CLARITY HERBICIDE

EPA Reg No: 7969-137
Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
Signal word: Caution
Active ingredients: Dicamba, diglycolamine salt (58.1%)
Label accepted: 2026-07-30
Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00137-20260730.pdf

July 30, 2026 SENT BY EMAIL Matthew Feinberg [email protected] BASF AGRICULTURAL SOLUTIONS US LLC Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - Minor Label Revisions Product Name: CLARITY HERBICIDE Admin Number: 7969-137 EPA Receipt Date: 05/14/2026 Action Case Number: 00698669 Dear Matthew Feinberg: The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10. The labeling submitted with this application has been stamped "Notification" and will be placed in our records. Should you wish to add/retain a reference to your company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists examples of statements the EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the EPA find or if it is brought to our attention that a website contains statements or claims substantially differing from statements or claims made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance. If you have questions, please contact Jamie Millard via email at [email protected]. Sincerely, Kable Bo Davis, Senior Advisor HB, RD Office of Pesticide Programs Kable Bo Davis

For weed control in asparagus, Conservation Reserve Programs, CRP land, corn, cotton, fallow croplands, general farmstead (noncropland), sorghum, grass grown for seed, hay, proso millet, pasture, rangeland, small grains, sod farms and farmstead turfgrass, soybean, and sugarcane Active Ingredient: Diglycolamine salt of 3,6-dichloro-o-anisic acid* ......................... 58.1% Other Ingredients:............................................... 41.9% Total.......................................................... 100.0% *Contains 39.4% 3,6-dichloro-o-anisic acid (4 pounds acid equivalent per gallon or 480 grams per liter). EPA Reg. No. 7969-137 EPA Est. No. KEEP OUT OF REACH OF CHILDREN CAUTION/PRECAUCIÓN Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, ﬁnd someone to explain it to you in detail.) See inside booklet for complete First Aid, Precautionary Statements, Directions For Use, Conditions of Sale and Warranty, and state-speciﬁc crop and/or use site restrictions. In case of an emergency endangering life or property involving this product, call day or night 1-800-832-HELP (4357). Net Contents: BASF Agricultural Solutions US LLC 2 TW Alexander Drive Research Triangle Park, NC 27713 Dicamba Group 4 Herbicide 7969-137 07/30/2026

2 Precautionary Statements HAZARDS TO HUMANS AND DOMESTIC ANIMALS CAUTION Causes moderate eye irritation. Harmful if swallowed or absorbed through skin. Avoid contact with skin, eyes or clothing. Personal Protective Equipment (PPE) Some materials that are chemical-resistant to this product are nitrile rubber and butyl rubber. If you want more options, follow the instructions for Category C on an EPA chemical-resistance category selection chart. All mixers, loaders, and applicators and other han- dlers must wear: • Long-sleeved shirt and long pants • Chemical-resistant gloves (except for pilots) • Shoes plus socks See Engineering Controls Statement for additional requirements. Follow the manufacturer’s instructions for cleaning and maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Engineering Controls Statement When handlers use closed systems, enclosed cabs, or air- craft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesti- cides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modiﬁed as speciﬁed in the WPS. Pilots must use cockpits in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6). User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing. Environmental Hazards DO NOT apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. DO NOT contaminate water when disposing of equipment washwaters or rinsate. Apply this product only as directed on the label. This chemical is known to leach through soil into ground water under certain conditions as a result of agricultural use. Use of this chemical in areas where soils are perme- able, particularly where the water table is shallow, may result in ground water contamination. Ground and Surface Water Protection Point source contamination: To prevent point source contamination, DO NOT mix, load this pesticide product within 50 feet of wells (including abandoned wells and drainage wells), sink holes, perennial or intermittent streams and rivers, and natural or impounded lakes and reservoirs. DO NOT apply pesticide product within 50 feet of wells. This setback does not apply to properly capped or plugged abandoned wells and does not apply to imper- vious pad or properly diked mixing/loading areas as described below. Mixing, loading, rinsing, or washing operations performed within 50 feet of a well are allowed only when conducted on an impervious pad constructed to withstand the weight of the heaviest load that may be on or move across the pad. The pad must be self-contained to prevent surface FIRST AID If swallowed • Call a poison control center or doctor immediately for treatment advice. • Have person sip a glass of water if able to swallow. • DO NOT induce vomiting unless told to do so by a poison control center or doctor. • DO NOT give anything to an unconscious person. If on skin or clothing • Take off contaminated clothing. • Rinse skin immediately with plenty of water for 15 to 20 minutes. • Call a poison control center or doctor for treatment advice. If in eyes • Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. • Remove contact lenses, if present, after ﬁrst 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact BASF Agricultural Solutions US LLC (hereafter “BASF”) for emergency medical treatment infor- mation: 1-800-832-HELP (4357).

3 water ﬂow over or from the pad. The pad capacity must be maintained at 110% that of the largest pesticide container or application equipment used on the pad and have sufﬁ- cient capacity to contain all product spills, equipment or container leaks, equipment wash waters, and rainwater that may fall on the pad. The containment capacity does not apply to vehicles delivering pesticide shipments to the mixing/loading site. States may have in effect additional requirements regarding wellhead setbacks and operational containment. Care must be taken when using this product to prevent: a) back siphoning into wells, b) spills or c) improper dispos- al of excess pesticide, spray mixtures or rinsates. Check valves or antisiphoning devices must be used on all mixing equipment. Movement by surface runoff or through soil: DO NOT apply under conditions which favor runoff. DO NOT apply to impervious substrates such as paved or highly compacted surfaces in areas with high potential for ground water contamination. Ground water contamination may occur in areas where soils are permeable or coarse and ground water is near the surface. DO NOT apply to soils classiﬁed as sand with less than 3% organic matter and where ground water depth is shallow. To minimize the possibility of ground water contamination, carefully follow application rate recommendations as affected by soil type in the general information section of this label. Movement by water erosion of treated soil: DO NOT apply or incorporate this product through any type of irri- gation equipment nor by ﬂood or furrow irrigation. Ensure treated areas have received at least one-half inch rainfall (or irrigation) before using tailwater for subsequent irriga- tion of other ﬁelds. Endangered Species Concerns The use of any pesticide in a manner that may kill or other- wise harm an endangered species or adversely modify their habitat is a violation of federal law. Directions For Use It is a violation of federal law to use this product in a man- ner inconsistent with its labeling. DO NOT apply this product in a way that will contact workers or other per- sons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements speciﬁc to your state or tribe, consult the agency responsible for pesticide regulation. Unless otherwise directed in supplemental labeling, all applicable directions, restrictions, precautions and Conditions of Sale and Warranty are to be followed. This labeling must be in the user’s possession during application. Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notiﬁcation, and emergency assistance. It also contains speciﬁc instructions and exceptions pertaining to the statements on this label about Personal Protective Equipment (PPE), and restricted-entry intervals. The requirements in this box only apply to uses of this prod- uct that are covered by the WPS. DO NOT enter or allow worker entry into treated areas during the restricted-entry interval (REI) of 24 hours. PPE required for early entry to treated areas that is per- mitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as, plants, soil, or water is: • Coveralls worn over short-sleeved shirt and short pants • Chemical-resistant footwear plus socks • Chemical-resistant gloves made of any waterproof material • Chemical-resistant headgear for overhead exposure • Protective eyewear Non-agricultural Use Requirements The requirements in this box apply to uses of this prod- uct that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, nurseries, or greenhouses. DO NOT enter or allow people (or pets) to enter the treated area until sprays have dried. DO NOT apply this product in a way that will contact workers or other per- sons, either directly or through drift. Only protected handlers may be in the area during application. Storage and Disposal DO NOT contaminate water, food, or feed by storage or disposal. Open dumping is prohibited. This product must not be mixed, loaded, or used within 50 feet of all wells including abandoned wells, drainage wells, and sinkholes. Pesticide Storage: Groundwater contamination may be reduced by diking and ﬂooring of permanent liquid bulk storage sites with an impermeable material. Store in original container in a well-ventilated area separately from fertilizer, feed, and foodstuffs. Avoid cross- contamination with other pesticides. (continued) must

4 Storage and Disposal (continued) Pesticide Disposal: Wastes resulting from this product must be disposed of on site or at an approved waste disposal facility. Pesticide, spray mixture, or rinsate that cannot be used according to label instructions must be disposed of according to federal, state or local procedures under Subtitle C of the Resource Conservation and Recovery Act. Improper disposal of excess pesticide, spray mix, or rinsate is a violation of federal law. Container Handling: Nonreﬁllable Container. DO NOT reuse or reﬁll this container. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recy- cling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landﬁll, or by incin- eration, or by other procedures approved by state and local authorities. Triple rinse containers small enough to shake (capacity ≤ 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the ﬂow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into appli- cation equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the ﬂow begins to drip. Repeat this procedure two more times. Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revo- lution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Empty the rin- sate into application equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the con- tainer and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the ﬂow begins to drip. Reﬁllable Container. Reﬁll this container with pesticide only. DO NOT reuse this container for any other pur- pose. Triple rinsing the container before ﬁnal disposal is the responsibility of the person disposing of the contain- er. Cleaning before reﬁlling is the responsibility of the reﬁller. (continued) Storage and Disposal (continued) Triple rinse as follows: To clean the container before ﬁnal disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10% full with water. Agi- tate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. When this container is empty, replace the cap and seal all openings that have been opened during use; return the container to the point of purchase or to a designated location. This container must only be reﬁlled with a pesti- cide product. DO NOT reuse the container for any other purpose. Prior to reﬁlling, inspect carefully for damage such as cracks, punctures, abrasions, worn-out threads and closure devices. Check for leaks after reﬁlling and before transport. DO NOT transport if this container is damaged or leaking. If the container is damaged, or leaking, or obsolete and not returned to the point of pur- chase or to a designated location, triple rinse emptied container and offer for recycling, if available, or dispose of container in compliance with state and local regulations. In Case of Spill In case of large-scale spillage regarding this product, call: CHEMTREC 1-800-424-9300 BASF 1-800-832-HELP (4357) Steps to be taken in case material is released or spilled: Dike and contain the spill with inert material (sand, earth, etc.) and transfer liquid and solid diking material to sepa- rate containers for disposal. Remove contaminated clothing, and wash affected skin areas with soap and water. Wash clothing before reuse. Keep the spill out of all sewers and open bodies of water. I. Product Information Clarity ® herbicide is a water-soluble formulation intended for control and suppression of many annual, biennial, and perennial broadleaf weeds, as well as woody brush and vines listed in Table 1. General Weed List, Including ALS- and Triazine-Resistant Biotypes . Clarity may be used for control of these weeds in asparagus, corn, cot- ton, conservation reserve programs, fallow cropland, grass grown for seed, hay, proso millet, pasture, rangeland, gen- eral farmstead (noncropland), small grains, sod farms and farmstead turf, sorghum, soybean, and sugarcane. Mode of Action Clarity is readily absorbed by plants through shoot and root uptake, translocates throughout the plant’s system, and accumulates in areas of active growth. Clarity inter- feres with the plant’s growth hormones (auxins) resulting in death of many broadleaf weeds. must

