Files
crop-chem-docs/corpus/epa_ppls/71711-42.md
T

1883 lines
57 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# NAI-1295-2 HERBICIDE/DEFOLIANT
- EPA Reg No: **71711-42**
- Registrant: NICHINO AMERICA, INC.
- Signal word: Danger
- Active ingredients: Pyraflufen-ethyl (2.5%)
- Label accepted: 2026-09-11
- Source PDF: https://www3.epa.gov/pesticides/chem_search/ppls/071711-00042-20260911.pdf
---
September 11, 2026
Bill Berti, Ph.D.
Sr. Manager, Regulatory and Scientific Affairs
Nichino America Inc.
4550 Linden Hill Road, Suite 501
Wilmington, DE 19808
bberti@nichino.net
Subject: Label Amendment - Registration Review Mitigation for Pyraflufen-ethyl
Product Name: NAI-1295-2 HERBICIDE/DEFOLIANT
EPA Registration Number: 71711-42
Case Number: 482535
Application Dates: December 22, 2020
Dear Bill Berti, Ph.D.:
The Agency, in accordance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA),
as amended, has completed reviewing all the information submitted with your application to
support the Registration Review of the above referenced product in connection with the
Pyraflufen-ethyl Interim Decision, and has concluded that your submission is acceptable. The
label referred to above, submitted in connection with registration under FIFRA, as amended, is
acceptable.
Should you wish to add/retain a reference to the company’s website on your label, then please
be aware that the website becomes labeling under the Federal Insecticide, Fungicide, and
Rodenticide Act and is subject to review by the Agency. If the website is false or misleading, the
product would be misbranded and unlawful to sell or distribute under FIFRA section 12(a)(1)(E).
40 CFR 156.10(a)(5) list examples of statements EPA may consider false or misleading. In
addition, regardless of whether a website is referenced on your product’s label, claims made on
the website may not substantially differ from those claims approved through the registration
process. Therefore, should the Agency find or if it is brought to our attention that a website
contains false or misleading statements or claims substantially differing from the EPA approved
registration, the website will be referred to the EPA’s Office of Enforcement and Compliance
Assurance.
A stamped copy of your labeling is enclosed for your records. This labeling supersedes
all previously accepted labeling and must be used at your next label printing. You must
Page 2 of 2
EPA Reg. No. 71711-42
Case No. 482535
submit one copy of the final printed labeling before you release the product for
shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may
distribute or sell this product under the previously approved labeling for 12 months
from the date of this letter. After 12 months, you may only distribute or sell this
product if it bears this new revised labeling or subsequently approved labeling. “To
distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation
at 40 CFR 152.3.
If you have any questions about this letter, please contact DeMariah Cotton by phone at (202)-
566-2288, or via email at cotton.demariah@epa.gov.
S i n c e r e l y ,
Julie Javier, Team Leader
Risk Mitigation and Implementation Branch 4
Pesticide Re-Evaluation Division
Office of Pesticide Programs
ENCLOSURE: Stamped label
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 1 of 27
PYRAFLUFEN-ETHYL GROUP 14 HERBICIDE
NAI-1295-2 Herbicide/Defoliant
A Contact Herbicide for Broadleaf Weed Control, Defoliation, and Desiccation
Active Ingredient:
Pyraflufen ethyl: ethyl 2-chloro-5-(4-chloro-5-difluoromethoxy-1-
methyl-1H-pyrazol-3-yl)-4-fluorophenoxyacetate..................................................... 2.5%
Other Ingredients*:....................................................................................................... 97.5%
Total:..............................................................................................................................................100.0%
*contains petroleum distillates, xylene or xylene range aromatic solvents
Contains 0.192 lb. pyraflufen ethyl per gallon
EPA Reg. No. 71711- 42 EPA Est. No.:
KEEP OUT OF REACH OF CHILDREN
DANGER - PELIGRO
Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle.
(If you do not understand the label, find someone to explain to you in detail.)
FIRST AID
If in eyes x Immediately hold eye open and rinse slowly and gently with water for 15-20 minutes.
x Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye.
x Call a poison control center or doctor for treatment advice
If on skin
or clothing
x Take off contaminated clothing.
x Rinse skin immediately with plenty of water for 15-20 minutes.
x Call a poison control center or doctor for treatment advice.
If swallowed x Call a doctor or poison control center immediately for treatment advice.
x Do not give any liquid to the person.
x Do not induce vomiting unless told to do so by the poison control center or doctor.
x Do not give anything by mouth to an unconscious person.
If inhaled x Move person to fresh air.
x If person is not breathing, call 911 or an ambulance, then give artificial respiration,
preferably mouth-to-mouth, if possible.
x Call a poison control center or doctor for further treatment advice.
HOTLINE NUMBER
Have the product container or label with you when calling a poison control center or doctor, or going for
treatment. You may also contact 1-800-348-5832 for emergency medical treatment information. In case
of fire or spills, information may be obtained by calling 1-800-424-9300.
NOTE TO PHYSICIAN
Contains petroleum distillates. Vomiting may cause aspiration pneumonia. Probable mucosal damage
may contraindicate the use of gastric lavage.
Net Contents: _______
Active Ingredient Made in Japan; Formulated and Packaged in U.S.A.
Nichino America, Inc.
4550 Linden Hill Road, Suite 501
Wilmington, DE 19808
888-740-7700
Sep 11, 2026
71711-42
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 2 of 27
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
DANGER - PELIGRO
Corrosive. Causes irreversible eye damage. Do not get in eye, on skin, or on clothing. Wear
goggles or face shield when handling. Wash thoroughly with soap and water after handling and
before eating, drinking chewing gum, using tobacco or using the toilet. Remove and wash
contaminated clothing before reuse.
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Applicators and other handlers must wear:
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for
washables exist, use detergent and hot water. Keep and wash PPE separately from other
laundry. When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets
the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40
CFR 170.240 (d) (4-6)], the handler PPE requirements may be reduced or modified as specified
in the WPS.
User Safety Recommendations
Users should:
x Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
x Remove clothing immediately if pesticide gets inside. Then wash thoroughly and put on
clean clothing.
ENGINEERING CONTROLS STATEMENTS
When handlers use closed systems, enclosed cabs, or aircraft in a manner that meets the
requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides (40 CFR
170.240(d)(4-6), the handler PPE requirements may be reduced or modified as specified in the
WPS.
ENVIRONMENTAL HAZARDS
NON-TARGET ORGANISM ADVISORY: This product is toxic to plants and may adversely
impact the forage and habitat of non-target organisms, including pollinators, in areas adjacent to
the treated site. Protect the forage and habitat of non-target organisms by following label
directions intended to minimize spray drift.
