crop-chem-docs/corpus/epa_ppls/7969-137.md

# CLARITY HERBICIDE

- EPA Reg No: **7969-137**
- Registrant: BASF AGRICULTURAL SOLUTIONS US, LLC
- Signal word: Caution
- Active ingredients: Dicamba, diglycolamine salt (58.1%)
- Label accepted: 2026-07-30
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/007969-00137-20260730.pdf

---
July 30, 2026
SENT BY EMAIL
Matthew Feinberg
matthew.feinberg@basf.com
BASF AGRICULTURAL SOLUTIONS US LLC
Subject: Labeling Notification per Pesticide Registration Notice (PRN) 98-10 - Minor Label Revisions
Product Name: CLARITY HERBICIDE
Admin Number: 7969-137
EPA Receipt Date: 05/14/2026
Action Case Number: 00698669
Dear Matthew Feinberg:
The U.S. Environmental Protection Agency is in receipt of your application for notification under Pesticide
Registration Notice 98-10 for the above referenced product. The EPA has conducted a review of this request
for its applicability under PRN 98-10 and finds that the action requested falls within the scope of PRN 98-10.
The labeling submitted with this application has been stamped "Notification" and will be placed in our records.
Should you wish to add/retain a reference to your company’s website on your label, then please be aware that
the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to
review by the EPA. If the website is false or misleading, the product will be considered to be misbranded and
sale or distribution of the product is unlawful under FIFRA section 12(a)(1)(E). 40 CFR § 156.10(a)(5) lists
examples of statements the EPA may consider false or misleading. In addition, regardless of whether a
website is referenced on your product’s label, claims made on the website may not substantially differ from
those claims approved through the registration process. Therefore, should the EPA find or if it is brought to
our attention that a website contains statements or claims substantially differing from statements or claims
made in connection with obtaining a FIFRA section 3 registration, the website will be referred to the EPA’s
Office of Enforcement and Compliance Assurance.
If you have questions, please contact Jamie Millard via email at millard.jamie@epa.gov.
Sincerely,
Kable Bo Davis, Senior Advisor
HB, RD
Office of Pesticide Programs
Kable Bo Davis

For weed control in asparagus, Conservation Reserve Programs,
CRP land, corn, cotton, fallow croplands, general farmstead
(noncropland), sorghum, grass grown for seed, hay, proso millet,
pasture, rangeland, small grains, sod farms and farmstead
turfgrass, soybean, and sugarcane
Active Ingredient:
Diglycolamine salt of 3,6-dichloro-o-anisic acid* ......................... 58.1%
Other Ingredients:............................................... 41.9%
Total.......................................................... 100.0%
*Contains 39.4% 3,6-dichloro-o-anisic acid (4 pounds acid equivalent per gallon or 480 grams per liter).
EPA Reg. No. 7969-137 EPA Est. No.
KEEP OUT OF REACH OF CHILDREN
CAUTION/PRECAUCIÓN
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en
detalle. (If you do not understand the label, ﬁnd someone to explain it to you in detail.)
See inside booklet for complete First Aid, Precautionary Statements, Directions For
Use, Conditions of Sale and Warranty, and state-speciﬁc crop and/or use site
restrictions.
In case of an emergency endangering life or property involving this product,
call day or night 1-800-832-HELP (4357).
Net Contents:
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Dicamba Group 4 Herbicide
7969-137
07/30/2026

2
Precautionary Statements
HAZARDS TO HUMANS
AND DOMESTIC ANIMALS
CAUTION
Causes moderate eye irritation. Harmful if swallowed or
absorbed through skin. Avoid contact with skin, eyes or
clothing.
Personal Protective Equipment (PPE)
Some materials that are chemical-resistant to this product
are nitrile rubber and butyl rubber. If you want more
options, follow the instructions for Category C on an EPA
chemical-resistance category selection chart.
All mixers, loaders, and applicators and other han-
dlers must wear:
• Long-sleeved shirt and long pants
• Chemical-resistant gloves (except for pilots)
• Shoes plus socks
See Engineering Controls Statement for additional
requirements. Follow the manufacturer’s instructions for
cleaning and maintaining PPE. If no such instructions for
washables exist, use detergent and hot water. Keep and
wash PPE separately from other laundry.
Engineering Controls Statement
When handlers use closed systems, enclosed cabs, or air-
craft in a manner that meets the requirements listed in the
Worker Protection Standard (WPS) for agricultural pesti-
cides [40 CFR 170.240(d)(4-6)], the handler PPE
requirements may be reduced or modiﬁed as speciﬁed in
the WPS.
Pilots must use cockpits in a manner that meets the
requirements listed in the Worker Protection Standard
(WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6).
User Safety Recommendations
Users should:
• Wash hands before eating, drinking, chewing gum,
using tobacco, or using the toilet.
• Remove clothing/PPE immediately if pesticide gets
inside. Then wash thoroughly and put on clean
clothing.
• Remove PPE immediately after handling this product.
Wash the outside of gloves before removing. As soon
as possible, wash thoroughly and change into clean
clothing.
Environmental Hazards
DO NOT apply directly to water, or to areas where surface
water is present or to intertidal areas below the mean high
water mark. DO NOT contaminate water when disposing
of equipment washwaters or rinsate. Apply this product
only as directed on the label.
This chemical is known to leach through soil into ground
water under certain conditions as a result of agricultural
use. Use of this chemical in areas where soils are perme-
able, particularly where the water table is shallow, may
result in ground water contamination.
Ground and Surface Water Protection
Point source contamination: To prevent point source
contamination, DO NOT mix, load this pesticide product
within 50 feet of wells (including abandoned wells and
drainage wells), sink holes, perennial or intermittent
streams and rivers, and natural or impounded lakes and
reservoirs. DO NOT apply pesticide product within 50 feet
of wells. This setback does not apply to properly capped
or plugged abandoned wells and does not apply to imper-
vious pad or properly diked mixing/loading areas as
described below.
Mixing, loading, rinsing, or washing operations performed
within 50 feet of a well are allowed only when conducted
on an impervious pad constructed to withstand the weight
of the heaviest load that may be on or move across the
pad. The pad must be self-contained to prevent surface
FIRST AID
If swallowed
• Call a poison control center or doctor immediately for treatment advice.
• Have person sip a glass of water if able to swallow.
• DO NOT induce vomiting unless told to do so by a poison control center or doctor.
• DO NOT give anything to an unconscious person.
If on skin or clothing
• Take off contaminated clothing.
• Rinse skin immediately with plenty of water for 15 to 20 minutes.
• Call a poison control center or doctor for treatment advice.
If in eyes
• Hold eye open and rinse slowly and gently with water for 15 to 20 minutes.
• Remove contact lenses, if present, after ﬁrst 5 minutes, then continue rinsing eye.
• Call a poison control center or doctor for treatment advice.
HOT LINE NUMBER
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
You may also contact BASF Agricultural Solutions US LLC (hereafter “BASF”) for emergency medical treatment infor-
mation: 1-800-832-HELP (4357).

3
water ﬂow over or from the pad. The pad capacity must be
maintained at 110% that of the largest pesticide container
or application equipment used on the pad and have sufﬁ-
cient capacity to contain all product spills, equipment or
container leaks, equipment wash waters, and rainwater
that may fall on the pad. The containment capacity does
not apply to vehicles delivering pesticide shipments to the
mixing/loading site. States may have in effect additional
requirements regarding wellhead setbacks and operational
containment.
Care must be taken when using this product to prevent:
a) back siphoning into wells, b) spills or c) improper dispos-
al of excess pesticide, spray mixtures or rinsates. Check
valves or antisiphoning devices must be used on all mixing
equipment.
Movement by surface runoff or through soil:
DO NOT apply under conditions which favor runoff.
DO NOT apply to impervious substrates such as paved or
highly compacted surfaces in areas with high potential for
ground water contamination. Ground water contamination
may occur in areas where soils are permeable or coarse
and ground water is near the surface. DO NOT apply to
soils classiﬁed as sand with less than 3% organic matter
and where ground water depth is shallow. To minimize the
possibility of ground water contamination, carefully follow
application rate recommendations as affected by soil type
in the general information section of this label.
Movement by water erosion of treated soil: DO NOT
apply or incorporate this product through any type of irri-
gation equipment nor by ﬂood or furrow irrigation. Ensure
treated areas have received at least one-half inch rainfall
(or irrigation) before using tailwater for subsequent irriga-
tion of other ﬁelds.
Endangered Species Concerns
The use of any pesticide in a manner that may kill or other-
wise harm an endangered species or adversely modify
their habitat is a violation of federal law.
Directions For Use
It is a violation of federal law to use this product in a man-
ner inconsistent with its labeling. DO NOT apply this
product in a way that will contact workers or other per-
sons, either directly or through drift. Only protected
handlers may be in the area during application. For any
requirements speciﬁc to your state or tribe, consult the
agency responsible for pesticide regulation.
Unless otherwise directed in supplemental labeling, all
applicable directions, restrictions, precautions and
Conditions of Sale and Warranty are to be followed.
This labeling must be in the user’s possession during
application.
Agricultural Use Requirements
Use this product only in accordance with its labeling and
with the Worker Protection Standard, 40 CFR part 170.
This Standard contains requirements for the protection
of agricultural workers on farms, forests, nurseries and
greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination,
notiﬁcation, and emergency assistance. It also contains
speciﬁc instructions and exceptions pertaining to the
statements on this label about Personal Protective
Equipment (PPE), and restricted-entry intervals. The
requirements in this box only apply to uses of this prod-
uct that are covered by the WPS.
DO NOT enter or allow worker entry into treated areas
during the restricted-entry interval (REI) of 24 hours.
PPE required for early entry to treated areas that is per-
mitted under the Worker Protection Standard and that
involves contact with anything that has been treated,
such as, plants, soil, or water is:
• Coveralls worn over short-sleeved shirt and short
pants
• Chemical-resistant footwear plus socks
• Chemical-resistant gloves made of any waterproof
material
• Chemical-resistant headgear for overhead exposure
• Protective eyewear
Non-agricultural Use Requirements
The requirements in this box apply to uses of this prod-
uct that are NOT within the scope of the Worker
Protection Standard for agricultural pesticides (40 CFR
Part 170). The WPS applies when this product is used to
produce agricultural plants on farms, forests, nurseries,
or greenhouses.
DO NOT enter or allow people (or pets) to enter the
treated area until sprays have dried. DO NOT apply this
product in a way that will contact workers or other per-
sons, either directly or through drift. Only protected
handlers may be in the area during application.
Storage and Disposal
DO NOT contaminate water, food, or feed by storage or
disposal. Open dumping is prohibited. This product
must not be mixed, loaded, or used within 50 feet of all
wells including abandoned wells, drainage wells, and
sinkholes.
Pesticide Storage: Groundwater contamination may
be reduced by diking and ﬂooring of permanent liquid
bulk storage sites with an impermeable material. Store in
original container in a well-ventilated area separately
from fertilizer, feed, and foodstuffs. Avoid cross-
contamination with other pesticides.
(continued)
must

