crop-chem-docs/corpus/epa_ppls/100-1561.md

# VIBRANCE MAXX

- EPA Reg No: **100-1561**
- Registrant: SYNGENTA CROP PROTECTION, LLC
- Signal word: Caution
- Active ingredients: Fludioxonil (2.35%); Metalaxyl-M (3.52%); Sedaxane (4.69%)
- Label accepted: 2026-06-23
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000100-01561-20260623.pdf

---
June 23, 2026
Patsy Laird
Regulatory Manager, Seedcare
Syngenta Crop Protection, LLC
P.O. Box 18300
Greensboro, NC 27419
Subject: Label Amendment - Registration Review Mitigation for Sedaxane
Product Name: Vibrance® Maxx
EPA Registration Number: 100-1561
Application Date: February 13, 2026
Case Number: 684616
Dear Mrs. Patsy Laird:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act 
(FIFRA), as amended, has completed reviewing all the information submitted with your 
application to support the Registration Review of the above referenced product in 
connection with the Sedaxane Interim Decision, and has concluded that your submission 
is acceptable. The label referred to above, submitted in connection with registration under 
FIFRA, as amended, is acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then 
please be aware that the website becomes labeling under the Federal Insecticide, 
Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is
false or misleading, the product would be misbranded and unlawful to sell or distribute 
under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may 
consider false or misleading. In addition, regardless of whether a website is referenced on 
your product’s label, claims made on the website may not substantially differ from those 
claims approved through the registration process. Therefore, should the Agency find or if it 
is brought to our attention that a website contains false or misleading statements or 
claims substantially differing from the EPA approved registration, the website will be 
referred to the EPA’s Office of Enforcement and Compliance Assurance.

Page 2 of 2 
EPA Reg. No. 100-1561
Decision No. 684616
A stamped copy of your labeling is enclosed for your records. This labeling 
supersedes all previously accepted labeling and must be used at your next label 
printing. You must submit one copy of the final printed labeling before you release 
the product for shipment with the new labeling. In accordance with 40 CFR 
152.130(c), you may distribute or sell this product under the previously approved 
labeling for 12 months from the date of this letter. After 12 months, you may only 
distribute or sell this product if it bears this new revised labeling or subsequently 
approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and 
its implementing regulation at 40 CFR 152.3.
If you have any questions about this letter, please contact Samantha Carter by phone at 
202-566-1179, or via email at carter.samantha@epa.gov. 
Sincerely,
Marianne Walters, Team Lead
Risk Management and Implementation Branch 3
 Pesticide Re-Evaluation Division
Office of Pesticide Programs
ENCLOSURE: Stamped label

(Master label)
MEFENOXAM GROUP 4 FUNGICIDE
SEDAXANE GROUP 7 FUNGICIDE
FLUDIOXONIL GROUP 12 FUNGICIDE
Vibrance®Maxx 
Fungicide
A seed treatment product for protection against damage from listed soil-borne, seed-borne 
and seedling diseases of legumes. 
Active Ingredients:
Sedaxane1............................................................................................................ 4.69%
Mefenoxam2......................................................................................................... 3.52%
Fludioxonil3........................................................................................................... 2.35% 
Other Ingredients: 89.44% 
Total: 100.00%
1CAS No. 874967-67-6 
2CAS No. 70630-17-0 and CAS No. 69516-34-3 
3CAS No. 131341-86-1 
Vibrance Maxx is a flowable concentrate for seed treatment containing 0.42 lb sedaxane, 
0.31 lb mefenoxam, and 0.21 lb fludioxonil per gallon. 
KEEP OUT OF REACH OF CHILDREN.
CAUTION
See additional precautionary statements and directions for use in booklet [on label].
EPA Reg. No. 100-1561
EPA Est. XXXXX
Net Contents
6/23/2026
100-1561

