droplets.
|
||
The best drift management strategy is to apply the largest droplets that
|
||
provide sufficient coverage and control. Applying larger droplets reduces drift
|
||
potential but will not prevent drift if the application is made improperly, or
|
||
under unfavorable environmental conditions (see the “Wind”, “Temperature
|
||
and Humidity” and “Temperature Inversions” sections of this label).
|
||
Controlling Droplet Size
|
||
• Volume: Use high flow rate nozzles to apply the highest practical spray
|
||
volume. Nozzles with the higher rated flows produce larger droplets.
|
||
• Pressure: Use the lower spray pressure listed for the nozzle. Higher pressure
|
||
reduces droplet size and does not improve canopy penetration. When higher
|
||
flow rates are needed, use higher flow rate nozzles instead of increasing
|
||
pressure.
|
||
• Number of nozzles: Use the minimum number of nozzles that provide
|
||
uniform coverage.
|
||
• Nozzle orientation: Orienting nozzles so that the spray is released
|
||
backwards, parallel to the air stream, will produce larger droplets than
|
||
other orientations. Significant deflection from the horizontal will reduce
|
||
droplet size and increase drift potential.
|
||
• Nozzle type: Use a nozzle type that is designed for the intended
|
||
application. With most nozzle types, narrower spray angles produce larger
|
||
droplets. Consider using low-drift nozzles. Solid stream nozzles oriented
|
||
straight back produce larger droplets than other nozzle types.
|
||
• Boom length: For some use patterns, reducing the effective boom length
|
||
to less than 3/4 of the wingspan or rotor length could further reduce drift
|
||
without reducing swath width.
|
||
• Application height: Application must be made at a height of 10 feet or
|
||
less above the top of the largest plants unless a greater height is required
|
||
for aircraft safety. Making the application at the lowest height that is safe
|
||
reduces the exposure of the droplets to evaporation and wind.
|
||
Swath Adjustment
|
||
When an application is made with a crosswind present, the swath will be
|
||
displaced downwind. Therefore, on the up and downwind edges of the field,
|
||
the applicator must compensate for this displacement by adjusting the path of
|
||
the aircraft upwind. Increase the swath adjustment distance with increasing
|
||
drift potential (higher wind, smaller droplets, etc.).
|
||
Wind
|
||
Drift potential is lowest between wind speeds of 2 to 10 miles per hour.
|
||
However, many factors, including droplet size and equipment type, determine
|
||
drift potential at any given speed. Avoid application when wind speeds are
|
||
below 2 miles per hour due to variable wind direction and high inversion
|
||
potential. NOTE: Local terrain can influence wind patterns. Every applicator
|
||
must be familiar with local wind patterns and how they affect drift.
|
||
Temperature and Humidity
|
||
When making applications in low relative humidity, set up equipment to
|
||
produce larger droplets to compensate for evaporation. Droplet evaporation
|
||
is most severe when conditions are both hot and dry.
|
||
Temperature Inversions
|
||
Do not apply during a temperature inversion because drift potential is high.
|
||
Temperature inversions restrict vertical air mixing, which causes small,
|
||
suspended droplets to remain in a concentrated cloud. This cloud can
|
||
move in unpredictable directions due to the light variable winds common
|
||
during inversions. Temperature inversions are characterized by increasing
|
||
temperatures with altitude and are common on nights with limited cloud cover
|
||
and light to no wind. They begin to form as the sun sets and often continue
|
||
into the morning. Their presence can be indicated by ground fog; however, if
|
||
fog is not present, inversions can also be identified by the movement of smoke
|
||
from a ground source or an aircraft smoke generator. Smoke that layers and
|
||
moves laterally in a concentrated cloud (under low wind conditions) indicates
|
||
an inversion, while smoke that moves upward and rapidly dissipates indicates
|
||
good vertical air mixing.
|
||
Sensitive Areas
|
||
Apply this product only when the potential for drift to adjacent sensitive
|
||
areas (e.g., residential areas, bodies of water, known habitat for threatened
|
||
or endangered species, non-target crops) is minimal (e.g., when wind is
|
||
blowing away from the sensitive areas).
|
||
Aircraft Maintenance
|
||
Thoroughly wash aircraft, especially landing gear, after each day of spraying
|
||
to remove residues of this product accumulated during spraying or from
|
||
spills. PROLONGED EXPOSURE OF THIS PRODUCT TO UNCOATED STEEL
|
||
SURFACES COULD RESULT IN CORROSION AND POSSIBLE FAILURE OF THE
|
||
PART. LANDING GEAR IS MOST SUSCEPTIBLE. The maintenance of an organic
|
||
coating (paint) that meets aerospace specification MIL-C-38413 can help
|
||
prevent corrosion.
|
||
9.3 Center Pivot Application Equipment
|
||
All treatments described on this label or separately published supplemental
|
||
labeling for this product may be made using center pivot irrigation equipment
|
||
where appropriate, provided that the applicator complies with the precautions
|
||
and restrictions specified on this label and in separate supplemental labeling
|
||
published for this product.
|
||
This product alone or in tank mixture with other herbicides on this label,
|
||
which are registered for center pivot application, may be applied using center
|
||
pivot irrigation systems. Do not apply this product through any other type
|
||
of irrigation system.
|
||
Ensure that the soil type and depth to ground water comply with the following
|
||
restriction. On the following soil types, do not apply this product within 50 feet
|
||
of any well where the depth to ground water is 30 feet or less: sands with less
|
||
than 3 percent organic matter; loamy sands with less than 2 percent organic
|
||
matter; or sandy loams with less than 1 percent organic matter.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
5
|
||
Crop injury, lack of effectiveness, or illegal pesticide residues in the crop can
|
||
result from non-uniform distribution of treated water. Use only in systems
|
||
that apply uniformly.
|
||
If you have questions about calibration, you should contact State Extension
|
||
Service specialists, equipment manufacturers or other experts.
|
||
Do not chemigate through systems connected to a public water system.
|
||
A person knowledgeable of the chemigation system and responsible for its
|
||
operation, or under the supervision of the responsible person, shall shut
|
||
the system down and make necessary adjustments should the need arise.
|
||
Do not apply when system connections or fittings leak, when nozzles do not
|
||
provide uniform distribution or when the line containing the product must be
|
||
dismantled and drained.
|
||
The system must contain a functional check valve, vacuum relief valve and
|
||
low-pressure drain appropriately located on the irrigation pipeline to prevent
|
||
water source contamination from back flow.
|
||
The pesticide injection pipeline must contain a functional, automatic, quick-
|
||
closing check valve to prevent the flow of fluid back toward the injection
|
||
pump.
|
||
The pesticide injection pipeline must also contain a functional, normally
|
||
closed, solenoid operated valve located on the intake side of the injection
|
||
pump and connected to the system interlock to prevent fluid from being
|
||
withdrawn from the supply tank when the irrigation system is either
|
||
automatically or manually shut down.
|
||
The system must contain functional interlocking controls to automatically shut
|
||
off the pesticide injection pump when the water pump motor stops.
|
||
The irrigation line or water pump must include a functional pressure switch
|
||
that will stop the water pump motor when the water pressure decreases to
|
||
the point where pesticide distribution is adversely affected.
|
||
Systems must use a metering pump, such as a positive displacement
|
||
injection pump (e.g., diaphragm pump) effectively designed and constructed
|
||
of materials that are compatible with pesticides and capable of being fitted
|
||
with a systems interlock. Pumps, injection equipment, agitation equipment,
|
||
hoses and connections between supply tank and the point of injection must be
|
||
constructed of materials which are resistant to this product.
|
||
Meter this product or a labeled tank-mixture of this product into the center
|
||
pivot irrigation system after planting and before crop emergence. Herbicide
|
||
application should be made in 1/2 to 3/4 inch of water per acre. Do not apply
|
||
in more than 3/4 inch of water per acre under any conditions or reduced
|
||
performance may occur. On very sandy soils (more than 60 percent sand
|
||
and less than 1 percent organic matter), use a maximum of 1/2 inch water
|
||
per acre. Good agitation must be maintained during the entire application
|
||
period. Flush the system with water when application is complete. Refer
|
||
to the “MIXING, SPRAYING AND HANDLING” section of the label for mixing
|
||
procedures.
