justin/crop-chem-docs

Fork 0

Files

T

crop-chem-docs-refresh 492c23c9cc monthly refresh: 2026-10-01T07:24Z — bayer=91 epa_ppls=4073

2026-10-01 07:24:35 +00:00

57 KiB

Raw Blame History

NAI-1295-2 HERBICIDE/DEFOLIANT

EPA Reg No: 71711-42
Registrant: NICHINO AMERICA, INC.
Signal word: Danger
Active ingredients: Pyraflufen-ethyl (2.5%)
Label accepted: 2026-09-11
Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/071711-00042-20260911.pdf

September 11, 2026

Bill Berti, Ph.D. Sr. Manager, Regulatory and Scientific Affairs Nichino America Inc. 4550 Linden Hill Road, Suite 501 Wilmington, DE 19808 [email protected]

Subject: Label Amendment - Registration Review Mitigation for Pyraflufen-ethyl Product Name: NAI-1295-2 HERBICIDE/DEFOLIANT EPA Registration Number: 71711-42 Case Number: 482535 Application Dates: December 22, 2020

Dear Bill Berti, Ph.D.:

The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended, has completed reviewing all the information submitted with your application to support the Registration Review of the above referenced product in connection with the Pyraflufen-ethyl Interim Decision, and has concluded that your submission is acceptable. The label referred to above, submitted in connection with registration under FIFRA, as amended, is acceptable.

Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E). 40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In addition, regardless of whether a website is referenced on your product’s label, claims made on the website may not substantially differ from those claims approved through the registration process. Therefore, should the Agency find or if it is brought to our attention that a website contains false or misleading statements or claims substantially differing from the EPA approved registration, the website will be referred to the EPA’s Office of Enforcement and Compliance Assurance.

A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling and must be used at your next label printing. You must

Page 2 of 2 EPA Reg. No. 71711-42 Case No. 482535

submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 12 months from the date of this letter. After 12 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3.

If you have any questions about this letter, please contact DeMariah Cotton by phone at (202)- 566-2288, or via email at [email protected].

S i n c e r e l y ,

Julie Javier, Team Leader Risk Mitigation and Implementation Branch 4 Pesticide Re-Evaluation Division Office of Pesticide Programs

ENCLOSURE: Stamped label

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 1 of 27 PYRAFLUFEN-ETHYL GROUP 14 HERBICIDE NAI-1295-2 Herbicide/Defoliant A Contact Herbicide for Broadleaf Weed Control, Defoliation, and Desiccation Active Ingredient: Pyraflufen ethyl: ethyl 2-chloro-5-(4-chloro-5-difluoromethoxy-1- methyl-1H-pyrazol-3-yl)-4-fluorophenoxyacetate..................................................... 2.5% Other Ingredients*:....................................................................................................... 97.5% Total:..............................................................................................................................................100.0% *contains petroleum distillates, xylene or xylene range aromatic solvents Contains 0.192 lb. pyraflufen ethyl per gallon EPA Reg. No. 71711- 42 EPA Est. No.: KEEP OUT OF REACH OF CHILDREN DANGER - PELIGRO Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand the label, find someone to explain to you in detail.) FIRST AID If in eyes x Immediately hold eye open and rinse slowly and gently with water for 15-20 minutes. x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. x Call a poison control center or doctor for treatment advice If on skin or clothing x Take off contaminated clothing. x Rinse skin immediately with plenty of water for 15-20 minutes. x Call a poison control center or doctor for treatment advice. If swallowed x Call a doctor or poison control center immediately for treatment advice. x Do not give any liquid to the person. x Do not induce vomiting unless told to do so by the poison control center or doctor. x Do not give anything by mouth to an unconscious person. If inhaled x Move person to fresh air. x If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth, if possible. x Call a poison control center or doctor for further treatment advice. HOTLINE NUMBER Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-348-5832 for emergency medical treatment information. In case of fire or spills, information may be obtained by calling 1-800-424-9300. NOTE TO PHYSICIAN Contains petroleum distillates. Vomiting may cause aspiration pneumonia. Probable mucosal damage may contraindicate the use of gastric lavage. Net Contents: _______ Active Ingredient Made in Japan; Formulated and Packaged in U.S.A. Nichino America, Inc. 4550 Linden Hill Road, Suite 501 Wilmington, DE 19808 888-740-7700 Sep 11, 2026 71711-42

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 2 of 27

PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS DANGER - PELIGRO

Corrosive. Causes irreversible eye damage. Do not get in eye, on skin, or on clothing. Wear goggles or face shield when handling. Wash thoroughly with soap and water after handling and before eating, drinking chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.

PERSONAL PROTECTIVE EQUIPMENT (PPE)

Applicators and other handlers must wear:

Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.

User Safety Recommendations Users should: x Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. x Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.

ENGINEERING CONTROLS STATEMENTS When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR 170.240(d)(4-6), the handler PPE requirements may be reduced or modified as specified in the WPS.

ENVIRONMENTAL HAZARDS NON-TARGET ORGANISM ADVISORY: This product is toxic to plants and may adversely impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to the treated site. Protect the forage and habitat of non-target organisms by following label directions intended to minimize spray drift.

This pesticide is toxic to fish and aquatic invertebrates. This product may contaminate water through drift of spray in wind or via runoff events. Use care when applying in areas adjacent to any body of water. Do not apply directly to water, to areas where surface water is present, or to intertidal areas below the mean high water mark. Do not contaminate water when disposing of equipment washwater or rinsate. Do not apply when weather conditions favor drift from treated areas. Do not apply if rainfall is expected within one hour.

x Long-sleeved shirt and long pants x Chemical-resistant gloves made from barrier laminate and/or butyl rubber >14 mils x Shoes plus socks x Protective eyewear x For overhead exposure, wear chemical resistant headgear

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 3 of 27

DIRECTIONS FOR USE It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notification, and emergency assistance. It also contains specific instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.

DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI) of 12 hours.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: x Coveralls x Chemical-resistant gloves made from barrier laminate and/or butyl rubber >14 mils x Shoes plus socks x Protective eyewear

NONAGRICULTURAL USE REQUIREMENTS The requirements in this box apply to uses of this product that are NOT within the scope of the Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies when this product is used to produce agricultural plants on farms, forests, or greenhouses. For other uses, including interiorscapes and other nonagricultural uses, do not enter treated areas without protective clothing until sprays have dried.

USE INFORMATION

NAI-1295-2 Herbicide/Defoliant is designed for use as a contact herbicide for control of annual or perennial herbaceous broadleaf weeds less than 4 inches in height, or rosettes less than 3 inches in diameter. Use the higher rates and spray volumes for control of larger weeds; control may be reduced with weeds larger than 4 inches.

NAI-1295-2 Herbicide/Defoliant must be tank mixed with another foliar active broadleaf herbicide for complete control of most broadleaf weeds. This product requires thorough coverage for effective control.

Use an approved agriculture buffering agent, buffering to less than pH 7.5, if using NAI-1295-2 Herbicide/Defoliant in a water source greater than or equal to pH 7.5. Always buffer the water source BEFORE adding NAI-1295-2 Herbicide/Defoliant to the spray tank.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 4 of 27

Do not apply this product through any type of irrigation system.

NAI-1295-2 Herbicide/Defoliant is rainfast within one hour after application.

ROTATIONAL CROP RESTRICTIONS

Crop/Crop Group Rotational/Plantback Intervals Corn Cotton

Grapes Olives Pome Fruit Crop Group 11 Pomegranates Potatoes Soybeans Stone Fruit Crop Group 12 Tree nuts Crop Group 14 Wheat, Triticale

0 days following application Bulb Vegetables Crop Group 3 Cereal Grains Crop Group 15 (except corn, wheat and Triticale – see 0 day plant back interval above) Cole Crops Crop Group 5 Cucurbits Crop Group 9 Fruiting Vegetables Crop Group 8 Leafy Vegetables Crop Group 4 Legumes Crop Group 6 Oil Seeds Crop Group 20 Root and Tuber Vegetables Crop Group 1 (except potato – see 0 day plant back interval above) Sugarcane

1 day following preplant burndown application All other crops/crop groups, including hops 30 days following application

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 5 of 27

WEEDS CONTROLLED The following broadleaf weed species can be controlled or suppressed up to 4 inches in height or less, or rosettes of 3 inches in diameter or less. Tank mixtures of NAI-1295-2 Herbicide/Defoliant with other labeled broadleaf herbicides may be needed for control of some weed species. Amaranth, Palmer Bedstraw

Beggarweed, Florida Beggartick, hairy Bindweed, field Buckwheat, wild Canola Carpetweed Celery, wild Chickweed Chickweed, common Clover, white

Cocklebur Dandelion, common Dock, curly Dollarweed Eclipta Evening primrose, cutleaf

Geranium, Carolina Henbit Horsenettle (suppression) Knotweed, prostrate Kochia

Ladysthumb Lambsquarters, common Lettuce, prickly Mallow, common Marestail (suppression) Milkthistle Morningglory, species Mustard, wild (suppression) Nettle, stinging Nightshade, black Panicle Willowweed Pigweed, redroot Pigweed, smooth Pineapple weed Poinsettia, wild Poison-ivy Prickly sida (Teaweed) Purslane, common Radish, wild Ragweed, common Ragweed, giant

Redmaid Rocket, London Sesbania, hemp Shepherd’s-purse Sicklepod (suppression) Smartweed, Pennsylvania Smellmelon Sowthistle, annual Spurge, leafy Sunflower, common Thistle, Canada Thistle, Russian Toadflax, Dalmatian Velvetleaf Virginia-creeper Volunteer cotton (Conventional, GMO Varieties)

Waterhemp, tall Waterhemp, common Western tansymustard

WEED RESISTANCE MANAGEMENT For resistance management, NAI-1295-2 Herbicide/Defoliant is a Group 14 herbicide. Any weed population may contain or develop plants naturally resistant to NAI-1295-2 Herbicide/Defoliant and other Group 14 herbicides. The resistant biotypes may dominate the weed population if these herbicides are used repeatedly in the same field. Appropriate resistance-management strategies should be followed.

To delay herbicide resistance take one or more of the following steps:

x Rotate the use of NAI-1295-2 Herbicide/Defo liant or other Group 14 herbicides within a growing season sequence or among growing seasons with different herbicide groups that control the same weeds in a field.

x Use tank mixtures with herbicides from a different group if such use is permitted; where information on resistance in target weed species is available, use the less resistance- prone partner at a rate that will control the target weed(s) equally as well as the more resistance-prone partner. Consult your local extension service or certified crop advisor if you are unsure as to which active ingredient is currently less prone to resistance.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 6 of 27

x Adopt an integrated weed-management program for herbicide use that includes scouting and uses historical information related to herbicide use and crop rotation, and that considers tillage (or other mechanical control methods), cultural (e.g., higher crop seeding rates; precision fertilizer application method and timing to favor the crop and not the weeds), biological (weed-competitive crops or varieties) and other management practices.

