1549 lines
83 KiB
Markdown
1549 lines
83 KiB
Markdown
# Enlite®
|
||
|
||
- EPA Reg No: **352-757**
|
||
- Registrant: CORTEVA AGRISCIENCE, LLC
|
||
- Signal word: Caution
|
||
- Active ingredients: Thifensulfuron (8.8%); Chlorimuron (2.85%); Flumioxazin (36.21%)
|
||
- Label accepted: 2026-06-03
|
||
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/000352-00757-20260603.pdf
|
||
|
||
---
|
||
June 3, 2026
|
||
|
||
Terri Moss
|
||
US Crop Protection Regulatory Specialist
|
||
Corteva Agriscience, LLC
|
||
9330 Zionsville Road
|
||
Indianapolis, IN 46268
|
||
terri.moss@corteva.com
|
||
|
||
Subject: Label Amendment - Registration Review Mitigation for Flumioxazin
|
||
Product Name: Enlite
|
||
EPA Registration Number: 352-757
|
||
Case Number: 472677
|
||
Application Dates: August 14, 2021
|
||
|
||
Dear Terri Moss:
|
||
|
||
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA),
|
||
as amended, has completed reviewing all the information submitted with your application to
|
||
support the Registration Review of the above referenced product in connection with the
|
||
Flumioxazin Interim Decision, and has concluded that your submission is acceptable. The label
|
||
referred to above, submitted in connection with registration under FIFRA, as amended, is
|
||
acceptable.
|
||
|
||
Should you wish to add/retain a reference to the company’s website on your label, then please
|
||
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
|
||
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the
|
||
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E).
|
||
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
|
||
addition, regardless of whether a website is referenced on your product’s label, claims made on
|
||
the website may not substantially differ from those claims approved through the registration
|
||
process. Therefore, should the Agency find or if it is brought to our attention that a website
|
||
contains false or misleading statements or claims substantially differing from the EPA approved
|
||
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance
|
||
Assurance.
|
||
|
||
A stamped copy of your labeling is enclosed for your records. This labeling supersedes
|
||
all previously accepted labeling and must be used at your next label printing. You must
|
||
|
||
Page 2 of 2
|
||
EPA Reg. No. 352-757
|
||
Case No. 472677
|
||
|
||
submit one copy of the final printed labeling before you release the product for
|
||
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may
|
||
distribute or sell this product under the previously approved labeling for 12 months
|
||
from the date of this letter. After 12 months, you may only distribute or sell this
|
||
product if it bears this new revised labeling or subsequently approved labeling. “To
|
||
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation
|
||
at 40 CFR 152.3.
|
||
|
||
If you have any questions about this letter, please contact Stephanie Burkhardt via email at
|
||
burkhardt.stephanie@epa.gov.
|
||
|
||
Sincerely,
|
||
|
||
|
||
|
||
Candice Lavelle, Branch Chief
|
||
Worker Protection and Intergovernmental Affairs
|
||
Branch
|
||
Pesticide Re-Evaluation Division
|
||
Office of Pesticide Programs
|
||
|
||
|
||
|
||
ENCLOSURE: Stamped label
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 8
|
||
(Bulk/Tote Base Label)
|
||
Enlite®
|
||
[Alternate Brand Name: DuPont Enlite®]
|
||
HERBICIDE
|
||
[Unit area pack, the entire contents of this package must be emptied into the spray tank]
|
||
For preplant and preemergence weed control in soybeans.
|
||
Dispersible Granules
|
||
A c t i v e I n g r e d i e n t s B y W e i g h t
|
||
Chlorimuron ethyl
|
||
Ethyl 2-[[[[(4-chloro-6-methoxypyrimidin-2-yl)amino]carbonyl]
|
||
amino]sulfonyl]benzoate 2.85%
|
||
Flumioxazin
|
||
2-[7-fluor-3,4-dihydro-3oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl]
|
||
-4,5,6,7-tetrahydro-1H-isoindole -1,3(2H)-dione 36.21%
|
||
Thifensulfuron methyl
|
||
Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino]
|
||
sulfonyl]-2-thiophenecarboxylate 8.80%
|
||
Other Ingredients 5 2 . 1 4 %
|
||
TOTAL 100.00%
|
||
Keep Out of Reach of Children
|
||
CAUTION
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
|
||
not understand this label, find someone to explain it to you in detail.)
|
||
FIRST AID
|
||
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of
|
||
water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
|
||
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact
|
||
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or
|
||
doctor for treatment advice.
|
||
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give
|
||
artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for
|
||
further treatment advice.
|
||
IF SWALLOWED: Call poison control center or doctor immediately for treatment advice. Have person
|
||
sip a glass of water if able to swallow. DO NOT induce vomiting unless told to do so by the poison
|
||
control center or doctor. DO NOT give anything by mouth to an unconscious person.
|
||
Have the product container or label with you when calling a poison control center or doctor, or going for
|
||
treatment.
|
||
You may also contact 1-800-992-5994 for emergency medical treatment information.
|
||
CHLORIMURON ETHYL GROUP 2 HERBICIDE
|
||
FLUMIOXAZIN GROUP 14 HERBICIDE
|
||
THIFENSULFURON METHYL GROUP 2 HERBICIDE
|
||
|
||
Jun 03, 2026
|
||
352-757
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 9
|
||
|
||
|
||
Precautionary Statements
|
||
Hazards to Humans and Domestic Animals
|
||
|
||
CAUTION
|
||
|
||
Harmful if swallowed, absorbed through skin, or inhaled. Causes moderate eye irritation. Avoid
|
||
contact with skin, eyes or clothing. Avoid breathing dust or spray mist. Remove and wash
|
||
contaminated clothing before reuse.
|
||
|
||
PERSONAL PROTECTIVE EQUIPMENT (PPE)
|
||
|
||
Mixers, loaders, applicators, and other handlers must wear:
|
||
|
||
• Long-sleeved shirt and long pants
|
||
• Wear barrier laminate, butyl rubber ( 14 mils), nitrile rubber ( 14 mils), neoprene rubber (
|
||
14 mils), natural rubber ( 14 mils), polyethylene, polyvinyl chloride ( 14 mils), or viton ( 14
|
||
mils) gloves.
|
||
• Shoes plus socks
|
||
|
||
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables
|
||
exists, use detergent and hot water. Keep and wash PPE separately from other laundry.
|
||
|
||
ENGINEERING CONTROL STATEMENTS
|
||
|
||
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
|
||
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR part 170.607 (d)-(f)],
|
||
the handler PPE requirements may be reduced or modified as specified in the WPS.
|
||
|
||
Important: When reduced PPE is worn because a closed system is being used, handlers must be
|
||
provided all PPE specified above for "Applicators and Other Handlers" and have such PPE immediately
|
||
available for use in an emergency, such as a spill or equipment breakdown.
|
||
USER SAFETY RECOMMENDATIONS
|
||
USERS SHOULD:
|
||
• Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum,
|
||
using tobacco or using the toilet. Remove clothing/PPE immediately if pesticide gets inside.
|
||
• Then wash thoroughly and put on clean clothing.
|
||
• Remove PPE immediately after handling this product. Wash the outside of gloves before
|
||
removing. As soon as possible, wash thoroughly and change into clean clothing.
|
||
|
||
|
||
STORAGE AND DISPOSAL
|
||
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other
|
||
pesticides, fertilizer, food or feed in storage. Store in a cool, dry place.
|
||
|
||
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from
|
||
the use of this product must be disposed of on site or at an approved waste disposal facility.
|
||
|
||
CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for
|
||
the applicable “Nonrefillable Container” or “Refillable Container” designation.
|
||
|
||
Nonrefillable Plastic and Metal Containers (Capacity Equal to or Less Than 50 Pounds):
|
||
Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container (or equivalent)
|
||
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application
|
||
equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour
|
||
rinsate into a
|
||
pplication equipment or a mix tank or store rinsate for later use or disposal. Drain for 10
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 10
|
||
|
||
|
||
seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic
|
||
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
|
||
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers,
|
||
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary
|
||
landfill, or by other procedures approved by state and local authorities.
|
||
|
||
Nonrefillable Plastic and Metal Containers (Capacity Greater Than 50 Pounds): Nonrefillable
|
||
container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after
|
||
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
|
||
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and
|
||
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on
|
||
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back
|
||
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for
|
||
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for
|
||
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn,
|
||
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
|
||
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
|
||
approved by state and local authorities.
|
||
|
||
Nonrefillable Plastic and Metal Containers, e.g., Intermediate Bulk Containers [IBC] (Size or
|
||
Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. DO NOT
|
||
reuse or refill this container. Clean container promptly after emptying the contents from this container
|
||
into application equipment or mix tank and before final disposal using the following pressure rinsing
|
||
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that
|
||
the water spray thoroughly covers the top, bottom and all sides inside the container. The nozzle
|
||
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or
|
||
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at
|
||
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the
|
||
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system.
|
||
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling if
|
||
available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers, offer
|
||
for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill,
|
||
or by other procedures approved by state and local authorities.
|
||
|
||
Nonrefillable Paper or Plastic Bags, Fiber Sacks including Flexible Intermediate Bulk
|
||
Containers (FIBC) or Fiber Drums With Liners: Nonrefillable container. DO NOT reuse or refill this
|
||
container. Completely empty paper or plastic bag, fiber sack or drum liner by shaking and tapping
|
||
sides and bottom to loosen clinging particles. Empty residue into application or manufacturing
|
||
equipment. Then offer for recycling if available or dispose of empty paper or plastic bag, fiber sack or
|
||
fiber drum and liner in a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state
|
||
and local ordinances.
|
||
|
||
Refillable Fiber Drums With Liners: Refillable container (fiber drum only). Refilling Fiber Drum: Refill
|
||
this fiber drum with Enlite
|
||
® herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron
|
||
methyl. DO NOT reuse this fiber drum for any other purpose. Cleaning before refilling is the
|
||
responsibility of the refiller.