5 Table 1. General Weed List, Including ALS- and Triazine-Resistant Biotypes ANNUALS Alkanet Amaranth, Palmer, Powell, Spiny Aster, Slender Bedstraw, Catchweed Beggarweed, Florida Broomweed, Common Buckwheat, Tartary, Wild Buffalobur Burclover, California Burcucumber Buttercup, Corn, Roughseed Carpetweed Catchﬂy, Nightﬂowering Chamomile, Corn Chervil, Bur Chickweed, Common Clovers Cockle, Corn, Cow, White Cocklebur, Common Copperleaf, Hophornbeam Cornﬂower (Bachelor Button) Croton, Tropic, Woolly Daisy, English Dragonhead, American Eveningprimrose, Cutleaf Falseﬂax, Smallseed Fleabane, Annual Flixweed Fumitory Goosefoot, Nettleleaf Hempnettle Henbit Jacobs-Ladder Jimsonweed Knawel (German Moss) Knotweed, Prostrate Kochia Ladysthumb Lambsquarters, Common Lettuce, Miners, Prickly Mallow, Common, Venice Marestail (Horseweed) Mayweed Morningglory, Ivyleaf, Tall Mustard, Black, Blue, Tansy, Treacle, Tumble, Wild, Yellowtops Nightshade, Black, Cutleaf, Pennycress, Field (Fanweed, Frenchweed, Stinkweed) Pepperweed, Virginia (Peppergrass) Pigweed, Prostrate, Redroot (Carelessweed), Rough, Smooth, Tumble Pineappleweed Poorjoe Poppy, Red-horned Puncturevine Purslane, Common Pusley, Florida Radish, Wild Ragweed, Common, Giant (Buffaloweed), Lance-Leaf Rocket, London, Yellow Rubberweed, Bitter (Bitterweed) Salsify Senna, Coffee, Sesbania, Hemp Shepherdspurse Sicklepod Sida, Prickly (Teaweed) Smartweed, Green, Pennsylvania Sneezeweed, Bitter Sowthistle, Annual, Spiny Spanish Needles Spikeweed, Common Spurge, Prostrate, Leafy Spurry, Corn Starbur, Bristly Starwort, Little Sumpweed, Rough Sunﬂower, Common (Wild), Volunteer Thistle, Russian Velvetleaf Waterhemp Waterprimrose, Winged Wormwood BIENNIALS Burdock, Common Carrot, Wild (Queen Anne’s Lace) Cockle, White Eveningprimrose, Common Geranium, Carolina Gromwell Knapweed, Diffuse, Spotted Mallow, Dwarf Plantain, Bracted Ragwort, Tansy Starthistle, Yellow Sweetclover Teasel Thistle, Bull, Milk, Musk, Plumeless PERENNIALS Alfalfa1 Artichoke, Jerusalem Aster, Spiny, Whiteheath Bedstraw, Smooth Bindweed, Field, Hedge Blueweed, Texas Bursage, Woollyleaf 1 (Bur Ragweed, Povertyweed) Buttercup, Creeping, Tall, Western Field Campion, Bladder Chickweed, Field, Mouseear Chicory 1 Clover1, Hop Dandelion1, Dock1, Broadleaf (Bitterdock), Curly Dogbane, Hemp Dogfennel 1 (Cypressweed) Fern, Bracken Garlic, Wild Goldenrod, Canada, Missouri Goldenweed, Common Hawkweed Henbane, Black 1 Horsenettle, Carolina Ironweed Knapweed, Black, Diffuse, Russian 1, Spotted Milkweed, Common, Honeyvine, Western Whorled Nettle, Stinging Nightshade, Silverleaf (White Horsenettle) Onion, Wild Plantain, Broadleaf, Buckhorn Pokeweed Ragweed, Western Redvine Sericea Lespedeza Smartweed, Swamp Snakeweed, Broom Sorrel 1, Red (Sheep Sorrel) Sowthistle1, Perennial Spurge, Leafy Sundrop, Thistle, Canada, Scotch Toadﬂax, Dalmatian Tropical Soda Apple Trumpetcreeper (Buckvine) Vetch Waterhemlock, Spotted Waterprimrose, Creeping Woodsorrel 1, Creeping, Yellow Wormwood, Louisiana Yankeeweed Yarrow, Common 1 WOODY SPECIES Alder Ash Aspen Basswood Beech Birch Blackberry 2 Blackgum2 Cedar2 Cherry Chinquapin Cottonwood Creosotebush 2 Cucumbertree Dewberry 2 Dogwood2 Elm Grape Hawthorn (Thornapple) 2 Hemlock Hickory Honeylocust Honeysuckle Hornbeam Huckleberry Huisache Ivy, Poison Kudzu Locust, Black Maple Mesquite Oak Oak, Poison Olive, Russian Persimmon, Eastern Pine Plum, Sand (Wild Plum) 2 Poplar Rabbitbrush Redcedar, Eastern 2 Rose2, McCartney, Multiﬂora Sagebrush, Fringed2 Sassafras Serviceberry Spicebush Spruce Sumac Sweetgum 2 Sycamore Tarbush Willow Witchhazel Yaupon 2 Yucca2 1 Noted perennials may be controlled using lower rates of Clarity ® herbicide than those recommended for other listed perennial weeds. 2 Growth suppression only.

6 Resistance Management Clarity ® herbicide has a low probability of selecting for resistant weed biotypes. Cleaning Spray Equipment Clean application equipment thoroughly by using a strong detergent or commercial sprayer cleaner, according to the manufacturer’s directions, and then triple rinsing the equip- ment before and after applying this product. II. Application Instructions Clarity can be applied to actively growing weeds as aerial, broadcast, band, or spot spray applications using water or sprayable fertilizer as a carrier. For general Clarity applica- tion rates for control or suppression by weed type and growth stage see Table 2. Clarity Application Rates for Control or Suppression by Weed Type and Growth Stage. For crop-speciﬁc application timing and other details, refer to section VI. Crop-Speciﬁc Information. To avoid uneven spray coverage, Clarity should not be applied during periods of gusty wind or when wind is in excess of 15 mph. Avoid off-target movement. Use extreme care when apply- ing Clarity to prevent injury to desirable plants and shrubs. Cultivation DO NOT cultivate within 7 days after applying Clarity. Sensitive Crop Precautions Clarity may cause injury to desirable trees and plants, particularly beans, cotton, ﬂowers, fruit trees, grapes, ornamentals, peas, potatoes, soybeans, sunﬂowers, tobacco, tomatoes, and other broadleaf plants when con- tacting their roots, stems, or foliage. These plants are most sensitive to Clarity during their development or growing stage. Precautions to avoid herbicide drift • Use coarse sprays (volume median diameter of 400 microns or more) to avoid potential herbicide drift. Select nozzles that are designed to produce minimal amounts of ﬁne spray particles (less than 200 microns). Examples of nozzles designed to produce coarse sprays via ground applications are Delavan ® Raindrops, Spraying Systems XR (excluding 110º tips) ﬂat fans, Turbo Teejets®, Turbo Floodjets®, or large capacity ﬂood nozzles such as D10, TK10, or greater capacity tips. • Keep the spray pressure at or below 20 psi and the spray volume at or above 20 gallons per acre (for ground broadcast applications), unless otherwise required by the manufacturer of drift-reducing nozzles. Consult your spray nozzle supplier concerning the choice of drift- reducing nozzles. • Agriculturally approved drift-reducing additives may be used. Aerial Application Methods and Equipment Water Volume: Use 1 to 10 gallons of water per acre (2 to 20 gallons of diluted spray per treated acre for pre- harvest uses). Use the higher spray volume when treating dense or tall vegetation. Application Equipment: Select nozzles designed to pro- duce minimal amounts of ﬁne spray particles. Make aerial applications at the lowest safe height to reduce exposing the spray to evaporation and wind. The applicator must follow the most restrictive use cau- tions to avoid drift hazards, including those found in this labeling, as well as state and local regulations and ordinances. DO NOT use aerial equipment if spray particles can be carried by the wind into areas where sensitive crops or plants are growing or when temperature inversions exist. Ground Application (Banding) When applying Clarity by banding, determine the amount of herbicide and water volume needed using the following formula: Bandwidth in inches x Broadcast rate per acre = Banding herbicide rate per acreRow width in inches Bandwidth in inches x Broadcast volume per acre = Banding water volume per acreRow width in inches Table 2. Clarity Application Rates for Control or Suppression by Weed Type and Growth Stage Use rate limitations are given in sections V. and VI. Crop-Speciﬁc Information . Weed Type and Stage Rate Per Acre (ﬂ oz) Weed Type and Stage Rate Per Acre (ﬂ oz) Annual1 Small, actively growing Established weed growth

8 to 16 16 to 24 Perennial Top growth suppression Top growth control and root suppression Noted perennials (footnote 1 in Table 1) Other perennials 3

8 to 16 16 to 32 32 32 Biennial Rosette diameter 1 to 3" Rosette diameter 3" or more Bolting

8 to 16 16 to 32 32 Woody Brush & Vines Top growth suppression Top growth control 2,3 Stems and stem suppression 3

16 to 32 32 32 1 Rates below 8 fluid ounces per acre may provide control or suppression but should typically be applied with other herbicides th at are effective on the same species and biotype. 2 Species noted in Table 2 will require tank mixes for adequate control. 3 DO NOT broadcast apply more than 32 fluid ounces per acre for single application. Use the higher level of listed rate ranges when tre ating dense vegetative growth or perennial weeds with well established root growth. “Other perennials” are defined as those listed in Table 1. General Weed List, Including ALS- and Triazine-Resistant Biotypes without footnote 1. The use on other perennials and on Woody Brush and Vine stems and for stem suppression is not registered in California. Rates higher than 32 fluid ounces per acre are for spot treatment only. DO NOT exceed 64 fluid ounces per acre per year.

7 Ground Application (Broadcast) Water Volume: Use 3 to 50 gallons of spray solution per broadcast acre for optimal performance. Use the higher spray volume when treating dense or tall vegetation. Application Equipment: Select nozzles designed to pro- duce minimal amounts of ﬁne spray particles. Spray with nozzles as close to the weeds as is practical for good weed coverage. Ground Application (Wipers) Clarity ® herbicide may be applied through wiper applica- tion equipment to control or suppress actively growing broadleaf weeds, brush, and vines. Use a solution contain- ing 1 part Clarity to 1 part water. DO NOT apply greater than 1 lb dicamba acid equivalent (1 quart Clarity herbi- cide) per acre per application. DO NOT contact desirable vegetation with herbicide solution. Wiper application may be made to crops (including pastures) and non-cropland areas described in this label with the exception of cotton, sorghum, and soybean. III. Additives To improve postemergence weed control, agriculturally approved surfactants, sprayable fertilizers (urea ammonium nitrate, or ammonium sulfate), or crop oil con- centrate may be added, particularly in dry growing conditions. (Refer to Table 3. Additive Rate Per Acre .) Nitrogen Source • Urea ammonium nitrate (UAN): Use 2 to 4 quarts of UAN (commonly referred to as 28%, 30%, or 32% nitrogen solution) per acre. DO NOT use brass or aluminum nozzles when spraying UAN. • Ammonium sulfate (AMS): AMS at 2.5 pounds per acre may be substituted for UAN. Use high-quality AMS (spray grade) to avoid plugging of nozzles. Other sources of nitrogen are not as effective as those mentioned. BASF does not recommend applying AMS, if applied in less than 10 gallons per acre because of potential prob- lems with precipitation in reduced volumes. Use AMS only if it has been demonstrated to be successful in local experience. Nonionic Surfactant The standard label recommendation is 1 pint of an 80% active nonionic spray surfactant per 100 gallons of water. For certain weeds, a higher spray surfactant rate is recommended. Oil Concentrate A crop oil concentrate must contain either a petroleum or vegetable oil base and must meet all of the following criteria: • be nonphytotoxic, • contain only EPA-exempt ingredients, • provide good mixing quality in the jar test, and • be successful in local experience. The exact composition of suitable products will vary; how- ever, vegetable and petroleum oil concentrates should contain emulsiﬁers to provide good mixing quality. Highly reﬁned vegetable oils have proven more satisfactory than unreﬁned vegetable oils. For additional information, see Compatibility Test for Mix Components . Adjuvants containing crop oil concentrates may be used in preplant, preemergence, and preharvest application, as well as in pastures and noncropland. DO NOT use crop oil concentrate for postemergence in-crop applications unless speciﬁcally allowed in section VI. Crop-Speciﬁc Information of this label. Table 3. Additive Rate Per Acre Additive Rate Per Acre Nonionic Surfactant 1 to 2 pints per 100 gallons AMS UAN Solution Crop Oil Concentrate 2.5 pounds 2 to 4 quarts 1 quart* *See manufacturer’s label for speciﬁc rate recommendations Compatibility Test for Mix Components Before mixing components, always perform a compatibility jar test. For 20 gallons per acre spray volume, use 3.3 cups (800 ml) of water. For other spray volumes, adjust accord- ingly. Only use water from the intended source at the source temperature. Add components in the sequence indicated in the Mixing Order using 2 teaspoons for each pound or 1 teaspoon for each pint of recommended label rate per acre. Always cap the jar and invert 10 cycles between compo- nent additions. When the components have all been added to the jar, let the solution stand for 15 minutes. Evaluate the solution for uniformity and stability. The spray solution should not have free oil on the surface, nor ﬁne particles that precipitate to the bottom, nor thick (clabbered) texture. If the spray solu- tion is not compatible, repeat the compatibility test with the addition of a suitable compatibility agent. If the solution is then compatible, use the compatibility agent as directed on its label. If the solution is still incompatible, DO NOT mix the ingredients in the same tank. Mixing Order

