justin/crop-chem-docs

Fork 0

Files

T

crop-chem-docs-refresh 492c23c9cc monthly refresh: 2026-10-01T07:24Z — bayer=91 epa_ppls=4073

2026-10-01 07:24:35 +00:00

62 KiB

Raw Blame History

INDAR 75 WSP

EPA Reg No: 62719-421
Registrant: CORTEVA AGRISCIENCE, LLC
Signal word: Caution
Active ingredients: Fenbuconazole (75%)
Label accepted: 2026-09-21
Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/062719-00421-20260921.pdf

September 21, 2026

Tamara Lunsman, Ph.D. Principal Investigator, US Regulatory Leader Corteva Agriscience LLC 9330 Zionsville Road Indianapolis, Indiana 46268 [email protected]

Subject: Label Amendment - Registrati on Review Mitigation for Fenbuconazole Product Name: Indar 75WSP EPA Registration Number: 62719-421 Case Number: 473381 Application Dates: March 31, 2022

Dear Tamara Lunsman:

The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, has completed reviewing all the information submitted with your application to support the Registration Review of the above referenced product in connection with the Fenbuconazole Interim Decision, and has concluded that your submission is acceptable. The label referred to above, submitted in connection with registration under FIFRA, as amended, is acceptable.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 EPA Reg. No. 62719-421 Case No. 473381

submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 12 months from the date of this letter. After 12 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

If you have any questions about this letter, please contact Concepción Rodríguez by phone at 202-566-0820, or via email at [email protected].

S i n c e r e l y ,

Julie Javier, Team Leader Risk Mitigation and Implementation Branch 4 Pesticide Re-Evaluation Division Office of Pesticide Programs

ENCLOSURE: Stamped label

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 1 (Bulk/Tote base label): FENBUCONAZOLE GROUP G1 FUNGICIDE Indar® 75WSP Fungicide Active Ingredient fenbuconazole: a-[2-(4-chlorophenyl)ethyl]- a-phenyl-1H-1,2,4-triazole-1-propanenitrile . 75% Other Ingredients ................................................... 25% Total ..................................................................... 100% Keep Out Of Reach Of Children CAUTION First Aid If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-992-5994 day or night for emergency treatment information. PRECAUTIONARY STATEMENTS Hazards to Humans and Domestic Animals CAUTION Harmful If Swallowed Or Absorbed Through The Skin Avoid contact with skin, eyes or clothing. Personal Protective Equipment (PPE) Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks • Waterproof gloves • Chemical-resistant headgear for overhead exposure User Safety Requirements Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Engineering Controls Water soluble packets, when used correctly, qualify as a closed mixing/loading system under the worker Protection Standard [40 CFR 170.607(d)]. Mixers and loaders handling this product while it is enclosed in intact water soluble packets may elect to wear reduced PPE of long-sleeved shirt, long pants, shoes, Sep 21, 2026 62719-421

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 2 socks. When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment break-down.

User Safety Recommendations Users should: • Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet. • Remove clothing/PPE immediately if pesticides get inside. Then wash and put on clean clothing. • Remove PPE immediately after handling product. Wash outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

Environmental Hazards This product is toxic to fish. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high-water mark. Drift or runoff from treated areas may be hazardous to aquatic organisms in adjacent aquatic sites. Do not contaminate water when disposing of equipment washwaters or rinsate.

Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. Refer to the label booklet under "Agricultural Use Requirements" in the Directions for Use section for information about this standard.

(Storage and Disposal for rigid containers 5 gal or less) Storage and Disposal Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in a cool, dry area above freezing. If in a water-soluble pouch, the water- soluble pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not remove the water-soluble pouches from container except for immediate use. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities.

(Storage and Disposal for nonrigid containers any size) Storage and Disposal Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in a cool, dry area above freezing. If in a water-soluble pouch, the water- soluble pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not remove the water-soluble pouches from container except for immediate use. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 3

(Storage and Disposal for refillable rigid containers greater than 5 gal) Storage and Disposal Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in a cool, dry area above freezing. If in a water-soluble pouch, the water- soluble pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not remove the water-soluble pouches from container except for immediate use. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank. Fill the container about 10% full with water and, if possible, spray all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If burned, stay out of smoke.

(Storage and Disposal for nonrefillable rigid containers larger than 5 gal) Storage and Disposal Do not contaminate water, food, or feed by storage or disposal. Pesticide Storage: Store in a cool, dry area above freezing. If in a water-soluble pouch, the water- soluble pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not remove the water-soluble pouches from container except for immediate use. Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If burned, stay out of smoke.

Refer to label booklet for additional precautionary information and Directions for Use.

Notice: Read the entire label. Use only according to label directions. Before using this product, read Warranty Disclaimer, Inherent Risks of Use, and Limitation of Remedies at end of label booklet. If terms are unacceptable, return at once unopened.