|
||
Do not apply this product in a tank-mixture through center pivot irrigation
|
||
unless the treatment is specifically recommended on the label of the tank
|
||
mixture product.
|
||
9.4 Cultivation Information
|
||
Delay cultivation after application of this product for as long as possible unless
|
||
weeds or grasses emerge. Shallowly cultivate or rotary hoe immediately if
|
||
weeds or grasses emerge. If cultivation is necessary because of soil crusting
|
||
or compaction, set equipment shallow and minimize lateral soil movement to
|
||
avoid dilution or displacement of the herbicide treatment.
|
||
10.0 APPLICATION TIMING AND METHODS
|
||
10.1 Preplant, At-Planting, and Preemergence
|
||
Surface Application
|
||
Where specified, applications of this product may be made prior to planting,
|
||
at-planting, or prior to emergence of the crops listed on this label or in
|
||
separately published supplemental labeling. Warrant Herbicide will not control
|
||
emerged weeds so it must be applied to a weed-free soil surface or in a
|
||
tank-mixture with products that provide postemergence control of weeds at
|
||
the time of application. Read and follow all restrictions and directions on tank-
|
||
mix product labels. Precipitation or overhead sprinkler irrigation is required
|
||
after application to move the herbicide into the weed germination zone to
|
||
control un-emerged weeds. The amount of precipitation or irrigation required
|
||
depends on existing soil moisture, soil type and percent organic matter
|
||
content, but 1/2 to 3/4 inch is normally adequate. Do not utilize mechanical
|
||
incorporation unless specifically recommended on this label or on separately
|
||
published supplemental labeling for this product. If weeds emerge after
|
||
treatment, rotary hoe or shallowly cultivate to control weeds.
|
||
10.2 Postemergence Surface Application
|
||
Postemergence surface applications of this product must be made
|
||
postemergence to the crop but prior to weed seedling emergence or in a
|
||
tank mixture that controls emerged weeds. Warrant Herbicide will not control
|
||
emerged weeds so it must be applied to a weed-free soil surface or in a tank-
|
||
mixture with products that provide postemergence control of weeds at the
|
||
time of application. Read and follow all restrictions and directions on tank-mix
|
||
product labels. Precipitation or overhead sprinkler irrigation is required after
|
||
application to move the herbicide into the weed germination zone to control
|
||
un-emerged weeds. The amount of precipitation or irrigation required depends
|
||
on existing soil moisture, soil type and percent organic matter content, but
|
||
1/2 to 3/4 inch is normally adequate. If weeds emerge after treatment, rotary
|
||
hoe or shallowly cultivate to control weeds.
|
||
NOTE: DO NOT make postemergence surface applications using sprayable
|
||
fluid fertilizer as the carrier because severe crop injury may occur.
|
||
11.0 WEEDS CONTROLLED
|
||
When applied as directed under conditions described, this product and tank
|
||
mixtures of this product will control or reduce competition from the weeds listed.
|
||
NOTE: C = Control R = Reduced Competition
|
||
11.1 Annual Grasses
|
||
Barnyardgrass
|
||
Echinocloa crus-galli C
|
||
Crabgrass
|
||
Digitaria ischaemum C
|
||
Crowfootgrass
|
||
Dactyloctenium aegyptium (L.)
|
||
Willd. C
|
||
Cupgrass, prairie
|
||
Eriochloa contracta Hitchc C
|
||
Foxtail:
|
||
giant Setaria faberi
|
||
green robust purple,
|
||
robust white Setaria viridis
|
||
yellow Setaria lutescens C
|
||
Goosegrass
|
||
Eleusine indica C
|
||
Johnsongrass, seedling
|
||
Sorghum halepense R
|
||
Millet: foxtail
|
||
Setaria italica R
|
||
Oat, wild
|
||
Avena fatua R
|
||
Panicum:
|
||
browntop, Panicum fasciculatum
|
||
fall, Panicum dichotomiflorum C
|
||
Panicum, Texas
|
||
Panicum texanum R
|
||
Rice, red
|
||
Oryza sativa C
|
||
Sandbur; Grassbur
|
||
Cenchrus incertus R
|
||
Shattercane; Wild cane
|
||
Sorghum bicolor R
|
||
Signalgrass, broadleaf
|
||
Brachiaria platyphylla C
|
||
Sprangletop, red
|
||
Leptochloa filiformis C
|
||
Wheat, volunteer
|
||
Triticum aestivum R
|
||
Witchgrass
|
||
Panicum capillare L. C
|
||
11.2 Annual Broadleaves
|
||
Beggarweed, Florida
|
||
Desmodium tortuosum R
|
||
Carpetweed
|
||
Mollugo verticillata C
|
||
Galinsoga
|
||
Galinsoga spp. C
|
||
Groundcherry, cutleaf
|
||
Physalis angulata R
|
||
Henbit
|
||
Lamium amplexicaule C
|
||
Lambsquarters
|
||
Chenopodium album C
|
||
Nightshade,
|
||
black, Solanum nigrum
|
||
hairy, Solanum sarrachoides C
|
||
Pigweed: Carelessweed
|
||
Amaranthus spp. C
|
||
Purslane
|
||
Portulaca oleracea C
|
||
Pusley, Florida
|
||
Richardia scabra C
|
||
Sida, prickly; Teaweed
|
||
Sida spinosa R
|
||
Smartweed
|
||
Polygonum pensylvanicum R
|
||
Starbur, bristly
|
||
Acanthospermum hispidum R
|
||
Waterhemp
|
||
Amaranthus tuberculatus C
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
6
|
||
12.0 ALFALFA
|
||
12.1 Warrant Herbicide for Postemergence Use
|
||
in Alfalfa
|
||
New Stand Establishment (Seeding Year):
|
||
For fall-planted alfalfa, including Roundup Ready alfalfa, this product may
|
||
be applied at 1.25 to 2 quarts per acre up to or at the 4th-trifoliate stage
|
||
following emergence of the new stand, or following green-up or re-growth the
|
||
following spring. Wait a minimum of 20 days after application before cutting
|
||
for forage or hay, or before open grazing of forage by livestock.
|
||
For spring-planted alfalfa, including Roundup Ready alfalfa, this product
|
||
may be applied at 1.25 to 2 quarts per acre up to or at the 4th-trifoliate
|
||
stage following emergence of the new stand. Wait a minimum of 20 days
|
||
after application before cutting for forage or hay, or before open grazing of
|
||
forage by livestock.
|
||
After either the first or second cutting in the seeding year, but no later
|
||
than 7 days after the cutting, a sequential application of this product may
|
||
be made at 1.25 to 2 quarts per acre. Wait a minimum of 20 days between
|
||
application and cutting for forage or hay, or before open grazing of forage
|
||
by livestock.
|
||
Do not exceed a maximum of 2 quarts per acre of this product in any single
|
||
application.
|
||
Do not exceed a total of 3 applications of this product per alfalfa growing
|
||
season.
|
||
Do not exceed a combined total of 4 quarts (3 lbs a.i.) per acre per year in a
|
||
newly established stand (seeding year) when making multiple applications of
|
||
this product or other acetochlor containing products.
|
||
Remove domestic livestock from alfalfa stands before making applications
|
||
of this product.
|
||
Do no use this product on alfalfa grown for seed production.
|
||
Application of this product followed by conditions that do not foster adequate
|
||
stand growth or which cause stress (cold, wet soils), waterlogged conditions,
|
||
excessive irrigation or rainfall, may result in crop injury.
|
||
The user is responsible to ensure that the alfalfa stand is at a desirable level
|
||
before using Warrant Herbicide.
|
||
If Warrant Herbicide has been applied and the alfalfa stand fails due to
|
||
adverse weather or any other reasons, replanting alfalfa or sugar beet is not
|
||
recommended.
|
||
See the “Replanting and Rotational Crops” section of the main label booklet
|
||
for this product for a list of crops that may be replanted immediately.
|
||
Established Alfalfa Stands (Non-Seeding Year):
|
||
This product may be applied postemergence (in-crop) after spring green-up in
|
||
established stands of all varieties of alfalfa, including Roundup Ready alfalfa.
|
||
This product may be applied broadcast over top of the alfalfa stand according
|
||
to the rate table listed below. Applications of this product may be made
|
||
between cuttings, and no later than 7 days after a cutting, at a rate of 1.25
|
||
to 2 quarts per acre. Remove any previously cut forage or hay from the field
|
||
before making an application.
|
||
Allow a minimum of 20 days between an application and subsequent cutting
|
||
for forage or hay, or before open grazing of forage by livestock.
|
||
Do not exceed a maximum of 2 quarts (1.5 lbs a.i.) per acre of this product
|
||
as a single application.
|
||
Do not exceed a total of 3 applications of this product per alfalfa growing
|
||
season.
|
||
Do not exceed a combined total of 4 quarts (3 lbs a.i.) per acre per year in
|
||
established stands when making multiple applications of this product or other
|
||
acetochlor containing products.
|
||
The user should take care to ensure that stand is at a desirable level before
|
||
using Warrant Herbicide. If Warrant Herbicide has been applied and the stand
|
||
fails due to adverse weather or any other reasons, replanting alfalfa or sugar
|
||
beet is not recommended. See the “Replanting and Rotational Crops” section
|
||
of the label for a list of crops that may be replanted immediately.