This pesticide is toxic to fish and aquatic invertebrates. This product may contaminate water
through drift of spray in wind or via runoff events. Use care when applying in areas adjacent to
any body of water. Do not apply directly to water, to areas where surface water is present, or to
intertidal areas below the mean high water mark. Do not contaminate water when disposing of
equipment washwater or rinsate. Do not apply when weather conditions favor drift from treated
areas. Do not apply if rainfall is expected within one hour.
x Long-sleeved shirt and long pants
x Chemical-resistant gloves made from barrier laminate and/or butyl rubber >14 mils
x Shoes plus socks
x Protective eyewear
x For overhead exposure, wear chemical resistant headgear
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 3 of 27
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its
labeling.
DO NOT apply this product in a way that will contact workers or other persons, either directly or
through drift. Only protected handlers may be in the area during application. For any
requirements specific to your State or Tribe, consult the agency responsible for pesticide
regulation.
AGRICULTURAL USE REQUIREMENTS
Use this product only in accordance with its labeling and with the Worker Protection Standard,
40 CFR Part 170. This Standard contains requirements for the protection of agricultural workers
on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It
contains requirements for training, decontamination, notification, and emergency assistance. It
also contains specific instructions and exceptions pertaining to the statements on this label
about personal protective equipment (PPE) and restricted-entry interval. The requirements in
this box only apply to uses of this product that are covered by the Worker Protection Standard.
DO NOT enter or allow worker entry into treated areas during the restricted entry interval (REI)
of 12 hours.
PPE required for early entry to treated areas that is permitted under the Worker Protection
Standard and that involves contact with anything that has been treated, such as plants, soil, or
water, is:
x Coveralls
x Chemical-resistant gloves made from barrier laminate and/or butyl rubber >14 mils
x Shoes plus socks
x Protective eyewear
NONAGRICULTURAL USE REQUIREMENTS
The requirements in this box apply to uses of this product that are NOT within the scope of the
Worker Protection Standard for agricultural pesticides (40 CFR Part 170). The WPS applies
when this product is used to produce agricultural plants on farms, forests, or greenhouses. For
other uses, including interiorscapes and other nonagricultural uses, do not enter treated areas
without protective clothing until sprays have dried.
USE INFORMATION
NAI-1295-2 Herbicide/Defoliant is designed for use as a contact herbicide for control of annual
or perennial herbaceous broadleaf weeds less than 4 inches in height, or rosettes less than 3
inches in diameter. Use the higher rates and spray volumes for control of larger weeds; control
may be reduced with weeds larger than 4 inches.
NAI-1295-2 Herbicide/Defoliant must be tank mixed with another foliar active broadleaf
herbicide for complete control of most broadleaf weeds. This product requires thorough
coverage for effective control.
Use an approved agriculture buffering agent, buffering to less than pH 7.5, if using NAI-1295-2
Herbicide/Defoliant in a water source greater than or equal to pH 7.5. Always buffer the water
source BEFORE adding NAI-1295-2 Herbicide/Defoliant to the spray tank.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 4 of 27
Do not apply this product through any type of irrigation system.
NAI-1295-2 Herbicide/Defoliant is rainfast within one hour after application.
ROTATIONAL CROP RESTRICTIONS
Crop/Crop Group Rotational/Plantback Intervals
Corn
Cotton
Grapes
Olives
Pome Fruit Crop Group 11
Pomegranates
Potatoes
Soybeans
Stone Fruit Crop Group 12
Tree nuts Crop Group 14
Wheat, Triticale
0 days following application
Bulb Vegetables Crop Group 3
Cereal Grains Crop Group 15 (except corn,
wheat and Triticale – see 0 day plant back
interval above)
Cole Crops Crop Group 5
Cucurbits Crop Group 9
Fruiting Vegetables Crop Group 8
Leafy Vegetables Crop Group 4
Legumes Crop Group 6
Oil Seeds Crop Group 20
Root and Tuber Vegetables Crop Group 1
(except potato – see 0 day plant back interval
above)
Sugarcane
1 day following preplant burndown application
All other crops/crop groups, including hops 30 days following application
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 5 of 27
WEEDS CONTROLLED
The following broadleaf weed species can be controlled or suppressed up to 4 inches in height
or less, or rosettes of 3 inches in diameter or less. Tank mixtures of NAI-1295-2
Herbicide/Defoliant with other labeled broadleaf herbicides may be needed for control of some
weed species.
Amaranth, Palmer
Bedstraw
Beggarweed, Florida
Beggartick, hairy
Bindweed, field
Buckwheat, wild
Canola
Carpetweed
Celery, wild
Chickweed
Chickweed, common
Clover, white
Cocklebur
Dandelion, common
Dock, curly
Dollarweed
Eclipta
Evening primrose,
cutleaf
Geranium, Carolina
Henbit
Horsenettle
(suppression)
Knotweed, prostrate
Kochia
Ladysthumb
Lambsquarters, common
Lettuce, prickly
Mallow, common
Marestail (suppression)
Milkthistle
Morningglory, species
Mustard, wild (suppression)
Nettle, stinging
Nightshade, black
Panicle Willowweed
Pigweed, redroot
Pigweed, smooth
Pineapple weed
Poinsettia, wild
Poison-ivy
Prickly sida (Teaweed)
Purslane, common
Radish, wild
Ragweed, common
Ragweed, giant
Redmaid
Rocket, London
Sesbania, hemp
Shepherd’s-purse
Sicklepod (suppression)
Smartweed, Pennsylvania
Smellmelon
Sowthistle, annual
Spurge, leafy
Sunflower, common
Thistle, Canada
Thistle, Russian
Toadflax, Dalmatian
Velvetleaf
Virginia-creeper
Volunteer cotton (Conventional,
GMO Varieties)
Waterhemp, tall
Waterhemp, common
Western tansymustard
WEED RESISTANCE MANAGEMENT
For resistance management, NAI-1295-2 Herbicide/Defoliant is a Group 14 herbicide. Any weed
population may contain or develop plants naturally resistant to NAI-1295-2 Herbicide/Defoliant
and other Group 14 herbicides. The resistant biotypes may dominate the weed population if
these herbicides are used repeatedly in the same field. Appropriate resistance-management
strategies should be followed.