x Scout after herbicide application to monitor weed populations for early signs of resistance development. Indicators of possible herbicide resistance include: (1) failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; (2) a spreading patch of non- controlled plants of a particular weed species; (3) surviving plants mixed with controlled individuals of the same species. If resistance is suspected, prevent weed seed production in the affected area by an alternative herbicide from a different group or by a mechanical method such as hoeing or tillage. Prevent movement of resistant weed seeds to other fields by cleaning harvesting and tillage equipment when moving between fields and planting clean seed.

x If a weed pest population continues to progress after treatment with this product, discontinue use of this product, and switch to another management strategy or herbicide with a different mode of action, if available.

x Contact your local extension spec ialist or certified crop advisors for additional pesticide resistance-management and/or integrated weed-management recommendations for specific crops and weed biotypes.

x For further information or to report suspected resistance, contact Nichino America representatives at 888-740-7700.

Suspected herbicide-resistant weeds may be identified by these indicators: x Failure to control a weed species normally controlled by the herbicide at the dose applied, especially if control is achieved on adjacent weeds; x A spreading patch of non-controlled plants of a particular weed species; and x Surviving plants mixed with controlled individuals of the same species.

Contact your local sales representative, certified crop advisor, or extension agent to find out if suspected resistant weeds to this MOA have been found in your region. If resistant biotypes of target weeds have been reported, use the application rates of this product specified for your local conditions. Tank mix products so that there are multiple effective mechanisms of actions for each target weed.

TANK MIXTURES NAI-1295-2 Herbicide/Defoliant may be applied as a tankmix or in sequential application with other harvest aid, fungicide, insecticide or herbicide products. Weather, crop conditions, or the presence of certain weeds, crop damaging insects, or diseases will indicate the inclusion of other pesticides in the defoliation or desiccation application. Apply with grass herbicides if grassy weeds are present.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 7 of 27

Note: It is recommended that the compatibility of NAI-1295-2 Herbicide/Defoliant in any tankmix combination be tested before use. To determine the physical compatibility with other products, use a jar test, as described below.

Using a quart jar, add the proportionate amounts of the products to 1 qt. of water. Add wettable powders and water-dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination remains mixed or can be remixed readily, it is physically compatible. Once compatibility has been proven, use the same procedure for adding required ingredients to the spray tank.

Read and follow all label directions for each tankmix product. Always use in accordance with the most restrictive of label precautions and limitations.

MIXING DIRECTIONS Add ½ to ¾ of the required amount of water to the spray tank. Start agitation. Add the required amount of NAI-1295-2 Herbicide/Defoliant and the remaining amount of water. Mix only as much spray solution as can be sprayed within four hours. Storage and use of the previous day’s spray mix may result in reduced activity.

MANDATORY SPRAY DRIFT MANAGEMENT Aerial Applications: x Do not release spray at a height greater than 10 ft above the vegetative canopy, unless a greater application height is necessary for pilot safety. x Applicators are required to use a fine or coarser droplet size according to the most recent version of the American Society of Agricultural and Biological Engineers Standard 641 (ASABE S641). x If the windspeed is 10 miles per hour or less, applicators must use ½ swath displacement upwind at the downwind edge of the field. When the windspeed is between 11-15 miles per hour, applicators must use ¾ swath displacement upwind at the downwind edge of the field. x Do not apply when wind speeds exceed 15 miles per hour at the application site If the windspeed is greater than 10 mph, the boom length must be 65% or less of the wingspan for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of the rotor diameter for helicopters x Do not apply during temperature inversions. Ground Boom Applications: x User must only apply with the release height recommended by the manufacturer, but no more than 4 feet above the ground or crop canopy. x Applicators are required to use fine or coarser droplet size according to the most recent version of the American Society of Agricultural and Biological Engineers Standard 572 (ASAE S572). x Do not apply when wind speeds exceed 15 miles per hour at the application site. x Do not apply during temperature inversions.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 8 of 27

Boomless Ground Applications: x Applicators are required to use fine or coarser droplet size according to the most recent version of the American Society of Agricultural and Biological Engineers Standard 572 (ASAE S572) for all applications. x Do not apply when wind speeds exceed 15 miles per hour at the application site. x Do not apply during temperature inversions.

SPRAY DRIFT ADVISORIES

THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.

BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.

x IMPORTANCE OF DROPLET SIZE - An effective way to reduce spray drift is to apply large droplets. Use the largest droplets that provide target pest control. While applying larger droplets will reduce spray drift, the potential for drift will be greater if applications are made improperly or under unfavorable environmental conditions.

x Controlling Droplet Size - Ground Boom o Volume - Increasing the spray volume so that larger droplets are produced will reduce spray drift. Use the highest practical spray volume for the application. If a greater spray volume is needed, consider using a nozzle with a higher flow rate. o Pressure - Use the lowest spray pressure recommended for the nozzle to produce the target spray volume and droplet size. o Spray Nozzle - Use a spray nozzle that is designed for the intended application. Consider using nozzles designed to reduce drift.

x Controlling Droplet Size - Aircraft o Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up nozzles. Generally, to reduce fine droplets, orient nozzles parallel with the airflow in flight.

x BOOM HEIGHT - Ground Boom o For ground equipment, the boom should remain level with the crop and have minimal bounce.

x RELEASE HEIGHT - Aircraft o Higher release heights increase the potential for spray drift.

x SHIELDED SPRAYERS o Shielding the boom or individual nozzles can reduce spray drift. Consider using shielded sprayers. Verify that the shields are not interfering with the uniform deposition of the spray on the target area.