4
Storage and Disposal (continued)
Pesticide Disposal: Wastes resulting from this product
must be disposed of on site or at an approved waste
disposal facility.
Pesticide, spray mixture, or rinsate that cannot be used
according to label instructions must be disposed of
according to federal, state or local procedures under
Subtitle C of the Resource Conservation and
Recovery Act. Improper disposal of excess pesticide,
spray mix, or rinsate is a violation of federal law.
Container Handling:
Nonreﬁllable Container. DO NOT reuse or reﬁll this
container. Triple rinse or pressure rinse container (or
equivalent) promptly after emptying; then offer for recy-
cling, if available, or reconditioning, if appropriate, or
puncture and dispose of in a sanitary landﬁll, or by incin-
eration, or by other procedures approved by state and
local authorities.
Triple rinse containers small enough to shake
(capacity ≤ 5 gallons) as follows: Empty the
remaining contents into application equipment or a
mix tank and drain for 10 seconds after the ﬂow
begins to drip. Fill the container 1/4 full with water and
recap. Shake for 10 seconds. Pour rinsate into appli-
cation equipment or a mix tank, or store rinsate for
later use or disposal. Drain for 10 seconds after the
ﬂow begins to drip. Repeat this procedure two more
times.
Triple rinse containers too large to shake
(capacity > 5 gallons) as follows: Empty the
remaining contents into application equipment or a
mix tank. Fill the container 1/4 full with water. Replace
and tighten closures. Tip container on its side and roll
it back and forth, ensuring at least one complete revo-
lution, for 30 seconds. Stand the container on its end
and tip it back and forth several times. Empty the rin-
sate into application equipment or a mix tank, or store
rinsate for later use or disposal. Repeat this procedure
two more times.
Pressure rinse as follows: Empty the remaining
contents into application equipment or mix tank. Hold
container upside down over application equipment or
mix tank, or collect rinsate for later use or disposal.
Insert pressure rinsing nozzle in the side of the con-
tainer and rinse at about 40 PSI for at least
30 seconds. Drain for 10 seconds after the ﬂow
begins to drip.
Reﬁllable Container. Reﬁll this container with pesticide
only. DO NOT reuse this container for any other pur-
pose. Triple rinsing the container before ﬁnal disposal is
the responsibility of the person disposing of the contain-
er. Cleaning before reﬁlling is the responsibility of the
reﬁller.
(continued)
Storage and Disposal (continued)
Triple rinse as follows: To clean the container
before ﬁnal disposal, empty the remaining contents
from this container into application equipment or mix
tank. Fill the container about 10% full with water. Agi-
tate vigorously or recirculate water with the pump for
2 minutes. Pour or pump rinsate into application
equipment or rinsate collection system. Repeat this
rinsing procedure two more times.
When this container is empty, replace the cap and seal
all openings that have been opened during use; return
the container to the point of purchase or to a designated
location. This container must only be reﬁlled with a pesti-
cide product. DO NOT reuse the container for any other
purpose. Prior to reﬁlling, inspect carefully for damage
such as cracks, punctures, abrasions, worn-out threads
and closure devices. Check for leaks after reﬁlling and
before transport. DO NOT transport if this container is
damaged or leaking. If the container is damaged, or
leaking, or obsolete and not returned to the point of pur-
chase or to a designated location, triple rinse emptied
container and offer for recycling, if available, or dispose
of container in compliance with state and local
regulations.
In Case of Spill
In case of large-scale spillage regarding this product, call:
CHEMTREC 1-800-424-9300
BASF 1-800-832-HELP (4357)
Steps to be taken in case material is released or
spilled:
Dike and contain the spill with inert material (sand, earth,
etc.) and transfer liquid and solid diking material to sepa-
rate containers for disposal. Remove contaminated
clothing, and wash affected skin areas with soap and
water. Wash clothing before reuse. Keep the spill out of all
sewers and open bodies of water.
I. Product Information
Clarity ® herbicide is a water-soluble formulation intended
for control and suppression of many annual, biennial, and
perennial broadleaf weeds, as well as woody brush and
vines listed in Table 1. General Weed List, Including
ALS- and Triazine-Resistant Biotypes . Clarity may be
used for control of these weeds in asparagus, corn, cot-
ton, conservation reserve programs, fallow cropland, grass
grown for seed, hay, proso millet, pasture, rangeland, gen-
eral farmstead (noncropland), small grains, sod farms and
farmstead turf, sorghum, soybean, and sugarcane.
Mode of Action
Clarity is readily absorbed by plants through shoot and
root uptake, translocates throughout the plant’s system,
and accumulates in areas of active growth. Clarity inter-
feres with the plant’s growth hormones (auxins) resulting in
death of many broadleaf weeds.
must

5
Table 1. General Weed List, Including ALS- and Triazine-Resistant Biotypes
ANNUALS
Alkanet
Amaranth, Palmer, Powell,
Spiny
Aster, Slender
Bedstraw, Catchweed
Beggarweed, Florida
Broomweed, Common
Buckwheat, Tartary, Wild
Buffalobur
Burclover, California
Burcucumber
Buttercup, Corn, Roughseed
Carpetweed
Catchﬂy, Nightﬂowering
Chamomile, Corn
Chervil, Bur
Chickweed, Common
Clovers
Cockle, Corn, Cow, White
Cocklebur, Common
Copperleaf, Hophornbeam
Cornﬂower (Bachelor Button)
Croton, Tropic, Woolly
Daisy, English
Dragonhead, American
Eveningprimrose, Cutleaf
Falseﬂax, Smallseed
Fleabane, Annual
Flixweed
Fumitory
Goosefoot, Nettleleaf
Hempnettle
Henbit
Jacobs-Ladder
Jimsonweed
Knawel (German Moss)
Knotweed, Prostrate
Kochia
Ladysthumb
Lambsquarters, Common
Lettuce, Miners, Prickly
Mallow, Common, Venice
Marestail (Horseweed)
Mayweed
Morningglory, Ivyleaf, Tall
Mustard, Black, Blue, Tansy,
Treacle, Tumble, Wild,
Yellowtops
Nightshade, Black, Cutleaf,
Pennycress, Field (Fanweed,
Frenchweed, Stinkweed)
Pepperweed, Virginia
(Peppergrass)
Pigweed, Prostrate, Redroot
(Carelessweed), Rough,
Smooth, Tumble
Pineappleweed
Poorjoe
Poppy, Red-horned
Puncturevine
Purslane, Common
Pusley, Florida
Radish, Wild
Ragweed, Common, Giant
(Buffaloweed), Lance-Leaf
Rocket, London, Yellow
Rubberweed, Bitter
(Bitterweed)
Salsify
Senna, Coffee,
Sesbania, Hemp
Shepherdspurse
Sicklepod
Sida, Prickly (Teaweed)
Smartweed, Green,
Pennsylvania
Sneezeweed, Bitter
Sowthistle, Annual, Spiny
Spanish Needles
Spikeweed, Common
Spurge, Prostrate, Leafy
Spurry, Corn
Starbur, Bristly
Starwort, Little
Sumpweed, Rough
Sunﬂower, Common (Wild),
Volunteer
Thistle, Russian
Velvetleaf
Waterhemp
Waterprimrose, Winged
Wormwood
BIENNIALS
Burdock, Common
Carrot, Wild (Queen Anne’s
Lace)
Cockle, White
Eveningprimrose, Common
Geranium, Carolina
Gromwell
Knapweed, Diffuse, Spotted
Mallow, Dwarf
Plantain, Bracted
Ragwort, Tansy
Starthistle, Yellow
Sweetclover
Teasel
Thistle, Bull, Milk, Musk,
Plumeless
PERENNIALS
Alfalfa1
Artichoke, Jerusalem
Aster, Spiny, Whiteheath
Bedstraw, Smooth
Bindweed, Field, Hedge
Blueweed, Texas
Bursage, Woollyleaf
1 (Bur
Ragweed, Povertyweed)
Buttercup, Creeping, Tall,
Western Field
Campion, Bladder
Chickweed, Field, Mouseear
Chicory
1
Clover1, Hop
Dandelion1,
Dock1, Broadleaf (Bitterdock),
Curly
Dogbane, Hemp
Dogfennel
1 (Cypressweed)
Fern, Bracken
Garlic, Wild
Goldenrod, Canada, Missouri
Goldenweed, Common
Hawkweed
Henbane, Black
1
Horsenettle, Carolina
Ironweed
Knapweed, Black, Diffuse,
Russian
1, Spotted
Milkweed, Common,
Honeyvine, Western Whorled
Nettle, Stinging
Nightshade, Silverleaf (White
Horsenettle)
Onion, Wild
Plantain, Broadleaf, Buckhorn
Pokeweed
Ragweed, Western
Redvine
Sericea Lespedeza
Smartweed, Swamp
Snakeweed, Broom
Sorrel
1, Red (Sheep Sorrel)
Sowthistle1, Perennial
Spurge, Leafy
Sundrop,
Thistle, Canada, Scotch
Toadﬂax, Dalmatian
Tropical Soda Apple
Trumpetcreeper (Buckvine)
Vetch
Waterhemlock, Spotted
Waterprimrose, Creeping
Woodsorrel
1, Creeping, Yellow
Wormwood, Louisiana
Yankeeweed
Yarrow, Common
1
WOODY SPECIES
Alder
Ash
Aspen
Basswood
Beech
Birch
Blackberry
2
Blackgum2
Cedar2
Cherry
Chinquapin
Cottonwood
Creosotebush
2
Cucumbertree
Dewberry
2
Dogwood2
Elm
Grape
Hawthorn (Thornapple)
2
Hemlock
Hickory
Honeylocust
Honeysuckle
Hornbeam
Huckleberry
Huisache
Ivy, Poison
Kudzu
Locust, Black
Maple
Mesquite
Oak
Oak, Poison
Olive, Russian
Persimmon, Eastern
Pine
Plum, Sand (Wild Plum)
2
Poplar
Rabbitbrush
Redcedar, Eastern
2
Rose2, McCartney, Multiﬂora
Sagebrush, Fringed2
Sassafras
Serviceberry
Spicebush
Spruce
Sumac
Sweetgum
2
Sycamore
Tarbush
Willow
Witchhazel
Yaupon
2
Yucca2
1 Noted perennials may be controlled using lower rates of Clarity ® herbicide than those recommended for other listed perennial weeds.
2 Growth suppression only.

6
Resistance Management
 Clarity ® herbicide has a low probability of selecting for
resistant weed biotypes.
Cleaning Spray Equipment
Clean application equipment thoroughly by using a strong
detergent or commercial sprayer cleaner, according to the
manufacturer’s directions, and then triple rinsing the equip-
ment before and after applying this product.
II. Application Instructions
 Clarity can be applied to actively growing weeds as aerial,
broadcast, band, or spot spray applications using water or
sprayable fertilizer as a carrier. For general Clarity applica-
tion rates for control or suppression by weed type and
growth stage see Table 2. Clarity Application Rates
for Control or Suppression by Weed Type and
Growth Stage. For crop-speciﬁc application timing and
other details, refer to section VI. Crop-Speciﬁc
Information.
To avoid uneven spray coverage, Clarity should not be
applied during periods of gusty wind or when wind is in
excess of 15 mph.
Avoid off-target movement. Use extreme care when apply-
ing Clarity to prevent injury to desirable plants and
shrubs.
Cultivation
DO NOT cultivate within 7 days after applying Clarity.
Sensitive Crop Precautions
 Clarity may cause injury to desirable trees and plants,
particularly beans, cotton, ﬂowers, fruit trees, grapes,
ornamentals, peas, potatoes, soybeans, sunﬂowers,
tobacco, tomatoes, and other broadleaf plants when con-
tacting their roots, stems, or foliage. These plants are most
sensitive to Clarity during their development or growing
stage.
Precautions to avoid herbicide drift
• Use coarse sprays (volume median diameter of
400 microns or more) to avoid potential herbicide drift.
Select nozzles that are designed to produce minimal
amounts of ﬁne spray particles (less than 200 microns).
Examples of nozzles designed to produce coarse sprays
via ground applications are Delavan
® Raindrops,
 Spraying Systems XR (excluding 110º tips) ﬂat fans,
Turbo Teejets®, Turbo Floodjets®, or large capacity
ﬂood nozzles such as D10, TK10, or greater capacity
tips.
• Keep the spray pressure at or below 20 psi and the
spray volume at or above 20 gallons per acre (for ground
broadcast applications), unless otherwise required by the
manufacturer of drift-reducing nozzles. Consult your
spray nozzle supplier concerning the choice of drift-
reducing nozzles.
• Agriculturally approved drift-reducing additives may be
used.
Aerial Application Methods and Equipment
Water Volume: Use 1 to 10 gallons of water per acre
(2 to 20 gallons of diluted spray per treated acre for pre-
harvest uses). Use the higher spray volume when treating
dense or tall vegetation.
Application Equipment: Select nozzles designed to pro-
duce minimal amounts of ﬁne spray particles. Make aerial
applications at the lowest safe height to reduce exposing
the spray to evaporation and wind.
The applicator must follow the most restrictive use cau-
tions to avoid drift hazards, including those found in this
labeling, as well as state and local regulations and
ordinances.
DO NOT use aerial equipment if spray particles can be
carried by the wind into areas where sensitive crops or
plants are growing or when temperature inversions exist.
Ground Application (Banding)
When applying Clarity by banding, determine the amount
of herbicide and water volume needed using the following
formula:
Bandwidth in inches
x Broadcast rate
per acre = Banding herbicide
rate per acreRow width in inches
Bandwidth in inches
x Broadcast
 volume per acre = Banding water
 volume per acreRow width in inches
Table 2. Clarity Application Rates for Control or Suppression by Weed Type and Growth Stage
Use rate limitations are given in sections V. and VI. Crop-Speciﬁc Information .
Weed Type and Stage Rate Per Acre (ﬂ oz) Weed Type and Stage Rate Per Acre (ﬂ oz)
Annual1
Small, actively growing
Established weed growth

8 to 16
16 to 24
Perennial
Top growth suppression
Top growth control and root suppression
Noted perennials (footnote 1 in Table 1)
Other perennials
3

8 to 16
16 to 32
32
32
Biennial
Rosette diameter 1 to 3"
Rosette diameter 3" or more
Bolting

8 to 16
16 to 32
32
Woody Brush & Vines
Top growth suppression
Top growth control
 2,3
Stems and stem suppression 3

16 to 32
32
32
1 Rates below 8 fluid ounces per acre may provide control or suppression but should typically be applied with other herbicides th at are effective on
the same species and biotype.
2 Species noted in Table 2 will require tank mixes for adequate control.
3 DO NOT broadcast apply more than 32 fluid ounces per acre for single application. Use the higher level of listed rate ranges when tre ating dense
vegetative growth or perennial weeds with well established root growth. “Other perennials” are defined as those listed in Table 1. General Weed
List, Including ALS- and Triazine-Resistant Biotypes without footnote 1. The use on other perennials and on Woody Brush and Vine stems
and for stem suppression is not registered in California.
Rates higher than 32 fluid ounces per acre are for spot treatment only. DO NOT exceed 64 fluid ounces per acre per year.