In case of emergency endangering health or the environment involving this product, call 1-800-992-5994.

Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing.

EPA Reg. No. 62719-421 EPA Est. _______

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 4

™®Trademarks of Corteva Agriscience and its affiliated companies

Produced for Corteva Agriscience LLC 9330 Zionsville Road Indianapolis, IN 46268 Net Weight _____

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 5 (shipping / small container base label):

FENBUCONAZOLE GROUP G1 FUNGICIDE

Indar® 75WSP

Fungicide

Active Ingredient fenbuconazole: a-[2-(4-chlorophenyl)ethyl]- a-phenyl-1H-1,2,4-triazole-1-propanenitrile . 75% Other Ingredients ................................................... 25% Total ..................................................................... 100%

Keep Out Of Reach Of Children CAUTION

First Aid If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. If swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.

Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-992-5994 day or night, for emergency treatment information.

Refer to inside of label booklet for additional precautionary information including Directions for Use.

In case of emergency endangering health or the environment involving this product, call 1-800-992-5994.

Agricultural Chemical: Do not ship or store with food, feeds, drugs or clothing.

EPA Reg. No. 62719-421 EPA Est. _______

™ ®Trademarks of Corteva Agriscience and its affiliated companies

Produced for Corteva Agriscience LLC 9330 Zionsville Road Indianapolis, IN 46268 Net Weight _____

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 6 (Page 1 through end):

PRECAUTIONARY STATEMENTS Hazards to Humans and Domestic Animals CAUTION

Harmful If Swallowed Or Absorbed Through The Skin

Avoid contact with skin, eyes or clothing.

Personal Protective Equipment (PPE)

Applicators and other handlers must wear: • Long-sleeved shirt and long pants • Shoes plus socks • Waterproof gloves • Chemical-resistant headgear for overhead exposure

User Safety Requirements Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.

Engineering Controls Water soluble packets, when used correctly, qualify as a closed mixing/loading system under the worker Protection Standard [40 CFR 170.607(d)]. Mixers and loaders handling this product while it is enclosed in intact water-soluble packets may elect to wear reduced PPE of long-sleeved shirt, long pants, shoes, socks. When reduced PPE is worn because a closed system is being used, handlers must be provided all PPE specified above for “applicators and other handlers” and have such PPE immediately available for use in an emergency, such as a spill or equipment break-down.

DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying.

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 7 Agricultural Use Requirements Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE)and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.

Do not enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil or water, is: • Coveralls over long-sleeved shirt and pants • Shoes plus socks • Waterproof gloves

Product Information

Indar® 75WSP fungicide is a systemic fungicide with preventative and curative properties used for the control of specific diseases listed on this label. For optimal disease control with Indar 75WSP, apply sprays on a preventive spray program.

Indar 75WSP is considered not hazardous to bees, including those which are actively foraging in the area during application, when used as directed.

A non-polymer containing spray adjuvant approved for use with registered pesticide products may be added to spray solutions according to manufacturer’s use instructions to achieve optimum disease control.

Do not apply Indar 75WSP in greenhouses.

Resistance Management

For resistance management, Indar 75WSP contains a Group G1 fungicide. Any fungal population may contain individuals naturally resistant to Indar 75WSP and other Group G1 fungicides. A gradual or total loss of pest control may occur over time if these fungicides are used repeatedly in the same fields. Appropriate resistance-management strategies should be followed.

To delay fungicide resistance, take one or more of the following steps: • Avoid application of more than the maximum consecutive sprays of Indar 75WSP or other fungicides in the same group in a season (see specific max application guidelines in Directions for Use). • Use tank mixtures with fungicide from a different group that are equally effective on the target pest when such use is permitted. Use at least the minimum application rate as labeled by the manufacturer. • Adopt an integrated disease management program for fungicide use that includes scouting, uses historical information related to pesticide use, and crop rotation, and which considers host plant resistance, impact of environmental conditions on disease development, disease thresholds, as well as cultural, biological and other chemical control practices. • Where possible, make use of predictive disease models to effectively time fungicide applications. Note that using predictive models alone is not sufficient to manage resistance. • Monitor treated fungal populations for resistance development. • Contact your local extension specialist or certified crop advisor for any additional pesticide resistance-management and/or IPM recommendations for specific crops and pathogens.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 8 • Contact your extension specialist, certified crop consultant, or Corteva Agriscience representative for the latest resistance management information.

Use Rate Determination

Carefully read, understand and follow label use rates and restrictions. Under low disease conditions, use minimum application rates, while maximum application rates and shortened spray schedules are for severe or threatening disease conditions. For proper application, determine the number of acres to be treated, the label use rate and the gallonage to be applied per acre. Prepare only the amount of spray solution required to treat the measured acreage. Carefully calibrate spray equipment prior to use.