Water. Begin by agitating a thoroughly clean sprayer tank three-quarters full of clean water.
Agitation. Maintain constant agitation throughout mix- ing and application.
Inductor. If an inductor is used, rinse it thoroughly after each component has been added.
Products in PVA bags. Place any product contained in water-soluble PVA bags into the mixing tank. Wait until all water-soluble PVA bags have fully dissolved and the product is evenly mixed in the spray tank before continuing.
Water-dispersible products (dry ﬂowables, wettable powders, suspension concentrates, or suspo-emulsions).
Water-soluble products. (such as Clarity)

8 7) Emulsiﬁable concentrates (such as oil concentrate when applicable). 8) Water-soluble additives (such as AMS or UAN when applicable). 9) Remaining quantity of water. Maintain constant agitation during application. IV. Tank Mixing Information It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions, limitations, and directions for use on all product labels involved in the tank mixture. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Tank Mix Partners/Components The herbicide products listed may be applied with Clarity ® herbicide according to the speciﬁc tank mixing instruc- tions in this label and respective product labels. See section VI. Crop-Speciﬁc Information for more details. Read and follow the applicable Restrictions and Limitations and Directions For Use on all products involved in tank mixing. The most restrictive labeling applies to tank mixes. Clarity may also be used in tank mixtures with foliar applied insecticides including synthetic pyrethroids such as Ambush ®, Asana®, Pounce® and Warrior® insecticides. DO NOT apply Clarity in tank mixtures with Lorsban® insecticide. Physical incompatibility, reduced weed control, or crop injury may result from mixing Clarity with other pesticides (fungicides, herbicides, insecticides, or miticides), addi- tives, or fertilizers. BASF does not recommend using tank mixes other than those listed on BASF labeling. Local agri- cultural authorities may be a source of information when using other than BASF recommended tank mixes. • Accent ® (nicosulfuron; EPA Reg. No. 352-747) • Ally® (metsulfuron-methyl; EPA Reg. No. 279-9575) • Asulox® (asulam; EPA Reg. No. 70506-139) • Atrazine • Axiom ® (ﬂufenacet + metribuzin; EPA Reg. No. 264-766) • Banvel ® SGF (dicamba; EPA Reg. No. 51036-290) • Basagran® (bentazon; EPA Reg. No. 7696-45) • Beacon® (primisulfuron-methyl; EPA Reg. No. 10163-376) • Bicep II Magnum ® (s-metolachlor + atrazine; EPA Reg. No. 100-817) • Bronate ® (bromoxynil + MCPA; EPA Reg. No. 264-438) • Buctril ® (bromoxynil; EPA Reg. No. 264-437) • Caparol® (prometryn; EPA Reg. No. 100-620) • Crossbow® (2,4-D + triclopyr; EPA Reg. No. 62719-260) • Curtail ® (clopyralid + 2,4-D; EPA Reg. No. 62719-48) • Degree Xtra® (acetochlor + atrazine; EPA Reg. No. 524-511) • Dual Magnum ® (s-metolachlor; EPA Reg. No. 100-816) • Dual II Magnum ® (s-metolachlor + atrazine; EPA Reg. No. 100-818) • Eradicane ® (EPTC; EPA reg. No. 10163-284) • Evik® (ametryn; EPA Reg. No. 100-786) • Express® (thifensulfuron + tribenuron-methyl; EPA Reg. No. 279-9578) • Fallow Master ® (glyphosate + dicamba; EPA Reg. No. 105211-83) • Finesse ® (chlorsulfuron + metsulfuron-methyl; EPA Reg. No. 279-9510) • FulTime ® (acetochlor + atrazine; EPA Reg. No. 62719-371) • Garlon ® (triclopyr; EPA Reg. No. 62719-37) • Glean® (chlorsulfuron; EPA Reg. No. 279-9600) • Glyphosate • Harmony ® Extra (thifensulfuron + tribenuron-methyl; EPA Reg. No. 279-9583) • Harness ® Xtra (acetochlor + atrazine; EPA Reg. No. 524-480) • Hornet ® (ﬂumetsalam + clopyralid; EPA Reg. No. 62719-253) • Kerb ® (pronamide; EPA Reg. No. 62719-578) • Landmaster® BW (glyphosate + 2,4-D; EPA Reg. No. 105211-68) • Liberty ® (glufosinate; EPA Reg. No. 7969-447) • Liberty ® ULTRA (glufosinate-p; EPA Reg. No. 7969-500) • MCPA • Outlook ® (dimethenamid-P; EPA Reg. No. 7969-156) • Paramount® (quinclorac; EPA Reg. No. 7969-316) • Peak® (prosulfuron; EPA Reg. No. 10163-380) • Permit® (halosulfuron; EPA Reg. No. 81880-2) • Princep® (simazine; EPA Reg. No. 100-526) • Prowl® (pendimethalin; EPA Reg. No. 241-337) • Prowl® H2O (pendimethalin; EPA Reg. No. 241-418) • Python® (ﬂumetsulam; EPA Reg. No. 5481-677) • Spirit® (primisulfuron + prosulfuron; EPA Reg. No. 10163-381) • Stinger ® (clopyralid; EPA Reg. No. 62719-63) • Surpass® (acetochlor; EPA Reg. No. 62719-637) • Surtain ® (pyroxasulfone + saﬂufenicail; EPA Reg. No. 7969-501) • TopNotch ® (acetochlor; EPA Reg. No. 62719-369) • Tordon® 22K (picloram; EPA Reg. No. 62719-6) • Tough® (pyridate; EPA Reg. No. 91746-5) • Zidua® SC (pyroxasulfone; EPA Reg. No. 7969-374) • 2,4-D It is the pesticide user’s responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions, limitations, and directions for use on all product labels involved in the tank mixture. Users must follow the most restrictive directions for use and precautionary statements of each product in the tan k mixture. • Accent® (nicosulfuron; • Glean® (chlorsulfuron; EPA Reg. No. 352-747) EPA Reg. No. 279-9600) • Ally® (metsulfuron-methyl; • Glyphosate EPA Reg. No. 279-9575) • Harmony® Extra • Asulox® (asulam; (thifensulfuron + EPA Reg. No. 70506-139) tribenuron-methyl; • Atrazine EPA Reg. No. 279-9583) • Axiom® (ﬂufenacet + • Harness® Xtra metribuzin; (acetochlor + atrazine; EPA Reg. No. 264-766) EPA Reg. No. 524-480) • Banvel SGF® (dicamba; • Hornet® EPA Reg. No. 51036-290) (ﬂumetsalam + clopyralid; • Basagran® (bentazon; EPA Reg. No. 62719-253) EPA Reg. No. 7696-45) • Kerb® (pronamide; • Beacon® EPA Reg. No. 62719-578) (primisulfuron-methyl; • Landmaster® BW EPA Reg. No. 10163-376) (glyphosate + 2,4-D; • Bicep II Magnum® EPA Reg. No. 105211-68) (s-metolachlor + atrazine; • Liberty® (glufosinate; EPA Reg. No. 100-817) EPA Reg. No. 7969-447) • Bronate® • Liberty ULTRA® (bromoxynil + MCPA; (glufosinate-p; EPA Reg. No. 264-438) EPA Reg. No. 7969-500) • Buctril® (bromoxynil; • MCPA EPA Reg. No. 264-437) • Outlookk® (dimethenamid-P; • Caparol® (prometryn; EPA Reg. No. 7969-156) EPA Reg. No. 100-620) • Paramount® (quinclorac; • Crossbow® EPA Reg. No. 7969-316) (2,4-D + triclopyr; • Peak® (prosulfuron; EPA Reg. No. 62719-260) EPA Reg. No. 10163-380) • Curtail® (clopyralid + 2,4-D; • Permit® (halosulfuron; EPA Reg. No. 62719-48) EPA Reg. No. 81880-2) • Degree Xtra® • Princep® (simazine; (acetochlor + atrazine; EPA Reg. No. 100-526) EPA Reg. No. 524-511) • Prowl® (pendimethalin; • Dual Magnum® EPA Reg. No. 241-337) (s-metolachlor; • Prowl H2O ®® (pendimethalin; EPA Reg. No. 100-816) EPA Reg. No. 241-418) • Dual II Magnum® • Python® (ﬂumetsulam; (s-metolachlor + atrazine; EPA Reg. No. 5481-677) EPA Reg. No. 100-818) • Spirit® (primisulfuron + • Eradicane® (EPTC; prosulfuron; EPA reg. No. 10163-284) EPA Reg. No. 10163-381) • Evik® (ametryn; • Stinger® (clopyralid; EPA Reg. No. 100-786) EPA Reg. No. 62719-63) • Express® (thifensulfuron + • Surpass® (acetochlor; tribenuron-methyl; EPA Reg. No. 62719-637) EPA Reg. No. 279-9578) • Surtain® (pyroxasulfone + • Fallow Master® saﬂufenicail; (glyphosate + dicamba; EPA Reg. No. 7969-501) EPA Reg. No. 105211-83) • TopNotch® (acetochlor; • Finesse® (chlorsulfuron + EPA Reg. No. 62719-369) metsulfuron-methyl; • Tordon® 22K (picloram; EPA Reg. No. 279-9510) EPA Reg. No. 62719-6) • FulTime® • Tough® (pyridate; (acetochlor + atrazine; EPA Reg. No. 91746-5) EPA Reg. No. 62719-371) • Zidua SC® (pyroxasulfone; • Garlon® (triclopyr; EPA Reg. No. 7969-374) EPA Reg. No. 62719-37) • 2,4-D