7
Ground Application (Broadcast)
Water Volume: Use 3 to 50 gallons of spray solution per
broadcast acre for optimal performance. Use the higher
spray volume when treating dense or tall vegetation.
Application Equipment: Select nozzles designed to pro-
duce minimal amounts of ﬁne spray particles. Spray with
nozzles as close to the weeds as is practical for good
weed coverage.
Ground Application (Wipers)
 Clarity
® herbicide may be applied through wiper applica-
tion equipment to control or suppress actively growing
broadleaf weeds, brush, and vines. Use a solution contain-
ing 1 part Clarity to 1 part water. DO NOT apply greater
than 1 lb dicamba acid equivalent (1 quart Clarity herbi-
cide) per acre per application. DO NOT contact desirable
vegetation with herbicide solution. Wiper application may
be made to crops (including pastures) and non-cropland
areas described in this label with the exception of cotton,
sorghum, and soybean.
III. Additives
To improve postemergence weed control, agriculturally
approved surfactants, sprayable fertilizers (urea
 ammonium nitrate, or ammonium sulfate), or crop oil con-
centrate may be added, particularly in dry growing
conditions. (Refer to Table 3. Additive Rate Per Acre .)
Nitrogen Source
• Urea ammonium nitrate (UAN): Use 2 to 4 quarts of
UAN (commonly referred to as 28%, 30%, or 32%
 nitrogen solution) per acre. DO NOT use brass or
 aluminum nozzles when spraying UAN.
• Ammonium sulfate (AMS): AMS at 2.5 pounds per
acre may be substituted for UAN. Use high-quality AMS
(spray grade) to avoid plugging of nozzles. Other sources
of nitrogen are not as effective as those mentioned.
BASF does not recommend applying AMS, if applied in
less than 10 gallons per acre because of potential prob-
lems with precipitation in reduced volumes. Use AMS
only if it has been demonstrated to be successful in local
experience.
Nonionic Surfactant
The standard label recommendation is 1 pint of an 80%
active nonionic spray surfactant per 100 gallons of water.
For certain weeds, a higher spray surfactant rate is
recommended.
Oil Concentrate
A crop oil concentrate must contain either a petroleum or
vegetable oil base and must meet all of the following
criteria:
• be nonphytotoxic,
• contain only EPA-exempt ingredients,
• provide good mixing quality in the jar test, and
• be successful in local experience.
The exact composition of suitable products will vary; how-
ever, vegetable and petroleum oil concentrates should
contain emulsiﬁers to provide good mixing quality. Highly
reﬁned vegetable oils have proven more satisfactory than
unreﬁned vegetable oils. For additional information, see
Compatibility Test for Mix Components .
Adjuvants containing crop oil concentrates may be used in
preplant, preemergence, and preharvest application, as
well as in pastures and noncropland. DO NOT use crop oil
concentrate for postemergence in-crop applications unless
speciﬁcally allowed in section VI. Crop-Speciﬁc
 Information of this label.
Table 3. Additive Rate Per Acre
Additive Rate Per Acre
Nonionic Surfactant 1 to 2 pints per 100 gallons
AMS
UAN Solution
Crop Oil Concentrate
2.5 pounds
2 to 4 quarts
1 quart*
*See manufacturer’s label for speciﬁc rate recommendations
Compatibility Test for Mix Components
Before mixing components, always perform a compatibility
jar test.
For 20 gallons per acre spray volume, use 3.3 cups
(800 ml) of water. For other spray volumes, adjust accord-
ingly. Only use water from the intended source at the
source temperature.
Add components in the sequence indicated in the Mixing
Order using 2 teaspoons for each pound or 1 teaspoon
for each pint of recommended label rate per acre.
Always cap the jar and invert 10 cycles between compo-
nent additions.
When the components have all been added to the jar, let
the solution stand for 15 minutes. Evaluate the solution for
uniformity and stability. The spray solution should not have
free oil on the surface, nor ﬁne particles that precipitate to
the bottom, nor thick (clabbered) texture. If the spray solu-
tion is not compatible, repeat the compatibility test with the
addition of a suitable compatibility agent. If the solution is
then compatible, use the compatibility agent as directed
on its label. If the solution is still incompatible, DO NOT
mix the ingredients in the same tank.
Mixing Order
1) Water. Begin by agitating a thoroughly clean sprayer
tank three-quarters full of clean water.
2) Agitation. Maintain constant agitation throughout mix-
ing and application.
3) Inductor. If an inductor is used, rinse it thoroughly after
each component has been added.
4) Products in PVA bags. Place any product contained
in water-soluble PVA bags into the mixing tank. Wait until
all water-soluble PVA bags have fully dissolved and the
product is evenly mixed in the spray tank before
continuing.
5) Water-dispersible products (dry ﬂowables, wettable
powders, suspension concentrates, or
suspo-emulsions).
6) Water-soluble products. (such as Clarity)

8
7) Emulsiﬁable concentrates (such as oil concentrate
when applicable).
8) Water-soluble additives (such as AMS or UAN when
applicable).
9) Remaining quantity of water.
Maintain constant agitation during application.
IV. Tank Mixing Information
It is the pesticide user’s responsibility to ensure that all
products are registered for the intended use. Read and
follow the applicable restrictions, limitations, and directions
for use on all product labels involved in the tank mixture.
Users must follow the most restrictive directions for use
and precautionary statements of each product in the tank
mixture.
Tank Mix Partners/Components
The herbicide products listed may be applied with Clarity
®
herbicide according to the speciﬁc tank mixing instruc-
tions in this label and respective product labels.
See section VI. Crop-Speciﬁc Information for more
details. Read and follow the applicable Restrictions and
Limitations and Directions For Use on all products
involved in tank mixing. The most restrictive labeling
applies to tank mixes.
Clarity may also be used in tank mixtures with foliar
applied insecticides including synthetic pyrethroids such
as Ambush
®, Asana®, Pounce® and Warrior® insecticides.
DO NOT apply Clarity in tank mixtures with Lorsban®
insecticide.
Physical incompatibility, reduced weed control, or crop
injury may result from mixing Clarity with other pesticides
(fungicides, herbicides, insecticides, or miticides), addi-
tives, or fertilizers. BASF does not recommend using tank
mixes other than those listed on BASF labeling. Local agri-
cultural authorities may be a source of information when
using other than BASF recommended tank mixes.
• Accent
® (nicosulfuron;
EPA Reg. No. 352-747)
• Ally® (metsulfuron-methyl;
EPA Reg. No. 279-9575)
• Asulox® (asulam;
EPA Reg. No. 70506-139)
• Atrazine
• Axiom
® (ﬂufenacet +
metribuzin;
EPA Reg. No. 264-766)
• Banvel
® SGF (dicamba;
EPA Reg. No. 51036-290)
• Basagran® (bentazon;
EPA Reg. No. 7696-45)
• Beacon®
(primisulfuron-methyl;
EPA Reg. No. 10163-376)
• Bicep II Magnum
®
(s-metolachlor + atrazine;
EPA Reg. No. 100-817)
• Bronate
®
(bromoxynil + MCPA;
EPA Reg. No. 264-438)
• Buctril
® (bromoxynil;
EPA Reg. No. 264-437)
• Caparol® (prometryn;
EPA Reg. No. 100-620)
• Crossbow®
(2,4-D + triclopyr;
EPA Reg. No. 62719-260)
• Curtail
® (clopyralid + 2,4-D;
EPA Reg. No. 62719-48)
• Degree Xtra®
(acetochlor + atrazine;
EPA Reg. No. 524-511)
• Dual Magnum
®
(s-metolachlor;
EPA Reg. No. 100-816)
• Dual II Magnum
®
(s-metolachlor + atrazine;
EPA Reg. No. 100-818)
• Eradicane
® (EPTC;
EPA reg. No. 10163-284)
• Evik® (ametryn;
EPA Reg. No. 100-786)
• Express® (thifensulfuron +
tribenuron-methyl;
EPA Reg. No. 279-9578)
• Fallow Master
®
(glyphosate + dicamba;
EPA Reg. No. 105211-83)
• Finesse
® (chlorsulfuron +
metsulfuron-methyl;
EPA Reg. No. 279-9510)
• FulTime
®
(acetochlor + atrazine;
EPA Reg. No. 62719-371)
• Garlon
® (triclopyr;
EPA Reg. No. 62719-37)
• Glean® (chlorsulfuron;
EPA Reg. No. 279-9600)
• Glyphosate
• Harmony
® Extra
(thifensulfuron +
tribenuron-methyl;
EPA Reg. No. 279-9583)
• Harness
® Xtra
(acetochlor + atrazine;
EPA Reg. No. 524-480)
• Hornet
®
(ﬂumetsalam + clopyralid;
EPA Reg. No. 62719-253)
• Kerb
® (pronamide;
EPA Reg. No. 62719-578)
• Landmaster® BW
(glyphosate + 2,4-D;
EPA Reg. No. 105211-68)
• Liberty
® (glufosinate;
EPA Reg. No. 7969-447)
• Liberty ® ULTRA
(glufosinate-p;
EPA Reg. No. 7969-500)
• MCPA
• Outlook
® (dimethenamid-P;
EPA Reg. No. 7969-156)
• Paramount® (quinclorac;
EPA Reg. No. 7969-316)
• Peak® (prosulfuron;
EPA Reg. No. 10163-380)
• Permit® (halosulfuron;
EPA Reg. No. 81880-2)
• Princep® (simazine;
EPA Reg. No. 100-526)
• Prowl® (pendimethalin;
EPA Reg. No. 241-337)
• Prowl® H2O (pendimethalin;
EPA Reg. No. 241-418)
• Python® (ﬂumetsulam;
EPA Reg. No. 5481-677)
• Spirit® (primisulfuron +
prosulfuron;
EPA Reg. No. 10163-381)
• Stinger
® (clopyralid;
EPA Reg. No. 62719-63)
• Surpass® (acetochlor;
EPA Reg. No. 62719-637)
• Surtain ® (pyroxasulfone +
saﬂufenicail;
EPA Reg. No. 7969-501)
• TopNotch
® (acetochlor;
EPA Reg. No. 62719-369)
• Tordon® 22K (picloram;
EPA Reg. No. 62719-6)
• Tough® (pyridate;
EPA Reg. No. 91746-5)
• Zidua® SC (pyroxasulfone;
EPA Reg. No. 7969-374)
• 2,4-D
It is the pesticide user’s responsibility to ensure that all
products are registered for the intended use. Read and
follow the applicable restrictions, limitations, and directions
for use on all product labels involved in the tank mixture.
Users must follow the most restrictive directions for use
and precautionary statements of each product in the tan k
mixture.
• Accent® (nicosulfuron; • Glean® (chlorsulfuron;
EPA Reg. No. 352-747) EPA Reg. No. 279-9600)
• Ally® (metsulfuron-methyl; • Glyphosate
EPA Reg. No. 279-9575) • Harmony® Extra
• Asulox® (asulam; (thifensulfuron +
EPA Reg. No. 70506-139) tribenuron-methyl;
• Atrazine EPA Reg. No. 279-9583)
• Axiom® (ﬂufenacet + • Harness® Xtra
metribuzin; (acetochlor + atrazine;
EPA Reg. No. 264-766) EPA Reg. No. 524-480)
• Banvel SGF® (dicamba; • Hornet®
EPA Reg. No. 51036-290) (ﬂumetsalam + clopyralid;
• Basagran® (bentazon; EPA Reg. No. 62719-253)
EPA Reg. No. 7696-45) • Kerb® (pronamide;
• Beacon® EPA Reg. No. 62719-578)
(primisulfuron-methyl; • Landmaster® BW
EPA Reg. No. 10163-376) (glyphosate + 2,4-D;
• Bicep II Magnum® EPA Reg. No. 105211-68)
(s-metolachlor + atrazine; • Liberty® (glufosinate;
EPA Reg. No. 100-817) EPA Reg. No. 7969-447)
• Bronate® • Liberty ULTRA®
(bromoxynil + MCPA; (glufosinate-p;
EPA Reg. No. 264-438) EPA Reg. No. 7969-500)
• Buctril® (bromoxynil; • MCPA
EPA Reg. No. 264-437) • Outlookk® (dimethenamid-P;
• Caparol® (prometryn; EPA Reg. No. 7969-156)
EPA Reg. No. 100-620) • Paramount® (quinclorac;
• Crossbow® EPA Reg. No. 7969-316)
(2,4-D + triclopyr; • Peak® (prosulfuron;
EPA Reg. No. 62719-260) EPA Reg. No. 10163-380)
• Curtail® (clopyralid + 2,4-D; • Permit® (halosulfuron;
EPA Reg. No. 62719-48) EPA Reg. No. 81880-2)
• Degree Xtra® • Princep® (simazine;
(acetochlor + atrazine; EPA Reg. No. 100-526)
EPA Reg. No. 524-511) • Prowl® (pendimethalin;
• Dual Magnum® EPA Reg. No. 241-337)
(s-metolachlor; • Prowl H2O ®® (pendimethalin;
EPA Reg. No. 100-816) EPA Reg. No. 241-418)
• Dual II Magnum® • Python® (ﬂumetsulam;
(s-metolachlor + atrazine; EPA Reg. No. 5481-677)
EPA Reg. No. 100-818) • Spirit® (primisulfuron +
• Eradicane® (EPTC; prosulfuron;
EPA reg. No. 10163-284) EPA Reg. No. 10163-381)
• Evik® (ametryn; • Stinger® (clopyralid;
EPA Reg. No. 100-786) EPA Reg. No. 62719-63)
• Express® (thifensulfuron + • Surpass® (acetochlor;
tribenuron-methyl; EPA Reg. No. 62719-637)
EPA Reg. No. 279-9578) • Surtain® (pyroxasulfone +
• Fallow Master® saﬂufenicail;
(glyphosate + dicamba; EPA Reg. No. 7969-501)
EPA Reg. No. 105211-83) • TopNotch® (acetochlor;
• Finesse® (chlorsulfuron + EPA Reg. No. 62719-369)
metsulfuron-methyl; • Tordon® 22K (picloram;
EPA Reg. No. 279-9510) EPA Reg. No. 62719-6)
• FulTime® • Tough® (pyridate;
(acetochlor + atrazine; EPA Reg. No. 91746-5)
EPA Reg. No. 62719-371) • Zidua SC® (pyroxasulfone;
• Garlon® (triclopyr; EPA Reg. No. 7969-374)
EPA Reg. No. 62719-37) • 2,4-D