Handling for Water Soluble Pouches

Soluble Packages (WSPs) are designed to dissolve in water. Agitation may be used, if necessary, to help dissolve the WSP. Failure to follow handling and mixing instructions can increase your exposure to the pesticide products in WSPs. WSPs, when used properly, qualify as a closed mixing/loading system under the Agricultural Worker Protection Standard [40 C.F.R. 170.607(d)].

Handling Instructions Follow these steps when handling pesticide products in WSPs.

Mix in spray tank only.
Handle the WSP in a manner that protects package from breakage and/or unintended release of contents. If package is broken, put on PPE required for clean-up and then continue with mixing instructions.
Keep the WSP in outer packaging until just before use.
Keep the WSP dry prior to adding to the spray tank.
Handle with dry gloves and according to the label instructions for PPE.
Keep the WSP intact. Do not cut or puncture the WSP.
Reseal the WSP outer packaging to protect any unused WSP(s).

Mixing Directions

Follow the steps below when mixing this product, including if it is tank-mixed with other pesticide products. If being tank-mixed, the mixing directions 1 through 9 below take precedence over the mixing directions of the other tank mix products. WSPs may, in some cases, be mixed with other pesticide products so long as the directions for use of all the pesticide product components do not conflict. Do not tank-mix this product with products that prohibit tank-mixing or have conflicting mixing directions. Note: Reduced product efficacy may occur if water containing suspended soil particles, such as water from ponds, streams or unlined ditches, is used.

If a basket or strainer is present in the tank hatch, remove prior to adding the WSP to tank.
Fill tank with water to approximately one-third to one-half of the desired final volume of spray.
Stop adding water and stop any agitation.
Place intact/unopened WSP into the tank.
Do not spray water from a hose or fill pipe to break or dissolve the WSP.
Start mechanical and recirculation agitation from the bottom of tank without using any overhead recirculation, if possible. If overhead recirculation cannot be turned off, close the hatch before starting agitation.
Dissolving the WSP may take up to 5 minutes or longer, depending on water temperature, water hardness and intensity of agitation.
Stop agitation before tank lid is opened.
Open the lid to the tank, exercising caution to avoid contact with dusts or spray mix, to verify that the WSP has fully dissolved and the contents have been thoroughly mixed into the solution.
Do not add other allowed products or complete filling the tank until the bags have fully dissolved and pesticide is thoroughly mixed.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 9 11. Once the WSP has fully dissolved and any other products have been added to the tank, resume filling the tank with water to the desired level, close the tank lid, and resume agitation. 12. Use the spray solution when mixing is complete. 13. Maintain agitation of the diluted pesticide mix during transport and application. 14. It is unlawful to use any registered pesticide, including WSPs, in a manner inconsistent with its label.

Application Directions

Do not make ground or aerial applications within 75 feet of streams, rivers, ponds, lakes or reservoirs.

Spray Drift Advisories

THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT. BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

Importance Of Droplet Size An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions.

Controlling Droplet Size – Ground Boom • Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. • Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. • Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.

Controlling Droplet Size – Aircraft • Adjust Nozzles - Follow nozzle manufacturers’ recommendations for setting up nozzles. Generally, to reduce fine droplets, nozzles should be oriented parallel with the airflow in flight. • The distance of the outer most nozzles on the boom must not exceed 3/4 the length of the wingspan or rotor. • Nozzles must always point backward parallel with the air stream and never be pointed downwards more than 45 degrees. • Where states have more stringent regulations, they must be observed.

Boom Height – Ground Boom For ground equipment, the boom should remain level with the crop and have minimal bounce.

Release Height – Aircraft Higher release heights increase the potential for spray drift.

Shielded Sprayers Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

Temperature and Humidity When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

Temperature Inversions Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 10 ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.

Wind Drift potential generally increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

Boomless Ground Applications: Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.

Handheld Technology Applications: Take precautions to minimize spray drift.

Ground Application Thorough coverage sprays generally result in optimum disease control. To achieve good coverage, use proper spray pressure, gallonage per acre, nozzles, nozzle spacing and tractor speed. Consult spray nozzle and accessory catalogues for specific information on proper equipment calibration. For tree fruits and nuts, apply the same amount of Indar 75WSP per acre in either dilute or concentrate sprays.

Aerial Application Apply in a minimum of 5 gallons of water per acre on annual crops and 10 gallons of water per acre on perennial tree fruits and nuts. Do not apply Indar 75WSP under conditions when uniform coverage cannot be obtained or when excessive spray drift may occur. Flagmen and loaders should wash thoroughly before eating, drinking or smoking and at the end of each day’s spray operation.

Chemigation Application Apply Indar 75WSP through properly equipped chemigation systems for disease control in cranberry on a regular protectant fungicide schedule. Follow use directions for cranberry in the Uses section of this label. Do not apply Indar 75WSP by chemigation to other labeled crops.

