The old 12xx PIDs (1209/1228/120B/...) were wrong addresses -- that's why
they returned 'no response' on the truck, NOT a bus/gateway problem. The real
Ford-enhanced DIDs are in the 09xx/14xx/16xx families. Confirmed by the truck's
own brute-scan: 1446=ICP, 1445=EBP, 1440=MAP, 1442=BARO, 1310=EOT, 11B3=gear,
11B4=TSS all decode to sane on-vehicle values.
- Rewrite FORD_60_PIDS with corrected addresses + [VERIFIED]/[DOC]/[TENTATIVE] tags
- FICM voltages -> 09D0/09CF/09CE/09CD (09D0 Main = the ~48V no-start metric)
- ICP=1446 *0.57, IPR=1434, ICP_V=16AD; EOT scaling fixed to /100-40
- watch --ford now streams 09D0/09CF/1446/1434 (FICM main V + ICP during crank)
- Add diagnostics/2026-06-29-no-start/pid-research.md (full workflow findings)
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016yT89n4zR4qbrySoSiEyZs
obd_reader.py:
- Mode 22 plumbing: ELM.mode22() sends a 16-bit PID request, parses both
positive (62 ..) and negative (7F 22 NRC) responses.
- --ford runs a small TENTATIVE table of community-sourced Ford 6.0 PIDs
(ICP/IPR/FICM/EBP/EOT). All printed with raw bytes for verification.
- --pid XXXX probes a single PID and prints multiple candidate decodings
(u8, u16, mV, temp, duty) so we can eyeball the right scaling.
- --watch [N] streams ATRV + module voltage (PID 0142) for N seconds.
Designed for capturing voltage sag during cranking.
- --scan AAAA-BBBB brute-force scans Mode-22 PIDs with --scan-log PATH
for output. Uses fast ELM timing (ATAT2, ATST19) for ~3.5 PIDs/sec.
diagnostics/2026-06-29-no-start/:
- Captured cranking voltage trace, full Mode-22 scan (1000-14FF -> 46
hits), and a session writeup. Working hypothesis: not batteries, not
fuel -- ICP / FICM / CMP. FICM meter test still owed.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Read stored/pending/permanent DTCs, decode with 6.0-relevant codes flagged,
guarded mode-04 clear (--clear), key live PIDs + battery voltage, and a
6.0 no-start triage checklist. Tested against a CH340 ELM327 v1.5 adapter.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016yT89n4zR4qbrySoSiEyZs
justin