9
V. Restrictions and Limitations
• Maximum seasonal use rate: Refer to Table 4. Crop-Speciﬁc Restrictions and Limitations for crop-speciﬁc
maximum seasonal use rates. DO NOT exceed 64 ﬂuid ounces of Clarity ® herbicide (2 pounds acid equivalent) per
acre, per year.
• Preharvest Interval (PHI): Refer to section VI. Crop-Speciﬁc Information for preharvest intervals.
• Restricted-Entry Interval (REI): 24 hours
• Crop Rotational Restrictions:
The interval between application and planting rotational crop is given below. Always exclude counting days when the
ground is frozen. Planting at intervals less than speciﬁed below may result in crop injury. Moisture is essential for the
degradation of this herbicide in soil. If dry weather prevails, use cultivation to allow herbicide contact with moist soil.
Planting/replanting restrictions for Clarity applications of 24 ﬂuid ounces per acre or less: No rotational
cropping restrictions apply at 120 days or more following application. Additionally, for annual crop uses in this label
including corn, cotton, sorghum, and soybean, follow the preplant use directions in section VI. Crop-Speciﬁc Infor-
mation. For barley, oat, wheat, and other grass seedings, the interval between application and planting is 15 days per
8 ﬂuid ounces per acre applied east of the Mississippi River and 22 days per 8 ﬂuid ounces per acre west of the
 Mississippi River.
Planting/replanting restrictions for applications of more than 24 ﬂuid ounces and up to 64 ﬂuid ounces of
 Clarity per acre: Corn, sorghum, cotton (east of the Rocky Mountains) and all other crops grown in areas with 30" or
more of annual rainfall may be planted 120 days or more after application. Barley, oat, wheat, and other grass seed-
ings, may be planted if the interval from application to planting is 30 days per 16 ﬂuid ounces per acre east of the
Mississippi River and 45 days per 16 ﬂuid ounces per acre west of the Mississippi River. For all other crops in areas
with less than 30" of annual rainfall, the interval between application and planting is 180 days or more.
• Rainfast period: Rainfall or irrigation occurring within 4 hours after postemergence applications may reduce the
effectiveness of Clarity.
• Stress: DO NOT apply to crops under stress due to lack of moisture, hail damage, ﬂooding, herbicide injury, mechani-
cal injury, insects, or widely ﬂuctuating temperatures as injury may result.
• DO NOT apply through any type of irrigation equipment. DO NOT treat irrigation ditches or water used for crop irri-
gation or domestic purposes.

10
Table 4. Crop-Speciﬁc Restrictions and Limitations 1
Crop
Maximum Rate Per
Acre Per Application
(ﬂ oz)
Maximum In-Crop Rate
Per Acre Per Season
(ﬂ oz)
Livestock
Grazing or
Feeding
Aircraft
Application
Allowed
Asparagus 16 16 Yes Yes
Barley , Fall
, Spring
8
8
12
11 Yes Yes
Conservation Reserve
Program (CRP) 32 64 Yes Yes
Corn 16 24 Yes
2 Yes
Cotton 8 8 Yes Yes
Fallow Ground 32 64 Yes Yes
Grass grown for seed 32 64 Yes Yes
Oats 4 4 Yes Yes
Pastureland 32 32 Yes Yes
Proso Millet 4 4 Yes Yes
Small grains grown for
grass, forage, fodder,
hay and/or pasture
16 16 Yes Yes
Sorghum 8 16 Yes Yes
Soybean 32 64 Yes Yes
Sugarcane 32 64 Yes Yes
Triticale 4 4 Yes Yes
Sod farms and
farmstead turf 32 32 Yes Yes
Wheat 8 16 Yes Yes
1Refer to section VI. Crop-Specific Information for more details.
2Once the crop reaches the ensilage (milk) stage or later in maturity.
VI. Crop-Speciﬁc Information
Asparagus
Apply Clarity ® herbicide to emerged and actively growing weeds in 40 to 60 gallons of diluted spray per treated acre
immediately after cutting the ﬁeld, but at least 24 hours before the next cutting. Multiple applications may be made per
growing season.
If spray contacts emerged spears, crooking (twisting) of some spears may result. If such crooking occurs, discard affect-
ed spears.
Rates: Apply 8 to 16 ﬂuid ounces of Clarity per acre to control annual sowthistle, black mustard, Canada and Russian
thistle, and redroot pigweed, (carelessweed).
Apply 16 ﬂuid ounces of Clarity per acre to control common chickweed, ﬁeld bindweed, nettleleaf goosefoot, and wild
radish. Multiple applications may be made per growing season. DO NOT exceed a total of 16 ﬂuid ounces of Clarity per
treated acre, per crop year.

11
DO NOT harvest prior to 24 hours after treatment.
DO NOT use in the Coachella Valley of California.
Asparagus Tank Mixes
Apply 8 to 16 ﬂuid ounces of Clarity ® herbicide per acre
with glyphosate (Roundup® Ultra herbicide) or 2,4-D to
improve control of Canada thistle and ﬁeld bindweed.
Between Crop Applications
PREPLANT DIRECTIONS (POSTHARVEST, FALLOW,
CROP STUBBLE, SET-ASIDE) FOR BROADLEAF
WEED CONTROL:
Clarity can be applied either postharvest in the fall,
spring, or summer during the fallow period or to crop
stubble/set-aside acres. Apply Clarity as a broadcast or
spot treatment to emerged and actively growing weeds
after crop harvest (postharvest) and before a killing frost or
in the fallow cropland or crop stubble the following spring
or summer.
See Crop-Rotational Restrictions in
section V. Restrictions and Limitations for the recom-
mended interval between application and planting to
prevent crop injury.
Rates and Timings:
Apply 4 to 32 ﬂuid ounces of Clarity per acre. Refer to
Table 2 to determine use rates for speciﬁc targeted weed
species. For best performance, apply Clarity when annual
weeds are less than 6" tall, when biennial weeds are in the
rosette stage and to perennial weed regrowth in late sum-
mer or fall following a mowing or tillage treatment. The
most effective control of upright perennial broadleaf weeds
such as Canada thistle and Jerusalem artichoke occurs if
Clarity is applied when the majority of weeds have at least
4 to 6" of regrowth or for weeds such as ﬁeld bindweed
and hedge bindweed that are in or beyond the full bloom
stage.
Avoid disturbing treated areas following application. Treat-
ments may not kill weeds that develop from seed or
underground plant parts such as rhizomes or bulblets,
after the effective period for Clarity. For seedling control, a
follow-up program or other cultural practices could be
instituted. For small grain in-crop uses of Clarity, refer to
the small grain section for details.
Between Crop Tank Mixes
In tank mixes with one or more of the following herbicides,
apply 4 to 16 ﬂuid ounces of Clarity per acre for control of
annual weeds, or 16 to 32 ﬂuid ounces of Clarity per acre
for control of biennial and perennial weeds:
• Ally®
• Atrazine
• Curtail
®
• Fallow Master®
• Finesse®
• glyphosate
• Kerb®
• Landmaster® BW
• Paramount ®
• Tordon® 22K
• 2,4-D
Corn (Field, Pop, Seed, and Silage)
Direct contact of Clarity with corn seed must be avoided.
If corn seeds are less than 1.5" below the soil surface,
delay application until corn has emerged.
Applications of Clarity to corn during periods of rapid
growth may result in temporary leaning. Corn will usually
become erect within 3 to 7 days. Cultivation should be
delayed until after corn is growing normally to avoid
breakage.
Corn may be harvested or grazed for feed once the crop
has reached the ensilage (milk) stage or later in maturity.
Up to 2 applications of Clarity may be made during a
growing season. Sequential applications must be separat-
ed by 2 weeks or more.
DO NOT apply Clarity to seed corn or popcorn without
ﬁrst verifying with your local seed corn company (supplier)
the selectivity of Clarity on your inbred line or variety of
popcorn. This precaution will help avoid potential injury of
sensitive varieties.
Avoid using crop oil concentrates after crop emergence as
crop injury may result. Use crop oil concentrates only in
dry conditions when corn is less than 5" tall and when
applying Clarity alone or tank mixed with atrazine.
Use of sprayable ﬂuid fertilizer as the carrier is not recom-
mended for applications of Clarity made after corn
emergence.
Clarity is not registered for use on sweet corn.
PREPLANT AND PREEMERGENCE APPLICATION IN
NO TILLAGE CORN:
Rates: Apply 16 ﬂuid ounces of Clarity per acre on
medium- or ﬁne-textured soils containing 2.5% or greater
organic matter. Use 8 ﬂuid ounces of Clarity per acre on
coarse soils (sand, loamy sand, and sandy loam) or
medium- and ﬁne-textured soils with less than 2.5%
organic matter.
Timing: Clarity can be applied to emerged weeds before,
during, or after planting a corn crop. When planting into a
legume sod (e.g. alfalfa or clover), apply Clarity after 4 to
6" of regrowth has occurred.
• Ally® • Kerb®
• Atrazine • Landmaster® BW
• Curtail® • Paramount ®
• Fallow Master® • Tordon® 22K
• Finesse® • 2,4-D
• glyphosate