General Directions for Sprinkler Chemigation: Apply Indar 75WSP only through overhead sprinkler irrigation systems that will apply water uniformly, including center pivot, lateral move, end tow, side (wheel) roll, traveler, big gun, solid set, or hand move. Do not apply this product through any other type of irrigation system. Sprinkler systems that deliver a low coefficient of uniformity such as certain water drive units are not recommended.

Chemigation Preparation: The following use directions are to be followed when this product is applied through sprinkler irrigation systems. Thoroughly clean the chemigation system and tank of any fertilizer or chemical residues, and dispose of the residues according to state and federal laws. Flush the injection system with soap or a cleaning agent and water. Determine the amount of Indar 75WSP needed to cover the desired acreage. Mix according to instructions in the Mixing Directions section. Continually agitate the mixture during mixing and application.

Chemigation Equipment Calibration: It is suggested that the injection pump/system be calibrated at least twice before operation, and the system must be monitored during operation.

Center Pivot, Lateral Move, End Tow, Traveler Irrigation Equipment: Use this equipment only with electric or oil hydraulic drive systems, which provide a uniform water distribution. In order to calibrate the irrigation system and injector to apply the mixture containing Indar 75WSP, determine the following: 1) Calculate the number of acres irrigated by the system; 2) Calculate the time required to apply no more than 1/4 water (6.750 gallons of water per acre) over the area to be treated when the system and injection equipment are operated at normal pressures specified by the equipment manufacturer (run system at 80 to 95% of manufacturer’s rated capacity); 3) Calculate the injection pump output when operated at normal line pressure using only water; 4) Calculate the total amount of fungicide mixture needed to cover the

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 11 desired acreage; 5) Add the required amount of Indar 75WSP and water to meet the injection time requirements of the solution tank.

Solid Set, Side (Wheel) Roll, Hand Move Irrigation Equipment: In order to calibrate the irrigation system and injector to apply the mixture containing Indar 75WSP, determine the following: 1) Calculate the number of acres irrigated by the system; 2) Fill the injector solution tank with water and adjust the flow rate to use the contents over a 10- to 30-minute interval; 3) Calculate the total amount of fungicide mixture needed to cover the desired acreage and add Indar 75WSP into the same quantity of water used to calibrate the injection equipment. Operate the system at normal pressures specified by the manufacturer and used for the time interval established during calibration.

Chemigation Operation: Start the water pump and irrigation system, and let the system achieve the desired pressure and speed before starting the injector. Check for leaks and uniformity and make repairs before any chemigation takes place. Start the injection system and calibrate according to manufacturer’s specifications. This procedure is necessary to deliver the desired rate per acre in a uniform manner. Inject Indar 75WSP at the end of the irrigation cycle or as a separate application to maximize foliar fungicide retention. When the application is finished, allow the entire irrigation and injection system to be thoroughly flushed clean before stopping the system.

Chemigation Precautions: • Lack of effectiveness or illegal pesticide residues in the crop can result from non-uniform distribution of treated water. • If you have questions about calibration, contact state extension service specialists, equipment manufacturers or other experts. • Do not connect an irrigation system used for pesticide application (including greenhouse systems) to a public water system unless the pesticide label prescribed safety devices for public water systems are in place with current certification. Specific local regulations may apply and must be followed. • A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall operate the system and make necessary adjustments should the need arise and continuously monitor the injection. • Do not apply when wind speed favors drift beyond the area intended for treatment. End guns must be turned off during the application if they irrigate non-target areas. • Do not allow irrigation water to collect or run off and pose a hazard to livestock, wells, or adjoining crops. • Do not enter treated area during the reentry interval specified in the Agricultural Use Requirements section of this label unless required PPE is worn. • Do not apply through sprinkler systems that deliver a low coefficient of uniformity such as certain water drive units.

Chemigation Specific Equipment Requirements: • The system must contain an air gap, or approved back flow prevention device, or approved functional check valve, vacuum relief valve (including inspection port), and low-pressure drain appropriately located on the irrigation pipeline to prevent water source contamination from back flow. Refer to the American Society of Agricultural Engineer's Engineering Practice 409 for more information or state specific regulations. • The pesticide injection line must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection chemical supply. • A pesticide injection pump must also contain a functional interlock, e.g., mechanical or electrical, to shut off chemical supply when the irrigation system is either automatically or manually shut down. • The system must contain functional interlocking controls to automatically shut off the pesticide injection when the water pressure drops too low or water flow stops. • Use of public water supply requires approval of a backflow prevention device or air gap (preferred) by both state and local authorities. • Systems must use a metering pump, such as a positive displacement injection pump (or flow meter on eductor), effectively designed and constructed of materials that are compatible with pesticides and

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 12 capable of being fitted with a system interlock. An electric powered pump must meet Section 675 for "Electrically Driven or Controlled Irrigation Machines" NEC 70. • To ensure uniform mixing of the fungicide into the water line, inject the mixture in the center of the pipe diameter or just ahead of an elbow or tee in the irrigation line so that the turbulence created at those points will assist in mixing. The injection point must be located after all back flow prevention devices on the water line. • The tank holding the fungicide mixture should be free of rust, fertilizer, sediment, and foreign material, and equipped with an in-line strainer situated between the tank and the injection point.