|
||
|
||
Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty
|
||
residue into application or manufacturing equipment. Disposing of Fiber Drum and/or Liner: DO NOT
|
||
reuse this fiber drum for any other purpose other than refilling (see preceding). Cleaning the container
|
||
(liner and/or fiber drum) before final disposal is the responsibility of the person disposing of the
|
||
container. Offer the liner for recycling if available or dispose of liner in a sanitary landfill, or by
|
||
incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is contaminated and
|
||
cannot be reused, dispose of it in the manner required for its liner. To clean the fiber drum before final
|
||
disposal, completely empty the fiber drum by shaking and tapping sides and bottom to loosen clinging
|
||
particles. Empty residue into application or manufacturing equipment. Then offer the fiber drum for
|
||
recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless
|
||
allowed by state and local ordinances.
|
||
|
||
All Other Refillable Containers: Refillable container. Refilling Container: Refill this container with Enlite
|
||
herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron methyl only. DO NOT reuse this
|
||
container for any other purpose. Cleaning before refilling is the responsibility of the refiller. Prior to
|
||
refillin
|
||
g, inspect carefully for damage such as cracks, punctures, abrasions, worn out threads and closure
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 11
|
||
|
||
|
||
devices. If damage is found, DO NOT use the container, contact Corteva Agriscience at the number
|
||
below for instructions. Check for leaks after refilling and before transporting. If leaks are found, DO NOT
|
||
reuse or transport container, contact Corteva Agriscience at the number below for instructions. Disposing
|
||
of Container: DO NOT reuse this container for any other purpose other than refilling (see preceding).
|
||
Cleaning the container before final disposal is the responsibility of the person disposing of the container.
|
||
To clean the container before final disposal, use the following pressure rinsing procedure. Insert a lance
|
||
fitted with a suitable tank cleaning nozzle into the container and ensure that the water spray thoroughly
|
||
covers the top, bottom and all sides inside the container. The nozzle manufacturer generally provides
|
||
instructions for the appropriate spray pressure, spray duration and/or spray volume. If the manufacturer’s
|
||
instructions are not available, pressure rinse the container for at least 60 seconds using a minimum
|
||
pressure of 30 PSI with a minimum rinse volume of 10% of the container volume. Drain, pour or pump
|
||
rinsate into application equipment or rinsate collection system. Repeat this pressure rinsing procedure
|
||
two more times. Then, for Plastic Containers, offer for recycling if available or puncture and dispose of in
|
||
a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state and local ordinances. For
|
||
Metal Containers, offer for recycling if available or reconditioning if appropriate, or puncture and dispose
|
||
of in a sanitar
|
||
y landfill, or by other procedures approved by state and local authorities.
|
||
|
||
ENVIRONMENTAL HAZARDS
|
||
|
||
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to
|
||
areas where surface water is present or to intertidal areas below the mean high water mark. Drift or runoff
|
||
may be hazardous to non-target plants and aquatic organisms in neighboring areas. DO NOT apply
|
||
where runoff is likely to occur. DO NOT apply when weather conditions favor drift from treated areas. DO
|
||
NOT contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate.
|
||
|
||
Groundwater Advisory
|
||
|
||
This product has properties and characteristics associated with chemicals detected in groundwater. This
|
||
product may leach into groundwater if used in areas where soils are permeable, particularly where the
|
||
water table is shallow.
|
||
|
||
Surface Water Advisory
|
||
|
||
This product may impact surface water quality due to runoff of rainwater. This is especially true for poorly
|
||
draining soils and soils with shallow ground water. This product is classified as having high potential for
|
||
reaching surface water via runoff for several months or more after application. A level, well-maintained
|
||
vegetative buffer strip between areas to which this product is applied and surface water features such as
|
||
ponds, streams, and springs will reduce the potential loading of this product from runoff water and
|
||
sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation
|
||
is expected to occur within 48 hours.
|
||
|
||
Windblown Soil Particles Advisory
|
||
|
||
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion
|
||
usually have a high silt and/or fine to very fine sand fractions and low organic matter content. Other
|
||
factors which can affects the movement of windblown soil include the intensity and direction of prevailing
|
||
winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying this product if
|
||
prevailing local conditions may be expected to result in off-site movement.
|
||
|
||
Non-target Organism Advisory
|
||
|
||
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms,
|
||
including pollinators, in areas adjacent to the treated area. Protect the forage and habitat of non-target
|
||
organisms by minimizing spray drift. For further guidance and instructions on how to minimize spray drift,
|
||
refer to the Spray Drift management section of this label.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 12
|
||
|
||
|
||
AGRICULTURAL USE REQUIREMENTS
|
||
|
||
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
|
||
part 170. Refer to the booklet under “Agricultural Use Requirements” in the Directions for Use sections
|
||
for information about this statement.
|
||
|
||
|
||
Refer to the inside of label booklet for additional precautionary information including First Aid and
|
||
Directions For Use.
|
||
|
||
Notice: Read the entire label. Use only according to label directions. Before using this product, read
|
||
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If
|
||
terms are unacceptable, return at once unopened.
|
||
|
||
EPA reg. No. 352-757 EPA Est. No._______________
|
||
|
||
™
|
||
®Trademarks of Corteva Agriscience and its affiliated companies
|
||
|
||
For product information call: 1-800-258-3033
|
||
|
||
Produced for
|
||
Corteva Agriscience LLC
|
||
9330 Zionsville Road
|
||
Indianapolis, IN 46268
|
||
|
||
|
||
NET WEIGHT:: ___________
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 13
|
||
|
||
|
||
(Booklet Cover /
|
||
Small Container
|
||
Base Label):
|
||
|
||
Enlite®
|
||
[Alternate Brand Name: DuPont Enlite®]
|
||
|
||
HERBICIDE
|
||
|
||
Unit area pack, the entire contents of this package must be emptied into the spray tank
|
||
For preplant and preemergence weed control in soybeans.
|
||
Dispersible Granules
|
||
A c t i v e I n g r e d i e n t s B y W e i g h t
|
||
Chlorimuron ethyl
|
||
Ethyl 2-[[[[(4-chloro-6-methoxypyrimidin-2-yl)amino]carbonyl]
|
||
amino]sulfonyl]benzoate 2.85%
|
||
Flumioxazin
|
||
2-[7-fluor-3,4-dihydro-3oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl]
|
||
-4,5,6,7-tetrahydro-1H-isoindole -1,3(2H)-dione 36.21%
|
||
Thifensulfuron methyl
|
||
Methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino]
|
||
sulfonyl]-2-thiophenecarboxylate 8.80%
|
||
Other Ingredients 5 2 . 1 4 %
|
||
TOTAL 100.00%
|
||
|
||
Keep Out of Reach of Children
|
||
CAUTION
|
||
|
||
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do
|
||
not understand this label, find someone to explain it to you in detail.)
|
||
|
||
AGRICULTURAL USE REQUIREMENTS
|
||
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
|
||
part 170. Refer to the booklet under "Agricultural Use Requirements" in the Directions for Use section
|
||
for information about this statement.
|
||
|
||
Refer to the inside of label booklet for additional precautionary information including First Aid and
|
||
Directions For Use.
|
||
|
||
Notice: Read the entire label. Use only according to label directions. Before using this product, read
|
||
Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies at end of label booklet. If
|
||
terms are unacceptable, return at once unopened.
|
||
|
||
DO NOT transport if this container is damaged or leaking. If the container is damaged, leaking or
|
||
obsolete, or in the event of a major spill, fire or other emergency, contact 1-800-992-5994, day or night.
|
||
|
||
EPA reg. No. 352-757 EPA Est. No._______________
|
||
|
||
™
|
||
®Trademarks of Corteva Agriscience and its affiliated companies
|
||
|
||
CHLORIMURON ETHYL GROUP 2 HERBICIDE
|
||
FLUMIOXAZIN GROUP 14 HERBICIDE
|
||
THIFENSULFURON METHYL GROUP 2 HERBICIDE
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 14
|
||
|
||
|
||
For product information call: 1-800-258-3033
|
||
|
||
Produced for
|
||
Corteva Agriscience LLC
|
||
9330 Zionsville Road
|
||
Indianapolis, IN 46268
|
||
|
||
NET WEIGHT: ___________
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 15
|
||
|
||
|
||
(Page 1 through end):
|
||
FIRST AID
|
||
|
||
IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin immediately with plenty of
|
||
water for 15-20 minutes. Call a poison control center or doctor for treatment advice.
|
||
IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact
|
||
lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or
|
||
doctor for treatment advice.
|
||
IF INHALED: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give
|
||
artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for
|
||
further treatment advice.
|
||
IF SWALLOWED: Call poison control center or doctor immediately for treatment advice. Have person
|
||
sip a glass of water if able to swallow. DO NOT induce vomiting unless told to do so by the poison
|
||
control center or doctor. DO NOT give anything by mouth to an unconscious person.
|
||
Have the product container or label with you when calling a poison control center or doctor, or going for
|
||
treatment. You may also contact 1-800-992-5994 for emergency medical treatment information.
|
||
|
||
|
||
Precautionary Statements
|
||
Hazards to Humans and Domestic Animals
|
||
CAUTION
|
||
|
||
Harmful if swallowed, absorbed through skin or inhaled. Causes moderate eye irritation. Avoid
|
||
contact with skin, eyes or clothing. Avoid breathing dust or spray mist. Remove and wash
|
||
contaminated clothing before reuse.
|
||
|
||
PERSONAL PROTECTIVE EQUIPMENT (PPE)
|
||
|
||
Mixers, loaders, applicators, and other handlers must wear:
|
||
• Long-sleeved shirt and long pants
|
||
• Wear barrier laminate, butyl rubber ( 14 mils), nitrile rubber ( 14 mils), neoprene rubber ( 14
|
||
mils), natural rubber ( 14 mils), polyethylene, polyvinyl chloride ( 14 mils), or viton ( 14 mils)
|
||
gloves.