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST APPLICATION RATES PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
12.2 Warrant Herbicide Tank-Mixtures for Postemergence Use in Alfalfa
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
application timing in alfalfa. Read and follow all applicable restrictions and
|
||
limitations and directions for use involving tank mixing on all product labels
|
||
included in the tank mixture, including any applicable crop injury precautions.
|
||
The end-user must follow the most restrictive directions for use and
|
||
precautionary statements on the labeling of each product in the tank mixture.
|
||
This product may be applied postemergence to alfalfa in a tank-mix with one
|
||
or more of the active ingredients listed below to expand weed control spectrum
|
||
or for control of emerged weeds at the time of application.
|
||
2,4-DB, clethodim, imazamox, imazethapyr
|
||
Warrant Herbicide may be applied postemergence to Roundup Ready alfalfa in
|
||
a tank-mixture with the active ingredient listed below, or one of the products
|
||
listed below.
|
||
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
|
||
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX ® 3 (EPA Reg.
|
||
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537)]
|
||
Application of Warrant Herbicide in tank mixture with products not
|
||
recommended on this label or to soils where other applications of soil applied
|
||
herbicides have been made may increase the potential for injury with this
|
||
product.
|
||
13.0 FIELD CORN, POPCORN, PRODUCTION SEED
|
||
CORN, AND SILAGE CORN
|
||
13.1 Warrant Herbicide for Preplant, At-Planting,
|
||
or Preemergence Applications in Corn
|
||
Applications of this product may be made preplant, at-planting, or preemergence
|
||
in field corn in the following listed states only, or only in other states listed on
|
||
seperately published supplemental labeling for this product:
|
||
Alabama, Arkansas, Georgia, Hawaii, Louisiana,
|
||
Mississippi, New Mexico, North Carolina, Oklahoma,
|
||
South Carolina, Tennessee, Texas, and Virginia
|
||
When applied preplant, at-planting, or preemergence in field corn and
|
||
production seed corn, including Corn Hybrids with Roundup Ready
|
||
2 Technology, this product will provide preemergence control or reduced
|
||
competition of the annual weeds listed in the “WEEDS CONTROLLED”
|
||
section of this label. If weeds are emerged at the time of application, apply a
|
||
labeled postemergence herbicide to control emerged weeds. Use of a residual
|
||
herbicide for the control of weeds not listed on this label is recommended.
|
||
Applications may be made in a tank mixture with the products listed below.
|
||
Observe all directions for use, precautions, and restrictions on the labeling of
|
||
the tank mixed postemergence herbicide or residual herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment Section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Preplant, At-planting or Preemergence Surface
|
||
Warrant Herbicide may be applied preplant, at-planting or preemergence
|
||
to field corn and production seed corn at 1.5 to 3 quarts per acre (qts/A)
|
||
according to the rate table below. Apply broadcast to the soil surface
|
||
according to the rate table listed below. Mechanical incorporation is not
|
||
recommended. This product applied alone will not control emerged weeds.
|
||
Application of this product, followed by conditions that do not favor adequate
|
||
crop growth, or which cause stress (cold, wet soils), or under waterlogged
|
||
conditions from excessive irrigation or rainfall, may result in crop response.
|
||
Do not apply if these conditions are forecast within 10 days of application.
|
||
Application of this product with other residual herbicides may increase the
|
||
potential for crop injury.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 3%
|
||
Organic Matter (quarts)
|
||
3% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.5 to 2.0 2.0
|
||
Medium 1.5 to 2.75 2.0 to 2.75
|
||
Fine 1.5 to 2.75 2.75 to 3.0
|
||
*Use the higher rate in the range for areas of heavy weed infestation.
|
||
13.2 Warrant Herbicide Tank Mixtures for
|
||
Preplant, At-Planting, or Preemergence Use
|
||
in Corn
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific preplant or
|
||
preemergence application timing in corn. Read and follow all applicable
|
||
restrictions and limitations and directions for use involving tank mixing on
|
||
all product labels included in the tank mixture, including any applicable crop
|
||
injury precautions. The end-user must follow the most restrictive directions
|
||
for use and precautionary statements on the labeling of each product in the
|
||
tank mixture.
|
||
This product may be applied preplant, at-planting or preemergence in a tank-
|
||
mixture with one or more of the active ingredients listed below, or one or more
|
||
of the products listed below, for improved residual weed control spectrum
|
||
in field corn:
|
||
2,4-D, atrazine, carfentrazone-ethyl, dicamba, diflufenzopyr, flumiclorac
|
||
pentyl ester, glyphosate, isoxaflutole, linuron, mesotrione, paraquat,
|
||
pendimethalin, simazine, thiencarbazone-methyl,
|
||
Balance ® Flexx (EPA Reg. No. 264-1067), Corvus ® (EPA Reg. No.
|
||
264-1066), DiFlexx™ (EPA Reg. No. 264-1173), Roundup PowerMAX ®
|
||
(EPA Reg. No. 524-549), Roundup PowerMAX® II (EPA Reg. No. 524-537),
|
||
Roundup PowerMAX® 3 (EPA Reg. No. 524-659), Roundup WeatherMAX ®
|
||
(EPA Reg. No.524-537)
|
||
13.3 Warrant Herbicide for Postemergence Use in
|
||
Field Corn
|
||
This product, when applied postemergence in field corn and production seed corn,
|
||
including Corn Hybrids with Roundup Ready 2 Technology, as one or two applications, will
|
||
provide preemergence control or reduced competition of the annual grasses and broadleaf
|
||
weeds listed in the “WEEDS CONTROLLED” section of this label. If weeds are emerged at
|
||
time of application, apply a labeled postemergence herbicide with this product to control
|
||
the emerged weeds. Observe the directions for use, precautions and restrictions on the
|
||
label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment Section of this label for
|
||
additional information.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
7
|
||
Approved Application Methods
|
||
Postemergence Surface
|
||
Apply this product prior to weed emergence in emerged field corn, including Corn Hybrids
|
||
with Roundup Ready 2 Technology. The product may be applied from seedling emergence
|
||
until the corn reaches 30 inches in height. Directed spray may be used to minimize
|
||
interference of spray by crop and to increase soil coverage. Drop nozzles will provide
|
||
optimum spray coverage and weed control when corn height is 24 to 30 inches. Use rates
|
||
are defined in the table below. Use the higher rate on larger weeds and where heavy weed
|
||
infestations exist. Weeds emerged at the time of application are not controlled by this
|
||
product. If weeds are emerged at application, apply a labeled postemergence herbicide
|
||
with this product to control the emerged weeds, or shallowly cultivate or rotary hoe to
|
||
improve performance. See section of this label for recommended tank mix products for
|
||
postemergence applications in field corn.
|
||
Apply Warrant Herbicide broadcast over-the-top or directed to the soil surface, according to
|
||
the rate table listed below. An application before weeds emerge, or after clean cultivation
|
||
is necessary as this product will not control emerged weeds.
|
||
DO NOT apply Warrant Herbicide on sweet corn.