Orchard Use

Apply Indar 75WSP to orchards using a dilute or concentrate spray.

Dilute Spray: Dilute or thorough coverage applications are based upon the amount of spray solution necessary to thoroughly wet the trees until spray run-off. To determine the number of gallons of dilute spray required per acre, contact your state agricultural experiment station, certified pest control advisor, or extension specialist for assistance.

Concentrate Spray: Concentrate spray applications assume all of the tree is uniformly covered with spray solution but not to the point of run-off. A lower spray volume is used to deliver the same application rate per acre as used for a dilute spray. Use a minimum of 50 gallons of spray solution per acre for concentrate sprays with Indar 75WSP.

Compatibility

Indar 75WSP is compatible with most commonly used agriculture fungicides, insecticides, growth regulators, micronutrients and spray adjuvants. When preparing tank mixes, consult spray compatibility charts or State Cooperative Extension Service Specialists prior to actual use. Indar 75WSP is compatible with boron and spray oils; however, the water-soluble pouches must be completely dissolved before adding spray oils or products containing boron to spray mixtures.

Use of Adjuvants Surfactants may improve spray coverage, especially for waxy leaf surfaces. For best results do not use penetrants. Use only adjuvants that are registered for agricultural use and are known to be safe for the crop. Follow directions on the manufacturer’s label. When an adjuvant is to be used with this product, Corteva Agriscience recommends the use of a Chemical Producers and Distributors Association certified adjuvant. For nonionic surfactants, a spray mix concentration of 0.25% v/v or less generally is sufficient. For organosilicones, a spray mix concentration of 0.05% v/v or less generally is sufficient. Conduct a compatibility test (jar test) using the relative proportions of the tank mix ingredients before mixing ingredients in the spray tank.

Plantback Intervals

Plantback intervals (PBI) for crops without primary label uses (such as rotational crops), where the last application of the product expended is <0.188 lb active per acre, the PBI must be 35 days. Where the last application of the product expended is 0.188 to 1 lb active per acre, the PBI must be 210 days.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 13 Uses

Almond

Disease Indar 75WSP Use Directions

Restrictions oz/100 gal1 oz/acre blossom blight (Monilinia spp.) 0.4 – 0.67 1.25 - 2 (0.06 - 0.094 lb active) Begin applications at pink bud stage (about 5% bloom). If conditions are favorable for disease development, apply again at full bloom and at petal fall. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 3 applications or apply more than a total of 6 oz of Indar 75WSP (0.28 lb active) per acre per year. • Preharvest Interval: Do not apply within 160 days of harvest. • Minimum Re- Treatment Interval: 10 days • Do not apply this product by chemigation to almond. 1 Based upon a standard of 300 gallons of dilute spray per acre or the equivalent amount of product per acre as a concentrate spray.

Apple

Disease Indar 75WSP oz/acre1

Use Directions

Restrictions flyspeck (Zygophiala jamaicensis) powdery mildew (Podosphaera leucotricha) rusts (Gymnosporangium spp.) scab (Venturia ineaqualis) sooty blotch (Gloeodes pomigena) 2 - 2.67 (0.094 - 0.125 lb active) Begin application at green tip or when environmental conditions become favorable for disease development. Apply on a 7- to 10-day schedule through the first cover spray; thereafter, apply on a 10- to 14-day schedule. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 4 applications or apply more than a total of 10.67 oz of Indar 75WSP (0.5 lb active) per acre per year. • Preharvest Interval: Do not apply within 14 days of harvest. • Do not graze livestock in treated areas or feed cover crops grown in treated areas to livestock. • Do not apply this product by chemi gation to apple. 1Maintain per acre use rate regardless of spray volume per acre.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 14 Blueberry

Disease Indar 75WSP oz/acre

Use Directions

Restrictions alternaria (Alternaria spp.) anthracnose (Colletotrichum gloeosporioides) leaf spot and blotch (Mycosphaerella spp., Septoria spp.) mummy berry disease (Monilinia vaccinii- corymbosi) phomopsis twig blight and fruit rot (Phomopsis vaccinii) powdery mildew (Microsphaera vaccinii) rusts (Puccianiastrum spp. ) 2 – 2.67 (0.094 – 0.125 lb active) For mummy berry and phomopsis twig blight, begin applications when the plants break dormancy (at early green tip or bloom, depending upon variety), and make subsequent applications at intervals of 8 to 14 days. For control of powdery mildew and other listed diseases, begin applications prior to or at onset of disease development and repeat at 8- to 14-day intervals. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 4 applications or apply more than a total of 8 oz of Indar 75WSP (0.38 lb active) per acre per year. • Preharvest Interval: Do not apply within 30 days of harvest. • Do not graze livestock in treated fields or offer treated material as a livestock feed item. • Do not apply this product by chemigation to blueberry.