To delay herbicide resistance take one or more of the following steps:
x Rotate the use of NAI-1295-2 Herbicide/Defo liant or other Group 14 herbicides within a
growing season sequence or among growing seasons with different herbicide groups
that control the same weeds in a field.
x Use tank mixtures with herbicides from a different group if such use is permitted; where
information on resistance in target weed species is available, use the less resistance-
prone partner at a rate that will control the target weed(s) equally as well as the more
resistance-prone partner. Consult your local extension service or certified crop advisor if
you are unsure as to which active ingredient is currently less prone to resistance.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 6 of 27
x Adopt an integrated weed-management program for herbicide use that includes scouting
and uses historical information related to herbicide use and crop rotation, and that
considers tillage (or other mechanical control methods), cultural (e.g., higher crop
seeding rates; precision fertilizer application method and timing to favor the crop and not
the weeds), biological (weed-competitive crops or varieties) and other management
practices.
x Scout after herbicide application to monitor weed populations for early signs of
resistance development. Indicators of possible herbicide resistance include: (1) failure to
control a weed species normally controlled by the herbicide at the dose applied,
especially if control is achieved on adjacent weeds; (2) a spreading patch of non-
controlled plants of a particular weed species; (3) surviving plants mixed with controlled
individuals of the same species. If resistance is suspected, prevent weed seed
production in the affected area by an alternative herbicide from a different group or by a
mechanical method such as hoeing or tillage. Prevent movement of resistant weed
seeds to other fields by cleaning harvesting and tillage equipment when moving between
fields and planting clean seed.
x If a weed pest population continues to progress after treatment with this product,
discontinue use of this product, and switch to another management strategy or herbicide
with a different mode of action, if available.
x Contact your local extension spec ialist or certified crop advisors for additional pesticide
resistance-management and/or integrated weed-management recommendations for
specific crops and weed biotypes.
x For further information or to report suspected resistance, contact Nichino America
representatives at 888-740-7700.
Suspected herbicide-resistant weeds may be identified by these indicators:
x Failure to control a weed species normally controlled by the herbicide at the dose
applied, especially if control is achieved on adjacent weeds;
x A spreading patch of non-controlled plants of a particular weed species; and
x Surviving plants mixed with controlled individuals of the same species.
Contact your local sales representative, certified crop advisor, or extension agent to find out if
suspected resistant weeds to this MOA have been found in your region. If resistant biotypes of
target weeds have been reported, use the application rates of this product specified for your
local conditions. Tank mix products so that there are multiple effective mechanisms of actions
for each target weed.
TANK MIXTURES
NAI-1295-2 Herbicide/Defoliant may be applied as a tankmix or in sequential application with
other harvest aid, fungicide, insecticide or herbicide products. Weather, crop conditions, or the
presence of certain weeds, crop damaging insects, or diseases will indicate the inclusion of
other pesticides in the defoliation or desiccation application. Apply with grass herbicides if
grassy weeds are present.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 7 of 27
Note: It is recommended that the compatibility of NAI-1295-2 Herbicide/Defoliant in any
tankmix combination be tested before use. To determine the physical compatibility with other
products, use a jar test, as described below.
Using a quart jar, add the proportionate amounts of the products to 1 qt. of water. Add wettable
powders and water-dispersible granular products first, then liquid flowables, and emulsifiable
concentrates last. After thoroughly mixing, let stand for at least 5 minutes. If the combination
remains mixed or can be remixed readily, it is physically compatible. Once compatibility has
been proven, use the same procedure for adding required ingredients to the spray tank.
Read and follow all label directions for each tankmix product. Always use in accordance
with the most restrictive of label precautions and limitations.
MIXING DIRECTIONS
Add ½ to ¾ of the required amount of water to the spray tank. Start agitation. Add the required
amount of NAI-1295-2 Herbicide/Defoliant and the remaining amount of water. Mix only as
much spray solution as can be sprayed within four hours. Storage and use of the previous
day’s spray mix may result in reduced activity.
Use an approved agriculture buffering agent, buffering to less than pH 7.5, if using NAI-1295-2
Herbicide/Defoliant in a water source greater than or equal to pH 7.5. Always buffer the water
source BEFORE adding NAI-1295-2 Herbicide/Defoliant to the spray tank.
MANDATORY SPRAY DRIFT MANAGEMENT
Aerial Applications:
x Do not release spray at a height greater than 10 ft above the vegetative canopy, unless a
greater application height is necessary for pilot safety.
x Applicators are required to use a fine or coarser droplet size according to the most recent
version of the American Society of Agricultural and Biological Engineers Standard 641
(ASABE S641).
x If the windspeed is 10 miles per hour or less, applicators must use ½ swath displacement
upwind at the downwind edge of the field. When the windspeed is between 11-15 miles per
hour, applicators must use ¾ swath displacement upwind at the downwind edge of the field.
x Do not apply when wind speeds exceed 15 miles per hour at the application site If the
windspeed is greater than 10 mph, the boom length must be 65% or less of the wingspan
for fixed wing aircraft and 75% or less of the rotor diameter for helicopters. Otherwise, the
boom length must be 75% or less of the wingspan for fixed-wing aircraft and 90% or less of
the rotor diameter for helicopters
x Do not apply during temperature inversions.
Ground Boom Applications:
x User must only apply with the release height recommended by the manufacturer, but no
more than 4 feet above the ground or crop canopy.
x Applicators are required to use fine or coarser droplet size according to the most recent
version of the American Society of Agricultural and Biological Engineers Standard 572
(ASAE S572).
x Do not apply when wind speeds exceed 15 miles per hour at the application site.
x Do not apply during temperature inversions.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 8 of 27
Boomless Ground Applications:
x Applicators are required to use fine or coarser droplet size according to the most recent
version of the American Society of Agricultural and Biological Engineers Standard 572
(ASAE S572) for all applications.
x Do not apply when wind speeds exceed 15 miles per hour at the application site.
x Do not apply during temperature inversions.
SPRAY DRIFT ADVISORIES
THE APPLICATOR IS RESPONSIBLE FOR AVOIDING OFF-SITE SPRAY DRIFT.
BE AWARE OF NEARBY NON-TARGET SITES AND ENVIRONMENTAL CONDITIONS.
x IMPORTANCE OF DROPLET SIZE - An effective way to reduce spray drift is to apply
large droplets. Use the largest droplets that provide target pest control. While applying
larger droplets will reduce spray drift, the potential for drift will be greater if applications
are made improperly or under unfavorable environmental conditions.
x Controlling Droplet Size - Ground Boom
o Volume - Increasing the spray volume so that larger droplets are produced will
reduce spray drift. Use the highest practical spray volume for the application. If a
greater spray volume is needed, consider using a nozzle with a higher flow rate.
o Pressure - Use the lowest spray pressure recommended for the nozzle to
produce the target spray volume and droplet size.
o Spray Nozzle - Use a spray nozzle that is designed for the intended application.