|
||
• Shoes plus socks
|
||
|
||
Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washables
|
||
exists, use detergent and hot water. Keep and wash PPE separately from other laundry.
|
||
|
||
Engineering Control Statements
|
||
|
||
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements
|
||
listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.607 (d)-(f)], the
|
||
handler PPE requirements may be reduced or modified as specified in the WPS.
|
||
|
||
Important: When reduced PPE is worn because a closed system is being used, handlers must be
|
||
provided all PPE specified above for “Applicators and Other Handlers” and have such PPE immediately
|
||
available for use in an emergency, such as a spill or equipment breakdown.
|
||
|
||
USER SAFETY RECOMMENDATIONS
|
||
USERS SHOULD:
|
||
• Wash thoroughly with soap and water after handling and before eating, drinking, chewing
|
||
gum, using tobacco or using the toilet.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 16
|
||
|
||
|
||
• Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on
|
||
clean clothing.
|
||
• Remove PPE immediately after handling this product. Wash the outside of gloves before
|
||
removing. As soon as possible, wash thoroughly and change into clean clothing.
|
||
|
||
ENVIRONMENTAL HAZARDS
|
||
|
||
This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to
|
||
areas where surface water is present or to intertidal areas below the mean high water mark. Drift or runoff
|
||
may be hazardous to non-target plants and aquatic organisms in neighboring areas. DO NOT apply
|
||
where runoff is likely to occur. DO NOT apply when weather conditions favor drift from treated areas. DO
|
||
NOT contaminate water when cleaning equipment or disposing of equipment washwaters or rinsate.
|
||
|
||
Groundwater Advisory
|
||
This product has properties and characteristics associated with chemicals detected in groundwater. This
|
||
product may leach into groundwater if used in areas where soils are permeable, particularly where the
|
||
water table is shallow.
|
||
|
||
Surface Water Advisory
|
||
This product may impact surface water quality due to runoff of rainwater. This is especially true for poorly
|
||
draining soils and soils with shallow ground water. This product is classified as having high potential for
|
||
reaching surface water via runoff for several months or more after application. A level, well-maintained
|
||
vegetative buffer strip between areas to which this product is applied and surface water features such as
|
||
ponds, streams, and springs will reduce the potential loading of this product from runoff water and
|
||
sediment. Runoff of this product will be greatly reduced by avoiding applications when rainfall or irrigation
|
||
is expected to occur within 48 hours.
|
||
|
||
Windblown Soil Particles Advisory
|
||
This product has the potential to move off-site due to wind erosion. Soils that are subject to wind erosion
|
||
usually have a high silt and/or fine to very fine sand fractions and low organic matter content. Other
|
||
factors which can affects the movement of windblown soil include the intensity and direction of prevailing
|
||
winds, vegetative cover, site slope, rainfall, and drainage patterns. Avoid applying this product if
|
||
prevailing local conditions may be expected to result in off-site movement.
|
||
|
||
Non-target Organism Advisory
|
||
This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms,
|
||
including pollinators, in areas adjacent to the treated area. Protect the forage and habitat of non-target
|
||
organisms by minimizing spray drift. For further guidance and instructions on how to minimize spray drift,
|
||
refer to the Spray Drift management section of this label.
|
||
|
||
DIRECTIONS FOR USE
|
||
|
||
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
|
||
|
||
DO NOT apply this product in a way that will contact workers or other persons, either directly or through
|
||
drift. Only protected handlers may be in the area during application. For any requirements specific to your
|
||
State or Tribe, consult the agency responsible for pesticide regulation.
|
||
|
||
Enlite herbicide, also referred to as Enlite
|
||
® herbicide or Enlite, must be used only in accordance with
|
||
instructions on this label or as otherwise permitted by FIFRA. Always read the entire label, including the
|
||
Limitation of Warranty and Liability.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 17
|
||
|
||
|
||
AGRICULTURAL USE REQUIREMENTS
|
||
Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR
|
||
part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests,
|
||
nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training,
|
||
decontamination, notification, and emergency assistance. It also contains specific instructions and
|
||
exceptions pertaining to the statements on this label about personal protective equipment(PPE) and
|
||
restricted-entry interval. The requirements in this box only apply to uses of this product that are covered
|
||
by the Worker Protection Standard.
|
||
|
||
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12
|
||
hours.
|
||
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and
|
||
that involves contact with anything that has been treated, including plants, soil, or water, is:
|
||
• Coveralls
|
||
• Wear barrier laminate, butyl rubber ( 14 mils), nitrile rubber ( 14 mils), neoprene rubber ( 14
|
||
mils), natural rubber ( 14 mils), polyethylene, polyvinyl chloride ( 14 mils), or viton ( 14 mils)
|
||
gloves.
|
||
• Shoes plus socks
|
||
|
||
PRODUCT INFORMATION
|
||
|
||
Enlite herbicide is a dispersible granule formulation to be mixed with water at a rate of 2.8 to 4.25 ounces
|
||
(refer to rate summary table in APPLICATION INFORMATION section for lb ai equivalents) per acre, and
|
||
sprayed for selective burndown and limited residual weed control in soybeans. When applied according to
|
||
the instructions on this label, it will control many broadleaf weeds and provide partial control of certain
|
||
annual grasses.
|
||
|
||
Crop injury may occur from applications made to poorly drained soils under cool, wet conditions. Risk of
|
||
crop injury can be minimized by not using on poorly drained soils, planting at least 1.5 inches deep and
|
||
completely covering seeds with soil prior to preemergence applications.
|
||
|
||
Residual applications of Enlite require rainfall or sprinkler irrigation to activate the herbicide. Degree of
|
||
control and duration of effect depend on: rate used, weed spectrum, growing conditions at and following
|
||
time of treatment, soil pH, texture, organic matter, moisture and precipitation.
|
||
|
||
Best residual control is obtained if Enlite is applied to moist soil and followed by rainfall or irrigation (~1
|
||
inch) before weeds germinate. Several small rainfalls of less than 0.25 inch each are not as beneficial as
|
||
one large rainfall of 0.5 - 1 inch. On dry soil, more moisture is required for activation (1- 2 inches) before
|
||
weed emergence. If moisture is insufficient to activate the herbicide, a rotary hoeing or shallow cultivation
|
||
needs to be made after emergence of the crop while weeds are small enough to be controlled by
|
||
mechanical means. Deep cultivation reduces the effectiveness of Enlite and needs to be avoided.
|
||
|
||
Excessive rainfall received in a short period of time following the emergence of soybeans treated with a
|
||
preplant or preemergence application of Enlite herbicide may cause minor leaf burn, crinkling, or
|
||
defoliation of some lower leaves of the soybean plants.
|
||
|
||
During the growing season, excessive periods of rainfall and cool, cloudy weather may cause temporary
|
||
soybean stunting. Soybeans rapidly outgrow stunting once favorable (sunny, warm temperatures)
|
||
conditions return.
|
||
|
||
BIOLOGICAL ACTIVITY
|
||
|
||
Enlite has two modes of action and rapidly inhibits the growth of susceptible weed species. Following
|
||
application of preplant or preemergence treatment, susceptible weeds may germinate and emerge, but
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 18
|
||
|
||
|
||
growth then ceases and leaves become yellow and/or brown by 3-5 days after emergence. Death of leaf
|
||
tissue and growing point will follow in some species while others will remain green but stunted and
|
||
noncompetitive. Following a burndown application, growth of susceptible weeds ceases followed by
|
||
tissue yellowing and browning and death of the growing point. Enlite provides partial control of some
|
||
annual grasses when used pre-plant or preemergence but other products may be needed to ensure
|
||
adequate grass control.
|
||
|
||
RESTRICTIONS
|
||
|
||
• DO NOT use for crops other than soybeans.
|
||
• DO NOT exceed the full labeled rate for the geography. A maximum of two applications, not to
|
||
exceed the total fully labeled rate of Enlite, may be made per year.
|
||
• DO NOT apply more than a total of 0.82 ounces (0.0513 lb) active ingredient per acre
|
||
chlorimuron ethyl in the Northern and Central Region states or 1.07 ounces (0.0669 lb) active
|
||
ingredient per acre chlorimuron ethyl in the Southern Region states per year. This includes
|
||
combinations of preemergence applications of Enlite, as well as chlorimuron ethyl from other
|
||
application(s).
|
||
• DO NOT apply this product through any type of irrigation system.
|
||
• DO NOT apply Enlite to frozen or snow covered ground.
|
||
• DO NOT perform any tillage operations after fall applications or residual weed control will be
|
||
reduced.
|
||
• DO NOT apply Enlite to cracking soybeans or after the soybean crop has emerged as severe
|
||
injury or death of the crop will occur.
|
||
• DO NOT irrigate when soybeans are cracking.
|
||
• DO NOT apply Enlite within 14 days before or after an application of an organophosphate
|
||
insecticide on any soybean variety that is not sulfonylurea tolerant soybean, as severe crop
|
||
injury may occur.
|
||
• DO NOT apply this product by air within 40 feet of nontarget plants including non-target crops.
|
||
• DO NOT apply this product by air within 100 ft. of emerged cotton crops.
|
||
• DO NOT apply this product by air within 40 feet of streams, wetlands, marshes, ponds, lakes and
|
||
reservoirs.
|
||
• DO NOT apply Enlite by air in the state of New York.
|
||
• DO NOT apply to land that has been or will be treated with metsulfuron and/or chlorsulfuron-
|
||
containing herbicides in Nebraska and Kansas without observing the rotational crop intervals for
|
||
those products.
|
||
• DO NOT apply or drain or flush equipment on or near desirable trees or other plants, or on areas
|
||
where their roots may extend, or in locations where the chemical may be washed or moved into
|
||
contact with their roots, or injury to desirable trees and plants may occur.
|
||
• DO NOT use on lawns, walks, driveways or tennis courts.
|
||
• DO NOT contaminate any body of water.