9 V. Restrictions and Limitations • Maximum seasonal use rate: Refer to Table 4. Crop-Speciﬁc Restrictions and Limitations for crop-speciﬁc maximum seasonal use rates. DO NOT exceed 64 ﬂuid ounces of Clarity ® herbicide (2 pounds acid equivalent) per acre, per year. • Preharvest Interval (PHI): Refer to section VI. Crop-Speciﬁc Information for preharvest intervals. • Restricted-Entry Interval (REI): 24 hours • Crop Rotational Restrictions: The interval between application and planting rotational crop is given below. Always exclude counting days when the ground is frozen. Planting at intervals less than speciﬁed below may result in crop injury. Moisture is essential for the degradation of this herbicide in soil. If dry weather prevails, use cultivation to allow herbicide contact with moist soil. Planting/replanting restrictions for Clarity applications of 24 ﬂuid ounces per acre or less: No rotational cropping restrictions apply at 120 days or more following application. Additionally, for annual crop uses in this label including corn, cotton, sorghum, and soybean, follow the preplant use directions in section VI. Crop-Speciﬁc Infor- mation. For barley, oat, wheat, and other grass seedings, the interval between application and planting is 15 days per 8 ﬂuid ounces per acre applied east of the Mississippi River and 22 days per 8 ﬂuid ounces per acre west of the Mississippi River. Planting/replanting restrictions for applications of more than 24 ﬂuid ounces and up to 64 ﬂuid ounces of Clarity per acre: Corn, sorghum, cotton (east of the Rocky Mountains) and all other crops grown in areas with 30" or more of annual rainfall may be planted 120 days or more after application. Barley, oat, wheat, and other grass seed- ings, may be planted if the interval from application to planting is 30 days per 16 ﬂuid ounces per acre east of the Mississippi River and 45 days per 16 ﬂuid ounces per acre west of the Mississippi River. For all other crops in areas with less than 30" of annual rainfall, the interval between application and planting is 180 days or more. • Rainfast period: Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce the effectiveness of Clarity. • Stress: DO NOT apply to crops under stress due to lack of moisture, hail damage, ﬂooding, herbicide injury, mechani- cal injury, insects, or widely ﬂuctuating temperatures as injury may result. • DO NOT apply through any type of irrigation equipment. DO NOT treat irrigation ditches or water used for crop irri- gation or domestic purposes.

10 Table 4. Crop-Speciﬁc Restrictions and Limitations 1 Crop Maximum Rate Per Acre Per Application (ﬂ oz) Maximum In-Crop Rate Per Acre Per Season (ﬂ oz) Livestock Grazing or Feeding Aircraft Application Allowed Asparagus 16 16 Yes Yes Barley , Fall , Spring 8 8 12 11 Yes Yes Conservation Reserve Program (CRP) 32 64 Yes Yes Corn 16 24 Yes 2 Yes Cotton 8 8 Yes Yes Fallow Ground 32 64 Yes Yes Grass grown for seed 32 64 Yes Yes Oats 4 4 Yes Yes Pastureland 32 32 Yes Yes Proso Millet 4 4 Yes Yes Small grains grown for grass, forage, fodder, hay and/or pasture 16 16 Yes Yes Sorghum 8 16 Yes Yes Soybean 32 64 Yes Yes Sugarcane 32 64 Yes Yes Triticale 4 4 Yes Yes Sod farms and farmstead turf 32 32 Yes Yes Wheat 8 16 Yes Yes 1Refer to section VI. Crop-Specific Information for more details. 2Once the crop reaches the ensilage (milk) stage or later in maturity. VI. Crop-Speciﬁc Information Asparagus Apply Clarity ® herbicide to emerged and actively growing weeds in 40 to 60 gallons of diluted spray per treated acre immediately after cutting the ﬁeld, but at least 24 hours before the next cutting. Multiple applications may be made per growing season. If spray contacts emerged spears, crooking (twisting) of some spears may result. If such crooking occurs, discard affect- ed spears. Rates: Apply 8 to 16 ﬂuid ounces of Clarity per acre to control annual sowthistle, black mustard, Canada and Russian thistle, and redroot pigweed, (carelessweed). Apply 16 ﬂuid ounces of Clarity per acre to control common chickweed, ﬁeld bindweed, nettleleaf goosefoot, and wild radish. Multiple applications may be made per growing season. DO NOT exceed a total of 16 ﬂuid ounces of Clarity per treated acre, per crop year.

11 DO NOT harvest prior to 24 hours after treatment. DO NOT use in the Coachella Valley of California. Asparagus Tank Mixes Apply 8 to 16 ﬂuid ounces of Clarity ® herbicide per acre with glyphosate (Roundup® Ultra herbicide) or 2,4-D to improve control of Canada thistle and ﬁeld bindweed. Between Crop Applications PREPLANT DIRECTIONS (POSTHARVEST, FALLOW, CROP STUBBLE, SET-ASIDE) FOR BROADLEAF WEED CONTROL: Clarity can be applied either postharvest in the fall, spring, or summer during the fallow period or to crop stubble/set-aside acres. Apply Clarity as a broadcast or spot treatment to emerged and actively growing weeds after crop harvest (postharvest) and before a killing frost or in the fallow cropland or crop stubble the following spring or summer. See Crop-Rotational Restrictions in section V. Restrictions and Limitations for the recom- mended interval between application and planting to prevent crop injury. Rates and Timings: Apply 4 to 32 ﬂuid ounces of Clarity per acre. Refer to Table 2 to determine use rates for speciﬁc targeted weed species. For best performance, apply Clarity when annual weeds are less than 6" tall, when biennial weeds are in the rosette stage and to perennial weed regrowth in late sum- mer or fall following a mowing or tillage treatment. The most effective control of upright perennial broadleaf weeds such as Canada thistle and Jerusalem artichoke occurs if Clarity is applied when the majority of weeds have at least 4 to 6" of regrowth or for weeds such as ﬁeld bindweed and hedge bindweed that are in or beyond the full bloom stage. Avoid disturbing treated areas following application. Treat- ments may not kill weeds that develop from seed or underground plant parts such as rhizomes or bulblets, after the effective period for Clarity. For seedling control, a follow-up program or other cultural practices could be instituted. For small grain in-crop uses of Clarity, refer to the small grain section for details. Between Crop Tank Mixes In tank mixes with one or more of the following herbicides, apply 4 to 16 ﬂuid ounces of Clarity per acre for control of annual weeds, or 16 to 32 ﬂuid ounces of Clarity per acre for control of biennial and perennial weeds: • Ally® • Atrazine • Curtail ® • Fallow Master® • Finesse® • glyphosate • Kerb® • Landmaster® BW • Paramount ® • Tordon® 22K • 2,4-D Corn (Field, Pop, Seed, and Silage) Direct contact of Clarity with corn seed must be avoided. If corn seeds are less than 1.5" below the soil surface, delay application until corn has emerged. Applications of Clarity to corn during periods of rapid growth may result in temporary leaning. Corn will usually become erect within 3 to 7 days. Cultivation should be delayed until after corn is growing normally to avoid breakage. Corn may be harvested or grazed for feed once the crop has reached the ensilage (milk) stage or later in maturity. Up to 2 applications of Clarity may be made during a growing season. Sequential applications must be separat- ed by 2 weeks or more. DO NOT apply Clarity to seed corn or popcorn without ﬁrst verifying with your local seed corn company (supplier) the selectivity of Clarity on your inbred line or variety of popcorn. This precaution will help avoid potential injury of sensitive varieties. Avoid using crop oil concentrates after crop emergence as crop injury may result. Use crop oil concentrates only in dry conditions when corn is less than 5" tall and when applying Clarity alone or tank mixed with atrazine. Use of sprayable ﬂuid fertilizer as the carrier is not recom- mended for applications of Clarity made after corn emergence. Clarity is not registered for use on sweet corn. PREPLANT AND PREEMERGENCE APPLICATION IN NO TILLAGE CORN: Rates: Apply 16 ﬂuid ounces of Clarity per acre on medium- or ﬁne-textured soils containing 2.5% or greater organic matter. Use 8 ﬂuid ounces of Clarity per acre on coarse soils (sand, loamy sand, and sandy loam) or medium- and ﬁne-textured soils with less than 2.5% organic matter. Timing: Clarity can be applied to emerged weeds before, during, or after planting a corn crop. When planting into a legume sod (e.g. alfalfa or clover), apply Clarity after 4 to 6" of regrowth has occurred. • Ally® • Kerb® • Atrazine • Landmaster® BW • Curtail® • Paramount ® • Fallow Master® • Tordon® 22K • Finesse® • 2,4-D • glyphosate

12 PREEMERGENCE APPLICATION IN CONVENTIONAL OR REDUCED TILLAGE CORN: Rates: Apply 16 ﬂuid ounces of Clarity ® herbicide per treated acre to medium- or ﬁne-textured soils that contain 2.5% organic matter or more. DO NOT apply to coarse- textured soils (sand, loamy sand, or sandy loam) or any soil with less than 2.5% organic matter until after corn emergence (see Early Postemergence uses below). Timing: Clarity may be applied after planting and prior to corn emergence. Preemergence application of Clarity does not require mechanical incorporation to become active. A shallow mechanical incorporation is recommend- ed if the application is not followed by adequate rainfall or sprinkler irrigation. Avoid tillage equipment (e.g. drags, har- rows) that concentrate treated soil over seed furrow, as seed damage could result. Preemergence control of cocklebur, jimsonweed, and vel- vetleaf may be reduced if conditions such as low temperature or lack of soil moisture cause delayed or deep germination of weeds. EARLY POSTEMERGENCE APPLICATION IN ALL TILLAGE SYSTEMS: Rates: Apply 16 ﬂuid ounces of Clarity per treated acre. Reduce the rate to 8 ﬂuid ounces of Clarity per treated acre for corn grown on coarse-textured soils (sand, loamy sand, and sandy loam). Timing: Apply between corn emergence and the 5-leaf stage or 8" tall, whichever occurs ﬁrst. Refer to Late Postemergence Application if the sixth true leaf is emerging from whorl or the corn is greater than 8" tall. LATE POSTEMERGENCE APPLICATION: Rate: Apply 8 ﬂuid ounces of Clarity per treated acre. Timing: Apply Clarity from 8 to 36" tall corn or 15 days before tassel emergence, whichever comes ﬁrst. For best performance, apply when weeds are less than 3" tall. Apply directed spray when corn leaves prevent proper spray coverage, sensitive crops are growing nearby, or tank mixing with 2,4-D. DO NOT apply Clarity when soy- beans are growing nearby if any of these conditions exist: • corn is more than 24" tall • soybean are more than 10" tall • soybean have begun to bloom Corn Tank Mixes or Sequential Uses When using tank mix or sequential applications with Clarity, always follow the companion product label to determine speciﬁc use rates by soil types, weed species, and weed or crop growth stage. In addition, follow precau- tions and restrictions including state and local use restrictions that may apply to speciﬁc products. Apply Clarity prior to, in tank mix with, or after one or more of the following herbicides: • Accent® 1 • Atrazine • Axiom ® • Banvel® 1 • Beacon® 1 • Bicep® • Degree Xtra® • Dual Magnum® • Dual II Magnum® • Eradicane® • FulTime® • Glyphosate4 • Harness® Xtra • Hornet® 1 • Liberty ® 3 • Liberty Ultra 3 • Marksman ® 1 • Outlook® • Permit® 1 • Princep® • Prowl® • Python® • Spirit® 1 • Stinger® 1 • Surpass® • TopNotch® • Tough® • 2,4-D 1 1 See Table 5. Specific Guidelines for Tank Mixes or Sequential Use Programs for additional limitations or restrictions that apply for tank mix or sequential use programs with these products. 2 Sequential use only. 3 Use only on LibertyLink ® (glufosinate tolerant) corn hybrids. 4 Includes postemergence use on Roundup Ready ® (glyphosate tolerant) corn hybrids. • Accent Liberty® 1 • ® 3 • Atrazine • Liberty Ultr a3 • Axiom® • Marksman® 1 • Banvel® 1 • Outlook® • Beacon® 1 • Permit® 1 • Bicep® • Princep® • Degree Xtra® • Prowl® • Dual Magnum® • Python® • Dual II Magnum® • Spirit® 1 • Eradicane® • Stinger® 1 • FulTime® • Surpass® • Glyphosate4 • TopNotch® • Harness® Xtra • Tough® • Hornet® 1 • 2,4-D 1