|
||
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year of acetochlor when making
|
||
multiple applications.
|
||
DO NOT make postemergence surface applications using sprayable fluid fertilizer as the
|
||
carrier because severe crop injury may occur.
|
||
DO NOT graze treated area or feed treated forage to livestock for 40 days following
|
||
application of this product.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 3%
|
||
Organic Matter (quarts)
|
||
3% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.5 to 2.0 2.0
|
||
Medium 1.5 to 2.75 2.0 to 2.75
|
||
Fine 1.5 to 2.75 2.75 to 3.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
13.4 Warrant Herbicide Tank-Mixtures for
|
||
Postemergence Use in Corn (All Types)
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
application timing in corn. Read and follow all applicable restrictions and
|
||
limitations and directions for use on all product labels included in the tank
|
||
mixture, including any applicable crop injury precautions. The end-user must
|
||
follow the most restrictive directions for use and precautionary statements on
|
||
the labeling of each product in the tank mixture.
|
||
This product may be tank-mixed with one or more of the active ingredients
|
||
listed below, or one or more of the products listed below, for postemergence
|
||
applications in corn (all types):
|
||
2,4-D, atrazine, carfentrazone-ethyl, clopyralid, dicamba, diflufenzopyr,
|
||
flumetsulam, flumiclorac pentyl ester, isoxaflutole, mesotrione,
|
||
tembotrione, thiencarbazone-methyl, topramezone,
|
||
Balance® Flexx (EPA Reg. No. 264-1067), Capreno ® (EPA Reg. No.
|
||
264-1063), Corvus ® (EPA Reg. No. 264-1066), DiFlexx™ (EPA Reg. No.
|
||
264-1173), DiFlexx™ DUO (EPA Reg. No. 264-1184), Laudis ® (EPA Reg.
|
||
No. 264-860)]
|
||
This product may be applied postemergence to corn in a tank-mixture with the
|
||
active ingredient listed below, or one of the products listed below, when used
|
||
on field corn hybrids with Roundup Ready 2 Technology.
|
||
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
|
||
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
|
||
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537)
|
||
14.0 COTTON
|
||
14.1 Warrant Herbicide for Preplant,
|
||
At-Planting, or Preemergence Use in Cotton
|
||
When applied preplant, at-planting, or preemergence to cotton, as one or
|
||
two applications, this product will provide preemergence control or reduced
|
||
competition of the annual grasses and broadleaf weeds listed in the “WEEDS
|
||
CONTROLLED” section of this label. If weeds are emerged at time of
|
||
application apply a labeled postemergence herbicide with this product to
|
||
control the emerged weeds. Use of a residual herbicide for the control of
|
||
weeds not listed on this label is recommended. Applications may be made
|
||
in a tank mixture with the products listed below. Observe the directions for
|
||
use, precautions and restrictions on the label of the tank mixture herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Preplant, At-planting or Preemergence Surface
|
||
Warrant Herbicide may be applied preplant, at-planting or preemergence to
|
||
cotton at 1.25 to 2 quarts per acre (qts/A) according to the rate table below.
|
||
The optimum rate of application is 1.5 qts/A. Apply broadcast to the soil
|
||
surface according to the rate table listed below. Mechanical incorporation is
|
||
not recommended. This product will not control emerged weeds.
|
||
Application of this product with other postemergence or soil applied herbicides
|
||
may increase the potential for crop injury.
|
||
Application of this product followed by conditions that do not favor adequate
|
||
crop growth or which cause stress (cold, wet soils), or under waterlogged
|
||
conditions from excessive irrigation or rainfall, may result in crop injury.
|
||
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making a
|
||
second application, including a postemergence application in cotton.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
14.2 Warrant Herbicide Tank Mixtures for
|
||
Preplant, At-Planting, or Preemergence Use
|
||
in Cotton
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific pre-plant or
|
||
preemergence application timing in cotton. Read and follow all applicable
|
||
restrictions and limitations and directions for use involving tank mixing on
|
||
all product labels included in the tank mixture, including any applicable crop
|
||
injury precautions. The end-user must follow the most restrictive directions
|
||
for use and precautionary statements on the labeling of each product in the
|
||
tank mixture.
|
||
This product may be tank mixed with one or more of the active ingredients
|
||
listed below, or one of the products listed below, when applied preplant, at-
|
||
planting, or preemergence in cotton.
|
||
diuron, fluometuron, flumioxazin, fomesafen, glyphosate, paraquat,
|
||
pendimethalin, prometryn, pyrithiobac-sodium,
|
||
Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup PowerMAX ®
|
||
II (EPA Reg. No. 524-537), Roundup PowerMAX ® 3 (EPA Reg. No.
|
||
524-659), Roundup WeatherMAX® (EPA Reg. No.524-537), RT 3®
|
||
(EPA Reg. No. 524-544)
|
||
14.3 Warrant Herbicide for Postemergence Use
|
||
in Cotton
|
||
When applied postemergence to cotton, as one or two applications, this
|
||
product will provide preemergence control or reduced competition of the
|
||
annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED”
|
||
section of this label. If weeds are emerged at time of application apply a
|
||
labeled postemergence herbicide with this product to control the emerged
|
||
weeds. Use of a residual herbicide for the control of weeds not listed on this
|
||
label is recommended. See sections of this label for recommended tank mix
|
||
products for postemergence applications in cotton. Observe the directions for
|
||
use, precautions and restrictions on the label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only - see
|
||
Aerial Application Equipment section of this label for additional
|
||
information.
|
||
Approved Application Methods
|
||
Postemergence Surface
|
||
Apply this product postemergence to cotton and prior to weed emergence.
|
||
The application should be made after cotton is completely emerged but
|
||
before cotton reaches first bloom. Apply this product when crop is small or
|
||
direct spray to the soil surface to minimize interference of spray by crop. The
|
||
optimum timing and rate of application is when cotton is in 2 to 3 leaf stage
|
||
or prior to weed emergence at 1.5 qts/A. Directed applications may be used
|
||
to increase soil coverage and canopy penetration after cotton reaches 5 to
|
||
6 leaf stage. Use rates are defined in the table below. Use the higher
|
||
rate where heavy weed infestations exist. Weeds emerged at the time
|
||
of application are not controlled by this product. If weeds are emerged at
|
||
application, apply a labeled postemergence herbicide with this product to
|
||
control the emerged weeds or shallowly cultivate or rotary hoe to improve
|
||
performance. See sections of this label for recommended tank mix products
|
||
for postemergence over-the-top and post-direct applications in cotton.
|
||
Apply this product broadcast over-the-top or directed to the soil surface,
|
||
according to the rate table listed below. Application before weeds emerge, or
|
||
after clean cultivation is necessary as this product will not control emerged
|
||
weeds.
|
||
In sprinkler-irrigated areas, sprinkler irrigate after application with
|
||
1/2-3/4 inch of water (½ inch on coarse-textured soils to 3/4 inch on
|
||
fine-textured soils) to incorporate product. In furrow-irrigated areas, apply
|
||
product, incorporate with a rolling cultivator or similar implement that
|
||
provides uniform shallow incorporation (2 inches or less), and then irrigate.
|
||
In non-irrigated areas, if at least ½ inch of rainfall does not occur within
|
||
10 days after application, cultivate with a rolling cultivator or similar
|
||
implement that provides shallow incorporation of the product.
|
||
DO NOT make postemergence surface applications using sprayable fluid
|
||
fertilizer as the carrier because severe crop injury may occur.
|
||
DO NOT graze treated area or feed treated cotton forage to livestock following
|
||
application of this product.
|
||
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making
|
||
a second application.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
8
|
||
14.4 Warrant Herbicide Additional Tank-Mixtures
|
||
for Postemergence Over-The-Top Use
|
||
in Cotton
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
application timing in cotton. Read and follow all applicable restrictions and
|
||
limitations and directions for use involving tank mixing on all product labels
|
||
included in the tank mixture, including any applicable crop injury precautions.
|
||
The end-user must follow the most restrictive directions for use and
|
||
precautionary statements on the labeling of each product in the tank mixture.