|
||
• DO NOT mix/load or use within 50 feet of all wells including abandoned wells, drainage wells, and
|
||
sink holes.
|
||
• DO NOT apply this product when weather conditions favor spray drift from treated areas.
|
||
• DO NOT discharge excess material on the soil at a single spot in the field or mixing/loading
|
||
station.
|
||
• DO NOT graze treated fields or harvest for forage or hay.
|
||
• DO NOT
|
||
use low pressure and high volume hand wand equipment.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 19
|
||
|
||
|
||
Use Restriction Summary Table for Enlite:
|
||
CROPS
|
||
Maximum
|
||
Oz of Product/
|
||
Acre/ Single
|
||
Application
|
||
Maximum
|
||
Lb AI/
|
||
Acre/Single
|
||
Application
|
||
Maximum
|
||
Number of
|
||
Applications
|
||
per
|
||
Year
|
||
Maximum
|
||
Oz of
|
||
Product
|
||
/Acre/Year
|
||
Maximum
|
||
Lb AI/A
|
||
per
|
||
Year
|
||
Retreat
|
||
Interval
|
||
(Days)
|
||
Last
|
||
Treatment
|
||
Preharvest
|
||
Interval
|
||
Soybean 4.25 oz
|
||
0.0076 lb ai
|
||
chlorimuron +
|
||
0.0962 lb ai
|
||
flumioxazin +
|
||
0.0234 lb ai
|
||
thifensulfuron
|
||
2 4.25 oz
|
||
0.0076 lb ai
|
||
chlorimuron +
|
||
0.0962 lb ai
|
||
flumioxazin +
|
||
0.0234 lb ai
|
||
thifensulfuron
|
||
14 days 90 days
|
||
|
||
You must empty the entire contents of the Enlite unit area package into the spray tank when dispensed
|
||
through a multi-product dispensing system. Each dispensed amount of product is designed for a specific
|
||
spray load, acreage, and use rate.
|
||
|
||
PRECAUTIONS
|
||
|
||
• Use only in the geographies identified in the "Geographic Use Regions" section of this label.
|
||
• Prior to using Enlite herbicide, consideration needs to be given to crop rotation plans. Crops other
|
||
than soybeans may be extremely sensitive to low concentrations of Enlite remaining in the soil the
|
||
next planting season. Choice of rotation crop is restricted following application of Enlite. (See
|
||
"ROTATIONAL CROP GUIDELINES" for your geographical region).
|
||
• Crop injury may occur from applications made to poorly drained soils under cool, wet conditions.
|
||
• Excessive rainfall received in a short period of time following the emergence of soybeans treated with
|
||
a preplant or preemergence application of Enlite herbicide may cause minor leaf burn, crinkling, or
|
||
defoliation of some lower leaves of the soybean plants.
|
||
• Excessive periods of rainfall and cool, cloudy weather may cause temporary soybean stunting.
|
||
• Seedling disease, nematodes, cold weather, deep planting (more than 2 inches), excessive moisture,
|
||
high salt concentration, or drought may weaken soybean seedlings and increase possibility of crop
|
||
injury.
|
||
• Calibrate sprayers only with clean water away from the well site. Make scheduled checks of spray
|
||
equipment. Ensure that all operation employees accurately measure pesticides. Mix only enough
|
||
product for the job at hand. and avoid overfilling of spray tank.
|
||
• When triple-rinsing the pesticide container, be sure to add the rinsate to the spray mix.
|
||
• Thoroughly clean Enlite from application equipment immediately after use and prior to spraying crops
|
||
other than soybeans. Failure to remove even small amounts of Enlite from application equipment may
|
||
result in injury to subsequently sprayed crops.
|
||
• Enlite can be applied in tank mixtures with organophosphate insecticides or at any time preceding or
|
||
following an application of an organophosphate insecticide prior to emergence of any sulfonylurea
|
||
tolerant soybean variety. Tank mixtures of Enlite plus organophosphate insecticides applied preplant
|
||
or preemergence to sulfonylurea tolerant soybean varieties may result in minor transient crop
|
||
response (i.e. stunting and/or chlorosis).
|
||
• Prevent drift spray to desirable plants.
|
||
• Keep from contact with fertilizers, insecticides, fungicides and seeds during storage. Avoid storage
|
||
of pesticides near well sites.
|
||
|
||
WEED RESISTANCE MANAGEMENT
|
||
For resistance management, Enlite contains both a Group 2 and a Group 14 herbicide. Any weed
|
||
population may contain or develop plants naturally resistant to Enlite and other Group 2 and/or Group 14
|
||
herbicides. The resistant biotypes may dominate the weed population if these herbicides are used
|
||
repeatedly in the same field. Appropriate resistance management strategies should be followed.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 20
|
||
|
||
|
||
Proactively implementing diversified weed control strategies to minimize selection for weed populations
|
||
resistant to one or more herbicides is a best practice. A diversified weed management program may
|
||
include the use of multiple herbicides with different sites of action and overlapping weed spectrum with or
|
||
without tillage operations and/or other cultural practices. Research has demonstrated that using the
|
||
labeled rate and directions for use is important to delay the selection for resistance.
|
||
The continued effectiveness of this product depends on the successful implementation of a weed
|
||
resistance management program.
|
||
To aid in the prevention of developing weeds resistant to this product, users should:
|
||
• Scout fields before application to ensure herbicides and rates will be appropriate for the weed
|
||
species and weed sizes present.
|
||
• Start with a clean field, using either a burndown herbicide application or tillage.
|
||
Control weeds early when they are relatively small (less than 4 inches).
|
||
• Apply full rates of Enlite herbicide for the most difficult to control weed in the field at the specified
|
||
time (correct weed size) to minimize weed escapes.
|
||
• Scout fields after application to detect weed esc apes or shifts in control of weed species.
|
||
Control weed escapes before they reproduce by seed or proliferate vegetatively.
|
||
• Report any incidence of non-performance of this product against a particular weed to your
|
||
company representative, local retailer, or county extension agent.
|
||
• Contact your local company representative, crop advisor, or extension agent to find out if
|
||
suspected resistant weeds to this MOA have been found in your region. If resistant biotypes of
|
||
target weeds have been reported, use the application rates of this product specified for your local
|
||
conditions. Tank mix products so that there are multiple effective sites of actions for each target
|
||
weed.
|
||
• If resistance is suspected, treat weed escapes with an herbicide having a site of action other than
|
||
Group 2 or 14 and/or use nonchemical methods to remove escapes, as practical, with the goal of
|
||
preventing further seed production.
|
||
• Suspected herbicide-resistant weeds may be identified by these indicators:
|
||
• Failure to control a weed species normally controlled by the herbicide at the dose applied,
|
||
especially if control is achieved on adjacent weeds;
|
||
• A spreading patch of non-controlled plants of a particular weed species; and
|
||
• Surviving plants mixed with controlled individuals of the same species.
|
||
|
||
Additionally, users should follow as many of the following herbicide resistance management practices as
|
||
is practical:
|
||
• Use a broad spectrum soil-applied herbicide with other sites of action as a foundation in a weed
|
||
control program.
|
||
• Utilize sequential applications of herbicides with alternative sites of action.
|
||
• Rotate the use of this product with non-Group 2 or 14 herbicides.
|
||
• Avoid making more than two applications Enlite and any other Group 2 or 14 herbicides within a
|
||
single growing season unless mixed with an herbicide with a different site of action with an
|
||
overlapping spectrum for the difficult-to-control weeds.
|
||
• Incorporate non-chemical weed control practices, including mechanical cultivation, crop rotation,
|
||
cover crops and weed-free crop seeds, as part of an integrated weed control program.
|
||
• Use good agronomic principles that enhance crop development and crop competitiveness.
|
||
• Thoroughly clean plant residues from equipment before leaving fields suspected to contain
|
||
resistant weeds. 'Manage weeds in and around fields, during and after harvest to reduce weed
|
||
seed production.
|
||
• Manage weeds in and around fields, during and after harvest to reduce weed seed production.
|
||
|
||
INTEGRATED PEST MANAGEMENT
|
||
This product may be used as part of an Integrated Pest Management (IPM) program that can include
|
||
biological, cultural, and genetic practices aimed at preventing economic pest damage. IPM principles and
|
||
practices include field scouting or other detection methods, correct target pest identification, population
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 21
|
||
|
||
|
||
monitoring, and treating when target pest populations reach locally determined action thresholds. Consult
|
||
your state cooperative extension service, professional consultants or other qualified authorities to
|
||
determine appropriate action treatment threshold levels for treating specific pest/crop systems in your
|
||
area.
|
||
|
||
MANDATORY SPRAY DRIFT MANAGEMENT
|
||
Ground Boom Applications:
|
||
• User must only apply with the release height recommended by the manufacturer, but not
|
||
more than 3 feet above the ground or crop canopy.
|
||
• Applicators must select nozzle and pressure that deliver medium or coarser droplets in
|
||
accordance with American Society of Agricultural &Biological Engineers Standard 572
|
||
(ASABE S572).
|
||
• DO NOT apply when wind speeds exceed 15 mph at the application site.
|
||
• DO NOT apply during temperature inversions
|
||
|
||
Aerial Applications
|
||
• DO NOT release spray at a height greater than 10 ft above the ground or vegetative
|
||
canopy, unless a greater application height is necessary for pilot safety.
|
||
• Applicators must select nozzle and pressure that deliver Medium or coarser
|
||
droplets in accordance with the American Society of Agricultural & Biological
|
||
Engineers Standard 641 (ASABE S641).
|
||
• If the windspeed is 10 miles per hour or less, applicators must use ½ swath
|
||
displacement upwind at the downwind edge of the field. When the windspeed is
|
||
between 11-15 miles per hour, applicators must use ¾ swath displacement upwind
|
||
at the downwind edge of the field.