Consider using nozzles designed to reduce drift.
x Controlling Droplet Size - Aircraft
o Adjust Nozzles - Follow nozzle manufacturers recommendations for setting up
nozzles. Generally, to reduce fine droplets, orient nozzles parallel with the
airflow in flight.
x BOOM HEIGHT - Ground Boom
o For ground equipment, the boom should remain level with the crop and have minimal
bounce.
x RELEASE HEIGHT - Aircraft
o Higher release heights increase the potential for spray drift.
x SHIELDED SPRAYERS
o Shielding the boom or individual nozzles can reduce spray drift. Consider using
shielded sprayers. Verify that the shields are not interfering with the uniform
deposition of the spray on the target area.
x TEMPERATURE AND HUMIDITY
o When making applications in hot and dry conditions, use larger droplets to reduce
effects of evaporation.
x TEMPERATURE INVERSIONS
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 9 of 27
o Drift potential is high during a temperature inversion. Temperature inversions are
characterized by increasing temperature with altitude and are common on nights with
limited cloud cover and light to no wind. The presence of an inversion can be
indicated by ground fog or by the movement of smoke from a ground source or an
aircraft smoke generator. Smoke that layers and moves laterally in a concentrated
cloud (under low wind conditions) indicates an inversion, while smoke that moves
upward and rapidly dissipates indicates good vertical air mixing. Avoid applications
during temperature inversions.
x WIND
o Drift potential increases with wind speed. AVOID APPLICATIONS DURING GUSTY
WIND CONDITIONS.
o Applicators need to be familiar with local wind patterns and terrain that could affect
spray drift.
x BOOMLESS GROUND APPLICATIONS
o Setting nozzles at the lowest effective height will help to reduce the potential for
spray drift.
Sensitive Areas
The pesticide should only be applied when the potential for drift to adjacent sensitive areas (e.g.
residential areas, bodies of water, known habitat for threatened or endangered species,
nontarget crops) is minimal (e.g. when wind is blowing away from the sensitive areas).
EQUIPMENT CLEANING
Do not allow the spray solution to dry in the application equipment. After application and
before using the sprayer equipment for any other applications, the sprayer must be
thoroughly cleaned. Applicators must ensure proper equipment clean-out for any other
products mixed with NAI-1295-2 Herbicide/Defoliant as provided on the other product
label(s). Immediately following application, clean all equipment thoroughly with detergent or a
spray tank cleaner and water as described below. Should residues of NAI-1295-2
Herbicide/Defoliant remain in inadequately cleaned equipment, they may be released in
subsequent applications and cause injury to crops.
1. Drain sprayer tank, hoses, and spray boom and thoroughly rinse with clean water the inside
of the spray tank, sprayer hoses, boom, and nozzles to remove any sediment or residues.
2. Fill the tank ½ full with clean water, add the appropriate detergent (follow manufacturer’s
directions for use). Fill tank to capacity and operate the sprayer with agitation for 15
minutes to flush hoses, boom, and nozzles.
3. Drain the sprayer tank, lines, and booms. Rinse the tank with clean water and flush through
the hoses, boom, and nozzles. Remove and clean spray nozzles, tips, and screens.
4. Dispose of all cleaning solutions, rinsate, and washwaters in accordance with Federal, state,
and local regulations.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 10 of 27
APPLICATION RATE CHART
CORN – (field corn, popcorn, seed corn, corn silage, corn stover)
Application Pest Rate/Acre Directions for Use
Preplant
burndown
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply in a minimum of 5 gallons spray solution per acre by
air or 10 gallons spray solution per acre by ground.
x The addition of a spray tank adjuvant at a concentration of
0.5% to 2.0% is recommended for optimum weed control.
x Use the higher rate for hard to control weeds
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not apply more than 2.0 fl oz/acre per season prior to
planting and/or emergence of crop.
x Allow a minimum of 30 days between applications for this
use.
At Plant,
Before Crop
Emergence
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply ET Herbicide/Defoliant in a minimum of 5 gallons
spray solution per acre by air or 10 gallons spray solution
per acre by ground.
x Do not apply more than 2.0 fl oz/acre per season at plant
and/or emergence of crop.
x Allow a minimum of 30 days between applications for this
use.
x The addition of a spray adjuvant at a concentration of
0.5% to 2.0% is recommended for optimum weed control.
Postemergence
Directed
Listed
Broadleaf
Weeds
0.5 to 1.0
fl oz/acre
x Do not apply postemergence to sweet corn.
x Apply in a minimum of 5 gallons spray solution per acre by
air or 10 gallons spray solution per acre by ground.
x Do not use crop oils or crop oil concentrates for
postemergence applications
x Can be applied from crop emergence to the V4 growth
stage.
x Some temporary herbicidal leaf speckling may appear on
the crop. This effect is transient and will NOT appear on
new growth.
x Use the higher rate for hard to control weeds.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not apply more than 1.0 fl oz per acre per season for
this use.
x Do not make more than 2 applications per season for this
use.
x Allow a minimum of 30 days between applications for this
use.
x Do not harvest corn for silage within 50 days after last
application.
x Do not harvest corn for grain or stover within 90 days after
last application.
CORN (all uses)
x Do not apply more than 3.0 fl oz/acre per growing season
for all preplant burndown, at plant, preemergence, and
postemergence uses.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Use the listed higher rates for hard to control weeds.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 11 of 27
COTTON
Application Pest Rate/Acre Directions for Use
Preplant
burndown,
At Plant,
Before Crop
Emergence
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply in a minimum of 5 gallons spray solution per
acre by air or 10 gallons spray solution per acre by
ground.
x The addition of a spray tank adjuvant at a
concentration of 0.5% to 2.0% is recommended for
optimum weed control.
x Use the higher rate for hard to control weeds.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not apply more than 2.0 fl oz per acre per season
for this use.
x Allow a minimum of 30 days between applications for
this use.
Post-
emergence
Listed
Broadleaf
Weeds
1.0 to 2.0
fl oz/acre
x Do NOT apply by air for this use.
x Apply to cotton having less than 3 inches of stem bark
using hooded ground equipment only.
x Avoid contact with desirable vegetation.
x Use the higher rate for hard to control weeds.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not exceed 2.0 fl oz per acre per season for this
use.
x Allow a minimum of 30 days between applications for
this use.
x Do not apply within 7 days of harvest.
x Use the higher rate for hard to control weeds.