Citrus Fruits (Crop Group 10)1 1Citrus fruits (crop group 10) including: calamondin, citrus citron, chironja, citrus hybrids, grapefruit, kumquat, lemon, lime, orange (sour, sweet, mandarin), pummelo, satsuma mandarin, tangerine, tangelo, tangor

Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. Obtain optimum disease control by applying Indar 75WSP with a nonionic surfactant or spray oil at the manufacturer’s specified rate and making thorough coverage applications.

Disease Indar 75WSP oz/acre

Use Directions

Restrictions greasy spot (Mycosphaerella citri) 2.67 (0.125 lb active) Make the first application at the normal timing for greasy spot in your area. Make a second application for control of greasy spot of foliage and rind blotch of fruit after the first summer flush. Application for control of greasy spot may also occur at other times. • Do not make more than 3 applications or apply more than a total of 8.01 oz of Indar 75WSP (0.375 lb active) per acre per year. • Preharvest Interval: Up to day of harvest. • Minimum Re-Treatment Interval: 21 days. • Do not allow livestock to graze in treated areas. • Do not apply Indar 75WSP with polymer based spray adjuvants. • Do not apply this product by chemigation to citrus. scab (Elsinoe fawcettii) Make the first application between feather flush and 25% expansion of spring leaf flush. Make a second application at petal fall. Follow 3 to 4 weeks later with another fungicide for control of late scab and early melanose. sooty mold (Capnodium spp.) Applications made for control of greasy spot or scab will also control soot y mold.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 15 Cranberry

Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. This product may also be used in a chemigation application to cranberry (see Chemigation Application section). For optimum disease control, use an agriculturally registered non- polymer nonionic surfactant at the manufacturer’s specified rate.

Disease Indar 75WSP oz/acre

Use Directions

Restrictions cottonball tip blight (Monilinia oxycocci) 2 - 4 (0.094 - 0.188 lb active) Begin applications when 50% of the shoots have begun to elongate. Refer to your local spray guides for more specific application timin g information. • Do not make more than 4 applications or apply more than a total of 16 oz of Indar 75WSP (0.75 lb active) per acre per year. • Preharvest Interval: Do not apply within 30 days of harvest. cranberry fruit rot complex1 Begin applications prior to bloom at the onset of disease. Continue on a 10- to 14-day spray schedule depending upon local conditions. Refer to your local guides for more specific application information. fairyring complex (suppression) 4 (0.188 lb active) For maximum suppression of fairyring complex, measure 10 ft out from the visible fairyring region and apply the spray solution of Indar 75WSP to this entire area. Make the first application at bud break and repeat once, if necessary, 14 days later. Apply Indar 75WSP in 30 to 100 gallons of water per acre. To improve the performance of Indar 75WSP against the fairyring complex, irrigate the treated area for 1 to 2 hours following each application. 1Cranberry fruit rot disease complex may contain one or more of the following fungal pathogens: Allantophomopsis lycopodina, Botryosphaeria vaccinii, Coleophoma empetri, Diaporthe vaccinii, Glomerella cingulata-vaccinii, Godronia cassandrae, Phyllosticta vaccinii, Physalospora vaccinii, Colletotrichum spp. , Phomopsis vaccinii and Strasseria geniculata.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 16 Peanut

Disease Indar 75WSP oz/acre

Use Directions

Restrictions early leaf spot (Cercospora arachidicola) 1.25 - 2 (0.062 - 0.094 lb active) Begin foliar applications approximately 4 weeks after planting or at first sign of disease development and continue application on a 10- to 14-day schedule. Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 4 applications or apply more than a total of 10.67 oz of Indar 75WSP (0.5 lb active) per acre per year. • Preharvest Interval: Do not apply within 14 days of harvest. • Do not feed hay or threshings or allow livestock to graze in treated areas. • Do not apply this product by chemi gation to peanut. late leaf spot (Cercosporidium personatum) 2 – 2.67 (0.094 - 0.125 lb active)