Vibrance Maxx
Page 2
 
FIRST AID 
If swallowed Call a poison control center or doctor immediately for treatment 
advice.
 Have person sip a glass of water if able to swallow. 
 Do not induce vomiting unless told to by a poison control center 
or doctor. 
 Do not give anything to an unconscious person. 
Have the product container or label with you when calling a poison control center or 
doctor or going for treatment.
HOTLINE NUMBER
For 24-Hour Medical Emergency Assistance (Human or Animal)
or Chemical Emergency Assistance (Spill, Leak, Fire, or Accident),
Call 
1-800-888-8372 
PRECAUTIONARY STATEMENTS
Hazards to Humans and Domestic Animals
CAUTION 
 
Harmful if swallowed. Wash thoroughly with soap and water after handling, and before 
eating, drinking, chewing gum, using tobacco, or using the toilet. 
 
Personal Protective Equipment (PPE)
Applicators and other handlers must wear:
 Long-sleeved shirt and long pants 
 Chemical-
™ 
 Shoes plus socks 
 
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for 
washables exist, use detergent and hot water. Keep and wash PPE separately from other 
laundry. 
 
Engineering Control Statements 
 
When handlers use closed systems in a manner that meets the requirements listed in the 
Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.607 (d) and 
(e)), the handler PPE requirements may be reduced or modified as specified in the WPS.

Vibrance Maxx
Page 3
 
User Safety Recommendations
Users should:
 Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.
 Remove clothing/PPE immediately if pesticide gets inside, then wash thoroughly and 
put on clean clothing. 
 Remove PPE immediately after handling this product. Wash the outside of gloves 
before removing. As soon as possible, wash thoroughly and change into clean 
clothing.
Environmental Hazards
This pesticide is toxic to fish, aquatic invertebrates, oysters and shrimp. Do not 
contaminate water when disposing of equipment washwater or rinsate. 
 
Groundwater Advisory 
Mefenoxam is known to leach through soil into ground water under certain conditions as a 
result of agricultural use. Fludioxonil has properties and characteristics associated with 
chemicals detected in groundwater. These chemicals may leach into groundwater if used 
in areas where soils are permeable, particularly where the water table is shallow. 
 
Physical and Chemical Hazards 
Do not mix or allow coming in contact with oxidizing agent. Hazardous chemical reaction 
may occur.

Vibrance Maxx
Page 4
 
CONDITIONS OF SALE AND LIMITATION OF WARRANTY AND LIABILITY 
NOTICE: Read the entire Directions for Use and Conditions of Sale and Limitation of 
Warranty and Liability before buying or using this product. If the terms are not acceptable, 
return the product at once, unopened, and the purchase price will be refunded. 
The Directions for Use of this product must be followed carefully. It is impossible to eliminate 
all risks inherently associated with the use of this product. Crop injury, ineffectiveness or 
other unintended consequences may result because of such factors as manner of use or 
application, weather or crop conditions, presence of other materials or other influencing 
factors in the use of the product, which are beyond the control of SYNGENTA CROP 
PROTECTION, LLC or Seller. To the extent permitted by applicable law, Buyer and User 
agree to hold SYNGENTA and Seller harmless for any claims relating to such factors. 
 
SYNGENTA warrants that this product conforms to the chemical description on the label 
and is reasonably fit for the purposes stated in the Directions for Use, subject to the inherent 
risks referred to above, when used in accordance with directions under normal use 
conditions. To the extent permitted by applicable law: (1) this warranty does not extend to 
the use of this product contrary to label instructions, or under conditions not reasonably 
foreseeable to or beyond the control of Seller or SYNGENTA, and (2) Buyer and User 
assume the risk of any such use. TO THE EXTENT PERMITTED BY APPLICABLE LAW, 
SYNGENTA MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR 
A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY 
EXCEPT AS WARRANTED BY THIS LABEL. 
 
To the extent permitted by applicable law, in no event shall SYNGENTA be liable for any 
incidental, consequential or special damages resulting from the use or handling of this 
product. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE 
REMEDY OF THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF SYNGENTA 
AND SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES 
(INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT, 
NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE 
USE OR HANDLING OF THIS PRODUCT, SHALL BE THE RETURN OF THE PURCHASE 
PRICE OF THE PRODUCT OR, AT THE ELECTION OF SYNGENTA OR SELLER, THE 
REPLACEMENT OF THE PRODUCT. 
 