|
||
This product may be tank-mixed with one or more of the active ingredients
|
||
listed below when applied postemergence over-the-top in cotton:
|
||
clethodim, fluazifop-P-butyl, pyrithiobac sodium, quizalofop-P-ethyl,
|
||
trifloxysulfuron-sodium.
|
||
This product may be applied over-the-top postemergence to cotton in a tank-
|
||
mixture with one or more of the active ingredients listed below, or one or more
|
||
of the products listed below, when used on cotton with XtendFlex® technology
|
||
glufosinate-ammonium, glyphosate
|
||
Liberty® (EPA Reg. No. 7969-448), Roundup PowerMAX ® (EPA Reg. No.
|
||
524-549), Roundup PowerMAX ® II (EPA Reg. No. 524-537), Roundup
|
||
PowerMAX ® 3 (EPA Reg. No. 524-659), Roundup WeatherMAX ®
|
||
(EPA Reg. No.524-537)
|
||
14.5 Warrant Herbicide Tank-Mixtures for
|
||
Post-Directed Use in Cotton
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific post-directed
|
||
application timing in cotton. Read and follow all applicable restrictions and
|
||
limitations and directions for use involving tank mixing on all product labels
|
||
included in the tank mixture, including any applicable crop injury precautions.
|
||
The end-user must follow the most restrictive directions for use and
|
||
precautionary statements on the labeling of each product in the tank mixture.
|
||
This product may be tank-mixed with one or more of the active ingredients
|
||
listed below, or one of the products listed below, when applied post-directed
|
||
in cotton:
|
||
carfentrazone-ethyl, diuron, flumioxazin, glufosinate-ammonium,
|
||
glyphosate, MSMA, prometryn, pyrithiobac sodium, trifloxysulfuron-sodium
|
||
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
|
||
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
|
||
Roundup WeatherMAX® (EPA Reg. No.524-537).
|
||
15.0 PEANUT
|
||
15.1 Warrant Herbicide for Preplant, At-Planting,
|
||
or Preemergence Use in Peanut
|
||
This product, when applied preplant, at-planting, or preemergence in peanut will
|
||
provide preemergence control or reduced competition of the annual weeds listed
|
||
in the “WEEDS CONTROLLED” section of this label. If weeds are emerged at the
|
||
time of application, apply a labeled postemergence herbicide with this product
|
||
to control the emerged weeds. Observe the directions for use, precautions, and
|
||
restrictions on the label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Preplant, At-planting, or Preemergence Surface
|
||
This product may be applied preplant, at-planting, or preemergence to peanut at
|
||
1.25 to 2 quarts (0.94 to 1.5 lbs a.i.) per acre. Apply broadcast to the soil surface
|
||
according to the rate table listed below.
|
||
Application of Warrant Herbicide followed by conditions that do not foster
|
||
adequate crop growth, or cause stress (cold, wet soils), waterlogged
|
||
conditions, excessive irrigation or rainfall, may result in crop injury.
|
||
Application made before weeds emerge, or after clean cultivation, is
|
||
necessary, as this product will not control emerged weeds.
|
||
DO NOT exceed a total of 4 quarts (3 lbs acetochlor) per acre per season when
|
||
making multiple applications.
|
||
Do not exceed a total of 3 applications per season.
|
||
Allow a minimum of 90 days between last application and grazing or feeding
|
||
of peanut hay to livestock.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
*Use the higher rate in the range for areas of heavy weed infestation.
|
||
15.2 Warrant Herbicide Tank Mixtures for
|
||
Preplant, At-Planting, or Preemergence Use
|
||
in Peanut
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific preplant or
|
||
preemergence application timing in peanut. Read and follow all applicable
|
||
restrictions and limitations and directions for use involving tank mixing on
|
||
all product labels included in the tank mixture, including any applicable crop
|
||
injury precautions. The end-user must follow the most restrictive directions
|
||
for use and precautionary statements on the labeling of each product in the
|
||
tank mixture.
|
||
This product may be applied early preplant or preemergence to peanut in a
|
||
tank-mixture with one or more of the active ingredients listed below, or one
|
||
of the products listed below:
|
||
diclosulam, ethalfluralin, flumioxazin, glyphosate, paraquat, pendimethalin,
|
||
trifluralin
|
||
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
|
||
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
|
||
Roundup WeatherMAX® (EPA Reg. No.524-537)
|
||
Preplant soil incorporated applications together with Prowl ® H2O (EPA Reg.
|
||
No. 241-418), Sonalan® HFP (EPA Reg. No. 101063-356), Strongarm® (EPA
|
||
Reg. No. 62719-288), or Treflan ® 4EC (EPA Reg. No. 5905-532) are not
|
||
recommended due to risk of crop injury and reduced weed control.
|
||
Application of Warrant Herbicide in a tank mixture with other products, or to
|
||
soils where other applications of soil applied herbicides have been made, may
|
||
increase the potential for injury with this product.
|
||
15.3 Warrant Herbicide for Postemergence Use
|
||
in Peanut
|
||
This product, when applied postemergence in peanut will provide
|
||
preemergence control or reduced competition of the annual weeds listed in
|
||
the “WEEDS CONTROLLED” section of this label. If weeds are emerged at the
|
||
time of application, apply a labeled postemergence herbicide with this product
|
||
to control the emerged weeds. Observe the directions for use, precautions,
|
||
and restrictions on the label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Postemergence Surface
|
||
Warrant Herbicide may be applied postemergence to peanut at 1.25 to
|
||
2 quarts per acre after crop emergence up through the R1 growth stage
|
||
(beginning bloom). R1 ends as 50% of the plants in an area have a visible
|
||
peg (R2). Apply broadcast over the top of the crop or directed to the soil
|
||
surface according to the rate table listed below. Do not exceed 2 quarts
|
||
(1.5 lbs a.i.) per acre as a single application. Allow at least 7 days between
|
||
sequential applications.
|
||
Application of Warrant Herbicide followed by conditions that do not foster
|
||
adequate crop growth, or cause stress (cold, wet soils), waterlogged
|
||
conditions, excessive irrigation or rainfall, may result in crop injury.
|
||
Application made before weeds emerge, or after clean cultivation, is
|
||
necessary, as this product will not control emerged weeds.
|
||
DO NOT exceed a total of 4 quarts (3 lbs acetochlor) per acre per season when
|
||
making multiple applications.
|
||
Do not exceed a total of 3 applications per season.
|
||
Allow a minimum of 90 days between last application and grazing or feeding
|
||
of peanut hay to livestock.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
*Use the higher rate in the range for areas of heavy weed infestation.
|
||
15.4 Warrant Herbicide Tank-Mixtures for
|
||
Postemergence Use in Peanut
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
application timing in peanut. Read and follow all applicable restrictions and
|
||
limitations and directions for use involving tank mixing on all product labels
|
||
included in the tank mixture, including any applicable crop injury precautions.
|
||
The end-user must follow the most restrictive directions for use and
|
||
precautionary statements on the labeling of each product in the tank mixture.
|
||
This product may be applied postemergence to peanut in a tank-
|
||
mixture with one or more of the active ingredients listed below:
|
||
2,4-DB, aciflurofen, bentazon, imazapic, lactofen, paraquat]
|
||
Application of Warrant Herbicide in a tank mixture with other products
|
||
or to soils where other applications of soil applied herbicides have
|
||
been made, may increase the potential for injury with this product.
|
||
16.0 Forage or Grain Sorghum (Milo)
|
||
16.1 Warrant Herbicide Preplant Incorporated,
|
||
Preemergence, or Postemergence in Sorghum
|
||
This product, when applied preplant incorporated, preemergence, or
|
||
postemergence in sorghum, as one or two applications, will provide
|
||
preemergence control or reduced competition of the annual grasses and
|
||
broadleaf weeds listed in the “WEEDS CONTROLLED” section of the label.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
9
|
||
If weeds are emerged at time of application, apply a labeled postemergence
|
||
herbicide with this product to control the emerged weeds. Observe
|
||
the directions for use, precautions and restrictions on the label of the
|
||
postemergence herbicide.
|
||
Preplant Incorporated and preemergence applications of this product must be
|
||
made ONLY to sorghum planted with seed that has been properly treated with
|
||
seed protectant or safener. Application rates from the table below should be
|
||
based on the soil texture and the tolerance of the sorghum hybrid.