Pecan

Disease Indar 75WSP oz/acre

Use Directions

Restrictions downy spot (Mycosphaerella caryigena) gnomonia leafspot (Gnomonia dispora) leaf blotch (Mycosphaerella dendroides) leaf scorch powdery mildew (Micosphaera penicillata) scab (Cladosporium caryigenum) vein spot (Gnomonia nerviseda) 2 - 2.5 (0.09 - 0.12 lb active) Begin applications at bud break and continue at 10- to 14-day intervals through pollination. Apply at 14- to 21-day intervals through the cover sprays. Apply aerially in a minimum of 10 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 6 applications or apply more than a total of 16 oz of Indar 75WSP (0.75 lb active) per acre per season. • Preharvest Interval: Do not apply after shuck split or within 28 days of harvest. • Do not graze livestock in treated areas or feed cover crops grown in treated areas to livestock. • Do not apply after shuck split. • Do not apply this product by chemigation to pecan.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 17 Peppers Including bell pepper, chili pepper, cooking pepper, pimento, sweet pepper

Disease Indar 75WSP oz/acre

Use Directions

Restrictions cercospora leaf spot powdery mildew 2 - 4 (0.094 – 0.188 lb active) Begin applications when disease is first observed. Reapply 10 to 14 days later or as necessary for the level of disease pressure present. Apply uniformly in a spray volume that assures thorough coverage of the crop. A minimum spray volume of 30 gallons per acre is necessary. Disease control may be reduced at low spray volumes or if spray coverage is inadequate. For optimal disease control, apply as a ground application. Aerial application is permitted; however, disease control may be reduced when product is applied by air. For optimum performance, add a nonionic surfactant to the solution. • Do not apply more than 4 oz of Indar 75WSP per acre per application or more than a total of 16 oz of Indar 75WSP (0.75 lb active) per acre per crop. • Do not make more than 2 consecutive applications of Indar 75WSP. Alternate within 14 days with a product which is effective on the target pathogen and has a different mode of action than Indar 75WSP. • Preharvest Interval: Do not apply within 7 days of harvest. • Minimum Re-Treatment Interval: 10 days • Do not apply this product by chemigation to peppers.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 18 Stone Fruits (Crop Group 12)1 1Stone fruit (crop group 12) including apricot, chickasaw plum, damson plum, fresh prune, Japanese plum, nectarine, peach, plum, plumcot, sweet cherry, tart cherry

Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. For optimum disease control, add a non-polymer spray adjuvant/wetting agent labeled for use on food crops to spray solutions at the manufacturers' specified rate.

Crop

Disease Indar 75WSP oz/acre

Use Directions

Restrictions apricot nectarine peach sweet cherry tart cherry blossom blight (Monilinia spp.) 2 (0.094 lb active) Begin applications at early red bud stage before infection occurs. If conditions are favorable for disease development, apply again at full bloom and at petal fall. • Do not make more than 8 applications or apply more than a total of 16 oz of Indar 75WSP (0.75 lb active) per acre per season. • Preharvest Interval: Up to day of harvest. • Do not graze livestock in treated areas or feed cover crops grown in treated areas to livestock. • Do not apply this product by chemigation to stone fruits. fruit brown rot (Monilinia spp.) Begin applications 2 to 3 weeks before harvest using a 7- to 10-day spray interval. sweet cherry tart cherry leaf spot (Blumeriella spp.) Follow blossom blight schedule and continue application at 10- to 14- day intervals. Additional foliar applications may be made after harvest. peach scab (Cladosporium spp.) Begin applications at shuck split. Make 2 to 3 subsequent thorough coverage applications at 10- to 14-da y intervals. chickasaw plum damson plum fresh prune Japanese plum plum plumcot blossom blight (Monilinia spp.) Begin applications at early red bud stage before infection occurs. If conditions are favorable for disease development, apply again at full bloom and at petal fall. • Do not make more than 4 applications or apply more than a total of 8 oz of Indar 75WSP (0.38 lb active) per acre per year. • Preharvest Interval: Up to day of harvest. • Do not graze livestock in treated areas or feed cover crops grown in treated areas to livestock. • Do not apply this product by chemigation to stone fruits. fruit brown rot (Monilinia spp.) Begin applications 2 to 3 weeks before harvest using a 7- to 10-day spray interval.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 19 Sugarbeets

Disease Indar 75WSP oz/acre

Use Directions

Restrictions cercospora leaf spot (Cercospora beticola) powdery mildew (Erysiphe spp.) 2.67 (0.125 lb active) Apply Indar 75WSP at intervals of 14 to 21 days beginning when conditions are favorable for disease development. For resistance management, alternate applications of Indar 75WSP with a non- triazole fungicide labeled for use on sugarbeets. For optimum disease control, an adjuvant, such as crop oil concentrate that is labeled for crop use, may be added to the spray mixture at the manufacturer’s specified rate. Add an adjuvant to the spray solution last. For best spray coverage of foliage, apply aerially in a minimum of 5 to 7 gallons of water per acre or by ground in a minimum of 20 gallons of water per acre. • Do not make more than 2 applications or apply more than a total of 5.34 oz of Indar 75WSP (0.25 lb active) per acre per year. • Preharvest Interval: Do not apply within 14 days of harvest. • Do not apply this product by chemigation to sugarbeets.