SYNGENTA and Seller offer this product, and Buyer and User accept it, subject to the 
foregoing Conditions of Sale and Limitation of Warranty and Liability, which may not be 
modified except by written agreement signed by a duly authorized representative of 
SYNGENTA.

Vibrance Maxx
Page 5
 
DIRECTIONS FOR USE 
It is a violation of federal law to use this product in a manner inconsistent with its labeling.
 
Use is permitted on-farm and in commercial seed treatment facilities. Use is also 
permitted as an end-use seed treatment on agricultural establishments at planting, or 
immediately before planting, as specified in the Crop Use Directions. This product is to 
be used in liquid or slurry treaters only. 
 
Treatment of highly mechanically scarred or damaged seed or seed known to be of low 
vigor and poor quality may result in reduced germination and/or reduction of seed and 
seedling vigor. Treat a quantity of seed using equipment similar to that planned for 
treating the total seed lot. Prior to treatment, conduct germination tests on a portion of 
seed before committing the total seed lot to a selected seed treatment. 
 
Due to seed quality, crop or variety sensitivity, and seed storage conditions beyond the 
control of Syngenta, no claims are made to guarantee the germination of seed or 
propagating material for all crop seed when treated with Vibrance Maxx. 
 
Maximum usage when applying both metalaxyl- and mefenoxam- containing 
products to the same crop within the same season: Do not apply more than the 
maximum yearly total application rate for the active ingredient as stated on the label of the 
product containing the lowest yearly total on that crop. 
 
FAILURE TO FOLLOW THE DIRECTIONS FOR USE AND PRECAUTIONS ON THIS 
LABEL MAY RESULT IN CROP INJURY, POOR DISEASE CONTROL, AND/OR 
ILLEGAL RESIDUES. 
 
AGRICULTURAL USE REQUIREMENTS 
Use this product only in accordance with its labeling and with the Worker Protection 
Standard, 40 CFR part 170. This Standard contains requirements for the protection of 
agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of 
agricultural pesticides. It contains requirements for training, decontamination, 
notification, and emergency assistance. It also contains specific instructions and 
exceptions pertaining to the statements on this label about personal protective 
equipment (PPE) and restricted-entry interval. The requirements in this box only apply 
to uses of this product that are covered by the Worker Protection Standard. 
Do not enter or allow worker entry into treated areas during the restricted-entry 
interval (REI) of 48 hours.Exception: If the seed is treated with the product and the 
treated seed is soil-injected or soil-incorporated, the Worker Protection Standard, under 
certain circumstances, allows workers to enter the treated area if there will be no 
contact with anything that has been treated.
PPE required for early entry to treated areas that is permitted under the Worker 
Protection Standard and that involves contact with anything that has been treated, such 
as plants, soil, or water is:

Vibrance Maxx
Page 6
 
 Long-sleeved shirt and long pants
Chemical-
mils
Shoes plus socks
PRODUCT INFORMATION
Vibrance Maxx is a seed treatment product containing the active ingredients sedaxane, 
mefenoxam, and fludioxonil. Vibrance Maxx protects against damage from listed seed and 
soil-borne diseases of legumes. 
 
 
RESISTANCE MANAGEMENT 
MEFENOXAM GROUP 4 FUNGICIDE
SEDAXANE GROUP 7 FUNGICIDE
FLUDIOXONIL GROUP 12 FUNGICIDE
For resistance management, please note that Vibrance Maxx contains Group 4/ 
mefenoxam, Group 7/sedaxane and Group 12/fludioxonil fungicides. Any fungal 
population may contain individuals naturally resistant to Vibrance Maxx and other Group 4, 
Group 7 or Group 12 fungicides. A gradual or total loss of pest control may occur over time 
if these fungicides are used repeatedly in the same fields. Appropriate resistance-
management strategies should be followed.
 