|
||
NOTE: In Texas, use only in the Panhandle area and the fine-textured soils of
|
||
the Gulf Coast and the Blacklands. In the Texas Panhandle and Oklahoma
|
||
Panhandle, do not apply preplant incorporated.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only - see
|
||
Aerial Application Equipment section of this label for more
|
||
information.
|
||
Approved Application Methods
|
||
Preplant Incorporated; Preemergence Surface; Postemergence Surface
|
||
Apply this product preplant incorporated, preemergence, or postemergence
|
||
to sorghum before the crop exceeds 11 inches in height (in general, 5 to
|
||
6 leaf sorghum). This product will not control emerged weeds, therefore,
|
||
emerged weeds must be controlled by a labeled postemergence herbicide or
|
||
cultural means. If sorghum seed is not properly treated with seed protectant
|
||
or safener, preplant and preemergence applications of Warrant Herbicide will
|
||
severely injure the crop.
|
||
DO NOT exceed 4 quarts (3 lbs acetochlor) per acre per year when making
|
||
multiple applications.
|
||
DO NOT make postemergence surface applications using sprayable fluid
|
||
fertilizer as the carrier, because severe crop injury may occur.
|
||
DO NOT graze treated area or feed treated sorghum forage to livestock for
|
||
60 days following application of this product.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE
|
||
Warrant Herbicide*
|
||
(quarts)
|
||
Less than 1.5%
|
||
organic matter
|
||
Warrant Herbicide*
|
||
(quarts)
|
||
1.5% or more
|
||
organic matter
|
||
Coarse 1.5 to 2.25 2.0 to 2.5
|
||
Medium 1.5 to 2.25 2.0 to 3.0
|
||
Fine 1.5 to 2.5 2.25 to 3.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
16.2 Warrant Herbicide Tank-Mixtures
|
||
for Preplant Incorporated,
|
||
Preemergence, or Postemergence
|
||
Use in Sorghum
|
||
It is the applicator’s responsibility to ensure that all products used in a tank
|
||
mixture with this product are registered for the specific application timing
|
||
in sorghum. Read and follow all applicable restrictions and limitations and
|
||
directions for use involving tank mixing on all product labels included in the
|
||
tank mixture, including any applicable crop injury precautions. The end-
|
||
user must follow the most restrictive directions for use and precautionary
|
||
statements on the labeling of each product in the tank mixture.
|
||
This product may be applied preplant incorporated, preemergence, or
|
||
postemergence to sorghum in a tank-mixture with one or more of the active
|
||
ingredients listed below, or one of the products listed below:
|
||
2,4-D, atrazine, bromoxynil, dicamba, pyrasulfotole,
|
||
Husky (EPA Reg. No. 264-1023).
|
||
17.0 SOYBEAN
|
||
17.1 Warrant Herbicide for Preplant,
|
||
At-Planting, or Preemergence Use
|
||
in Soybean
|
||
When applied preplant, at-planting, or preemergence in soybean, this product
|
||
will provide preemergence control or reduced competition of the annual
|
||
weeds listed in the “WEEDS CONTROLLED” section of this label. If weeds are
|
||
emerged at the time of application, apply a labeled postemergence herbicide
|
||
to control emerged weeds. Use of a residual herbicide for the control of weeds
|
||
not listed on this label is recommended. Applications may be made in a
|
||
tank mixture with the products listed below. Observe all directions for use,
|
||
precautions, and restrictions on the labeling of the tank mixed postemergence
|
||
herbicide or residual herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Preplant, At-planting or Preemergence Surface
|
||
Warrant Herbicide may be applied preplant, at-planting or preemergence to
|
||
soybean at 1.25 to 2 quarts per acre (qts/A) according to the rate table below.
|
||
The optimum rate of application is 1.5 qts/A. Apply broadcast to the soil
|
||
surface according to the rate table listed below. Mechanical incorporation is
|
||
not recommended. This product will not control emerged weeds.
|
||
Application of this product with other postemergence or soil applied herbicides
|
||
may increase the potential for crop injury.
|
||
Application of this product followed by conditions that do not favor adequate
|
||
crop growth or which cause stress (cold, wet soils), or under waterlogged
|
||
conditions from excessive irrigation or rainfall, may result in crop injury.
|
||
DO NOT exceed 4 quarts per acre per year when making a second application,
|
||
including a postemergence application to soybeans.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter
|
||
(quarts)
|
||
1.5% or More
|
||
Organic Matter
|
||
(quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
17.2 Warrant Herbicide Tank Mixtures
|
||
for Preplant, At-Planting, or
|
||
Preemergence Use in Soybean
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific pre-plant or
|
||
preemergence application timing in soybean. Read and follow all applicable
|
||
restrictions and limitations and directions for use involving tank mixing on
|
||
all product labels included in the tank mixture, including any applicable crop
|
||
injury precautions. The end-user must follow the most restrictive directions
|
||
for use and precautionary statements on the labeling of each product in the
|
||
tank mixture.
|
||
This product may be applied preplant, at-planting, or preemergence in
|
||
soybean in a tank-mixture with one or more of the active ingredients listed
|
||
below, or one of the products listed below.
|
||
chlorimuron-ethyl, cloransulam-methyl, fomesafen, glyphosate,
|
||
imazethapyr, metribuzin, paraquat, pendimethalin,
|
||
Roundup PowerMAX® (EPA Reg. No. 524-549), Roundup PowerMAX ® II
|
||
(EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg. No. 524-659),
|
||
Roundup WeatherMAX® (EPA Reg. No.524-537), RT 3® (EPA Reg. No.
|
||
524-544).
|
||
In the following states only:
|
||
Alabama, Arkansas, Delaware, Georgia, Illinois, Indiana, Kansas, Kentucky,
|
||
Louisiana, Maryland, Mississippi, Missouri, Nebraska, North Carolina, Ohio,
|
||
Oklahoma, South Carolina, Tennessee, Texas, and Virginia,
|
||
this product may be tank mixed with the following active ingredients when
|
||
applied preplant, at-planting, or preemergence in soybean, including Roundup
|
||
Ready Soybeans and Roundup Ready 2 Yield Soybeans.
|
||
Conventional Tillage Conditions:
|
||
For soybeans planted under conventional tillage conditions this product may
|
||
be tank mixed with the following products and applied preplant up to 14 days
|
||
prior to planting.
|
||
No-Till or Minimum Tillage Conditions:
|
||
In soybeans planted under no-till or minimum tillage conditions on wheat
|
||
stubble or non-till field corn stubble this product may be tank mixed with
|
||
the following products and applied preplant, at-planting, or preemergence:
|
||
Flumioxazin.
|
||
Applications of this product in the tank mixtures allowed above followed by
|
||
cool wet weather conditions may result in crop injury
|
||
17.3 Warrant Herbicide for
|
||
Postemergence Use in Soybean
|
||
This product, when applied postemergence in soybeans, as one or two
|
||
applications, will provide preemergence control or reduced competition of the
|
||
annual grasses and broadleaf weeds listed in the “WEEDS CONTROLLED”
|
||
section of this label. If weeds are emerged at time of application, apply a
|
||
labeled postemergence herbicide with this product to control the emerged
|
||
weeds. See section of this label for recommended tank mix products for
|
||
postemergence applications in soybeans. Observe the directions for use,
|
||
precautions and restrictions on the label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Postemergence Surface
|
||
Apply this product postemergence to soybeans and prior to weed emergence.
|
||
The application should be made after soybeans are completely emerged but
|
||
before soybeans reach growth stage R2. Apply this product when crop is small
|
||
or direct spray to the soil surface to minimize interference of spray by crop.
|
||
The optimum timing and rate of application is when soybeans are V2-V3 at
|
||
1.5 qts/A. Directed applications may be used to increase soil coverage and
|
||
canopy penetration after soybean growth stage V5. Use rates are defined in
|
||
the table below. Use the higher rate where heavy weed infestations exist.
|
||
Weeds emerged at the time of application are not controlled by this product.
|
||
If weeds are emerged at application, apply a labeled postemergence herbicide
|
||
with this product to control the emerged weeds or shallowly cultivate or rotary
|
||
hoe to improve performance. See section of this label for recommended tank
|
||
mix products for postemergence applications in soybeans.
|
||
Apply Warrant Herbicide broadcast over-the-top or directed to the soil
|
||
surface, according to the rate table listed below. Application made before
|
||
weeds emerge or after clean cultivation is necessary as this product will not
|
||
control emerged weeds.