x TEMPERATURE AND HUMIDITY o When making applications in hot and dry conditions, use larger droplets to reduce effects of evaporation.

x TEMPERATURE INVERSIONS

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 9 of 27

o Drift potential is high during a temperature inversion. Temperature inversions are characterized by increasing temperature with altitude and are common on nights with limited cloud cover and light to no wind. The presence of an inversion can be indicated by ground fog or by the movement of smoke from a ground source or an aircraft smoke generator. Smoke that layers and moves laterally in a concentrated cloud (under low wind conditions) indicates an inversion, while smoke that moves upward and rapidly dissipates indicates good vertical air mixing. Avoid applications during temperature inversions.

x WIND o Drift potential increases with wind speed. AVOID APPLICATIONS DURING GUSTY WIND CONDITIONS. o Applicators need to be familiar with local wind patterns and terrain that could affect spray drift.

x BOOMLESS GROUND APPLICATIONS o Setting nozzles at the lowest effective height will help to reduce the potential for spray drift.

Sensitive Areas The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g. residential areas, bodies of water, known habitat for threatened or endangered species, nontarget crops) is minimal (e.g. when wind is blowing away from the sensitive areas).

EQUIPMENT CLEANING Do not allow the spray solution to dry in the application equipment. After application and before using the sprayer equipment for any other applications, the sprayer must be thoroughly cleaned. Applicators must ensure proper equipment clean-out for any other products mixed with NAI-1295-2 Herbicide/Defoliant as provided on the other product label(s). Immediately following application, clean all equipment thoroughly with detergent or a spray tank cleaner and water as described below. Should residues of NAI-1295-2 Herbicide/Defoliant remain in inadequately cleaned equipment, they may be released in subsequent applications and cause injury to crops.

Drain sprayer tank, hoses, and spray boom and thoroughly rinse with clean water the inside of the spray tank, sprayer hoses, boom, and nozzles to remove any sediment or residues.
Fill the tank ½ full with clean water, add the appropriate detergent (follow manufacturer’s directions for use). Fill tank to capacity and operate the sprayer with agitation for 15 minutes to flush hoses, boom, and nozzles.
Drain the sprayer tank, lines, and booms. Rinse the tank with clean water and flush through the hoses, boom, and nozzles. Remove and clean spray nozzles, tips, and screens.
Dispose of all cleaning solutions, rinsate, and washwaters in accordance with Federal, state, and local regulations.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 10 of 27

APPLICATION RATE CHART

CORN – (field corn, popcorn, seed corn, corn silage, corn stover) Application Pest Rate/Acre Directions for Use Preplant burndown

Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre x Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. x The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. x Use the higher rate for hard to control weeds x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not apply more than 2.0 fl oz/acre per season prior to planting and/or emergence of crop. x Allow a minimum of 30 days between applications for this use.

At Plant, Before Crop Emergence

Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre x Apply ET Herbicide/Defoliant in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. x Do not apply more than 2.0 fl oz/acre per season at plant and/or emergence of crop. x Allow a minimum of 30 days between applications for this use. x The addition of a spray adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. Postemergence Directed

Listed Broadleaf Weeds

0.5 to 1.0 fl oz/acre x Do not apply postemergence to sweet corn. x Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. x Do not use crop oils or crop oil concentrates for postemergence applications x Can be applied from crop emergence to the V4 growth stage. x Some temporary herbicidal leaf speckling may appear on the crop. This effect is transient and will NOT appear on new growth. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not apply more than 1.0 fl oz per acre per season for this use. x Do not make more than 2 applications per season for this use. x Allow a minimum of 30 days between applications for this use. x Do not harvest corn for silage within 50 days after last application. x Do not harvest corn for grain or stover within 90 days after last application.

CORN (all uses) x Do not apply more than 3.0 fl oz/acre per growing season for all preplant burndown, at plant, preemergence, and postemergence uses. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Use the listed higher rates for hard to control weeds.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 11 of 27

COTTON Application Pest Rate/Acre Directions for Use Preplant burndown, At Plant, Before Crop Emergence Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre x Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. x The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not apply more than 2.0 fl oz per acre per season for this use. x Allow a minimum of 30 days between applications for this use. Post- emergence Listed Broadleaf Weeds

1.0 to 2.0 fl oz/acre x Do NOT apply by air for this use. x Apply to cotton having less than 3 inches of stem bark using hooded ground equipment only. x Avoid contact with desirable vegetation. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not exceed 2.0 fl oz per acre per season for this use. x Allow a minimum of 30 days between applications for this use. x Do not apply within 7 days of harvest. x Use the higher rate for hard to control weeds. Post- emergence Layby Listed Broadleaf Weeds

0.5 to 1.0 fl oz/acre x Do NOT apply by air for this use. x Apply when the cotton has attained an average height of 18 inches or more and having at least 3 inches of stem bark using hooded or postdirected ground spray equipment only. x Avoid contact with desirable vegetation. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not apply more than 1.0 fl oz per acre per season for this use. x Allow a minimum of 30 days between applications for this use. x Do not apply within 7 days of harvest. Defoliation Defoliation of Cotton

1.5 to 2.75 fl oz/acre x Apply when sufficient open bolls (generally greater than 60%) have developed to produce desired yield. x Apply using 20 to 30 gallons of water per acre by ground or 5 gallons of water per acre by air. x Adequate defoliation is generally achieved within 7 to 14 days depending upon weather conditions. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not exceed 2 applications or 5.5 fl oz per acre per season. x Applications must be a minimum of 7 days apart.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 12 of 27

x Do not apply within 7 days of harvest. x May be tank mixed or applied in sequence with other defoliant products such as, but not limited to, Cyclone®, DEF®, Dropp®, ethephon, Finish®, Firstpick®, Folex®, Ginstar®, Gramoxone®, and/or Roundup®. All uses x Do not apply more than 8.5 fl oz per acre per growing season to cotton.