12
PREEMERGENCE APPLICATION IN CONVENTIONAL
OR REDUCED TILLAGE CORN:
Rates: Apply 16 ﬂuid ounces of Clarity
® herbicide per
treated acre to medium- or ﬁne-textured soils that contain
2.5% organic matter or more. DO NOT apply to coarse-
textured soils (sand, loamy sand, or sandy loam) or
any soil with less than 2.5% organic matter until after corn
emergence (see Early Postemergence uses below).
Timing: Clarity may be applied after planting and prior to
corn emergence. Preemergence application of Clarity
does not require mechanical incorporation to become
active. A shallow mechanical incorporation is recommend-
ed if the application is not followed by adequate rainfall or
sprinkler irrigation. Avoid tillage equipment (e.g. drags, har-
rows) that concentrate treated soil over seed furrow, as
seed damage could result.
Preemergence control of cocklebur, jimsonweed, and vel-
vetleaf may be reduced if conditions such as low
temperature or lack of soil moisture cause delayed or deep
germination of weeds.
EARLY POSTEMERGENCE APPLICATION IN ALL
TILLAGE SYSTEMS:
Rates: Apply 16 ﬂuid ounces of Clarity per treated acre.
Reduce the rate to 8 ﬂuid ounces of Clarity per treated
acre for corn grown on coarse-textured soils (sand, loamy
sand, and sandy loam).
Timing: Apply between corn emergence and the 5-leaf
stage or 8" tall, whichever occurs ﬁrst. Refer to Late
Postemergence Application if the sixth true leaf is
emerging from whorl or the corn is greater than 8" tall.
LATE POSTEMERGENCE APPLICATION:
Rate: Apply 8 ﬂuid ounces of Clarity per treated acre.
Timing: Apply Clarity from 8 to 36" tall corn or 15 days
before tassel emergence, whichever comes ﬁrst. For best
performance, apply when weeds are less than 3" tall.
Apply directed spray when corn leaves prevent proper
spray coverage, sensitive crops are growing nearby, or
tank mixing with 2,4-D. DO NOT apply Clarity when soy-
beans are growing nearby if any of these conditions exist:
• corn is more than 24" tall
• soybean are more than 10" tall
• soybean have begun to bloom
Corn Tank Mixes or Sequential Uses
When using tank mix or sequential applications with
Clarity, always follow the companion product label to
determine speciﬁc use rates by soil types, weed species,
and weed or crop growth stage. In addition, follow precau-
tions and restrictions including state and local use
restrictions that may apply to speciﬁc products.
Apply Clarity prior to, in tank mix with, or after one or
more of the following herbicides:
• Accent® 1
• Atrazine
• Axiom
®
• Banvel® 1
• Beacon® 1
• Bicep®
• Degree Xtra®
• Dual Magnum®
• Dual II Magnum®
• Eradicane®
• FulTime®
• Glyphosate4
• Harness® Xtra
• Hornet® 1
• Liberty ® 3
• Liberty Ultra 3
• Marksman ® 1
• Outlook®
• Permit® 1
• Princep®
• Prowl®
• Python®
• Spirit® 1
• Stinger® 1
• Surpass®
• TopNotch®
• Tough®
• 2,4-D 1
1 See Table 5. Specific Guidelines for Tank Mixes or Sequential
Use Programs for additional limitations or restrictions that apply for
tank mix or sequential use programs with these products.
2 Sequential use only.
3 Use only on LibertyLink ® (glufosinate tolerant) corn hybrids.
4 Includes postemergence use on Roundup Ready ® (glyphosate tolerant)
corn hybrids.
• Accent Liberty® 1 • ® 3
• Atrazine • Liberty Ultr a3
• Axiom® • Marksman® 1
• Banvel® 1 • Outlook®
• Beacon® 1 • Permit® 1
• Bicep® • Princep®
• Degree Xtra® • Prowl®
• Dual Magnum® • Python®
• Dual II Magnum® • Spirit® 1
• Eradicane® • Stinger® 1
• FulTime® • Surpass®
• Glyphosate4 • TopNotch®
• Harness® Xtra • Tough®
• Hornet® 1 • 2,4-D 1

13
Table 5. Speciﬁc Guidelines for Tank Mixes or
Sequential Use Programs
Tank Mix Partner Rate Per Acre
Accent® or
Beacon®
When tank mixing, applications
immediately following extreme day or
night temperature ﬂuctuations or
applications when daytime tempera-
tures DO NOT exceed 50º F may
result in decreased weed control or
crop injury. Delay application until the
temperatures warm and both weeds
and crop resume normal growth.
2,4-D
To provide maximum crop safety after
corn emergence, use this tank mix
only after corn is greater than 8" tall
and when application can be made
with drop pipes that direct spray
beneath corn leaves and away from
the whorl of the corn. The maximum
rate of 2,4-D recommended in this
tank mix is 0.25 pints per acre
(0.125 pounds of acid equivalent per
acre).
Banvel® herbicide
Tank mixes with these products that
contain dicamba must not exceed a
total combined rate of 0.50 pounds of
dicamba acid equivalent per acre
(0.25 pound on coarse-textured soils
or on any soil when corn is greater
than 8" tall). Sequential applications
of these products must be separated
by a minimum of 2 weeks (unless the
combined rate is less than
0.5 pounds of dicamba acid equiva-
lent and corn is 8" tall or less) and
must not exceed a combined total of
0.75 pounds dicamba acid equivalent
per acre for in-crop use.
Spirit®, Stinger®,
Hornet®, or Permit®
For improved control of velvetleaf,
tank mix 0.5 ounce of Spirit or 0.17 to
0.33 ounce Permit per acre with
Clarity ® herbicide. For improved
control of Canada thistle, Stinger at
1.5 to 3 ﬂuid ounces per acre or
Hornet at 0.6 to 1.2 ounces per acre
may be tank mixed with Clarity. Use
the higher rate in the range for heavier
infestations of these weeds.
Cotton
PREPLANT APPLICATION:
Apply up to 8 ﬂuid ounces of Clarity per acre to control
emerged broadleaf weeds prior to planting cotton in con-
ventional or conservation tillage systems.
For best performance, apply Clarity when weeds are in
the 2 to 4 leaf stage and rosettes are less than 2" across.
Following application of Clarity and a minimum accumula-
tion of 1" of rainfall or overhead irrigation, a waiting interval
of 21 days is required per 8 ﬂuid ounces per acre or less.
These intervals must be observed prior to planting cotton.
DO NOT apply preplant to cotton west of the Rockies.
DO NOT make Clarity preplant applications to cotton in
geographic areas with average annual rainfall less than 25".
If applying a spring preplant treatment following application
of a fall preplant (postharvest) treatment, then the combi-
nation of both treatments may not exceed 2 pounds acid
equivalent (64 ﬂuid ounces) per acre.
Cotton Tank Mixes
For control of grasses or additional broadleaf weeds,
Clarity may be tank mixed with Caparol
® and
glyphosate herbicides.
Grass Grown for Seed
Apply 8 to 16 ﬂuid ounces of Clarity per treated acre on
seedling grass after the crop reaches the 3 to 5 leaf stage.
Apply up to 32 ﬂuid ounces of Clarity per acre on well-
established perennial grass. Fo r best performance, apply
Clarity when weeds are in the 2 to 4 leaf stage and
rosettes are less than 2" across. Use the higher level of
listed rate ranges when treating more mature weeds or
dense vegetative growth.
To suppress annual grasses such as brome (downy and
ripgut), rattail fescue, and windgrass, apply up to 32 ﬂuid
ounces of Clarity per treated acre in the fall or late sum-
mer after harvest and burning of established grass seed
crops. Applications should be made immediately following
the ﬁrst irrigation when the soil is moist and before weeds
have more than 2 leaves.
DO NOT apply Clarity after the grass seed crop begins to
joint.
Refer to the Pasture, Hay, Rangeland, and General
Farmstead section for grazing and feeding restrictions.
Grass Seed Tank Mixes
Clarity may be applied in tank mixes with one or more of
the following herbicides:
•Buctril®
•Curtail®
•Express®
•MCPA amine
•Stinger®
•2,4-D amine or ester
Caparol® and
glyphosate herbicides.
Banvel herbicide®
For improved control of velvetleaf,
tank mix 0.5 ounce of Spirit or 0.17 to
0.33 ounce Permit per acre with
Clarity herbicide.® For improved
Spirit®®, Stinger®®, control of Canada thistle, Stinger at
Hornet®®, or Permit® 1.5 to 3 ﬂuid ounces per acre or
Hornet at 0.6 to 1.2 ounces per acre
may be tank mixed with Clarity. Use
the higher rate in the range for heavier
infestations of these weeds.
•Buctril®
•Curtail®
•Express®
•MCPA amine
•Stinger®
•2,4-D amine or ester

14
Proso Millet
For use only within Colorado, Nebraska,
North Dakota, South Dakota, and Wyoming.
 Clarity ® herbicide combined with 2,4-D will provide con-
trol or suppression of the annual broadleaf weeds listed in
Table 1.
Apply 4 ounces of Clarity per treated acre with
0.375 pounds a.i. of 2,4-D. Apply the tank mix of Clarity +
2,4-D as a broadcast or spot treatment to emerged and
actively growing weeds and when proso millet is in the
2 to 5 leaf stage. Use directions for 2,4-D products vary
with manufacturers. Refer to a 2,4-D product with labeling
consistent with the crop stage timing for Clarity. Some
types of proso millet may be affected adversely by a tank
mix of Clarity + 2,4-D.
DO NOT apply unless possible proso millet crop injury will
be acceptable.
Restrictions for proso millet that is grazed or cut for hay
are indicated in Table 6. Timing Restrictions for
 Lactating Dairy Animals Following Treatment in
 Pasture, Hay, Rangeland, and General Farmstead
section of this label.
Pasture, Hay, Rangeland, and
General Farmstead (noncropland)
 Clarity is recommended for use on pasture, hay, range-
land, and general farmstead (non-cropland) (including
fencerows and non-irrigation ditchbanks) for control or
suppression of broadleaf weed and brush species listed in
Table 1.
 Clarity may also be applied to non-cropland areas to con-
trol broadleaf weeds in noxious weed control programs,
districts, or areas including broadcast or spot treatment of
roadsides and highways, utilities, railroad, and pipeline
rights-of-way. Noxious weeds must be recognized at the
state level, but programs may be administered at state,
county, or other level.
 Clarity uses described in this section also pertain to
grasses and small grains (forage, sorghum, rye, sudan-
grass, or wheat) grown for grass, forage, fodder, hay and/
or pasture only. Grasses and small grains not grown for
grass, forage, fodder, hay and/or pasture must comply
with crop-speciﬁc uses in this label. Some perennial
weeds may be controlled with lower rates of either Clarity
or Clarity plus 2,4-D (refer to Table 2).
Rates and Timings
Refer to Table 2 for rate selection based on targeted weed
or brush species. Some weed species will require tank
mixes for adequate control.
Rates above 32 ﬂuid ounces of Clarity per acre are for
spot treatments only. DO NOT broadcast apply more than
32 ﬂuid ounces per acre.
Retreatments may be made as needed; however, DO NOT
exceed a total of 32 ﬂuid ounces of Clarity per treated
acre during a growing season.
Grass grown for hay requires a 7-day wait period between
application and harvest.
Crop-Speciﬁc Restrictions and Limitations
DO NOT apply more than 16 ﬂuid ounces of Clarity per
acre to small grains grown for pasture.
Newly seeded areas may be severely injured if more than
16 ﬂuid ounces of Clarity is applied per acre.
Established grass crops growing under stress can exhibit
various injury symptoms that may be more pronounced if
herbicides are applied. Bentgrass, carpetgrass,
 buffalograss, and St. Augustinegrass may be injured if
more than 16 ﬂuid ounces of Clarity is applied per acre.
Usually colonial bentgrasses are more tolerant than creep-
ing types. Velvetgrasses are most easily injured.
Treatments will kill or injure alfalfa, clovers, lespedeza, wild
winter peas, vetch, and other legumes.
Table 6 lists the timing restrictions for grazing or harvest-
ing hay from treated ﬁelds. There are no grazing
restrictions for animals other than lactating dairy animals.
Table 6. Timing Restrictions for Lactating Dairy
Animals Following Treatment
 Clarity Rate per
Treated Acre
(ﬂ ozs)
Days Before
Grazing
(days)
Days Before Hay
Harvest
(days)
16
32
64
7
21
40
37
51
70
 Clarity can be applied using water, oil in water emulsions
including invert systems, or sprayable ﬂuid fertilizer as a
carrier (refer to the Compatibility Test for Mix
Components).
To prepare oil in water emulsions, half-ﬁll spray tank with
water, then add the appropriate amount of emulsiﬁer. With
continuous agitation, slowly add the herbicide and then the
oil (such as diesel oil or fuel oil) or a premix of oil plus addi-
tional emulsiﬁer to spray tank. Complete ﬁlling of spray
tank with water. Maintain vigorous agitation during spray
operation to prevent oil and water from forming separate
layers. Clarity may be applied broadcast using either
ground or aerial application equipment.
Aerial Application:
• Spray Volume: Use 2 to 40 gallons of diluted spray
per treated acre in a water-based carrier.
Ground Application:
• Spray Volume: Use 3 to 600 gallons of diluted spray
per treated acre. The volume of spray applied will
depend on the height, density, and type of weeds or
brush being treated and on the type of equipment
being used.
• Spot Treatments: Clarity may be applied to individu-
al clumps or small areas of undesirable vegetation