|
||
• DO NOT apply when wind speeds exceed 15 mph at the application site. If the
|
||
windspeed is greater than 10 mph, the boom length must be 65% or less of the
|
||
wingspan for fixed wing aircraft and 75% or less of the rotor diameter for
|
||
helicopters. Otherwise, the boom length must be 75% or less of the wingspan for
|
||
fixed-wing aircraft and 90% or less of the rotor diameter for helicopters.
|
||
• DO NOT apply during temperature inversions.
|
||
|
||
Boom-less Ground Applications
|
||
• Applicators must select nozzle and pressure that deliver medium or coarser droplets in accordance
|
||
with American Society of Agricultural &Biological Engineers Standard 572 (ASABE S572).
|
||
• DO NOT apply when wind speeds exceed 15 mph at the application site.
|
||
• DO NOT apply during temperature inversions.
|
||
|
||
|
||
SPRAY DRIFT ADVISORIES
|
||
|
||
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
|
||
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
|
||
|
||
IMPORTANCE OF DROPLET SIZE
|
||
|
||
An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide
|
||
target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be
|
||
greater if applications are made improperly or under unfavorable environmental conditions.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 22
|
||
|
||
|
||
Controlling Droplet Size – Ground Boom
|
||
|
||
• Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use
|
||
the highest practical spray volume for the application. If a greater spray volume is needed, consider
|
||
using a nozzle with a higher flow rate.
|
||
• Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray
|
||
volume and droplet size.
|
||
• Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider
|
||
using nozzles designed to reduce drift.
|
||
|
||
Controlling Droplet Size – Aircraft
|
||
|
||
• Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles.
|
||
Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight.
|
||
|
||
BOOM HEIGHT – Ground Boom
|
||
Use the lowest boom height that is compatible with the spray nozzles that will provide uniform coverage.
|
||
For ground equipment, the boom should remain level with the crop and have minimal bounce.
|
||
|
||
RELEASE HEIGHT – Aircraft
|
||
|
||
Higher release heights increase the potential for spray drift. When applying aerially to crops, DO NOT
|
||
release spray at a height greater than 10 ft above the crop canopy, unless a greater application height
|
||
is necessary for pilot safety.
|
||
|
||
BOOM-LESS GROUND APPLICATIONS:
|
||
Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.
|
||
|
||
HANDHELD TECHNOLOGY APPLICATIONS:
|
||
Take precautions to minimize spray drift.
|
||
|
||
SHIELDED SPRAYERS
|
||
Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers.
|
||
Verify that the shields are not interfering with the uniform deposition of the spray on the target area.
|
||
|
||
TEMPERATURE AND HUMIDITY
|
||
When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.
|
||
|
||
TEMPERATURE INVERSIONS
|
||
Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing
|
||
temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence
|
||
of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft
|
||
smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions)
|
||
indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing.
|
||
|
||
Avoid applications during temperature inversions.
|
||
|
||
WIND
|
||
|
||
Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND
|
||
CONDITIONS.
|
||
|
||
Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 23
|
||
|
||
|
||
DRIFT CONTROL ADDITIVES
|
||
Using product compatible drift control additives can reduce drift potential. When a drift control additive is
|
||
used, read and carefully observe cautionary statements and all other information on the additive’s label. If
|
||
using an additive that increases viscosity, ensure that the nozzles and other application equipment will
|
||
function properly with a viscous spray solution. Preferred drift control additives have been certified by the
|
||
Council of Producers & Distributors of Agrotechnology (CPDA).
|
||
|
||
APPLICATION INFORMATION – ALL USES
|
||
|
||
• Enlite herbicide is a dispersible granule formulation which readily disperses in water.
|
||
• Enlite may be used in conventional, no-till, or conservation tillage soybean production.
|
||
|
||
Application Rate Summary Table for Enlite:
|
||
|
||
Rate of Enlite Pounds of Active
|
||
Ingredient
|
||
Chlorimuron ethyl
|
||
Pounds of Active
|
||
Ingredient
|
||
Flumioxazin
|
||
Pounds of Active
|
||
Ingredient
|
||
Thifensulfuron methyl
|
||
2.8 oz 0.0049 0.0634 0.0154
|
||
3.25 oz 0.0058 0.0736 0.0179
|
||
4.25 oz 0.0076 0.0962 0.0234
|
||
|
||
|
||
GEOGRAPHIC USE REGIONS
|
||
|
||
The geographical use regions for Enlite are defined as follows:
|
||
|
||
Northern Region: The states of Connecticut, Iowa (west of State Route 63 and north of I-80), Maine,
|
||
Massachusetts, Minnesota, Nebraska (fields north of route 30 or west of Route 281), New Hampshire,
|
||
New York (fields north of Interstate 90), Rhode Island, South Dakota, Vermont and Wisconsin (fields
|
||
north of Interstate 90 between Lacrosse and Madison and fields north of Interstate 94 between Madison
|
||
and Milwaukee).
|
||
|
||
Central/Southern Region: The states of Arkansas, Delaware, Illinois, Indiana, Iowa (east of State Route
|
||
63 or south of I-80), Kansas, Kentucky, Louisiana, Maryland, Michigan, Mississippi, Missouri, Nebraska
|
||
(fields south of Route 30 and east of Route 281), New Jersey, New York (fields south of Interstate 90),
|
||
Ohio, Oklahoma, Pennsylvania, Tennessee, Texas (fields east of Route 183), Virginia, West Virginia and
|
||
Wisconsin (fields south of Interstate 90 between Lacrosse and Madison and fields south of Interstate 94
|
||
between Madison and Milwaukee).
|
||
|
||
ENLITE UNIT AREA PACKAGE –MULTI-PRODUCT DISPENSING SYSTEM
|
||
When dispensed through a multi-product dispensing system, Enlite herbicide is available in a unit area
|
||
package that is used at the rate of 2.8 - 4.25 ounces per acre per application. Each dispensed amount of
|
||
product is designed for a specific spray load, acreage, and use rate. After opening the Enlite unit area
|
||
package, you must completely empty the entire contents into the spray tank.
|
||
|
||
APPLICATION TIMING
|
||
Enlite may be applied any time from fall through spring, up to 3 days after planting and prior to soybean
|
||
emergence.
|
||
DO NOT apply Enlite to cracking soybeans or after the soybean crop has emerged as severe injury or
|
||
death of the crop will occur.
|
||
PLANNED SEQUENTIAL PROGRAMS
|
||
For season-long control in soybeans, follow Enlite with sequential programs based on the targeted
|
||
weeds. Where appropriate, and following guidance provided by labeling, use chlorimuron ethyl in a
|
||
planned sequential application program for enhanced broadleaf and sedge control.
|
||
To ensure maximal rotational flexibility when considering a sequential program of Enlite followed by other
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 24
|
||
|
||
|
||
herbicides containing chlorimuron ethyl, carefully consider: the soil pH, the specifications below, and the
|
||
Rotational Crop Guidelines in this label.
|
||
For glyphosate-resistant soybeans, Enlite can be followed by an in-crop application of a glyphosate
|
||
product registered for this type of application with appropriate tank mix partners and adjuvant products.
|
||
For glufosinate- resistant soybeans, Enlite can be followed by an in-crop application of a glufosinate
|
||
containing product registered for this type of application with appropriate tank mix partners and adjuvant
|
||
products.
|
||
Read and follow all label directions and precautions for use of the respective sequential partner before
|
||
using in a sequential program. Follow the most restrictive labeling. Consult a local Corteva Agriscience
|
||
representative; fact sheets or technical bulletins for additional information.
|
||
|
||
WEEDS CONTROLLED
|
||
|
||
Fall or Spring Burndown of Emerged Weeds
|
||
|
||
Apply Enlite when weeds are young and actively growing. Applications made to weeds larger than the
|
||
indicated sizes, or to weeds under stress, may result in unsatisfactory control.
|
||
For best results, apply to annual broadleaf weeds that are up to 3 inches in height or diameter and to
|
||
perennial broadleaf weeds that are up to 6 inches in height or diameter.
|
||
|
||
For the best burndown results, the addition of 2,4-D LVE is advised, and is required for control of some
|
||
weeds.
|
||
|
||
When used for burndown, Enlite is rainfast after 1 hour.
|
||
|
||
For burndown of larger annual grasses or broadleaf weeds exceeding 1-3”, or for burndown of weeds not
|
||
listed, Enlite may be tankmixed with one or more of the following:
|
||
|
||
tribenuron-methyl
|
||
thifensulfuron-methyl + tribenuron methyl
|
||
dicamba
|
||
glufosinate
|
||
glyphosate
|
||
paraquat
|
||
saflufenacil*
|
||
2,4-D (LVE)
|
||
|
||
Please consult the label of specific tank mix partners for specific information on weeds controlled and
|
||
plant back intervals following application.
|
||
|
||
Reduced residual weed control may occur when burndown applications are made to fields where heavy
|
||
crop and/or weed residue exist.
|
||
|
||
*Refer to the saflufenacil label for restrictions when tank mixing with products containing Group 14/Group E
|
||
herbicides.
|
||
|
||
Use the higher rates of Enlite for improved and longer residual activity. Enlite herbicide, applied at 2.8
|
||
to 4.25 ounces per acre, will burndown the following weeds.