Post-
emergence
Layby
Listed
Broadleaf
Weeds
0.5 to 1.0
fl oz/acre
x Do NOT apply by air for this use.
x Apply when the cotton has attained an average height
of 18 inches or more and having at least 3 inches of
stem bark using hooded or postdirected ground spray
equipment only.
x Avoid contact with desirable vegetation.
x Use the higher rate for hard to control weeds.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not apply more than 1.0 fl oz per acre per season
for this use.
x Allow a minimum of 30 days between applications for
this use.
x Do not apply within 7 days of harvest.
Defoliation Defoliation
of Cotton
1.5 to 2.75 fl
oz/acre
x Apply when sufficient open bolls (generally greater
than 60%) have developed to produce desired yield.
x Apply using 20 to 30 gallons of water per acre by
ground or 5 gallons of water per acre by air.
x Adequate defoliation is generally achieved within 7 to
14 days depending upon weather conditions.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
x Do not exceed 2 applications or 5.5 fl oz per acre per
season.
x Applications must be a minimum of 7 days apart.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 12 of 27
x Do not apply within 7 days of harvest.
x May be tank mixed or applied in sequence with other
defoliant products such as, but not limited to,
Cyclone®, DEF®, Dropp®, ethephon, Finish®,
Firstpick®, Folex®, Ginstar®, Gramoxone®, and/or
Roundup®.
All uses x Do not apply more than 8.5 fl oz per acre per growing
season to cotton.
POTATOES
Application Pest Rate/Acre Directions for Use
Desiccation Potato
Foliage
and Vines
L
isted
Broadleaf
Weeds
2.75 to 5.5 fl
oz/acre
x Apply by air at 5 gallons per acre or 20 to 50 gallons
per acre by ground equipment.
x Apply as a foliar spray in the early stage of crop
senescence.
x A repeat application of NAI-1295-2 Herbicide/Defoliant
or another desiccant may be needed under certain
climatic conditions for complete desiccation.
x Make 1 to 2 applications at a minimum 7 day interval.
x Do not exceed 2 applications or 11.0 fl oz per acre per
season for desiccation.
x Do not apply within 7 days of harvest.
x Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 13 of 27
SOYBEANS
Application Pest Rate/Acre Directions for Use
Preplant
burndown,
At plant, before
crop emergence
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
Ɣ Apply in a minimum of 5 gallons spray solution per acre
by air or 10 gallons spray solution per acre by ground.
Ɣ The addition of a spray tank adjuvant at a concentration
of 0.5% to 2.0% is recommended for optimum weed
control.
Ɣ Use the higher rate for hard to control weeds.
Ɣ Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
Ɣ Do not apply more than 2.0 fl oz per acre per season for
this use.
Ɣ Allow a minimum of 30 days between applications for this
use.
Postemergence
Listed
Broadleaf
Weeds
0.4 to 1.0
fl oz/acre
Ɣ Apply in a minimum of 5 gallons spray solution per acre
by air or 10 gallons spray solution per acre by ground.
Ɣ Do not use crop oils or crop oil concentrates for
postemergence applications.
Ɣ Can be applied from crop emergence to the V6 growth
stage.
Ɣ Some temporary herbicidal leaf speckling may appear on
the crop. This effect is transient and will NOT appear on
new growth.
Ɣ Use the higher rate for hard to control weeds.
Ɣ Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
Ɣ Do not apply more than 1.0 fl oz per acre per season for
this use.
Ɣ Allow a minimum of 30 days between applications for this
use.
Ɣ Do not make more than 2 applications per season for this
use.
Ɣ Do not graze soybean forage or cut for hay within 7 days
of last application.
Ɣ Do not harvest soybeans for grain within 70 days after last
application.
SOYBEAN (all uses)
Ɣ Do not apply more than 3.0 fl oz/acre per growing season
to soybeans.
Ɣ Refer to “Rotational Crop Restrictions” table above for
crop rotations/plantback restrictions.
Ɣ Use the higher rate for hard to control weeds.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 14 of 27
WHEAT, TRITICALE
Application Pest Rate/Acre Directions for Use
Preplant
burndown
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
Ɣ Apply in a minimum of 5 gallons spray solution per acre by
air or 10 gallons spray solution per acre by ground.
Ɣ The addition of a spray tank adjuvant at a concentration of
0.5% to 2.0% is recommended for optimum weed control.
Ɣ Use the higher rate for hard to control weeds.
Ɣ Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
Ɣ Do not apply more than 2.0 fl oz per acre per season for
this use.
Ɣ Allow a minimum of 30 days between applications for this
use.
At Plant,
Before Crop
Emergence
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
Ɣ Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 5
gallons spray solution per acre by air or 10 gallons spray
solution per acre by ground.
Ɣ Allow a minimum of 30 days between applications for this
use.
Ɣ Do not apply more than 2.0 fl oz/acre per season prior to
planting and/or emergence of crop.
Ɣ The addition of a COC adjuvant at a concentration of 1.0%
is recommended for optimum weed control.
Ɣ Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
Postemergence Listed
Broadleaf
Weeds
0.5 to 1.0
fl oz/acre
Ɣ Apply in a minimum of 5 gallons spray solution per acre by
air or 10 gallons spray solution per acre by ground.
Ɣ Use nonionic surfactant at a concentration of 0.5% for
optimum weed control.
Ɣ Can be applied from crop emergence to the appearance of
the flag leaf. DO NOT apply if the flag leaf is visible.
Ɣ Some temporary herbicidal leaf speckling may appear on
the crop. This effect is transient and will NOT appear on
new growth.
Ɣ Use the higher rate for hard to control weeds.
Ɣ Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
Ɣ Do not apply more than 1.0 fl oz per acre for this use per
season.
Ɣ Do not apply more than 2 applications per season.
Ɣ Allow a minimum of 30 days between applications for this
use.
Ɣ Do not harvest wheat or triticale for hay within 21 days of
last application.
Ɣ Do not harvest wheat or triticale for grain within 60 days
after last application.