15
using handgun or similar types of application equip-
ment. Apply diluted sprays to allow complete wetting
(up to runoff) of foliage and stems.
Cut Surface Treatments:
Clarity
® herbicide may be applied as a cut surface treat-
ment for control of unwanted trees and prevention of
sprouts of cut trees.
Rate: Mix 1 part Clarity with 1 to 3 parts water to create
the application solution. Use the lower dilution rate when
treating difﬁcult-to-control species.
• For Frill or Girdle Treatments: Make a continuous
cut or a series of overlapping cuts using an axe to gir-
dle tree trunk. Spray or paint the cut surface with the
solution.
• For Stump Treatments: Spray or paint freshly cut
surface with the water mix. The area adjacent to the
bark should be thoroughly wet.
Note: For more rapid foliar effects, 2,4-D may be added to
the solution.
Applications For Control of Dormant Multiﬂora
Rose:
Clarity can be applied when plants are dormant as an
undiluted spot treatment directly to the soil or as a Lo-Oil
basal bark treatment using an oil-water emulsion solution.
• Spot treatments: Spot treatment applications of
Clarity should be applied directly to the soil as close
as possible to the root crown but within 6 to 8" of the
crown. On sloping terrain, apply Clarity to the uphill
side of the crown. DO NOT apply when snow or water
prevents applying Clarity directly to the soil. The use
rate of Clarity depends on the canopy diameter of the
multiﬂora rose.
Examples: Use 0.25, 1.0, or 2.35 ﬂuid ounces of
Clarity respectively, for 5, 10, or 15 feet canopy
diameters.
• Lo-Oil basal bark treatments: For Lo-Oil basal bark
treatments, apply Clarity to the basal stem region
from the ground line to a height of 12 to 18". Spray until
runoff, with special emphasis on covering the root
crown. For best results, apply Clarity when plants are
dormant. DO NOT apply after bud break or when
plants are showing signs of active growth. DO NOT
apply when snow or water prevents applying Clarity
to the ground line.
To prepare approximately 2 gallons of a Lo-Oil spray
solution:
1) Combine 1.5 gallons of water, 1 ounce of emulsiﬁer,
16 ﬂuid ounces of Clarity, and 2.5 pints of No. 2 diesel
fuel.
2) Adjust the amounts of materials used proportionately to
the amount of ﬁnal spray solution desired.
DO NOT exceed 8 gallons of spray solution mix applied
per acre, per year.
Pasture Tank Mixes
Clarity may be applied in tank mixes with one or more of
the following herbicides:
• Ally®
• Crossbow®
• Curtail®
• Garlon®
• Glyphosate
• Stinger
®
• Tordon® 22K
• 2,4-D
Conservation Reserve Program (CRP)
Clarity is recommended for use on both newly seeded
and established grasses grown in Conservation Reserve
or federal Set-Aside Programs. Treatments of Clarity will
injure or may kill alfalfa, clovers, lespedeza, wild winter
peas, vetch, and other legumes.
NEWLY SEEDED AREAS
Clarity may be applied either preplant or postemergence
to newly seeded grasses or small grains such as barley,
oats, rye, sudangrass, wheat, or other grain species grown
as a cover crop. Postemergence applications may be
made after seedling grasses exceed the 3-leaf stage.
Rates of Clarity greater than 16 ﬂuid ounces per treated
acre may severely injure newly seeded grasses.
Preplant applications may injure new seedings if the inter-
val between application and grass planting is less than
45 days per 16 ﬂuid ounces of Clarity applied per treated
acre west of the Mississippi River or 20 days per 16 ﬂuid
ounces applied east of the Mississippi River.
ESTABLISHED GRASS STANDS
Established grass stands are perennial grasses planted
one or more seasons prior to treatment. Certain species
(bentgrass, carpetgrass, smooth brome, buffalograss, or
St. Augustinegrass) may be injured when treated with
more than 16 ﬂuid ounces of Clarity per treated acre.
When applied at recommended rates, Clarity will control
many annual and biennial weeds and provide control or
suppression of many perennial weeds.
Rates and Timings
Apply 4 to 32 ﬂuid ounces of Clarity per acre. Refer to
Table 2 for rates based on target weed species. Clarity
may be tank mixed or applied sequentially with other prod-
ucts labeled for use in Conservation Reserve Programs
such as atrazine, glyphosate, or 2,4-D.
Retreatments may be made as needed; however, DO NOT
exceed a total of 64 ﬂuid ounces (4 pints) of Clarity per
acre per year.
Small Grains not underseeded to legumes
(fall- and spring-seeded barley,
oat, triticale and wheat)
Clarity combinations with listed tank mix partners will pro-
vide control or suppression of the annual broadleaf weeds
listed in Table 1. For improved control of listed weeds,
• Ally® • Glyphosate
• Crossbow® • Stinger®
• Curtail® • Tordon® 22K
• Garlon® • 2,4-D
atrazine, glyphosate, or 2,4-D.

16
tank mix Clarity ® herbicide with one or more of the her-
bicides listed. Clarity used in a tank mix with other
herbicides offers the best spectrum of weed control and
herbicide tolerant or resistant weed management. Refer to
the speciﬁc crop section for Clarity application rate and
timing.
For applications prior to weed emergence or when
sulfonylurea-resistant weeds are present or suspected,
tank mix a minimum of 3 ﬂuid ounces of Clarity per treat-
ed acre with a non-sulfonylurea herbicide such as 2,4-D or
MCPA. Tank mixing Clarity with these products will offer
more consistent control of sulfonylurea-resistant weeds.
Additives: When tank mixing Clarity with sulfonylurea
herbicides (Ally
®, Express®, Finesse®, Glean®,
Harmony® Extra, and Peak®), use 1 to 4 pints of an agri-
culturally approved surfactant (containing at least 80%
active ingredient) per 100 gallons of spray or not more than
0.25 to 0.5% by volume. Use the highest rate of surfactant
when using the lower rate ranges of the tank mix or when
treating more mature and difﬁcult to control weeds or
dense vegetative growth.
Refer to the speciﬁc crop sections below for use rates.
When treating difﬁcult to control weeds such as kochia,
wild buckwheat, cow cockle, prostrate knotweed, Russian
thistle, and prickly lettuce or when dense vegetative
growth occurs, use the 3 to 4 ﬂuid ounces of Clarity per
acre.
Timings: Apply Clarity before, during, or after planting
small grains. See speciﬁc small grain crop uses below for
maximum crop stage. For best performance, apply
Clarity when weeds are in the 2 to 3 leaf stage and
rosettes are less than 2" across. Applying Clarity to small
grains during periods of rapid growth may result in crop
leaning. This condition is temporary and will not reduce
crop yields.
Applications to small grains may be made with aerial appli-
cations with 1 gallon of water or more per acre. Where
dense foliage is present, 2 to 3 gallons of water per acre
should be used.
Restrictions for small grain areas that are grazed or cut for
hay are indicated in Table 6 in Pasture, Hay,
Rangeland, and General Farmstead section of this
label.
Small Grains: Barley
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to fall-
seeded barley prior to the jointing stage. Apply 2 to 3 ﬂuid
ounces of Clarity per acre before spring-seeded barley
exceeds the 4-leaf stage.
Note: For spring barley varieties that are seeded during
the winter months or later, follow the rates and timings
given for spring-seeded barley.
DO NOT tank mix Clarity with 2,4-D in early season
applications on spring-seeded barley.
PREHARVEST APPLICATIONS:
Clarity can be used to control weeds that may interfere
with harvest of fall- and spring-seeded barley. Apply 8 ﬂuid
ounces of Clarity per acre as a broadcast or spot treat-
ment to annual broadleaf weeds when barley is in the hard
dough stage and the green color is gone from the nodes
(joints) of the stem. Best results will be obtained if applica-
tion can be made when weeds are actively growing, but
before weeds canopy.
A waiting interval of 7 days is required before harvest.
DO NOT use preharvest-treated barley for seed unless a
germination test is performed on the seed with an accept-
able result of 95% germination or better.
For control of additional broadleaf weeds or grasses,
Clarity may be tank mixed with other herbicides, such as
2,4-D, that are labeled for preharvest uses in barley.
DO NOT make preharvest applications in California.
Barley Tank Mixes
Table 7.
Tank Mix Partner Rate Per Acre
Ally® 0.05 to 0.1 ounce1
Bronate® 0.75 to 1.5 pints
Buctril® 1 to 1.5 pints
Express® 0.083 to 0.167 ounce1
Finesse® 0.167 to 0.33 ounce1
Glean® 0.167 ounce1
Harmony® Extra 0.167 to 0.33 ounce 1
MCPA amine or ester 8 to 12 ﬂuid ounces2
(0.25 to 0.375 pound a.e.)
Metribuzin 0.125 to 0.47 pound a.i.
2,4-D amine or ester2,3 8 ﬂuid ounces
(0.25 pound a.e.)
1 DO NOT use low rates of sulfonylureas (Ally, Express,
Finesse, Glean, and Harmony Extra) on more mature weeds
or on dense vegetative growth.
2 When using formulations other than 4 pounds per gallon use
pounds of a.e. per acre listed.
3 This tank mix is for fall-seeded barley only
Small Grains: Oat
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 2 to 4 ﬂuid ounces of Clarity per acre to fall-seeded
oat prior to the jointing stage. Apply 2 to 4 ﬂuid ounces of
Clarity per acre before spring-seeded oat exceeds the
5-leaf stage.
A waiting interval of 7 days is required before harvest.
 (Ally®®, Express®®, Finesse®®, Glean®®,
Harmony® Extra, and Peak®)),
1 (Ally, Express,
Finesse, Glean, and Harmony Extra )

17
Clarity ® herbicide may be tank mixed with MCPA amine
or ester for applications in oat.
DO NOT tank mix Clarity with 2,4-D in oat.
Small Grains: Triticale
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to trit-
icale. Early season applications to fall-seeded triticale must
be made prior to the jointing stage.
Early season applications to spring-seeded triticale must
be made before triticale reaches the 6-leaf stage.
Triticale Tank Mixes: For best performance, Clarity
should be used in tank mix combination with bromoxynil
(Buctril, Moxy
® 2E) herbicide.
Small Grains: Wheat
(fall- and spring-seeded)
EARLY SEASON APPLICATIONS:
Apply 2 to 4 ﬂuid ounces of Clarity per treated acre to
wheat unless using one of the fall-seeded wheat speciﬁc
programs below. Early season applications to fall-seeded
wheat must be made prior to the jointing stage.
Early season applications to spring-seeded wheat must be
made before wheat exceeds the 6-leaf stage.
Early developing wheat varieties such as TAM 107 ,
Madison, or Wakeﬁeld must receive application between
early tillering and the jointing stage. Care should be taken
in staging these varieties to be certain that the application
occurs prior to the jointing stage.
To improve control of Russian thistle, ﬂixweed, gromwell,
or mayweed, add 2,4-D amine or ester to a tank mix with
one of the following herbicides: Ally
®, Express®, Finesse®,
Glean®, Harmony® Extra, or Peak®.
SPECIFIC USE PROGRAMS FOR FALL-SEEDED
WHEAT ONLY:
Clarity may be used at 6 ﬂuid ounces on fall-seeded
wheat in Western Oregon as a spring application only. In
Colorado, Kansas, New Mexico, Oklahoma, and Texas, up
to 8 ﬂuid ounces of Clarity may be applied on fall-seeded
wheat after it exceeds the 3-leaf stage for suppression of
perennial weeds, such as ﬁeld bindweed. Applications may
be made in the fall following a frost but before a killing
freeze. Clarity may be tank mixed with 2,4-D amine at
8 ﬂuid ounces after wheat begins to tiller. Periods of
extended stress such as cold and wet weather may
enhance the possibility of crop injury. For fall applications
only, DO NOT use if the potential for crop injury is not
acceptable.
PREHARVEST APPLICATIONS:
Clarity can be used to control weeds that may interfere
with harvest of wheat. Apply 8 ﬂuid ounces Clarity per
acre as a broadcast or spot treatment to annual broadleaf
weeds when wheat is in the hard dough stage and the
green color is gone from the nodes (joints) of the stem.
Best results will be obtained if application can be made
when weeds are actively growing but before weeds
canopy.
A waiting interval of 7 days is required before harvest.
DO NOT use preharvest-treated wheat for seed unless a
germination test is performed on the seed with an accept-
able result of 95% germination or better.
For control of additional broadleaf weeds or grasses,
Clarity may be tank mixed with other herbicides such as
Ally, Roundup
® Ultra, and 2,4-D.
DO NOT make preharvest applications in California.
Wheat Tank Mixes
Table 8.
Tank Mix Partner Rate Per Acre
Ally® 0.05 to 0.1 ounce1
Bronate® 0.75 to 1.5 pints
Buctril® 1 to 1.5 pints
Curtail® 2 to 2.67 pints
Express® 0.083 to 0.167 ounce1
Finesse® 0.167 to 0.33 ounce1
Glean® 0.167 ounce1
Harmony® Extra 0.167 to 0.33 ounce 1
Glyphosate3 12 to 16 ﬂuid ounces
MCPA amine or ester4 8 to 12 ﬂuid ounces
(0.25 to 0.375 pound a.e.)
Metribuzin2 0.25 to 0.375 pound a.i.
Peak® 1 0.25 to 0.38 ounce
Stinger® 4 to 5.33 ﬂuid ounces
2,4-D amine or ester5 8 to 12 ﬂuid ounces
(0.25 to 0.375 pound a.e.)
1 DO NOT use low rates of sulfonylurea herbicides, such as
Ally, Express, Finesse, Glean, Harmony Extra, and Peak on
more mature weeds or on dense vegetative growth.
2 Tank mixes with metribuzin are for use in fall-seeded wheat
only.
3 A tank mix of up to 4 ﬂuid ounces of Clarity with any glyphosate
formulation labeled for use as a preplant application to small
grains may be applied with no waiting period prior to planting.
4 Up to 32 ﬂuid ounces of (1.0 pound a.e.) may be used on
fall-seeded wheat if crop injury is acceptable. When using
formulations other than 4 pounds per gallon, use the pounds
of a.e. per acre listed.
Ally® 0.05 to 0.1 ounce1
Bronate® 0.75 to 1.5 pints
Buctril® 1 to 1.5 pints
Curtail® 2 to 2.67 pints
Express® 0.083 to 0.167 ounce1
Finesse® 0.167 to 0.33 ounce1
Glean® 0.167 ounce1
Harmony® Extra 0.167 to 0.33 ounce1
Glyphosate3 12 to 16 ﬂuid ounces
8 to 12 ﬂuid ouncesMCPA amine or ester4rr (0.25 to 0.375 pound a.e.)
Metribuzin2 0.25 to 0.375 pound a.i.
Peak® 1 0.25 to 0.38 ounce
Stinger® 4 to 5.33 ﬂuid ounces
8 to 12 ﬂuid ounces2,4-D amine or ester5
(0.25 to 0.375 pound a.e.)
Ally, Express, Finesse, Glean, Harmony Extra, and Pea k