Wheat

Disease Indar 75WSP oz/acre

Use Directions

Restrictions glume blotch (Septoria nodorum) leaf blight, spot blotch, barley scald (Rhynchosprium spp.) leaf blotch (Septoria tritici) powdery mildew (Erysiphe graminis) rusts (Puccinia spp.) tan spot, net blotch (Pyrenophora spp.) 1.25 (0.06 lb active) Apply anytime through heading (Feekes growth stage 10.3 to 10.5) on a 7- to 21-day schedule. Apply aerially in a minimum of 5 gallons of water per acre or by ground in a minimum of 15 gallons of water per acre. • Do not make more than 2 applications or apply more than a total of 2.5 oz of Indar 75WSP (0.12 lb active) per acre per year. • Preharvest Interval: Do not apply after completion of flowering (Feekes growth stage 10.5) or within 35 days of harvest. • Preharvest Interval: Do not apply within 14 days of harvest for forage and hay. • Do not apply this product by chemi gation to wheat.

Storage and Disposal Do not contaminate water, food or feed by storage or disposal. Pesticide Storage: Store in a cool, dry area above freezing. If in a water-soluble pouch, the water- soluble pouch may become brittle at storage temperatures below 32°F but the fungicide is not affected. Do not remove the water-soluble pouches from container except for immediate use.

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 20 Pesticide Disposal: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.

Nonrefillable rigid containers 5 gallons or less: Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures allowed by state and local authorities.

Nonrefillable nonrigid containers: Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available.

Refillable rigid containers larger than 5 gal: Container Handling: Refillable container. Refill this container with pesticide only. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or a mix tank. Fill the container about 10% full with water and, if possible, spray all sides while adding water. If practical, agitate vigorously or recirculate water with the pump for two minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If burned, stay out of smoke.

Nonrefillable rigid containers larger than 5 gal: Container Handling: Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Pressure rinse as follows: Empty the remaining contents into application equipment or a mix tank and continue to drain for 10 seconds after the flow begins to drip. Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 psi for at least 30 seconds. Drain for 10 seconds after the flow begins to drip. Then offer for recycling if available. Or puncture and dispose of in a sanitary landfill, or by incineration, or if allowed by state and local authorities, by burning. If burned, stay out of smoke.

Terms and Conditions of Use If terms of the following Warranty Disclaimer, Inherent Risks of Use and Limitation of Remedies are not acceptable, return unopened package at once to the seller for a full refund of purchase price paid. To the

A3B / Indar 75WSP / MSTR / Amend / 09-03-2026 Page 21 extent permitted by law, use by the buyer or any other user constitutes acceptance of the terms under Warranty Disclaimer, Inherent Risks of Use and Limitation, of Remedies.

Warranty Disclaimer Corteva Agriscience warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated on the label when used in strict accordance with the directions, subject to the inherent risks set forth below. To the extent permitted by law, Corteva Agriscience MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER EXPRESS OR IMPLIED WARRANTY.

Inherent Risks of Use It is impossible to eliminate all risks associated with use of this product. Crop injury, lack of performance, or other unintended consequences may result because of such factors as use of the product contrary to label instructions (including conditions noted on the label, such as unfavorable temperatures, soil conditions, etc.), abnormal conditions (such as excessive rainfall, drought, tornadoes, hurricanes), presence of other materials, the manner of application, or other factors, all of which are beyond the control of Corteva Agriscience or the seller. Corteva Agriscience will not be responsible for losses or damages resulting from the use of this product in any manner not specifically directed by Corteva Agriscience. To the extent permitted by law, all such risks associated with non-directed use shall be assumed by buyer and/or user.

Limitation of Remedies To the extent permitted by law, the exclusive remedy for losses or damages resulting from this product (including claims based on contract, negligence, tort, strict liability, or other legal theories), shall be limited to, at Corteva Agriscience's election, one of the following:

Refund of purchase price paid by buyer or user for product bought, or
Replacement of amount of product used.

To the extent permitted by law, Corteva Agriscience shall not be liable for losses or damages resulting from handling or use of this product unless Corteva Agriscience is promptly notified of such loss or damage in writing. To the extent permitted by law, in no case shall Corteva Agriscience be liable for consequential, incidental or special damages or losses.

The terms of the Warranty Disclaimer, Inherent Risks of Use, and this Limitation of Remedies cannot be varied by any written or verbal statements or agreements. No employee or sales agent of Corteva Agriscience or the seller is authorized to vary or exceed the terms of the Warranty Disclaimer or this Limitation of Remedies in any manner.

™®Trademarks of Corteva Agriscience and its affiliated companies

EPA accepted: //___

62 KiB Raw Blame History Unescape Escape

INDAR 75 WSP

62 KiB

Raw Blame History