|
||
|
||
Burndown Control of Emerged Winter Annual, Perennial, and Summer Annual Weeds
|
||
Annual knawel London rocket
|
||
Annual sowthistle Marestail (horseweed)*
|
||
Buckwheat, common, wild Mallow (common*, little)
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 25
|
||
|
||
|
||
Bushy wallflower/Treacle mustard Marshelder
|
||
Canola, volunteer* Miners lettuce
|
||
Carolina geranium Mustard, black, Jim Hill, tansy, tumble, wild
|
||
Chamomile, corn, false, wild Peas, volunteer
|
||
Chickweed, common*, mouseear Prickly lettuce*
|
||
Coast fiddleneck Prostrate knotweed
|
||
Cockle, white Redmaids
|
||
Cocklebur* Redroot pigweed
|
||
Corn spurry Russian thistle*
|
||
Cress (mouse-ear) Scentless chamomile/mayweed
|
||
Curly dock Shepherd’s-purse
|
||
Cutleaf evening primrose* Smallflower buttercup
|
||
Dandelion* Smartweed, green, ladysthumb, Pennsylvania
|
||
Deadnettle* Stinking mayweed/Dogfennel
|
||
Field pennycress Sunflower*
|
||
Flixweed Swinecress
|
||
Groundsel, common, cress leaf (butterweed) Tarweed fiddleneck
|
||
Henbit Velvetleaf
|
||
Kochia * Wild garlic*
|
||
Lambsquarters Wild radish*
|
||
Lentils, volunteer
|
||
|
||
*Enlite provides stand reduction or suppression of these weed species. For complete control of these weeds and
|
||
others not listed above consider tank mixing Enlite with 2,4-D, dicamba, glyphosate, and/or other herbicides
|
||
labeled for pre-plant burndown applications in soybeans. Please consult the label of specific tank mix partners for
|
||
specific information on weeds controlled and plant back intervals following application.
|
||
|
||
Chickweed Burndown
|
||
|
||
For best results: add 0.08 - 0.25 ounces per acre of active ingredient tribenuron methyl, or 0.3 ounces per acre
|
||
thifensulfuron methyl +tribenuron methyl, to Enlite for control of up to 6 inch common chickweed. For heavy
|
||
matted infestations, use the higher end of the rate range. For lighter infestations of non-matted chickweed, use
|
||
the lower end of the rate range. For other weeds controlled, refer to the labels. Refer to the labels for specific
|
||
plant back interval information.
|
||
|
||
Alternatively, metribuzin or glyphosate-containing products registered for soybeans may be added for
|
||
chickweed burndown.
|
||
|
||
Limitations
|
||
|
||
DO NOT perform any tillage operations after fall applications or residual weed control will be reduced
|
||
Abnormally warm or wet winters will reduce the length of weed control observed in the spring.
|
||
|
||
Spray Additives
|
||
|
||
Applications of Enlite used for burndown must include either a crop oil concentrate or a nonionic surfactant. Crop
|
||
oil concentrate is the required adjuvant system unless tank mixing with a product that does not allow use of crop
|
||
oil concentrate. Consult local Corteva Agriscience fact sheets, technical bulletins, and service policies prior to
|
||
using other adjuvant systems. If another herbicide is tank mixed with Enlite, select adjuvants authorized for use
|
||
with both products. Adjuvants must contain only EPA-exempt ingredients.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 26
|
||
|
||
|
||
Crop Oil Concentrate (COC) - Petroleum or Modified Seed Oil (MSO)
|
||
|
||
• Apply at 1% v/v (1 gal per 100 gal spray solution) or 2% under arid conditions.
|
||
• Oil adjuvants must contain at least 80% high quality, petroleum (mineral) or modified vegetable
|
||
seed oil with at least 15% surfactant emulsifiers.
|
||
|
||
Nonionic Surfactant (NIS)
|
||
• Apply at 0.25% v/v (1 qt per 100 gal spray solution) or 0.5% under arid conditions.
|
||
• Surfactant products must contain at least 60% nonionic surfactant with a hydrophilic/lipophilic balance
|
||
(HLB) greater than 12.
|
||
|
||
Weeds Controlled - Preemergence
|
||
When used according to this label, Enlite at 2.8 to 4.25 ounces per acre can provide preemergence
|
||
control or suppression of the weeds listed below contributing to a clean seedbed at planting. Length of
|
||
residual control depends on rate used, soil type and quality of activation. Lower rates are advised for
|
||
planned sequential programs and higher rates are advised for full-season programs.
|
||
|
||
Broadleaf Weeds - 2.8 to 4.25 ounces per acre
|
||
|
||
Bristly Starbur* Nightshade: Eastern black, black, hairy
|
||
Carolina geranium Nutsedge, yellow
|
||
Carpetweed Pigweed: redroot, smooth, spiny, tumble
|
||
Chickweed: common, mousear Prickly sida
|
||
Copperleaf hornbeam* Puncturevine
|
||
Dandelion Purslane, common
|
||
Eclipta Radish, wild
|
||
Evening primrose, cutleaf Redsmaids
|
||
Florida pusley Russian thistle*
|
||
Henbit Shepherd’s-purse
|
||
Jimsonweed Smellmelon*
|
||
Kochia Spurge, spotted
|
||
Lambsquarters, common Waterhemp**, common, tall
|
||
Mallow: Venice, little Wild buckwheat*
|
||
Marestail Wormwood, biennial*
|
||
Morningglory, smallflower
|
||
|
||
Additional weeds controlled with Enlite at 3.5 to 4.25 ounces per acre:
|
||
|
||
Amaranth (pigweed), Palmer** Mornin gglories, entire leaf, ivyleaf, pitted, tall
|
||
Coffee Senna Poinsettia, wild
|
||
Cocklebur* Ra gweed, common, giant*
|
||
Croton, tropic Sicklepod*
|
||
Florida Be
|
||
ggarweed Smartweed, Lad ysthumb, Pennsylvania
|
||
Hemp Sesbania Velvetleaf
|
||
|
||
*suppression only
|
||
**A postemergence herbicide such as fomesafen or lactofen may be needed following a preemergence
|
||
application of Enlite for adequate control in fields with heavy pressure.
|
||
|
||
Grass Weeds*- 2.8 to 4.25 ounces per acre
|
||
|
||
Barn
|
||
yardgrass Goose grass
|
||
Bluegrass, annual Love grass, California
|
||
Crabgrass, large Panicum, fall, Texas
|
||
Foxtail, giant, yellow Si gnalgrass, broadleaf
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 27
|
||
|
||
|
||
*Enlite provides suppression of all grass weeds listed above.
|
||
|
||
For Season-long Grass Control
|
||
|
||
Enlite may be followed as needed by an in-season application of another registered grass herbicide . Or
|
||
in glyphosate resistant soybeans, Enlite may be followed with an in-season glyphosate product
|
||
application. In glufosinate resistant soybeans, Enlite may be followed with an in-season glufosinate
|
||
product application.
|
||
|
||
Tank Mixes
|
||
|
||
Other than chloroacetamide-containing products noted below, Enlite may be tank mixed with other
|
||
products registered for use in soybeans.
|
||
|
||
It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read
|
||
and follow the applicable restrictions and limitations and directions for use on all product labels involved in
|
||
tank mixing. Users must follow the most restrictive directions for use and precautionary statements of
|
||
each product in the tank mixture.
|
||
|
||
For additional preemerge broadleaf weed control, Enlite may be tank mixed with linuron, metribuzin,
|
||
pendimethalin or pyroxasulfone based products. For additional grass control, Enlite may be tank mixed
|
||
with pendimethalin, pyroxasulfone or clomazone.
|
||
|
||
Enlite may be applied in tank mix combinations with full or reduced rates of other products provided:
|
||
• The tank mix product is labeled for the same timing, method of application, adjuvants, and use
|
||
restrictions as Enlite. ' The tank mix is not specifically prohibited on the label of the tank mix
|
||
product.
|
||
• The tank mix combination is compatible as determined by a “jar test” described in the TANK MIX
|
||
COMPATIBILITY TESTING section below.
|
||
|
||
Weed control and crop safety resulting from the use of tank mixtures not specifically noted on this label,
|
||
or in separately published information, are the responsibility of the user.
|
||
DO NOT apply Enlite within 14 days before or after an application of an organophosphate insecticide on
|
||
any soybean variety that is not an sulfonylurea tolerant soybean variety, as severe crop injury may occur.
|
||
|
||
Enlite can be applied in tank mixtures with organophosphate insecticides or at any time preceding or
|
||
following an application of an organophosphate insecticide prior to emergence of any sulfonylurea
|
||
tolerant soybean variety. Tank mixtures of Enlite plus organophosphate insecticides applied preplant or
|
||
preemergence to sulfonylurea tolerant soybean varieties may result in minor transient crop response (i.e.
|
||
stunting and/or chlorosis).
|
||
|
||
DO NOT tank mix Enlite herbicide with acetochlor, alachlor, flufenacet, S-metolachlor or dimethenamid
|
||
based products within 14 days of planting soybeans, unless soybeans are planted under no-till or
|
||
minimum tillage conditions on wheat stubble or no-till field corn stubble.
|
||
|
||
Tank Mix Compatibility Testing
|
||
|
||
Perform a jar test prior to tank mixing to ensure compatibility of Enlite and other pesticides. Use a clear
|
||
glass quart jar with lid and mix the tank mix ingredients in their relative proportions. Invert the jar
|
||
containing the mixture several times and observe the mixture for approximately 1/2 hour. If the mixture
|
||
balls-up, forms flakes, sludges, gels, oily film or layers, or other precipitates, it is not compatible.
|
||
|
||
ROTATIONAL CROP GUIDELINES - ALL USES
|
||
|
||
For all labeled Fall and Spring Enlite uses, including sequential applications with chlorimuron ethyl, follow
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 28
|
||
|
||
|
||
these rotational guidelines.
|
||
|
||
Crop rotation intervals noted in the table below are based on crops grown under favorable growing
|
||
conditions. Crops grown under unfavorable environmental conditions, including drought, nutrient
|
||
deficiency, high salts, disease and insect pressure may demonstrate reduced tolerance to crop protection
|
||
chemicals. When deciding on a particular crop to replant in your fields, carefully consider your particular
|
||
soil and other field conditions (see IMPORTANCE OF SOIL pH section of this label).
|
||
|
||
• Important: Crops other than soybeans following an Enlite application can vary in their sensitivity
|
||
to low concentrations of Enlite remaining in the soil. Rotational crop guidelines must be followed.
|
||
|
||
Follow Recrop Interval 1 Central/Southern Region:
|
||
|
||
• A maximum of 4.25 ounces per acre of Enlite was applied and can be followed by an application
|
||
of chlorimuron ethyl with a sum total of chlorimuron ethyl not to exceed 0.25 ounces active
|
||
ingredient per acre for the crop season (any soil pH).