18
Sorghum
Clarity ® herbicide may be applied preplant, postemer-
gence, or preharvest in sorghum to control many annual
broadleaf weeds and to reduce competition from estab-
lished perennial broadleaf weeds, as well as control their
seedlings.
DO NOT graze or feed treated sorghum forage or silage
prior to mature grain stage. If sorghum is grown for pasture
or hay, refer to Pasture, Hay, Rangeland, and General
Farmstead section of this label for speciﬁc grazing and
feeding restrictions.
DO NOT apply Clarity to sorghum grown for seed
production.
PREPLANT APPLICATION:
Up to 8 ﬂuid ounces of Clarity may be applied per acre if
applied at least 15 days before sorghum planting.
POSTEMERGENCE APPLICATION:
Up to 8 ﬂuid ounces of Clarity per acre may be applied
after sorghum is in the spike stage (all sorghum emerged)
but before sorghum is 15" tall. For best performance, apply
Clarity when the sorghum crop is in the 3 to 5 leaf stage
and weeds are small (less than 3" tall). Use drop pipes
(drop nozzles) if sorghum is taller than 8". Keep the spray
off the sorghum leaves and out of the whorl to reduce the
likelihood of crop injury and to improve spray coverage of
weed foliage. Applying Clarity to sorghum during periods
of rapid growth may result in temporary leaning of plants
or rolling of leaves. These effects are usually outgrown
within 10 to 14 days.
Delay harvest until 30 days after treatment.
Preharvest uses in Texas and Oklahoma only: Up to
8 ﬂuid ounces of Clarity per acre may be applied for weed
suppression any time after the sorghum has reached the
soft dough stage. An agriculturally approved surfactant
may be used to improve performance. For aerial applica-
tions, use at least 2 gallons of water-based carrier per
treated acre. Delay harvest until 30 days after a preharvest
treatment.
SPLIT APPLICATION:
Clarity may be applied in split applications: preplant fol-
lowed by postemergence or preharvest; or postemergence
followed by preharvest. DO NOT exceed 8 ﬂuid ounces
per acre, per application or a total of 16 ounces per acre,
per season.
Sorghum Tank Mixes and
Sequential Treatments
Clarity may be applied prior to, in a tank mix with, or after
one or more of the following herbicides:
• Atrazine
• Basagran
®
• Bicep II Magnum®
• Buctril®
• Dual Magnum®
• Dual II Magnum®
• Fallow Master®
• Glyphosate
• Landmaster®
• Outlook®
• Paramount ®
• Peak®
• Permit®
Soybean
PREPLANT APPLICATIONS:
Apply 4 to 16 ﬂuid ounces of Clarity per acre to control
emerged broadleaf weeds prior to planting soybeans.
DO NOT exceed 16 ﬂuid ounces of Clarity per acre in a
spring application prior to planting soybeans.
Following application of Clarity and a minimum accumula-
tion of 1" rainfall or overhead irrigation, a waiting interval of
14 days is required for 8 ﬂuid ounces per acre or less, and
28 days for 16 ﬂuid ounces per acre. These intervals must
be observed prior to planting soybeans or crop injury may
occur.
DO NOT make Clarity preplant applications to soybeans
in geographic areas with average annual rainfall less than
25".
PREHARVEST APPLICATIONS:
Clarity can be used to control many annual and perennial
broadleaf weeds and control or suppress many biennial
and perennial broadleaf weeds in soybean prior to harvest
(refer to Table 1). Apply 8 to 32 ﬂuid ounces of Clarity per
acre as a broadcast or spot treatment to emerged and
actively growing weeds after soybean pods have reached
mature brown color and at least 75% leaf drop has
occurred.
DO NOT harvest soybeans until 7 days after application.
Treatments may not kill weeds that develop from seed or
underground plant parts, such as rhizomes or bulblets,
after the effective period for Clarity. For seedling control, a
follow-up program or other cultural practice could be
instituted.
DO NOT use preharvest-treated soybean for seed unless
a germination test is performed on the seed with an
acceptable result of 95% germination or better.
DO NOT feed soybean fodder or hay following a prehar-
vest application of Clarity.
DO NOT make preharvest applications in California.
• Atrazine • Glyphosate
• Basagran ® • Landmaster®
• Bicep II Magnum® • Outlook®
• Buctril® • Paramount®
• Dual Magnum® • Peak®
• Dual II Magnum® • Permit®
• Fallow Master®

19
Soybean Tank Mixes
PREPLANT TANK MIXES:
Clarity ® herbicide may be tank mixed with other herbi-
cides registered for early preplant use in soybeans
including burndown herbicides such as glyphosate and
2,4-D or residual herbicides such as Outlook
® or Dual
Magnum®.
PREHARVEST TANK MIXES:
Clarity may be tank mixed with other herbicides regis-
tered for preharvest use in soybeans such as glyphosate.
Sugarcane
Apply Clarity for control of annual, biennial, or perennial
broadleaf weeds listed in Table 1. Apply 8 to 24 ﬂuid
ounces of Clarity per acre for control of annual weeds,
16 to 32 ﬂuid ounces for control of biennial weeds and for
control or suppression of perennial weeds.
Use the higher level of listed rate ranges when treating
dense vegetative growth.
Retreatments may be made as needed, however, DO NOT
exceed a total of 64 ﬂuid ounces of Clarity per treated
acre during a growing season.
Timing: Clarity may be applied to sugarcane any time
after weeds have emerged, but before the close-in stage
of sugarcane. Applications of 32 ﬂuid ounces of Clarity
per acre made over the top of actively growing sugarcane
may result in crop injury.
When possible, direct the spray beneath the sugarcane
canopy to minimize the likelihood of crop injury. Using
directed sprays will also help maximize the spray coverage
of weed foliage.
Delay harvest until 87 days after treatment.
Sugarcane Tank Mixes
Clarity may be tank mixed with other products registered
for use in sugarcane such as Asulox®, atrazine, Evik®, and
2,4-D.
Farmstead Turf (noncropland)
and Sod Farms
DO NOT use on residential sites.
For use in general farmstead (noncropland) and sod farms,
apply 3 to 32 ﬂuid ounces of Clarity per acre to control or
suppress growth of many annual, biennial, and some
perennial broadleaf weeds commonly found in turf. Clarity
will also suppress many other listed perennial broadleaf
weeds and woody brush and vine species. Refer to
Table 2 for rate recommendations based on targeted
weed or brush species and growth stage. Some weed
species will require tank mixes for adequate control.
Repeat treatments may be made as needed; however,
DO NOT exceed 32 ﬂuid ounces of Clarity per acre, per
growing season.
Apply 30 to 200 gallons of diluted spray per treated acre
(3 to 17 quarts of water per 1,000 square feet), depending
on density or height of weeds treated and on the type of
equipment used.
To avoid injury to newly seeded grasses, delay application
of Clarity until after the second mowing. Furthermore,
applying more than 16 ﬂuid ounces of Clarity per treated
acre may cause noticeable stunting or discoloration of
sensitive grass species such as bentgrass, carpetgrass,
buffalograss, and St. Augustinegrass.
In areas where roots of sensitive plants extend, DO NOT
apply more than 4 ﬂuid ounces of Clarity per treated acre
on coarse-textured (sandy-type) soils, or in excess of
8 ﬂuid ounces per treated acre on ﬁne-textured soils.
DO NOT make repeat applications in these areas for
30 days and until previous applications of Clarity have
been activated in the soil by rain or irrigation.
Farmstead Turf (noncropland) and
Sod Farm Tank Mixes
Apply 3.2 to 8 ﬂuid ounces of Clarity per acre in a tank
mix with one of the products in Table 9 at the rates listed.
Use the higher rates when treating established weeds.
Table 9.
Tank Mix Partner Rate Per Acre
Bromoxynil (Buctril ®) 0.375 to 0.5 pound a.i.
MCPA 0.5 to 1.5 pounds a.e.
MCPP 0.5 to 1.5 pounds a.e.
2,4-D 0.5 to 1.5 pounds a.e.
Crops
This product can be used on the following crops:
Asparagus
Conservation Reserve Program (CRP)
Corn
Cotton
Fallow Systems (Between Crop Applications)
Proso Millet
Pastures, Rangeland, General Farmstead
Small Grains (Barley, Oat, Triticale and Wheat)
Sod Farms and Farmstead Turf
Sorghum
Soybean
Sugarcane
Look inside for complete
Restrictions and Limitations and
Application Instructions .
glyphosate and
2,4-D or residual herbicides such as Outlook® or Dual
Magnum®.
glyphosate