Mefenoxam belongs to the phenylamide class of chemistry which interferes with fungal 
RNA synthesis. Sedaxane is a succinate dehydrogenase inhibitor (SDHI) and belongs to 
the carboxamide class of chemistry which disrupts cellular respiration and energy 
generation. Fludioxonil belongs to the phenylpyrrole class of chemistry which interferes 
with osmotic signal transduction. 
 
To delay fungicide resistance, take one or more of the following steps: 
 Rotate the use of Vibrance Maxx or other Group 4, Group 7 or Group 12 fungicides 
within a growing season sequence with different groups that control the same 
pathogens. 
 Use tank mixtures with fungicide from a different group that are equally effective on the 
target pest when such use is permitted. Use at least the minimum application rate as 
labeled by the manufacturer. 
 Adopt an integrated disease management program for fungicide use that includes 
scouting, uses historical information related to pesticide use, and crop rotation, and 
which considers host plant resistance, impact of environmental conditions on disease 
development, disease thresholds, as well as cultural, biological and other chemical 
control practices.

Vibrance Maxx
Page 7
 
 Where possible, make use of predictive disease models to effectively time fungicide 
applications. Note that using predictive models alone is not sufficient to manage 
resistance.
 Monitor treated fungal populations for resistance development.
 Contact your local extension specialist or certified crop advisor for any additional 
pesticide resistance-management and/or IPM recommendations for specific crop and 
pathogens.
 For further information or to report suspected resistance contact Syngenta at 1-866-
Syngent(a) (866-796-4368). You can also contact your pesticide distributor or 
university extension specialist to report resistance. 
 
Syngenta encourages responsible product stewardship to ensure effective long-term
control of the fungal diseases on this label. 
 
For additional information on Fungicide Resistance Management: 
 Contact Syngenta representatives at 1-866-796-4368
 Contact your local extension specialist or certified crop advisor 
 Visit the Fungicide Resistance Action Committee (FRAC) on the web at: 
http://www.frac.info 
MIXING PROCEDURES
Important:Always re-circulate Vibrance Maxx thoroughly before using.
 
Follow the manufacturer application instructions for the seed treatment equipment being 
used. 
 
Apply Vibrance Maxx as a water-based slurry utilizing standard slurry seed treatment 
equipment which provides uniform seed coverage. Uneven or incomplete seed coverage 
may not give the desired level of disease control. Thoroughly mix the specified amount of 
Vibrance Maxx into the required amount of water or liquid inoculant for the slurry treater 
and dilution rate to be used. 
 
Certain crops require addition of inoculants when the seed is treated or planted. Vibrance 
Maxx is compatible with several liquid inoculant products. Consult the maker of the 
inoculant product and a Syngenta representative for directions before applying Vibrance 
Maxx with inoculants. 
 
The total application volume must be sufficient to provide desired level of coverage. 
Dilution is typically done with water or liquid inoculants. The minimum slurry volume to 
achieve adequate coverage is 4 fluid ounces per 100 pounds of seed for all legumes 
except chickpea. For chickpea, a total minimum slurry volume of 8 fluid ounces per 100 
pounds of seed is recommended for optimal coverage. More diluent may be required to 
obtain complete coverage depending on seed surface or shape.

Vibrance Maxx
Page 8
 
Continuous agitation or mixing of the slurry mixture is necessary to prevent settling out of 
the solution. Clean out any unused product from the treater after treating or maintain 
constant agitation if the leftover slurry will be maintained overnight. 
 
Required Dye Statement: Seed treated with this product must be visually identifiable from 
untreated seed by the use of an approved colorant or dye to prevent accidental use of 
treated seed as food for humans or feed for animals. Refer to 21 CFR, Part 2.25. Any 
colorant or dye added to treated seed must be cleared for use in accordance with 40 CFR, 
Part 153.155(c). 
 