WHEAT, TRITICALE
All uses
x Do not apply more than 3.0 fl oz/acre per growing season
for all preplant burndown, at plant, preemergence, and
postemergence uses.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 15 of 27
Crop Application Pest Rate/
Acre
Directions for Use
BULB
VEGETABLES
(Crop Group 3):
garlic, elephant
garlic, leek, dry
bulb, green and
Welch onion,
shallot
CEREAL GRAINS
(Crop Group 15):
barley, buckwheat,
corn, pearl and
proso millet, oats,
popcorn, rice, rye,
sorghum, teosinte,
triticale, wheat, wild
rice
COLE (BRASSICA)
CROPS (Crop
Group 5): broccoli,
Chinese broccoli,
broccoli raab,
Brussels sprouts,
cabbage, Chinese
cabbage both bok
choy and napa,
Chinese mustard
cabbage,
cauliflower, cavalo
broccolo, collards,
kale, kohlrabi,
mizuna, mustard
greens, mustard
spinach, rape
greens
CUCURBITS (Crop
Group 9): chayote,
Chinese waxgourd,
citron melon,
cucumber, gherkin,
edible gourd,
balsam apple,
balsam pear, bitter
melon, Chinese
cucumber,
muskmelons
including
cantaloupe, casaba,
crenshaw melon,
golden perhsaw
Pre-plant
Burndown
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply in a minimum of 10 gallons
spray solution per acre by ground
or 5 gallons water per acre by air.
x The addition of nonionic surfactant
at a concentration of 0.25% or COC
at 1.0% is recommended for
optimum weed control.
x Use the higher rate for hard to
control weeds.
x Refer to “Rotational Crop
Restrictions” table above for crop
rotations/plantback restrictions.
x Do not exceed 3 applications or 5.5
fl oz per acre per season.
x Allow a minimum of 30 days
between applications for this use.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 16 of 27
melon, honeydew
melon, honey balls,
mango melon,
Persian melon,
pineapple melon,
Santa Claus melon,
and snake melon,
pumpkin, winter
and summer
squash species,
watermelon
FRUITING
VEGETABLES
(Crop Group 8):
eggplant, ground
cherry, pepino,
pepper, including
bell pepper, chili
pepper, cooking
pepper, pimento,
sweet pepper,
tomatillo, tomato
L
EAFY
VEGETABLES
(Crop Group 4):
amaranth, arugula,
cardoon, celery,
Chinese celery,
celtuce, chervil,
edible
-leaved
chrysanthemum,
corn salad, garden
cress, upland cress,
dandelion, dock,
endive, fennel,
lettuce, orach,
parsley, purslane,
radicchio, rhubarb,
spinach, swiss
chard
LEGUME
VEGETABLES
(Crop Group 6):
beans, including
grain lupin, sweet
lupin, white lupin,
and white sweet
lupin, field bean,
kidney bean, lima
bean, navy bean,
pinto bean, runner
bean, snap bean,
Tepary bean, wax
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 17 of 27
bean, adzuki bean,
asparagus bean,
blackeyed pea,
catjang, Chinese
longbean, cowpea,
Crowder pea, moth
bean, mung bean,
rice bean, southern
pea, urd bean,
broadbean, yard
-
long bean, broad
bean, chickpea,
guar, Jackbean,
Lablab bean, lentil,
dwarf pea, edible
podded pea,
English pea, field
pea, garden pea,
green pea, snow
pea, sugar snap
pea, pigeon pea,
soybean, sword
bean
OIL SEED CROPS
(Crop Group 20):
borage, calendula,
castor oil plant,
Chinese tallowtree,
cottonseed,
crambe, cuphea,
echium, euphorbia,
evening primrose,
flax seed, gold of
pleasure, Hare’s ear
mustard, jojoba,
lesquerella, lunaria,
meadowfoam,
milkweed, mustard
seen, niger seed, oil
radish, poppy seed,
rapeseed [canola],
rose hip, safflower,
sunflower, sesame,
stokes aster, sweet
rocket, tallowwood,
tea oil plant, and
vernonia
ROOT AND TUBER
VEGETABLES
(Crop Group 1):
arracacha,
arrowroot, Chinese
and Jerusalem
artichoke, garden
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 18 of 27
beet, sugar beet,
edible burdock,
edible canna,
carrot, bitter
cassava, sweet
cassava, celeriac,
chayote, chervil,
chicory, chufa,
dasheen, ginger,
ginseng,
horseradish, leren,
parsley, parsnip,
potato, radish,
daikon, rutabaga,
salsify, skirret,
sweet potato,
tanier, turmeric,
turnip, yam bean,
true yam
SUGARCANE
Crop Application Pest Rate/Acre Maximum
Applications
Rate/Year
Directions for Use
GRAPES (bearing
and nonbearing)
OLIVE TREES
(bearing and
nonbearing)
POMEGRANATES
(bearing and
nonbearing)
POME FRUIT (Crop
Group 11) (bearing
and nonbearing)
apple, crabapple,
loquat, mayhaw,
pear, pear (oriental),
quince
STONE FRUIT (Crop
Group 12)
(bearing
and nonbearing)
apricot, cherry (sweet
and tart), nectarine,
peach, plum
(including chickasaw
plum, damson plum,
and Japanese plum),
plumcot, prune
Post-
harvest,
Dormant,
Prebloom
Listed
Broadle
af
Weeds
0.8 to 3.25
fl oz/acre
Do not
exceed 3
applications
or 5.5 fl oz
per acre per
season for
these uses.
x Do not apply by air
for this use.
x Apply in a
minimum of 20
gallons spray
solution per acre
by ground
equipment to
target weeds and
sucker growth.
x The addition of a
spray tank
adjuvant at a
concentration of
0.5% to 2.0% is
recommended for
optimum weed
control.
x
Do not allow
spray to drift onto
desirable fruit,
foliage or vines, as
damage will occur.
x Avoid contact with
green, uncallused
bark of young
vines established
less than one year,
unless protected
Sucker
Manage
ment
3.25
fl oz/acre
In-Season Listed
Broadle
af
Weeds
0.8 to 3.25
fl oz/acre
Do not
exceed 2
applications
or 5.5 fl oz
per acre per
season for
these uses.
Sucker
Manage
ment
3.25
fl oz/acre
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 19 of 27
TREE NUT (Crop
Group 14) (bearing
and nonbearing)
almond, beech nut,
Brazil nut, butternut,
cashew, chestnut,
chinquapin, filbert
(hazelnut),
macadamia nut,
pecan, pistachio,
walnut (black and
English)
from spray contact
by non-porous
wraps, grow tubes,
or waxed
containers.
x Use the higher
rate for hard to
control weeds.
x Allow a minimum
of 30 days
between
applications for
this use.
x For the
management of
undesirable sucker
growth on the
basal portion of
trunks, root
sprouts and vine
trunks. Growth
must be controlled
when the tissue is
young, immature
and/or not
hardened off.