20
Pests listed in this label
Common Name Scientiﬁc Name
ANNUALS
Alkanet
Amaranth , Palmer
, Powell
, Spiny
Aster, Slender
Bedstraw, Catchweed
Beggarweed, Florida
Broomweed, Common
Buckwheat , Tartary
, Wild
Buffalobur
Burclover, California
Burcucumber
Buttercup , Corn
, Roughseed
Carpetweed
Catchﬂy, Nightﬂowering
Chamomile, Corn
Chervil, Bur
Chickweed, Common
Clovers
Cockle , Corn
, Cow
, White
Cocklebur, Common
Copperleaf, Hophornbeam
Cornﬂower (Bachelor Button)
Croton , Tropic
, Woolly
Daisy, English
Dragonhead, American
Eveningprimrose, Cutleaf
Falseﬂax, Smallseed
Fleabane, Annual
Flixweed
Fumitory
Goosefoot, Nettleleaf
Hempnettle
Henbit
Jacob’s Ladder
Jimsonweed
Knawel (German Moss)
Knotweed, Prostrate
Kochia
Ladysthumb
Lambsquarters, Common
Lettuce , Miners
, Prickly
Mallow , Common
, Venice
Marestail (Horseweed)
Mayweed
Morningglory , Ivyleaf
, Tall
Mustard , Black
, Blue
, Tansy
, Treacle
, Tumble
, Wild
Nightshade , Black
, Cutleaf
Lithospermum arvense
Amaranthus palmeri
Amaranthus powellii
Amaranthus spinosus
Aster subulatus
Galium aparine
Desmodium tortuosum
Gutierrezia dracunculoides
Fagopyrum tataricum
Polygonum convolvulus
Solanum rostratum
Medicago polymorpha
Sicyos angulatus
Ranunculus arvensis
Ranunculus muricatus
Mollugo verticillata
Silene noctiﬂorum
Anthemis arvensis
Anthriscus caucalis
Stellaria media
Trifolium spp.
Agrostemma githago
Vaccaria pyramidata
Melandrium album
Xanthium strumarium
Acalypha ostryifolia
Centaurea cyanus
Croton glandulosus
Croton capitatus
Bellis perennis
Dracocephalum parviﬂorum
Oenothera laciniata
Camelina microcarpa
Erigeron annuus
Descurainia sophia
Fumaria ofﬁcinalis
Chenopodium murale
Galeopsis tetrahit
Lamium amplexicaule
Polemonium caeruleum
Datura stramonium
Scleranthus annuus
Polygonum aviculare
Kochia scoparia
Polygonum persicaria
Chenopodium album
Claytonia perfoliata
Lactuca serriola
Malva neglecta
Hibiscus trionum
Hippuris vulgaris
Anthemis cotula
Ipomea hederacea
Ipomea purpurea
Brassica nigra
Chorispora tenella
Descurainia pinnata
Erysimum repandum
Sisymbrium altissimum
Sinapis arvensis
Solanum nigrum
Solanum triﬂorum
Pests listed in this label (continued)
Common Name Scientiﬁc Name
ANNUALS (continued)
Pennycress, Field (Fanweed,
Frenchweed, Stinkweed)
Pepperweed, Virginia
(Peppergrass)
Pigweed , Prostrate
, Redroot
 (Carelessweed)
, Smooth
, Tumble
Pineappleweed
Poorjoe
Puncturevine
Purslane, Common
Pusley, Florida
Radish, Wild
Ragweed , Common
, Giant (Buffaloweed)
, Lance-Leaf
Ragwort, Tansy
Rocket , London
, Yellow
Rubberweed, Bitter
Salsify
Sesbania, Hemp
Shepherdspurse
Sicklepod
Sida, Prickly (Teaweed)
Smartweed , Green
, Pennsylvania
Sneezeweed, Bitter
Sowthistle , Annual
, Spiny
Spikeweed, Common
Spurge, Prostrate
Spurry, Corn
Starbur, Bristly
Starwort, Little
Sumpweed, Rough
Sunﬂower, Common (Wild)
Thistle, Russian
Velvetleaf
Waterhemp , Common
, Tall
Waterprimrose, Winged
Wormwood
BIENNIALS
Burdock, Common
Carrot, Wild (Queen Anne’s
Lace)
Cockle, White
Eveningprimrose, Common
Geranium, Carolina
Gromwell
Knapweed , Diffuse
, Spotted
Mallow, Dwarf
Plantain, Bracted
Ragwort, Tansy
Starthistle, Yellow
Sweetclover
Teasel
Thistle , Bull
, Musk
, Plumeless
Thlaspi arvense
Lepidium virginicum
Amaranthus blitoides
Amaranthus retroﬂexus
Amaranthus hybridus
Amaranthus albus
Matricaria matricarioides
Diodia teres
Tribulus terrestris
Portulaca oleracea
Richardia scabra
Raphanus raphanistrum
Ambrosia artemisiifolia
Ambrosia triﬁda
Ambrosia bidentata
Senecio jacobaea
Sisymbrium irio
Barbarea vulgaris
Hymenoxys odorata
Tragopogon porrifolius
Sesbania exaltata
Capsella bursa-pastoris
Cassia obtusifolia
Sida spinosa
Polygonum scabrum
Polygonum pensylvanicum
Helenium amarum
Sonchus oleraceus
Sonchus asper
Hemizonia pungens
Euphorbia humistrata
Spergula arvensis
Acanthospermum hispidum
Stellaria graminea
Iva ciliata
Helianthus annuus
Salsola iberica
Abutilon theophrasti
Amaranthus rudis
Amaranthus tuberculatus
Ludwigia decurrens
Artemisia annua
Arctium minus
Daucus carota
Melandrium album
Oenothera biennis
Geranium carolinianum
Lithospermum spp.
Centaurea diffusa
Centaurea maculosa
Malva borealis
Plantago aristata
Senecio jacobaea
Centaurea solstitialis
Melilotus spp.
Dipsacus sativus
Cirsium vulgare
Carduus nutans
Carduus acanthoides

21
Pests listed in this label (continued)
Common Name Scientiﬁc Name
PERENNIALS
Alfalfa
Artichoke, Jerusalem
Aster , Spiny
, Whiteheath
Bedstraw, Smooth
Bindweed , Field
, Hedge
Blueweed, Texas
Bursage, Woollyleaf,
(Bur Ragweed, Povertyweed)
Buttercup, Tall
Campion, Bladder
Chickweed , Field
, Mouseear
Chicory
Clover, Hop
Dandelion
Dock , Broadleaf (Bitterdock)
, Curly
Dogbane, Hemp
Dogfennel (Cypressweed)
Fern, Bracken
Garlic, Wild
Goldenrod , Canada
, Missouri
Goldenweed, Common
Hawkweed
Henbane, Black
Horsenettle, Carolina
Ironweed
Knapweed , Black
, Russian
Milkweed , Common
, Honeyvine
, Western Whorled
Nettle, Stinging
Nightshade, Silverleaf (White
Horsenettle)
Onion, Wild
Plantain , Broadleaf
, Buckhorn
Pokeweed
Ragweed, Western
Redvine
Sericea Lespedeza
Smartweed, Swamp
Snakeweed, Broom
Sorrel, Red (Sheep Sorrel)
Sowthistle, Perennial
Spurge, Leafy
Sundrops
Thistle , Canada
, Scotch
Toadﬂax, Dalmatian
Tropical Soda Apple
Trumpetcreeper (Buckvine)
Vetch
Waterhemlock, Spotted
Waterprimrose, Creeping
Woodsorrel , Creeping
, Yellow
Wormwood , Absinth
, Louisiana
Yankeeweed
Yarrow, Common
Medicago sativa
Helianthus tuberosus
Aster spinosus
Aster pilosus
Gallium mollugo
Convolvulus arvensis
Calystegia sepium
Helianthus ciliaris
Ambrosia grayi
Ranunculus acris
Silene vulgaris
Cerastium arvense
Cerastium vulgatum
Cichorium intybus
Trifolium aureum
Taraxacum ofﬁcinale
Rumex obtusifolius
Rumex crispus
Apocynum cannabinum
Eupatorium capillifolium
Pteridium aquilinum
Allium vineale
Solidago canadensis
Solidago missouriensis
Isocoma coronopifolia
Hieracium spp.
Hyoscyamus niger
Solanum caroliniense
Vernonia spp.
Centaurea nigra
Centaurea repens
Asclepias syriaca
Ampelamus albidus
Asclepias subverticillata
Urtica dioica
Solanum elaeagnifolium
—
Allium canadense
Plantago major
Plantago lanceolata
Phytolacca americana
Ambrosia psilostachya
Brunnichia ovata
Lespedeza cuneata
Polygonum coccineum
Gutierrezia sarothrae
Rumex acetosella
Sonchus arvensis
Euphorbia esula
Oenothera perennis
Cirsium arvense
Onopordum acanthium
Linaria genistifolia
Solanum viarum
Campsis radicans
Vicia spp.
Cicuta maculata
Ludwigia peploides
Oxalis corniculata
Oxalis stricta
Artemisia absinthium
Artemisia ludoviciana
Eupatorium compositifolium
Achillea millefolium
Pests listed in this label (continued)
Common Name Scientiﬁc Name
WOODY SPECIES
Alder
Ash
Aspen
Basswood
Beech
Birch
Blackberry
Blackgum
Cedar
Cherry
Chinquapin
Cottonwood
Creosotebush
Cucumbertree
Dewberry
Dogwood
Elm
Grape
Hawthorn (Thornapple)
Hemlock
Hickory
Honeylocust
Honeysuckle
Hornbeam
Huckleberry
Huisache
Ivy, Poison
Kudzu
Locust, Black
Maple
Mesquite
Oak
Oak, Poison
Olive, Russian
Persimmon, Eastern
Pine
Plum, Sand (Wild Plum)
Poplar
Rabbitbrush
Redcedar, Eastern
Rose , McCartney
, Multiﬂora
Sagebrush, Fringed
Sassafras
Serviceberry
Spicebush
Spruce
Sumac
Sweetgum
Sycamore
Tarbush
Willow
Witchhazel
Yaupon
Yucca
Alnus spp.
Fraxinus spp.
Populus spp.
Tilia americana
Fagus spp.
Betula spp.
Rubus spp.
Nyssa spp.
Cedrus spp.
Prunus spp.
Chrysolepis chrysophylla
Populus deltoides
Larrea tridentata
Magnolia acuminata
Rubus caesius
Cornus spp.
Ulmus spp.
Vitus spp.
Crataegus spp.
Tsuga spp.
Carya spp.
Gleditsia triacanthos
Lonicera spp.
Carpinus spp.
Vaccinium arboreum
Acacia farnesiana
Rhus radicans
Pueraria lobata
Robinia pseudoacacia
Acer spp.
Prosopis ruscifolia
Quercus spp.
Rhus toxicodendron
Elaeagnus angustifolia
Diospyros virginiana
Pinus spp.
Prunus amygdalus
Populus spp.
Chrysothamnus pulchellus
Juniperus virginiana
Rosa bracteata
Rosa multiﬂorum
Artemisia frigida
Sassafras albidum
Amelanchier sanguinea
Lindera benzoin
Picea spp.
Rhus spp.
Liquidambar styraciﬂua
Platanus occidentalis
Flourensia cernua
Salix spp.
Hamamelis macrophylla
Ilex spp.
Yucca spp.

22
Conditions of Sale and Warranty
The Directions For Use of this product reﬂect the
opinion of experts based on ﬁeld use and tests. The
directions are believed to be reliable and must be
followed carefully. However, it is impossible to eliminate
all risks inherently associated with the use of this
product. Crop injury, ineffectiveness or other unintended
consequences may result because of such factors as
weather conditions, presence of other materials, or use
of the product in a manner inconsistent with its labeling,
all of which are beyond the control of BASF Agricultural
Solutions US LLC (“BASF”) or the Seller. To the extent
consistent with applicable law, all such risks shall be
assumed by the Buyer.
BASF warrants that this product conforms to the
chemical description on the label and is reasonably ﬁt for
the purposes referred to in the Directions For Use ,
subject to the inherent risks, referred to above.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF MAKES NO OTHER EXPRESS OR
IMPLIED WARRANTY OF FITNESS OR
MERCHANTABILITY OR ANY OTHER EXPRESS OR
IMPLIED WARRANTY.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BUYER’S EXCLUSIVE REMEDY AND BASF’S
EXCLUSIVE LIABILITY, WHETHER IN CONTRACT,
TORT, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, SHALL BE LIMITED TO REPAYMENT
OF THE PURCHASE PRICE OF THE PRODUCT.
TO THE EXTENT CONSISTENT WITH APPLICABLE
LAW, BASF AND THE SELLER DISCLAIM ANY
LIABILITY FOR CONSEQUENTIAL, EXEMPLARY,
SPECIAL OR INDIRECT DAMAGES RESULTING
FROM THE USE OR HANDLING OF THIS
PRODUCT.
BASF and the Seller offer this product, and the Buyer
and User accept it, subject to the foregoing Conditions
of Sale and Warranty which may be varied only by
agreement in writing signed by a duly authorized
representative of BASF.
1108
© 2026 BASF Agricultural Solutions US LLC
All rights reserved.
007969-00137 .20260504b.NVA 2026-04-0065-0061
Supersedes: NVA 2010-04-065-0154
BASF Agricultural Solutions US LLC
2 TW Alexander Drive
Research Triangle Park, NC 27713
Banvel, Basagran, Clarity, CLEARFIELD, Liberty,
LibertyLink , Outlook, Paramount, Prowl, Surtain,a n d
Zidua are registered trademarks of BASF.
Accent, Ally, Asana, Crossbow, Curtail, Express, Finesse,
FirstRate, FulTime, Garlon, Glean, Harmony, Hornet, Kerb,
Lorsban, Python, Stinger, and Tordon are registered
trademarks of Corteva Agriscience LLC.
Ambush, Beacon, Bicep II Magnum, Caparol, Dual
Magnum, Dual II Magnum, Eradicane, Evik, Peak, Princep,
Surpass, Topnotch, Tough, and Warrior are registered
trademarks of Syngenta Group Company.
Asulox, Axiom, Bronate, Buctril, Degree Xtra, Fallow
Master, Harness, Landmaster, and Roundup Ready are
registered trademarks of Bayer CropScience.
Delavan is a registered trademark of Garlock International, Inc.
Moxy is a registered trademark of Winﬁeld Solutions, LLC.
Permit is a registered trademark of Nissan Chemical Industries,
Ltd.
Pounce is a registered trademark of FMC Corp.
Turbo Teejet and Turbo Floodjet are registered trademarks of
Spraying Systems, Inc.
Spirit is a registered trademark of Gowan Company.
Banvel, ll Basagran, Clarity, yy CLEARFIELD, Liberty,yy
LibertyLink ,kk Outlook, kk Paramount,t Prowl,ll Surtain, and
Zidua are registered trademarks of BA SF.
Accent,t Ally, yy Asana, Crossbow, ww Curtail,ll Express, Finesse,
FirstRate, FulTime, Garlon, Glean, Harmony,yy Hornet,t Kerb,
Lorsban, Python, Stinger, and rr Tordon are registered
trademarks of Corteva A griscience LLC.
Ambush, Beacon, Bicep II Magnum, Caparol, ll Dual
Magnum, Dual II Magnum, Eradicane, Evik,kk Peak,kk Princep,
Surpass, Topnotch, Tough, and Warrior are registered r
trademarks of Syngenta Group Company.
Asulox,x Axiom, Bronate, Buctril, ll Degree Xtra, Fallow
Master,rr Harness, Landmaster, rr and Roundup Ready arey
registered trademarks of Bayer CropScience.
007969-00137.20260504b.NVA 2026-04-0065-0061