13 Table 5. Speciﬁc Guidelines for Tank Mixes or Sequential Use Programs Tank Mix Partner Rate Per Acre Accent® or Beacon® When tank mixing, applications immediately following extreme day or night temperature ﬂuctuations or applications when daytime tempera- tures DO NOT exceed 50º F may result in decreased weed control or crop injury. Delay application until the temperatures warm and both weeds and crop resume normal growth. 2,4-D To provide maximum crop safety after corn emergence, use this tank mix only after corn is greater than 8" tall and when application can be made with drop pipes that direct spray beneath corn leaves and away from the whorl of the corn. The maximum rate of 2,4-D recommended in this tank mix is 0.25 pints per acre (0.125 pounds of acid equivalent per acre). Banvel® herbicide Tank mixes with these products that contain dicamba must not exceed a total combined rate of 0.50 pounds of dicamba acid equivalent per acre (0.25 pound on coarse-textured soils or on any soil when corn is greater than 8" tall). Sequential applications of these products must be separated by a minimum of 2 weeks (unless the combined rate is less than 0.5 pounds of dicamba acid equiva- lent and corn is 8" tall or less) and must not exceed a combined total of 0.75 pounds dicamba acid equivalent per acre for in-crop use. Spirit®, Stinger®, Hornet®, or Permit® For improved control of velvetleaf, tank mix 0.5 ounce of Spirit or 0.17 to 0.33 ounce Permit per acre with Clarity ® herbicide. For improved control of Canada thistle, Stinger at 1.5 to 3 ﬂuid ounces per acre or Hornet at 0.6 to 1.2 ounces per acre may be tank mixed with Clarity. Use the higher rate in the range for heavier infestations of these weeds. Cotton PREPLANT APPLICATION: Apply up to 8 ﬂuid ounces of Clarity per acre to control emerged broadleaf weeds prior to planting cotton in con- ventional or conservation tillage systems. For best performance, apply Clarity when weeds are in the 2 to 4 leaf stage and rosettes are less than 2" across. Following application of Clarity and a minimum accumula- tion of 1" of rainfall or overhead irrigation, a waiting interval of 21 days is required per 8 ﬂuid ounces per acre or less. These intervals must be observed prior to planting cotton. DO NOT apply preplant to cotton west of the Rockies. DO NOT make Clarity preplant applications to cotton in geographic areas with average annual rainfall less than 25". If applying a spring preplant treatment following application of a fall preplant (postharvest) treatment, then the combi- nation of both treatments may not exceed 2 pounds acid equivalent (64 ﬂuid ounces) per acre. Cotton Tank Mixes For control of grasses or additional broadleaf weeds, Clarity may be tank mixed with Caparol ® and glyphosate herbicides. Grass Grown for Seed Apply 8 to 16 ﬂuid ounces of Clarity per treated acre on seedling grass after the crop reaches the 3 to 5 leaf stage. Apply up to 32 ﬂuid ounces of Clarity per acre on well- established perennial grass. Fo r best performance, apply Clarity when weeds are in the 2 to 4 leaf stage and rosettes are less than 2" across. Use the higher level of listed rate ranges when treating more mature weeds or dense vegetative growth. To suppress annual grasses such as brome (downy and ripgut), rattail fescue, and windgrass, apply up to 32 ﬂuid ounces of Clarity per treated acre in the fall or late sum- mer after harvest and burning of established grass seed crops. Applications should be made immediately following the ﬁrst irrigation when the soil is moist and before weeds have more than 2 leaves. DO NOT apply Clarity after the grass seed crop begins to joint. Refer to the Pasture, Hay, Rangeland, and General Farmstead section for grazing and feeding restrictions. Grass Seed Tank Mixes Clarity may be applied in tank mixes with one or more of the following herbicides: •Buctril® •Curtail® •Express® •MCPA amine •Stinger® •2,4-D amine or ester Caparol® and glyphosate herbicides. Banvel herbicide® For improved control of velvetleaf, tank mix 0.5 ounce of Spirit or 0.17 to 0.33 ounce Permit per acre with Clarity herbicide.® For improved Spirit®®, Stinger®®, control of Canada thistle, Stinger at Hornet®®, or Permit® 1.5 to 3 ﬂuid ounces per acre or Hornet at 0.6 to 1.2 ounces per acre may be tank mixed with Clarity. Use the higher rate in the range for heavier infestations of these weeds. •Buctril® •Curtail® •Express® •MCPA amine •Stinger® •2,4-D amine or ester

14 Proso Millet For use only within Colorado, Nebraska, North Dakota, South Dakota, and Wyoming. Clarity ® herbicide combined with 2,4-D will provide con- trol or suppression of the annual broadleaf weeds listed in Table 1. Apply 4 ounces of Clarity per treated acre with 0.375 pounds a.i. of 2,4-D. Apply the tank mix of Clarity + 2,4-D as a broadcast or spot treatment to emerged and actively growing weeds and when proso millet is in the 2 to 5 leaf stage. Use directions for 2,4-D products vary with manufacturers. Refer to a 2,4-D product with labeling consistent with the crop stage timing for Clarity. Some types of proso millet may be affected adversely by a tank mix of Clarity + 2,4-D. DO NOT apply unless possible proso millet crop injury will be acceptable. Restrictions for proso millet that is grazed or cut for hay are indicated in Table 6. Timing Restrictions for Lactating Dairy Animals Following Treatment in Pasture, Hay, Rangeland, and General Farmstead section of this label. Pasture, Hay, Rangeland, and General Farmstead (noncropland) Clarity is recommended for use on pasture, hay, range- land, and general farmstead (non-cropland) (including fencerows and non-irrigation ditchbanks) for control or suppression of broadleaf weed and brush species listed in Table 1. Clarity may also be applied to non-cropland areas to con- trol broadleaf weeds in noxious weed control programs, districts, or areas including broadcast or spot treatment of roadsides and highways, utilities, railroad, and pipeline rights-of-way. Noxious weeds must be recognized at the state level, but programs may be administered at state, county, or other level. Clarity uses described in this section also pertain to grasses and small grains (forage, sorghum, rye, sudan- grass, or wheat) grown for grass, forage, fodder, hay and/ or pasture only. Grasses and small grains not grown for grass, forage, fodder, hay and/or pasture must comply with crop-speciﬁc uses in this label. Some perennial weeds may be controlled with lower rates of either Clarity or Clarity plus 2,4-D (refer to Table 2). Rates and Timings Refer to Table 2 for rate selection based on targeted weed or brush species. Some weed species will require tank mixes for adequate control. Rates above 32 ﬂuid ounces of Clarity per acre are for spot treatments only. DO NOT broadcast apply more than 32 ﬂuid ounces per acre. Retreatments may be made as needed; however, DO NOT exceed a total of 32 ﬂuid ounces of Clarity per treated acre during a growing season. Grass grown for hay requires a 7-day wait period between application and harvest. Crop-Speciﬁc Restrictions and Limitations DO NOT apply more than 16 ﬂuid ounces of Clarity per acre to small grains grown for pasture. Newly seeded areas may be severely injured if more than 16 ﬂuid ounces of Clarity is applied per acre. Established grass crops growing under stress can exhibit various injury symptoms that may be more pronounced if herbicides are applied. Bentgrass, carpetgrass, buffalograss, and St. Augustinegrass may be injured if more than 16 ﬂuid ounces of Clarity is applied per acre. Usually colonial bentgrasses are more tolerant than creep- ing types. Velvetgrasses are most easily injured. Treatments will kill or injure alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes. Table 6 lists the timing restrictions for grazing or harvest- ing hay from treated ﬁelds. There are no grazing restrictions for animals other than lactating dairy animals. Table 6. Timing Restrictions for Lactating Dairy Animals Following Treatment Clarity Rate per Treated Acre (ﬂ ozs) Days Before Grazing (days) Days Before Hay Harvest (days) 16 32 64 7 21 40 37 51 70 Clarity can be applied using water, oil in water emulsions including invert systems, or sprayable ﬂuid fertilizer as a carrier (refer to the Compatibility Test for Mix Components). To prepare oil in water emulsions, half-ﬁll spray tank with water, then add the appropriate amount of emulsiﬁer. With continuous agitation, slowly add the herbicide and then the oil (such as diesel oil or fuel oil) or a premix of oil plus addi- tional emulsiﬁer to spray tank. Complete ﬁlling of spray tank with water. Maintain vigorous agitation during spray operation to prevent oil and water from forming separate layers. Clarity may be applied broadcast using either ground or aerial application equipment. Aerial Application: • Spray Volume: Use 2 to 40 gallons of diluted spray per treated acre in a water-based carrier. Ground Application: • Spray Volume: Use 3 to 600 gallons of diluted spray per treated acre. The volume of spray applied will depend on the height, density, and type of weeds or brush being treated and on the type of equipment being used. • Spot Treatments: Clarity may be applied to individu- al clumps or small areas of undesirable vegetation

15 using handgun or similar types of application equip- ment. Apply diluted sprays to allow complete wetting (up to runoff) of foliage and stems. Cut Surface Treatments: Clarity ® herbicide may be applied as a cut surface treat- ment for control of unwanted trees and prevention of sprouts of cut trees. Rate: Mix 1 part Clarity with 1 to 3 parts water to create the application solution. Use the lower dilution rate when treating difﬁcult-to-control species. • For Frill or Girdle Treatments: Make a continuous cut or a series of overlapping cuts using an axe to gir- dle tree trunk. Spray or paint the cut surface with the solution. • For Stump Treatments: Spray or paint freshly cut surface with the water mix. The area adjacent to the bark should be thoroughly wet. Note: For more rapid foliar effects, 2,4-D may be added to the solution. Applications For Control of Dormant Multiﬂora Rose: Clarity can be applied when plants are dormant as an undiluted spot treatment directly to the soil or as a Lo-Oil basal bark treatment using an oil-water emulsion solution. • Spot treatments: Spot treatment applications of Clarity should be applied directly to the soil as close as possible to the root crown but within 6 to 8" of the crown. On sloping terrain, apply Clarity to the uphill side of the crown. DO NOT apply when snow or water prevents applying Clarity directly to the soil. The use rate of Clarity depends on the canopy diameter of the multiﬂora rose. Examples: Use 0.25, 1.0, or 2.35 ﬂuid ounces of Clarity respectively, for 5, 10, or 15 feet canopy diameters. • Lo-Oil basal bark treatments: For Lo-Oil basal bark treatments, apply Clarity to the basal stem region from the ground line to a height of 12 to 18". Spray until runoff, with special emphasis on covering the root crown. For best results, apply Clarity when plants are dormant. DO NOT apply after bud break or when plants are showing signs of active growth. DO NOT apply when snow or water prevents applying Clarity to the ground line. To prepare approximately 2 gallons of a Lo-Oil spray solution:

Combine 1.5 gallons of water, 1 ounce of emulsiﬁer, 16 ﬂuid ounces of Clarity, and 2.5 pints of No. 2 diesel fuel.
Adjust the amounts of materials used proportionately to the amount of ﬁnal spray solution desired. DO NOT exceed 8 gallons of spray solution mix applied per acre, per year. Pasture Tank Mixes Clarity may be applied in tank mixes with one or more of the following herbicides: • Ally® • Crossbow® • Curtail® • Garlon® • Glyphosate • Stinger ® • Tordon® 22K • 2,4-D Conservation Reserve Program (CRP) Clarity is recommended for use on both newly seeded and established grasses grown in Conservation Reserve or federal Set-Aside Programs. Treatments of Clarity will injure or may kill alfalfa, clovers, lespedeza, wild winter peas, vetch, and other legumes. NEWLY SEEDED AREAS Clarity may be applied either preplant or postemergence to newly seeded grasses or small grains such as barley, oats, rye, sudangrass, wheat, or other grain species grown as a cover crop. Postemergence applications may be made after seedling grasses exceed the 3-leaf stage. Rates of Clarity greater than 16 ﬂuid ounces per treated acre may severely injure newly seeded grasses. Preplant applications may injure new seedings if the inter- val between application and grass planting is less than 45 days per 16 ﬂuid ounces of Clarity applied per treated acre west of the Mississippi River or 20 days per 16 ﬂuid ounces applied east of the Mississippi River. ESTABLISHED GRASS STANDS Established grass stands are perennial grasses planted one or more seasons prior to treatment. Certain species (bentgrass, carpetgrass, smooth brome, buffalograss, or St. Augustinegrass) may be injured when treated with more than 16 ﬂuid ounces of Clarity per treated acre. When applied at recommended rates, Clarity will control many annual and biennial weeds and provide control or suppression of many perennial weeds. Rates and Timings Apply 4 to 32 ﬂuid ounces of Clarity per acre. Refer to Table 2 for rates based on target weed species. Clarity may be tank mixed or applied sequentially with other prod- ucts labeled for use in Conservation Reserve Programs such as atrazine, glyphosate, or 2,4-D. Retreatments may be made as needed; however, DO NOT exceed a total of 64 ﬂuid ounces (4 pints) of Clarity per acre per year. Small Grains not underseeded to legumes (fall- and spring-seeded barley, oat, triticale and wheat) Clarity combinations with listed tank mix partners will pro- vide control or suppression of the annual broadleaf weeds listed in Table 1. For improved control of listed weeds, • Ally® • Glyphosate • Crossbow® • Stinger® • Curtail® • Tordon® 22K • Garlon® • 2,4-D atrazine, glyphosate, or 2,4-D.

16 tank mix Clarity ® herbicide with one or more of the her- bicides listed. Clarity used in a tank mix with other herbicides offers the best spectrum of weed control and herbicide tolerant or resistant weed management. Refer to the speciﬁc crop section for Clarity application rate and timing. For applications prior to weed emergence or when sulfonylurea-resistant weeds are present or suspected, tank mix a minimum of 3 ﬂuid ounces of Clarity per treat- ed acre with a non-sulfonylurea herbicide such as 2,4-D or MCPA. Tank mixing Clarity with these products will offer more consistent control of sulfonylurea-resistant weeds. Additives: When tank mixing Clarity with sulfonylurea herbicides (Ally ®, Express®, Finesse®, Glean®, Harmony® Extra, and Peak®), use 1 to 4 pints of an agri- culturally approved surfactant (containing at least 80% active ingredient) per 100 gallons of spray or not more than 0.25 to 0.5% by volume. Use the highest rate of surfactant when using the lower rate ranges of the tank mix or when treating more mature and difﬁcult to control weeds or dense vegetative growth. Refer to the speciﬁc crop sections below for use rates. When treating difﬁcult to control weeds such as kochia, wild buckwheat, cow cockle, prostrate knotweed, Russian thistle, and prickly lettuce or when dense vegetative growth occurs, use the 3 to 4 ﬂuid ounces of Clarity per acre. Timings: Apply Clarity before, during, or after planting small grains. See speciﬁc small grain crop uses below for maximum crop stage. For best performance, apply Clarity when weeds are in the 2 to 3 leaf stage and rosettes are less than 2" across. Applying Clarity to small grains during periods of rapid growth may result in crop leaning. This condition is temporary and will not reduce crop yields. Applications to small grains may be made with aerial appli- cations with 1 gallon of water or more per acre. Where dense foliage is present, 2 to 3 gallons of water per acre should be used. Restrictions for small grain areas that are grazed or cut for hay are indicated in Table 6 in Pasture, Hay, Rangeland, and General Farmstead section of this label. Small Grains: Barley (fall- and spring-seeded) EARLY SEASON APPLICATIONS: Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to fall- seeded barley prior to the jointing stage. Apply 2 to 3 ﬂuid ounces of Clarity per acre before spring-seeded barley exceeds the 4-leaf stage. Note: For spring barley varieties that are seeded during the winter months or later, follow the rates and timings given for spring-seeded barley. DO NOT tank mix Clarity with 2,4-D in early season applications on spring-seeded barley. PREHARVEST APPLICATIONS: Clarity can be used to control weeds that may interfere with harvest of fall- and spring-seeded barley. Apply 8 ﬂuid ounces of Clarity per acre as a broadcast or spot treat- ment to annual broadleaf weeds when barley is in the hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if applica- tion can be made when weeds are actively growing, but before weeds canopy. A waiting interval of 7 days is required before harvest. DO NOT use preharvest-treated barley for seed unless a germination test is performed on the seed with an accept- able result of 95% germination or better. For control of additional broadleaf weeds or grasses, Clarity may be tank mixed with other herbicides, such as 2,4-D, that are labeled for preharvest uses in barley. DO NOT make preharvest applications in California. Barley Tank Mixes Table 7. Tank Mix Partner Rate Per Acre Ally® 0.05 to 0.1 ounce1 Bronate® 0.75 to 1.5 pints Buctril® 1 to 1.5 pints Express® 0.083 to 0.167 ounce1 Finesse® 0.167 to 0.33 ounce1 Glean® 0.167 ounce1 Harmony® Extra 0.167 to 0.33 ounce 1 MCPA amine or ester 8 to 12 ﬂuid ounces2 (0.25 to 0.375 pound a.e.) Metribuzin 0.125 to 0.47 pound a.i. 2,4-D amine or ester2,3 8 ﬂuid ounces (0.25 pound a.e.) 1 DO NOT use low rates of sulfonylureas (Ally, Express, Finesse, Glean, and Harmony Extra) on more mature weeds or on dense vegetative growth. 2 When using formulations other than 4 pounds per gallon use pounds of a.e. per acre listed. 3 This tank mix is for fall-seeded barley only Small Grains: Oat (fall- and spring-seeded) EARLY SEASON APPLICATIONS: Apply 2 to 4 ﬂuid ounces of Clarity per acre to fall-seeded oat prior to the jointing stage. Apply 2 to 4 ﬂuid ounces of Clarity per acre before spring-seeded oat exceeds the 5-leaf stage. A waiting interval of 7 days is required before harvest. (Ally®®, Express®®, Finesse®®, Glean®®, Harmony® Extra, and Peak®)), 1 (Ally, Express, Finesse, Glean, and Harmony Extra )

17 Clarity ® herbicide may be tank mixed with MCPA amine or ester for applications in oat. DO NOT tank mix Clarity with 2,4-D in oat. Small Grains: Triticale (fall- and spring-seeded) EARLY SEASON APPLICATIONS: Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to trit- icale. Early season applications to fall-seeded triticale must be made prior to the jointing stage. Early season applications to spring-seeded triticale must be made before triticale reaches the 6-leaf stage. Triticale Tank Mixes: For best performance, Clarity should be used in tank mix combination with bromoxynil (Buctril, Moxy ® 2E) herbicide. Small Grains: Wheat (fall- and spring-seeded) EARLY SEASON APPLICATIONS: Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to wheat unless using one of the fall-seeded wheat speciﬁc programs below. Early season applications to fall-seeded wheat must be made prior to the jointing stage. Early season applications to spring-seeded wheat must be made before wheat exceeds the 6-leaf stage. Early developing wheat varieties such as TAM 107 , Madison, or Wakeﬁeld must receive application between early tillering and the jointing stage. Care should be taken in staging these varieties to be certain that the application occurs prior to the jointing stage. To improve control of Russian thistle, ﬂixweed, gromwell, or mayweed, add 2,4-D amine or ester to a tank mix with one of the following herbicides: Ally ®, Express®, Finesse®, Glean®, Harmony® Extra, or Peak®. SPECIFIC USE PROGRAMS FOR FALL-SEEDED WHEAT ONLY: Clarity may be used at 6 ﬂuid ounces on fall-seeded wheat in Western Oregon as a spring application only. In Colorado, Kansas, New Mexico, Oklahoma, and Texas, up to 8 ﬂuid ounces of Clarity may be applied on fall-seeded wheat after it exceeds the 3-leaf stage for suppression of perennial weeds, such as ﬁeld bindweed. Applications may be made in the fall following a frost but before a killing freeze. Clarity may be tank mixed with 2,4-D amine at 8 ﬂuid ounces after wheat begins to tiller. Periods of extended stress such as cold and wet weather may enhance the possibility of crop injury. For fall applications only, DO NOT use if the potential for crop injury is not acceptable. PREHARVEST APPLICATIONS: Clarity can be used to control weeds that may interfere with harvest of wheat. Apply 8 ﬂuid ounces Clarity per acre as a broadcast or spot treatment to annual broadleaf weeds when wheat is in the hard dough stage and the green color is gone from the nodes (joints) of the stem. Best results will be obtained if application can be made when weeds are actively growing but before weeds canopy. A waiting interval of 7 days is required before harvest. DO NOT use preharvest-treated wheat for seed unless a germination test is performed on the seed with an accept- able result of 95% germination or better. For control of additional broadleaf weeds or grasses, Clarity may be tank mixed with other herbicides such as Ally, Roundup ® Ultra, and 2,4-D. DO NOT make preharvest applications in California. Wheat Tank Mixes Table 8. Tank Mix Partner Rate Per Acre Ally® 0.05 to 0.1 ounce1 Bronate® 0.75 to 1.5 pints Buctril® 1 to 1.5 pints Curtail® 2 to 2.67 pints Express® 0.083 to 0.167 ounce1 Finesse® 0.167 to 0.33 ounce1 Glean® 0.167 ounce1 Harmony® Extra 0.167 to 0.33 ounce 1 Glyphosate3 12 to 16 ﬂuid ounces MCPA amine or ester4 8 to 12 ﬂuid ounces (0.25 to 0.375 pound a.e.) Metribuzin2 0.25 to 0.375 pound a.i. Peak® 1 0.25 to 0.38 ounce Stinger® 4 to 5.33 ﬂuid ounces 2,4-D amine or ester5 8 to 12 ﬂuid ounces (0.25 to 0.375 pound a.e.) 1 DO NOT use low rates of sulfonylurea herbicides, such as Ally, Express, Finesse, Glean, Harmony Extra, and Peak on more mature weeds or on dense vegetative growth. 2 Tank mixes with metribuzin are for use in fall-seeded wheat only. 3 A tank mix of up to 4 ﬂuid ounces of Clarity with any glyphosate formulation labeled for use as a preplant application to small grains may be applied with no waiting period prior to planting. 4 Up to 32 ﬂuid ounces of (1.0 pound a.e.) may be used on fall-seeded wheat if crop injury is acceptable. When using formulations other than 4 pounds per gallon, use the pounds of a.e. per acre listed. Ally® 0.05 to 0.1 ounce1 Bronate® 0.75 to 1.5 pints Buctril® 1 to 1.5 pints Curtail® 2 to 2.67 pints Express® 0.083 to 0.167 ounce1 Finesse® 0.167 to 0.33 ounce1 Glean® 0.167 ounce1 Harmony® Extra 0.167 to 0.33 ounce1 Glyphosate3 12 to 16 ﬂuid ounces 8 to 12 ﬂuid ouncesMCPA amine or ester4rr (0.25 to 0.375 pound a.e.) Metribuzin2 0.25 to 0.375 pound a.i. Peak® 1 0.25 to 0.38 ounce Stinger® 4 to 5.33 ﬂuid ounces 8 to 12 ﬂuid ounces2,4-D amine or ester5 (0.25 to 0.375 pound a.e.) Ally, Express, Finesse, Glean, Harmony Extra, and Pea k