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
10
|
||
DO NOT exceed 4 quarts (3 lbs. acetochlor) per acre per year when making
|
||
a second application.
|
||
DO NOT make postemergence surface applications using sprayable fluid
|
||
fertilizer as the carrier because severe crop injury may occur.
|
||
DO NOT graze treated area or feed treated soybean forage to livestock
|
||
following application of this product.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter
|
||
(quarts)
|
||
1.5% or More
|
||
Organic Matter
|
||
(quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
17.4 Warrant Herbicide Tank-Mixtures for
|
||
Applications Postemergence to Soybean
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
(in-crop) application timing in soybean. Read and follow all applicable
|
||
restrictions and limitations and directions for use involving tank mixing on
|
||
all product labels included in the tank mixture, including any applicable crop
|
||
injury precautions. The end-user must follow the most restrictive directions
|
||
for use and precautionary statements on the labeling of each product in the
|
||
tank mixture.
|
||
This product may be applied in a tank-mixture with the following products
|
||
postemergence to soybean.
|
||
acifluorfen, bentazon, chlorimuron ethyl, clethodim, cloransulam-methyl,
|
||
fenoxaprop-P-ethyl, fluazifop-P-butyl, fomesafen, imazamox, imazethapyr,
|
||
lactofen, quizalofop-P-ethyl
|
||
This product may be applied postemergence to soybean in a tank-mixture
|
||
with the active ingredient listed below, or one of the products listed below,
|
||
when used on Roundup Ready Soybean, Roundup Ready 2 Yield Soybean, and
|
||
Roundup Ready 2 Xtend® Soybean.
|
||
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
|
||
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
|
||
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537).
|
||
18.0 SUGAR BEET
|
||
18.1 Warrant Herbicide for Postemergence Use
|
||
in Sugar Beet
|
||
This product, when applied postemergence in sugar beet, will provide
|
||
preemergence control or reduced competition of the annual weeds listed in
|
||
the “WEEDS CONTROLLED” section of this label. If weeds are emerged at the
|
||
time of application, apply a labeled postemergence herbicide with this product
|
||
to control the emerged weeds. Observe the directions for use, precautions,
|
||
and restrictions on the label of the postemergence herbicide.
|
||
Approved Application Systems
|
||
Ground: Broadcast boom
|
||
Aerial: Fixed-wing and helicopter. Allowed in selected states only -
|
||
see Aerial Application Equipment section of this label for
|
||
additional information.
|
||
Approved Application Methods
|
||
Postemergence Surface
|
||
Warrant Herbicide may be applied postemergence to sugar beet at 1.25 to
|
||
2 quarts per acre from the 2 leaf up to the 8-leaf stage, with the 4-leaf stage
|
||
being the ideal timing. Apply broadcast over the top of the crop or directed
|
||
to the soil surface according to the rate table listed below. Do not exceed
|
||
2 quarts (1.5 lbs a.i.) per acre as a single application. Allow at least 7 days
|
||
between sequential applications.
|
||
Application of this product followed by conditions that do not foster adequate
|
||
crop growth, or cause stress (cold, wet soils), waterlogged conditions,
|
||
excessive irrigation or rainfall, may result in crop injury.
|
||
Application of this product followed by conditions that result in loss of sugar
|
||
beet stand may result in significant crop injury when a subsequent sugar
|
||
beet crop is replanted into the treated area. User should take care to ensure
|
||
that crop stand is at a desirable level before using Warrant Herbicide. If this
|
||
product has been applied and the crop fails because of adverse weather or
|
||
any other reason, immediate replanting of sugar beet is not recommended. A
|
||
crop that is approved for preemergence application on the Warrant Herbicide
|
||
label may be replanted if the sugar beet stand is lost.
|
||
Application of this product made before weeds emerge or after clean
|
||
cultivation, or application in a labeled tank-mix with an effective
|
||
postemergence herbicide, is necessary, as Warrant Herbicide will not control
|
||
emerged weeds.
|
||
DO NOT exceed a total of 4 quarts (3 lbs. acetochlor) per acre per season
|
||
when making multiple applications.
|
||
Do not exceed a total of 3 applications per season in sugar beet.
|
||
Allow a minimum of 70 days between last application and harvest of sugar
|
||
beet and grazing or feeding of sugar beet tops to livestock.
|
||
Application Rates (minimum and maximum range)
|
||
SOIL TEXTURAL
|
||
GROUP
|
||
BROADCAST RATE PER ACRE*
|
||
Less than 1.5%
|
||
Organic Matter (quarts)
|
||
1.5% or More
|
||
Organic Matter (quarts)
|
||
Coarse 1.25 to 1.6 1.25 to 1.7
|
||
Medium 1.25 to 1.7 1.25 to 1.9
|
||
Fine 1.25 to 1.9 1.25 to 2.0
|
||
* Use the higher rate in the range for areas of heavy weed infestation.
|
||
18.2 Warrant Herbicide Tank-Mixtures for
|
||
Postemergence Use in Sugar Beet
|
||
It is the applicator’s responsibility to ensure that all products used in a
|
||
tank mixture with this product are registered for the specific postemergence
|
||
application timing in sugar beet. Read and follow all applicable restrictions
|
||
and limitations and directions for use involving tank mixing on all product
|
||
labels included in the tank mixture, including any applicable crop injury
|
||
precautions. The end-user must follow the most restrictive directions for use
|
||
and precautionary statements on the labeling of each product in the tank
|
||
mixture.
|
||
This product may be applied in a tank-mixture postemergence to sugar beet
|
||
(all types) with one or more of the active ingredients listed below, or the
|
||
product listed below:
|
||
clethodim, clopyralid, ethofumesate, triflusulfuron methyl,
|
||
Nortron® SC (EPA Reg. No. 264-613).
|
||
This product may be applied postemergence to sugar beet in a tank-mixture
|
||
with the active ingredient listed below, or one of the products listed below,
|
||
when used on Roundup Ready® Sugar beet.
|
||
glyphosate, Roundup PowerMAX ® (EPA Reg. No. 524-549), Roundup
|
||
PowerMAX® II (EPA Reg. No. 524-537), Roundup PowerMAX® 3 (EPA Reg.
|
||
No. 524-659), Roundup WeatherMAX® (EPA Reg. No.524-537).
|
||
Application of this product in tank mixtures with other products, including with
|
||
adjuvants, or to soils where other applications of soil applied herbicides have
|
||
been made, may increase the potential for crop injury.
|
||
19.0 LIMIT OF WARRANTY AND LIABILITY
|
||
This Company warrants that this product conforms to the chemical
|
||
description on the label and is reasonably fit for the purposes set forth in
|
||
the Complete Directions for Use label booklet (“Directions”) when used in
|
||
accordance with those Directions under the conditions described therein.
|
||
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, NO OTHER EXPRESS
|
||
WARRANTY OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE
|
||
OR MERCHANTABILITY IS MADE. This warranty is also subject to the
|
||
conditions and limitations stated herein.
|
||
To the extent consistent with applicable law, buyer and all users shall promptly
|
||
notify this Company of any claims whether based in contract, negligence,
|
||
strict liability, other tort or otherwise.
|
||
Buyer and all users are responsible for all loss or damage from use or handling
|
||
which results from conditions beyond the control of this Company to the extent
|
||
consistent with applicable law, including, but not limited to, incompatibility
|
||
with products other than those set forth in the Directions, unusual weather,
|
||
weather conditions which are outside the range considered normal at the
|
||
application site and for the time period when the product is applied, as well
|
||
as weather conditions which are outside the application ranges set forth in the
|
||
Directions, application in any manner not explicitly set forth in the Directions,
|
||
moisture conditions outside the moisture range specified in the Directions, or
|
||
the presence of products other than those set forth in the Directions in or on
|
||
the soil, crop or treated vegetation.