Note: For use in California for sucker management only on Grapes, Stone
Fruit, Pome Fruit and Pomegranates. Not for use in California for sucker
management on Olive Trees and Tree Nuts.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 20 of 27
Crop Application Pest Rate/Acre Maximum
Applications
Rate/Year
Directions for Use
DATES, FEIJOA,
FIGS, KIWI FRUIT,
MANGO,
PERSIMMON
(bearing and
nonbearing)
Post-
harvest,
Dormant,
Prebloom
Listed
Broadleaf
Weeds
0.8 to 3.25
fl oz/acre
Do not
exceed 3
applications
per season
for th
is use.
x Do not exceed 5.5 fl
oz per acre per
season for all post-
harvest, dormant,
and prebloom
applications
combined.
x
Do not apply by air
for this use.
x Apply in a minimum
of 20 gallons spray
solution per acre by
ground equipment
to target weeds and
sucker growth.
x The addition of a
COC adjuvant at a
concentration of
1.0% is
recommended for
optimum weed
control.
x Do not allow spray
to drift onto
desirable fruit,
foliage or
vines/trees, as
damage will occur.
x Avoid contact with
green, uncallused
bark of young
trees/vines,
established less
than one year,
unless protected
from spray contact
by non-porous
wraps, grow tubes,
or waxed
containers.
x
Use the higher rate
for hard to control
weeds.
x Allow a minimum of
30 days between
applications for this
use.
x For the
management of
undesirable sucker
growth on the basal
Sucker
Management
(Not for
sucker
management
use on these
crops in
California)
2.5 to 3.25
fl oz/acre
Do not
exceed 2
applications
per season
for this use.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 21 of 27
portion of trunks,
root sprouts and
tree/vine trunks.
Growth must be
controlled when the
tissue is young,
immature and/or not
hardened off.
Crop Application Pest Rate/Acre Maximum
Applications
Rate/Year
Directions for Use
DATES, FEIJOA,
FIGS, KIWI
FRUIT, MANGO,
PERSIMMON
(Nonbearing only)
In-Season
Listed
Broadleaf
Weeds
0.8 to 3.25
fl oz/acre
Do not
exceed a
combined
total of 2
applications
per season
for these
uses.
x Do not exceed 5.5 fl oz
per acre per season for
all in season
applications combined.
x Do not apply by air for
this use.
x Apply in a minimum of
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 22 of 27
Sucker
Management
(Not for
sucker
management
use on these
crops in
California)
2.5 to 3.25
fl oz/acre
20 gallons spray
solution per acre by
ground equipment to
target weeds and
sucker growth.
x The addition of a COC
adjuvant at a
concentration of 1.0%
is recommended for
optimum weed control.
x Do not allow spray to
drift onto desirable fruit,
foliage, vines or trees,
as damage will occur.
x Avoid contact with
green, uncallused bark
of young trees or vines,
established less than
one year, unless
protected from spray
contact by non-porous
wraps, grow tubes, or
waxed containers.
x Use the higher rate for
hard to control weeds.
x Allow a minimum of 30
days between
applications.
x For the management of
undesirable sucker
growth on the basal
portion of trunks, root
sprouts and tree/vine
trunks. Growth must
be controlled when the
tissue is young,
imm
ature and/or not
hardened off.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 23 of 27
Crop Application Pest Rate/Acre Maximum
Applications
Rate/Year
Directions for Use
Nonbearing tree
fruit, Nut trees and
Vine crops
(Excluding citrus)
Full season
weed control
Listed
broadleaf
weeds
0.5 to 2.0
fl oz/acre
x Do not apply by air for
this use.
x Apply in a minimum of
20 gallons spray
solution per acre by
ground equipment to
target weeds and
sucker growth.
x Do not make more than
3 applications or
exceed 5.5 fl oz per
acre during the growing
season.
x The addition of a COC
adjuvant at a
concentration of 0.5%
to 2.0% is
recommended for
optimum weed control.
x Do not allow spray to
drift onto desirable fruit,
foliage, vines or trees,
as damage will occur.
x Use the higher rate for
hard to control weeds.
x Allow a minimum of 30
days between
applications.
x For crops not listed on
this label, do not
harvest edible crops for
12 months following the
last application.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 24 of 27
PREPLANT BURNDOWN FALLOW BED AND CROP STUBBLE
Pest Rate/Acre Directions for Use
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply in a minimum of 5 gallons spray solution by air and 10 gallons per
acre by ground.
x The addition of a spray tank adjuvant at a concentration of 0.5% to 2.0% is
recommended for optimum weed control.
x Use the higher rate for hard to control weeds.
x Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
x Do not make more than 3 applications or exceed 5.5 fl oz per acre during
the fallow period.
x Allow a minimum of 30 days between applications for this use.
NON-CROPLAND, UNCULTIVATED AGRICULTURAL AREAS, CONSERVATION RESERVE
PROGRAM LAND/FEDERAL SET-ASIDE ACREAGE* (NON FOOD PRODUCING)
Pest Rate/Acre Directions for Use
Listed
Broadleaf
Weeds
0.5 to 2.0
fl oz/acre
x Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 5 gallons of spray
solutionper acre by air or 10 gallons spray solution per acre by ground.
x Allow a minimum of 30 days between applications for this use.
x Do not make more than 3 applications or exceed 5.5 fl oz/acre during the
fallow period.
x The addition of a COC adjuvant at a concentration of 1.0% is
recommended for optimum weed control.
x Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
x Use the higher rate for hard to control weeds.
*Follow federal, state and local rules for use on grass and hay.
NONCROP WEED CONTROL:
AIRPORTS AND AIRFIELDS, COMMERCIAL PLANTS, STORAGE AND LUMBER YARDS,
FENCELINES AND FENCE ROWS, FARMYARDS AND FARM BUILDINGS, BARRIER
STRIPS AND FIREBREAKS, EQUIPMENT AREAS, NURSERIES AND ORNAMENTAL
PLANTINGS, CHRISTMAS TREES AND CONIFER PLANTATION SITE PREPARATION,
RAILROADS, ROADSIDE AND UTILITY RIGHTS-OF-WAY, FUEL TANK FARMS AND
PUMPING STATIONS, DRY DITCHES AND DITCHBANKS, VACANT LOTS, OR OTHER
LISTED AGRICULTURAL AND INDUSTRIAL NON-CROP SITES
Pest Rate/Acre Directions for Use
Listed
Broadleaf
Weeds
0.5 to 2.75
fl oz/acre
x Apply NAI-1295-2 Herbicide/Defoliant in a minimum of 20 to 40 gallons
spray solution per acre by ground.
x Do not apply by air for this use.
x Avoid contact with desirable vegetation.
x The addition of a COC adjuvant at a concentration of 1.0% is
recommended for optimum weed control.
x Do not make more than 3 applications or exceed 9.7 fl oz/acre per season
using ground or backpack or similar spray equipment.
x Use the higher rate for hard to control weeds.
x For applications to ornamental plantings, do not allow people (other than
the applicator) or pets on treatment area during the application and until
sprays have dried.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 25 of 27
ESTABLISHED ORNAMENTAL TURF LAWNS (RESIDENTIAL, INDUSTRIAL, AND
INSTITUTIONAL) PARKS, CEMETERIES, ATHLETIC FIELDS, GOLF COURSES
(FAIRWAYS, APRONS, TEES, AND ROUGHS), SOD FARMS, AND SIMILAR TURF AREAS
For applications to ornamental turf, do not allow people (other than the applicator) or pets on
treatment area during the application and until sprays have dried.