Allow seed to dry before bagging.
Follow planter manufacturer specifications for use of talc or other hopper box additives at 
planting. Seed must be completely dry before adding to planter. 
 
Tank Mixtures 
Vibrance Maxx mixes easily with water and other water-based seed treatments 
manufactured by Syngenta and many other companies. When mixing with products from 
other manufacturers, test the compatibility prior to use by conducting a jar test: Mix all 
intended seed treatments with a proportional amount of water to achieve the desired slurry 
mixture in a clear glass container. Mix well and allow mixture to sit for one hour. Remix 
and observe for incompatibility. 
 
Mixing Vibrance Maxx with tank-mix partners: Add ½ of the required water to the mix tank 
and turn on the agitation. Mechanical agitation is preferred. If using wettable powders, 
add them first to clean water allowing them to completely disperse prior to adding Vibrance 
Maxx or other products. Allow each tank-mix partner to completely disperse before adding 
the next product. Add the remaining amount of water and agitate. Maintain agitation until 
the entire slurry mixture has been used. 
 
It is the pesticide user's responsibility to ensure that all products are registered for the 
intended use. Read and follow the applicable restrictions and limitations and directions for 
use on all product labels involved in tank mixing. Users must follow the most restrictive 
directions for use and precautionary statements of each product in the tank mixture.

Vibrance Maxx
Page 9
 
SEED BAG LABEL REQUIREMENTS
Use of On-Farm Treated Seed (when treated seed are not for sale or distribution)
 
Treated seed sold or distributed for a use not permitted by the following labeling does not 
qualify as an exempted treated article under 40 CFR 152.25(a) and is therefore sale or 
distribution of an unregistered pesticide, pursuant to FIFRA section 12. 
 
 Store treated seed away from food and feedstuffs. 
 DO NOT allow children, pets, or livestock to have access to treated seed.
 Treated seed are for planting purposes only. DO NOTuse for food, feed, or oil 
purposes. DO NOT use treated seed for fuel or ethanol production purposes. 
 Wear long-sleeved shirt, long pants, shoes, socks, and chemical-resistant gloves when 
handling treated seed.
 DO NOTplant treated seed by broadcasting to the soil surface. Ensure that all planted 
seeds are thoroughly incorporated by the planter during planting. Additional 
incorporation may be required to thoroughly cover exposed seeds.
 Treated seed exposed on the soil surface may be hazardous to wildlife. Cover or 
collect treated seed spilled during loading and planting (such as in row ends).
 Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by one or 
more of the following methods: 
o Collect excess treated seed for reuse for planting. 
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30 feet 
away from bodies of water at a depth of 6 inches or double the planting depth, 
whichever is greater. 
o Dispose of excess treated seed by placing them in a landfill in accordance with 
applicable laws in your state. 
o Return excess treated seed to the supplier if permitted by the state. 
 DO NOT contaminate bodies of water when disposing of equipment wash water. 
 Advisory Dust-Reducing Technique: The use of seed flow lubricants or polymer 
coatings may help decrease the amount of dust released during planting. Follow the 
recommendations of the planter manufacturer regarding the use of seed flow 
lubricants.

Vibrance Maxx
Page 10
 
Seed Treatment in Commercial Facilities or Seed Treatment on Farm (when treated 
seed are to be sold or distributed) – Seed Bag Labeling Requirements 
 
The Federal Seed Act requires that bags containing treated seed shall be labeled with the 
following statements: 
 This seed has been treated with fludioxonil, mefenoxam, and sedaxane fungicides. 
 DO NOT use for food, feed, or oil purposes. 
The U.S. Environmental Protection Agency requires that bags containing treated seed 
shall be labeled with the following statements. Any seed treated with Vibrance Maxx that is 
sold or distributed without these statements or that is sold or distributed for a use not 
permitted by the following labeling does not qualify as an exempted treated article under 
40 CFR 152.25(a) and is therefore sale or distribution of an unregistered pesticide, 
pursuant to FIFRA section 12(a)(1)(A).
 