|
||
This Company does not warrant any product reformulated or repackaged
|
||
from this product except in accordance with this Company’s stewardship
|
||
requirements and with express written permission from this Company.
|
||
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY
|
||
OF THE USER OR BUYER, AND THE LIMIT OF THE LIABILITY OF THIS COMPANY
|
||
OR ANY OTHER SELLER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES
|
||
RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT (INCLUDING
|
||
CLAIMS BASED IN CONTRACT, NEGLIGENCE, STRICT LIABILITY , OTHER TORT
|
||
OR OTHERWISE) SHALL BE THE PURCHASE PRICE PAID BY THE USER OR
|
||
BUYER FOR THE QUANTITY OF THIS PRODUCT INVOLVED, OR, AT THE
|
||
ELECTION OF THIS COMPANY OR ANY OTHER SELLER, THE REPLACEMENT
|
||
OF SUCH QUANTITY , OR, IF NOT ACQUIRED BY PURCHASE, REPLACEMENT
|
||
OF SUCH QUANTITY . TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, IN
|
||
NO EVENT SHALL THIS COMPANY OR ANY OTHER SELLER BE LIABLE FOR ANY
|
||
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.
|
||
Buyer and all users are deemed to have accepted the terms of this LIMIT OF
|
||
WARRANTY AND LIABILITY which may not be varied by any verbal or written
|
||
agreement.
|
||
Warrant, Roundup, and Roundup Ready are trademarks of Bayer Group. All
|
||
other trademarks are the property of their respective owners.
|
||
EPA Reg. No. 524-591
|
||
In case of an emergency involving this product,
|
||
Call Collect, day or night, 1-800-334-7577.
|
||
Packed For:
|
||
Bayer CropScience LP
|
||
800 N. Lindbergh Blvd.
|
||
St. Louis, Missouri 63167
|
||
©2021 Bayer Group. All rights reserved.
|
||
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
11
|
||
7.125”
|
||
6.875”
|
||
6.495”
|
||
COPY AREA
|
||
COPY AREA
|
||
6.625”
|
||
|
||
200618Cv2
|
||
2D
|
||
CODE
|
||
NET 2.5 GAL
|
||
Warrant Herbicide is an encapsulated herbicide for weed control in Alfalfa, Field Corn, Popcorn,
|
||
Production Seed Corn, Silage Corn, Cotton, Peanut, Forage or Grain Sorghum (Milo), Soybean,
|
||
and Sugar Beet.
|
||
ACTIVE INGREDIENT:
|
||
*Acetochlor ..................................................................................................................... 33.0%
|
||
OTHER INGREDIENTS ........................................................................................................ 67.0%
|
||
100.0%
|
||
*Contains 359 grams/liter or 3.0 pounds/gallon of 2-chloro-
|
||
N-ethoxymethyl-N-(2-ethyl-6-methylphenyl) acetamide.
|
||
EPA Reg. No. 524-591 EPA Est. No. 524-IA-1
|
||
Keep out of reach of children.
|
||
CAUTION!
|
||
See label booklet for COMPLETE DIRECTIONS FOR USE
|
||
SHAKE WELL BEFORE USING
|
||
FIRST AID: Call a poison control center or doctor for treatment advice.
|
||
IF ON
|
||
SKIN OR
|
||
CLOTHING
|
||
• Take off contaminated clothing.
|
||
• Rinse skin immediately with plenty of water for 15-20 minutes.
|
||
• Sensitized persons should avoid further contact and reuse of contaminated
|
||
clothing.
|
||
IF INHALED • Move person to fresh air.
|
||
• If person is not breathing, call 911 or an ambulance, then give artificial respiration,
|
||
preferably by mouth-to-mouth, if possible.
|
||
• Have the product container or label with you when calling a poison control center or doctor, or
|
||
going for treatment.
|
||
• You may also contact 1-800-334-7577, collect day or night, for emergency medical treatment
|
||
information.
|
||
• This product is identified as Warrant Herbicide, EPA Registration No. 524-591.
|
||
PRECAUTIONARY STATEMENTS
|
||
Hazards to Humans and Domestic Animals. HARMFUL IF ABSORBED THROUGH THE SKIN OR
|
||
INHALED. MAY CAUSE ALLERGIC SKIN REACTION. Prolonged or frequently repeated skin contact
|
||
may cause allergic reactions in some individuals. Avoid breathing vapor or spray mist. Remove
|
||
contaminated clothing and wash before reuse. Avoid contact with skin or clothing. Wash thoroughly
|
||
with soap and water after handling.
|
||
ACETOCHLOR GROUP HERBICIDE
|
||
DIRECTIONS FOR USE
|
||
It is a violation of Federal law to use this product in any manner inconsistent with its labeling.
|
||
Not for Sale, Sale Into, Distribution and/or Use in Nassau and Suffolk Counties of New York State.
|
||
STORAGE AND DISPOSAL
|
||
Proper pesticide storage and disposal are essential to protect against exposure to people and the
|
||
environment due to leaks and spills, excess product or waste, and vandalism. Do not allow this
|
||
product to contaminate water, foodstuffs, feed or seed by storage or disposal. PESTICIDE STORAGE:
|
||
Store pesticides away from food, pet food, feed, seed, fertilizers, and veterinary supplies. Keep
|
||
container closed to prevent spills and contamination. PESTICIDE DISPOSAL: To avoid wastes,
|
||
use all material in this container, including rinsate, by application according to label directions.
|
||
If wastes cannot be avoided, offer remaining product to a waste disposal facility or pesticide
|
||
disposal program. Such programs are often run by state or local governments or by industry. All
|
||
disposal must be in accordance with applicable federal, state and local regulations and procedures.
|
||
CONTAINER HANDLING AND DISPOSAL: Non-refillable, Rigid Plastic 2.5-gallon Containers
|
||
of greater than 1-gallon but equal to or less than 5-gallon capacity: Non-refillable container.
|
||
Do not reuse this container to hold materials other than pesticides or dilute pesticides (rinsate).
|
||
After emptying and cleaning, it may be allowable to temporarily hold rinsate or other pesticide-
|
||
related materials in the container. Contact your state regulatory agency to determine allowable
|
||
practices in your state. Triple rinse or pressure rinse (or equivalent) this container promptly after
|
||
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
|
||
tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4-full with water
|
||
and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store
|
||
rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this
|
||
procedure two more times. Pressure rinse as follows: Empty the remaining contents into application
|
||
equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold
|
||
container upside down over application equipment or mix tank or collect rinsate for later use
|
||
or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI
|
||
for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Once properly rinsed,
|
||
some agricultural plastic pesticide containers can be taken to a container collection site or picked
|
||
up for recycling. To find the nearest site, contact your chemical dealer or Bayer CropScience LP at
|
||
1-866-99BAYER (1-866-992-2937). If recycling is not available, dispose of in accordance with
|
||
federal, state, and local regulations and procedures, which may include puncturing the properly rinsed
|
||
container and disposing in a sanitary landfill.
|
||
Warrant, Roundup, and Roundup Ready are trademarks of Bayer Group. All other trademarks are the
|
||
property of their respective owners. ©2021 Bayer Group. All rights reserved.
|
||
Packed For:
|
||
Bayer CropScience LP
|
||
800 N. Lindbergh Blvd.
|
||
St. Louis, Missouri 63167
|
||
WARRANT® Herbicide
|
||
US62219635C 200618Cv2 08/21
|
||
FOR PRODUCT INFORMATION OR ASSISTANCE IN USING THIS PRODUCT,
|
||
CALL TOLL-FREE, 1-866-99BAYER (1-866-992-2937)
|
||
IN CASE OF AN EMERGENCY INVOLVING THIS HERBICIDE PRODUCT, OR FOR
|
||
MEDICAL ASSISTANCE, CALL COLLECT, DAY OR NIGHT, 1-800-334-7577
|
||
BASE LABEL
|
||
COPY AREA
|
||
6.75” .563”.687”
|
||
8.00”
|
||
6.625”
|
||
6.875”
|
||
COPY AREA
|
||
BASE LABEL
|
||
COPY AREA
|
||
6.75” .563”.687”
|
||
8.00”
|
||
6.625”
|
||
6.875”
|
||
COPY AREA
|