POTATOES Application Pest Rate/Acre Directions for Use Desiccation Potato Foliage and Vines

L isted Broadleaf Weeds

2.75 to 5.5 fl oz/acre x Apply by air at 5 gallons per acre or 20 to 50 gallons per acre by ground equipment. x Apply as a foliar spray in the early stage of crop senescence. x A repeat application of NAI-1295-2 Herbicide/Defoliant or another desiccant may be needed under certain climatic conditions for complete desiccation. x Make 1 to 2 applications at a minimum 7 day interval. x Do not exceed 2 applications or 11.0 fl oz per acre per season for desiccation. x Do not apply within 7 days of harvest. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 13 of 27

SOYBEANS Application Pest Rate/Acre Directions for Use Preplant burndown, At plant, before crop emergence

Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre Ɣ Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. Ɣ The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. Ɣ Use the higher rate for hard to control weeds. Ɣ Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. Ɣ Do not apply more than 2.0 fl oz per acre per season for this use. Ɣ Allow a minimum of 30 days between applications for this use. Postemergence

Listed Broadleaf Weeds

0.4 to 1.0 fl oz/acre Ɣ Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. Ɣ Do not use crop oils or crop oil concentrates for postemergence applications. Ɣ Can be applied from crop emergence to the V6 growth stage. Ɣ Some temporary herbicidal leaf speckling may appear on the crop. This effect is transient and will NOT appear on new growth. Ɣ Use the higher rate for hard to control weeds. Ɣ Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. Ɣ Do not apply more than 1.0 fl oz per acre per season for this use. Ɣ Allow a minimum of 30 days between applications for this use. Ɣ Do not make more than 2 applications per season for this use. Ɣ Do not graze soybean forage or cut for hay within 7 days of last application. Ɣ Do not harvest soybeans for grain within 70 days after last application. SOYBEAN (all uses)

Ɣ Do not apply more than 3.0 fl oz/acre per growing season to soybeans. Ɣ Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. Ɣ Use the higher rate for hard to control weeds.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 14 of 27

WHEAT, TRITICALE Application Pest Rate/Acre Directions for Use Preplant burndown Listed Broadleaf Weeds

Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre Ɣ Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. Ɣ Allow a minimum of 30 days between applications for this use. Ɣ Do not apply more than 2.0 fl oz/acre per season prior to planting and/or emergence of crop. Ɣ The addition of a COC adjuvant at a concentration of 1.0% is recommended for optimum weed control. Ɣ Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. Postemergence Listed Broadleaf Weeds

0.5 to 1.0 fl oz/acre Ɣ Apply in a minimum of 5 gallons spray solution per acre by air or 10 gallons spray solution per acre by ground. Ɣ Use nonionic surfactant at a concentration of 0.5% for optimum weed control. Ɣ Can be applied from crop emergence to the appearance of the flag leaf. DO NOT apply if the flag leaf is visible. Ɣ Some temporary herbicidal leaf speckling may appear on the crop. This effect is transient and will NOT appear on new growth. Ɣ Use the higher rate for hard to control weeds. Ɣ Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. Ɣ Do not apply more than 1.0 fl oz per acre for this use per season. Ɣ Do not apply more than 2 applications per season. Ɣ Allow a minimum of 30 days between applications for this use. Ɣ Do not harvest wheat or triticale for hay within 21 days of last application. Ɣ Do not harvest wheat or triticale for grain within 60 days after last application. WHEAT, TRITICALE All uses x Do not apply more than 3.0 fl oz/acre per growing season for all preplant burndown, at plant, preemergence, and postemergence uses.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 15 of 27

Crop Application Pest Rate/ Acre Directions for Use BULB VEGETABLES (Crop Group 3): garlic, elephant garlic, leek, dry bulb, green and Welch onion, shallot

CEREAL GRAINS (Crop Group 15): barley, buckwheat, corn, pearl and proso millet, oats, popcorn, rice, rye, sorghum, teosinte, triticale, wheat, wild rice

COLE (BRASSICA) CROPS (Crop Group 5): broccoli, Chinese broccoli, broccoli raab, Brussels sprouts, cabbage, Chinese cabbage both bok choy and napa, Chinese mustard cabbage, cauliflower, cavalo broccolo, collards, kale, kohlrabi, mizuna, mustard greens, mustard spinach, rape greens

CUCURBITS (Crop Group 9): chayote, Chinese waxgourd, citron melon, cucumber, gherkin, edible gourd, balsam apple, balsam pear, bitter melon, Chinese cucumber, muskmelons including cantaloupe, casaba, crenshaw melon, golden perhsaw Pre-plant Burndown

Listed Broadleaf Weeds 0.5 to 2.0 fl oz/acre x Apply in a minimum of 10 gallons spray solution per acre by ground or 5 gallons water per acre by air. x The addition of nonionic surfactant at a concentration of 0.25% or COC at 1.0% is recommended for optimum weed control. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not exceed 3 applications or 5.5 fl oz per acre per season. x Allow a minimum of 30 days between applications for this use.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 16 of 27

melon, honeydew melon, honey balls, mango melon, Persian melon, pineapple melon, Santa Claus melon, and snake melon, pumpkin, winter and summer squash species, watermelon