18 Sorghum Clarity ® herbicide may be applied preplant, postemer- gence, or preharvest in sorghum to control many annual broadleaf weeds and to reduce competition from estab- lished perennial broadleaf weeds, as well as control their seedlings. DO NOT graze or feed treated sorghum forage or silage prior to mature grain stage. If sorghum is grown for pasture or hay, refer to Pasture, Hay, Rangeland, and General Farmstead section of this label for speciﬁc grazing and feeding restrictions. DO NOT apply Clarity to sorghum grown for seed production. PREPLANT APPLICATION: Up to 8 ﬂuid ounces of Clarity may be applied per acre if applied at least 15 days before sorghum planting. POSTEMERGENCE APPLICATION: Up to 8 ﬂuid ounces of Clarity per acre may be applied after sorghum is in the spike stage (all sorghum emerged) but before sorghum is 15" tall. For best performance, apply Clarity when the sorghum crop is in the 3 to 5 leaf stage and weeds are small (less than 3" tall). Use drop pipes (drop nozzles) if sorghum is taller than 8". Keep the spray off the sorghum leaves and out of the whorl to reduce the likelihood of crop injury and to improve spray coverage of weed foliage. Applying Clarity to sorghum during periods of rapid growth may result in temporary leaning of plants or rolling of leaves. These effects are usually outgrown within 10 to 14 days. Delay harvest until 30 days after treatment. Preharvest uses in Texas and Oklahoma only: Up to 8 ﬂuid ounces of Clarity per acre may be applied for weed suppression any time after the sorghum has reached the soft dough stage. An agriculturally approved surfactant may be used to improve performance. For aerial applica- tions, use at least 2 gallons of water-based carrier per treated acre. Delay harvest until 30 days after a preharvest treatment. SPLIT APPLICATION: Clarity may be applied in split applications: preplant fol- lowed by postemergence or preharvest; or postemergence followed by preharvest. DO NOT exceed 8 ﬂuid ounces per acre, per application or a total of 16 ounces per acre, per season. Sorghum Tank Mixes and Sequential Treatments Clarity may be applied prior to, in a tank mix with, or after one or more of the following herbicides: • Atrazine • Basagran ® • Bicep II Magnum® • Buctril® • Dual Magnum® • Dual II Magnum® • Fallow Master® • Glyphosate • Landmaster® • Outlook® • Paramount ® • Peak® • Permit® Soybean PREPLANT APPLICATIONS: Apply 4 to 16 ﬂuid ounces of Clarity per acre to control emerged broadleaf weeds prior to planting soybeans. DO NOT exceed 16 ﬂuid ounces of Clarity per acre in a spring application prior to planting soybeans. Following application of Clarity and a minimum accumula- tion of 1" rainfall or overhead irrigation, a waiting interval of 14 days is required for 8 ﬂuid ounces per acre or less, and 28 days for 16 ﬂuid ounces per acre. These intervals must be observed prior to planting soybeans or crop injury may occur. DO NOT make Clarity preplant applications to soybeans in geographic areas with average annual rainfall less than 25". PREHARVEST APPLICATIONS: Clarity can be used to control many annual and perennial broadleaf weeds and control or suppress many biennial and perennial broadleaf weeds in soybean prior to harvest (refer to Table 1). Apply 8 to 32 ﬂuid ounces of Clarity per acre as a broadcast or spot treatment to emerged and actively growing weeds after soybean pods have reached mature brown color and at least 75% leaf drop has occurred. DO NOT harvest soybeans until 7 days after application. Treatments may not kill weeds that develop from seed or underground plant parts, such as rhizomes or bulblets, after the effective period for Clarity. For seedling control, a follow-up program or other cultural practice could be instituted. DO NOT use preharvest-treated soybean for seed unless a germination test is performed on the seed with an acceptable result of 95% germination or better. DO NOT feed soybean fodder or hay following a prehar- vest application of Clarity. DO NOT make preharvest applications in California. • Atrazine • Glyphosate • Basagran ® • Landmaster® • Bicep II Magnum® • Outlook® • Buctril® • Paramount® • Dual Magnum® • Peak® • Dual II Magnum® • Permit® • Fallow Master®

19 Soybean Tank Mixes PREPLANT TANK MIXES: Clarity ® herbicide may be tank mixed with other herbi- cides registered for early preplant use in soybeans including burndown herbicides such as glyphosate and 2,4-D or residual herbicides such as Outlook ® or Dual Magnum®. PREHARVEST TANK MIXES: Clarity may be tank mixed with other herbicides regis- tered for preharvest use in soybeans such as glyphosate. Sugarcane Apply Clarity for control of annual, biennial, or perennial broadleaf weeds listed in Table 1. Apply 8 to 24 ﬂuid ounces of Clarity per acre for control of annual weeds, 16 to 32 ﬂuid ounces for control of biennial weeds and for control or suppression of perennial weeds. Use the higher level of listed rate ranges when treating dense vegetative growth. Retreatments may be made as needed, however, DO NOT exceed a total of 64 ﬂuid ounces of Clarity per treated acre during a growing season. Timing: Clarity may be applied to sugarcane any time after weeds have emerged, but before the close-in stage of sugarcane. Applications of 32 ﬂuid ounces of Clarity per acre made over the top of actively growing sugarcane may result in crop injury. When possible, direct the spray beneath the sugarcane canopy to minimize the likelihood of crop injury. Using directed sprays will also help maximize the spray coverage of weed foliage. Delay harvest until 87 days after treatment. Sugarcane Tank Mixes Clarity may be tank mixed with other products registered for use in sugarcane such as Asulox®, atrazine, Evik®, and 2,4-D. Farmstead Turf (noncropland) and Sod Farms DO NOT use on residential sites. For use in general farmstead (noncropland) and sod farms, apply 3 to 32 ﬂuid ounces of Clarity per acre to control or suppress growth of many annual, biennial, and some perennial broadleaf weeds commonly found in turf. Clarity will also suppress many other listed perennial broadleaf weeds and woody brush and vine species. Refer to Table 2 for rate recommendations based on targeted weed or brush species and growth stage. Some weed species will require tank mixes for adequate control. Repeat treatments may be made as needed; however, DO NOT exceed 32 ﬂuid ounces of Clarity per acre, per growing season. Apply 30 to 200 gallons of diluted spray per treated acre (3 to 17 quarts of water per 1,000 square feet), depending on density or height of weeds treated and on the type of equipment used. To avoid injury to newly seeded grasses, delay application of Clarity until after the second mowing. Furthermore, applying more than 16 ﬂuid ounces of Clarity per treated acre may cause noticeable stunting or discoloration of sensitive grass species such as bentgrass, carpetgrass, buffalograss, and St. Augustinegrass. In areas where roots of sensitive plants extend, DO NOT apply more than 4 ﬂuid ounces of Clarity per treated acre on coarse-textured (sandy-type) soils, or in excess of 8 ﬂuid ounces per treated acre on ﬁne-textured soils. DO NOT make repeat applications in these areas for 30 days and until previous applications of Clarity have been activated in the soil by rain or irrigation. Farmstead Turf (noncropland) and Sod Farm Tank Mixes Apply 3.2 to 8 ﬂuid ounces of Clarity per acre in a tank mix with one of the products in Table 9 at the rates listed. Use the higher rates when treating established weeds. Table 9. Tank Mix Partner Rate Per Acre Bromoxynil (Buctril ®) 0.375 to 0.5 pound a.i. MCPA 0.5 to 1.5 pounds a.e. MCPP 0.5 to 1.5 pounds a.e. 2,4-D 0.5 to 1.5 pounds a.e. Crops This product can be used on the following crops: Asparagus Conservation Reserve Program (CRP) Corn Cotton Fallow Systems (Between Crop Applications) Proso Millet Pastures, Rangeland, General Farmstead Small Grains (Barley, Oat, Triticale and Wheat) Sod Farms and Farmstead Turf Sorghum Soybean Sugarcane Look inside for complete Restrictions and Limitations and Application Instructions . glyphosate and 2,4-D or residual herbicides such as Outlook® or Dual Magnum®. glyphosate