Spray Concentrate
Make an appropriate amount of spray concentrate for the area to be treated by adding 8 fl oz of
ET Herbicide/Defoliant to 120 fl oz of water (e.g., 1 fl oz ET Herbicide/Defoliant to 15 fl oz water,
or 0.5 fl oz ET Herbicide/Defoliant to 7.5 fl oz water). Use the appropriate amount of
concentrate as specified in the dosage tables below for application by pressure (pump-up)
sprayer, hose-end applicator, or similar application equipment.
Spot treatment: Pressure sprayer (Pump-up Sprayer)
Adjust spray nozzle to give coarse spray. Aim at center of weed and spray to wet. A repeat
application may be required for hard-to-kill broadleaf weeds. Do not use a hose-end sprayer for
spot treatments.
Turf Species
Amount of Spray
Concentrate (fl oz)
Amount of water to
be applied (gallons)
Area treated
(square feet)
Cool season grasses:
bluegrass, fescue, ryegrass
Warm season grasses:
bahiagrass, common bermudagrass,
centipedegrass, St. Augustine grass,
zoysia grass
1.0 4 1000
0.5 2 500
Entire lawn: Dial Type Hose-End Sprayer
Spray lawn using coarse spray. Apply evenly over area to be treated. One application should
be sufficient. Effects begin to show after 24 to 48 hours with plant death occurring within 7 to 14
days.
1) Measure the total square footage area to be sprayed. To determine the total square foot
area, multiply the length by the width of the lawn area to be treated. Subtract square
footage of non-treatment areas including flower beds, shrub beds, driveways and sidewalks.
2) The application rate of this product is indicated in the following table for every per 1,000
square feet of lawn area. Add the appropriate amount of this product to the spray bottle,
[jar], [reservoir], as indicated in the table for every 1,000 sq. ft. of lawn area to be treated.
3) Set the dial to the correct fluid ounce setting mix rate indicated in the following table.
4) Connect the hose, turn on water and spray evenly over the lawn treatment area.
5) Monitor the spray solution level in the spray bottle, [jar]. [reservoir], to gauge coverage.
Turf Species Area to be Treated
(square feet)
Amount of spray
concentrate (fluid ounces)
Dial-type Hose-end
sprayer mix setting
(fl oz per gallon)
Cool season grasses:
bluegrass, fescue,
ryegrass
1000 1.0
2.0 fl oz 5000 5.0
8000 8.0
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 26 of 27
Broadcast Application: Spray using coarse spray. Apply evenly over area to be treated.
Turf Species Amount of Spray Concentrate
(fluid ounces)
Area treated
(square feet)
Cool season grasses: bluegrass, fescue,
ryegrass
Warm season grasses: bahiagrass, common;
bermudagrass; centipedegrass; St Augustine
grass; zoysia grass
1.0 1000
5.0 5000
8.0 8000
PASTURE AND RANGELAND
Pest Rate/Acre Directions for Use
Listed
Broadleaf
Weeds
0.75 to 2.25
fl oz/acre
x Allow a minimum of 14 days between applications for this use.
x Do not make more than 2 applications or exceed 5.5 fl oz/acre per season
for this use.
x Livestock may graze treated areas as soon a the spray solution has dried
on the foliage.
x The addition of a crop oil or spray tank adjuvant at a concentration of
0.5% to 1.0% is recommended for optimum weed control.
x Refer to “Rotational Crop Restrictions” table above for crop
rotations/plantback restrictions.
x Apply in a minimum of 2 gallons water per acre by air or 10 gallons water
per acre by ground for this application.
x Use the higher rate for hard to control weeds.
STORAGE AND DISPOSAL
DO NOT contaminate water, food, or feed by storage or disposal. Open dumping is prohibited.
Pesticide Storage: Store in a cool place.
Pesticide Disposal: Pesticide wastes are toxic. Improper disposal of excess pesticide,
pesticide spray or rinsate is a violation of Federal law. If these wastes cannot be disposed of by
use according to label instructions, contact your State Pesticide or Environmental Control
Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for
guidance.
Container Disposal: Nonrefillable container. DO NOT reuse or refill this container. Triple
rinse (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining
contents into application equipment or a mix tank and drain for 10 seconds after the flow begins
to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into
application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10
seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for
recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration,
or, if allowed by State or local authorities, by burning. If burned, stay out of smoke.
IMPORTANT: READ BEFORE USE
By using this product, user or buyer accepts the following conditions, warranty, disclaimer of
warranties, and limitations of liability.
CONDITIONS: The directions for use of this product are believed to be accurate and must be
followed carefully. However, because of extreme weather and soil conditions, use methods and
other factors beyond the control of Nichino Americ a, Inc. (NAI), it is impossible for NAI to
eliminate all risks associated with the use of this product. As a result, crop injury or
ineffectiveness is always possible. To the extent co nsistent with applicable law, all such risks
are assumed by the user or buyer.
{NAI-1295-2 71711-42}
MAS-513-2 08202021-2
Page 27 of 27
DISCLAIMER OF WARRANTIES: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW,
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE
STATEMENTS MADE ON THIS LABEL. No agent of NAI is authorized to make any warranties
beyond those contained herein or to modify the warranties contained herein. To the extent
consistent with applicable law, NAI disclaims an y liability whatsoever for incidental or
consequential damages, including, but not limited to , liability arising out of breach of contract,
express or implied warranty (including warranties of merchantability and fitness for a particular
purpose), tort, negligence, strict liability, or otherwise.
LIMITATIONS OF LIABILITY: TO THE EXTENT CONSISTENT WITH APPLICABLE LAW,
THE EXCLUSIVE REMEDY OF THE USER OR BUYER FOR ANY AND ALL LOSSES,
INJURIES OR DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT,
WHETHER IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY, OR
OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID, OR AT THE ELECTION
OF NICHINO AMERICA, THE REPLACEMENT OF PRODUCT.
© 2020. Nichino America, Inc.
Cottonquik
® is a trademark of duPont Corporation. Cyclone®, and Gramoxone®, are trademarks
of Syngenta Crop Protection. DEF ® 6, Dropp ® 50WP, Finish ® , Ginstar ®, and Prep™ are
trademarks of Bayer Crop Science. Roundup ® is a trademark of Monstanto Company. Folex ®
6EC is a trademark of Amvac.