FRUITING VEGETABLES (Crop Group 8): eggplant, ground cherry, pepino, pepper, including bell pepper, chili pepper, cooking pepper, pimento, sweet pepper, tomatillo, tomato

L EAFY VEGETABLES (Crop Group 4): amaranth, arugula, cardoon, celery, Chinese celery, celtuce, chervil, edible -leaved chrysanthemum, corn salad, garden cress, upland cress, dandelion, dock, endive, fennel, lettuce, orach, parsley, purslane, radicchio, rhubarb, spinach, swiss chard

LEGUME VEGETABLES (Crop Group 6): beans, including grain lupin, sweet lupin, white lupin, and white sweet lupin, field bean, kidney bean, lima bean, navy bean, pinto bean, runner bean, snap bean, Tepary bean, wax

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 17 of 27

bean, adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea, moth bean, mung bean, rice bean, southern pea, urd bean, broadbean, yard

long bean, broad bean, chickpea, guar, Jackbean, Lablab bean, lentil, dwarf pea, edible podded pea, English pea, field pea, garden pea, green pea, snow pea, sugar snap pea, pigeon pea, soybean, sword bean

OIL SEED CROPS (Crop Group 20): borage, calendula, castor oil plant, Chinese tallowtree, cottonseed, crambe, cuphea, echium, euphorbia, evening primrose, flax seed, gold of pleasure, Hare’s ear mustard, jojoba, lesquerella, lunaria, meadowfoam, milkweed, mustard seen, niger seed, oil radish, poppy seed, rapeseed [canola], rose hip, safflower, sunflower, sesame, stokes aster, sweet rocket, tallowwood, tea oil plant, and vernonia

ROOT AND TUBER VEGETABLES (Crop Group 1): arracacha, arrowroot, Chinese and Jerusalem artichoke, garden

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 18 of 27

beet, sugar beet, edible burdock, edible canna, carrot, bitter cassava, sweet cassava, celeriac, chayote, chervil, chicory, chufa, dasheen, ginger, ginseng, horseradish, leren, parsley, parsnip, potato, radish, daikon, rutabaga, salsify, skirret, sweet potato, tanier, turmeric, turnip, yam bean, true yam

SUGARCANE

Crop Application Pest Rate/Acre Maximum Applications Rate/Year Directions for Use GRAPES (bearing and nonbearing)

OLIVE TREES (bearing and nonbearing)

POMEGRANATES (bearing and nonbearing)

POME FRUIT (Crop Group 11) (bearing and nonbearing) apple, crabapple, loquat, mayhaw, pear, pear (oriental), quince

STONE FRUIT (Crop Group 12) (bearing and nonbearing) apricot, cherry (sweet and tart), nectarine, peach, plum (including chickasaw plum, damson plum, and Japanese plum), plumcot, prune

Post- harvest, Dormant, Prebloom Listed Broadle af Weeds 0.8 to 3.25 fl oz/acre Do not exceed 3 applications or 5.5 fl oz per acre per season for these uses.

x Do not apply by air for this use. x Apply in a minimum of 20 gallons spray solution per acre by ground equipment to target weeds and sucker growth. x The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. x Do not allow spray to drift onto desirable fruit, foliage or vines, as damage will occur. x Avoid contact with green, uncallused bark of young vines established less than one year, unless protected Sucker Manage ment

3.25 fl oz/acre In-Season Listed Broadle af Weeds 0.8 to 3.25 fl oz/acre Do not exceed 2 applications or 5.5 fl oz per acre per season for these uses. Sucker Manage ment 3.25 fl oz/acre

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 19 of 27

TREE NUT (Crop Group 14) (bearing and nonbearing) almond, beech nut, Brazil nut, butternut, cashew, chestnut, chinquapin, filbert (hazelnut), macadamia nut, pecan, pistachio, walnut (black and English)

from spray contact by non-porous wraps, grow tubes, or waxed containers. x Use the higher rate for hard to control weeds. x Allow a minimum of 30 days between applications for this use. x For the management of undesirable sucker growth on the basal portion of trunks, root sprouts and vine trunks. Growth must be controlled when the tissue is young, immature and/or not hardened off. Note: For use in California for sucker management only on Grapes, Stone Fruit, Pome Fruit and Pomegranates. Not for use in California for sucker management on Olive Trees and Tree Nuts.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 20 of 27

Crop Application Pest Rate/Acre Maximum Applications Rate/Year Directions for Use DATES, FEIJOA, FIGS, KIWI FRUIT, MANGO, PERSIMMON (bearing and nonbearing)

Post- harvest, Dormant, Prebloom

Listed Broadleaf Weeds

0.8 to 3.25 fl oz/acre

Do not exceed 3 applications per season for th is use.

x Do not exceed 5.5 fl oz per acre per season for all post- harvest, dormant, and prebloom applications combined. x Do not apply by air for this use. x Apply in a minimum of 20 gallons spray solution per acre by ground equipment to target weeds and sucker growth. x The addition of a COC adjuvant at a concentration of 1.0% is recommended for optimum weed control. x Do not allow spray to drift onto desirable fruit, foliage or vines/trees, as damage will occur. x Avoid contact with green, uncallused bark of young trees/vines, established less than one year, unless protected from spray contact by non-porous wraps, grow tubes, or waxed containers. x Use the higher rate for hard to control weeds. x Allow a minimum of 30 days between applications for this use. x For the management of undesirable sucker growth on the basal Sucker Management (Not for sucker management use on these crops in California)

2.5 to 3.25 fl oz/acre Do not exceed 2 applications per season for this use.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 21 of 27

portion of trunks, root sprouts and tree/vine trunks. Growth must be controlled when the tissue is young, immature and/or not hardened off.