This seed has been treated with Vibrance Maxx (EPA Reg No. 100-1561) containing 
fludioxonil, mefenoxam, and sedaxane. Any seed treated with Vibrance Maxx that is sold 
or distributed for a use not permitted by the following labeling does not qualify as an 
exempted treated article under 40 CFR 152.25(a) and is therefore sale or distribution of an 
unregistered pesticide, pursuant to FIFRA section 12(a)(1)(A).
 
 The contents of this bag are for planting purposes only. DO NOTuse for food, feed, 
or oil purposes. DO NOT use for fuel or ethanol production purposes. 
 Store treated seed away from food and feedstuffs. 
 DO NOT allow children, pets, or livestock to have access to treated seed.
 Wear long-sleeved shirt, long pants and chemical-resistant gloves when handling 
treated seed. 
 DO NOT plant treated seed by broadcasting to the soil surface. Ensure that all 
planted seeds are thoroughly incorporated by the planter during planting. Additional 
incorporation may be required to thoroughly cover exposed seeds. 
 Treated seed exposed on soil surface may be hazardous to wildlife. Cover or 
collect treated seed spilled during loading and planting (such as in row ends).
 Treated seed must be planted into the soil at a depth greater than 1 inch. 
 Manage excess treated seed (e.g., spilled, unused, or expired treated seed) by one 
or more of the following methods: 
o Collect excess treated seed for reuse for planting. 
o Bury excess treated seed (only allowed if totaling 1 pound or less) at least 30 
feet away from bodies of water at a depth of 6 inches or double the planting 
depth, whichever is greater. 
o Dispose of excess treated seed by placing them in a landfill in accordance 
with applicable laws in your state. 
o Return excess treated seed to the supplier if permitted by the state. 
 DO NOT contaminate water bodies when disposing of planting equipment wash 
waters. 
 Dispose of seed packaging in accordance with local requirements.
 In the event of crop failure or harvest of a crop grown from this treated seed, the 
field may be replanted as follows:

Vibrance Maxx
Page 11
 
o Immediately to Cereal Grains Crop Group 15, Corn (field, pop, sweet), Cotton, 
Legume Vegetables (Succulent or Dried) Crop Group 6, Peanut, Potato, 
Rapeseed (including canola) Crop Subgroup 20A, Soybean, and Sugarbeet. 
o All other crops may be replanted a minimum of 30 days after planting seed
treated with Vibrance Maxx. 
 DO NOT apply more than 0.25 lb ai/A (115 g ai/A) of mefenoxam- or metalaxyl-
containing products or 0.041 lb ai/A (19 g ai/A) of sedaxane-containing products per 
calendar year as a seed treatment on Legume Vegetables (Succulent or Dried) 
Crop Group 6, Except Soybean, and Foliage of Legume Vegetables (Except 
Soybeans) Crop Subgroup 7A. 
 Groundwater Advisory: Mefenoxam is known to leach through soil into 
groundwater under certain conditions as a result of agricultural use. Fludioxonil has 
properties and characteristics associated with chemicals detected in groundwater. 
These chemicals may leach into the groundwater if used in areas where soils are 
permeable, particularly where the water table is shallow. 
Advisory Dust-Reducing Technique: The use of seed flow lubricants or polymer 
coatings may help decrease the amount of dust released during planting. Follow the 
recommendations of the planter manufacturer regarding the use of seed flow 
lubricants. 
 [All seed bag tags must be legible and set in at least 8-point font size.]

Vibrance Maxx
Page 12
 
CROP USE DIRECTIONS
When applied according to the Rate Table, Vibrance Maxx provides early-season 
protection against the diseases listed in the tables below. 
 