|
||
|
||
OR
|
||
|
||
Follow Recrop Interval 2 Northern Region:
|
||
|
||
• A maximum of 2.8 ounces per acre Enlite was applied during the use season (any soil pH).
|
||
• The field has a soil pH 7.0 or less and a maximum of 4.25 ounces per acre Enlite was applied
|
||
during the use season.
|
||
• The field is located in the state of IA and the soil pH is 7.5 or less and a maximum of 4.25 ounces
|
||
per acre Enlite was applied by July 15
|
||
th.
|
||
|
||
Rotational Guidelines
|
||
|
||
For all advised Fall and Spring Uses of Enlite, including sequentials with chlorimuron ethyl
|
||
|
||
Enlite Crop Rotational Interval in Months
|
||
|
||
Crop
|
||
Interval 1
|
||
Central/Southern Region
|
||
Interval 2
|
||
Northern Region
|
||
So
|
||
ybeans 0 0
|
||
Wheat 3 3
|
||
Barley, Winter Rye 4 4
|
||
Dry Beans, Kidney Beans2, Peas, Snap Beans 9 9
|
||
Field Corn* 9 9
|
||
Popcorn 9 2 15
|
||
Sorghum 9 15
|
||
Tobacco (transplant) 9 15
|
||
Tomato (transplant) 9 15
|
||
Peanuts 6 4 6
|
||
Rice 9 4 9
|
||
Cotton 9 9
|
||
Alfalfa/Clover 12 3 10
|
||
Oats 10 10
|
||
Pasture Grasses 12 12
|
||
Cabbage 18 18
|
||
Canola (Rapeseed) 18 18
|
||
Cucumber 18 1 92
|
||
Flax 18 18
|
||
Lentils 18 18
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 29
|
||
|
||
|
||
Mustard 18 18
|
||
Pumpkins 18 18
|
||
Sunflower 18 1 9
|
||
Sweet Corn 9 † 9 †
|
||
Sweet potatoes/yams 30 3 30
|
||
Watermelon 18 1 9 2
|
||
Any crop not listed 30 30
|
||
*The term “Field Corn” is defined to include only that corn grown for grain or silage or for seed corn relative to the Rotation al Crop
|
||
Guidelines section of this label.
|
||
1- Rotational crop intervals are for processing Sweet Corn varieties only. The rotational crop interval for other Sweet Corn varieties
|
||
is 18 months.
|
||
1 If use rate of Enlite is 2.8 ounces per acre then the recrop is 9 months.
|
||
2 Rotational interval is 12 months if no tillage is performed.
|
||
3 In the Southern states of Alabama (except the “Black Belt” where soil pH must be less than 7.0), Arkansas, Florida, Georgia,
|
||
Kentucky, Louisiana, Missouri (Bootheel region only), Mississippi (except the “Black Belt” where soil pH must be less than 7.0),
|
||
North Carolina, Oklahoma, South Carolina, Tennessee and Texas (fields east of Route 183) the recrop is 10 months.
|
||
4 The rotational interval applies only to listed Southern States. In the Central states the listed rotational interval applies only if the
|
||
Enlite use rate is 2.8 ounces per acre, otherwise the rotational interval is 15 months.
|
||
|
||
APPLICATION EQUIPMENT
|
||
|
||
SPRAY TANK PREPARATION
|
||
|
||
It is important that spray equipment is clean and free of existing pesticide deposits before using Enlite.
|
||
Follow the spray tank cleanout procedures specified on the label of product previously sprayed. If no
|
||
cleanout procedure is provided, follow the cleanout procedure below for all application equipment.
|
||
1. Thoroughly rinse sprayer, tanks, boom, and hoses with clean water.
|
||
2. Partially fill the tank with water and add one of the cleaning agents listed in the SPRAYER
|
||
CLEANUP section of this label. Complete filling the tank and flush the cleaning solution through the
|
||
boom and hoses. Let stand for 15 minutes with agitation or recirculation and then drain the tank after
|
||
flushing the hoses, boom, and nozzles.
|
||
3. Thoroughly rinse sprayer, tanks, boom, and hoses with clean water.
|
||
4. Follow label directions of the product previously sprayed for rinsate disposal.
|
||
|
||
During an extended period where spraying or mixing equipment will be used to apply multiple loads of
|
||
Enlite, at the end of each day of spraying partially fill the tank with fresh water, flush the boom and hoses
|
||
and allow to sit overnight.
|
||
|
||
A steam cleaning of aerial spray tanks is advised to dislodge any visible pesticide deposits.
|
||
|
||
MIXING INSTRUCTIONS
|
||
|
||
Fill tank 1/4 full with water. Start agitation system, add Enlite and continue adding water. Add separately
|
||
each additional component of any tank mix while adding water. Continue agitation throughout.
|
||
|
||
If poor mixing occurs with any component, premix the component with two parts water before adding to
|
||
the spray tank.
|
||
|
||
A fertilizer solution may be used in the spray mixture. Small quantities need to be tested for compatibility
|
||
by the following procedures before full-scale mixing.
|
||
|
||
1. Put 1 pint of fertilizer solution in a quart jar.
|
||
2. Mix 2 teaspoons Enlite with 2 tablespoons of water; mix thoroughly and add to fertilizer solution.
|
||
3. Close jar and shake well.
|
||
4. If other herbicides are to be used in the mixture, premix 2 teaspoons of wettable powder or 1
|
||
teaspoon of liquid with 2 tablespoons of water; add to Enlite/fertilizer solution mixture.
|
||
5. Close jar and shake well.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 30
|
||
|
||
|
||
6. Watch mixture for several seconds; check again in 30 minutes.
|
||
7. If mixture does not separate, foam, gel, or become lumpy, it may be used.
|
||
8. Mixing ability may be improved by adding compatibility agents.
|
||
Provided the above procedure shows the mixture to be compatible, prepare the tank mixture as follows:
|
||
Add the fertilizer solution to the spray tank first, with the agitator running, add the required amount of
|
||
Enlite and thoroughly mix. For tank mixtures with other herbicides, follow directions above. For tank
|
||
mixtures with other herbicides, all applicable directions, restrictions and precautions for the additional
|
||
herbicides are also to be followed.
|
||
|
||
Use Enlite spray preparations the same day as mixed or product degradation may occur. Thoroughly
|
||
reagitate and remix before using, if allowed to settle. When tank mixing with other herbicides, all
|
||
applicable directions, restrictions and precautions for the additional herbicides are also to be followed.
|
||
|
||
SPRAYER CLEANUP
|
||
|
||
To avoid subsequent injury to desirable crops, thoroughly clean all mixing and spray equipment
|
||
immediately following applications of Enlite as follows:
|
||
|
||
Spray equipment, including mixing vessels and nurse tanks, must be cleaned each day following Enlite
|
||
application. After Enlite is applied, the following steps need to be used to clean the spray equipment:
|
||
|
||
1. Drain tank and thoroughly hose down the interior surfaces of the tank. Flush tank, boom, and
|
||
hoses with clean water for a minimum of 5 minutes.
|
||
2. Partially fill the tank with water and add one gallon of household ammonia* (containing 3% active)
|
||
for every 100 gallons of water. Complete filling the tank with water, then flush the cleaning
|
||
solution through the boom, hoses, and nozzles. Add more water to completely fill the tank and
|
||
allow to agitate or recirculate for at least 15 minutes. Again, flush the boom, hoses and nozzles,
|
||
and drain the tank.
|
||
3. Remove the nozzles, screens and the end caps of sprayer booms and clean separately in a
|
||
bucket containing water and the cleaning agent.
|
||
4. Repeat Step 2.
|
||
5. Thoroughly rinse the tank with clean water for a minimum of 5 minutes, flushing water through the
|
||
boom and hoses.
|
||
6. To enhance removal of flumioxazin from the spray system before spraying susceptible crops,
|
||
follow the above clean-out steps with ammonia, then add a tank cleaner such as “Valent Tank
|
||
Cleaner” from Valent U.S.A. Corporation, and allow the cleaning solution to remain in the
|
||
pressurized spray system (spray tank, hoses and boom) overnight before flushing the system for
|
||
a minimum of 15 minutes. If using "Valent Tank Cleaner" follow use instructions and personal
|
||
protective equipment (PPE) instructions as found on the "Valent Tank Cleaner" label.
|
||
|
||
*Equivalent amounts of an alternate strength ammonia solution or a tank cleaner advised in
|
||
separately published company bulletins may be used.
|
||
|
||
THE IMPORTANCE OF SOIL PH
|
||
|
||
Soil pH varies greatly, even within the same field. pH variations as much as 2 pH units are common.
|
||
Composite soil samples taken across an entire field, such as those samples taken for soil fertility
|
||
specifications, may not detect areas of high pH. Sub-sampling is advised for areas likely to have pH
|
||
values higher than the field average. The following is a non-inclusive list of potential high pH areas where
|
||
subsampling is advised.
|
||
|
||
• Where different soil types are evident within a field, sample soil types separately.
|
||
• Where conditions vary within a field, sample areas separately, including:
|
||
- areas bordered by limestone gravel roads,
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 31
|
||
|
||
|
||
- river bottoms subject to flooding,
|
||
- low areas in hardpan soils where evaporative ponds
|
||
may occur,
|
||
- eroded hillsides,
|
||
- along drain tile lines, and
|
||
- areas where drainage ditch spoil has been spread.
|
||
• Where lime has not been deeply incorporated, soil may exhibit significantly higher pH values in
|
||
the upper 3 inches of soil. Composite soil samples taken at a 6-8 inch depth may not reflect the
|
||
elevated pH near the surface. In these cases, shallow sampling, the upper 3 inches, is advised.
|
||
|
||
Determine soil pH by laboratory analysis using a 1:1 soil:water suspension.