Crop Application Pest Rate/Acre Maximum Applications Rate/Year Directions for Use DATES, FEIJOA, FIGS, KIWI FRUIT, MANGO, PERSIMMON

(Nonbearing only) In-Season

Listed Broadleaf Weeds

0.8 to 3.25 fl oz/acre

Do not exceed a combined total of 2

applications per season for these uses. x Do not exceed 5.5 fl oz per acre per season for all in season applications combined. x Do not apply by air for this use. x Apply in a minimum of

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 22 of 27

Sucker Management (Not for sucker management use on these crops in California)

2.5 to 3.25 fl oz/acre 20 gallons spray solution per acre by ground equipment to target weeds and sucker growth. x The addition of a COC adjuvant at a concentration of 1.0% is recommended for optimum weed control. x Do not allow spray to drift onto desirable fruit, foliage, vines or trees, as damage will occur. x Avoid contact with green, uncallused bark of young trees or vines, established less than one year, unless protected from spray contact by non-porous wraps, grow tubes, or waxed containers. x Use the higher rate for hard to control weeds. x Allow a minimum of 30 days between applications. x For the management of undesirable sucker growth on the basal portion of trunks, root sprouts and tree/vine trunks. Growth must be controlled when the tissue is young, imm ature and/or not hardened off.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 23 of 27

Crop Application Pest Rate/Acre Maximum Applications Rate/Year Directions for Use Nonbearing tree fruit, Nut trees and Vine crops (Excluding citrus) Full season weed control Listed broadleaf weeds

0.5 to 2.0 fl oz/acre x Do not apply by air for this use. x Apply in a minimum of 20 gallons spray solution per acre by ground equipment to target weeds and sucker growth. x Do not make more than 3 applications or exceed 5.5 fl oz per acre during the growing season. x The addition of a COC adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. x Do not allow spray to drift onto desirable fruit, foliage, vines or trees, as damage will occur. x Use the higher rate for hard to control weeds. x Allow a minimum of 30 days between applications. x For crops not listed on this label, do not harvest edible crops for 12 months following the last application.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 24 of 27

PREPLANT BURNDOWN FALLOW BED AND CROP STUBBLE Pest Rate/Acre Directions for Use Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre x Apply in a minimum of 5 gallons spray solution by air and 10 gallons per acre by ground. x The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is recommended for optimum weed control. x Use the higher rate for hard to control weeds. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Do not make more than 3 applications or exceed 5.5 fl oz per acre during the fallow period. x Allow a minimum of 30 days between applications for this use.

NON-CROPLAND, UNCULTIVATED AGRICULTURAL AREAS, CONSERVATION RESERVE PROGRAM LAND/FEDERAL SET-ASIDE ACREAGE* (NON FOOD PRODUCING) Pest Rate/Acre Directions for Use Listed Broadleaf Weeds

0.5 to 2.0 fl oz/acre x Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 5 gallons of spray solutionper acre by air or 10 gallons spray solution per acre by ground. x Allow a minimum of 30 days between applications for this use. x Do not make more than 3 applications or exceed 5.5 fl oz/acre during the fallow period. x The addition of a COC adjuvant at a concentration of 1.0% is recommended for optimum weed control. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions.

x Use the higher rate for hard to control weeds. *Follow federal, state and local rules for use on grass and hay.

NONCROP WEED CONTROL: AIRPORTS AND AIRFIELDS, COMMERCIAL PLANTS, STORAGE AND LUMBER YARDS, FENCELINES AND FENCE ROWS, FARMYARDS AND FARM BUILDINGS, BARRIER STRIPS AND FIREBREAKS, EQUIPMENT AREAS, NURSERIES AND ORNAMENTAL PLANTINGS, CHRISTMAS TREES AND CONIFER PLANTATION SITE PREPARATION, RAILROADS, ROADSIDE AND UTILITY RIGHTS-OF-WAY, FUEL TANK FARMS AND PUMPING STATIONS, DRY DITCHES AND DITCHBANKS, VACANT LOTS, OR OTHER LISTED AGRICULTURAL AND INDUSTRIAL NON-CROP SITES

Pest Rate/Acre Directions for Use Listed Broadleaf Weeds

0.5 to 2.75 fl oz/acre x Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 20 to 40 gallons spray solution per acre by ground. x Do not apply by air for this use. x Avoid contact with desirable vegetation. x The addition of a COC adjuvant at a concentration of 1.0% is recommended for optimum weed control. x Do not make more than 3 applications or exceed 9.7 fl oz/acre per season using ground or backpack or similar spray equipment. x Use the higher rate for hard to control weeds. x For applications to ornamental plantings, do not allow people (other than the applicator) or pets on treatment area during the application and until sprays have dried.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 25 of 27

ESTABLISHED ORNAMENTAL TURF LAWNS (RESIDENTIAL, INDUSTRIAL, AND INSTITUTIONAL) PARKS, CEMETERIES, ATHLETIC FIELDS, GOLF COURSES (FAIRWAYS, APRONS, TEES, AND ROUGHS), SOD FARMS, AND SIMILAR TURF AREAS

For applications to ornamental turf, do not allow people (other than the applicator) or pets on treatment area during the application and until sprays have dried.