Rate Table 
Crop Diseases
Use Rate
(fl oz/100 lb 
seed)
Active Ingredient
(grams/100 kg 
seed)
Legume Vegetables 
(Succulent of Dried) Crop 
Group 6, Except Soybean;
Foliage of Legume 
Vegetables Crop Subgroup 
7A
Pea, Pisum species:
dwarf pea
edible-pod pea 
English pea 
field pea 
garden pea 
green pea 
snow pea 
sugar snap pea 
Pigeon Pea 
(Cajanus cajan) 
Chickpea (garbanzo bean) 
(Cicer arietinum) 
Lentil 
(Lens esculenta) 
Bean, Lupinus species: 
grain lupin 
sweet lupin 
white lupin 
white sweet lupin 
Broad bean (fava bean)
(Vicia faba)
Edamame
(Glycine max)
Guar 
(Cyamopsis tetragonoloba) 
Jackbean 
(Canavalia ensiformis) 
Lablab bean (hyacinth bean) 
(Lablab purpureus) 
Sword bean 
(Canavalia gladiate)
Anthracnose caused by 
seed-borne 
Colletotrichum spp. 
 
Seed-borne Ascochyta 
blight and foot rot 
caused by 
Ascochyta/Phoma spp. 
 
Seed and soil-borne 
diseases caused by 
Botrytis, 
Diaporthe/Phomopsis, 
Fusarium, Pythium and 
Rhizoctonia spp. 
 
Seed-borne Sclerotinia 
sclerotiorum
1.54 
Mefenoxam: 3.75 
Fludioxonil: 2.5 
Sedaxane: 5.0

Vibrance Maxx
Page 13
 
Crop Diseases 
Use Rate
(fl oz/100 lb 
seed) 
Active Ingredient 
(grams/100 kg 
seed)
Bean, Phaseolusspecies:
field bean
kidney bean 
Lima bean (dry) 
navy bean 
pinto bean 
runner bean 
snap bean 
tepary bean 
wax bean 
Bean, Vigna species: 
adzuki bean 
asparagus bean 
blackeyed pea
catjang
Chinese longbean 
cowpea 
Crowder pea 
moth bean 
mung bean 
rice bean 
southern pea 
urd bean 
yardlong bean 
Anthracnose caused by 
seed-borne 
Colletotrichum spp. 
 
Seed-borne Ascochyta 
blight and foot rot 
caused by 
Ascochyta/Phoma spp. 
 
Seed and soil-borne 
diseases caused by 
Botrytis, 
Diaporthe/Phomopsis, 
Fusarium, Pythium and 
Rhizoctonia spp. 
 
Seed-borne Sclerotinia 
sclerotiorum 
1.54 
Mefenoxam: 3.75 
Fludioxonil: 2.5 
Sedaxane: 5.0

Vibrance Maxx
Page 14
 
When to add Apron XL®: 
For control of early-season Phytophthora root rot in legume vegetables and systemic 
downy mildew in peas, refer to the Apron XL label for the rate needed for control. Add the 
required amount of Apron XL to the treatment slurry minus the equivalent amount of Apron 
XL in Vibrance Maxx. Vibrance Maxx contains the equivalent amount of mefenoxam 
contained in 0.16 fl oz of Apron XL. 
 
When to add Mertect®340-F:
For heavy Ascochyta infections in field pea and pigeon pea, 1.02 fl oz of Mertect 340-
F/100 lb of seed may be added for best protection. For heavy Ascochyta infections of 
lentil, add 1.05 fl oz of Mertect 340-F, and for chickpea, add 2.04 fl oz of Mertect 340 F as 
directed on the Mertect 340-F label. See Mertect 340-F Tank Mix Rate Table for 
clarification on tank-mixing Mertect 340-F with Vibrance Maxx. 
 
Mertect 340-F Tank Mix Rate Table 
Crop Disease Pressure Tank-mix 
Partner 
Tank-mix Partner
Use Rate 
(fl oz per 100 lb 
seed)
Field Pea and Pigeon Pea 
 
Heavy infections of 
Ascochyta spp. 
Mertect 340-F 
 
1.02 
Lentil 
 
Heavy infections of 
Ascochyta spp. 
Mertect 340-F 
 
1.05 
Chickpea 
 
Heavy infections of 
Ascochyta spp. 
Mertect 340-F 
 
2.04 
For best results against Ascochyta blight, plant field pea, pigeon pea, lentil or chickpea 
seed treated with Vibrance Maxx or Vibrance Maxx plus Mertect 340-F fungicide as late in 
the spring as possible. 
 