20 Pests listed in this label Common Name Scientiﬁc Name ANNUALS Alkanet Amaranth , Palmer , Powell , Spiny Aster, Slender Bedstraw, Catchweed Beggarweed, Florida Broomweed, Common Buckwheat , Tartary , Wild Buffalobur Burclover, California Burcucumber Buttercup , Corn , Roughseed Carpetweed Catchﬂy, Nightﬂowering Chamomile, Corn Chervil, Bur Chickweed, Common Clovers Cockle , Corn , Cow , White Cocklebur, Common Copperleaf, Hophornbeam Cornﬂower (Bachelor Button) Croton , Tropic , Woolly Daisy, English Dragonhead, American Eveningprimrose, Cutleaf Falseﬂax, Smallseed Fleabane, Annual Flixweed Fumitory Goosefoot, Nettleleaf Hempnettle Henbit Jacob’s Ladder Jimsonweed Knawel (German Moss) Knotweed, Prostrate Kochia Ladysthumb Lambsquarters, Common Lettuce , Miners , Prickly Mallow , Common , Venice Marestail (Horseweed) Mayweed Morningglory , Ivyleaf , Tall Mustard , Black , Blue , Tansy , Treacle , Tumble , Wild Nightshade , Black , Cutleaf Lithospermum arvense Amaranthus palmeri Amaranthus powellii Amaranthus spinosus Aster subulatus Galium aparine Desmodium tortuosum Gutierrezia dracunculoides Fagopyrum tataricum Polygonum convolvulus Solanum rostratum Medicago polymorpha Sicyos angulatus Ranunculus arvensis Ranunculus muricatus Mollugo verticillata Silene noctiﬂorum Anthemis arvensis Anthriscus caucalis Stellaria media Trifolium spp. Agrostemma githago Vaccaria pyramidata Melandrium album Xanthium strumarium Acalypha ostryifolia Centaurea cyanus Croton glandulosus Croton capitatus Bellis perennis Dracocephalum parviﬂorum Oenothera laciniata Camelina microcarpa Erigeron annuus Descurainia sophia Fumaria ofﬁcinalis Chenopodium murale Galeopsis tetrahit Lamium amplexicaule Polemonium caeruleum Datura stramonium Scleranthus annuus Polygonum aviculare Kochia scoparia Polygonum persicaria Chenopodium album Claytonia perfoliata Lactuca serriola Malva neglecta Hibiscus trionum Hippuris vulgaris Anthemis cotula Ipomea hederacea Ipomea purpurea Brassica nigra Chorispora tenella Descurainia pinnata Erysimum repandum Sisymbrium altissimum Sinapis arvensis Solanum nigrum Solanum triﬂorum Pests listed in this label (continued) Common Name Scientiﬁc Name ANNUALS (continued) Pennycress, Field (Fanweed, Frenchweed, Stinkweed) Pepperweed, Virginia (Peppergrass) Pigweed , Prostrate , Redroot (Carelessweed) , Smooth , Tumble Pineappleweed Poorjoe Puncturevine Purslane, Common Pusley, Florida Radish, Wild Ragweed , Common , Giant (Buffaloweed) , Lance-Leaf Ragwort, Tansy Rocket , London , Yellow Rubberweed, Bitter Salsify Sesbania, Hemp Shepherdspurse Sicklepod Sida, Prickly (Teaweed) Smartweed , Green , Pennsylvania Sneezeweed, Bitter Sowthistle , Annual , Spiny Spikeweed, Common Spurge, Prostrate Spurry, Corn Starbur, Bristly Starwort, Little Sumpweed, Rough Sunﬂower, Common (Wild) Thistle, Russian Velvetleaf Waterhemp , Common , Tall Waterprimrose, Winged Wormwood BIENNIALS Burdock, Common Carrot, Wild (Queen Anne’s Lace) Cockle, White Eveningprimrose, Common Geranium, Carolina Gromwell Knapweed , Diffuse , Spotted Mallow, Dwarf Plantain, Bracted Ragwort, Tansy Starthistle, Yellow Sweetclover Teasel Thistle , Bull , Musk , Plumeless Thlaspi arvense Lepidium virginicum Amaranthus blitoides Amaranthus retroﬂexus Amaranthus hybridus Amaranthus albus Matricaria matricarioides Diodia teres Tribulus terrestris Portulaca oleracea Richardia scabra Raphanus raphanistrum Ambrosia artemisiifolia Ambrosia triﬁda Ambrosia bidentata Senecio jacobaea Sisymbrium irio Barbarea vulgaris Hymenoxys odorata Tragopogon porrifolius Sesbania exaltata Capsella bursa-pastoris Cassia obtusifolia Sida spinosa Polygonum scabrum Polygonum pensylvanicum Helenium amarum Sonchus oleraceus Sonchus asper Hemizonia pungens Euphorbia humistrata Spergula arvensis Acanthospermum hispidum Stellaria graminea Iva ciliata Helianthus annuus Salsola iberica Abutilon theophrasti Amaranthus rudis Amaranthus tuberculatus Ludwigia decurrens Artemisia annua Arctium minus Daucus carota Melandrium album Oenothera biennis Geranium carolinianum Lithospermum spp. Centaurea diffusa Centaurea maculosa Malva borealis Plantago aristata Senecio jacobaea Centaurea solstitialis Melilotus spp. Dipsacus sativus Cirsium vulgare Carduus nutans Carduus acanthoides

21 Pests listed in this label (continued) Common Name Scientiﬁc Name PERENNIALS Alfalfa Artichoke, Jerusalem Aster , Spiny , Whiteheath Bedstraw, Smooth Bindweed , Field , Hedge Blueweed, Texas Bursage, Woollyleaf, (Bur Ragweed, Povertyweed) Buttercup, Tall Campion, Bladder Chickweed , Field , Mouseear Chicory Clover, Hop Dandelion Dock , Broadleaf (Bitterdock) , Curly Dogbane, Hemp Dogfennel (Cypressweed) Fern, Bracken Garlic, Wild Goldenrod , Canada , Missouri Goldenweed, Common Hawkweed Henbane, Black Horsenettle, Carolina Ironweed Knapweed , Black , Russian Milkweed , Common , Honeyvine , Western Whorled Nettle, Stinging Nightshade, Silverleaf (White Horsenettle) Onion, Wild Plantain , Broadleaf , Buckhorn Pokeweed Ragweed, Western Redvine Sericea Lespedeza Smartweed, Swamp Snakeweed, Broom Sorrel, Red (Sheep Sorrel) Sowthistle, Perennial Spurge, Leafy Sundrops Thistle , Canada , Scotch Toadﬂax, Dalmatian Tropical Soda Apple Trumpetcreeper (Buckvine) Vetch Waterhemlock, Spotted Waterprimrose, Creeping Woodsorrel , Creeping , Yellow Wormwood , Absinth , Louisiana Yankeeweed Yarrow, Common Medicago sativa Helianthus tuberosus Aster spinosus Aster pilosus Gallium mollugo Convolvulus arvensis Calystegia sepium Helianthus ciliaris Ambrosia grayi Ranunculus acris Silene vulgaris Cerastium arvense Cerastium vulgatum Cichorium intybus Trifolium aureum Taraxacum ofﬁcinale Rumex obtusifolius Rumex crispus Apocynum cannabinum Eupatorium capillifolium Pteridium aquilinum Allium vineale Solidago canadensis Solidago missouriensis Isocoma coronopifolia Hieracium spp. Hyoscyamus niger Solanum caroliniense Vernonia spp. Centaurea nigra Centaurea repens Asclepias syriaca Ampelamus albidus Asclepias subverticillata Urtica dioica Solanum elaeagnifolium — Allium canadense Plantago major Plantago lanceolata Phytolacca americana Ambrosia psilostachya Brunnichia ovata Lespedeza cuneata Polygonum coccineum Gutierrezia sarothrae Rumex acetosella Sonchus arvensis Euphorbia esula Oenothera perennis Cirsium arvense Onopordum acanthium Linaria genistifolia Solanum viarum Campsis radicans Vicia spp. Cicuta maculata Ludwigia peploides Oxalis corniculata Oxalis stricta Artemisia absinthium Artemisia ludoviciana Eupatorium compositifolium Achillea millefolium Pests listed in this label (continued) Common Name Scientiﬁc Name WOODY SPECIES Alder Ash Aspen Basswood Beech Birch Blackberry Blackgum Cedar Cherry Chinquapin Cottonwood Creosotebush Cucumbertree Dewberry Dogwood Elm Grape Hawthorn (Thornapple) Hemlock Hickory Honeylocust Honeysuckle Hornbeam Huckleberry Huisache Ivy, Poison Kudzu Locust, Black Maple Mesquite Oak Oak, Poison Olive, Russian Persimmon, Eastern Pine Plum, Sand (Wild Plum) Poplar Rabbitbrush Redcedar, Eastern Rose , McCartney , Multiﬂora Sagebrush, Fringed Sassafras Serviceberry Spicebush Spruce Sumac Sweetgum Sycamore Tarbush Willow Witchhazel Yaupon Yucca Alnus spp. Fraxinus spp. Populus spp. Tilia americana Fagus spp. Betula spp. Rubus spp. Nyssa spp. Cedrus spp. Prunus spp. Chrysolepis chrysophylla Populus deltoides Larrea tridentata Magnolia acuminata Rubus caesius Cornus spp. Ulmus spp. Vitus spp. Crataegus spp. Tsuga spp. Carya spp. Gleditsia triacanthos Lonicera spp. Carpinus spp. Vaccinium arboreum Acacia farnesiana Rhus radicans Pueraria lobata Robinia pseudoacacia Acer spp. Prosopis ruscifolia Quercus spp. Rhus toxicodendron Elaeagnus angustifolia Diospyros virginiana Pinus spp. Prunus amygdalus Populus spp. Chrysothamnus pulchellus Juniperus virginiana Rosa bracteata Rosa multiﬂorum Artemisia frigida Sassafras albidum Amelanchier sanguinea Lindera benzoin Picea spp. Rhus spp. Liquidambar styraciﬂua Platanus occidentalis Flourensia cernua Salix spp. Hamamelis macrophylla Ilex spp. Yucca spp.

22 Conditions of Sale and Warranty The Directions For Use of this product reﬂect the opinion of experts based on ﬁeld use and tests. The directions are believed to be reliable and must be followed carefully. However, it is impossible to eliminate all risks inherently associated with the use of this product. Crop injury, ineffectiveness or other unintended consequences may result because of such factors as weather conditions, presence of other materials, or use of the product in a manner inconsistent with its labeling, all of which are beyond the control of BASF Agricultural Solutions US LLC (“BASF”) or the Seller. To the extent consistent with applicable law, all such risks shall be assumed by the Buyer. BASF warrants that this product conforms to the chemical description on the label and is reasonably ﬁt for the purposes referred to in the Directions For Use , subject to the inherent risks, referred to above. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS OR MERCHANTABILITY OR ANY OTHER EXPRESS OR IMPLIED WARRANTY. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S EXCLUSIVE LIABILITY, WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL BE LIMITED TO REPAYMENT OF THE PURCHASE PRICE OF THE PRODUCT. TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, BASF AND THE SELLER DISCLAIM ANY LIABILITY FOR CONSEQUENTIAL, EXEMPLARY, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. BASF and the Seller offer this product, and the Buyer and User accept it, subject to the foregoing Conditions of Sale and Warranty which may be varied only by agreement in writing signed by a duly authorized representative of BASF. 1108 © 2026 BASF Agricultural Solutions US LLC All rights reserved. 007969-00137 .20260504b.NVA 2026-04-0065-0061 Supersedes: NVA 2010-04-065-0154 BASF Agricultural Solutions US LLC 2 TW Alexander Drive Research Triangle Park, NC 27713 Banvel, Basagran, Clarity, CLEARFIELD, Liberty, LibertyLink , Outlook, Paramount, Prowl, Surtain,a n d Zidua are registered trademarks of BASF. Accent, Ally, Asana, Crossbow, Curtail, Express, Finesse, FirstRate, FulTime, Garlon, Glean, Harmony, Hornet, Kerb, Lorsban, Python, Stinger, and Tordon are registered trademarks of Corteva Agriscience LLC. Ambush, Beacon, Bicep II Magnum, Caparol, Dual Magnum, Dual II Magnum, Eradicane, Evik, Peak, Princep, Surpass, Topnotch, Tough, and Warrior are registered trademarks of Syngenta Group Company. Asulox, Axiom, Bronate, Buctril, Degree Xtra, Fallow Master, Harness, Landmaster, and Roundup Ready are registered trademarks of Bayer CropScience. Delavan is a registered trademark of Garlock International, Inc. Moxy is a registered trademark of Winﬁeld Solutions, LLC. Permit is a registered trademark of Nissan Chemical Industries, Ltd. Pounce is a registered trademark of FMC Corp. Turbo Teejet and Turbo Floodjet are registered trademarks of Spraying Systems, Inc. Spirit is a registered trademark of Gowan Company. Banvel, ll Basagran, Clarity, yy CLEARFIELD, Liberty,yy LibertyLink ,kk Outlook, kk Paramount,t Prowl,ll Surtain, and Zidua are registered trademarks of BA SF. Accent,t Ally, yy Asana, Crossbow, ww Curtail,ll Express, Finesse, FirstRate, FulTime, Garlon, Glean, Harmony,yy Hornet,t Kerb, Lorsban, Python, Stinger, and rr Tordon are registered trademarks of Corteva A griscience LLC. Ambush, Beacon, Bicep II Magnum, Caparol, ll Dual Magnum, Dual II Magnum, Eradicane, Evik,kk Peak,kk Princep, Surpass, Topnotch, Tough, and Warrior are registered r trademarks of Syngenta Group Company. Asulox,x Axiom, Bronate, Buctril, ll Degree Xtra, Fallow Master,rr Harness, Landmaster, rr and Roundup Ready arey registered trademarks of Bayer CropScience. 007969-00137.20260504b.NVA 2026-04-0065-0061

95 KiB Raw Blame History Unescape Escape

CLARITY HERBICIDE

95 KiB

Raw Blame History