Spray Concentrate Make an appropriate amount of spray concentrate for the area to be treated by adding 8 fl oz of ET Herbicide/Defoliant to 120 fl oz of water (e.g., 1 fl oz ET Herbicide/Defoliant to 15 fl oz water, or 0.5 fl oz ET Herbicide/Defoliant to 7.5 fl oz water). Use the appropriate amount of concentrate as specified in the dosage tables below for application by pressure (pump-up) sprayer, hose-end applicator, or similar application equipment.

Spot treatment: Pressure sprayer (Pump-up Sprayer) Adjust spray nozzle to give coarse spray. Aim at center of weed and spray to wet. A repeat application may be required for hard-to-kill broadleaf weeds. Do not use a hose-end sprayer for spot treatments.

Turf Species Amount of Spray Concentrate (fl oz) Amount of water to be applied (gallons) Area treated (square feet) Cool season grasses: bluegrass, fescue, ryegrass Warm season grasses: bahiagrass, common bermudagrass, centipedegrass, St. Augustine grass, zoysia grass 1.0 4 1000 0.5 2 500

Entire lawn: Dial Type Hose-End Sprayer Spray lawn using coarse spray. Apply evenly over area to be treated. One application should be sufficient. Effects begin to show after 24 to 48 hours with plant death occurring within 7 to 14 days.

Measure the total square footage area to be sprayed. To determine the total square foot area, multiply the length by the width of the lawn area to be treated. Subtract square footage of non-treatment areas including flower beds, shrub beds, driveways and sidewalks.
The application rate of this product is indicated in the following table for every per 1,000 square feet of lawn area. Add the appropriate amount of this product to the spray bottle, [jar], [reservoir], as indicated in the table for every 1,000 sq. ft. of lawn area to be treated.
Set the dial to the correct fluid ounce setting mix rate indicated in the following table.
Connect the hose, turn on water and spray evenly over the lawn treatment area.
Monitor the spray solution level in the spray bottle, [jar]. [reservoir], to gauge coverage.

Turf Species Area to be Treated (square feet) Amount of spray concentrate (fluid ounces) Dial-type Hose-end sprayer mix setting (fl oz per gallon) Cool season grasses: bluegrass, fescue, ryegrass 1000 1.0 2.0 fl oz 5000 5.0 8000 8.0

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 26 of 27

Broadcast Application: Spray using coarse spray. Apply evenly over area to be treated. Turf Species Amount of Spray Concentrate (fluid ounces) Area treated (square feet) Cool season grasses: bluegrass, fescue, ryegrass Warm season grasses: bahiagrass, common; bermudagrass; centipedegrass; St Augustine grass; zoysia grass 1.0 1000 5.0 5000 8.0 8000

PASTURE AND RANGELAND Pest Rate/Acre Directions for Use Listed Broadleaf Weeds

0.75 to 2.25 fl oz/acre x Allow a minimum of 14 days between applications for this use. x Do not make more than 2 applications or exceed 5.5 fl oz/acre per season for this use. x Livestock may graze treated areas as soon a the spray solution has dried on the foliage. x The addition of a crop oil or spray tank adjuvant at a concentration of 0.5% to 1.0% is recommended for optimum weed control. x Refer to “Rotational Crop Restrictions” table above for crop rotations/plantback restrictions. x Apply in a minimum of 2 gallons water per acre by air or 10 gallons water per acre by ground for this application. x Use the higher rate for hard to control weeds.

STORAGE AND DISPOSAL DO NOT contaminate water, food, or feed by storage or disposal. Open dumping is prohibited. Pesticide Storage: Store in a cool place. Pesticide Disposal: Pesticide wastes are toxic. Improper disposal of excess pesticide, pesticide spray or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance. Container Disposal: Nonrefillable container. DO NOT reuse or refill this container. Triple rinse (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by State or local authorities, by burning. If burned, stay out of smoke.

IMPORTANT: READ BEFORE USE By using this product, user or buyer accepts the following conditions, warranty, disclaimer of warranties, and limitations of liability. CONDITIONS: The directions for use of this product are believed to be accurate and must be followed carefully. However, because of extreme weather and soil conditions, use methods and other factors beyond the control of Nichino Americ a, Inc. (NAI), it is impossible for NAI to eliminate all risks associated with the use of this product. As a result, crop injury or ineffectiveness is always possible. To the extent co nsistent with applicable law, all such risks are assumed by the user or buyer.

{NAI-1295-2 71711-42} MAS-513-2 08202021-2 Page 27 of 27

DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE STATEMENTS MADE ON THIS LABEL. No agent of NAI is authorized to make any warranties beyond those contained herein or to modify the warranties contained herein. To the extent consistent with applicable law, NAI disclaims an y liability whatsoever for incidental or consequential damages, including, but not limited to , liability arising out of breach of contract, express or implied warranty (including warranties of merchantability and fitness for a particular purpose), tort, negligence, strict liability, or otherwise. LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID, OR AT THE ELECTION OF NICHINO AMERICA, THE REPLACEMENT OF PRODUCT.

Cottonquik ® is a trademark of duPont Corporation. Cyclone®, and Gramoxone®, are trademarks of Syngenta Crop Protection. DEF ® 6, Dropp ® 50WP, Finish ® , Ginstar ®, and Prep™ are trademarks of Bayer Crop Science. Roundup ® is a trademark of Monstanto Company. Folex ® 6EC is a trademark of Amvac.

57 KiB Raw Blame History Unescape Escape

NAI-1295-2 HERBICIDE/DEFOLIANT

bean, adzuki bean, asparagus bean, blackeyed pea, catjang, Chinese longbean, cowpea, Crowder pea, moth bean, mung bean, rice bean, southern pea, urd bean, broadbean, yard

57 KiB

Raw Blame History