RESTRICTION 
 DO NOT apply more than 0.25 lb ai/Acre (115 g ai/Acre) per calendar year of 
mefenoxam- or metalaxyl-containing products as a seed treatment on Legume 
Vegetables (Succulent or Dried) Crop Group 6, Except Soybean, and Foliage of 
Legume Vegetables (Except Soybeans) Crop Subgroup 7A.

Vibrance Maxx
Page 15
 
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal. 
Pesticide Storage 
Store in the original container and only in a cool, dry, secure place.
Pesticide Disposal
Wastes resulting from the use of this product may be disposed of on site or at an approved 
waste disposal facility. If these wastes cannot be used according to label instructions, 
contact your State Pesticide or Environmental Control Agency or the Hazardous Waste 
representative at the nearest EPA Regional Office for guidance in proper disposal 
methods.
Container Handling [less than or equal to 5 gallons]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank and drain for 10 seconds after the flow begins to 
drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate 
into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 
10 seconds after the flow begins to drip. Repeat this procedure two more times. Then 
offer for recycling if available or puncture and dispose of in a sanitary landfill, or by 
incineration, or by other procedures approved by state and local authorities. 
Container Handling [greater than 5 gallons]
Non-refillable container. Do not reuse or refill this container. Triple rinse container (or 
equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents 
into application equipment or a mix tank. Fill the container ¼ full with water. Replace and 
tighten closures. Tip container on its side and roll it back and forth, ensuring at least one 
complete revolution, for 30 seconds. Stand the container on its end and tip it back and 
forth several times. Turn the container over onto its other end and tip it back and forth 
several times. Empty the rinsate into application equipment or a mix tank or store rinsate 
for later use or disposal. Repeat this procedure two more times. Then offer for recycling if 
available or puncture and dispose of in a sanitary landfill, or by incineration, or by other 
procedures approved by state and local authorities. 
Container Handling [greater than 5 gallons]
Refillable container. Refill this container with pesticide only. Do not reuse this container 
for any other purpose. Cleaning the container before final disposal is the responsibility of 
the person disposing of the container. Cleaning before refilling is the responsibility of the 
person refilling. To clean container before final disposal, empty the remaining contents 
from this container into application equipment or mix tank. Fill the container about 10 
percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. 
Pour or pump rinsate into application equipment or rinsate collection system. Repeat this 
rinsing procedure two more times. Then offer for recycling if available or puncture and 
dispose of in a sanitary landfill, or by incineration, or by other procedures approved by 
state and local authorities.

Vibrance Maxx
Page 16
 
For minor spills, leaks, etc., follow all precautions on this label and clean up immediately. 
Take special care to avoid contamination of equipment and facilities during cleanup and 
disposal of wastes. In the event of a major spill, fire, or other emergency, call 1-800-888-
8372 day or night.
CONTAINER IS NOT SAFE FOR FOOD, FEED, OR DRINKING WATER!
Vibrance®, Apron XL®, Mertect®, the ALLIANCE FRAME 
the SYNGENTA Logo and the PURPOSE ICON 
are Trademarks of a Syngenta Group Company 
 
Viton™ is a trademark of The Chemours Company FC, LLC 
 
© 20XX Syngenta 
 
For non-emergency (e.g., current product information), call
Syngenta Crop Protection at 1-866-796-4368
Manufactured for:
Syngenta Crop Protection, LLC
P. O. Box 18300
Greensboro, North Carolina 27419-8300
Vibrance Maxx 1561 MAS 1021 AMEND-B 0226-CL – jeb – 05/19/2026 
000100-01561.20260216B.VIBRANCE_MAXX.AMEND-FEB2026-CL.PDF