|
||
|
||
STORAGE AND DISPOSAL
|
||
Pesticide Storage: Store product in original container only. DO NOT contaminate water, other
|
||
pesticides, fertilizer, food or feed in storage. Store in a cool, dry place.
|
||
|
||
Pesticide Disposal: DO NOT contaminate water, food, or feed by disposal. Waste resulting from
|
||
the use of this product must be disposed of on site or at an approved waste disposal facility.
|
||
|
||
CONTAINER HANDLING: Refer to the Net Contents section of this product’s labeling for
|
||
the applicable “Nonrefillable Container” or “Refillable Container” designation.
|
||
|
||
Nonrefillable Plastic and Metal Containers (Capacity Equal to or Less Than 50 Pounds):
|
||
Nonrefillable container. DO NOT reuse or refill this container. Triple rinse container (or equivalent)
|
||
promptly after emptying. Triple rinse as follows: Empty the remaining contents into application
|
||
equipment or a mix tank. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour
|
||
rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10
|
||
seconds after the flow begins to drip. Repeat this procedure two more times. Then, for Plastic
|
||
Containers, offer for recycling if available or puncture and dispose of in a sanitary landfill, or by
|
||
incineration. DO NOT burn, unless allowed by state and local ordinances. For Metal Containers,
|
||
offer for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary
|
||
landfill, or by other procedures approved by state and local authorities.
|
||
|
||
Nonrefillable Plastic and Metal Containers (Capacity Greater Than 50 Pounds): Nonrefillable
|
||
container. DO NOT reuse or refill this container. Triple rinse container (or equivalent) promptly after
|
||
emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix
|
||
tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and
|
||
roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on
|
||
its end and tip it back and forth several times. Turn the container over onto its other end and tip it back
|
||
and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for
|
||
later use or disposal. Repeat this procedure two more times. Then, for Plastic Containers, offer for
|
||
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn,
|
||
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
|
||
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
|
||
approved by state and local authorities.
|
||
|
||
Nonrefillable Plastic and Metal Containers, e.g., Intermediate Bulk Containers [IBC] (Size or
|
||
Shape Too Large to be Tipped, Rolled or Turned Upside Down): Nonrefillable container. DO NOT
|
||
reuse or refill this container. Clean container promptly after emptying the contents from this container
|
||
into application equipment or mix tank and before final disposal using the following pressure rinsing
|
||
procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and ensure that
|
||
the water spray thoroughly covers the top, bottom and all sides inside the container. The nozzle
|
||
manufacturer generally provides instructions for the appropriate spray pressure, spray duration and/or
|
||
spray volume. If the manufacturer’s instructions are not available, pressure rinse the container for at
|
||
least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of the
|
||
container volume. Drain, pour or pump rinsate into application equipment or rinsate collection system.
|
||
Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for recycling if
|
||
available or puncture and dispose of in a sanitary landfill, or by incineration. For Metal Containers, offer
|
||
for recycling if available or reconditioning if appropriate, or puncture and dispose of in a sanitary landfill,
|
||
or by other procedures approved by state and local authorities.
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 32
|
||
|
||
|
||
Nonrefillable Paper or Plastic Bags, Fiber Sacks including Flexible Intermediate Bulk
|
||
Containers (FIBC) or Fiber Drums With Liners: Nonrefillable container. DO NOT reuse or refill this
|
||
container. Completely empty paper or plastic bag, fiber sack or drum liner by shaking and tapping
|
||
sides and bottom to loosen clinging particles. Empty residue into application or manufacturing
|
||
equipment. Then offer for recycling if available or dispose of empty paper or plastic bag, fiber sack or
|
||
fiber drum and liner in a sanitary landfill, or by incineration. DO NOT burn, unless allowed by state
|
||
and local ordinances.
|
||
|
||
Refillable Fiber Drums With Liners: Refillable container (fiber drum only). Refilling Fiber Drum: Refill
|
||
this fiber drum with Enlite herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron
|
||
methyl. DO NOT reuse this fiber drum for any other purpose. Cleaning before refilling is the
|
||
responsibility of the refiller.
|
||
|
||
Completely empty liner by shaking and tapping sides and bottom to loosen clinging particles. Empty
|
||
residue into application or manufacturing equipment. Disposing of Fiber Drum and/or Liner: DO NOT
|
||
reuse this fiber drum for any other purpose other than refilling (see preceding). Cleaning the container
|
||
(liner and/or fiber drum) before final disposal is the responsibility of the person disposing of the
|
||
container. Offer the liner for recycling if available or dispose of liner in a sanitary landfill, or by
|
||
incineration. DO NOT burn, unless allowed by state and local ordinances. If drum is contaminated and
|
||
cannot be reused, dispose of it in the manner required for its liner. To clean the fiber drum before final
|
||
disposal, completely empty the fiber drum by shaking and tapping sides and bottom to loosen clinging
|
||
particles. Empty residue into application or manufacturing equipment. Then offer the fiber drum for
|
||
recycling if available or dispose of in a sanitary landfill, or by incineration. DO NOT burn, unless
|
||
allowed by state and local ordinances.
|
||
|
||
All Other Refillable Containers: Refillable container. Refilling Container: Refill this container with
|
||
Enlite herbicide containing chlorimuron ethyl, flumioxazin, and thifensulfuron methyl only. DO NOT
|
||
reuse this container for any other purpose. Cleaning before refilling is the responsibility of the refiller.
|
||
Prior to refilling, inspect carefully for damage such as cracks, punctures, abrasions, worn out threads
|
||
and closure devices. If damage is found, DO NOT use the container, contact Corteva Agriscience at
|
||
the number below for instructions. Check for leaks after refilling and before transporting. If leaks are
|
||
found, DO NOT reuse or transport container, contact Corteva Agriscience at the number below for
|
||
instructions. Disposing of Container: DO NOT reuse this container for any other purpose other than
|
||
refilling (see preceding). Cleaning the container before final disposal is the responsibility of the person
|
||
disposing of the container. To clean the container before final disposal, use the following pressure
|
||
rinsing procedure. Insert a lance fitted with a suitable tank cleaning nozzle into the container and
|
||
ensure that the water spray thoroughly covers the top, bottom and all sides inside the container. The
|
||
nozzle manufacturer generally provides instructions for the appropriate spray pressure, spray duration
|
||
and/or spray volume. If the manufacturer’s instructions are not available, pressure rinse the container
|
||
for at least 60 seconds using a minimum pressure of 30 PSI with a minimum rinse volume of 10% of
|
||
the container volume. Drain, pour or pump rinsate into application equipment or rinsate collection
|
||
system. Repeat this pressure rinsing procedure two more times. Then, for Plastic Containers, offer for
|
||
recycling if available or puncture and dispose of in a sanitary landfill, or by incineration. DO NOT burn,
|
||
unless allowed by state and local ordinances. For Metal Containers, offer for recycling if available or
|
||
reconditioning if appropriate, or puncture and dispose of in a sanitary landfill, or by other procedures
|
||
a
|
||
pproved by state and local authorities.
|
||
|
||
"Valent Tank Cleaner" is a trademark of Valent U.S.A. Corporation
|
||
|
||
|
||
Terms and Conditions of Use
|
||
If terms of the following Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies are not
|
||
acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the
|
||
extent consistent with applicable law, use by the buyer or any other user constitutes acceptance of the
|
||
terms under Warranty Disclaimer, Inherent Risks of Use and Limitations of Remedies.
|
||
|
||
Warranty Disclaimer
|
||
Corteva Agriscience warrants that this product conforms to the chemical description on the label and is
|
||
reasonably fit for the purposes stated on the label when used in strict accordance with the directions for
|
||
use, subject to the inherent risks set forth below. To the extent consistent with applicable law, Corteva
|
||
|
||
G7D / Enlite / MSTR / IRRD Amend / 05-07-2026 Page 33
|
||
|
||
|
||
Agriscience MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR
|
||
FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY.
|
||
|
||
Inherent Risks of Use
|
||
It is impossible to eliminate all risks associated with use of this product. Plant injury, lack of performance,
|
||
or other unintended consequences may result because of such factors as use of the product contrary to
|
||
label instructions (including conditions noted on the label, such as unfavorable temperatures, soil
|
||
conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes),
|
||
presence of other materials, the manner of application or other factors, all of which are beyond the control
|
||
of Corteva Agriscience or the seller. Corteva Agriscience will not be responsible for losses or damages
|
||
resulting from the use of this product in any manner not specifically directed by Corteva Agriscience. To
|
||
the extent consistent with applicable law, all such risks associated with non-directed use shall be
|
||
assumed by buyer and/or user.
|
||
|
||
Limitation of Remedies
|
||
To the extent consistent with applicable law, the exclusive remedy for losses or damages resulting from
|
||
this product (including claims based on contract, negligence, tort, strict liability, or other legal theories),
|
||
shall be limited to, at Corteva Agriscience’s election, one of the following:
|
||
|
||
1. Refund of purchase price paid by buyer or user for product bought, or
|
||
2. Replacement of product used.
|
||
|
||
To the extent consistent with applicable law, Corteva Agriscience shall not be liable for losses or
|
||
damages resulting from handling or use of this product unless Corteva Agriscience is promptly notified of
|
||
such loss or damage in writing. To the extent consistent with applicable law, in no case shall Corteva
|
||
Agriscience be liable for consequential, incidental or special damages or losses.
|
||
|
||
The terms of the Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies cannot be
|
||
varied by any written or verbal statements or agreements. No employee or sales agent of Corteva
|
||
Agriscience or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this
|
||
Limitation of Remedies in any manner.
|
||
|
||
For product information call: 1-800-258-3033
|
||
|
||
Produced for
|
||
Corteva Agriscience LLC
|
||
9330 Zionsville Road
|
||
Indianapolis, IN 46268
|
||
|
||
™
|
||
®Trademarks of Corteva Agriscience and its affiliated companies
|
||
|
||
EPA accepted __/__/__
|